Bug#610474: linux-image-2.6.32-5-686: ethernet (atheros ar8152 [1969:2062]) stops working after random time on squeeze
Package: linux-2.6
Version: 2.6.32-29
Severity: normal
*** Please type your report below this line ***
This is strange, and is similar to bug #538410. After a random time of
usage, ethernet stops working.
This should have been fixed starting from kernel 2.6.33-rc4.
I've compiled 2.6.36.2 (from kernel.org) and now the car works.
-- Package-specific info:
** Version:
Linux version 2.6.32-5-686 (Debian 2.6.32-29) (ben@decadent.org.uk) (gcc
version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Fri Dec 10 16:12:40 UTC 2010
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686
root=UUID=c3d25d6d-5f32-4fa7-8a42-99c9275458e7 ro quiet
** Tainted: C (1024)
* Module from drivers/staging has been loaded.
** Kernel log:
[ 2.983166] usb 1-6: SerialNumber: 200901010001
[ 2.983338] usb 1-6: configuration #1 chosen from 1 choice
[ 4.235447] udev[358]: starting version 164
[ 4.602894] input: Lid Switch
as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 4.609203] ACPI: SSDT 7f6902f0 002E4 (v01 PmRef Cpu0Ist 00003000
INTL 20060113)
[ 4.611831] input: PC Speaker
as /devices/platform/pcspkr/input/input2
[ 4.635751] ACPI: SSDT 7f690790 00724 (v01 PmRef Cpu0Cst 00003001
INTL 20060113)
[ 4.636462] ACPI: Lid Switch [LID]
[ 4.636759] input: Sleep Button
as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[ 4.636898] ACPI: Sleep Button [SLPB]
[ 4.637116] input: Power Button
as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 4.637209] ACPI: Power Button [PWRB]
[ 4.643706] Monitor-Mwait will be used to enter C-1 state
[ 4.643799] Monitor-Mwait will be used to enter C-2 state
[ 4.643822] Marking TSC unstable due to TSC halts in idle
[ 4.644123] processor LNXCPU:00: registered as cooling_device0
[ 4.644408] input: Power Button
as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 4.644591] ACPI: Power Button [PWRF]
[ 4.645799] ACPI: SSDT 7f690240 000AB (v01 PmRef Cpu1Ist 00003000
INTL 20060113)
[ 4.647573] ACPI: SSDT 7f690700 00085 (v01 PmRef Cpu1Cst 00003000
INTL 20060113)
[ 4.648485] Switching to clocksource hpet
[ 4.660164] processor LNXCPU:01: registered as cooling_device1
[ 4.661085] ACPI: SSDT 7f690190 000AB (v01 PmRef Cpu2Ist 00003000
INTL 20060113)
[ 4.661848] ACPI: SSDT 7f690670 00085 (v01 PmRef Cpu2Cst 00003000
INTL 20060113)
[ 4.663713] processor LNXCPU:02: registered as cooling_device2
[ 4.664942] ACPI: SSDT 7f6900e0 000AB (v01 PmRef Cpu3Ist 00003000
INTL 20060113)
[ 4.665874] ACPI: SSDT 7f6905e0 00085 (v01 PmRef Cpu3Cst 00003000
INTL 20060113)
[ 4.669985] processor LNXCPU:03: registered as cooling_device3
[ 4.710337] ACPI: Battery Slot [BAT0] (battery present)
[ 4.711060] ACPI: AC Adapter [AC0] (on-line)
[ 4.845955] cfg80211: Using static regulatory domain info
[ 4.845963] cfg80211: Regulatory domain: US
[ 4.845969] (start_freq - end_freq @ bandwidth), (max_antenna_gain,
max_eirp)
[ 4.845979] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700
mBm)
[ 4.845989] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300
mBm)
[ 4.845998] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300
mBm)
[ 4.846008] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300
mBm)
[ 4.846017] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300
mBm)
[ 4.846026] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000
mBm)
[ 4.846049] cfg80211: Calling CRDA for country: US
[ 5.056123] [drm] Initialized drm 1.1.0 20060810
[ 5.059075] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 21 (level, low)
-> IRQ 21
[ 5.059093] ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts
with ACPI region SMRG [0x400-0x40f]
[ 5.059191] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 5.208636] Linux video capture interface: v2.00
[ 5.313631] uvcvideo: Found UVC 1.00 device USB2.0 UVC VGA WebCam
(13d3:5702)
[ 5.332066] input: USB2.0 UVC VGA WebCam
as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input6
[ 5.332244] usbcore: registered new interface driver uvcvideo
[ 5.332256] USB Video Class driver (v0.1.0)
[ 5.680796] Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1c0b1, caps:
0xd04731/0xa40000/0xa0400
[ 5.700628] brcm80211: module is from the staging directory, the
quality is unknown, you have been warned.
[ 5.719300] brcm80211 0000:02:00.0: PCI INT A -> GSI 17 (level, low)
-> IRQ 17
[ 5.719315] brcm80211 0000:02:00.0: setting latency timer to 64
[ 5.719382] brcm80211 0000:02:00.0: firmware: requesting
brcm/bcm43xx-0.fw
[ 5.751538] input: SynPS/2 Synaptics TouchPad
as /devices/platform/i8042/serio1/input/input7
[ 5.816625] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 5.816639] i915 0000:00:02.0: setting latency timer to 64
[ 5.827666] i915 0000:00:02.0: irq 28 for MSI/MSI-X
[ 5.827685] [drm] set up 7M of stolen space
[ 5.854613] brcm80211 0000:02:00.0: firmware: requesting
brcm/bcm43xx_hdr-0.fw
[ 5.931083] [drm] initialized overlay support
[ 6.155061] Found chip type AI (0x13814313)
[ 6.158917] Changing max_res_mask to 0xffff
[ 6.158923] Changing min_res_mask to 0x200d
[ 6.165018] Applying 4313 WARs
[ 6.166068] wlc_bmac_attach:: deviceid 0x4727 nbands 1 board 0x2047
macaddr: 48:5d:60:55:3d:51
[ 6.252111] phy0: Selected rate control algorithm 'minstrel'
[ 6.254113] wl_set_hint: Sending country code US to MAC80211
[ 6.254130] wl0: Broadcom BCM43xx 802.11 MAC80211 Driver 5.75.11
(1.82.8.0) (Compiled in . at 16:05:11 on Dec 10 2010)
[ 6.254472] cfg80211: Calling CRDA for country: US
[ 6.381565] [drm] Big FIFO is enabled
[ 6.381584] [drm] Big FIFO is enabled
[ 7.385494] Console: switching to colour frame buffer device 170x48
[ 7.399926] fb0: inteldrmfb frame buffer device
[ 7.399931] registered panic notifier
[ 7.402069] ACPI Warning: _BQC returned an invalid level
(20090903/video-631)
[ 7.419885] acpi device:2b: registered as cooling_device4
[ 7.420218] input: Video Bus
as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 7.420337] ACPI: Video Device [VGA] (multi-head: yes rom: no post:
no)
[ 7.420380] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on
minor 0
[ 7.420767] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low)
-> IRQ 22
[ 7.420900] HDA Intel 0000:00:1b.0: irq 29 for MSI/MSI-X
[ 7.420954] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.761505] ALSA hda_codec.c:337: hda_codec: connection list not
available for 0x24
[ 7.762547] input: HDA Digital PCBeep
as /devices/pci0000:00/0000:00:1b.0/input/input9
[ 8.582288] Adding 1952760k swap on /dev/sda3. Priority:-1 extents:1
across:1952760k
[ 9.100594] EXT3 FS on sda1, internal journal
[ 9.223727] loop: module loaded
[ 10.819055] kjournald starting. Commit interval 5 seconds
[ 10.819486] EXT3 FS on sda5, internal journal
[ 10.819496] EXT3-fs: mounted filesystem with ordered data mode.
[ 10.983841] kjournald starting. Commit interval 5 seconds
[ 10.984387] EXT3 FS on sda6, internal journal
[ 10.984397] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.934168] fuse init (API version 7.13)
[ 14.910860] lp: driver loaded but no devices found
[ 15.038063] ppdev: user-space parallel port driver
[ 49.167237] atl1c 0000:01:00.0: irq 30 for MSI/MSI-X
[ 49.167364] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<10 Mbps
Full Duplex>
[ 59.392036] eth0: no IPv6 routers present
** Model information
not available
** Loaded modules:
Module Size Used by
parport_pc 15799 0
ppdev 4058 0
lp 5570 0
parport 22554 3 parport_pc,ppdev,lp
fuse 43941 1
loop 9765 0
snd_hda_codec_realtek 174591 1
snd_hda_intel 15419 0
snd_hda_codec 55141 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 4150 1 snd_hda_codec
snd_pcm 47971 2 snd_hda_intel,snd_hda_codec
arc4 974 2
ecb 1405 2
snd_seq 35627 0
snd_timer 12338 2 snd_pcm,snd_seq
joydev 6739 0
snd_seq_device 3857 1 snd_seq
i915 222064 2
brcm80211 574779 0
uvcvideo 45514 0
snd 35269 8
snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
drm_kms_helper 18301 1 i915
videodev 25545 1 uvcvideo
mac80211 123574 1 brcm80211
soundcore 3450 1 snd
snd_page_alloc 4921 2 snd_hda_intel,snd_pcm
v4l1_compat 10250 2 uvcvideo,videodev
i2c_i801 6462 0
drm 112088 3 i915,drm_kms_helper
cfg80211 87657 2 brcm80211,mac80211
psmouse 44657 0
i2c_algo_bit 3497 1 i915
rfkill 10264 1 cfg80211
i2c_core 12696 6
i915,drm_kms_helper,videodev,i2c_i801,drm,i2c_algo_bit
video 14605 1 i915
evdev 5609 13
pcspkr 1207 0
ac 1640 0
output 1204 1 video
serio_raw 2916 0
button 3598 1 i915
processor 26327 4
battery 3782 0
ext3 94204 3
jbd 32169 1 ext3
mbcache 3762 1 ext3
sd_mod 25969 5
crc_t10dif 1012 1 sd_mod
ahci 27270 4
uhci_hcd 16057 0
libata 115753 1 ahci
thermal 9206 0
ehci_hcd 27851 0
atl1c 23936 0
scsi_mod 101421 2 sd_mod,libata
usbcore 98453 4 uvcvideo,uhci_hcd,ehci_hcd
nls_base 4541 1 usbcore
thermal_sys 9378 3 video,processor,thermal
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
#allow-hotplug eth0
iface eth0 inet dhcp
#iface eth0 inet static
# mtu 1492
# address 192.168.0.45
# netmask 255.255.255.0
# network 192.168.0.0
# broadcast 192.168.0.255
# gateway 192.168.0.3
# dns-* options are implemented by the resolvconf package, if installed
# dns-nameservers 85.37.17.7
dns-search gundam.local
iface wlan0 inet dhcp
#iface wlan0 inet static
# mtu 1492
# address 192.168.0.46
# netmask 255.255.255.0
# network 192.168.0.0
# broadcast 192.168.0.255
# gateway 192.168.0.1
# gateway 192.168.0.3
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers 85.37.17.7
dns-search gundam.local
iface dsl-provider inet ppp
pre-up /sbin/ifconfig wlan0 up # line maintained by pppoeconf
provider dsl-provider
#auto wlan0
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
state UP qlen 1000
link/ether bc:ae:c5:1a:ca:95 brd ff:ff:ff:ff:ff:ff
inet 130.243.135.15/24 brd 130.243.135.255 scope global eth0
inet6 fe80::beae:c5ff:fe1a:ca95/64 scope link
valid_lft forever preferred_lft forever
3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 48:5d:60:55:3d:51 brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive |
Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo: 560 8 0 0 0 0 0 0
560 8 0 0 0 0 0 0
eth0:69366557 54093 0 0 0 0 0 16
2409945 28341 0 0 0 0 1 0
wlan0: 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
48529 total packets received
2 with invalid addresses
0 forwarded
0 incoming packets discarded
48511 incoming packets delivered
28243 requests sent out
16 dropped because of missing route
Icmp:
9 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
echo requests: 1
echo replies: 8
11 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 2
echo request: 8
echo replies: 1
IcmpMsg:
InType0: 8
InType8: 1
OutType0: 1
OutType3: 2
OutType8: 8
Tcp:
226 active connections openings
0 passive connection openings
8 failed connection attempts
18 connection resets received
3 connections established
48162 segments received
27861 segments send out
20 segments retransmited
0 bad segments received.
115 resets sent
Udp:
298 packets received
2 packets to unknown port received.
0 packet receive errors
349 packets sent
UdpLite:
TcpExt:
47 TCP sockets finished time wait in fast timer
192 delayed acks sent
Quick ack mode was activated 2 times
45626 packet headers predicted
418 acknowledgments not containing data payload received
531 predicted acknowledgments
2 congestion windows recovered without slow start after partial ack
11 other TCP timeouts
2 DSACKs sent for old packets
3 connections reset due to unexpected data
17 connections reset due to early user close
8 connections aborted due to timeout
IpExt:
InMcastPkts: 9
OutMcastPkts: 13
InBcastPkts: 42
InOctets: 68355230
OutOctets: 2005980
InMcastOctets: 2141
OutMcastOctets: 2542
InBcastOctets: 6079
*** Device features:
eth0: 0x110989
lo: 0x13865
wlan0: 0x2000
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation N10 Family DMI Bridge
[8086:a010] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:83ac]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation N10 Family
Integrated Graphics Controller [8086:a011] (rev 02) (prog-if 00 [VGA
controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:8446]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 28
Region 0: Memory at f7e00000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at dc00 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at f7d00000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation N10 Family
Integrated Graphics Controller [8086:a012] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:8446]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f7e80000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High
Definition Audio Controller [8086:27d8] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:841c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 29
Region 0: Memory at f7cf8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI
Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 80000000-801fffff
Prefetchable memory behind bridge: 0000000080200000-00000000803fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI
Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f8000000-fbffffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f6ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI
Express Port 3 [8086:27d4] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f7f00000-f7ffffff
Prefetchable memory behind bridge: 0000000080400000-00000000805fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB
UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at d400 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB
UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at d480 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB
UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 20
Region 4: I/O ports at d800 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB
UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at d880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2
EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7cf7c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller
[8086:27bc] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation N10/ICH7 Family SATA
AHCI Controller [8086:27c1] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 27
Region 0: I/O ports at d080 [size=8]
Region 1: I/O ports at d000 [size=4]
Region 2: I/O ports at cc00 [size=8]
Region 3: I/O ports at c880 [size=4]
Region 4: I/O ports at c800 [size=32]
Region 5: Memory at f7cf7800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus
Controller [8086:27da] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 0400 [size=32]
01:00.0 Ethernet controller [0200]: Atheros Communications AR8152 v2.0
Fast Ethernet [1969:2062] (rev c1)
Subsystem: ASUSTeK Computer Inc. Device [1043:8468]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 30
Region 0: Memory at f7fc0000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at ec00 [size=128]
Capabilities: <access denied>
Kernel driver in use: atl1c
02:00.0 Network controller [0280]: Broadcom Corporation BCM4313
802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01)
Subsystem: AzureWave Device [1a3b:2047]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fbffc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: brcm80211
** USB devices:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 13d3:5702 IMC Networks
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 6.0
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-686 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-686 depends on:
ii debconf [debconf-2.0] 1.5.36 Debian configuration
management sy
ii initramfs-tools [linux-initra 0.98.7 tools for generating an
initramfs
ii linux-base 2.6.32-29 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux
kernel mo
Versions of packages linux-image-2.6.32-5-686 recommends:
pn firmware-linux-free <none> (no description available)
ii libc6-i686 2.11.2-7 Embedded GNU C Library:
Shared lib
Versions of packages linux-image-2.6.32-5-686 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-686/prerm/removing-running-kernel-2.6.32-5-686:
true
linux-image-2.6.32-5-686/postinst/depmod-error-initrd-2.6.32-5-686:
false
linux-image-2.6.32-5-686/postinst/ignoring-do-bootloader-2.6.32-5-686:
linux-image-2.6.32-5-686/postinst/missing-firmware-2.6.32-5-686:
Reply to: