Your message dated Mon, 24 Jan 2011 07:03:44 +1000 with message-id <1295816624.12300.1.camel@localhost> and subject line Re: Bug#610859: linux-image-2.6.32-bpo.5: Sound unusable on 1GHz Powerbook (TiBook) has caused the Debian Bug report #610859, regarding linux-image-2.6.32-bpo.5: Sound unusable on 1GHz Powerbook (TiBook) to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 610859: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=610859 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.32-bpo.5: Sound unusable on 1GHz Powerbook (TiBook)
- From: Anton Ivanov <arivanov@sigsegv.cx>
- Date: Sun, 23 Jan 2011 12:55:52 +0000
- Message-id: <[🔎] 20110123125552.11738.884.reportbug@atlantis.sigsegv.cx>
Package: linux-2.6 Version: 2.6.32-15~bpo50+1 Severity: normal File: linux-image-2.6.32-bpo.5 Sound module which is unusable. Any playback starts OK, but gets interrupted with hissing/ticking by other activity. Moving windows, disk activity, etc cause sound interruptions up to a couple of seconds in length. With "hands off" there is the occasional hiss-n-tick I have tried both the AOA and powermac sound modules. AOA does not detect the onboard sound card. Powermac detects it, but hisses/ticks. I am observing the same with 2.6.26 and with 2.6.32 from backports. -- Package-specific info: ** Version: Linux version 2.6.32-bpo.5-powerpc (Debian 2.6.32-15~bpo50+1) (norbert@tretkowski.de) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 Sat Jun 12 11:36:21 UTC 2010 ** Command line: root=/dev/hda4 ro ** Not tainted ** Kernel log: [ 119.408798] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 119.634006] eth1: Lucent/Agere firmware doesn't support manual roaming [ 119.705128] eth1: New link status: Connected (0001) [ 119.705685] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 128.768782] tun: Universal TUN/TAP device driver, 1.6 [ 128.768793] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 128.771214] tun0: Disabled Privacy Extensions [ 130.690459] eth1: no IPv6 routers present [ 192.420338] eth1: New link status: AP Out of Range (0004) [ 192.476681] irq: irq 1 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 30 [ 192.476723] irq: irq 2 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 31 [ 192.522927] eth1: New link status: AP In Range (0005) [ 192.577697] irq: irq 61 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 61 [ 192.991053] input: PowerMac Beep as /devices/pci0001:10/0001:10:17.0/input/input5 [ 309.309899] eth1: New link status: AP Out of Range (0004) [ 310.245024] eth1: New link status: AP In Range (0005) [ 453.575083] eth1: New link status: AP Out of Range (0004) [ 453.673571] eth1: New link status: AP In Range (0005) [ 463.199890] eth1: New link status: AP Out of Range (0004) [ 463.298378] eth1: New link status: AP In Range (0005) [ 914.766359] eth1: New link status: AP Out of Range (0004) [ 914.867941] eth1: New link status: AP In Range (0005) [ 1760.135494] input: PowerMac Beep as /devices/pci0001:10/0001:10:17.0/input/input6 [ 2101.517585] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 2101.811146] eth1: New link status: Connected (0001) [ 2101.811702] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 2107.495653] eth1: New link status: Disconnected (0002) [ 2108.696631] eth1: New link status: Connected (0001) [ 2112.075720] eth1: no IPv6 routers present [ 2112.875570] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2113.011062] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 2113.250253] eth1: Lucent/Agere firmware doesn't support manual roaming [ 2113.941866] eth1: New link status: Connected (0001) [ 2113.942576] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 2119.300944] eth1: New link status: Disconnected (0002) [ 2120.489911] eth1: New link status: Connected (0001) [ 2123.945793] eth1: no IPv6 routers present [ 2139.908804] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2140.086915] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 2140.347740] eth1: Lucent/Agere firmware doesn't support manual roaming [ 2140.589689] eth1: New link status: Connected (0001) [ 2140.590395] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 2146.189335] eth1: New link status: Disconnected (0002) [ 2147.406630] eth1: New link status: Connected (0001) [ 2151.312134] eth1: no IPv6 routers present [ 2304.962355] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 2305.191994] eth1: New link status: Connected (0001) [ 2305.192556] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 2310.687020] eth1: New link status: Disconnected (0002) [ 2312.007900] eth1: New link status: Connected (0001) [ 2315.490011] eth1: no IPv6 routers present [ 2316.217673] usb 2-1: new full speed USB device using ohci_hcd and address 2 [ 2316.426840] usb 2-1: New USB device found, idVendor=19d2, idProduct=0103 [ 2316.426856] usb 2-1: New USB device strings: Mfr=3, Product=2, SerialNumber=4 [ 2316.426866] usb 2-1: Product: ZTE WCDMA Technologies MSM [ 2316.426874] usb 2-1: Manufacturer: ZTE,Incorporated [ 2316.426882] usb 2-1: SerialNumber: P673A3H3GD010000 [ 2316.428864] usb 2-1: configuration #1 chosen from 1 choice [ 2317.081553] Initializing USB Mass Storage driver... [ 2317.084319] scsi0 : SCSI emulation for USB Mass Storage devices [ 2317.086268] usbcore: registered new interface driver usb-storage [ 2317.086278] USB Mass Storage support registered. [ 2317.093232] usb-storage: device found at 2 [ 2317.093239] usb-storage: waiting for device to settle before scanning [ 2318.651190] usb 2-1: USB disconnect, address 2 [ 2319.080219] usb 2-1: new full speed USB device using ohci_hcd and address 3 [ 2319.288884] usb 2-1: New USB device found, idVendor=19d2, idProduct=0031 [ 2319.288901] usb 2-1: New USB device strings: Mfr=3, Product=2, SerialNumber=4 [ 2319.288911] usb 2-1: Product: ZTE WCDMA Technologies MSM [ 2319.288919] usb 2-1: Manufacturer: ZTE,Incorporated [ 2319.288927] usb 2-1: SerialNumber: P673A3H3GD010000 [ 2319.290741] usb 2-1: configuration #1 chosen from 1 choice [ 2319.304228] scsi1 : SCSI emulation for USB Mass Storage devices [ 2319.308738] usb-storage: device found at 3 [ 2319.308749] usb-storage: waiting for device to settle before scanning [ 2320.229962] usbcore: registered new interface driver usbserial [ 2320.230965] USB Serial support registered for generic [ 2320.232204] usbcore: registered new interface driver usbserial_generic [ 2320.232214] usbserial: USB Serial Driver core [ 2320.307550] USB Serial support registered for GSM modem (1-port) [ 2320.309373] option 2-1:1.0: GSM modem (1-port) converter detected [ 2320.315602] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB0 [ 2320.315700] option 2-1:1.1: GSM modem (1-port) converter detected [ 2320.316925] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB1 [ 2320.317178] option 2-1:1.3: GSM modem (1-port) converter detected [ 2320.323223] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB2 [ 2320.323338] usbcore: registered new interface driver option [ 2320.323345] option: v0.7.2:USB Driver for GSM modems [ 2322.058583] PPP generic driver version 2.4.2 [ 2324.306480] usb-storage: device scan complete [ 2324.310490] scsi 1:0:0:0: CD-ROM HSPA USB SCSI CD-ROM 2.31 PQ: 0 ANSI: 2 [ 2324.314459] scsi 1:0:0:1: Direct-Access ZTE MMC Storage 2.31 PQ: 0 ANSI: 2 [ 2325.283274] sr0: scsi-1 drive [ 2325.283563] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2325.326476] sd 1:0:0:1: [sda] Attached SCSI removable disk [ 2325.928054] sr 1:0:0:0: Attached scsi generic sg0 type 5 [ 2325.929657] sd 1:0:0:1: Attached scsi generic sg1 type 0 [ 2335.158569] eth1: New link status: AP Out of Range (0004) [ 2370.505850] eth1: New link status: Disconnected (0002) [ 2374.612937] eth1: New link status: Connected (0001) ** Model information revision : 3.2 (pvr 8001 0302) platform : PowerMac model : PowerBook3,5 machine : PowerBook3,5 motherboard : PowerBook3,5 MacRISC2 MacRISC Power Macintosh ** Loaded modules: Module Size Used by ppp_async 11149 1 crc_ccitt 4487 1 ppp_async sg 24599 0 sd_mod 34307 0 crc_t10dif 4500 1 sd_mod sr_mod 17530 0 ppp_generic 25734 5 ppp_async slhc 7871 1 ppp_generic option 19267 1 usbserial 32062 3 option usb_storage 40294 0 snd_powermac 57683 1 snd_pcm_oss 42143 0 snd_mixer_oss 19030 1 snd_pcm_oss snd_pcm 65009 2 snd_powermac,snd_pcm_oss snd_seq_midi 8208 0 snd_rawmidi 21199 1 snd_seq_midi snd_seq_midi_event 7956 1 snd_seq_midi snd_seq 51369 2 snd_seq_midi,snd_seq_midi_event snd_timer 20908 2 snd_pcm,snd_seq snd_seq_device 8413 3 snd_seq_midi,snd_rawmidi,snd_seq snd 52651 10 snd_powermac,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 8003 1 snd snd_page_alloc 9061 1 snd_pcm tun 15360 2 radeon 690264 2 ttm 46812 1 radeon drm_kms_helper 24333 1 radeon drm 142443 5 radeon,ttm,drm_kms_helper xt_tcpudp 5511 1 nf_conntrack_ipv4 13409 1 nf_defrag_ipv4 4391 1 nf_conntrack_ipv4 xt_state 4551 1 iptable_filter 5502 1 ip_tables 13570 1 iptable_filter x_tables 14599 3 xt_tcpudp,xt_state,ip_tables nf_conntrack_ftp 8541 0 nf_conntrack 53009 3 nf_conntrack_ipv4,xt_state,nf_conntrack_ftp rfcomm 37810 2 l2cap 32868 9 rfcomm crc16 4475 1 l2cap bluetooth 52378 4 rfcomm,l2cap lp 10975 0 parport 32295 1 lp autofs4 25251 3 cpufreq_stats 5840 0 cpufreq_conservative 8952 0 cpufreq_userspace 5164 1 cpufreq_ondemand 10789 0 cpufreq_powersave 4138 0 nfsd 244076 13 exportfs 6650 1 nfsd nfs 269452 0 lockd 65459 2 nfsd,nfs fscache 36019 1 nfs nfs_acl 5635 2 nfsd,nfs auth_rpcgss 36672 2 nfsd,nfs sunrpc 173547 11 nfsd,nfs,lockd,nfs_acl,auth_rpcgss firewire_sbp2 16027 0 scsi_mod 126878 5 sg,sd_mod,sr_mod,usb_storage,firewire_sbp2 loop 15937 0 michael_mic 5246 4 airport 6597 0 orinoco 61239 1 airport cfg80211 117593 1 orinoco rfkill 18010 2 bluetooth,cfg80211 evdev 11760 9 yenta_socket 24451 0 rsrc_nonstatic 11368 1 yenta_socket pcmcia_core 30631 2 yenta_socket,rsrc_nonstatic ext3 124788 1 jbd 40879 1 ext3 mbcache 8286 1 ext3 ide_cd_mod 28561 0 cdrom 36699 2 sr_mod,ide_cd_mod ohci_hcd 35296 0 firewire_ohci 26008 0 firewire_core 44122 2 firewire_sbp2,firewire_ohci crc_itu_t 4495 1 firewire_core sungem 30897 0 sungem_phy 12982 1 sungem usbcore 131864 5 option,usbserial,usb_storage,ohci_hcd nls_base 8693 1 usbcore i2c_powermac 6651 0 ** PCI devices: 0000:00:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 1.5 AGP [106b:002d] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 16, Cache Line Size: 32 bytes Capabilities: <access denied> Kernel driver in use: agpgart-uninorth 0000:00:10.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon RV250 [Mobility FireGL 9000] [1002:4c66] (rev 01) (prog-if 00 [VGA controller]) Subsystem: ATI Technologies Inc Radeon RV250 [Mobility FireGL 9000] [1002:4c66] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 255 (2000ns min), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 48 Region 0: Memory at b8000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at 0400 [size=256] Region 2: Memory at b0000000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at b0020000 [size=128K] Capabilities: <access denied> Kernel driver in use: radeonfb Kernel modules: radeon 0001:10:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 1.5 PCI [106b:002e] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 16, Cache Line Size: 32 bytes 0001:10:17.0 Class [ff00]: Apple Computer Inc. KeyLargo Mac I/O [106b:0022] (rev 03) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 16, Cache Line Size: 32 bytes Region 0: Memory at 80000000 (32-bit, non-prefetchable) [size=512K] Kernel driver in use: macio 0001:10:18.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo USB [106b:0019] (prog-if 10 [OHCI]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 16 (750ns min, 21500ns max) Interrupt: pin A routed to IRQ 27 Region 0: Memory at a0002000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 0001:10:19.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo USB [106b:0019] (prog-if 10 [OHCI]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 16 (750ns min, 21500ns max) Interrupt: pin A routed to IRQ 28 Region 0: Memory at a0001000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 0001:10:1a.0 CardBus bridge [0607]: Texas Instruments PCI1410 PC card Cardbus Controller [104c:ac50] (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 58 Region 0: Memory at a0000000 (32-bit, non-prefetchable) [size=4K] Bus: primary=10, secondary=11, subordinate=14, sec-latency=176 Memory window 0: 84000000-87fff000 (prefetchable) Memory window 1: 88000000-8bfff000 I/O window 0: 00001000-000010ff I/O window 1: 00001100-000011ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus Kernel modules: yenta_socket 0002:24:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 1.5 Internal PCI [106b:002f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 16, Cache Line Size: 32 bytes 0002:24:0e.0 FireWire (IEEE 1394) [0c00]: Agere Systems FW323 [11c1:5811] (prog-if 10 [OHCI]) Subsystem: Agere Systems FW323 [11c1:5811] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 16 (3000ns min, 6000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 40 Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: firewire_ohci Kernel modules: firewire-ohci 0002:24:0f.0 Ethernet controller [0200]: Apple Computer Inc. UniNorth GMAC (Sun GEM) [106b:0021] (rev 01) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx- Latency: 16 (16000ns min, 16000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 41 Region 0: Memory at f5200000 (32-bit, non-prefetchable) [size=2M] Expansion ROM at f5100000 [disabled] [size=1M] Kernel driver in use: gem Kernel modules: sungem ** USB devices: Bus 002 Device 003: ID 19d2:0031 ONDA Communication S.p.A. ZTE MF636 Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: 5.0.6 APT prefers stable APT policy: (500, 'stable') Architecture: powerpc (ppc) Kernel: Linux 2.6.32-bpo.5-powerpc Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.32-bpo.5-powerpc depends on: ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy ii initramfs-tools [linux 0.92o tools for generating an initramfs ii libc6 2.7-18lenny6 GNU C Library: Shared libraries ii linux-base 2.6.32-15~bpo50+1 Linux image base package ii module-init-tools 3.4-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.32-bpo.5-powerpc recommends: ii firmware-linux-free 2.6.32-15~bpo50+1 Binary firmware for various driver Versions of packages linux-image-2.6.32-bpo.5-powerpc suggests: pn linux-doc-2.6.32 <none> (no description available) pn mkvmlinuz <none> (no description available) Versions of packages linux-image-2.6.32-bpo.5-powerpc is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) ii firmware-linux 0.24~bpo50+1 Binary firmware for various driver ii firmware-linux-nonfree 0.24~bpo50+1 Binary firmware for various driver pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information: shared/kernel-image/really-run-bootloader: true linux-image-2.6.32-bpo.5-powerpc/postinst/bootloader-error-2.6.32-bpo.5-powerpc: linux-image-2.6.32-bpo.5-powerpc/postinst/depmod-error-initrd-2.6.32-bpo.5-powerpc: false * linux-image-2.6.32-bpo.5-powerpc/postinst/missing-firmware-2.6.32-bpo.5-powerpc: linux-image-2.6.32-bpo.5-powerpc/prerm/removing-running-kernel-2.6.32-bpo.5-powerpc: true linux-image-2.6.32-bpo.5-powerpc/postinst/bootloader-test-error-2.6.32-bpo.5-powerpc: linux-image-2.6.32-bpo.5-powerpc/prerm/would-invalidate-boot-loader-2.6.32-bpo.5-powerpc: true
--- End Message ---
--- Begin Message ---
- To: 610859-done@bugs.debian.org
- Subject: Re: Bug#610859: linux-image-2.6.32-bpo.5: Sound unusable on 1GHz Powerbook (TiBook)
- From: Ben Hutchings <ben@decadent.org.uk>
- Date: Mon, 24 Jan 2011 07:03:44 +1000
- Message-id: <1295816624.12300.1.camel@localhost>
- In-reply-to: <[🔎] 4D3C672B.9090900@sigsegv.cx>
- References: <[🔎] 20110123125552.11738.884.reportbug@atlantis.sigsegv.cx> <[🔎] 1295790470.12300.0.camel@localhost> <[🔎] 4D3C672B.9090900@sigsegv.cx>
Version: 2.6.32-30 On Sun, 2011-01-23 at 17:36 +0000, Anton Ivanov wrote: > Ben Hutchings wrote: > > On Sun, 2011-01-23 at 12:55 +0000, Anton Ivanov wrote: > > > >> Package: linux-2.6 > >> Version: 2.6.32-15~bpo50+1 > >> > > > > Why are you using a 7 month old version? Try the current version > > (2.6.32-30). > > > > Ben. > > > > > The current one does not manifest the problem. You can close this bug. > > Apologies, I should have updated to latest first instead of looking at > the sources and wondering why the hell is it doing this :) OK, closing. Ben. -- Ben Hutchings Once a job is fouled up, anything done to improve it makes it worse.Attachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---