Re: Bug#612300: linux-image-2.6.32-5-686: USB devices can't wakeup the system
On Mon, 07 Feb 2011 15:24:06 +0100
Adam Sloboda <ja@disorder.sk> wrote:
bisogna attivarla sui tre pc
> Package: linux-2.6
> Version: 2.6.32-30
> Severity: important
> Tags: upstream
>
>
> After upgrade to squeeze I can't wake up the PC anymore with USB
> dongle (remote control) and probably the same thing applies to UPS
> backup. It's nVidia ION based motherboard.
>
> /proc/acpi/wakeup is properly configured:
> USB0 S4 enabled pci:0000:00:04.0
>
> I can confirm that it works properly when I revert back to this
> package: linux-image-2.6.32-5-686_2.6.32-18_i386.deb
>
> Regards,
> Adam
>
>
> -- Package-specific info:
> ** Version:
> Linux version 2.6.32-5-686 (Debian 2.6.32-30) (ben@decadent.org.uk)
> (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Jan 12 04:01:41 UTC
> 2011
>
> ** Command line:
> BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686
> root=UUID=dbf6fadb-e76b-4d90-a5a7-496552cd5d8d ro quiet splash
>
> ** Tainted: P (1)
> * Proprietary module has been loaded.
>
> ** Kernel log:
> [ 114.108659] ehci_hcd 0000:00:06.1: PCI INT B -> Link[UB12] -> GSI
> 22 (level, low) -> IRQ 22 [ 114.108707] ehci_hcd 0000:00:06.1:
> setting latency timer to 64 [ 114.108717] ehci_hcd 0000:00:06.1:
> EHCI Host Controller [ 114.108749] ehci_hcd 0000:00:06.1: new USB
> bus registered, assigned bus number 2 [ 114.108805] ehci_hcd
> 0000:00:06.1: debug port 1 [ 114.108822] ehci_hcd 0000:00:06.1:
> cache line size of 32 is not supported [ 114.108853] ehci_hcd
> 0000:00:06.1: irq 22, io mem 0xf9f7e800 [ 114.120051] ehci_hcd
> 0000:00:06.1: USB 2.0 started, EHCI 1.00 [ 114.120119] usb usb2: New
> USB device found, idVendor=1d6b, idProduct=0002 [ 114.120129] usb
> usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 114.120139] usb usb2: Product: EHCI Host Controller [ 114.120146]
> usb usb2: Manufacturer: Linux 2.6.32-5-686 ehci_hcd [ 114.120153]
> usb usb2: SerialNumber: 0000:00:06.1 [ 114.120399] usb usb2:
> configuration #1 chosen from 1 choice [ 114.120507] hub 2-0:1.0: USB
> hub found [ 114.120536] hub 2-0:1.0: 6 ports detected
> [ 114.139873] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> [ 114.139951] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUB0] -> GSI
> 23 (level, low) -> IRQ 23 [ 114.139995] ohci_hcd 0000:00:04.0:
> setting latency timer to 64 [ 114.140043] ohci_hcd 0000:00:04.0:
> OHCI Host Controller [ 114.140256] ohci_hcd 0000:00:04.0: new USB
> bus registered, assigned bus number 3 [ 114.140314] ohci_hcd
> 0000:00:04.0: irq 23, io mem 0xf9f7f000 [ 114.198085] usb usb3: New
> USB device found, idVendor=1d6b, idProduct=0001 [ 114.198098] usb
> usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 114.198107] usb usb3: Product: OHCI Host Controller [ 114.198114]
> usb usb3: Manufacturer: Linux 2.6.32-5-686 ohci_hcd [ 114.198122]
> usb usb3: SerialNumber: 0000:00:04.0 [ 114.198602] usb usb3:
> configuration #1 chosen from 1 choice [ 114.198832] hub 3-0:1.0: USB
> hub found [ 114.198862] hub 3-0:1.0: 6 ports detected
> [ 114.199047] ohci_hcd 0000:00:06.0: PCI INT A -> Link[UB11] -> GSI
> 21 (level, low) -> IRQ 21 [ 114.199093] ohci_hcd 0000:00:06.0:
> setting latency timer to 64 [ 114.199102] ohci_hcd 0000:00:06.0:
> OHCI Host Controller [ 114.199132] ohci_hcd 0000:00:06.0: new USB
> bus registered, assigned bus number 4 [ 114.199171] ohci_hcd
> 0000:00:06.0: irq 21, io mem 0xf9f7d000 [ 114.254065] usb usb4: New
> USB device found, idVendor=1d6b, idProduct=0001 [ 114.254074] usb
> usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 114.254081] usb usb4: Product: OHCI Host Controller [ 114.254086]
> usb usb4: Manufacturer: Linux 2.6.32-5-686 ohci_hcd [ 114.254091]
> usb usb4: SerialNumber: 0000:00:06.0 [ 114.254304] usb usb4:
> configuration #1 chosen from 1 choice [ 114.254404] hub 4-0:1.0: USB
> hub found [ 114.254434] hub 4-0:1.0: 6 ports detected
> [ 114.269685] uhci_hcd: USB Universal Host Controller Interface
> driver [ 114.784078] usb 3-2: new low speed USB device using
> ohci_hcd and address 2 [ 115.007075] usb 3-2: New USB device found,
> idVendor=0471, idProduct=206c [ 115.007084] usb 3-2: New USB device
> strings: Mfr=1, Product=2, SerialNumber=0 [ 115.007091] usb 3-2:
> Product: MCE USB IR Receiver- Spinel plusf0r ASUS [ 115.007096] usb
> 3-2: Manufacturer: PHILIPS [ 115.007290] usb 3-2: configuration #1
> chosen from 1 choice [ 115.029315] input: PHILIPS MCE USB IR
> Receiver- Spinel plusf0r ASUS
> as /devices/pci0000:00/0000:00:04.0/usb3/3-2/3-2:1.0/input/input6
> [ 115.029664] philips_asus 0003:0471:206C.0003: input: USB HID v1.00
> Keyboard [PHILIPS MCE USB IR Receiver- Spinel plusf0r ASUS] on
> usb-0000:00:04.0-2/input0 [ 115.332034] usb 3-6: new full speed USB
> device using ohci_hcd and address 3 [ 115.535087] usb 3-6: New USB
> device found, idVendor=0cf3, idProduct=3002 [ 115.535094] usb 3-6:
> New USB device strings: Mfr=0, Product=0, SerialNumber=0
> [ 115.535284] usb 3-6: configuration #1 chosen from 1 choice
> [ 115.896035] usb 4-2: new low speed USB device using ohci_hcd and
> address 2 [ 116.146786] usb 4-2: New USB device found,
> idVendor=051d, idProduct=0002 [ 116.146793] usb 4-2: New USB device
> strings: Mfr=3, Product=1, SerialNumber=2 [ 116.146800] usb 4-2:
> Product: Back-UPS ES 550G FW:870.O1 .I USB FW:O1 [ 116.146805] usb
> 4-2: Manufacturer: APC [ 116.146810] usb 4-2: SerialNumber:
> 3B1006X53565 [ 116.147009] usb 4-2: configuration #1 chosen from 1
> choice [ 116.467075] generic-usb 0003:051D:0002.0004:
> hiddev0,hidraw0: USB HID v1.10 Device [APC Back-UPS ES 550G
> FW:870.O1 .I USB FW:O1 ] on usb-0000:00:06.0-2/input0 [ 117.124915]
> CPU0 attaching NULL sched-domain. [ 117.124927] CPU1 attaching NULL
> sched-domain. [ 117.124934] CPU2 attaching NULL sched-domain.
> [ 117.124939] CPU3 attaching NULL sched-domain. [ 117.149116] CPU0
> attaching sched-domain: [ 117.149124] domain 0: span 0,2 level
> SIBLING [ 117.149131] groups: 0 (cpu_power = 589) 2 (cpu_power =
> 589) [ 117.149144] domain 1: span 0,2 level MC [ 117.149149]
> groups: 0,2 (cpu_power = 1178) [ 117.149159] domain 2: span 0-3
> level CPU [ 117.149164] groups: 0,2 (cpu_power = 1178) 1,3
> (cpu_power = 1178) [ 117.149178] CPU1 attaching sched-domain:
> [ 117.149183] domain 0: span 1,3 level SIBLING [ 117.149189]
> groups: 1 (cpu_power = 589) 3 (cpu_power = 589) [ 117.149200]
> domain 1: span 1,3 level MC [ 117.149206] groups: 1,3 (cpu_power
> = 1178) [ 117.149215] domain 2: span 0-3 level CPU
> [ 117.149220] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power =
> 1178) [ 117.149233] CPU2 attaching sched-domain: [ 117.149239]
> domain 0: span 0,2 level SIBLING [ 117.149244] groups: 2
> (cpu_power = 589) 0 (cpu_power = 589) [ 117.149256] domain 1: span
> 0,2 level MC [ 117.149261] groups: 0,2 (cpu_power = 1178)
> [ 117.149270] domain 2: span 0-3 level CPU [ 117.149275]
> groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178) [ 117.149288]
> CPU3 attaching sched-domain: [ 117.149293] domain 0: span 1,3 level
> SIBLING [ 117.149299] groups: 3 (cpu_power = 589) 1 (cpu_power =
> 589) [ 117.149310] domain 1: span 1,3 level MC
> [ 117.149315] groups: 1,3 (cpu_power = 1178)
> [ 117.149325] domain 2: span 0-3 level CPU
> [ 117.149330] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power =
> 1178) [ 117.458713] ADDRCONF(NETDEV_UP): wlan0: link is not ready
> [ 117.747775] r8169: eth0: link up
> [ 118.044426] r8169: eth0: link up
> [ 128.548025] eth0: no IPv6 routers present
>
> ** Model information
> not available
>
> ** Loaded modules:
> Module Size Used by
> uhci_hcd 16057 0
> ohci_hcd 16880 0
> ehci_hcd 27851 0
> sco 5857 2
> bridge 33019 0
> stp 996 1 bridge
> bnep 7444 2
> rfcomm 25171 8
> l2cap 21705 16 bnep,rfcomm
> tun 8772 2
> fuse 44033 1
> usbhid 28008 2
> hid_philips_asus 1976 0
> hid 50893 2 usbhid,hid_philips_asus
> snd_hda_codec_nvhdmi 2567 1
> snd_hda_codec_realtek 163294 1
> snd_hda_intel 16811 0
> snd_hda_codec 46002 3
> snd_hda_codec_nvhdmi,snd_hda_codec_realtek,snd_hda_intel
> snd_hwdep 4054 1 snd_hda_codec
> arc4 974 2 snd_pcm 47226 2
> snd_hda_intel,snd_hda_codec ecb 1405 2
> snd_seq 35463 0
> snd_timer 12258 2 snd_pcm,snd_seq
> snd_seq_device 3673 1 snd_seq
> snd 34375 8
> snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
> ath9k 238393 0 mac80211 123574 1 ath9k
> ath 6014 1 ath9k
> btusb 8077 2
> soundcore 3450 1 snd
> cfg80211 87661 3 ath9k,mac80211,ath
> shpchp 21220 0
> asus_atk0110 6770 0
> wmi 3575 0
> bluetooth 36319 9 sco,bnep,rfcomm,l2cap,btusb
> rfkill 10264 3 cfg80211,bluetooth
> snd_page_alloc 5045 2 snd_hda_intel,snd_pcm
> pcspkr 1207 0
> led_class 1757 1 ath9k
> evdev 5609 8
> pci_hotplug 18065 1 shpchp
> button 3598 0
> processor 26327 1
> i2c_nforce2 4464 0
> i2c_core 12696 1 i2c_nforce2
> ext4 257803 1
> mbcache 3762 1 ext4
> jbd2 56155 1 ext4
> crc16 1027 2 l2cap,ext4
> sd_mod 25977 3
> crc_t10dif 1012 1 sd_mod
> ahci 27270 2
> libata 115753 1 ahci
> r8169 25180 0
> scsi_mod 101429 2 sd_mod,libata
> mii 2714 1 r8169
> usbcore 98453 8
> uhci_hcd,ohci_hcd,ehci_hcd,usbhid,btusb nls_base 4541
> 1 usbcore thermal 9206 0
> thermal_sys 9378 2 processor,thermal
>
> ** PCI devices:
> 00:00.0 Host bridge [0600]: nVidia Corporation MCP79 Host Bridge
> [10de:0a82] (rev b1) Subsystem: ASUSTeK Computer Inc. Device
> [1043:83e2] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV-
> VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap-
> 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort-
> >SERR- <PERR- INTx- Latency: 0
>
> 00:00.1 RAM memory [0500]: nVidia Corporation MCP79 Memory Controller
> [10de:0a88] (rev b1) Subsystem: ASUSTeK Computer Inc. Device
> [1043:83e2] Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV-
> VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap-
> 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort-
> >SERR- <PERR- INTx- Latency: 0
>
> 00:03.0 ISA bridge [0601]: nVidia Corporation MCP79 LPC Bridge
> [10de:0aad] (rev b3) Subsystem: ASUSTeK Computer Inc. Device
> [1043:83e2] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV-
> VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap-
> 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort-
> >SERR- <PERR- INTx- Latency: 0 Region 0: I/O ports at 4f00 [size=256]
>
> 00:03.1 RAM memory [0500]: nVidia Corporation MCP79 Memory Controller
> [10de:0aa4] (rev b1) Subsystem: ASUSTeK Computer Inc. Device
> [1043:83e2] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV-
> VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap-
> 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort-
> >SERR- <PERR- INTx-
>
> 00:03.2 SMBus [0c05]: nVidia Corporation MCP79 SMBus [10de:0aa2] (rev
> b1) Subsystem: ASUSTeK Computer Inc. Device [1043:83e2]
> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF-
> FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> INTx- Interrupt: pin A routed to IRQ 14 Region 0: I/O ports at 4900
> [size=64] Region 4: I/O ports at 4d00 [size=64]
> Region 5: I/O ports at 4e00 [size=64]
> Capabilities: <access denied>
> Kernel driver in use: nForce2_smbus
>
> 00:03.3 RAM memory [0500]: nVidia Corporation MCP79 Memory Controller
> [10de:0a89] (rev b1) Subsystem: ASUSTeK Computer Inc. Device
> [1043:83e2] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV-
> VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap-
> 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort-
> >SERR- <PERR- INTx-
>
> 00:03.5 Co-processor [0b40]: nVidia Corporation MCP79 Co-processor
> [10de:0aa3] (rev b1) Subsystem: ASUSTeK Computer Inc. Device
> [1043:83e2] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV-
> VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap-
> 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort-
> >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 23 Region 0:
> >Memory at f9f80000 (32-bit, non-prefetchable) [size=512K]
>
> 00:04.0 USB Controller [0c03]: nVidia Corporation MCP79 OHCI USB 1.1
> Controller [10de:0aa5] (rev b1) (prog-if 10 [OHCI]) Subsystem:
> ASUSTeK Computer Inc. Device [1043:83e2] Control: I/O+ Mem+
> BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR-
> FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr-
> DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0
> (750ns min, 250ns max) Interrupt: pin A routed to IRQ 23 Region 0:
> Memory at f9f7f000 (32-bit, non-prefetchable) [size=4K] Capabilities:
> <access denied> Kernel driver in use: ohci_hcd
>
> 00:04.1 USB Controller [0c03]: nVidia Corporation MCP79 EHCI USB 2.0
> Controller [10de:0aa6] (rev b1) (prog-if 20 [EHCI]) Subsystem:
> ASUSTeK Computer Inc. Device [1043:83e2] Control: I/O- Mem+
> BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR-
> FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr-
> DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0
> (750ns min, 250ns max) Interrupt: pin B routed to IRQ 20 Region 0:
> Memory at f9f7ec00 (32-bit, non-prefetchable) [size=256]
> Capabilities: <access denied> Kernel driver in use: ehci_hcd
>
> 00:06.0 USB Controller [0c03]: nVidia Corporation MCP79 OHCI USB 1.1
> Controller [10de:0aa7] (rev b1) (prog-if 10 [OHCI]) Subsystem:
> ASUSTeK Computer Inc. Device [1043:83e2] Control: I/O+ Mem+
> BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR-
> FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr-
> DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0
> (750ns min, 250ns max) Interrupt: pin A routed to IRQ 21 Region 0:
> Memory at f9f7d000 (32-bit, non-prefetchable) [size=4K] Capabilities:
> <access denied> Kernel driver in use: ohci_hcd
>
> 00:06.1 USB Controller [0c03]: nVidia Corporation MCP79 EHCI USB 2.0
> Controller [10de:0aa9] (rev b1) (prog-if 20 [EHCI]) Subsystem:
> ASUSTeK Computer Inc. Device [1043:83e2] Control: I/O- Mem+
> BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR-
> FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr-
> DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0
> (750ns min, 250ns max) Interrupt: pin B routed to IRQ 22 Region 0:
> Memory at f9f7e800 (32-bit, non-prefetchable) [size=256]
> Capabilities: <access denied> Kernel driver in use: ehci_hcd
>
> 00:08.0 Audio device [0403]: nVidia Corporation MCP79 High Definition
> Audio [10de:0ac0] (rev b1) Subsystem: ASUSTeK Computer Inc. Device
> [1043:8427] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV-
> VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+
> 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort-
> >SERR- <PERR- INTx- Latency: 0 (500ns min, 1250ns max) Interrupt: pin
> >A routed to IRQ 21
> Region 0: Memory at f9f78000 (32-bit, non-prefetchable)
> [size=16K] Capabilities: <access denied>
> Kernel driver in use: HDA Intel
>
> 00:09.0 PCI bridge [0604]: nVidia Corporation MCP79 PCI Bridge
> [10de:0aab] (rev b1) (prog-if 01 [Subtractive decode]) Control: I/O-
> Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR-
> FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr-
> DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA-
> MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr+ DiscTmrStat-
> DiscTmrSERREn- Capabilities: <access denied>
>
> 00:0b.0 SATA controller [0106]: nVidia Corporation MCP79 AHCI
> Controller [10de:0ab8] (rev b1) (prog-if 01 [AHCI 1.0]) Subsystem:
> ASUSTeK Computer Inc. Device [1043:83e2] Control: I/O+ Mem+
> BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR-
> FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr-
> DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0
> (750ns min, 250ns max) Interrupt: pin A routed to IRQ 28 Region 0:
> I/O ports at c080 [size=8] Region 1: I/O ports at c000 [size=4]
> Region 2: I/O ports at bc00 [size=8]
> Region 3: I/O ports at b880 [size=4]
> Region 4: I/O ports at b800 [size=16]
> Region 5: Memory at f9f76000 (32-bit, non-prefetchable)
> [size=8K] Capabilities: <access denied>
> Kernel driver in use: ahci
>
> 00:0c.0 PCI bridge [0604]: nVidia Corporation MCP79 PCI Express
> Bridge [10de:0ac4] (rev b1) (prog-if 00 [Normal decode]) Control:
> I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
> SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr-
> DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency:
> 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02,
> subordinate=02, sec-latency=0 Secondary status: 66MHz- FastB2B-
> ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities:
> <access denied> Kernel driver in use: pcieport
>
> 00:10.0 PCI bridge [0604]: nVidia Corporation MCP79 PCI Express
> Bridge [10de:0aa0] (rev b1) (prog-if 00 [Normal decode]) Control:
> I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
> SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr-
> DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency:
> 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03,
> subordinate=03, sec-latency=0 I/O behind bridge: 0000d000-0000dfff
> Memory behind bridge: fa000000-fbdfffff Prefetchable memory behind
> bridge: 00000000e0000000-00000000f7ffffff Secondary status: 66MHz-
> FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities:
> <access denied>
>
> 00:15.0 PCI bridge [0604]: nVidia Corporation MCP79 PCI Express
> Bridge [10de:0ac6] (rev b1) (prog-if 00 [Normal decode]) Control:
> I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
> SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr-
> DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency:
> 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=04,
> subordinate=04, sec-latency=0 I/O behind bridge: 0000e000-0000efff
> Memory behind bridge: fbe00000-fbefffff Prefetchable memory behind
> bridge: 00000000f8f00000-00000000f8ffffff Secondary status: 66MHz-
> FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities:
> <access denied> Kernel driver in use: pcieport
>
> 00:16.0 PCI bridge [0604]: nVidia Corporation MCP79 PCI Express
> Bridge [10de:0ac7] (rev b1) (prog-if 00 [Normal decode]) Control:
> I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
> SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr-
> DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency:
> 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=05,
> subordinate=05, sec-latency=0 Memory behind bridge: fbf00000-fbffffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA-
> MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat-
> DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use:
> pcieport
>
> 03:00.0 VGA compatible controller [0300]: nVidia Corporation ION VGA
> [10de:087d] (rev b1) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK
> Computer Inc. Device [1043:83e2] Control: I/O+ Mem+ BusMaster-
> SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A
> >routed to IRQ 22 Region 0: Memory at fa000000 (32-bit,
> >non-prefetchable) [size=16M]
> Region 1: Memory at e0000000 (64-bit, prefetchable)
> [size=256M] Region 3: Memory at f6000000 (64-bit, prefetchable)
> [size=32M] Region 5: I/O ports at dc00 [size=128]
> Expansion ROM at fbde0000 [disabled] [size=128K]
> Capabilities: <access denied>
>
> 04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
> RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168]
> (rev 03) Subsystem: ASUSTeK Computer Inc. M4A785TD Motherboard
> [1043:83a3] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
> VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+
> 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort-
> >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt:
> >pin A routed to IRQ 27 Region 0: I/O ports at e800 [size=256]
> Region 2: Memory at f8fff000 (64-bit, prefetchable) [size=4K]
> Region 4: Memory at f8ff8000 (64-bit, prefetchable) [size=16K]
> Expansion ROM at fbef0000 [disabled] [size=64K]
> Capabilities: <access denied>
> Kernel driver in use: r8169
>
> 05:00.0 Network controller [0280]: Atheros Communications Inc. AR9285
> Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)
> Subsystem: AzureWave Device [1a3b:1089] Control: I/O+ Mem+ BusMaster+
> SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line
> >Size: 64 bytes Interrupt: pin A routed to IRQ 18
> Region 0: Memory at fbff0000 (64-bit, non-prefetchable)
> [size=64K] Capabilities: <access denied>
> Kernel driver in use: ath9k
>
>
> ** USB devices:
> Bus 004 Device 002: ID 051d:0002 American Power Conversion
> Uninterruptible Power Supply Bus 004 Device 001: ID 1d6b:0001 Linux
> Foundation 1.1 root hub Bus 003 Device 003: ID 0cf3:3002 Atheros
> Communications, Inc. Bus 003 Device 002: ID 0471:206c Philips (or
> NXP) Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>
>
> -- System Information:
> Debian Release: 6.0
> APT prefers stable
> APT policy: (500, 'stable')
> Architecture: i386 (i686)
>
> Kernel: Linux 2.6.32-5-686 (SMP w/4 CPU cores)
> Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
> Shell: /bin/sh linked to /bin/dash
>
> Versions of packages linux-image-2.6.32-5-686 depends on:
> ii debconf [debconf-2.0] 1.5.36.1 Debian configuration
> management sy ii initramfs-tools [linux-initra 0.98.8 tools for
> generating an initramfs ii linux-base 2.6.32-30
> Linux image base package ii module-init-tools 3.12-1
> tools for managing Linux kernel mo
>
> Versions of packages linux-image-2.6.32-5-686 recommends:
> ii firmware-linux-free 2.6.32-30 Binary firmware for
> various driver ii libc6-i686 2.11.2-10 Embedded
> GNU C Library: Shared lib
>
> Versions of packages linux-image-2.6.32-5-686 suggests:
> ii grub 0.97-64 GRand Unified Bootloader
> (dummy pa pn linux-doc-2.6.32 <none> (no
> description available)
>
> Versions of packages linux-image-2.6.32-5-686 is related to:
> pn firmware-bnx2 <none> (no description
> available) pn firmware-bnx2x <none> (no
> description available) pn firmware-ipw2x00 <none>
> (no description available) pn firmware-ivtv
> <none> (no description available) pn
> firmware-iwlwifi <none> (no description available)
> pn firmware-linux <none> (no description
> available) ii firmware-linux-nonfree 0.28 Binary
> firmware for various driver pn firmware-qlogic
> <none> (no description available) pn
> firmware-ralink <none> (no description available)
> pn xen-hypervisor <none> (no description
> available)
>
> -- debconf information excluded
>
>
>
--
Marco Giardina
EDP -- Responsabile
Capital Life -
http://www.capitallife.it
tel. +39 030/9157301 fax +39 030/9157303
marco.giardina@capitallife.it
skype: marco_giardina
Reply to: