Bug#609784:
Thanks for considering this bug. I have been using this driver and
seems to be working fine so far (sending this email using it).
$ sudo lspci -s 07:00.0 -nnv
07:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd.
RTL8191SEvB Wireless LAN Controller [10ec:8172] (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. Device [10ec:8181]
Flags: bus master, fast devsel, latency 0, IRQ 17
I/O ports at 2000 [size=256]
Memory at d1100000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Legacy Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Capabilities: [160] Device Serial Number 00-00-00-00-00-00-00-00
Kernel driver in use: rtl819xSE
and dmesg output:
[ 2028.969908] rtllib_crypt: registered algorithm 'NULL'
[ 2028.969911] rtllib_crypt: registered algorithm 'TKIP'
[ 2028.969912] rtllib_crypt: registered algorithm 'CCMP'
[ 2028.969913] rtllib_crypt: registered algorithm 'WEP'
[ 2028.969914]
[ 2028.969915] Linux kernel driver for RTL8192 based WLAN cards
[ 2028.969916] Copyright (c) 2007-2008, Realsil Wlan Driver
[ 2028.969957] rtl819xSE 0000:07:00.0: PCI INT A -> GSI 17 (level,
low) -> IRQ 17
[ 2028.969963] rtl819xSE 0000:07:00.0: setting latency timer to 64
[ 2028.970100] Memory mapped space start: 0xd1100000
[ 2028.976097] GetPciBusInfo(): Find Device(10EC:8172) bus=7 dev=0, func=0
[ 2028.977088] GetPciBridegInfo : Find Device(8086:3B44) bus=0 dev=28, func=1
[ 2028.977089] Pci Bridge Vendor is found index: 0
[ 2028.977090] Pci Bridge Vendor is 8086
[ 2028.982411] =========>dm_InitRateAdaptiveMask: bUseRAMask=0
[ 2029.065603] rtl819xSE 0000:07:00.0: firmware: requesting
RTL8192SE/rtl8192sfw.bin
[ 2029.213505] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 2029.213512] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 2029.213516] HW_VAR_MRC: Turn on 1T1R MRC!
[ 2029.214753] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2029.432219] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 2029.432226] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 2029.432230] HW_VAR_MRC: Turn on 1T1R MRC!
[ 2049.903684] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 2049.903691] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 2049.903695] HW_VAR_MRC: Turn on 1T1R MRC!
[ 2079.890248] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 2079.890255] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 2079.890260] HW_VAR_MRC: Turn on 1T1R MRC!
[ 2119.960961] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 2119.960965] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 2119.960967] HW_VAR_MRC: Turn on 1T1R MRC!
[ 2173.776027] lo: Disabled Privacy Extensions
[ 2231.078758] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 2231.078762] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 2231.078763] HW_VAR_MRC: Turn on 1T1R MRC!
[ 2232.536122] Linking with thenetworkwifi,channel:6, qos:0, myHT:1,
networkHT:0, mode:6 cur_net.flags:0x406
[ 2232.536143] rtllib_associate_procedure_wq(), chan:6
[ 2232.536148] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[ 2232.546108] ==============>rtllib_associate_procedure_wq():ieee->current_network.qos_data.qos_mode
is 0,ieee->qos_capability is 1
--
Mathieu
Reply to: