Bug#612911: linux-image-2.6.32-5-openvz-amd64: Deprecated CIFS module
reassign cifs-utils
retitle cifs-utils maybe broken on 2.6.32-30
stop
On Fri, Feb 11, 2011 at 04:44:56PM +0300, Stanislav Klinkov wrote:
> Package: linux-2.6
> Version: 2.6.32-30
> Severity: important
>
> The package "linux-image-2.6.32-5-openvz-amd64" is shipped with a deprecated version
> of the CIFS module ("cifs.ko"). So, userspace utilities such as "mount.cifs"
> become incompatible with old version of cifs.ko and refuse to work.
>
> For example, one can mount nothing via CIFS. Rolling back the packages
> "cifs-utils", "samba-common", "smbfs', etc down to Lenny or Lenny-backports
> bundles resolves the issue as a temporary workaround.
reassigning for you, the userspace is maybe at fault, the linux image
is setting the rules. please provide command output for what doesn't work
with squeeze cifs-utils? (and eventual strace)
> -- Package-specific info:
> ** Version:
> Linux version 2.6.32-5-openvz-amd64 (Debian 2.6.32-30) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Jan 12 04:22:50 UTC 2011
>
> ** Command line:
> BOOT_IMAGE=/vmlinuz-2.6.32-5-openvz-amd64 root=/dev/mapper/pve-root ro elevator=noop elevator=noop
>
> ** Not tainted
>
> ** Kernel log:
> [ 0.731462] NET: Registered protocol family 10
> [ 0.733485] Mobile IPv6
> [ 0.734773] NET: Registered protocol family 17
> [ 0.736174] PM: Resume from disk failed.
> [ 0.736183] registered taskstats version 1
> [ 0.737687] rtc_cmos rtc_cmos: setting system clock to 2011-02-11 12:45:25 UTC (1297428325)
> [ 0.739748] Initalizing network drop monitor service
> [ 0.740962] Freeing unused kernel memory: 592k freed
> [ 0.743100] Write protecting the kernel read-only data: 4144k
> [ 1.321118] usbcore: registered new interface driver usbfs
> [ 1.323699] usbcore: registered new interface driver hub
> [ 1.331019] alloc irq_desc for 19 on node -1
> [ 1.331048] alloc kstat_irqs on node -1
> [ 1.331116] virtio-pci 0000:00:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
> [ 1.335636] usbcore: registered new device driver usb
> [ 1.362972] SCSI subsystem initialized
> [ 1.369334] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 1.396113] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> [ 1.397485] alloc irq_desc for 22 on node -1
> [ 1.397485] alloc kstat_irqs on node -1
> [ 1.397485] ohci_hcd 0000:00:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
> [ 1.398628] ohci_hcd 0000:00:06.0: OHCI Host Controller
> [ 1.400015] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 1
> [ 1.404766] libata version 3.00 loaded.
> [ 1.409576] ohci_hcd 0000:00:06.0: irq 22, io mem 0xf0404000
> [ 1.431952] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
> [ 1.432033] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 1.434672] usb usb1: Product: OHCI Host Controller
> [ 1.435951] usb usb1: Manufacturer: Linux 2.6.32-5-openvz-amd64 ohci_hcd
> [ 1.437321] usb usb1: SerialNumber: 0000:00:06.0
> [ 1.439427] usb usb1: configuration #1 chosen from 1 choice
> [ 1.440853] hub 1-0:1.0: USB hub found
> [ 1.442013] hub 1-0:1.0: 8 ports detected
> [ 1.443442] ahci 0000:00:0d.0: version 3.0
> [ 1.443529] alloc irq_desc for 21 on node -1
> [ 1.443532] alloc kstat_irqs on node -1
> [ 1.443570] ahci 0000:00:0d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
> [ 1.445364] ahci: SSS flag set, parallel bus scan disabled
> [ 1.448318] ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
> [ 1.450361] ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc
> [ 1.469660] scsi0 : ahci
> [ 1.471251] ata1: SATA max UDMA/133 abar m8192@0xf0406000 port 0xf0406100 irq 21
> [ 1.792845] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 1.794291] ata1.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
> [ 1.795521] ata1.00: 20971520 sectors, multi 128: LBA48 NCQ (depth 31/32)
> [ 1.797646] ata1.00: configured for UDMA/133
> [ 1.799123] scsi 0:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
> [ 1.815209] sd 0:0:0:0: [sda] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
> [ 1.818080] sd 0:0:0:0: [sda] Write Protect is off
> [ 1.819340] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 1.819362] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 1.821937] sda: sda1 sda2
> [ 1.824076] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 1.848631] usb 1-1: new full speed USB device using ohci_hcd and address 2
> [ 2.006911] device-mapper: uevent: version 1.0.3
> [ 2.009189] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
> [ 2.124311] usb 1-1: New USB device found, idVendor=80ee, idProduct=0021
> [ 2.125707] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
> [ 2.127150] usb 1-1: Product: USB Tablet
> [ 2.128157] usb 1-1: Manufacturer: VirtualBox
> [ 2.140214] usb 1-1: configuration #1 chosen from 1 choice
> [ 2.204639] usbcore: registered new interface driver hiddev
> [ 2.222702] input: VirtualBox USB Tablet as /devices/pci0000:00/0000:00:06.0/usb1/1-1/1-1:1.0/input/input2
> [ 2.224822] generic-usb 0003:80EE:0021.0001: input,hidraw0: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:06.0-1/input0
> [ 2.227787] usbcore: registered new interface driver usbhid
> [ 2.229763] usbhid: v2.6:USB HID core driver
> [ 2.337002] kjournald starting. Commit interval 5 seconds
> [ 2.338350] EXT3-fs: mounted filesystem with ordered data mode.
> [ 2.881904] udev[210]: starting version 164
> [ 3.363784] input: PC Speaker as /devices/platform/pcspkr/input/input3
> [ 3.449661] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
> [ 3.451867] ACPI: Power Button [PWRF]
> [ 3.482383] piix4_smbus 0000:00:07.0: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
> [ 3.572389] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input5
> [ 3.574497] ACPI: Sleep Button [SLPF]
> [ 3.575894] processor LNXCPU:00: registered as cooling_device0
> [ 3.598862] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input6
> [ 3.675877] ACPI: AC Adapter [AC] (on-line)
> [ 3.908720] parport_pc 00:04: reported by Plug and Play ACPI
> [ 4.663318] EXT3 FS on dm-0, internal journal
> [ 5.113253] RPC: Registered udp transport module.
> [ 5.114743] RPC: Registered tcp transport module.
> [ 5.115928] RPC: Registered tcp NFSv4.1 backchannel transport module.
> [ 5.227364] Slow work thread pool: Starting up
> [ 5.241082] Slow work thread pool: Ready
> [ 5.243341] FS-Cache: Loaded
> [ 5.361733] FS-Cache: Netfs 'nfs' registered for caching
> [ 6.372846] Adding 1310712k swap on /dev/mapper/pve-swap. Priority:-1 extents:1 across:1310712k
> [ 6.562513] kjournald starting. Commit interval 5 seconds
> [ 6.564919] EXT3 FS on dm-2, internal journal
> [ 6.566314] EXT3-fs: mounted filesystem with ordered data mode.
> [ 6.568832] kjournald starting. Commit interval 5 seconds
> [ 6.570162] EXT3 FS on sda1, internal journal
> [ 6.571550] EXT3-fs: mounted filesystem with ordered data mode.
> [ 7.627126] Bridge firewalling registered
> [ 7.739697] device eth0 entered promiscuous mode
> [ 7.781377] vmbr0: port 1(eth0) entering forwarding state
> [ 17.824333] ip_tables: (C) 2000-2006 Netfilter Core Team
> [ 18.016469] vmbr0: no IPv6 routers present
> [ 18.516033] eth0: no IPv6 routers present
>
> ** Model information
> sys_vendor: innotek GmbH
> product_name: VirtualBox
> product_version: 1.2
> bios_vendor: innotek GmbH
> bios_version: VirtualBox
>
> ** Loaded modules:
> Module Size Used by
> vzethdev 7301 0
> vznetdev 17967 0
> simfs 3087 0
> vzrst 110318 0
> vzcpt 97042 0
> vzdquota 35158 0 [permanent]
> vzmon 16317 4 vzethdev,vznetdev,vzrst,vzcpt
> vzdev 1824 4 vzethdev,vznetdev,vzdquota,vzmon
> xt_tcpudp 2319 0
> xt_length 1164 0
> xt_hl 1313 0
> xt_tcpmss 1401 0
> xt_TCPMSS 2935 0
> iptable_mangle 2881 0
> iptable_filter 2322 0
> xt_multiport 2267 0
> xt_limit 1782 0
> xt_dscp 1805 0
> ipt_REJECT 1953 0
> ip_tables 14107 2 iptable_mangle,iptable_filter
> x_tables 13213 10 xt_tcpudp,xt_length,xt_hl,xt_tcpmss,xt_TCPMSS,xt_multiport,xt_limit,xt_dscp,ipt_REJECT,ip_tables
> bridge 40774 0
> stp 1440 1 bridge
> nfs 244058 0
> lockd 58772 1 nfs
> fscache 29850 1 nfs
> nfs_acl 2031 1 nfs
> auth_rpcgss 33476 1 nfs
> sunrpc 164669 5 nfs,lockd,nfs_acl,auth_rpcgss
> parport_pc 18855 0
> parport 27954 1 parport_pc
> ac 2192 0
> joydev 8475 0
> i2c_piix4 8328 0
> psmouse 49777 0
> button 4682 0
> evdev 7368 0
> processor 29999 0
> pcspkr 1699 0
> serio_raw 3768 0
> i2c_core 15712 1 i2c_piix4
> ext3 106470 3
> jbd 37053 1 ext3
> mbcache 5050 1 ext3
> usbhid 33308 0
> hid 63273 1 usbhid
> dm_mod 53786 9
> sd_mod 29857 3
> crc_t10dif 1276 1 sd_mod
> ahci 32374 2
> ohci_hcd 19228 0
> libata 133568 1 ahci
> thermal 11754 0
> virtio_net 10513 0
> ehci_hcd 31167 0
> thermal_sys 11942 2 processor,thermal
> scsi_mod 122181 2 sd_mod,libata
> virtio_pci 5535 0
> virtio_ring 3210 1 virtio_pci
> virtio 3309 2 virtio_net,virtio_pci
> usbcore 122194 4 usbhid,ohci_hcd,ehci_hcd
> nls_base 6377 1 usbcore
>
> ** PCI devices:
> 00:00.0 Host bridge [0600]: Intel Corporation 440FX - 82441FX PMC [Natoma] [8086:1237] (rev 02)
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>
> 00:01.0 ISA bridge [0601]: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] [8086:7000]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
>
> 00:02.0 VGA compatible controller [0300]: InnoTek Systemberatung GmbH VirtualBox Graphics Adapter [80ee:beef] (prog-if 00 [VGA controller])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 11
> Region 0: Memory at e0000000 (32-bit, prefetchable) [size=16M]
> Expansion ROM at <unassigned> [disabled]
>
> 00:03.0 Ethernet controller [0200]: Red Hat, Inc Virtio network device [1af4:1000]
> Subsystem: Red Hat, Inc Device [1af4:0001]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 19
> Region 0: I/O ports at d000 [size=32]
> Capabilities: [80] #00 [0000]
> Kernel driver in use: virtio-pci
>
> 00:04.0 System peripheral [0880]: InnoTek Systemberatung GmbH VirtualBox Guest Service [80ee:cafe]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 9
> Region 0: I/O ports at d020 [size=32]
> Region 1: Memory at f0000000 (32-bit, non-prefetchable) [size=4M]
> Region 2: Memory at f0400000 (32-bit, prefetchable) [size=16K]
>
> 00:06.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo/Intrepid USB [106b:003f] (prog-if 10 [OHCI])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64
> Interrupt: pin A routed to IRQ 22
> Region 0: Memory at f0404000 (32-bit, non-prefetchable) [size=4K]
> Kernel driver in use: ohci_hcd
>
> 00:07.0 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 08)
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 9
>
> 00:0d.0 SATA controller [0106]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller [8086:2829] (rev 02) (prog-if 01 [AHCI 1.0])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64
> Interrupt: pin A routed to IRQ 21
> Region 0: I/O ports at d040 [size=8]
> Region 1: I/O ports at <ignored>
> Region 2: I/O ports at d050 [size=8]
> Region 3: I/O ports at <ignored>
> Region 4: I/O ports at d060 [size=16]
> Region 5: Memory at f0406000 (32-bit, non-prefetchable) [size=8K]
> Capabilities: [70] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: ahci
>
>
> ** Sound cards:
>
> -- System Information:
> Debian Release: 6.0
> APT prefers stable
> APT policy: (500, 'stable')
> Architecture: amd64 (x86_64)
>
> Kernel: Linux 2.6.32-5-openvz-amd64 (SMP w/1 CPU core)
> Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8)
> Shell: /bin/sh linked to /bin/bash
>
> Versions of packages linux-image-2.6.32-5-openvz-amd64 depends on:
> ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
> ii initramfs-tools [linux-init 0.98.8 tools for generating an initramfs
> ii linux-base 2.6.32-31 Linux image base package
> ii module-init-tools 3.12-1 tools for managing Linux kernel mo
> hi vzctl 3.0.24-1pve4 OpenVZ - server virtualization sol
>
> Versions of packages linux-image-2.6.32-5-openvz-amd64 recommends:
> pn firmware-linux-free <none> (no description available)
>
> Versions of packages linux-image-2.6.32-5-openvz-amd64 suggests:
> ii grub 0.97-64 GRand Unified Bootloader (dummy pa
> pn linux-doc-2.6.32 <none> (no description available)
>
> Versions of packages linux-image-2.6.32-5-openvz-amd64 is related to:
> pn firmware-bnx2 <none> (no description available)
> pn firmware-bnx2x <none> (no description available)
> pn firmware-ipw2x00 <none> (no description available)
> pn firmware-ivtv <none> (no description available)
> pn firmware-iwlwifi <none> (no description available)
> pn firmware-linux <none> (no description available)
> pn firmware-linux-nonfree <none> (no description available)
> pn firmware-qlogic <none> (no description available)
> pn firmware-ralink <none> (no description available)
> pn xen-hypervisor <none> (no description available)
>
> -- debconf information excluded
>
>
>
>
> --
> To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
> Archive: [🔎] 20110211134456.1765.80895.reportbug@vmmox.sprint-service.ru">http://lists.debian.org/[🔎] 20110211134456.1765.80895.reportbug@vmmox.sprint-service.ru
>
Reply to: