Package: linux-2.6
Version: 2.6.32-30
Severity: normal
*** Please type your report below this line ***
Hi,
The Asus WL-167g USB wifi dongle doesn't work with 2.6.32, it never
gets an address when DHCP is used. A static configuration does
however work.
Others[0] have apparently had the same problem but, I didn't find a bug
report. According to this Ubuntu bug[1], this is a problem that has been
resolved in 2.6.36 (I have confirmed this both on .36 and .37) but no
word of a specific fix. There's also a very similar bug for Fedora[2],
but concerning rt2500pci.
When I have a little more time, I will try a bisect between .35 and
.36 and see if I can track down what fixed this. Any pointers in the
right direction is welcome.
0. http://lists.debian.org/debian-user/2010/02/msg01959.html
1. https://bugs.launchpad.net/ubuntu/+source/linux/+bug/468072
2. https://bugzilla.redhat.com/show_bug.cgi?id=457441
-- Package-specific info:
** Version:
Linux version 2.6.32-5-686 (Debian 2.6.32-30) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Jan 12 04:01:41 UTC 2011
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=1e2f54c2-b7b9-48bb-8af6-743dc5179c9e ro quiet
** Not tainted
** Kernel log:
[ 5.877933] [drm] register mmio size: 65536
[ 5.878963] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
[ 5.878996] agpgart-via 0000:00:00.0: AGP 3.5 bridge
[ 5.879016] agpgart-via 0000:00:00.0: bridge is in legacy mode, falling back to 2.x
[ 5.879024] agpgart-via 0000:00:00.0: putting AGP V2 device into 4x mode
[ 5.879083] radeon 0000:01:00.0: putting AGP V2 device into 4x mode
[ 5.879088] [drm] radeon: VRAM 128M
[ 5.879091] [drm] radeon: VRAM from 0x00000000 to 0x07FFFFFF
[ 5.879094] [drm] radeon: GTT 128M
[ 5.879096] [drm] radeon: GTT from 0xE0000000 to 0xE7FFFFFF
[ 5.879158] [drm] radeon: irq initialized.
[ 5.879251] [drm] Detected VRAM RAM=128M, BAR=256M
[ 5.879258] [drm] RAM width 128bits DDR
[ 5.879571] [TTM] Zone kernel: Available graphics memory: 256808 kiB.
[ 5.879607] [drm] radeon: 128M of VRAM memory ready
[ 5.879610] [drm] radeon: 128M of GTT memory ready.
[ 5.879867] [drm] radeon: cp idle (0x02000603)
[ 5.879928] [drm] Loading R200 Microcode
[ 5.880763] platform radeon_cp.0: firmware: requesting radeon/R200_cp.bin
[ 6.201889] [drm] radeon: ring at 0x00000000E0000000
[ 6.201912] [drm] ring test succeeded in 0 usecs
[ 6.225439] [drm] radeon: ib pool ready.
[ 6.225550] [drm] ib test succeeded in 0 usecs
[ 6.228448] [drm] DFP table revision: 3
[ 6.229299] [drm] Radeon Display Connectors
[ 6.229304] [drm] Connector 0:
[ 6.229307] [drm] VGA
[ 6.229310] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 6.229313] [drm] Encoders:
[ 6.229316] [drm] CRT1: INTERNAL_DAC1
[ 6.229318] [drm] Connector 1:
[ 6.229320] [drm] DVI-D
[ 6.229322] [drm] HPD1
[ 6.229325] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 6.229345] [drm] Encoders:
[ 6.229348] [drm] DFP1: INTERNAL_TMDS1
[ 6.289683] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[ 6.375769] [drm] fb mappable at 0xD0040000
[ 6.375773] [drm] vram apper at 0xD0000000
[ 6.375775] [drm] size 3145728
[ 6.375778] [drm] fb depth is 24
[ 6.375780] [drm] pitch is 4096
[ 6.448069] Console: switching to colour frame buffer device 128x48
[ 6.464400] fb0: radeondrmfb frame buffer device
[ 6.464404] registered panic notifier
[ 6.464415] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
[ 7.319934] cfg80211: Using static regulatory domain info
[ 7.319938] cfg80211: Regulatory domain: US
[ 7.319941] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 7.319946] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 7.319949] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 7.319953] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 7.319957] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 7.319961] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 7.319964] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 7.320777] cfg80211: Calling CRDA for country: US
[ 7.835137] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[ 7.835155] VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22
[ 7.835326] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[ 7.918149] phy0: Selected rate control algorithm 'minstrel'
[ 7.919251] Registered led device: rt2500usb-phy0::radio
[ 7.919277] Registered led device: rt2500usb-phy0::quality
[ 7.920236] usbcore: registered new interface driver rt2500usb
[ 9.736149] Adding 746980k swap on /dev/sda5. Priority:-1 extents:1 across:746980k
[ 9.978175] EXT3 FS on sda1, internal journal
[ 10.144870] loop: module loaded
[ 12.061792] fuse init (API version 7.13)
[ 15.710030] eth0: setting half-duplex.
[ 15.710185] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.881260] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 15.886790] eth1: link down
[ 15.886909] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 17.901413] Bluetooth: Core ver 2.15
[ 17.901535] NET: Registered protocol family 31
[ 17.901538] Bluetooth: HCI device and connection manager initialized
[ 17.901544] Bluetooth: HCI socket layer initialized
[ 17.944946] Bluetooth: L2CAP ver 2.14
[ 17.944953] Bluetooth: L2CAP socket layer initialized
[ 18.146926] Bluetooth: RFCOMM TTY layer initialized
[ 18.146936] Bluetooth: RFCOMM socket layer initialized
[ 18.146939] Bluetooth: RFCOMM ver 1.11
[ 18.286456] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.286463] Bluetooth: BNEP filters: protocol multicast
[ 18.655701] Bridge firewalling registered
[ 19.037775] Bluetooth: SCO (Voice Link) ver 0.6
[ 19.037781] Bluetooth: SCO socket layer initialized
[ 19.861911] lp0: using parport0 (interrupt-driven).
[ 19.899086] ppdev: user-space parallel port driver
[ 111.148090] wlan0: direct probe to AP 00:1d:60:9d:a6:5a (try 1)
[ 111.150392] wlan0: direct probe responded
[ 111.150402] wlan0: authenticate with AP 00:1d:60:9d:a6:5a (try 1)
[ 111.348037] wlan0: authenticate with AP 00:1d:60:9d:a6:5a (try 2)
[ 111.349591] wlan0: authenticated
[ 111.349625] wlan0: associate with AP 00:1d:60:9d:a6:5a (try 1)
[ 111.351967] wlan0: RX AssocResp from 00:1d:60:9d:a6:5a (capab=0x411 status=0 aid=3)
[ 111.351972] wlan0: associated
[ 111.359565] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 111.424814] padlock: VIA PadLock not detected.
[ 121.468024] wlan0: no IPv6 routers present
[ 156.596649] wlan0: deauthenticating from 00:1d:60:9d:a6:5a by local choice (reason=3)
** Model information
not available
** Loaded modules:
Module Size Used by
aes_i586 6816 0
aes_generic 25738 1 aes_i586
cpufreq_stats 1940 0
cpufreq_conservative 4018 0
cpufreq_userspace 1480 0
cpufreq_powersave 602 0
ppdev 4058 0
lp 5570 0
sco 5857 2
bridge 33019 0
stp 996 1 bridge
bnep 7444 2
rfcomm 25171 0
l2cap 21705 6 bnep,rfcomm
crc16 1027 1 l2cap
bluetooth 36319 6 sco,bnep,rfcomm,l2cap
binfmt_misc 4907 1
fuse 44033 1
loop 9765 0
arc4 974 2
ecb 1405 2
snd_via82xx 15256 1
gameport 6061 1 snd_via82xx
snd_ac97_codec 79148 1 snd_via82xx
ac97_bus 710 1 snd_ac97_codec
snd_pcm 47226 2 snd_via82xx,snd_ac97_codec
snd_page_alloc 5045 2 snd_via82xx,snd_pcm
rt2500usb 14078 0
snd_mpu401_uart 4067 1 snd_via82xx
rt2x00usb 5713 1 rt2500usb
snd_seq_midi 3576 0
snd_seq_midi_event 3684 1 snd_seq_midi
rt2x00lib 19101 2 rt2500usb,rt2x00usb
led_class 1757 1 rt2x00lib
mac80211 123574 2 rt2x00usb,rt2x00lib
cfg80211 87661 2 rt2x00lib,mac80211
snd_rawmidi 12513 2 snd_mpu401_uart,snd_seq_midi
rfkill 10264 3 bluetooth,cfg80211
snd_seq 35463 2 snd_seq_midi,snd_seq_midi_event
snd_timer 12258 2 snd_pcm,snd_seq
snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq
snd 34375 10 snd_via82xx,snd_ac97_codec,snd_pcm,snd_mpu401_uart,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
radeon 511184 2
ttm 33386 1 radeon
drm_kms_helper 18309 1 radeon
drm 112088 4 radeon,ttm,drm_kms_helper
parport_pc 15799 1
i2c_viapro 4419 0
i2c_algo_bit 3497 1 radeon
i2c_core 12696 5 radeon,drm_kms_helper,drm,i2c_viapro,i2c_algo_bit
pcspkr 1207 0
evdev 5609 9
parport 22554 3 ppdev,lp,parport_pc
soundcore 3450 1 snd
psmouse 44657 0
processor 26327 1
button 3598 0
shpchp 21220 0
serio_raw 2916 0
pci_hotplug 18065 1 shpchp
ext3 94212 1
jbd 32169 1 ext3
mbcache 3762 1 ext3
sg 15968 0
sr_mod 10770 0
sd_mod 25977 3
crc_t10dif 1012 1 sd_mod
cdrom 26487 1 sr_mod
ata_generic 2067 0
fan 2586 0
pata_via 5701 2
thermal 9206 0
uhci_hcd 16057 0
3c59x 25036 0
sata_via 5608 0
via_rhine 14627 0
ehci_hcd 27851 0
thermal_sys 9378 3 processor,fan,thermal
libata 115753 3 ata_generic,pata_via,sata_via
floppy 40923 0
mii 2714 2 3c59x,via_rhine
usbcore 98453 5 rt2500usb,rt2x00usb,uhci_hcd,ehci_hcd
nls_base 4541 1 usbcore
scsi_mod 101429 4 sg,sr_mod,sd_mod,libata
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
#NetworkManager#iface eth0 inet dhcp
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
link/ether 00:50:8d:62:d5:98 brd ff:ff:ff:ff:ff:ff
3: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
link/ether 00:60:08:0f:1c:ec brd ff:ff:ff:ff:ff:ff
4: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN qlen 1000
link/ether 00:11:d8:be:13:cd brd ff:ff:ff:ff:ff:ff
inet6 fe80::211:d8ff:febe:13cd/64 scope link
valid_lft forever preferred_lft forever
5: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
link/ether 32:c4:e9:24:44:0d brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 1492 22 0 0 0 0 0 0 1492 22 0 0 0 0 0 0
eth1: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
wlan0: 724 5 0 0 0 0 0 0 5454 23 0 0 0 0 0 0
pan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
25 total packets received
0 forwarded
0 incoming packets discarded
22 incoming packets delivered
22 requests sent out
96 dropped because of missing route
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
1 active connections openings
1 passive connection openings
0 failed connection attempts
0 connection resets received
0 connections established
10 segments received
10 segments send out
0 segments retransmited
0 bad segments received.
0 resets sent
Udp:
12 packets received
0 packets to unknown port received.
0 packet receive errors
12 packets sent
UdpLite:
TcpExt:
1 TCP sockets finished time wait in fast timer
0 packet headers predicted
3 acknowledgments not containing data payload received
1 predicted acknowledgments
IpExt:
InOctets: 1846
OutOctets: 1492
*** Device features:
eth0: 0x0
eth1: 0x0
lo: 0x13865
pan0: 0xff3865
wlan0: 0x2000
** PCI devices:
00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge [1106:3189] (rev 80)
Subsystem: ABIT Computer Corp. Device [147b:1408]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 8
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
Capabilities: <access denied>
Kernel driver in use: agpgart-via
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237/VX700 PCI Bridge [1106:b198] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: e8000000-e80fffff
Prefetchable memory behind bridge: d0000000-dfffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:0b.0 Ethernet controller [0200]: 3Com Corporation 3c905 100BaseTX [Boomerang] [10b7:9050]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (750ns min, 2000ns max)
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at d200 [size=64]
[virtual] Expansion ROM at 20000000 [disabled] [size=64K]
Kernel driver in use: 3c59x
00:0f.0 RAID bus controller [0104]: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller [1106:3149] (rev 80)
Subsystem: ABIT Computer Corp. KV7 [147b:1408]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin B routed to IRQ 20
Region 0: I/O ports at de00 [size=8]
Region 1: I/O ports at e000 [size=4]
Region 2: I/O ports at cc00 [size=8]
Region 3: I/O ports at ce00 [size=4]
Region 4: I/O ports at d000 [size=16]
Region 5: I/O ports at c000 [size=256]
Capabilities: <access denied>
Kernel driver in use: sata_via
00:0f.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: ABIT Computer Corp. Device [147b:1408]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 20
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at d400 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_via
00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
Subsystem: ABIT Computer Corp. Device [147b:1408]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 21
Region 4: I/O ports at d600 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
Subsystem: ABIT Computer Corp. Device [147b:1408]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 21
Region 4: I/O ports at d800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
Subsystem: ABIT Computer Corp. Device [147b:1408]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at da00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:10.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
Subsystem: ABIT Computer Corp. Device [147b:1408]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at dc00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:10.4 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 86) (prog-if 20 [EHCI])
Subsystem: ABIT Computer Corp. Device [147b:1408]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 21
Region 0: Memory at e8111000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South] [1106:3227]
Subsystem: ABIT Computer Corp. Device [147b:1408]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:11.5 Multimedia audio controller [0401]: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller [1106:3059] (rev 60)
Subsystem: ABIT Computer Corp. Device [147b:1408]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 22
Region 0: I/O ports at c400 [size=256]
Capabilities: <access denied>
Kernel driver in use: VIA 82xx Audio
00:12.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102 [Rhine-II] [1106:3065] (rev 78)
Subsystem: ABIT Computer Corp. Device [147b:1408]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (750ns min, 2000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at c800 [size=256]
Region 1: Memory at e8110000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: via-rhine
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon R200 QM [Radeon 9100] [1002:514d] (prog-if 00 [VGA controller])
Subsystem: PC Partner Limited Device [174b:7149]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at b000 [size=256]
Region 2: Memory at e8020000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at e8000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
** USB devices:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0b05:1706 ASUSTek Computer, Inc. WL-167G v1 802.11g Adapter [Ralink RT2500USB]
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 6.0
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-686 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-686 depends on:
ii debconf [debconf-2.0] 1.5.36 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.7 tools for generating an initramfs
ii linux-base 2.6.32-30 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-686 recommends:
ii firmware-linux-free 2.6.32-30 Binary firmware for various driver
ii libc6-i686 2.11.2-9 Embedded GNU C Library: Shared lib
Versions of packages linux-image-2.6.32-5-686 suggests:
ii grub 0.97-64 GRand Unified Bootloader (dummy pa
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
ii firmware-linux-nonfree 0.28 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-686/prerm/removing-running-kernel-2.6.32-5-686: true
linux-image-2.6.32-5-686/postinst/depmod-error-initrd-2.6.32-5-686: false
linux-image-2.6.32-5-686/postinst/ignoring-do-bootloader-2.6.32-5-686:
* linux-image-2.6.32-5-686/postinst/missing-firmware-2.6.32-5-686:
Attachment:
signature.asc
Description: This is a digitally signed message part