Bug#613052: hisax: Elsa QuickStep 1000 not working
Package: linux-image-2.6.32-5-amd64
Version: 2.6.32-30
After upgrading to kernel 2.6.32, my ISDN card is not working anymore.
It looks like the driver can't get the io ports.
The same system with kernel 2.6.26 works alright.
lspci says:
06:01.0 Network controller: Elsa AG QuickStep 1000 (rev 02)
/proc/ioports:
...
d000-dfff : PCI Bus 0000:06
d480-d483 : 0000:06:01.0
d480-d483 : qs1000.1
d800-d87f : 0000:06:01.0
d800-d87f : qs1000.1
...
When I load the driver (options hisax type=18 protocol=2 id=teles0)
the following is logged:
...
ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded
HiSax: Linux Driver for passive ISDN cards
HiSax: Version 3.5 (module)
HiSax: Layer1 Revision 2.46.2.5
HiSax: Layer2 Revision 2.30.2.4
HiSax: TeiMgr Revision 2.20.2.3
HiSax: Layer3 Revision 2.22.2.3
HiSax: LinkLayer Revision 2.59.2.4
HiSax: Total 1 card defined
HiSax: Card 1 Protocol EDSS1 Id=teles0 (0)
HiSax: Elsa driver Rev. 2.32.2.4
Elsa: Microlink PCI defined at 0xd480/0xd800 IRQ 22
HiSax: ELSA config port 0xd480-0xd482 already in use
HiSax: Card Elsa PCI not installed !
Here for comparison the same thing with linux-image-2.6.26-2-amd64:
...
ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded
HiSax: Linux Driver for passive ISDN cards
HiSax: Version 3.5 (module)
HiSax: Layer1 Revision 2.46.2.5
HiSax: Layer2 Revision 2.30.2.4
HiSax: TeiMgr Revision 2.20.2.3
HiSax: Layer3 Revision 2.22.2.3
HiSax: LinkLayer Revision 2.59.2.4
HiSax: Total 1 card defined
HiSax: Card 1 Protocol EDSS1 Id=teles0 (0)
HiSax: Elsa driver Rev. 2.32.2.4
ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 22 (level, low) -> IRQ 22
Elsa: Microlink PCI defined at 0xd480/0xd800 IRQ 22
Elsa: IPAC version 2
Elsa PCI: IRQ 22 count 0
Elsa PCI: IRQ 22 count 3
HiSax: DSS1 Rev. 2.32.2.3
HiSax: 2 channels added
HiSax: MAX_WAITING_CALLS added
Reply to: