Bug#610644: linux-image-2.6.32-5-amd64 oopses when using Matlab
Package: linux-2.6
Version: 2.6.32-30
Severity: important
Hi,
I have a problem with Linux oopsing when using Matlab. I was able to catch the
following log
[78661.407202] ------------[ cut here ]------------
[78661.407253] kernel BUG at
/build/buildd-linux-2.6_2.6.32-30-amd64-d4MbNM/linux-2.6-2.6.32/debian/build/source_amd64_none/mm/mmap.c:873!
[78661.407351] invalid opcode: 0000 [#1] SMP
[78661.407400] last sysfs file: /sys/devices/virtual/vtconsole/vtcon0/uevent
[78661.407453] CPU 0
[78661.407493] Modules linked in: cn acpi_cpufreq parport_pc ppdev
cpufreq_powersave lp cpufreq_conservative cpufreq_stats parport
cpufreq_userspace fuse joydev serio_raw evdev button processor nfs lockd fscache
nfs_acl auth_rpcgss sunrpc aufs(C) r8169 mii sg usbhid sd_mod hid sr_mod
crc_t10dif cdrom ata_generic ata_piix uhci_hcd libata ehci_hcd scsi_mod usbcore
nls_base igb dca thermal thermal_sys [last unloaded: scsi_wait_scan]
[78661.407912] Pid: 5628, comm: MATLAB Tainted: G C 2.6.32-5-amd64 #1
ProLiant DL160 G6
[78661.407998] RIP: 0010:[<ffffffff810d05be>] [<ffffffff810d05be>]
find_mergeable_anon_vma+0x10e/0x1d5
[78661.408089] RSP: 0018:ffff88007fb55a48 EFLAGS: 00010206
[78661.416044] RAX: ffff880060308bb0 RBX: ffff880060308b80 RCX: ffff880060308b80
[78661.416100] RDX: ffff8800602ecb80 RSI: 00007f028c9a5000 RDI: ffff88006017d420
[78661.416155] RBP: ffff88006017d368 R08: 000000000000000e R09: ffff8801bfc20080
[78661.416209] R10: ffff88007f86e9f0 R11: 00000001012afaca R12: ffff8800602ecb80
[78661.416264] R13: ffff88006017d420 R14: 0000000000000000 R15: ffff880060124320
[78661.416318] FS: 00007f02b2638710(0000) GS:ffff880006e00000(0000)
knlGS:0000000000000000
[78661.416402] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[78661.416452] CR2: 00007f028c9a5000 CR3: 00000000601bc000 CR4: 00000000000006f0
[78661.416506] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[78661.416560] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[78661.416616] Process MATLAB (pid: 5628, threadinfo ffff88007fb54000, task
ffff88007f86e9f0)
[78661.416699] Stack:
[78661.416736] ffffea0001503f00 0000000000000000 ffff88006017d420
0000000000000000
[78661.416798] <0> ffff8803fdbf4600 ffffffff810d5065 ffff88007f86e9f0
0000000000000000
[78661.416893] <0> ffff880060120d28 ffff88007fb55b88 ffff88006017d420
ffffffff810cc70b
[78661.417017] Call Trace:
[78661.417061] [<ffffffff810d5065>] ? anon_vma_prepare+0x2e/0xbd
[78661.417114] [<ffffffff810cc70b>] ? handle_mm_fault+0x260/0x80f
[78661.417168] [<ffffffff812fba61>] ? rwsem_down_read_failed+0x22/0x2b
[78661.417223] [<ffffffff810b3673>] ? file_read_actor+0x33/0x12a
[78661.417275] [<ffffffff812fe0b6>] ? do_page_fault+0x2e0/0x2fc
[78661.417326] [<ffffffff812fbf55>] ? page_fault+0x25/0x30
[78661.417376] [<ffffffff810b3673>] ? file_read_actor+0x33/0x12a
[78661.417440] [<ffffffffa01f2503>] ? nfs_writepages_callback+0x0/0x21 [nfs]
[78661.417496] [<ffffffff810b5438>] ? generic_file_aio_read+0x310/0x536
[78661.417551] [<ffffffff810ee809>] ? do_sync_read+0xce/0x113
[78661.417602] [<ffffffff81064d2a>] ? autoremove_wake_function+0x0/0x2e
[78661.417656] [<ffffffff812fb3df>] ? down_write+0x9/0x27
[78661.417711] [<ffffffffa0144029>] ? di_write_lock+0x1b/0x30 [aufs]
[78661.417767] [<ffffffffa0145bb9>] ? au_reval_and_lock_fdi+0xc9/0x563 [aufs]
[78661.417825] [<ffffffffa01459e7>] ? au_reopen_nondir+0x0/0x109 [aufs]
[78661.417879] [<ffffffff8103a47f>] ? activate_task+0x22/0x28
[78661.417930] [<ffffffff810ef252>] ? vfs_read+0xa6/0xff
[78661.417982] [<ffffffffa013e9bb>] ? vfsub_read_u+0xe/0x29 [aufs]
[78661.418036] [<ffffffffa014757d>] ? aufs_read+0x7e/0xe2 [aufs]
[78661.418088] [<ffffffff810ef252>] ? vfs_read+0xa6/0xff
[78661.418137] [<ffffffff81067eb2>] ? up_write+0x14/0x15
[78661.418187] [<ffffffff810ef367>] ? sys_read+0x45/0x6e
[78661.418236] [<ffffffff81010b42>] ? system_call_fastpath+0x16/0x1b
[78661.418287] Code: e8 48 85 d2 74 14 48 3b 72 10 72 0e 48 8b 40 08 48 89 cb 48
85 c0 75 d2 eb 03 48 89 cb 48 85 db 74 04 4c 8b 63 18 4d 39 ec 74 04 <0f> 0b eb
fe 48 85 db 74 7e 48 83 7b 78 00 4d 8b 6c 24 28 48 8b
[78661.418631] RIP [<ffffffff810d05be>] find_mergeable_anon_vma+0x10e/0x1d5
[78661.418687] RSP <ffff88007fb55a48>
[78661.419280] ---[ end trace 55f9afed3d8268b2 ]---
I hope that this can be useful.
regards,
E.
-- Package-specific info:
** Version:
Linux version 2.6.32-5-amd64 (Debian 2.6.32-30) (ben@decadent.org.uk) (gcc
version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Jan 12 03:40:32 UTC 2011
** Command line:
root=/dev/nfs initrd=initrd.img nfsroot=160.228.16.20:/srv/diskless/nfsroot
debug=100 ip=dhcp rw BOOT_IMAGE=vmlinuz
** Tainted: C (1024)
* Module from drivers/staging has been loaded.
** Kernel log:
[ 6.498242] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 6.498552] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 6.514246] ata2.00: configured for UDMA/133
[ 6.514250] ata1.00: configured for UDMA/133
[ 6.514330] scsi 0:0:0:0: Direct-Access ATA GB0250EAFYK HPG1
PQ: 0 ANSI: 5
[ 6.514643] scsi 1:0:0:0: Direct-Access ATA MB1000EAMZE HPG1
PQ: 0 ANSI: 5
[ 6.516775] scsi 2:0:0:0: CD-ROM MATSHITA DVD RAM UJ862A 1.10
PQ: 0 ANSI: 5
[ 6.520783] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232
GiB)
[ 6.520827] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00
TB/931 GiB)
[ 6.520876] sd 1:0:0:0: [sdb] Write Protect is off
[ 6.520878] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 6.520898] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 6.521031] sdb:
[ 6.521504] sd 0:0:0:0: [sda] Write Protect is off
[ 6.521690] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.521809] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 6.522068] sda:
[ 6.525860] usbcore: registered new interface driver hiddev
[ 6.528046] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda
tray
[ 6.528184] Uniform CD-ROM driver Revision: 3.20
[ 6.528339] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 6.528878] sdb1
[ 6.529174] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 6.530748] input: ServerEngines SE USB Device as
/devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1:1.0/input/input1
[ 6.530923] generic-usb 0003:0000:0000.0001: input,hidraw0: USB HID v1.11
Keyboard [ServerEngines SE USB Device] on usb-0000:00:1a.0-1/input0
[ 6.531216] sda1 sda2 sda3
[ 6.531690] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.533946] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.534084] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 6.534219] sr 2:0:0:0: Attached scsi generic sg2 type 5
[ 6.534889] input: ServerEngines SE USB Device as
/devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1:1.1/input/input2
[ 6.535091] generic-usb 0003:0000:0000.0002: input,hidraw1: USB HID v1.11
Mouse [ServerEngines SE USB Device] on usb-0000:00:1a.0-1/input1
[ 6.535266] usbcore: registered new interface driver usbhid
[ 6.535370] usbhid: v2.6:USB HID core driver
[ 6.693957] usb 5-2: new low speed USB device using uhci_hcd and address 2
[ 6.781972] aufs: module is from the staging directory, the quality is
unknown, you have been warned.
[ 6.784648] aufs 2-standalone.tree-32-20100125
[ 6.830037] RPC: Registered udp transport module.
[ 6.830138] RPC: Registered tcp transport module.
[ 6.830238] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 6.834416] Slow work thread pool: Starting up
[ 6.834550] Slow work thread pool: Ready
[ 6.834683] FS-Cache: Loaded
[ 6.842539] FS-Cache: Netfs 'nfs' registered for caching
[ 6.861837] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6.869186] usb 5-2: New USB device found, idVendor=10d5, idProduct=5b08
[ 6.869295] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.869404] usb 5-2: Product: KVM A1
[ 6.869501] usb 5-2: Manufacturer: No brand
[ 6.869652] usb 5-2: configuration #1 chosen from 1 choice
[ 6.874390] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 6.887304] input: No brand KVM A1 as
/devices/pci0000:00/0000:00:1d.1/usb5/5-2/5-2:1.0/input/input3
[ 6.887468] generic-usb 0003:10D5:5B08.0003: input,hidraw2: USB HID v1.10
Keyboard [No brand KVM A1] on usb-0000:00:1d.1-2/input0
[ 6.910321] input: No brand KVM A1 as
/devices/pci0000:00/0000:00:1d.1/usb5/5-2/5-2:1.1/input/input4
[ 6.910496] generic-usb 0003:10D5:5B08.0004: input,hidraw3: USB HID v1.10
Mouse [No brand KVM A1] on usb-0000:00:1d.1-2/input1
[ 8.782386] igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 8.783791] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 19.145708] eth0: no IPv6 routers present
[ 20.082509] aufs test_add:248:exe[518]: uid/gid/perm /root 0/0/0755,
0/0/01777
[ 20.561147] udev[564]: starting version 164
[ 20.651432] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[ 20.651581] ACPI: Power Button [PWRB]
[ 20.651761] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 20.651900] ACPI: Power Button [PWRF]
[ 20.654393] ACPI: SSDT 00000000bf77e0c0 00487 (v01 DpgPmm P001Ist 00000011
INTL 20051117)
[ 20.654983] processor LNXCPU:00: registered as cooling_device0
[ 20.655628] ACPI: SSDT 00000000bf77e550 00487 (v01 DpgPmm P002Ist 00000012
INTL 20051117)
[ 20.656151] processor LNXCPU:01: registered as cooling_device1
[ 20.656778] ACPI: SSDT 00000000bf77e9e0 00487 (v01 DpgPmm P003Ist 00000012
INTL 20051117)
[ 20.657359] processor LNXCPU:02: registered as cooling_device2
[ 20.658103] ACPI: SSDT 00000000bf77ee70 00487 (v01 DpgPmm P004Ist 00000012
INTL 20051117)
[ 20.658713] processor LNXCPU:03: registered as cooling_device3
[ 20.659428] ACPI: SSDT 00000000bf77f300 00487 (v01 DpgPmm P005Ist 00000012
INTL 20051117)
[ 20.659955] processor LNXCPU:04: registered as cooling_device4
[ 20.660603] ACPI: SSDT 00000000bf77f790 00487 (v01 DpgPmm P006Ist 00000012
INTL 20051117)
[ 20.661119] processor LNXCPU:05: registered as cooling_device5
[ 20.661737] ACPI: SSDT 00000000bf77fc20 00487 (v01 DpgPmm P007Ist 00000012
INTL 20051117)
[ 20.662252] processor LNXCPU:06: registered as cooling_device6
[ 20.662871] ACPI: SSDT 00000000bf7800b0 00487 (v01 DpgPmm P008Ist 00000012
INTL 20051117)
[ 20.663385] processor LNXCPU:07: registered as cooling_device7
[ 20.663998] ACPI: SSDT 00000000bf780540 00487 (v01 DpgPmm P009Ist 00000012
INTL 20051117)
[ 20.664509] processor LNXCPU:08: registered as cooling_device8
[ 20.665119] ACPI: SSDT 00000000bf7809d0 00487 (v01 DpgPmm P010Ist 00000012
INTL 20051117)
[ 20.665636] processor LNXCPU:09: registered as cooling_device9
[ 20.666268] ACPI: SSDT 00000000bf780e60 00487 (v01 DpgPmm P011Ist 00000012
INTL 20051117)
[ 20.666788] processor LNXCPU:0a: registered as cooling_device10
[ 20.667403] ACPI: SSDT 00000000bf7812f0 00487 (v01 DpgPmm P012Ist 00000012
INTL 20051117)
[ 20.667922] processor LNXCPU:0b: registered as cooling_device11
[ 20.668537] ACPI: SSDT 00000000bf781780 00487 (v01 DpgPmm P013Ist 00000012
INTL 20051117)
[ 20.669057] processor LNXCPU:0c: registered as cooling_device12
[ 20.669668] ACPI: SSDT 00000000bf781c10 00487 (v01 DpgPmm P014Ist 00000012
INTL 20051117)
[ 20.670183] processor LNXCPU:0d: registered as cooling_device13
[ 20.670803] ACPI: SSDT 00000000bf7820a0 00487 (v01 DpgPmm P015Ist 00000012
INTL 20051117)
[ 20.671320] processor LNXCPU:0e: registered as cooling_device14
[ 20.671936] ACPI: SSDT 00000000bf782530 00487 (v01 DpgPmm P016Ist 00000012
INTL 20051117)
[ 20.672452] processor LNXCPU:0f: registered as cooling_device15
[ 22.304844] svc: failed to register lockdv1 RPC service (errno 97).
[ 22.374153] fuse init (API version 7.13)
[ 22.664205] lp: driver loaded but no devices found
[ 22.707242] ppdev: user-space parallel port driver
** Model information
sys_vendor: HP
product_name: ProLiant DL160 G6
product_version:
chassis_vendor: HP
chassis_version:
bios_vendor: HP
bios_version: O33
** Loaded modules:
Module Size Used by
cn 4563 1
acpi_cpufreq 5571 1
parport_pc 18855 0
ppdev 5030 0
cpufreq_powersave 902 0
lp 7462 0
cpufreq_conservative 5162 0
cpufreq_stats 2659 0
parport 27954 3 parport_pc,ppdev,lp
cpufreq_userspace 1992 0
fuse 50625 1
evdev 7352 5
joydev 8459 0
serio_raw 3752 0
processor 29935 1 acpi_cpufreq
button 4650 0
nfs 241066 2
lockd 57603 1 nfs
fscache 29834 1 nfs
nfs_acl 2031 1 nfs
auth_rpcgss 33476 1 nfs
sunrpc 161541 15 nfs,lockd,nfs_acl,auth_rpcgss
aufs 127395 1
r8169 29229 0
mii 3210 1 r8169
sg 18744 0
usbhid 33292 0
sr_mod 12602 0
hid 63225 1 usbhid
sd_mod 29889 0
cdrom 29415 1 sr_mod
crc_t10dif 1276 1 sd_mod
ata_generic 3047 0
ata_piix 21124 0
uhci_hcd 18521 0
libata 133632 2 ata_generic,ata_piix
ehci_hcd 31151 0
scsi_mod 122149 4 sg,sr_mod,sd_mod,libata
usbcore 122034 4 usbhid,uhci_hcd,ehci_hcd
igb 77959 0
nls_base 6377 1 usbcore
dca 3761 1 igb
thermal 11674 0
thermal_sys 11942 2 processor,thermal
** Network interface configuration:
auto lo
iface lo inet loopback
iface eth0 inet manual
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether 00:26:55:7e:b0:10 brd ff:ff:ff:ff:ff:ff
inet 160.228.16.23/24 brd 160.228.16.255 scope global eth0
inet6 fe80::226:55ff:fe7e:b010/64 scope link
valid_lft forever preferred_lft forever
3: eth1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN qlen
1000
link/ether 00:26:55:7e:b0:11 brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo: 5056 58 0 0 0 0 0 0 5056
58 0 0 0 0 0 0
eth0:1839292305 1728909 0 0 0 0 0 0 601536950
1050434 0 0 0 0 0 0
eth1: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
877821 total packets received
4 with invalid addresses
0 forwarded
0 incoming packets discarded
877817 incoming packets delivered
736654 requests sent out
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
27 active connections openings
6 passive connection openings
0 failed connection attempts
1 connection resets received
9 connections established
877047 segments received
735159 segments send out
825 segments retransmited
0 bad segments received.
145 resets sent
Udp:
670 packets received
0 packets to unknown port received.
0 packet receive errors
670 packets sent
UdpLite:
TcpExt:
21 TCP sockets finished time wait in fast timer
18630 delayed acks sent
4 delayed acks further delayed because of locked socket
10 packets directly queued to recvmsg prequeue.
20626 bytes directly in process context from backlog
138 bytes directly received in process context from prequeue
642302 packet headers predicted
73 packets header predicted and directly queued to user
44411 acknowledgments not containing data payload received
291679 predicted acknowledgments
187 times recovered from packet loss by selective acknowledgements
328 TCP data loss events
TCPLostRetransmit: 2
3 timeouts after SACK recovery
648 fast retransmits
123 forward retransmits
30 retransmits in slow start
15 other TCP timeouts
3 SACK retransmits failed
TCPSackShifted: 4071
TCPSackMerged: 718
TCPSackShiftFallback: 350
IpExt:
InBcastPkts: 100
InOctets: 1770977251
OutOctets: 573760225
InBcastOctets: 23900
*** Device features:
eth0: 0x2114bb3
eth1: 0x2114bb3
lo: 0x13865
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 5520 I/O Hub to ESI Port
[8086:3406] (rev 13)
Subsystem: Hewlett-Packard Company Device [103c:330b]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping-
SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express
Root Port 1 [8086:3408] (rev 13) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping-
SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express
Root Port 3 [8086:340a] (rev 13) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping-
SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:07.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express
Root Port 7 [8086:340e] (rev 13) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping-
SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:09.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express
Root Port 9 [8086:3410] (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping-
SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=06, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fbd00000-fbefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0a.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express
Root Port 10 [8086:3411] (rev 13) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping-
SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:14.0 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub System Management
Registers [8086:342e] (rev 13) (prog-if 00 [8259])
Subsystem: Device [003c:000b]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:14.1 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad
Registers [8086:3422] (rev 13) (prog-if 00 [8259])
Subsystem: Device [003c:000b]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:14.2 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub Control Status and
RAS Registers [8086:3423] (rev 13) (prog-if 00 [8259])
Subsystem: Device [003c:000b]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:1a.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI
Controller #4 [8086:3a37] (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:330b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at c480 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2
EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:330b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at faefa000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express
Root Port 1 [8086:3a40] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping-
SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: c0000000-c03fffff
Prefetchable memory behind bridge: 00000000f9f00000-00000000f9ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express
Root Port 5 [8086:3a48] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: faf00000-fbcfffff
Prefetchable memory behind bridge: 00000000f8000000-00000000f8ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI
Controller #1 [8086:3a34] (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:330b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at c800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI
Controller #2 [8086:3a35] (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:330b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at c880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI
Controller #3 [8086:3a36] (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:330b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at cc00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2
EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:330b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at faefc000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
90) (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping-
SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIR (ICH10R) LPC Interface
Controller [8086:3a16]
Subsystem: Hewlett-Packard Company Device [103c:330b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping-
SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 4 port
SATA IDE Controller #1 [8086:3a20] (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company Device [103c:330b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ff90 [size=16]
Region 5: I/O ports at ffa0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.5 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 2 port
SATA IDE Controller #2 [8086:3a26] (prog-if 85 [Master SecO PriO])
Subsystem: Hewlett-Packard Company Device [103c:330b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at dc00 [size=8]
Region 1: I/O ports at d880 [size=4]
Region 2: I/O ports at d800 [size=8]
Region 3: I/O ports at d480 [size=4]
Region 4: I/O ports at d400 [size=16]
Region 5: I/O ports at d080 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
02:00.0 VGA compatible controller [0300]: Matrox Graphics, Inc. MGA G200e
[Pilot] ServerEngines (SEP1) [102b:0522] (rev 02) (prog-if 00 [VGA controller])
Subsystem: Emulex Corporation Device [19a2:0100]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort+
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=16M]
Region 1: Memory at fbcfc000 (32-bit, non-prefetchable) [size=16K]
Region 2: Memory at fb000000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at faff0000 [disabled] [size=64K]
Capabilities: <access denied>
05:00.0 Ethernet controller [0200]: Intel Corporation 82576 Gigabit Network
Connection [8086:10c9] (rev 01)
Subsystem: Hewlett-Packard Company NC362i Integrated Dual port Gigabit Server
Adapter [103c:323f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping-
SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 32
Region 0: Memory at fbe20000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at fbe00000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at e880 [size=32]
Region 3: Memory at fbdfc000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at fbdc0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: igb
05:00.1 Ethernet controller [0200]: Intel Corporation 82576 Gigabit Network
Connection [8086:10c9] (rev 01)
Subsystem: Hewlett-Packard Company NC362i Integrated Dual port Gigabit Server
Adapter [103c:323f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping-
SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 42
Region 0: Memory at fbee0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at fbec0000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at ec00 [size=32]
Region 3: Memory at fbebc000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at fbe80000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: igb
** Sound cards:
-- System Information:
Debian Release: 6.0
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-amd64 (SMP w/16 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=ANSI_X3.4-1968)
(ignored: LC_ALL set to C)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii debconf [debconf-2.0] 1.5.36 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.7 tools for generating an initramfs
ii linux-base 2.6.32-30 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-amd64 recommends:
ii firmware-linux-free 2.6.32-30 Binary firmware for various driver
Versions of packages linux-image-2.6.32-5-amd64 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false
linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true
linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64:
Reply to: