Bug#613170: linux-image-2.6.32-5-openvz-amd64: OpenVZ-specific NFS implementation error
Package: linux-2.6
Version: 2.6.32-30
Severity: important
Tags: patch
See OpenVZ bugzilla for details:
http://bugzilla.openvz.org/show_bug.cgi?id=1626
Patch #1:
http://1626.bugzilla.openvz.org/attachment.cgi?id=1376
Patch #2:
http://1626.bugzilla.openvz.org/attachment.cgi?id=1377
Please, include these packages into further
OpenVZ-modificated kernel releases.
-- Package-specific info:
** Version:
Linux version 2.6.32-5-openvz-amd64 (Debian 2.6.32-30) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Jan 12 04:22:50 UTC 2011
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.32-5-openvz-amd64 root=/dev/mapper/pve-root ro elevator=noop elevator=noop
** Not tainted
** Kernel log:
[ 0.713916] NET: Registered protocol family 10
[ 0.715811] Mobile IPv6
[ 0.716732] NET: Registered protocol family 17
[ 0.717953] PM: Resume from disk failed.
[ 0.717962] registered taskstats version 1
[ 0.719659] rtc_cmos rtc_cmos: setting system clock to 2011-02-13 12:24:28 UTC (1297599868)
[ 0.723505] Initalizing network drop monitor service
[ 0.726443] Freeing unused kernel memory: 592k freed
[ 0.727468] Write protecting the kernel read-only data: 4144k
[ 1.275024] usbcore: registered new interface driver usbfs
[ 1.279448] usbcore: registered new interface driver hub
[ 1.296162] usbcore: registered new device driver usb
[ 1.309065] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.317461] alloc irq_desc for 19 on node -1
[ 1.317464] alloc kstat_irqs on node -1
[ 1.317501] virtio-pci 0000:00:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.319396] SCSI subsystem initialized
[ 1.354888] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.356385] alloc irq_desc for 22 on node -1
[ 1.356388] alloc kstat_irqs on node -1
[ 1.356424] ohci_hcd 0000:00:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.357109] ohci_hcd 0000:00:06.0: OHCI Host Controller
[ 1.357109] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 1
[ 1.357109] ohci_hcd 0000:00:06.0: irq 22, io mem 0xf0404000
[ 1.357109] libata version 3.00 loaded.
[ 1.444345] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.445628] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.447493] usb usb1: Product: OHCI Host Controller
[ 1.448049] usb usb1: Manufacturer: Linux 2.6.32-5-openvz-amd64 ohci_hcd
[ 1.448049] usb usb1: SerialNumber: 0000:00:06.0
[ 1.451365] usb usb1: configuration #1 chosen from 1 choice
[ 1.452887] hub 1-0:1.0: USB hub found
[ 1.454060] hub 1-0:1.0: 8 ports detected
[ 1.455441] ahci 0000:00:0d.0: version 3.0
[ 1.455526] alloc irq_desc for 21 on node -1
[ 1.455529] alloc kstat_irqs on node -1
[ 1.455564] ahci 0000:00:0d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 1.456953] ahci: SSS flag set, parallel bus scan disabled
[ 1.458376] ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[ 1.459398] ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc
[ 1.471669] scsi0 : ahci
[ 1.474144] ata1: SATA max UDMA/133 abar m8192@0xf0406000 port 0xf0406100 irq 21
[ 1.800189] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.801551] ata1.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
[ 1.802993] ata1.00: 20971520 sectors, multi 128: LBA48 NCQ (depth 31/32)
[ 1.805253] ata1.00: configured for UDMA/133
[ 1.806822] scsi 0:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
[ 1.823970] sd 0:0:0:0: [sda] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
[ 1.825593] sd 0:0:0:0: [sda] Write Protect is off
[ 1.826760] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.827340] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.829301] sda: sda1 sda2
[ 1.832285] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.860175] usb 1-1: new full speed USB device using ohci_hcd and address 2
[ 2.000246] device-mapper: uevent: version 1.0.3
[ 2.002464] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 2.109893] usb 1-1: New USB device found, idVendor=80ee, idProduct=0021
[ 2.111208] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 2.112044] usb 1-1: Product: USB Tablet
[ 2.112044] usb 1-1: Manufacturer: VirtualBox
[ 2.117465] usb 1-1: configuration #1 chosen from 1 choice
[ 2.193503] usbcore: registered new interface driver hiddev
[ 2.202969] input: VirtualBox USB Tablet as /devices/pci0000:00/0000:00:06.0/usb1/1-1/1-1:1.0/input/input2
[ 2.205604] generic-usb 0003:80EE:0021.0001: input,hidraw0: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:06.0-1/input0
[ 2.207921] usbcore: registered new interface driver usbhid
[ 2.209622] usbhid: v2.6:USB HID core driver
[ 2.323826] kjournald starting. Commit interval 5 seconds
[ 2.324882] EXT3-fs: mounted filesystem with ordered data mode.
[ 2.834365] udev[212]: starting version 164
[ 3.223553] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 3.279960] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 3.280061] ACPI: Power Button [PWRF]
[ 3.378651] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input5
[ 3.379883] ACPI: Sleep Button [SLPF]
[ 3.384408] piix4_smbus 0000:00:07.0: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
[ 3.386605] processor LNXCPU:00: registered as cooling_device0
[ 3.590596] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input6
[ 3.607136] ACPI: AC Adapter [AC] (on-line)
[ 3.818649] parport_pc 00:04: reported by Plug and Play ACPI
[ 4.480985] EXT3 FS on dm-0, internal journal
[ 4.869913] RPC: Registered udp transport module.
[ 4.871152] RPC: Registered tcp transport module.
[ 4.871962] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 4.975066] Slow work thread pool: Starting up
[ 4.993072] Slow work thread pool: Ready
[ 4.995681] FS-Cache: Loaded
[ 5.150341] FS-Cache: Netfs 'nfs' registered for caching
[ 5.991601] Adding 1310712k swap on /dev/mapper/pve-swap. Priority:-1 extents:1 across:1310712k
[ 6.194619] kjournald starting. Commit interval 5 seconds
[ 6.196417] EXT3 FS on dm-2, internal journal
[ 6.197304] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.200359] kjournald starting. Commit interval 5 seconds
[ 6.201667] EXT3 FS on sda1, internal journal
[ 6.202939] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.174828] Bridge firewalling registered
[ 7.255222] device eth0 entered promiscuous mode
[ 7.300335] vmbr0: port 1(eth0) entering forwarding state
[ 16.615853] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 18.076098] eth0: no IPv6 routers present
[ 18.152051] vmbr0: no IPv6 routers present
** Model information
sys_vendor: innotek GmbH
product_name: VirtualBox
product_version: 1.2
bios_vendor: innotek GmbH
bios_version: VirtualBox
** Loaded modules:
Module Size Used by
vzethdev 7301 0
vznetdev 17967 0
simfs 3087 0
vzrst 110318 0
vzcpt 97042 0
vzdquota 35158 0 [permanent]
vzmon 16317 4 vzethdev,vznetdev,vzrst,vzcpt
vzdev 1824 4 vzethdev,vznetdev,vzdquota,vzmon
xt_tcpudp 2319 0
xt_length 1164 0
xt_hl 1313 0
xt_tcpmss 1401 0
xt_TCPMSS 2935 0
iptable_mangle 2881 0
iptable_filter 2322 0
xt_multiport 2267 0
xt_limit 1782 0
xt_dscp 1805 0
ipt_REJECT 1953 0
ip_tables 14107 2 iptable_mangle,iptable_filter
x_tables 13213 10 xt_tcpudp,xt_length,xt_hl,xt_tcpmss,xt_TCPMSS,xt_multiport,xt_limit,xt_dscp,ipt_REJECT,ip_tables
bridge 40774 0
stp 1440 1 bridge
nfs 244058 0
lockd 58772 1 nfs
fscache 29850 1 nfs
nfs_acl 2031 1 nfs
auth_rpcgss 33476 1 nfs
sunrpc 164669 5 nfs,lockd,nfs_acl,auth_rpcgss
parport_pc 18855 0
parport 27954 1 parport_pc
ac 2192 0
joydev 8475 0
psmouse 49777 0
i2c_piix4 8328 0
processor 29999 0
button 4682 0
serio_raw 3768 0
evdev 7368 0
i2c_core 15712 1 i2c_piix4
pcspkr 1699 0
ext3 106470 3
jbd 37053 1 ext3
mbcache 5050 1 ext3
usbhid 33308 0
hid 63273 1 usbhid
dm_mod 53786 9
sd_mod 29857 3
crc_t10dif 1276 1 sd_mod
ahci 32374 2
virtio_net 10513 0
ohci_hcd 19228 0
libata 133568 1 ahci
thermal 11754 0
virtio_pci 5535 0
virtio_ring 3210 1 virtio_pci
ehci_hcd 31167 0
thermal_sys 11942 2 processor,thermal
virtio 3309 2 virtio_net,virtio_pci
scsi_mod 122181 2 sd_mod,libata
usbcore 122194 4 usbhid,ohci_hcd,ehci_hcd
nls_base 6377 1 usbcore
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 440FX - 82441FX PMC [Natoma] [8086:1237] (rev 02)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:01.0 ISA bridge [0601]: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] [8086:7000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:02.0 VGA compatible controller [0300]: InnoTek Systemberatung GmbH VirtualBox Graphics Adapter [80ee:beef] (prog-if 00 [VGA controller])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=16M]
Expansion ROM at <unassigned> [disabled]
00:03.0 Ethernet controller [0200]: Red Hat, Inc Virtio network device [1af4:1000]
Subsystem: Red Hat, Inc Device [1af4:0001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at d000 [size=32]
Capabilities: [80] #00 [0000]
Kernel driver in use: virtio-pci
00:04.0 System peripheral [0880]: InnoTek Systemberatung GmbH VirtualBox Guest Service [80ee:cafe]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at d020 [size=32]
Region 1: Memory at f0000000 (32-bit, non-prefetchable) [size=4M]
Region 2: Memory at f0400000 (32-bit, prefetchable) [size=16K]
00:06.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo/Intrepid USB [106b:003f] (prog-if 10 [OHCI])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 22
Region 0: Memory at f0404000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:07.0 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 08)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 9
00:0d.0 SATA controller [0106]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller [8086:2829] (rev 02) (prog-if 01 [AHCI 1.0])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at d040 [size=8]
Region 1: I/O ports at <ignored>
Region 2: I/O ports at d050 [size=8]
Region 3: I/O ports at <ignored>
Region 4: I/O ports at d060 [size=16]
Region 5: Memory at f0406000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ahci
** Sound cards:
-- System Information:
Debian Release: 6.0
APT prefers stable
APT policy: (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-openvz-amd64 (SMP w/1 CPU core)
Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.32-5-openvz-amd64 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-init 0.98.8 tools for generating an initramfs
ii linux-base 2.6.32-31 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
hi vzctl 3.0.24-1pve4 OpenVZ - server virtualization sol
Versions of packages linux-image-2.6.32-5-openvz-amd64 recommends:
pn firmware-linux-free <none> (no description available)
Versions of packages linux-image-2.6.32-5-openvz-amd64 suggests:
ii grub 0.97-64 GRand Unified Bootloader (dummy pa
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-openvz-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-openvz-amd64/postinst/ignoring-do-bootloader-2.6.32-5-openvz-amd64:
linux-image-2.6.32-5-openvz-amd64/postinst/missing-firmware-2.6.32-5-openvz-amd64:
linux-image-2.6.32-5-openvz-amd64/postinst/depmod-error-initrd-2.6.32-5-openvz-amd64: false
linux-image-2.6.32-5-openvz-amd64/prerm/removing-running-kernel-2.6.32-5-openvz-amd64: true
Reply to: