--- Begin Message ---
Package: linux-2.6
Version: 2.6.32-30
Severity: important
Tags: upstream
After upgrade to squeeze I can't wake up the PC anymore with USB
dongle (remote control) and probably the same thing applies to UPS
backup. It's nVidia ION based motherboard.
/proc/acpi/wakeup is properly configured:
USB0 S4 enabled pci:0000:00:04.0
I can confirm that it works properly when I revert back to this package:
linux-image-2.6.32-5-686_2.6.32-18_i386.deb
Regards,
Adam
-- Package-specific info:
** Version:
Linux version 2.6.32-5-686 (Debian 2.6.32-30) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Jan 12 04:01:41 UTC 2011
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=dbf6fadb-e76b-4d90-a5a7-496552cd5d8d ro quiet splash
** Tainted: P (1)
* Proprietary module has been loaded.
** Kernel log:
[ 114.108659] ehci_hcd 0000:00:06.1: PCI INT B -> Link[UB12] -> GSI 22 (level, low) -> IRQ 22
[ 114.108707] ehci_hcd 0000:00:06.1: setting latency timer to 64
[ 114.108717] ehci_hcd 0000:00:06.1: EHCI Host Controller
[ 114.108749] ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2
[ 114.108805] ehci_hcd 0000:00:06.1: debug port 1
[ 114.108822] ehci_hcd 0000:00:06.1: cache line size of 32 is not supported
[ 114.108853] ehci_hcd 0000:00:06.1: irq 22, io mem 0xf9f7e800
[ 114.120051] ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00
[ 114.120119] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 114.120129] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 114.120139] usb usb2: Product: EHCI Host Controller
[ 114.120146] usb usb2: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 114.120153] usb usb2: SerialNumber: 0000:00:06.1
[ 114.120399] usb usb2: configuration #1 chosen from 1 choice
[ 114.120507] hub 2-0:1.0: USB hub found
[ 114.120536] hub 2-0:1.0: 6 ports detected
[ 114.139873] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 114.139951] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
[ 114.139995] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 114.140043] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 114.140256] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3
[ 114.140314] ohci_hcd 0000:00:04.0: irq 23, io mem 0xf9f7f000
[ 114.198085] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 114.198098] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 114.198107] usb usb3: Product: OHCI Host Controller
[ 114.198114] usb usb3: Manufacturer: Linux 2.6.32-5-686 ohci_hcd
[ 114.198122] usb usb3: SerialNumber: 0000:00:04.0
[ 114.198602] usb usb3: configuration #1 chosen from 1 choice
[ 114.198832] hub 3-0:1.0: USB hub found
[ 114.198862] hub 3-0:1.0: 6 ports detected
[ 114.199047] ohci_hcd 0000:00:06.0: PCI INT A -> Link[UB11] -> GSI 21 (level, low) -> IRQ 21
[ 114.199093] ohci_hcd 0000:00:06.0: setting latency timer to 64
[ 114.199102] ohci_hcd 0000:00:06.0: OHCI Host Controller
[ 114.199132] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4
[ 114.199171] ohci_hcd 0000:00:06.0: irq 21, io mem 0xf9f7d000
[ 114.254065] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 114.254074] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 114.254081] usb usb4: Product: OHCI Host Controller
[ 114.254086] usb usb4: Manufacturer: Linux 2.6.32-5-686 ohci_hcd
[ 114.254091] usb usb4: SerialNumber: 0000:00:06.0
[ 114.254304] usb usb4: configuration #1 chosen from 1 choice
[ 114.254404] hub 4-0:1.0: USB hub found
[ 114.254434] hub 4-0:1.0: 6 ports detected
[ 114.269685] uhci_hcd: USB Universal Host Controller Interface driver
[ 114.784078] usb 3-2: new low speed USB device using ohci_hcd and address 2
[ 115.007075] usb 3-2: New USB device found, idVendor=0471, idProduct=206c
[ 115.007084] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 115.007091] usb 3-2: Product: MCE USB IR Receiver- Spinel plusf0r ASUS
[ 115.007096] usb 3-2: Manufacturer: PHILIPS
[ 115.007290] usb 3-2: configuration #1 chosen from 1 choice
[ 115.029315] input: PHILIPS MCE USB IR Receiver- Spinel plusf0r ASUS as /devices/pci0000:00/0000:00:04.0/usb3/3-2/3-2:1.0/input/input6
[ 115.029664] philips_asus 0003:0471:206C.0003: input: USB HID v1.00 Keyboard [PHILIPS MCE USB IR Receiver- Spinel plusf0r ASUS] on usb-0000:00:04.0-2/input0
[ 115.332034] usb 3-6: new full speed USB device using ohci_hcd and address 3
[ 115.535087] usb 3-6: New USB device found, idVendor=0cf3, idProduct=3002
[ 115.535094] usb 3-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 115.535284] usb 3-6: configuration #1 chosen from 1 choice
[ 115.896035] usb 4-2: new low speed USB device using ohci_hcd and address 2
[ 116.146786] usb 4-2: New USB device found, idVendor=051d, idProduct=0002
[ 116.146793] usb 4-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 116.146800] usb 4-2: Product: Back-UPS ES 550G FW:870.O1 .I USB FW:O1
[ 116.146805] usb 4-2: Manufacturer: APC
[ 116.146810] usb 4-2: SerialNumber: 3B1006X53565
[ 116.147009] usb 4-2: configuration #1 chosen from 1 choice
[ 116.467075] generic-usb 0003:051D:0002.0004: hiddev0,hidraw0: USB HID v1.10 Device [APC Back-UPS ES 550G FW:870.O1 .I USB FW:O1 ] on usb-0000:00:06.0-2/input0
[ 117.124915] CPU0 attaching NULL sched-domain.
[ 117.124927] CPU1 attaching NULL sched-domain.
[ 117.124934] CPU2 attaching NULL sched-domain.
[ 117.124939] CPU3 attaching NULL sched-domain.
[ 117.149116] CPU0 attaching sched-domain:
[ 117.149124] domain 0: span 0,2 level SIBLING
[ 117.149131] groups: 0 (cpu_power = 589) 2 (cpu_power = 589)
[ 117.149144] domain 1: span 0,2 level MC
[ 117.149149] groups: 0,2 (cpu_power = 1178)
[ 117.149159] domain 2: span 0-3 level CPU
[ 117.149164] groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
[ 117.149178] CPU1 attaching sched-domain:
[ 117.149183] domain 0: span 1,3 level SIBLING
[ 117.149189] groups: 1 (cpu_power = 589) 3 (cpu_power = 589)
[ 117.149200] domain 1: span 1,3 level MC
[ 117.149206] groups: 1,3 (cpu_power = 1178)
[ 117.149215] domain 2: span 0-3 level CPU
[ 117.149220] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
[ 117.149233] CPU2 attaching sched-domain:
[ 117.149239] domain 0: span 0,2 level SIBLING
[ 117.149244] groups: 2 (cpu_power = 589) 0 (cpu_power = 589)
[ 117.149256] domain 1: span 0,2 level MC
[ 117.149261] groups: 0,2 (cpu_power = 1178)
[ 117.149270] domain 2: span 0-3 level CPU
[ 117.149275] groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
[ 117.149288] CPU3 attaching sched-domain:
[ 117.149293] domain 0: span 1,3 level SIBLING
[ 117.149299] groups: 3 (cpu_power = 589) 1 (cpu_power = 589)
[ 117.149310] domain 1: span 1,3 level MC
[ 117.149315] groups: 1,3 (cpu_power = 1178)
[ 117.149325] domain 2: span 0-3 level CPU
[ 117.149330] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
[ 117.458713] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 117.747775] r8169: eth0: link up
[ 118.044426] r8169: eth0: link up
[ 128.548025] eth0: no IPv6 routers present
** Model information
not available
** Loaded modules:
Module Size Used by
uhci_hcd 16057 0
ohci_hcd 16880 0
ehci_hcd 27851 0
sco 5857 2
bridge 33019 0
stp 996 1 bridge
bnep 7444 2
rfcomm 25171 8
l2cap 21705 16 bnep,rfcomm
tun 8772 2
fuse 44033 1
usbhid 28008 2
hid_philips_asus 1976 0
hid 50893 2 usbhid,hid_philips_asus
snd_hda_codec_nvhdmi 2567 1
snd_hda_codec_realtek 163294 1
snd_hda_intel 16811 0
snd_hda_codec 46002 3 snd_hda_codec_nvhdmi,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 4054 1 snd_hda_codec
arc4 974 2
snd_pcm 47226 2 snd_hda_intel,snd_hda_codec
ecb 1405 2
snd_seq 35463 0
snd_timer 12258 2 snd_pcm,snd_seq
snd_seq_device 3673 1 snd_seq
snd 34375 8 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
ath9k 238393 0
mac80211 123574 1 ath9k
ath 6014 1 ath9k
btusb 8077 2
soundcore 3450 1 snd
cfg80211 87661 3 ath9k,mac80211,ath
shpchp 21220 0
asus_atk0110 6770 0
wmi 3575 0
bluetooth 36319 9 sco,bnep,rfcomm,l2cap,btusb
rfkill 10264 3 cfg80211,bluetooth
snd_page_alloc 5045 2 snd_hda_intel,snd_pcm
pcspkr 1207 0
led_class 1757 1 ath9k
evdev 5609 8
pci_hotplug 18065 1 shpchp
button 3598 0
processor 26327 1
i2c_nforce2 4464 0
i2c_core 12696 1 i2c_nforce2
ext4 257803 1
mbcache 3762 1 ext4
jbd2 56155 1 ext4
crc16 1027 2 l2cap,ext4
sd_mod 25977 3
crc_t10dif 1012 1 sd_mod
ahci 27270 2
libata 115753 1 ahci
r8169 25180 0
scsi_mod 101429 2 sd_mod,libata
mii 2714 1 r8169
usbcore 98453 8 uhci_hcd,ohci_hcd,ehci_hcd,usbhid,btusb
nls_base 4541 1 usbcore
thermal 9206 0
thermal_sys 9378 2 processor,thermal
** PCI devices:
00:00.0 Host bridge [0600]: nVidia Corporation MCP79 Host Bridge [10de:0a82] (rev b1)
Subsystem: ASUSTeK Computer Inc. Device [1043:83e2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.1 RAM memory [0500]: nVidia Corporation MCP79 Memory Controller [10de:0a88] (rev b1)
Subsystem: ASUSTeK Computer Inc. Device [1043:83e2]
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:03.0 ISA bridge [0601]: nVidia Corporation MCP79 LPC Bridge [10de:0aad] (rev b3)
Subsystem: ASUSTeK Computer Inc. Device [1043:83e2]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: I/O ports at 4f00 [size=256]
00:03.1 RAM memory [0500]: nVidia Corporation MCP79 Memory Controller [10de:0aa4] (rev b1)
Subsystem: ASUSTeK Computer Inc. Device [1043:83e2]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:03.2 SMBus [0c05]: nVidia Corporation MCP79 SMBus [10de:0aa2] (rev b1)
Subsystem: ASUSTeK Computer Inc. Device [1043:83e2]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 14
Region 0: I/O ports at 4900 [size=64]
Region 4: I/O ports at 4d00 [size=64]
Region 5: I/O ports at 4e00 [size=64]
Capabilities: <access denied>
Kernel driver in use: nForce2_smbus
00:03.3 RAM memory [0500]: nVidia Corporation MCP79 Memory Controller [10de:0a89] (rev b1)
Subsystem: ASUSTeK Computer Inc. Device [1043:83e2]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:03.5 Co-processor [0b40]: nVidia Corporation MCP79 Co-processor [10de:0aa3] (rev b1)
Subsystem: ASUSTeK Computer Inc. Device [1043:83e2]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 23
Region 0: Memory at f9f80000 (32-bit, non-prefetchable) [size=512K]
00:04.0 USB Controller [0c03]: nVidia Corporation MCP79 OHCI USB 1.1 Controller [10de:0aa5] (rev b1) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:83e2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f9f7f000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
00:04.1 USB Controller [0c03]: nVidia Corporation MCP79 EHCI USB 2.0 Controller [10de:0aa6] (rev b1) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:83e2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 20
Region 0: Memory at f9f7ec00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:06.0 USB Controller [0c03]: nVidia Corporation MCP79 OHCI USB 1.1 Controller [10de:0aa7] (rev b1) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:83e2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 21
Region 0: Memory at f9f7d000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
00:06.1 USB Controller [0c03]: nVidia Corporation MCP79 EHCI USB 2.0 Controller [10de:0aa9] (rev b1) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:83e2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 22
Region 0: Memory at f9f7e800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:08.0 Audio device [0403]: nVidia Corporation MCP79 High Definition Audio [10de:0ac0] (rev b1)
Subsystem: ASUSTeK Computer Inc. Device [1043:8427]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin A routed to IRQ 21
Region 0: Memory at f9f78000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:09.0 PCI bridge [0604]: nVidia Corporation MCP79 PCI Bridge [10de:0aab] (rev b1) (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:0b.0 SATA controller [0106]: nVidia Corporation MCP79 AHCI Controller [10de:0ab8] (rev b1) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:83e2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 28
Region 0: I/O ports at c080 [size=8]
Region 1: I/O ports at c000 [size=4]
Region 2: I/O ports at bc00 [size=8]
Region 3: I/O ports at b880 [size=4]
Region 4: I/O ports at b800 [size=16]
Region 5: Memory at f9f76000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:0c.0 PCI bridge [0604]: nVidia Corporation MCP79 PCI Express Bridge [10de:0ac4] (rev b1) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:10.0 PCI bridge [0604]: nVidia Corporation MCP79 PCI Express Bridge [10de:0aa0] (rev b1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fa000000-fbdfffff
Prefetchable memory behind bridge: 00000000e0000000-00000000f7ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:15.0 PCI bridge [0604]: nVidia Corporation MCP79 PCI Express Bridge [10de:0ac6] (rev b1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fbe00000-fbefffff
Prefetchable memory behind bridge: 00000000f8f00000-00000000f8ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:16.0 PCI bridge [0604]: nVidia Corporation MCP79 PCI Express Bridge [10de:0ac7] (rev b1) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Memory behind bridge: fbf00000-fbffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
03:00.0 VGA compatible controller [0300]: nVidia Corporation ION VGA [10de:087d] (rev b1) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:83e2]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f6000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at dc00 [size=128]
Expansion ROM at fbde0000 [disabled] [size=128K]
Capabilities: <access denied>
04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)
Subsystem: ASUSTeK Computer Inc. M4A785TD Motherboard [1043:83a3]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 27
Region 0: I/O ports at e800 [size=256]
Region 2: Memory at f8fff000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at f8ff8000 (64-bit, prefetchable) [size=16K]
Expansion ROM at fbef0000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: r8169
05:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)
Subsystem: AzureWave Device [1a3b:1089]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fbff0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
** USB devices:
Bus 004 Device 002: ID 051d:0002 American Power Conversion Uninterruptible Power Supply
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 0cf3:3002 Atheros Communications, Inc.
Bus 003 Device 002: ID 0471:206c Philips (or NXP)
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 6.0
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-686 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-686 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 2.6.32-30 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-686 recommends:
ii firmware-linux-free 2.6.32-30 Binary firmware for various driver
ii libc6-i686 2.11.2-10 Embedded GNU C Library: Shared lib
Versions of packages linux-image-2.6.32-5-686 suggests:
ii grub 0.97-64 GRand Unified Bootloader (dummy pa
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
ii firmware-linux-nonfree 0.28 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information excluded
--- End Message ---