Bug#610812: linux-image-2.6.32-5-xen-amd64: kernel BUG at /build/buildd-linux-2.6_2.6.32-29-amd64-xcs37n/.../x86/xen/mmu.c:1649
Package: linux-2.6
Version: 2.6.32-30
Severity: important
Hello,
I have some issues when I use a little script for backup DomU with
lvcreate "snapshot" functionnality.
The script works "perfectly" with kernel 2.6.26 (from Lenny/Stable)
Similary issue report here:
http://xen.1045712.n5.nabble.com/kernel-BUG-at-arch-x86-xen-mmu-c-1860-td3318567.html#a3339844
Bye!
-- Package-specific info:
** Version:
Linux version 2.6.32-5-xen-amd64 (Debian 2.6.32-30) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Jan 12 05:46:49 UTC 2011
** Command line:
root=/dev/mapper/vgraid1-xen64 ro console=tty0 xencons=off
** Not tainted
** Kernel log:
[196102.732618] ------------[ cut here ]------------
[196102.733010] kernel BUG at /build/buildd-linux-2.6_2.6.32-29-amd64-xcs37n/linux-2.6-2.6.32/debian/build/source_amd64_xen/arch/x86/xen/mmu.c:1649!
[196102.733010] invalid opcode: 0000 [#1] SMP
[196102.733010] last sysfs file: /sys/devices/virtual/bdi/253:31/uevent
[196102.733010] CPU 1
[196102.733010] Modules linked in: dm_snapshot nfs lockd fscache nfs_acl auth_rpcgss sunrpc nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack xt_physdev iptable_filter ip_tables x_tables xen_evtchn xenfs bridge stp coretemp it87 hwmon_vid fuse loop i915 drm_kms_helper processor acpi_processor drm snd_pcsp usbhid i2c_algo_bit button video hid i2c_i801 snd_pcm i2c_core serio_raw snd_timer evdev output rng_core snd soundcore snd_page_alloc ext3 jbd mbcache dm_mod raid1 md_mod sg sr_mod cdrom sd_mod crc_t10dif ata_generic ata_piix libata ehci_hcd uhci_hcd scsi_mod usbcore nls_base r8169 mii thermal fan thermal_sys [last unloaded: scsi_wait_scan]
[196102.733010] Pid: 23144, comm: dmsetup_env Not tainted 2.6.32-5-xen-amd64 #1 945GM-S2
[196102.733010] RIP: e030:[<ffffffff8100c694>] [<ffffffff8100c694>] pin_pagetable_pfn+0x2d/0x36
[196102.733010] RSP: e02b:ffff880022c81e08 EFLAGS: 00010282
[196102.733010] RAX: 00000000ffffffea RBX: 000000000002dee2 RCX: 0000000000000001
[196102.733010] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff880022c81e08
[196102.733010] RBP: ffff8800284a3b80 R08: 0000000000000710 R09: ffffea0000a0c170
[196102.733010] R10: 0000000000007ff0 R11: ffff880000000968 R12: ffff8800286dd8a8
[196102.733010] R13: ffff880022c09228 R14: ffff88002f20b880 R15: ffff8800286dd8a8
[196102.733010] FS: 00007f07e332d700(0000) GS:ffff88000310c000(0000) knlGS:0000000000000000
[196102.733010] CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b
[196102.733010] CR2: 00007f07e2a0d876 CR3: 0000000022c05000 CR4: 0000000000002660
[196102.733010] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[196102.733010] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[196102.733010] Process dmsetup_env (pid: 23144, threadinfo ffff880022c80000, task ffff88002f20b880)
[196102.733010] Stack:
[196102.733010] 0000000000000000 000000000008f210 ffffea0000a0c170 000000000002dee2
[196102.733010] <0> ffff8800284a3b80 ffffffff810cd4a1 ffff880022c070f8 00007f07e2a0d876
[196102.733010] <0> 0000000022c07000 ffffffff810cb34c ffff880022c09228 00007f07e2a0d876
[196102.733010] Call Trace:
[196102.733010] [<ffffffff810cd4a1>] ? __pte_alloc+0x6b/0xc6
[196102.733010] [<ffffffff810cb34c>] ? pmd_alloc+0x28/0x5b
[196102.733010] [<ffffffff810cd5ca>] ? handle_mm_fault+0xce/0x80f
[196102.733010] [<ffffffff8130cc35>] ? page_fault+0x25/0x30
[196102.733010] [<ffffffff8130ce6a>] ? error_exit+0x2a/0x60
[196102.733010] [<ffffffff8101251d>] ? retint_restore_args+0x5/0x6
[196102.733010] [<ffffffff8130ed96>] ? do_page_fault+0x2e0/0x2fc
[196102.733010] [<ffffffff8130cc35>] ? page_fault+0x25/0x30
[196102.733010] Code: ec 28 89 3c 24 48 89 f7 e8 a2 fd ff ff 48 89 e7 48 89 44 24 08 be 01 00 00 00 31 d2 41 ba f0 7f 00 00 e8 b0 cc ff ff 85 c0 74 04 <0f> 0b eb fe 48 83 c4 28 c3 55 49 89 ca 48 89 d5 40 88 f1 48 89
[196102.733010] RIP [<ffffffff8100c694>] pin_pagetable_pfn+0x2d/0x36
[196102.733010] RSP <ffff880022c81e08>
[196102.733010] ---[ end trace a243e2d8d80fd0b9 ]---
** Model information
sys_vendor: Gigabyte Technology Co., Ltd.
product_name: 945GM-S2
product_version:
chassis_vendor: Gigabyte Technology Co., Ltd.
chassis_version:
bios_vendor: Award Software International, Inc.
bios_version: FC
board_vendor: Gigabyte Technology Co., Ltd.
board_name: 945GM-S2
board_version: x.x
** Loaded modules:
Module Size Used by
nfs 241066 1
lockd 57603 1 nfs
fscache 29834 1 nfs
nfs_acl 2031 1 nfs
auth_rpcgss 33476 1 nfs
sunrpc 161525 11 nfs,lockd,nfs_acl,auth_rpcgss
nf_conntrack_ipv4 9833 9
nf_defrag_ipv4 1139 1 nf_conntrack_ipv4
xt_state 1303 9
nf_conntrack 46519 2 nf_conntrack_ipv4,xt_state
xt_physdev 1508 18
iptable_filter 2258 1
ip_tables 13899 1 iptable_filter
x_tables 12845 3 xt_state,xt_physdev,ip_tables
xen_evtchn 4339 10
xenfs 9600 1
bridge 39662 0
stp 1440 1 bridge
coretemp 4325 0
it87 15879 0
hwmon_vid 1828 1 it87
fuse 50625 1
loop 11799 0
i915 255294 0
snd_pcsp 6579 0
drm_kms_helper 20065 1 i915
processor 35941 0
acpi_processor 5087 1 processor,[permanent]
usbhid 33276 0
snd_pcm 60551 1 snd_pcsp
drm 143361 2 i915,drm_kms_helper
hid 63225 1 usbhid
i2c_algo_bit 4225 1 i915
snd_timer 15582 1 snd_pcm
button 4650 1 i915
video 17445 1 i915
i2c_i801 7830 0
rng_core 3006 0
snd 46446 3 snd_pcsp,snd_pcm,snd_timer
soundcore 4598 1 snd
evdev 7352 0
serio_raw 3752 0
i2c_core 15712 5 i915,drm_kms_helper,drm,i2c_algo_bit,i2c_i801
snd_page_alloc 6249 1 snd_pcm
output 1692 1 video
ext3 106502 2
jbd 37085 1 ext3
mbcache 5050 1 ext3
dm_mod 53754 81
raid1 18431 2
md_mod 73808 3 raid1
fan 3346 0
sg 18760 0
sr_mod 12602 0
cdrom 29415 1 sr_mod
sd_mod 29873 9
crc_t10dif 1276 1 sd_mod
ata_generic 3047 0
ata_piix 21124 6
libata 133632 2 ata_generic,ata_piix
ehci_hcd 31151 0
r8169 29261 0
uhci_hcd 18521 0
thermal 11674 0
mii 3210 1 r8169
thermal_sys 11942 4 processor,video,fan,thermal
scsi_mod 122133 4 sg,sr_mod,sd_mod,libata
usbcore 122034 35 usbhid,ehci_hcd,uhci_hcd
nls_base 6377 1 usbcore
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub [8086:2770] (rev 02)
Subsystem: Giga-byte Technology Device [1458:5000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 82945G/GZ Integrated Graphics Controller [8086:2772] (rev 02) (prog-if 00 [VGA controller])
Subsystem: Giga-byte Technology Device [1458:d000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e4000000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at c000 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at e4080000 (32-bit, non-prefetchable) [size=256K]
Capabilities: <access denied>
Kernel modules: i915
00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00008000-00008fff
Memory behind bridge: 30000000-301fffff
Prefetchable memory behind bridge: 0000000030200000-00000000303fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: e0000000-e1ffffff
Prefetchable memory behind bridge: 0000000030400000-00000000305fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at b000 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at b400 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at b800 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at bc00 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Device [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at e40c0000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: e2000000-e3ffffff
Prefetchable memory behind bridge: 0000000030600000-00000000306fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01)
Subsystem: Giga-byte Technology Device [1458:5001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: intel-rng, iTCO_wdt
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Giga-byte Technology Device [1458:b001]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at f000 [size=16]
Kernel driver in use: ata_piix
Kernel modules: ata_piix, ata_generic
00:1f.2 IDE interface [0101]: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller [8086:27c0] (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Giga-byte Technology Device [1458:b002]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at d400 [size=8]
Region 1: I/O ports at d800 [size=4]
Region 2: I/O ports at dc00 [size=8]
Region 3: I/O ports at e000 [size=4]
Region 4: I/O ports at e400 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_piix, ata_generic
00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 01)
Subsystem: Giga-byte Technology GA-8I945PG-RH Mainboard [1458:5001]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 0500 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
Subsystem: Giga-byte Technology Device [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 751
Region 0: I/O ports at 9000 [size=256]
Region 2: Memory at e1000000 (64-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at 30400000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
03:00.0 Ethernet controller [0200]: D-Link System Inc DGE-528T Gigabit Ethernet Adapter [1186:4300] (rev 10)
Subsystem: D-Link System Inc DGE-528T Gigabit Ethernet Adapter [1186:4300]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at a000 [size=256]
Region 1: Memory at e3000000 (32-bit, non-prefetchable) [size=256]
[virtual] Expansion ROM at 30600000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
** USB devices:
Bus 004 Device 002: ID 0463:ffff MGE UPS Systems UPS
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 04fa:2490 Dallas Semiconductor DS1490F 2-in-1 Fob, 1-Wire adapter
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: 5.0.8
APT prefers stable
APT policy: (990, 'stable'), (200, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-xen-amd64 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.32-5-xen-amd64 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools 0.92o tools for generating an initramfs
ii linux-base 2.6.32-30 Linux image base package
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-xen-amd64 recommends:
ii firmware-linux-free 2.6.32-30 Binary firmware for various driver
Versions of packages linux-image-2.6.32-5-xen-amd64 suggests:
ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-xen-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
ii xen-hypervisor-4.0-amd64 [xen 4.0.1-1 The Xen Hypervisor on AMD64
-- debconf information:
linux-image-2.6.32-5-xen-amd64/postinst/ignoring-do-bootloader-2.6.32-5-xen-amd64:
linux-image-2.6.32-5-xen-amd64/prerm/removing-running-kernel-2.6.32-5-xen-amd64: true
linux-image-2.6.32-5-xen-amd64/postinst/depmod-error-initrd-2.6.32-5-xen-amd64: false
linux-image-2.6.32-5-xen-amd64/postinst/missing-firmware-2.6.32-5-xen-amd64:
Reply to: