Bug#610507: squeeze/amd64 kernel: 180 seconds timeout when booting
Package: linux-image-2.6.32-5-amd64
Version: 2.6.32-30
When booting, there is a timeout of 180s between "nouveau" driver is initialized and swap activation.
See attached dmesg output (see: line 961)
To reproduce: reboot
Processor: Intel Xeon W3530 (8 cores)
Kind regards,
Fabrice Aeschbacher
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-30) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Jan 12 03:40:32 UTC 2011
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=8d187647-5f66-4ed9-aaf4-6d27c665d164 ro quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d000 (usable)
[ 0.000000] BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000df7b0000 (usable)
[ 0.000000] BIOS-e820: 00000000df7b0000 - 00000000df7c3000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000df7c3000 - 00000000df7c4000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000df7c4000 - 00000000e0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000220000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x220000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 1 base 220000000 mask FE0000000 uncachable
[ 0.000000] 2 base 000000000 mask E00000000 write-back
[ 0.000000] 3 base 200000000 mask FC0000000 write-back
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xdf7b0 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000df7b0000
[ 0.000000] 0000000000 - 00df600000 page 2M
[ 0.000000] 00df600000 - 00df7b0000 page 4k
[ 0.000000] kernel direct mapping tables up to df7b0000 @ 10000-16000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000220000000
[ 0.000000] 0100000000 - 0220000000 page 2M
[ 0.000000] kernel direct mapping tables up to 220000000 @ 14000-1e000
[ 0.000000] RAMDISK: 37740000 - 37fef87b
[ 0.000000] ACPI: RSDP 00000000000f8cf0 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 00000000df7bd0f9 000EC (v01 FSC PC 00060000 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000df7c1b08 000F4 (v03 FSC PC 00060000 PTL 000F4240)
[ 0.000000] ACPI: DSDT 00000000df7bd1e5 048AF (v01 FSC D2778-C1 00060000 MSFT 03000001)
[ 0.000000] ACPI: FACS 00000000df7c3fc0 00040
[ 0.000000] ACPI: TCPA 00000000df7c1bfc 00032 (v01 Phoeni x 00060000 TL 00000000)
[ 0.000000] ACPI: SSDT 00000000df7c1c2e 0009E (v01 FSC CST_PR00 00060000 CSF 00000001)
[ 0.000000] ACPI: SSDT 00000000df7c1ccc 0009E (v01 FSC CST_PR01 00060000 CSF 00000001)
[ 0.000000] ACPI: SSDT 00000000df7c1d6a 0009E (v01 FSC CST_PR02 00060000 CSF 00000001)
[ 0.000000] ACPI: SSDT 00000000df7c1e08 0009E (v01 FSC CST_PR03 00060000 CSF 00000001)
[ 0.000000] ACPI: SSDT 00000000df7c1ea6 0009E (v01 FSC CST_PR04 00060000 CSF 00000001)
[ 0.000000] ACPI: SSDT 00000000df7c1f44 0009E (v01 FSC CST_PR05 00060000 CSF 00000001)
[ 0.000000] ACPI: SSDT 00000000df7c1fe2 0009E (v01 FSC CST_PR06 00060000 CSF 00000001)
[ 0.000000] ACPI: SSDT 00000000df7c2080 0009E (v01 FSC CST_PR07 00060000 CSF 00000001)
[ 0.000000] ACPI: SSDT 00000000df7c211e 0013A (v01 FSC PST_PR00 00060000 CSF 00000001)
[ 0.000000] ACPI: SSDT 00000000df7c2258 0013A (v01 FSC PST_PR01 00060000 CSF 00000001)
[ 0.000000] ACPI: SSDT 00000000df7c2392 0013A (v01 FSC PST_PR02 00060000 CSF 00000001)
[ 0.000000] ACPI: SSDT 00000000df7c24cc 0013A (v01 FSC PST_PR03 00060000 CSF 00000001)
[ 0.000000] ACPI: SSDT 00000000df7c2606 0013A (v01 FSC PST_PR04 00060000 CSF 00000001)
[ 0.000000] ACPI: SSDT 00000000df7c2740 0013A (v01 FSC PST_PR05 00060000 CSF 00000001)
[ 0.000000] ACPI: SSDT 00000000df7c287a 0013A (v01 FSC PST_PR06 00060000 CSF 00000001)
[ 0.000000] ACPI: SSDT 00000000df7c29b4 0013A (v01 FSC PST_PR07 00060000 CSF 00000001)
[ 0.000000] ACPI: ASF! 00000000df7c2aee 00070 (v32 OEMID OEMTBL 00060000 PTL 00000001)
[ 0.000000] ACPI: DMAR 00000000df7c2b5e 001C8 (v01 Intel OEMDMAR 00060000 LOHR 00000001)
[ 0.000000] ACPI: SLIC 00000000df7c2d26 00176 (v01 FSC PC 00060000 LTP 00000000)
[ 0.000000] ACPI: MCFG 00000000df7c2e9c 0003C (v01 PTLTD MCFG 00060000 LTP 00000000)
[ 0.000000] ACPI: HPET 00000000df7c2ed8 00038 (v01 PTLTD HPETTBL 00060000 LTP 00000001)
[ 0.000000] ACPI: APIC 00000000df7c2f10 000C8 (v01 PTLTD ? APIC 00060000 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000df7c2fd8 00028 (v01 PTLTD $SBFTBL$ 00060000 LTP 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000220000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000220000000
[ 0.000000] NODE_DATA [0000000000019000 - 0000000000020fff]
[ 0.000000] bootmap [0000000000021000 - 0000000000064fff] pages 44
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0220000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 000168a414] TEXT DATA BSS ==> [0001000000 - 000168a414]
[ 0.000000] #3 [0037740000 - 0037fef87b] RAMDISK ==> [0037740000 - 0037fef87b]
[ 0.000000] #4 [000009d000 - 0000100000] BIOS reserved ==> [000009d000 - 0000100000]
[ 0.000000] #5 [000168b000 - 000168b25c] BRK ==> [000168b000 - 000168b25c]
[ 0.000000] #6 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000]
[ 0.000000] #7 [0000014000 - 0000019000] PGTABLE ==> [0000014000 - 0000019000]
[ 0.000000] found SMP MP-table at [ffff8800000f8d20] f8d20
[ 0.000000] [ffffea0000000000-ffffea00077fffff] PMD -> [ffff880001800000-ffff8800089fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00220000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000df7b0
[ 0.000000] 0: 0x00100000 -> 0x00220000
[ 0.000000] On node 0 totalpages: 2094909
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 111 pages reserved
[ 0.000000] DMA zone: 3814 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 897000 pages, LIFO batch:31
[ 0.000000] Normal zone: 16128 pages used for memmap
[ 0.000000] Normal zone: 1163520 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 48
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000df7b0000 - 00000000df7c3000
[ 0.000000] PM: Registered nosave memory: 00000000df7c3000 - 00000000df7c4000
[ 0.000000] PM: Registered nosave memory: 00000000df7c4000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffb00000
[ 0.000000] PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:10000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880008c00000 s90328 r8192 d24360 u262144
[ 0.000000] pcpu-alloc: s90328 r8192 d24360 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2064334
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=8d187647-5f66-4ed9-aaf4-6d27c665d164 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff880008dde000 - ffff88000cdde000
[ 0.000000] software IO TLB at phys 0x8dde000 - 0xcdde000
[ 0.000000] Memory: 8179948k/8912896k available (3079k kernel code, 533260k absent, 199688k reserved, 1892k data, 592k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:880
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 2800.266 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.53 BogoMIPS (lpj=11201064)
[ 0.000015] Security Framework initialized
[ 0.000018] SELinux: Disabled at boot.
[ 0.000421] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002016] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.002758] Mount-cache hash table entries: 256
[ 0.002850] Initializing cgroup subsys ns
[ 0.002853] Initializing cgroup subsys cpuacct
[ 0.002856] Initializing cgroup subsys devices
[ 0.002857] Initializing cgroup subsys freezer
[ 0.002859] Initializing cgroup subsys net_cls
[ 0.002873] CPU: Physical Processor ID: 0
[ 0.002874] CPU: Processor Core ID: 0
[ 0.002877] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.002878] CPU: L2 cache: 256K
[ 0.002879] CPU: L3 cache: 8192K
[ 0.002881] CPU 0/0x0 -> Node 0
[ 0.002883] mce: CPU supports 9 MCE banks
[ 0.002892] CPU0: Thermal monitoring enabled (TM1)
[ 0.002895] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 SHD:8
[ 0.002901] using mwait in idle threads.
[ 0.002902] Performance Events: Nehalem/Corei7 events, Intel PMU driver.
[ 0.002906] ... version: 3
[ 0.002907] ... bit width: 48
[ 0.002908] ... generic registers: 4
[ 0.002909] ... value mask: 0000ffffffffffff
[ 0.002910] ... max period: 000000007fffffff
[ 0.002911] ... fixed-purpose events: 3
[ 0.002912] ... event mask: 000000070000000f
[ 0.003570] ACPI: Core revision 20090903
[ 0.059169] DMAR: Host address width 36
[ 0.059172] DMAR: DRHD base: 0x000000fed14000 flags: 0x1
[ 0.059179] IOMMU fed14000: ver 1:0 cap c90780106f0462 ecap f02076
[ 0.059180] DMAR: RMRR base: 0x000000df7cc000 end: 0x000000df7dbfff
[ 0.059183] DMAR: RMRR base: 0x000000df7e4000 end: 0x000000df7e4fff
[ 0.059184] DMAR: RMRR base: 0x000000df7e5000 end: 0x000000df7e5fff
[ 0.059186] DMAR: RMRR base: 0x000000df7e6000 end: 0x000000df7e6fff
[ 0.059188] DMAR: RMRR base: 0x000000df7ea000 end: 0x000000df7eafff
[ 0.059190] DMAR: RMRR base: 0x000000df7e7000 end: 0x000000df7e7fff
[ 0.059192] DMAR: RMRR base: 0x000000df7e8000 end: 0x000000df7e8fff
[ 0.059196] DMAR: RMRR base: 0x000000df7e9000 end: 0x000000df7e9fff
[ 0.059198] DMAR: RMRR base: 0x000000df7eb000 end: 0x000000df7ebfff
[ 0.059199] DMAR: ATSR flags: 0x0
[ 0.059208] Setting APIC routing to flat
[ 0.059659] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.099269] CPU0: Intel(R) Xeon(R) CPU W3530 @ 2.80GHz stepping 05
[ 0.204518] Booting processor 1 APIC 0x2 ip 0x6000
[ 0.214684] Initializing CPU#1
[ 0.292238] CPU: Physical Processor ID: 0
[ 0.292239] CPU: Processor Core ID: 1
[ 0.292240] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.292242] CPU: L2 cache: 256K
[ 0.292242] CPU: L3 cache: 8192K
[ 0.292244] CPU 1/0x2 -> Node 0
[ 0.292254] CPU1: Thermal monitoring enabled (TM1)
[ 0.292256] CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.292281] CPU1: Intel(R) Xeon(R) CPU W3530 @ 2.80GHz stepping 05
[ 0.292287] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.312317] Booting processor 2 APIC 0x4 ip 0x6000
[ 0.322579] Initializing CPU#2
[ 0.400019] CPU: Physical Processor ID: 0
[ 0.400020] CPU: Processor Core ID: 2
[ 0.400022] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.400023] CPU: L2 cache: 256K
[ 0.400024] CPU: L3 cache: 8192K
[ 0.400026] CPU 2/0x4 -> Node 0
[ 0.400035] CPU2: Thermal monitoring enabled (TM1)
[ 0.400038] CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.400080] CPU2: Intel(R) Xeon(R) CPU W3530 @ 2.80GHz stepping 05
[ 0.400085] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.420116] Booting processor 3 APIC 0x6 ip 0x6000
[ 0.430378] Initializing CPU#3
[ 0.507803] CPU: Physical Processor ID: 0
[ 0.507804] CPU: Processor Core ID: 3
[ 0.507806] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.507807] CPU: L2 cache: 256K
[ 0.507808] CPU: L3 cache: 8192K
[ 0.507810] CPU 3/0x6 -> Node 0
[ 0.507820] CPU3: Thermal monitoring enabled (TM1)
[ 0.507822] CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.507897] CPU3: Intel(R) Xeon(R) CPU W3530 @ 2.80GHz stepping 05
[ 0.507902] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.527939] Booting processor 4 APIC 0x1 ip 0x6000
[ 0.538102] Initializing CPU#4
[ 0.615583] CPU: Physical Processor ID: 0
[ 0.615584] CPU: Processor Core ID: 0
[ 0.615586] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.615587] CPU: L2 cache: 256K
[ 0.615588] CPU: L3 cache: 8192K
[ 0.615590] CPU 4/0x1 -> Node 0
[ 0.615601] CPU4: Thermal monitoring enabled (TM1)
[ 0.615603] CPU 4 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 0.615616] CPU4: Intel(R) Xeon(R) CPU W3530 @ 2.80GHz stepping 05
[ 0.615622] checking TSC synchronization [CPU#0 -> CPU#4]: passed.
[ 0.635657] Booting processor 5 APIC 0x3 ip 0x6000
[ 0.645918] Initializing CPU#5
[ 0.723366] CPU: Physical Processor ID: 0
[ 0.723367] CPU: Processor Core ID: 1
[ 0.723369] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.723370] CPU: L2 cache: 256K
[ 0.723371] CPU: L3 cache: 8192K
[ 0.723373] CPU 5/0x3 -> Node 0
[ 0.723382] CPU5: Thermal monitoring enabled (TM1)
[ 0.723385] CPU 5 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 0.723478] CPU5: Intel(R) Xeon(R) CPU W3530 @ 2.80GHz stepping 05
[ 0.723484] checking TSC synchronization [CPU#0 -> CPU#5]: passed.
[ 0.743519] Booting processor 6 APIC 0x5 ip 0x6000
[ 0.753779] Initializing CPU#6
[ 0.831145] CPU: Physical Processor ID: 0
[ 0.831146] CPU: Processor Core ID: 2
[ 0.831148] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.831149] CPU: L2 cache: 256K
[ 0.831150] CPU: L3 cache: 8192K
[ 0.831151] CPU 6/0x5 -> Node 0
[ 0.831161] CPU6: Thermal monitoring enabled (TM1)
[ 0.831163] CPU 6 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 0.831183] CPU6: Intel(R) Xeon(R) CPU W3530 @ 2.80GHz stepping 05
[ 0.831188] checking TSC synchronization [CPU#0 -> CPU#6]: passed.
[ 0.851223] Booting processor 7 APIC 0x7 ip 0x6000
[ 0.861484] Initializing CPU#7
[ 0.938927] CPU: Physical Processor ID: 0
[ 0.938928] CPU: Processor Core ID: 3
[ 0.938930] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.938931] CPU: L2 cache: 256K
[ 0.938931] CPU: L3 cache: 8192K
[ 0.938933] CPU 7/0x7 -> Node 0
[ 0.938943] CPU7: Thermal monitoring enabled (TM1)
[ 0.938945] CPU 7 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 0.938986] CPU7: Intel(R) Xeon(R) CPU W3530 @ 2.80GHz stepping 05
[ 0.938992] checking TSC synchronization [CPU#0 -> CPU#7]: passed.
[ 0.958975] Brought up 8 CPUs
[ 0.958976] Total of 8 processors activated (44671.13 BogoMIPS).
[ 0.962249] CPU0 attaching sched-domain:
[ 0.962251] domain 0: span 0,4 level SIBLING
[ 0.962253] groups: 0 (cpu_power = 589) 4 (cpu_power = 589)
[ 0.962257] domain 1: span 0-7 level MC
[ 0.962258] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178)
[ 0.962265] CPU1 attaching sched-domain:
[ 0.962266] domain 0: span 1,5 level SIBLING
[ 0.962268] groups: 1 (cpu_power = 589) 5 (cpu_power = 589)
[ 0.962271] domain 1: span 0-7 level MC
[ 0.962272] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178)
[ 0.962278] CPU2 attaching sched-domain:
[ 0.962280] domain 0: span 2,6 level SIBLING
[ 0.962281] groups: 2 (cpu_power = 589) 6 (cpu_power = 589)
[ 0.962284] domain 1: span 0-7 level MC
[ 0.962285] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178)
[ 0.962291] CPU3 attaching sched-domain:
[ 0.962292] domain 0: span 3,7 level SIBLING
[ 0.962294] groups: 3 (cpu_power = 589) 7 (cpu_power = 589)
[ 0.962297] domain 1: span 0-7 level MC
[ 0.962298] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178)
[ 0.962304] CPU4 attaching sched-domain:
[ 0.962305] domain 0: span 0,4 level SIBLING
[ 0.962306] groups: 4 (cpu_power = 589) 0 (cpu_power = 589)
[ 0.962310] domain 1: span 0-7 level MC
[ 0.962311] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178)
[ 0.962317] CPU5 attaching sched-domain:
[ 0.962318] domain 0: span 1,5 level SIBLING
[ 0.962319] groups: 5 (cpu_power = 589) 1 (cpu_power = 589)
[ 0.962322] domain 1: span 0-7 level MC
[ 0.962324] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178)
[ 0.962329] CPU6 attaching sched-domain:
[ 0.962331] domain 0: span 2,6 level SIBLING
[ 0.962332] groups: 6 (cpu_power = 589) 2 (cpu_power = 589)
[ 0.962335] domain 1: span 0-7 level MC
[ 0.962336] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178)
[ 0.962342] CPU7 attaching sched-domain:
[ 0.962343] domain 0: span 3,7 level SIBLING
[ 0.962345] groups: 7 (cpu_power = 589) 3 (cpu_power = 589)
[ 0.962348] domain 1: span 0-7 level MC
[ 0.962349] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178)
[ 0.962608] devtmpfs: initialized
[ 0.965867] regulator: core version 0.5
[ 0.965901] NET: Registered protocol family 16
[ 0.965961] ACPI: bus type pci registered
[ 0.966014] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 7
[ 0.966016] PCI: MCFG area at f0000000 reserved in E820
[ 0.966207] PCI: Using MMCONFIG at f0000000 - f07fffff
[ 0.966208] PCI: Using configuration type 1 for base access
[ 0.966629] bio: create slab <bio-0> at 0
[ 0.968276] ACPI: EC: Look up EC in DSDT
[ 0.971934] ACPI: Interpreter enabled
[ 0.971936] ACPI: (supports S0 S3 S4 S5)
[ 0.971949] ACPI: Using IOAPIC for interrupt routing
[ 0.976165] ACPI: No dock devices found.
[ 0.976191] ACPI: PCI Root Bridge [CPU0] (0000:3f)
[ 0.976865] ACPI: PCI Root Bridge [CPU1] (0000:3e)
[ 0.977002] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.977063] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.977066] pci 0000:00:00.0: PME# disabled
[ 0.977123] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.977125] pci 0000:00:01.0: PME# disabled
[ 0.977182] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.977185] pci 0000:00:03.0: PME# disabled
[ 0.977243] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.977246] pci 0000:00:07.0: PME# disabled
[ 0.977449] pci 0000:00:1a.0: reg 20 io port: [0x1820-0x183f]
[ 0.977550] pci 0000:00:1a.1: reg 20 io port: [0x1840-0x185f]
[ 0.977627] pci 0000:00:1a.2: reg 20 io port: [0x1860-0x187f]
[ 0.977691] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf7504000-0xf75043ff]
[ 0.977740] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.977743] pci 0000:00:1a.7: PME# disabled
[ 0.977778] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf7500000-0xf7503fff]
[ 0.977814] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.977817] pci 0000:00:1b.0: PME# disabled
[ 0.977870] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.977873] pci 0000:00:1c.0: PME# disabled
[ 0.977931] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.977934] pci 0000:00:1c.4: PME# disabled
[ 0.977989] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.977992] pci 0000:00:1c.5: PME# disabled
[ 0.978040] pci 0000:00:1d.0: reg 20 io port: [0x1880-0x189f]
[ 0.978100] pci 0000:00:1d.1: reg 20 io port: [0x18a0-0x18bf]
[ 0.978160] pci 0000:00:1d.2: reg 20 io port: [0x18c0-0x18df]
[ 0.978224] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf7505000-0xf75053ff]
[ 0.978272] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.978276] pci 0000:00:1d.7: PME# disabled
[ 0.978384] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.978386] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
[ 0.978389] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 00ff)
[ 0.978447] pci 0000:00:1f.2: reg 10 io port: [0x1c30-0x1c37]
[ 0.978451] pci 0000:00:1f.2: reg 14 io port: [0x1c24-0x1c27]
[ 0.978456] pci 0000:00:1f.2: reg 18 io port: [0x1c28-0x1c2f]
[ 0.978460] pci 0000:00:1f.2: reg 1c io port: [0x1c20-0x1c23]
[ 0.978465] pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff]
[ 0.978469] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf7506000-0xf75067ff]
[ 0.978496] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.978499] pci 0000:00:1f.2: PME# disabled
[ 0.978523] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf7507000-0xf75070ff]
[ 0.978534] pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f]
[ 0.978598] pci 0000:02:00.0: reg 10 32bit mmio: [0xf6000000-0xf6ffffff]
[ 0.978605] pci 0000:02:00.0: reg 14 64bit mmio pref: [0xe0000000-0xefffffff]
[ 0.978613] pci 0000:02:00.0: reg 1c 64bit mmio: [0xf4000000-0xf5ffffff]
[ 0.978617] pci 0000:02:00.0: reg 24 io port: [0x2000-0x207f]
[ 0.978622] pci 0000:02:00.0: reg 30 32bit mmio pref: [0x000000-0x07ffff]
[ 0.982894] pci 0000:00:03.0: bridge io port: [0x2000-0x2fff]
[ 0.982898] pci 0000:00:03.0: bridge 32bit mmio: [0xf4000000-0xf70fffff]
[ 0.982905] pci 0000:00:03.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff]
[ 0.983016] pci 0000:05:00.0: reg 10 io port: [0x3000-0x30ff]
[ 0.983034] pci 0000:05:00.0: reg 18 64bit mmio pref: [0xf7604000-0xf7604fff]
[ 0.983046] pci 0000:05:00.0: reg 20 64bit mmio pref: [0xf7600000-0xf7603fff]
[ 0.983088] pci 0000:05:00.0: supports D1 D2
[ 0.983089] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.983093] pci 0000:05:00.0: PME# disabled
[ 0.983152] pci 0000:05:00.1: reg 10 io port: [0x3400-0x34ff]
[ 0.983170] pci 0000:05:00.1: reg 18 64bit mmio: [0xf710c000-0xf710cfff]
[ 0.983183] pci 0000:05:00.1: reg 20 64bit mmio: [0xf7100000-0xf7103fff]
[ 0.983224] pci 0000:05:00.1: supports D1 D2
[ 0.983225] pci 0000:05:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.983229] pci 0000:05:00.1: PME# disabled
[ 0.983282] pci 0000:05:00.2: reg 10 io port: [0x3800-0x38ff]
[ 0.983300] pci 0000:05:00.2: reg 18 64bit mmio: [0xf710d000-0xf710dfff]
[ 0.983312] pci 0000:05:00.2: reg 20 64bit mmio: [0xf7104000-0xf7107fff]
[ 0.983354] pci 0000:05:00.2: supports D1 D2
[ 0.983355] pci 0000:05:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.983359] pci 0000:05:00.2: PME# disabled
[ 0.983412] pci 0000:05:00.3: reg 10 io port: [0x3c00-0x3cff]
[ 0.983430] pci 0000:05:00.3: reg 18 64bit mmio: [0xf710e000-0xf710e0ff]
[ 0.983442] pci 0000:05:00.3: reg 20 64bit mmio: [0xf7108000-0xf710bfff]
[ 0.983483] pci 0000:05:00.3: supports D1 D2
[ 0.983485] pci 0000:05:00.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.983489] pci 0000:05:00.3: PME# disabled
[ 0.990982] pci 0000:00:1c.4: bridge io port: [0x3000-0x3fff]
[ 0.990985] pci 0000:00:1c.4: bridge 32bit mmio: [0xf7100000-0xf71fffff]
[ 0.990990] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xf7600000-0xf76fffff]
[ 0.991064] pci 0000:07:09.0: reg 10 32bit mmio: [0xf7200000-0xf7200fff]
[ 0.991105] pci 0000:07:09.0: supports D1 D2
[ 0.991106] pci 0000:07:09.0: PME# supported from D0 D1 D2 D3hot
[ 0.991110] pci 0000:07:09.0: PME# disabled
[ 0.991143] pci 0000:00:1e.0: transparent bridge
[ 0.991148] pci 0000:00:1e.0: bridge 32bit mmio: [0xf7200000-0xf72fffff]
[ 0.991175] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.991497] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE1_._PRT]
[ 0.991549] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE3_._PRT]
[ 0.991602] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE7_._PRT]
[ 0.991661] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE1A._PRT]
[ 0.991709] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE1E._PRT]
[ 0.991762] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE1F._PRT]
[ 0.991812] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIH._PRT]
[ 0.997024] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.997099] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.997173] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.997245] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.997310] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.997383] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.997458] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.997530] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.997606] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.997609] vgaarb: loaded
[ 0.997648] PCI: Using ACPI for IRQ routing
[ 0.997809] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.997813] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 1.010914] Switching to clocksource tsc
[ 1.011781] pnp: PnP ACPI init
[ 1.011789] ACPI: bus type pnp registered
[ 1.013720] pnp: PnP ACPI: found 16 devices
[ 1.013722] ACPI: ACPI bus type pnp unregistered
[ 1.013727] system 00:00: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 1.013732] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
[ 1.013734] system 00:05: ioport range 0x500-0x57f has been reserved
[ 1.013736] system 00:05: ioport range 0x800-0x80f has been reserved
[ 1.013738] system 00:05: ioport range 0x810-0x81f has been reserved
[ 1.013740] system 00:05: ioport range 0x1000-0x107f has been reserved
[ 1.013742] system 00:05: ioport range 0x1100-0x110f has been reserved
[ 1.013744] system 00:05: ioport range 0x1180-0x11ff could not be reserved
[ 1.013746] system 00:05: ioport range 0xfe00-0xfe00 has been reserved
[ 1.013748] system 00:05: ioport range 0xff00-0xff00 has been reserved
[ 1.013750] system 00:05: iomem range 0xfec00000-0xfecfffff could not be reserved
[ 1.013752] system 00:05: iomem range 0xfee00000-0xfeefffff could not be reserved
[ 1.013754] system 00:05: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 1.018455] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 1.018457] pci 0000:00:01.0: IO window: disabled
[ 1.018460] pci 0000:00:01.0: MEM window: disabled
[ 1.018462] pci 0000:00:01.0: PREFETCH window: disabled
[ 1.018467] pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
[ 1.018469] pci 0000:00:03.0: IO window: 0x2000-0x2fff
[ 1.018472] pci 0000:00:03.0: MEM window: 0xf4000000-0xf70fffff
[ 1.018475] pci 0000:00:03.0: PREFETCH window: 0x000000e0000000-0x000000efffffff
[ 1.018479] pci 0000:00:07.0: PCI bridge, secondary bus 0000:03
[ 1.018481] pci 0000:00:07.0: IO window: disabled
[ 1.018484] pci 0000:00:07.0: MEM window: disabled
[ 1.018486] pci 0000:00:07.0: PREFETCH window: disabled
[ 1.018490] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
[ 1.018492] pci 0000:00:1c.0: IO window: 0x4000-0x4fff
[ 1.018496] pci 0000:00:1c.0: MEM window: 0xf7300000-0xf74fffff
[ 1.018499] pci 0000:00:1c.0: PREFETCH window: 0x000000f7700000-0x000000f78fffff
[ 1.018504] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:05
[ 1.018506] pci 0000:00:1c.4: IO window: 0x3000-0x3fff
[ 1.018510] pci 0000:00:1c.4: MEM window: 0xf7100000-0xf71fffff
[ 1.018513] pci 0000:00:1c.4: PREFETCH window: 0x000000f7600000-0x000000f76fffff
[ 1.018517] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:06
[ 1.018520] pci 0000:00:1c.5: IO window: 0x5000-0x5fff
[ 1.018523] pci 0000:00:1c.5: MEM window: 0xf7900000-0xf7afffff
[ 1.018526] pci 0000:00:1c.5: PREFETCH window: 0x000000f7b00000-0x000000f7cfffff
[ 1.018531] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:07
[ 1.018532] pci 0000:00:1e.0: IO window: disabled
[ 1.018536] pci 0000:00:1e.0: MEM window: 0xf7200000-0xf72fffff
[ 1.018539] pci 0000:00:1e.0: PREFETCH window: disabled
[ 1.018548] alloc irq_desc for 28 on node -1
[ 1.018549] alloc kstat_irqs on node -1
[ 1.018555] pci 0000:00:01.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
[ 1.018558] pci 0000:00:01.0: setting latency timer to 64
[ 1.018563] alloc irq_desc for 24 on node -1
[ 1.018565] alloc kstat_irqs on node -1
[ 1.018569] pci 0000:00:03.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
[ 1.018571] pci 0000:00:03.0: setting latency timer to 64
[ 1.018576] alloc irq_desc for 30 on node -1
[ 1.018577] alloc kstat_irqs on node -1
[ 1.018581] pci 0000:00:07.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30
[ 1.018584] pci 0000:00:07.0: setting latency timer to 64
[ 1.018590] alloc irq_desc for 16 on node -1
[ 1.018591] alloc kstat_irqs on node -1
[ 1.018594] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.018597] pci 0000:00:1c.0: setting latency timer to 64
[ 1.018603] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.018605] pci 0000:00:1c.4: setting latency timer to 64
[ 1.018611] alloc irq_desc for 17 on node -1
[ 1.018612] alloc kstat_irqs on node -1
[ 1.018615] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.018618] pci 0000:00:1c.5: setting latency timer to 64
[ 1.018623] pci 0000:00:1e.0: setting latency timer to 64
[ 1.018626] pci_bus 0000:3f: resource 0 io: [0x00-0xffff]
[ 1.018627] pci_bus 0000:3f: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 1.018629] pci_bus 0000:3e: resource 0 io: [0x00-0xffff]
[ 1.018631] pci_bus 0000:3e: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 1.018632] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 1.018634] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 1.018636] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
[ 1.018637] pci_bus 0000:02: resource 1 mem: [0xf4000000-0xf70fffff]
[ 1.018639] pci_bus 0000:02: resource 2 pref mem [0xe0000000-0xefffffff]
[ 1.018640] pci_bus 0000:04: resource 0 io: [0x4000-0x4fff]
[ 1.018642] pci_bus 0000:04: resource 1 mem: [0xf7300000-0xf74fffff]
[ 1.018643] pci_bus 0000:04: resource 2 pref mem [0xf7700000-0xf78fffff]
[ 1.018645] pci_bus 0000:05: resource 0 io: [0x3000-0x3fff]
[ 1.018646] pci_bus 0000:05: resource 1 mem: [0xf7100000-0xf71fffff]
[ 1.018648] pci_bus 0000:05: resource 2 pref mem [0xf7600000-0xf76fffff]
[ 1.018650] pci_bus 0000:06: resource 0 io: [0x5000-0x5fff]
[ 1.018651] pci_bus 0000:06: resource 1 mem: [0xf7900000-0xf7afffff]
[ 1.018653] pci_bus 0000:06: resource 2 pref mem [0xf7b00000-0xf7cfffff]
[ 1.018654] pci_bus 0000:07: resource 1 mem: [0xf7200000-0xf72fffff]
[ 1.018656] pci_bus 0000:07: resource 3 io: [0x00-0xffff]
[ 1.018657] pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 1.018676] NET: Registered protocol family 2
[ 1.018832] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 1.019543] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.020860] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.021065] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.021067] TCP reno registered
[ 1.021146] NET: Registered protocol family 1
[ 1.021315] pci 0000:02:00.0: Boot video device
[ 1.021352] Unpacking initramfs...
[ 1.168003] Freeing initrd memory: 8894k freed
[ 1.169280] Simple Boot Flag at 0x50 set to 0x1
[ 1.169741] audit: initializing netlink socket (disabled)
[ 1.169749] type=2000 audit(1295253124.907:1): initialized
[ 1.172640] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.173587] VFS: Disk quotas dquot_6.5.2
[ 1.173630] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.173682] msgmni has been set to 15993
[ 1.173883] alg: No test for stdrng (krng)
[ 1.173916] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.173918] io scheduler noop registered
[ 1.173919] io scheduler anticipatory registered
[ 1.173921] io scheduler deadline registered
[ 1.173941] io scheduler cfq registered (default)
[ 1.174058] alloc irq_desc for 48 on node -1
[ 1.174060] alloc kstat_irqs on node -1
[ 1.174068] pcieport 0000:00:01.0: irq 48 for MSI/MSI-X
[ 1.174074] pcieport 0000:00:01.0: setting latency timer to 64
[ 1.174164] alloc irq_desc for 49 on node -1
[ 1.174165] alloc kstat_irqs on node -1
[ 1.174170] pcieport 0000:00:03.0: irq 49 for MSI/MSI-X
[ 1.174175] pcieport 0000:00:03.0: setting latency timer to 64
[ 1.174258] alloc irq_desc for 50 on node -1
[ 1.174259] alloc kstat_irqs on node -1
[ 1.174263] pcieport 0000:00:07.0: irq 50 for MSI/MSI-X
[ 1.174269] pcieport 0000:00:07.0: setting latency timer to 64
[ 1.174349] alloc irq_desc for 51 on node -1
[ 1.174350] alloc kstat_irqs on node -1
[ 1.174356] pcieport 0000:00:1c.0: irq 51 for MSI/MSI-X
[ 1.174362] pcieport 0000:00:1c.0: setting latency timer to 64
[ 1.174453] alloc irq_desc for 52 on node -1
[ 1.174454] alloc kstat_irqs on node -1
[ 1.174460] pcieport 0000:00:1c.4: irq 52 for MSI/MSI-X
[ 1.174466] pcieport 0000:00:1c.4: setting latency timer to 64
[ 1.174557] alloc irq_desc for 53 on node -1
[ 1.174558] alloc kstat_irqs on node -1
[ 1.174564] pcieport 0000:00:1c.5: irq 53 for MSI/MSI-X
[ 1.174570] pcieport 0000:00:1c.5: setting latency timer to 64
[ 1.174633] aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.174638] aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.174641] aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.175518] Linux agpgart interface v0.103
[ 1.175550] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.175638] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.175728] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.175959] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.176067] 00:0e: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.176124] serial 0000:05:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.176128] serial 0000:05:00.1: PCI INT B disabled
[ 1.176140] alloc irq_desc for 18 on node -1
[ 1.176141] alloc kstat_irqs on node -1
[ 1.176146] serial 0000:05:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.176150] serial 0000:05:00.2: PCI INT C disabled
[ 1.176204] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 1.176242] PNP: No PS/2 controller found. Probing ports directly.
[ 1.178999] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.179006] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.179066] mice: PS/2 mouse device common for all mice
[ 1.179093] rtc_cmos 00:07: RTC can wake from S4
[ 1.179123] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 1.179145] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.179153] cpuidle: using governor ladder
[ 1.179154] cpuidle: using governor menu
[ 1.179157] No iBFT detected.
[ 1.179359] TCP cubic registered
[ 1.179427] NET: Registered protocol family 10
[ 1.179728] lo: Disabled Privacy Extensions
[ 1.179899] Mobile IPv6
[ 1.179900] NET: Registered protocol family 17
[ 1.179949] PM: Resume from disk failed.
[ 1.179954] registered taskstats version 1
[ 1.180465] rtc_cmos 00:07: setting system clock to 2011-01-17 08:32:06 UTC (1295253126)
[ 1.180488] Initalizing network drop monitor service
[ 1.180509] Freeing unused kernel memory: 592k freed
[ 1.180590] Write protecting the kernel read-only data: 4236k
[ 1.189491] udev[116]: starting version 164
[ 1.222699] usbcore: registered new interface driver usbfs
[ 1.222722] usbcore: registered new interface driver hub
[ 1.224052] usbcore: registered new device driver usb
[ 1.225161] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.225184] r8169 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.225237] r8169 0000:05:00.0: setting latency timer to 64
[ 1.225281] alloc irq_desc for 54 on node -1
[ 1.225283] alloc kstat_irqs on node -1
[ 1.225297] r8169 0000:05:00.0: irq 54 for MSI/MSI-X
[ 1.225760] eth0: RTL8168dp/8111dp at 0xffffc90002016000, 00:19:99:95:d3:21, XID 08a00000 IRQ 54
[ 1.226543] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.226564] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.226582] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.226585] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.226604] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.226629] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.227776] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.230506] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 1.230520] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf7504000
[ 1.235041] SCSI subsystem initialized
[ 1.245478] libata version 3.00 loaded.
[ 1.246073] alloc irq_desc for 19 on node -1
[ 1.246074] alloc kstat_irqs on node -1
[ 1.246079] firewire_ohci 0000:07:09.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.246408] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.246425] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.246427] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.246428] usb usb1: Product: EHCI Host Controller
[ 1.246429] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 1.246431] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.246480] usb usb1: configuration #1 chosen from 1 choice
[ 1.246507] hub 1-0:1.0: USB hub found
[ 1.246514] hub 1-0:1.0: 6 ports detected
[ 1.246565] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.246570] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.246572] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.246579] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
[ 1.246606] uhci_hcd 0000:00:1a.0: irq 19, io base 0x00001820
[ 1.246632] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.246634] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.246635] usb usb2: Product: UHCI Host Controller
[ 1.246636] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 1.246637] usb usb2: SerialNumber: 0000:00:1a.0
[ 1.246678] usb usb2: configuration #1 chosen from 1 choice
[ 1.246695] hub 2-0:1.0: USB hub found
[ 1.246699] hub 2-0:1.0: 2 ports detected
[ 1.246741] alloc irq_desc for 23 on node -1
[ 1.246743] alloc kstat_irqs on node -1
[ 1.246748] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.246759] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.246761] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.246767] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
[ 1.246786] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.250667] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.250677] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7505000
[ 1.270794] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.270811] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.270814] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.270817] usb usb3: Product: EHCI Host Controller
[ 1.270819] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 1.270821] usb usb3: SerialNumber: 0000:00:1d.7
[ 1.270884] usb usb3: configuration #1 chosen from 1 choice
[ 1.270903] hub 3-0:1.0: USB hub found
[ 1.270907] hub 3-0:1.0: 6 ports detected
[ 1.270947] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 1.270951] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.270954] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.270959] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.270980] uhci_hcd 0000:00:1a.1: irq 18, io base 0x00001840
[ 1.271001] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.271003] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.271004] usb usb4: Product: UHCI Host Controller
[ 1.271005] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 1.271007] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.271042] usb usb4: configuration #1 chosen from 1 choice
[ 1.271060] hub 4-0:1.0: USB hub found
[ 1.271063] hub 4-0:1.0: 2 ports detected
[ 1.271097] ahci 0000:00:1f.2: version 3.0
[ 1.271105] ahci 0000:00:1f.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.271134] alloc irq_desc for 55 on node -1
[ 1.271135] alloc kstat_irqs on node -1
[ 1.271142] ahci 0000:00:1f.2: irq 55 for MSI/MSI-X
[ 1.271205] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 1.271208] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part ccc
[ 1.271212] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.271423] scsi0 : ahci
[ 1.271490] scsi1 : ahci
[ 1.271545] scsi2 : ahci
[ 1.271595] scsi3 : ahci
[ 1.271647] scsi4 : ahci
[ 1.271703] scsi5 : ahci
[ 1.271827] ata1: SATA max UDMA/133 abar m2048@0xf7506000 port 0xf7506100 irq 55
[ 1.271829] ata2: SATA max UDMA/133 abar m2048@0xf7506000 port 0xf7506180 irq 55
[ 1.271831] ata3: SATA max UDMA/133 abar m2048@0xf7506000 port 0xf7506200 irq 55
[ 1.271833] ata4: SATA max UDMA/133 abar m2048@0xf7506000 port 0xf7506280 irq 55
[ 1.271835] ata5: SATA max UDMA/133 abar m2048@0xf7506000 port 0xf7506300 irq 55
[ 1.271838] ata6: SATA max UDMA/133 abar m2048@0xf7506000 port 0xf7506380 irq 55
[ 1.271858] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.271864] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.271867] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.271875] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.271898] uhci_hcd 0000:00:1a.2: irq 18, io base 0x00001860
[ 1.271923] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.271925] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.271926] usb usb5: Product: UHCI Host Controller
[ 1.271927] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 1.271929] usb usb5: SerialNumber: 0000:00:1a.2
[ 1.271973] usb usb5: configuration #1 chosen from 1 choice
[ 1.271990] hub 5-0:1.0: USB hub found
[ 1.271994] hub 5-0:1.0: 2 ports detected
[ 1.272027] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.272031] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.272034] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.272043] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.272063] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
[ 1.272084] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.272085] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.272087] usb usb6: Product: UHCI Host Controller
[ 1.272088] usb usb6: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 1.272089] usb usb6: SerialNumber: 0000:00:1d.0
[ 1.272125] usb usb6: configuration #1 chosen from 1 choice
[ 1.272142] hub 6-0:1.0: USB hub found
[ 1.272145] hub 6-0:1.0: 2 ports detected
[ 1.272176] alloc irq_desc for 22 on node -1
[ 1.272178] alloc kstat_irqs on node -1
[ 1.272182] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 1.272187] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.272189] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.272194] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.272219] uhci_hcd 0000:00:1d.1: irq 22, io base 0x000018a0
[ 1.272241] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.272242] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.272244] usb usb7: Product: UHCI Host Controller
[ 1.272245] usb usb7: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 1.272246] usb usb7: SerialNumber: 0000:00:1d.1
[ 1.272280] usb usb7: configuration #1 chosen from 1 choice
[ 1.272305] hub 7-0:1.0: USB hub found
[ 1.272308] hub 7-0:1.0: 2 ports detected
[ 1.272338] alloc irq_desc for 21 on node -1
[ 1.272340] alloc kstat_irqs on node -1
[ 1.272343] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 1.272348] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.272350] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.272354] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.272380] uhci_hcd 0000:00:1d.2: irq 21, io base 0x000018c0
[ 1.272400] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.272402] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.272403] usb usb8: Product: UHCI Host Controller
[ 1.272405] usb usb8: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 1.272406] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.272442] usb usb8: configuration #1 chosen from 1 choice
[ 1.272459] hub 8-0:1.0: USB hub found
[ 1.272462] hub 8-0:1.0: 2 ports detected
[ 1.314962] firewire_ohci: Added fw-ohci device 0000:07:09.0, OHCI version 1.0
[ 1.589974] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.589981] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.589990] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.753653] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.753657] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.753675] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.755156] ata2.00: ATAPI: Optiarc DVD RW AD-7250H, 1.81, max UDMA/100
[ 1.756980] ata2.00: configured for UDMA/100
[ 1.757598] ata1.00: ATA-8: WDC WD1500HLFS-50G6U1, 04.04V05, max UDMA/133
[ 1.757601] ata1.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.760860] ata1.00: configured for UDMA/133
[ 1.760961] scsi 0:0:0:0: Direct-Access ATA WDC WD1500HLFS-5 04.0 PQ: 0 ANSI: 5
[ 1.761247] ata3.00: ATA-8: WDC WD3000HLFS-50G6U1, 04.04V05, max UDMA/133
[ 1.761250] ata3.00: 586072368 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.762239] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7250H 1.81 PQ: 0 ANSI: 5
[ 1.769245] ata3.00: configured for UDMA/133
[ 1.769325] scsi 2:0:0:0: Direct-Access ATA WDC WD3000HLFS-5 04.0 PQ: 0 ANSI: 5
[ 1.774947] sd 0:0:0:0: [sda] 293046768 512-byte logical blocks: (150 GB/139 GiB)
[ 1.774995] sd 0:0:0:0: [sda] Write Protect is off
[ 1.774997] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.775017] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.775153] sda:sr0: scsi3-mmc drive: 32x/32x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.777346] Uniform CD-ROM driver Revision: 3.20
[ 1.777444] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.777498] sd 2:0:0:0: [sdb] 586072368 512-byte logical blocks: (300 GB/279 GiB)
[ 1.777524] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.777525] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.777536] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.777617] sdb: sda1 sda2 sda3 sda4
[ 1.780794] sdb1
[ 1.780993] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1.787648] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.789777] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.789795] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.789813] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.799074] usb 2-1: new low speed USB device using uhci_hcd and address 2
[ 1.813607] firewire_core: created device fw0: GUID 003005b3500ba002, S400
[ 1.977208] usb 2-1: New USB device found, idVendor=046d, idProduct=c05b
[ 1.977212] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.977215] usb 2-1: Product: USB Optical Mouse
[ 1.977217] usb 2-1: Manufacturer: Logitech
[ 1.977286] usb 2-1: configuration #1 chosen from 1 choice
[ 1.984964] usbcore: registered new interface driver hiddev
[ 1.999293] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1:1.0/input/input1
[ 1.999335] generic-usb 0003:046D:C05B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.0-1/input0
[ 1.999347] usbcore: registered new interface driver usbhid
[ 1.999349] usbhid: v2.6:USB HID core driver
[ 2.039698] PM: Starting manual resume from disk
[ 2.039700] PM: Resume from partition 8:2
[ 2.039701] PM: Checking hibernation image.
[ 2.039799] PM: Error -22 checking image file
[ 2.039801] PM: Resume from disk failed.
[ 2.060790] kjournald starting. Commit interval 5 seconds
[ 2.060804] EXT3-fs: mounted filesystem with ordered data mode.
[ 2.221526] usb 4-1: new low speed USB device using uhci_hcd and address 2
[ 2.402795] usb 4-1: New USB device found, idVendor=0bf8, idProduct=100c
[ 2.402798] usb 4-1: New USB device strings: Mfr=1, Product=4, SerialNumber=0
[ 2.402801] usb 4-1: Product: FSC KBPC PX
[ 2.402803] usb 4-1: Manufacturer: Fujitsu Siemens Computers GmbH
[ 2.402882] usb 4-1: configuration #1 chosen from 1 choice
[ 2.440850] input: Fujitsu Siemens Computers GmbH FSC KBPC PX as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input2
[ 2.440880] generic-usb 0003:0BF8:100C.0002: input,hidraw1: USB HID v1.10 Keyboard [Fujitsu Siemens Computers GmbH FSC KBPC PX ] on usb-0000:00:1a.1-1/input0
[ 2.471711] input: Fujitsu Siemens Computers GmbH FSC KBPC PX as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.1/input/input3
[ 2.471746] generic-usb 0003:0BF8:100C.0003: input,hidraw2: USB HID v1.10 Device [Fujitsu Siemens Computers GmbH FSC KBPC PX ] on usb-0000:00:1a.1-1/input1
[ 2.879573] udev[527]: starting version 164
[ 3.213786] processor LNXCPU:00: registered as cooling_device0
[ 3.213864] processor LNXCPU:01: registered as cooling_device1
[ 3.213943] processor LNXCPU:02: registered as cooling_device2
[ 3.214032] processor LNXCPU:03: registered as cooling_device3
[ 3.214115] processor LNXCPU:04: registered as cooling_device4
[ 3.214198] processor LNXCPU:05: registered as cooling_device5
[ 3.214281] processor LNXCPU:06: registered as cooling_device6
[ 3.214358] processor LNXCPU:07: registered as cooling_device7
[ 3.215638] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 3.215643] ACPI: Power Button [PWRB]
[ 3.215701] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 3.215705] ACPI: Power Button [PWRF]
[ 3.216069] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 3.222316] ipmi message handler version 39.2
[ 3.336066] IPMI System Interface driver.
[ 3.336102] ipmi_si 0000:05:00.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 3.336106] ipmi_si: Trying PCI-specified kcs state machine at i/o address 0x3c00, slave address 0x0, irq 19
[ 3.339850] parport_pc 00:0f: reported by Plug and Play ACPI
[ 3.339908] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 3.400163] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.439588] tpm_inf_pnp 00:04: Found TPM with ID IFX0102
[ 3.477582] [drm] Initialized drm 1.1.0 20060810
[ 3.611074] nouveau 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
[ 3.611079] nouveau 0000:02:00.0: setting latency timer to 64
[ 3.612399] [drm] nouveau 0000:02:00.0: Detected an NV50 generation card (0x094c00a1)
[ 3.613080] [drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PRAMIN
[ 3.682360] [drm] nouveau 0000:02:00.0: ... appears to be valid
[ 3.682362] [drm] nouveau 0000:02:00.0: BIT BIOS found
[ 3.682364] [drm] nouveau 0000:02:00.0: Bios version 62.94.85.00
[ 3.682367] [drm] nouveau 0000:02:00.0: TMDS table revision 2.0 not currently supported
[ 3.682369] [drm] nouveau 0000:02:00.0: Found Display Configuration Block version 4.0
[ 3.682371] [drm] nouveau 0000:02:00.0: DCB connector table: VHER 0x40 5 16 4
[ 3.682372] [drm] nouveau 0000:02:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07
[ 3.682374] [drm] nouveau 0000:02:00.0: 1: 0x00050146: type 0x46 idx 1 tag 0x51
[ 3.682376] [drm] nouveau 0000:02:00.0: 2: 0x000a0246: type 0x46 idx 2 tag 0x52
[ 3.682378] [drm] nouveau 0000:02:00.0: Raw DCB entry 0: 02000300 00000028
[ 3.682380] [drm] nouveau 0000:02:00.0: Raw DCB entry 1: 01000302 00020030
[ 3.682382] [drm] nouveau 0000:02:00.0: Raw DCB entry 2: 02011386 0f200010
[ 3.682384] [drm] nouveau 0000:02:00.0: Raw DCB entry 3: 02011332 00020010
[ 3.682385] [drm] nouveau 0000:02:00.0: Raw DCB entry 4: 040223a6 0f200010
[ 3.682387] [drm] nouveau 0000:02:00.0: Raw DCB entry 5: 04022342 00020010
[ 3.682388] [drm] nouveau 0000:02:00.0: Raw DCB entry 6: 0000000e 00000000
[ 3.682394] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0xD6A1
[ 3.734090] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0xDB18
[ 3.753920] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0xEB19
[ 3.753927] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0xEC3A
[ 3.761979] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset 0xEF55
[ 3.761981] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table at offset 0xEFBA
[ 3.785867] [drm] nouveau 0000:02:00.0: 0xEFBA: Condition still not met after 20ms, skipping following opcodes
[ 3.785875] [drm] nouveau 0000:02:00.0: 0xC538: parsing output script 0
[ 3.785880] [drm] nouveau 0000:02:00.0: 0xC804: parsing output script 0
[ 3.785883] [drm] nouveau 0000:02:00.0: 0xC538: parsing output script 0
[ 3.785889] [drm] nouveau 0000:02:00.0: 0xC804: parsing output script 0
[ 3.785891] [drm] nouveau 0000:02:00.0: 0xC538: parsing output script 0
[ 3.917936] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 3.918042] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 3.932699] [TTM] Zone kernel: Available graphics memory: 4094718 kiB.
[ 3.932701] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[ 3.932710] [drm] nouveau 0000:02:00.0: 768 MiB VRAM
[ 4.006428] hda_codec: ALC663: BIOS auto-probing.
[ 4.007976] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[ 4.015078] [drm] nouveau 0000:02:00.0: 512 MiB GART (aperture)
[ 4.015087] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[ 4.015583] [drm] nouveau 0000:02:00.0: Allocating FIFO number 1
[ 4.034374] [drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 1
[ 4.035892] [drm] nouveau 0000:02:00.0: Detected a DAC output
[ 4.035894] [drm] nouveau 0000:02:00.0: Detected a TMDS output
[ 4.035896] [drm] nouveau 0000:02:00.0: Detected a DP output
[ 4.035897] [drm] nouveau 0000:02:00.0: Detected a TMDS output
[ 4.035899] [drm] nouveau 0000:02:00.0: Detected a DP output
[ 4.035900] [drm] nouveau 0000:02:00.0: Detected a TMDS output
[ 4.035902] [drm] nouveau 0000:02:00.0: Detected a DVI-I connector
[ 4.035933] [drm] nouveau 0000:02:00.0: Detected a DisplayPort connector
[ 4.035949] [drm] nouveau 0000:02:00.0: Detected a DisplayPort connector
[ 4.354058] [drm] nouveau 0000:02:00.0: allocated 1280x1024 fb: 0x40250000, bo ffff88021debde00
[ 4.359507] [drm] nouveau 0000:02:00.0: 0xC556: parsing output script 1
[ 4.359517] [drm] nouveau 0000:02:00.0: 0xC564: parsing output script 2
[ 4.359527] [drm] nouveau 0000:02:00.0: 0xC1B2: parsing clock script 0
[ 4.359876] [drm] nouveau 0000:02:00.0: 0xBD56: parsing clock script 1
[ 4.360288] Console: switching to colour frame buffer device 160x64
[ 4.362667] fb0: nouveaufb frame buffer device
[ 4.362668] registered panic notifier
[ 4.362671] [drm] Initialized nouveau 0.0.15 20090420 for 0000:02:00.0 on minor 0
[ 182.966462] Adding 15625208k swap on /dev/sda2. Priority:-1 extents:1 across:15625208k
[ 183.089928] EXT3 FS on sda1, internal journal
[ 183.168202] loop: module loaded
[ 184.446643] EXT4-fs (sda4): mounted filesystem with ordered data mode
[ 184.454347] kjournald starting. Commit interval 5 seconds
[ 184.454687] EXT3 FS on sdb1, internal journal
[ 184.454692] EXT3-fs: mounted filesystem with ordered data mode.
Reply to: