--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: Output LVDS gone on Intel Mobile 915GM
- From: Stefan Ott <stefan@ott.net>
- Date: Thu, 18 Feb 2010 12:31:13 +0100
- Message-id: <20100218113113.2246.74918.reportbug@localhost>
Package: linux-2.6
Version: 2.6.32-5
Severity: important
It seems some changes happened between the 2.6.30-2-686 and the
2.6.32-trunk-686 kernel images that are causing the LVDS output on my ASUS R2H
UMPC (Intel Mobile 915GM) to no-longer show up (you'll find dmesg output from
both kernel versions attached). Since the external VGA output and the internal
LCD screen cannot run at the same resolution (the internal screen uses 800x640,
the VGA output does not support that resolution and the LCD doesn't support
any of the 'normal' resolutions) this effectively renders the LCD screen
unusable.
Just for completeness' sake you will also find xrand output and Xorg logs
attached.
Please let me know if there's anything more I can do to help debugging this.
-- Package-specific info:
** Version:
Linux version 2.6.32-trunk-686 (Debian 2.6.32-5) (ben@decadent.org.uk) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Sun Jan 10 06:32:16 UTC 2010
** Command line:
BOOT_IMAGE=//vmlinuz-2.6.32-trunk-686 root=UUID=a8e85f6a-e579-47b1-9322-83d4ad9e59fe ro quiet splash
** Not tainted
** Kernel log:
[ 4.752201] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.752208] usb 3-2: Product: USB Keyboard
[ 4.752212] usb 3-2: Manufacturer:
[ 4.752419] usb 3-2: configuration #1 chosen from 1 choice
[ 4.804123] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input6
[ 4.804239] generic-usb 0003:04D9:1606.0003: input,hidraw2: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:1d.1-2/input0
[ 4.891401] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.1/input/input7
[ 4.891504] generic-usb 0003:04D9:1606.0004: input,hidraw3: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:1d.1-2/input1
[ 5.000033] usb 5-2: new full speed USB device using uhci_hcd and address 2
[ 5.254200] usb 5-2: New USB device found, idVendor=0b05, idProduct=1712
[ 5.254209] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=3
[ 5.254215] usb 5-2: SerialNumber: 0194E8-5B-0002
[ 5.254398] usb 5-2: configuration #1 chosen from 1 choice
[ 7.343134] udev: starting version 150
[ 7.873333] Marking TSC unstable due to TSC halts in idle
[ 7.887577] Switching to clocksource hpet
[ 7.891366] processor LNXCPU:00: registered as cooling_device0
[ 7.948399] ACPI: AC Adapter [AC0] (on-line)
[ 8.055439] ACPI: Battery Slot [BAT0] (battery present)
[ 8.150362] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 8.690665] Asus Laptop ACPI Extras version 0.30
[ 8.769845] unsupported model R2H, trying default values
[ 8.769887] send /proc/acpi/dsdt to the developers
[ 8.869694] asus_laptop: Asus Laptop Support version 0.42
[ 8.879952] asus_laptop: R2H model detected
[ 9.080427] intel_rng: FWH not detected
[ 9.249741] Linux video capture interface: v2.00
[ 9.289590] input: Asus Laptop extra buttons as /devices/virtual/input/input9
[ 9.289806] Registered led device: asus::mail
[ 9.399581] cfg80211: Using static regulatory domain info
[ 9.399588] cfg80211: Regulatory domain: US
[ 9.399592] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 9.399599] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 9.399607] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 9.399614] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 9.399620] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 9.399626] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 9.399633] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 9.400050] cfg80211: Calling CRDA for country: US
[ 9.965709] uvcvideo: Found UVC 1.00 device <unnamed> (046d:09c1)
[ 10.002153] input: UVC Camera (046d:09c1) as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/input/input10
[ 10.002307] usbcore: registered new interface driver uvcvideo
[ 10.002316] USB Video Class driver (v0.1.0)
[ 10.011692] Bluetooth: Core ver 2.15
[ 10.012055] NET: Registered protocol family 31
[ 10.012060] Bluetooth: HCI device and connection manager initialized
[ 10.012066] Bluetooth: HCI socket layer initialized
[ 10.016655] stkwebcam: Syntek USB2.0 Camera is now controlling video device /dev/video1
[ 10.016729] usbcore: registered new interface driver stkwebcam
[ 10.088063] usb 1-6: reset high speed USB device using ehci_hcd and address 6
[ 10.498678] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 10.499214] usbcore: registered new interface driver btusb
[ 10.614401] usbcore: registered new interface driver snd-usb-audio
[ 10.815963] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 10.816108] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 10.921222] phy0: Selected rate control algorithm 'minstrel'
[ 10.922514] zd1211rw 1-6:1.0: phy0
[ 10.922597] usbcore: registered new interface driver zd1211rw
[ 11.417015] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
[ 12.130258] Adding 987988k swap on /dev/hda2. Priority:-1 extents:1 across:987988k
[ 12.482472] EXT3 FS on hda3, internal journal
[ 14.449967] r8169: eth0: link up
[ 14.449978] r8169: eth0: link up
[ 16.513141] fuse init (API version 7.13)
[ 24.716031] eth0: no IPv6 routers present
[ 244.444930] [drm] Initialized drm 1.1.0 20060810
[ 244.518180] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 244.518191] i915 0000:00:02.0: setting latency timer to 64
[ 244.530183] [drm] set up 15M of stolen space
[ 244.666731] [drm] DAC-6: set mode 640x480 0
[ 244.807263] [drm] TV-8: set mode NTSC 480i 0
[ 244.952549] Console: switching to colour frame buffer device 106x30
[ 244.952571] fb0: inteldrmfb frame buffer device
[ 244.952575] registered panic notifier
[ 244.952591] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 245.000116] render error detected, EIR: 0x00000010
[ 245.000125] page table error
[ 245.000129] PGTBL_ER: 0x00000100
[ 245.000136] [drm:i915_handle_error] *ERROR* EIR stuck: 0x00000010, masking
[ 245.000150] render error detected, EIR: 0x00000010
[ 245.000154] page table error
[ 245.000157] PGTBL_ER: 0x00000100
[ 245.017371] [drm] TV-8: set mode 848x480 1b
[ 245.248744] [drm] DAC-6: set mode 640x480 0
[ 245.393576] [drm] DAC-6: set mode 640x480 0
[ 245.578589] [drm] DAC-6: set mode 640x480 0
[ 245.723669] [drm] DAC-6: set mode 640x480 0
[ 249.299173] [drm] DAC-6: set mode 640x480 0
[ 249.444013] [drm] DAC-6: set mode 640x480 0
[ 249.629271] [drm] DAC-6: set mode 640x480 0
[ 249.774099] [drm] DAC-6: set mode 640x480 0
[ 253.357202] [drm] DAC-6: set mode 640x480 0
[ 253.505810] [drm] DAC-6: set mode 640x480 0
[ 253.690656] [drm] DAC-6: set mode 640x480 0
[ 253.835484] [drm] DAC-6: set mode 640x480 0
[ 283.149911] [drm] DAC-6: set mode 1280x1024 27
[ 291.723028] [drm] DAC-6: set mode 1d
[ 308.195481] input: PS/2 Generic Mouse as /devices/platform/i8042/serio3/input/input12
[ 494.803172] [drm] DAC-6: set mode 2c
** Model information
not available
** Loaded modules:
Module Size Used by
i915 217023 2
drm_kms_helper 17183 1 i915
drm 107507 3 i915,drm_kms_helper
i2c_algo_bit 3497 1 i915
fuse 43554 1
ext2 46157 1
snd_hda_codec_analog 45498 1
snd_hda_intel 15263 0
arc4 974 2
snd_hda_codec 45998 2 snd_hda_codec_analog,snd_hda_intel
snd_usb_audio 49746 0
snd_pcm_oss 28479 0
snd_mixer_oss 10461 1 snd_pcm_oss
btusb 7997 0
ecb 1405 2
snd_usb_lib 10957 1 snd_usb_audio
snd_pcm 47350 4 snd_hda_intel,snd_hda_codec,snd_usb_audio,snd_pcm_oss
snd_seq_midi 3480 0
snd_seq_midi_event 3684 1 snd_seq_midi
stkwebcam 14681 0
bluetooth 36259 1 btusb
snd_seq 35303 2 snd_seq_midi,snd_seq_midi_event
zd1211rw 32518 0
uvcvideo 45194 1
mac80211 121381 1 zd1211rw
cfg80211 86910 2 zd1211rw,mac80211
rfkill 10196 2 bluetooth,cfg80211
videodev 25445 3 stkwebcam,uvcvideo
snd_timer 12258 2 snd_pcm,snd_seq
snd_rawmidi 12313 2 snd_usb_lib,snd_seq_midi
v4l1_compat 10250 2 uvcvideo,videodev
snd_seq_device 3673 3 snd_seq_midi,snd_seq,snd_rawmidi
snd_hwdep 4054 2 snd_hda_codec,snd_usb_audio
joydev 6771 0
i2c_core 12612 4 i915,drm,i2c_algo_bit,videodev
asus_laptop 11042 0
rng_core 2178 0
snd 33551 12 snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,snd_usb_audio,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq,snd_timer,snd_rawmidi,snd_seq_device,snd_hwdep
psmouse 44409 0
soundcore 3450 1 snd
pcspkr 1207 0
serio_raw 2916 0
evdev 5609 19
battery 3782 0
ac 1640 0
snd_page_alloc 4977 2 snd_hda_intel,snd_pcm
processor 25803 1
ext3 93828 1
jbd 31965 1 ext3
mbcache 3762 2 ext2,ext3
usbhid 26784 0
hid 50545 1 usbhid
ide_gd_mod 17103 4
ide_pci_generic 1924 0
ata_generic 2015 0
libata 113728 1 ata_generic
scsi_mod 101073 1 libata
uhci_hcd 15953 0
sdhci_pci 4493 0
sdhci 12079 1 sdhci_pci
mmc_core 38095 1 sdhci
piix 3564 3
intel_agp 20145 1
r8169 24568 0
led_class 1757 2 asus_laptop,sdhci
ehci_hcd 27230 0
ide_core 63850 3 ide_gd_mod,ide_pci_generic,piix
usbcore 97930 10 snd_usb_audio,btusb,snd_usb_lib,stkwebcam,zd1211rw,uvcvideo,usbhid,uhci_hcd,ehci_hcd
mii 2714 1 r8169
video 14605 1 i915
nls_base 4541 1 usbcore
agpgart 19516 2 drm,intel_agp
button 3598 1 i915
output 1204 1 video
thermal 9206 0
fan 2586 0
thermal_sys 9378 4 processor,video,thermal,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:1997]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2592] (rev 04) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:12f7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at feb80000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at ec00 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at feb40000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2792] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:12f7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at fea80000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller [8086:2668] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:12f2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at feb38000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe800000-fe8fffff
Prefetchable memory behind bridge: 00000000bfe00000-00000000bfefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 04) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:12f7]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at e400 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 04) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:12f7]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at e480 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 04) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:12f7]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at e800 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b] (rev 04) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:12f7]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at e880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 04) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:12f7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at feb3fc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev d4) (prog-if 01 [Subtractive decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Memory behind bridge: fe700000-fe7fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge [8086:2641] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:12f7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller [8086:266f] (rev 04) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Device [1043:12f7]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Kernel driver in use: PIIX_IDE
01:01.0 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 19)
Subsystem: ASUSTeK Computer Inc. Device [1043:12f7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe7ffc00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 01)
Subsystem: ASUSTeK Computer Inc. Device [1043:12f6]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 25
Region 0: I/O ports at d800 [size=256]
Region 2: Memory at fe8ff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at fe8c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
** USB devices:
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 04d9:1606 Holtek Semiconductor, Inc.
Bus 003 Device 002: ID 046d:c016 Logitech, Inc. M-UV69a/HP M-UV96 Optical Wheel Mouse
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 0b05:1712 ASUSTek Computer, Inc. BT-183 Bluetooth 2.0+EDR adapter
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 010: ID 134c:0005
Bus 001 Device 009: ID 08ff:1600 AuthenTec, Inc. AES1600
Bus 001 Device 007: ID 0424:2502 Standard Microsystems Corp.
Bus 001 Device 006: ID 0b05:171b ASUSTek Computer, Inc. A9T wireless 802.11bg
Bus 001 Device 003: ID 046d:09c1 Logitech, Inc. QuickCam Deluxe for Notebooks
Bus 001 Device 002: ID 174f:a311 Syntek 1.3MPixel Web Cam - Asus A3A, A6J, A6K, A6M, A6R, A6T, A6V, A7T, A7sv, A7U
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-trunk-686 (SMP w/1 CPU core)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-trunk-686 depends on:
ii debconf [debconf-2.0] 1.5.28 Debian configuration management sy
ii initramfs-tools [linux-initr 0.93.4 tools for generating an initramfs
ii module-init-tools 3.12~pre1-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-trunk-686 recommends:
ii firmware-linux-free 2.6.32-5 Binary firmware for various driver
ii libc6-i686 2.10.2-2 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.32-trunk-686 suggests:
ii grub 0.97-59 GRand Unified Bootloader (dummy pa
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-trunk-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
-- debconf information excluded
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.30-2-686 (Debian 2.6.30-8squeeze1) (dannf@debian.org) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Fri Dec 4 00:53:20 UTC 2009
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000004efc0000 (usable)
[ 0.000000] BIOS-e820: 000000004efc0000 - 000000004efcf000 (ACPI data)
[ 0.000000] BIOS-e820: 000000004efcf000 - 000000004f000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x4efc0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 040000000 mask FF0000000 write-back
[ 0.000000] 2 base 04F000000 mask FFF000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[ 0.000000] RAMDISK: 3764d000 - 37fefeca
[ 0.000000] Allocated new RAMDISK: 00543000 - 00ee5eca
[ 0.000000] Move RAMDISK from 000000003764d000 - 0000000037fefec9 to 00543000 - 00ee5ec9
[ 0.000000] ACPI: RSDP 000f7270 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 4efc0000 0003C (v01 _ASUS_ Notebook 03000716 MSFT 00000097)
[ 0.000000] ACPI: FACP 4efc0200 00081 (v02 A_M_I_ OEMFACP 03000716 MSFT 00000097)
[ 0.000000] ACPI: DSDT 4efc05b0 08B61 (v01 0AAAA 0AAAA000 00000000 INTL 02002026)
[ 0.000000] ACPI: FACS 4efcf000 00040
[ 0.000000] ACPI: APIC 4efc0390 00054 (v01 A_M_I_ OEMAPIC 03000716 MSFT 00000097)
[ 0.000000] ACPI: MCFG 4efc03f0 0003C (v01 A_M_I_ OEMMCFG 03000716 MSFT 00000097)
[ 0.000000] ACPI: SLIC 4efc0430 00176 (v01 _ASUS_ Notebook 03000716 MSFT 00000097)
[ 0.000000] ACPI: OEMB 4efcf040 00040 (v01 A_M_I_ AMI_OEM 03000716 MSFT 00000097)
[ 0.000000] ACPI: HPET 4efc9120 00038 (v01 A_M_I_ OEMHPET 03000716 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 375MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00011000 - 00017f00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 000053fb10] TEXT DATA BSS ==> [0000100000 - 000053fb10]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [0000540000 - 0000542215] BRK ==> [0000540000 - 0000542215]
[ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #7 [0000543000 - 0000ee5eca] NEW RAMDISK ==> [0000543000 - 0000ee5eca]
[ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0004efc0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0004efc0
[ 0.000000] On node 0 totalpages: 323407
[ 0.000000] free_area_init_node: node 0, pgdat c0408d40, node_mem_map c1000200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 752 pages used for memmap
[ 0.000000] HighMem zone: 95442 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xf000eef3 base: 0xfed00000
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 4f000000:afd14000)
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 11 pages at c19e5000, static data 22172 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 320879
[ 0.000000] Kernel command line: BOOT_IMAGE=//vmlinuz-2.6.30-2-686 root=UUID=a8e85f6a-e579-47b1-9322-83d4ad9e59fe ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] NR_IRQS:1280
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 897.622 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Initializing HighMem for node 0 (000377fe:0004efc0)
[ 0.004000] Memory: 1267620k/1294080k available (2174k kernel code, 25224k reserved, 1138k data, 320k init, 384776k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffe16000 - 0xfffff000 (1956 kB)
[ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.004000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.004000] .init : 0xc0444000 - 0xc0494000 ( 320 kB)
[ 0.004000] .data : 0xc031f865 - 0xc043c2f0 (1138 kB)
[ 0.004000] .text : 0xc0100000 - 0xc031f865 (2174 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 1795.24 BogoMIPS (lpj=3590488)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] Mount-cache hash table entries: 512
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys devices
[ 0.004000] Initializing cgroup subsys freezer
[ 0.004000] Initializing cgroup subsys net_cls
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 512K
[ 0.004000] Intel machine check architecture supported.
[ 0.004000] Intel machine check reporting enabled on CPU#0.
[ 0.004000] Checking 'hlt' instruction... OK.
[ 0.016566] SMP alternatives: switching to UP code
[ 0.022818] Freeing SMP alternatives: 12k freed
[ 0.022835] ACPI: Core revision 20090320
[ 0.044632] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.084594] CPU0: Intel(R) Celeron(R) M processor 900MHz stepping 06
[ 0.088001] APIC calibration not consistent with PM-Timer: 195ms instead of 100ms
[ 0.088001] APIC delta adjusted to PM-Timer: 623436 (1221921)
[ 0.088001] Brought up 1 CPUs
[ 0.088001] Total of 1 processors activated (1795.24 BogoMIPS).
[ 0.088001] CPU0 attaching NULL sched-domain.
[ 0.088001] net_namespace: 1088 bytes
[ 0.088001] Booting paravirtualized kernel on bare hardware
[ 0.088001] regulator: core version 0.5
[ 0.088001] NET: Registered protocol family 16
[ 0.088001] ACPI: bus type pci registered
[ 0.088001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.088001] PCI: Not using MMCONFIG.
[ 0.088001] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
[ 0.088001] PCI: Using configuration type 1 for base access
[ 0.089056] bio: create slab <bio-0> at 0
[ 0.091074] ACPI: EC: Look up EC in DSDT
[ 0.113242] ACPI: Interpreter enabled
[ 0.113267] ACPI: (supports S0 S3 S4 S5)
[ 0.113319] ACPI: Using IOAPIC for interrupt routing
[ 0.113477] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.119909] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.119916] PCI: Using MMCONFIG for extended config space
[ 0.137231] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.137238] ACPI: EC: driver started in poll mode
[ 0.137903] ACPI: No dock devices found.
[ 0.138113] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.138331] pci 0000:00:02.0: reg 10 32bit mmio: [0xfeb80000-0xfebfffff]
[ 0.138341] pci 0000:00:02.0: reg 14 io port: [0xec00-0xec07]
[ 0.138351] pci 0000:00:02.0: reg 18 32bit mmio: [0xd0000000-0xdfffffff]
[ 0.138360] pci 0000:00:02.0: reg 1c 32bit mmio: [0xfeb40000-0xfeb7ffff]
[ 0.138411] pci 0000:00:02.1: reg 10 32bit mmio: [0xfea80000-0xfeafffff]
[ 0.138538] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfeb38000-0xfeb3bfff]
[ 0.138603] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.138611] pci 0000:00:1b.0: PME# disabled
[ 0.138703] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.138711] pci 0000:00:1c.0: PME# disabled
[ 0.138788] pci 0000:00:1d.0: reg 20 io port: [0xe400-0xe41f]
[ 0.138863] pci 0000:00:1d.1: reg 20 io port: [0xe480-0xe49f]
[ 0.138938] pci 0000:00:1d.2: reg 20 io port: [0xe800-0xe81f]
[ 0.139012] pci 0000:00:1d.3: reg 20 io port: [0xe880-0xe89f]
[ 0.139092] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfeb3fc00-0xfeb3ffff]
[ 0.139166] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.139174] pci 0000:00:1d.7: PME# disabled
[ 0.139332] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.139340] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.139350] pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 0250-025f
[ 0.139387] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.139399] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.139411] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.139423] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.139435] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
[ 0.139548] pci 0000:02:00.0: reg 10 io port: [0xd800-0xd8ff]
[ 0.139579] pci 0000:02:00.0: reg 18 64bit mmio: [0xfe8ff000-0xfe8fffff]
[ 0.139611] pci 0000:02:00.0: reg 30 32bit mmio: [0xfe8c0000-0xfe8dffff]
[ 0.139674] pci 0000:02:00.0: supports D1 D2
[ 0.139679] pci 0000:02:00.0: PME# supported from D1 D2 D3hot
[ 0.139688] pci 0000:02:00.0: PME# disabled
[ 0.139765] pci 0000:00:1c.0: bridge io port: [0xd000-0xdfff]
[ 0.139773] pci 0000:00:1c.0: bridge 32bit mmio: [0xfe800000-0xfe8fffff]
[ 0.139785] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xbfe00000-0xbfefffff]
[ 0.139842] pci 0000:01:01.0: reg 10 32bit mmio: [0xfe7ffc00-0xfe7ffcff]
[ 0.139909] pci 0000:01:01.0: supports D1 D2
[ 0.139914] pci 0000:01:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.139923] pci 0000:01:01.0: PME# disabled
[ 0.140047] pci 0000:00:1e.0: transparent bridge
[ 0.140059] pci 0000:00:1e.0: bridge 32bit mmio: [0xfe700000-0xfe7fffff]
[ 0.140084] pci_bus 0000:00: on NUMA node 0
[ 0.140109] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.140519] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.140741] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.150443] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12)
[ 0.150808] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 12)
[ 0.151165] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 12)
[ 0.151522] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 12)
[ 0.151879] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 12) *0, disabled.
[ 0.152265] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 12) *0, disabled.
[ 0.152628] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 12) *0, disabled.
[ 0.152984] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 12)
[ 0.153674] PCI: Using ACPI for IRQ routing
[ 0.154051] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.154063] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.160296] pnp: PnP ACPI init
[ 0.160321] ACPI: bus type pnp registered
[ 0.168391] pnp: PnP ACPI: found 15 devices
[ 0.168398] ACPI: ACPI bus type pnp unregistered
[ 0.168408] PnPBIOS: Disabled by ACPI PNP
[ 0.168439] system 00:07: ioport range 0x680-0x68f has been reserved
[ 0.168453] system 00:08: ioport range 0x250-0x25f has been reserved
[ 0.168460] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.168468] system 00:08: ioport range 0x800-0x87f has been reserved
[ 0.168475] system 00:08: ioport range 0x400-0x41f has been reserved
[ 0.168482] system 00:08: ioport range 0x480-0x4bf has been reserved
[ 0.168491] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.168499] system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.168511] system 00:09: iomem range 0xfec00000-0xfecfffff could not be reserved
[ 0.168518] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.168532] system 00:0a: iomem range 0xffb80000-0xffbfffff has been reserved
[ 0.168539] system 00:0a: iomem range 0xfff80000-0xffffffff has been reserved
[ 0.168551] system 00:0b: iomem range 0xffc00000-0xfff7ffff has been reserved
[ 0.168567] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.168579] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 0.168586] system 00:0e: iomem range 0xc0000-0xcffff could not be reserved
[ 0.168594] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[ 0.168601] system 00:0e: iomem range 0x100000-0x4effffff could not be reserved
[ 0.204019] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.204027] pci 0000:00:1c.0: IO window: 0xd000-0xdfff
[ 0.204037] pci 0000:00:1c.0: MEM window: 0xfe800000-0xfe8fffff
[ 0.204046] pci 0000:00:1c.0: PREFETCH window: 0x000000bfe00000-0x000000bfefffff
[ 0.204058] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
[ 0.204063] pci 0000:00:1e.0: IO window: disabled
[ 0.204072] pci 0000:00:1e.0: MEM window: 0xfe700000-0xfe7fffff
[ 0.204080] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.204113] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.204123] pci 0000:00:1c.0: setting latency timer to 64
[ 0.204135] pci 0000:00:1e.0: setting latency timer to 64
[ 0.204144] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.204151] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.204157] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
[ 0.204164] pci_bus 0000:02: resource 1 mem: [0xfe800000-0xfe8fffff]
[ 0.204170] pci_bus 0000:02: resource 2 pref mem [0xbfe00000-0xbfefffff]
[ 0.204177] pci_bus 0000:01: resource 1 mem: [0xfe700000-0xfe7fffff]
[ 0.204183] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.204189] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
[ 0.204281] NET: Registered protocol family 2
[ 0.204454] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.205052] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.206611] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.207506] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.207512] TCP reno registered
[ 0.207758] NET: Registered protocol family 1
[ 0.207871] Trying to unpack rootfs image as initramfs...
[ 0.504079] Switched to high resolution mode on CPU 0
[ 0.805465] Freeing initrd memory: 9867k freed
[ 0.818476] audit: initializing netlink socket (disabled)
[ 0.818507] type=2000 audit(1266490609.816:1): initialized
[ 0.818879] highmem bounce pool size: 64 pages
[ 0.818890] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.819016] VFS: Disk quotas dquot_6.5.2
[ 0.819081] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.819185] msgmni has been set to 1745
[ 0.819479] alg: No test for stdrng (krng)
[ 0.819608] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.819616] io scheduler noop registered
[ 0.819620] io scheduler anticipatory registered
[ 0.819624] io scheduler deadline registered
[ 0.819652] io scheduler cfq registered (default)
[ 0.819679] pci 0000:00:02.0: Boot video device
[ 0.820076] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.820100] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.820916] isapnp: Scanning for PnP cards...
[ 1.175051] isapnp: No Plug & Play device found
[ 1.182129] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.182319] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.183335] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.186750] brd: module loaded
[ 1.186961] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.189503] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 1.190666] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.190678] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.190685] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.190692] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.190698] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.191056] mice: PS/2 mouse device common for all mice
[ 1.191269] rtc_cmos 00:02: RTC can wake from S4
[ 1.191502] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.191543] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 1.191626] cpuidle: using governor ladder
[ 1.191631] cpuidle: using governor menu
[ 1.191641] No iBFT detected.
[ 1.192360] TCP cubic registered
[ 1.192425] NET: Registered protocol family 10
[ 1.193252] lo: Disabled Privacy Extensions
[ 1.193839] Mobile IPv6
[ 1.193845] NET: Registered protocol family 17
[ 1.193864] Using IPI No-Shortcut mode
[ 1.194206] registered taskstats version 1
[ 1.194425] rtc_cmos 00:02: setting system clock to 2010-02-18 10:56:50 UTC (1266490610)
[ 1.194522] Freeing unused kernel memory: 320k freed
[ 1.194835] Write protecting the kernel text: 2176k
[ 1.194873] Write protecting the kernel read-only data: 772k
[ 1.331652] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.437710] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 1.497246] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.497271] ACPI: Thermal Zone [THRM] (65 C)
[ 1.611450] Linux agpgart interface v0.103
[ 1.631773] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:07/input/input1
[ 1.631789] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[ 1.691463] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.691495] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.691520] r8169 0000:02:00.0: setting latency timer to 64
[ 1.691656] r8169 0000:02:00.0: irq 25 for MSI/MSI-X
[ 1.692843] eth0: RTL8101e at 0xf8102000, 00:1b:fc:62:3c:59, XID 34000000 IRQ 25
[ 1.709035] agpgart-intel 0000:00:00.0: Intel 915GM Chipset
[ 1.709328] agpgart-intel 0000:00:00.0: detected 16124K stolen memory
[ 1.712657] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.747143] Uniform Multi-Platform E-IDE driver
[ 1.909652] piix 0000:00:1f.1: IDE controller (0x8086:0x266f rev 0x04)
[ 1.909682] PIIX_IDE 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.909713] piix 0000:00:1f.1: not 100% native mode: will probe irqs later
[ 1.909725] ide0: BM-DMA at 0xffa0-0xffa7
[ 1.909740] ide1: BM-DMA at 0xffa8-0xffaf
[ 1.909749] Probing IDE interface ide0...
[ 1.923602] sdhci: Secure Digital Host Controller Interface driver
[ 1.923608] sdhci: Copyright(c) Pierre Ossman
[ 1.923969] usbcore: registered new interface driver usbfs
[ 1.924073] usbcore: registered new interface driver hub
[ 1.927865] sdhci-pci 0000:01:01.0: SDHCI controller found [1180:0822] (rev 19)
[ 1.927901] sdhci-pci 0000:01:01.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.930000] Registered led device: mmc0::
[ 1.931057] mmc0: SDHCI controller on PCI [0000:01:01.0] using PIO
[ 1.931661] usbcore: registered new device driver usb
[ 1.941068] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.212254] hda: HTC426040G8CE00, ATA DISK drive
[ 2.884105] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 2.884227] hda: UDMA/100 mode selected
[ 2.884344] Probing IDE interface ide1...
[ 3.452110] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 3.505424] ide1 at 0x170-0x177,0x376 on irq 15
[ 3.505996] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.506031] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3.506039] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.506132] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 3.510068] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.510080] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 3.510107] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfeb3fc00
[ 3.549102] SCSI subsystem initialized
[ 3.550410] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.550492] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.550499] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.550505] usb usb1: Product: EHCI Host Controller
[ 3.550510] usb usb1: Manufacturer: Linux 2.6.30-2-686 ehci_hcd
[ 3.550515] usb usb1: SerialNumber: 0000:00:1d.7
[ 3.550657] usb usb1: configuration #1 chosen from 1 choice
[ 3.550724] hub 1-0:1.0: USB hub found
[ 3.550745] hub 1-0:1.0: 8 ports detected
[ 3.558761] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.558841] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.558857] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.558866] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.558927] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.558966] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e400
[ 3.559045] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.559051] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.559057] usb usb2: Product: UHCI Host Controller
[ 3.559062] usb usb2: Manufacturer: Linux 2.6.30-2-686 uhci_hcd
[ 3.559067] usb usb2: SerialNumber: 0000:00:1d.0
[ 3.559191] usb usb2: configuration #1 chosen from 1 choice
[ 3.559252] hub 2-0:1.0: USB hub found
[ 3.559269] hub 2-0:1.0: 2 ports detected
[ 3.559480] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.559492] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.559501] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.559546] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 3.559614] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e480
[ 3.559675] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.559681] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.559687] usb usb3: Product: UHCI Host Controller
[ 3.559692] usb usb3: Manufacturer: Linux 2.6.30-2-686 uhci_hcd
[ 3.559697] usb usb3: SerialNumber: 0000:00:1d.1
[ 3.559795] usb usb3: configuration #1 chosen from 1 choice
[ 3.559852] hub 3-0:1.0: USB hub found
[ 3.559867] hub 3-0:1.0: 2 ports detected
[ 3.560087] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.560099] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.560106] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.560151] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 3.560197] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e800
[ 3.560259] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.560265] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.560271] usb usb4: Product: UHCI Host Controller
[ 3.560276] usb usb4: Manufacturer: Linux 2.6.30-2-686 uhci_hcd
[ 3.560281] usb usb4: SerialNumber: 0000:00:1d.2
[ 3.560387] usb usb4: configuration #1 chosen from 1 choice
[ 3.560451] hub 4-0:1.0: USB hub found
[ 3.560463] hub 4-0:1.0: 2 ports detected
[ 3.560653] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 3.560664] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 3.560671] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.560720] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 3.560767] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e880
[ 3.560826] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.560833] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.560839] usb usb5: Product: UHCI Host Controller
[ 3.560844] usb usb5: Manufacturer: Linux 2.6.30-2-686 uhci_hcd
[ 3.560849] usb usb5: SerialNumber: 0000:00:1d.3
[ 3.560950] usb usb5: configuration #1 chosen from 1 choice
[ 3.561008] hub 5-0:1.0: USB hub found
[ 3.561022] hub 5-0:1.0: 2 ports detected
[ 3.652522] libata version 3.00 loaded.
[ 3.669689] ide-gd driver 1.18
[ 3.669760] hda: max request size: 512KiB
[ 3.670710] hda: 78140160 sectors (40007 MB), CHS=16383/255/63
[ 3.671043] hda: cache flushes supported
[ 3.671142] hda: hda1 hda2 hda3
[ 3.860036] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 3.993857] usb 1-1: New USB device found, idVendor=174f, idProduct=a311
[ 3.993866] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.993872] usb 1-1: Product: USB2.0
[ 3.993877] usb 1-1: Manufacturer: Syntek
[ 3.994033] usb 1-1: configuration #1 chosen from 1 choice
[ 4.108060] usb 1-2: new high speed USB device using ehci_hcd and address 3
[ 4.369557] usb 1-2: New USB device found, idVendor=046d, idProduct=09c1
[ 4.369565] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.369733] usb 1-2: configuration #1 chosen from 1 choice
[ 4.407322] kjournald starting. Commit interval 5 seconds
[ 4.407346] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.596049] usb 1-6: new high speed USB device using ehci_hcd and address 6
[ 4.728833] usb 1-6: New USB device found, idVendor=0b05, idProduct=171b
[ 4.728842] usb 1-6: New USB device strings: Mfr=16, Product=32, SerialNumber=0
[ 4.728848] usb 1-6: Product: USB2.0 WLAN
[ 4.728853] usb 1-6: Manufacturer: ASUS
[ 4.729010] usb 1-6: configuration #1 chosen from 1 choice
[ 4.840025] usb 1-7: new high speed USB device using ehci_hcd and address 7
[ 4.972372] usb 1-7: New USB device found, idVendor=0424, idProduct=2502
[ 4.972380] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.972525] usb 1-7: configuration #1 chosen from 1 choice
[ 4.972675] hub 1-7:1.0: USB hub found
[ 4.972741] hub 1-7:1.0: 2 ports detected
[ 5.324040] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 5.499955] usb 3-1: New USB device found, idVendor=046d, idProduct=c016
[ 5.499963] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.499970] usb 3-1: Product: Optical USB Mouse
[ 5.499974] usb 3-1: Manufacturer: Logitech
[ 5.500147] usb 3-1: configuration #1 chosen from 1 choice
[ 5.740036] usb 3-2: new low speed USB device using uhci_hcd and address 3
[ 5.997019] usb 3-2: New USB device found, idVendor=04d9, idProduct=1606
[ 5.997027] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.997033] usb 3-2: Product: USB Keyboard
[ 5.997038] usb 3-2: Manufacturer:
[ 5.997200] usb 3-2: configuration #1 chosen from 1 choice
[ 6.244067] usb 5-2: new full speed USB device using uhci_hcd and address 2
[ 6.497490] usb 5-2: New USB device found, idVendor=0b05, idProduct=1712
[ 6.497499] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=3
[ 6.497505] usb 5-2: SerialNumber: 0194E8-5B-0002
[ 6.497664] usb 5-2: configuration #1 chosen from 1 choice
[ 6.588109] usb 1-7.1: new full speed USB device using ehci_hcd and address 9
[ 6.680990] usb 1-7.1: New USB device found, idVendor=08ff, idProduct=1600
[ 6.680998] usb 1-7.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 6.681004] usb 1-7.1: Product: Fingerprint Sensor
[ 6.681175] usb 1-7.1: configuration #1 chosen from 1 choice
[ 6.768155] usb 1-7.2: new low speed USB device using ehci_hcd and address 10
[ 6.865020] usb 1-7.2: New USB device found, idVendor=134c, idProduct=0005
[ 6.865029] usb 1-7.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.865035] usb 1-7.2: Product: PANJIT TouchSet Digitizer
[ 6.865040] usb 1-7.2: Manufacturer: PANJIT
[ 6.865201] usb 1-7.2: configuration #1 chosen from 1 choice
[ 7.227483] udev: starting version 150
[ 7.701391] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 7.701414] ACPI: Power Button [PWRB]
[ 7.701526] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 7.701539] ACPI: Sleep Button [SLPB]
[ 7.722683] ACPI: AC Adapter [AC0] (on-line)
[ 7.931477] Asus Laptop ACPI Extras version 0.30
[ 7.942846] Marking TSC unstable due to TSC halts in idle
[ 7.942973] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 7.943052] processor ACPI_CPU:00: registered as cooling_device0
[ 7.943066] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 7.949036] unsupported model R2H, trying default values
[ 7.949043] send /proc/acpi/dsdt to the developers
[ 7.988322] ACPI: Battery Slot [BAT0] (battery present)
[ 8.007221] asus-laptop: Asus Laptop Support version 0.42
[ 8.020316] asus-laptop: R2H model detected
[ 8.233848] usbcore: registered new interface driver hiddev
[ 8.247204] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input4
[ 8.247381] generic-usb 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.1-1/input0
[ 8.296829] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input5
[ 8.296980] generic-usb 0003:04D9:1606.0002: input,hidraw1: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:1d.1-2/input0
[ 8.388524] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.1/input/input6
[ 8.388680] generic-usb 0003:04D9:1606.0003: input,hidraw2: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:1d.1-2/input1
[ 8.394427] input: PANJIT PANJIT TouchSet Digitizer as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7.2/1-7.2:1.0/input/input7
[ 8.394657] generic-usb 0003:134C:0005.0004: input,hiddev96,hidraw3: USB HID v1.11 Mouse [PANJIT PANJIT TouchSet Digitizer] on usb-0000:00:1d.7-7.2/input0
[ 8.394698] usbcore: registered new interface driver usbhid
[ 8.394704] usbhid: v2.6:USB HID core driver
[ 8.415307] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 8.425648] input: Asus Laptop extra buttons as /devices/virtual/input/input9
[ 8.425764] Registered led device: asus::mail
[ 8.500035] Clocksource tsc unstable (delta = -198067169 ns)
[ 8.862538] Bluetooth: Core ver 2.15
[ 8.867309] NET: Registered protocol family 31
[ 8.867315] Bluetooth: HCI device and connection manager initialized
[ 8.867321] Bluetooth: HCI socket layer initialized
[ 8.930141] cfg80211: Using static regulatory domain info
[ 8.930148] cfg80211: Regulatory domain: US
[ 8.930152] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 8.930159] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 8.930166] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 8.930172] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 8.930179] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 8.930185] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 8.930191] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 8.930212] cfg80211: Calling CRDA for country: US
[ 9.047582] Linux video capture interface: v2.00
[ 9.051156] intel_rng: FWH not detected
[ 9.083391] input: PS/2 Generic Mouse as /devices/platform/i8042/serio3/input/input10
[ 9.252837] Bluetooth: Generic Bluetooth USB driver ver 0.5
[ 9.253003] usbcore: registered new interface driver btusb
[ 9.263178] stkwebcam: Syntek USB2.0 Camera is now controlling video device /dev/video0
[ 9.263227] usbcore: registered new interface driver stkwebcam
[ 9.273882] uvcvideo: Found UVC 1.00 device <unnamed> (046d:09c1)
[ 9.294043] input: UVC Camera (046d:09c1) as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/input/input11
[ 9.294179] usbcore: registered new interface driver uvcvideo
[ 9.294185] USB Video Class driver (v0.1.0)
[ 9.608051] usb 1-6: reset high speed USB device using ehci_hcd and address 6
[ 10.480103] phy0: Selected rate control algorithm 'minstrel'
[ 10.481371] zd1211rw 1-6:1.0: phy0
[ 10.481433] usbcore: registered new interface driver zd1211rw
[ 11.004941] usbcore: registered new interface driver snd-usb-audio
[ 11.072812] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 11.072879] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 11.500979] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input12
[ 12.106216] Adding 987988k swap on /dev/hda2. Priority:-1 extents:1 across:987988k
[ 12.465208] EXT3 FS on hda3, internal journal
[ 14.554415] r8169: eth0: link up
[ 14.554431] r8169: eth0: link up
[ 17.885968] fuse init (API version 7.11)
[ 24.920048] eth0: no IPv6 routers present
[ 40.359174] [drm] Initialized drm 1.1.0 20060810
[ 40.385230] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 40.385242] i915 0000:00:02.0: setting latency timer to 64
[ 40.488482] i2c-adapter i2c-1: unable to read EDID block.
[ 40.544124] i915 0000:00:02.0: LVDS-1: no EDID data
[ 40.847128] [drm] DAC-6: set mode 640x480 0
[ 41.024484] i2c-adapter i2c-1: unable to read EDID block.
[ 41.080116] i915 0000:00:02.0: LVDS-1: no EDID data
[ 41.121004] [drm] TV-11: set mode NTSC 480i 0
[ 41.248345] allocated 1024x768 fb: 0x00fdf000, bo f6bb3440
[ 41.248707] Console: switching to colour frame buffer device 100x30
[ 41.248722] fb0: inteldrmfb frame buffer device
[ 41.248727] registered panic notifier
[ 41.248740] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 41.314568] [drm] LVDS-8: set mode 800x480 13
[ 41.448480] i2c-adapter i2c-0: unable to read EDID block.
[ 41.504123] i915 0000:00:02.0: VGA-1: no EDID data
[ 41.608477] i2c-adapter i2c-0: unable to read EDID block.
[ 41.664122] i915 0000:00:02.0: VGA-1: no EDID data
[ 41.764479] i2c-adapter i2c-1: unable to read EDID block.
[ 41.820113] i915 0000:00:02.0: LVDS-1: no EDID data
[ 41.924480] i2c-adapter i2c-0: unable to read EDID block.
[ 41.980115] i915 0000:00:02.0: VGA-1: no EDID data
[ 42.084476] i2c-adapter i2c-0: unable to read EDID block.
[ 42.140122] i915 0000:00:02.0: VGA-1: no EDID data
[ 42.284483] i2c-adapter i2c-1: unable to read EDID block.
[ 42.340124] i915 0000:00:02.0: LVDS-1: no EDID data
[ 51.888482] i2c-adapter i2c-0: unable to read EDID block.
[ 51.952133] i915 0000:00:02.0: VGA-1: no EDID data
[ 52.056496] i2c-adapter i2c-0: unable to read EDID block.
[ 52.112116] i915 0000:00:02.0: VGA-1: no EDID data
[ 52.212488] i2c-adapter i2c-1: unable to read EDID block.
[ 52.268120] i915 0000:00:02.0: LVDS-1: no EDID data
[ 52.896463] [drm] LVDS-8: set mode 19
[ 66.152487] i2c-adapter i2c-0: unable to read EDID block.
[ 66.208139] i915 0000:00:02.0: VGA-1: no EDID data
[ 66.312487] i2c-adapter i2c-0: unable to read EDID block.
[ 66.368143] i915 0000:00:02.0: VGA-1: no EDID data
[ 66.468505] i2c-adapter i2c-1: unable to read EDID block.
[ 66.524144] i915 0000:00:02.0: LVDS-1: no EDID data
[ 102.172483] i2c-adapter i2c-0: unable to read EDID block.
[ 102.228124] i915 0000:00:02.0: VGA-1: no EDID data
[ 102.332498] i2c-adapter i2c-0: unable to read EDID block.
[ 102.388118] i915 0000:00:02.0: VGA-1: no EDID data
[ 102.488479] i2c-adapter i2c-1: unable to read EDID block.
[ 102.544122] i915 0000:00:02.0: LVDS-1: no EDID data
[ 122.348483] i2c-adapter i2c-0: unable to read EDID block.
[ 122.404124] i915 0000:00:02.0: VGA-1: no EDID data
[ 122.508478] i2c-adapter i2c-0: unable to read EDID block.
[ 122.564122] i915 0000:00:02.0: VGA-1: no EDID data
[ 122.664495] i2c-adapter i2c-1: unable to read EDID block.
[ 122.720123] i915 0000:00:02.0: LVDS-1: no EDID data
[ 128.168488] i2c-adapter i2c-0: unable to read EDID block.
[ 128.224124] i915 0000:00:02.0: VGA-1: no EDID data
[ 128.328477] i2c-adapter i2c-0: unable to read EDID block.
[ 128.384119] i915 0000:00:02.0: VGA-1: no EDID data
[ 128.484479] i2c-adapter i2c-1: unable to read EDID block.
[ 128.540122] i915 0000:00:02.0: LVDS-1: no EDID data
[ 132.464484] i2c-adapter i2c-0: unable to read EDID block.
[ 132.520123] i915 0000:00:02.0: VGA-1: no EDID data
[ 132.624477] i2c-adapter i2c-0: unable to read EDID block.
[ 132.680114] i915 0000:00:02.0: VGA-1: no EDID data
[ 132.780529] i2c-adapter i2c-1: unable to read EDID block.
[ 132.836115] i915 0000:00:02.0: LVDS-1: no EDID data
[ 160.992483] i2c-adapter i2c-0: unable to read EDID block.
[ 161.048124] i915 0000:00:02.0: VGA-1: no EDID data
[ 161.152478] i2c-adapter i2c-0: unable to read EDID block.
[ 161.208122] i915 0000:00:02.0: VGA-1: no EDID data
[ 161.308480] i2c-adapter i2c-1: unable to read EDID block.
[ 161.364118] i915 0000:00:02.0: LVDS-1: no EDID data
[ 161.710323] [drm] LVDS-8: set mode 1b
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-trunk-686 (Debian 2.6.32-5) (ben@decadent.org.uk) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Sun Jan 10 06:32:16 UTC 2010
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000004efc0000 (usable)
[ 0.000000] BIOS-e820: 000000004efc0000 - 000000004efcf000 (ACPI data)
[ 0.000000] BIOS-e820: 000000004efcf000 - 000000004f000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x4efc0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 040000000 mask FF0000000 write-back
[ 0.000000] 2 base 04F000000 mask FFF000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037000000 page 2M
[ 0.000000] 0037000000 - 00373fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[ 0.000000] RAMDISK: 375d1000 - 37fef14c
[ 0.000000] Allocated new RAMDISK: 00100000 - 00b1e14c
[ 0.000000] Move RAMDISK from 00000000375d1000 - 0000000037fef14b to 00100000 - 00b1e14b
[ 0.000000] ACPI: RSDP 000f7270 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 4efc0000 0003C (v01 _ASUS_ Notebook 03000716 MSFT 00000097)
[ 0.000000] ACPI: FACP 4efc0200 00081 (v02 A_M_I_ OEMFACP 03000716 MSFT 00000097)
[ 0.000000] ACPI: DSDT 4efc05b0 08B61 (v01 0AAAA 0AAAA000 00000000 INTL 02002026)
[ 0.000000] ACPI: FACS 4efcf000 00040
[ 0.000000] ACPI: APIC 4efc0390 00054 (v01 A_M_I_ OEMAPIC 03000716 MSFT 00000097)
[ 0.000000] ACPI: MCFG 4efc03f0 0003C (v01 A_M_I_ OEMMCFG 03000716 MSFT 00000097)
[ 0.000000] ACPI: SLIC 4efc0430 00176 (v01 _ASUS_ Notebook 03000716 MSFT 00000097)
[ 0.000000] ACPI: OEMB 4efcf040 00040 (v01 A_M_I_ AMI_OEM 03000716 MSFT 00000097)
[ 0.000000] ACPI: HPET 4efc9120 00038 (v01 A_M_I_ OEMHPET 03000716 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 379MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 0 - 373fe000
[ 0.000000] node 0 low ram: 00000000 - 373fe000
[ 0.000000] node 0 bootmap 00012000 - 00018e80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014a1334] TEXT DATA BSS ==> [0001000000 - 00014a1334]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [00014a2000 - 00014a8215] BRK ==> [00014a2000 - 00014a8215]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #7 [0000100000 - 0000b1e14c] NEW RAMDISK ==> [0000100000 - 0000b1e14c]
[ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0004efc0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0004efc0
[ 0.000000] On node 0 totalpages: 323407
[ 0.000000] free_area_init_node: node 0, pgdat c138edc0, node_mem_map c14aa200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 760 pages used for memmap
[ 0.000000] HighMem zone: 96458 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xf000eef3 base: 0xfed00000
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 4f000000 (gap: 4f000000:afd14000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2000000 s34072 r0 d23272 u4194304
[ 0.000000] pcpu-alloc: s34072 r0 d23272 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 320879
[ 0.000000] Kernel command line: BOOT_IMAGE=//vmlinuz-2.6.32-trunk-686 root=UUID=a8e85f6a-e579-47b1-9322-83d4ad9e59fe ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000373fe:0004efc0)
[ 0.000000] Memory: 1266620k/1294080k available (2414k kernel code, 26148k reserved, 1266k data, 368k init, 388872k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.000000] .init : 0xc1399000 - 0xc13f5000 ( 368 kB)
[ 0.000000] .data : 0xc125bb11 - 0xc1398560 (1266 kB)
[ 0.000000] .text : 0xc1000000 - 0xc125bb11 (2414 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 897.659 MHz processor.
[ 0.004011] Calibrating delay loop (skipped), value calculated using timer frequency.. 1795.31 BogoMIPS (lpj=3590636)
[ 0.004048] Security Framework initialized
[ 0.004061] SELinux: Disabled at boot.
[ 0.004074] Mount-cache hash table entries: 512
[ 0.004312] Initializing cgroup subsys ns
[ 0.004321] Initializing cgroup subsys cpuacct
[ 0.004329] Initializing cgroup subsys devices
[ 0.004334] Initializing cgroup subsys freezer
[ 0.004339] Initializing cgroup subsys net_cls
[ 0.008051] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008057] CPU: L2 cache: 512K
[ 0.008066] mce: CPU supports 5 MCE banks
[ 0.008083] CPU0: Thermal monitoring enabled (TM1)
[ 0.008101] Performance Events: p6 PMU driver.
[ 0.008113] ... version: 0
[ 0.008116] ... bit width: 32
[ 0.008120] ... generic registers: 2
[ 0.008124] ... value mask: 00000000ffffffff
[ 0.008129] ... max period: 000000007fffffff
[ 0.008133] ... fixed-purpose events: 0
[ 0.008137] ... event mask: 0000000000000003
[ 0.008144] Checking 'hlt' instruction... OK.
[ 0.024639] SMP alternatives: switching to UP code
[ 0.031694] Freeing SMP alternatives: 13k freed
[ 0.031709] ACPI: Core revision 20090903
[ 0.056602] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.097406] CPU0: Intel(R) Celeron(R) M processor 900MHz stepping 06
[ 0.100001] Brought up 1 CPUs
[ 0.100001] Total of 1 processors activated (1795.31 BogoMIPS).
[ 0.100001] CPU0 attaching NULL sched-domain.
[ 0.100001] devtmpfs: initialized
[ 0.100001] regulator: core version 0.5
[ 0.100001] NET: Registered protocol family 16
[ 0.100001] ACPI: bus type pci registered
[ 0.100001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.100001] PCI: Not using MMCONFIG.
[ 0.100001] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
[ 0.100001] PCI: Using configuration type 1 for base access
[ 0.100001] bio: create slab <bio-0> at 0
[ 0.100638] ACPI: EC: Look up EC in DSDT
[ 0.121987] ACPI: Interpreter enabled
[ 0.122021] ACPI: (supports S0 S3 S4 S5)
[ 0.122071] ACPI: Using IOAPIC for interrupt routing
[ 0.122193] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.127902] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.127908] PCI: Using MMCONFIG for extended config space
[ 0.141723] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.142200] ACPI: No dock devices found.
[ 0.142469] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.142611] pci 0000:00:02.0: reg 10 32bit mmio: [0xfeb80000-0xfebfffff]
[ 0.142623] pci 0000:00:02.0: reg 14 io port: [0xec00-0xec07]
[ 0.142632] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.142642] pci 0000:00:02.0: reg 1c 32bit mmio: [0xfeb40000-0xfeb7ffff]
[ 0.142693] pci 0000:00:02.1: reg 10 32bit mmio: [0xfea80000-0xfeafffff]
[ 0.142820] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfeb38000-0xfeb3bfff]
[ 0.142886] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.142894] pci 0000:00:1b.0: PME# disabled
[ 0.142992] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.142999] pci 0000:00:1c.0: PME# disabled
[ 0.143075] pci 0000:00:1d.0: reg 20 io port: [0xe400-0xe41f]
[ 0.143151] pci 0000:00:1d.1: reg 20 io port: [0xe480-0xe49f]
[ 0.143225] pci 0000:00:1d.2: reg 20 io port: [0xe800-0xe81f]
[ 0.143298] pci 0000:00:1d.3: reg 20 io port: [0xe880-0xe89f]
[ 0.143378] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfeb3fc00-0xfeb3ffff]
[ 0.143451] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.143459] pci 0000:00:1d.7: PME# disabled
[ 0.143622] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.143630] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.143640] pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 0250-025f
[ 0.143676] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.143688] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.143700] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.143712] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.143724] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
[ 0.143837] pci 0000:02:00.0: reg 10 io port: [0xd800-0xd8ff]
[ 0.143869] pci 0000:02:00.0: reg 18 64bit mmio: [0xfe8ff000-0xfe8fffff]
[ 0.143901] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfe8c0000-0xfe8dffff]
[ 0.143965] pci 0000:02:00.0: supports D1 D2
[ 0.143970] pci 0000:02:00.0: PME# supported from D1 D2 D3hot
[ 0.143979] pci 0000:02:00.0: PME# disabled
[ 0.144070] pci 0000:00:1c.0: bridge io port: [0xd000-0xdfff]
[ 0.144078] pci 0000:00:1c.0: bridge 32bit mmio: [0xfe800000-0xfe8fffff]
[ 0.144090] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xbfe00000-0xbfefffff]
[ 0.144149] pci 0000:01:01.0: reg 10 32bit mmio: [0xfe7ffc00-0xfe7ffcff]
[ 0.144217] pci 0000:01:01.0: supports D1 D2
[ 0.144222] pci 0000:01:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.144230] pci 0000:01:01.0: PME# disabled
[ 0.144303] pci 0000:00:1e.0: transparent bridge
[ 0.144314] pci 0000:00:1e.0: bridge 32bit mmio: [0xfe700000-0xfe7fffff]
[ 0.144338] pci_bus 0000:00: on NUMA node 0
[ 0.144353] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.144758] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.145005] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.154166] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12)
[ 0.154460] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 12)
[ 0.154746] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 12)
[ 0.155041] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 12)
[ 0.155331] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 12) *0, disabled.
[ 0.155620] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 12) *0, disabled.
[ 0.155908] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 12) *0, disabled.
[ 0.156211] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 12)
[ 0.156447] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.156463] vgaarb: loaded
[ 0.156615] PCI: Using ACPI for IRQ routing
[ 0.156877] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.156888] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.160022] Switching to clocksource tsc
[ 0.162743] pnp: PnP ACPI init
[ 0.162781] ACPI: bus type pnp registered
[ 0.168230] pnp: PnP ACPI: found 15 devices
[ 0.168236] ACPI: ACPI bus type pnp unregistered
[ 0.168245] PnPBIOS: Disabled by ACPI PNP
[ 0.168276] system 00:07: ioport range 0x680-0x68f has been reserved
[ 0.168290] system 00:08: ioport range 0x250-0x25f has been reserved
[ 0.168297] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.168304] system 00:08: ioport range 0x800-0x87f has been reserved
[ 0.168311] system 00:08: ioport range 0x400-0x41f has been reserved
[ 0.168319] system 00:08: ioport range 0x480-0x4bf has been reserved
[ 0.168328] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.168336] system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.168349] system 00:09: iomem range 0xfec00000-0xfecfffff could not be reserved
[ 0.168356] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.168375] system 00:0a: iomem range 0xffb80000-0xffbfffff has been reserved
[ 0.168383] system 00:0a: iomem range 0xfff80000-0xffffffff has been reserved
[ 0.168401] system 00:0b: iomem range 0xffc00000-0xfff7ffff has been reserved
[ 0.168414] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.168428] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 0.168436] system 00:0e: iomem range 0xc0000-0xcffff could not be reserved
[ 0.168443] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[ 0.168450] system 00:0e: iomem range 0x100000-0x4effffff could not be reserved
[ 0.203403] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.203411] pci 0000:00:1c.0: IO window: 0xd000-0xdfff
[ 0.203421] pci 0000:00:1c.0: MEM window: 0xfe800000-0xfe8fffff
[ 0.203430] pci 0000:00:1c.0: PREFETCH window: 0x000000bfe00000-0x000000bfefffff
[ 0.203442] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
[ 0.203446] pci 0000:00:1e.0: IO window: disabled
[ 0.203456] pci 0000:00:1e.0: MEM window: 0xfe700000-0xfe7fffff
[ 0.203463] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.203492] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.203501] pci 0000:00:1c.0: setting latency timer to 64
[ 0.203513] pci 0000:00:1e.0: setting latency timer to 64
[ 0.203522] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.203529] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.203535] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
[ 0.203542] pci_bus 0000:02: resource 1 mem: [0xfe800000-0xfe8fffff]
[ 0.203548] pci_bus 0000:02: resource 2 pref mem [0xbfe00000-0xbfefffff]
[ 0.203555] pci_bus 0000:01: resource 1 mem: [0xfe700000-0xfe7fffff]
[ 0.203561] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.203567] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
[ 0.203631] NET: Registered protocol family 2
[ 0.203796] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.204413] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.205951] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.206873] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.206880] TCP reno registered
[ 0.207095] NET: Registered protocol family 1
[ 0.207138] pci 0000:00:02.0: Boot video device
[ 0.207360] Unpacking initramfs...
[ 0.828111] Freeing initrd memory: 10360k freed
[ 0.841105] audit: initializing netlink socket (disabled)
[ 0.841132] type=2000 audit(1266491202.839:1): initialized
[ 0.841480] highmem bounce pool size: 64 pages
[ 0.841491] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.844592] VFS: Disk quotas dquot_6.5.2
[ 0.844722] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.844892] msgmni has been set to 1736
[ 0.845291] alg: No test for stdrng (krng)
[ 0.845410] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.845417] io scheduler noop registered
[ 0.845421] io scheduler anticipatory registered
[ 0.845425] io scheduler deadline registered
[ 0.845506] io scheduler cfq registered (default)
[ 0.845709] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.845725] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.846054] isapnp: Scanning for PnP cards...
[ 1.200313] isapnp: No Plug & Play device found
[ 1.203113] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.203249] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.203992] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.204315] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.206482] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 1.207544] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.207559] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.207613] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.207656] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.207699] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.207886] mice: PS/2 mouse device common for all mice
[ 1.207949] Driver 'rtc_cmos' needs updating - please use bus_type methods
[ 1.208025] rtc_cmos 00:02: RTC can wake from S4
[ 1.208105] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.208144] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 1.208174] cpuidle: using governor ladder
[ 1.208178] cpuidle: using governor menu
[ 1.208186] No iBFT detected.
[ 1.208898] TCP cubic registered
[ 1.209203] NET: Registered protocol family 10
[ 1.210091] lo: Disabled Privacy Extensions
[ 1.210738] Mobile IPv6
[ 1.210744] NET: Registered protocol family 17
[ 1.210777] Using IPI No-Shortcut mode
[ 1.210940] registered taskstats version 1
[ 1.211339] rtc_cmos 00:02: setting system clock to 2010-02-18 11:06:43 UTC (1266491203)
[ 1.211436] Freeing unused kernel memory: 368k freed
[ 1.211789] Write protecting the kernel text: 2416k
[ 1.211832] Write protecting the kernel read-only data: 872k
[ 1.241478] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.466468] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.466487] ACPI: Thermal Zone [THRM] (66 C)
[ 1.755219] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 1.755242] ACPI: Power Button [PWRB]
[ 1.755356] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 1.755368] ACPI: Sleep Button [SLPB]
[ 1.869354] Linux agpgart interface v0.103
[ 1.874029] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input3
[ 1.874048] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[ 1.926743] usbcore: registered new interface driver usbfs
[ 1.927001] usbcore: registered new interface driver hub
[ 1.927275] usbcore: registered new device driver usb
[ 1.935695] Uniform Multi-Platform E-IDE driver
[ 1.959427] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.959492] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.959528] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.959536] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.959583] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.959638] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.963537] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.963566] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfeb3fc00
[ 1.988629] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.988669] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.988730] r8169 0000:02:00.0: setting latency timer to 64
[ 1.988824] r8169 0000:02:00.0: irq 25 for MSI/MSI-X
[ 1.990158] eth0: RTL8101e at 0xf7dba000, 00:1b:fc:62:3c:59, XID 14000000 IRQ 25
[ 2.031669] sdhci: Secure Digital Host Controller Interface driver
[ 2.031676] sdhci: Copyright(c) Pierre Ossman
[ 2.035202] sdhci-pci 0000:01:01.0: SDHCI controller found [1180:0822] (rev 19)
[ 2.035241] sdhci-pci 0000:01:01.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.036291] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.036359] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.036365] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.036372] usb usb1: Product: EHCI Host Controller
[ 2.036377] usb usb1: Manufacturer: Linux 2.6.32-trunk-686 ehci_hcd
[ 2.036382] usb usb1: SerialNumber: 0000:00:1d.7
[ 2.036563] usb usb1: configuration #1 chosen from 1 choice
[ 2.036628] hub 1-0:1.0: USB hub found
[ 2.036644] hub 1-0:1.0: 8 ports detected
[ 2.037168] piix 0000:00:1f.1: IDE controller (0x8086:0x266f rev 0x04)
[ 2.037195] PIIX_IDE 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.037233] piix 0000:00:1f.1: not 100% native mode: will probe irqs later
[ 2.037245] ide0: BM-DMA at 0xffa0-0xffa7
[ 2.037258] ide1: BM-DMA at 0xffa8-0xffaf
[ 2.037267] Probing IDE interface ide0...
[ 2.048150] Registered led device: mmc0::
[ 2.049279] mmc0: SDHCI controller on PCI [0000:01:01.0] using PIO
[ 2.103010] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.324245] hda: HTC426040G8CE00, ATA DISK drive
[ 2.348026] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 2.481566] usb 1-1: New USB device found, idVendor=174f, idProduct=a311
[ 2.481575] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.481582] usb 1-1: Product: USB2.0
[ 2.481587] usb 1-1: Manufacturer: Syntek
[ 2.481758] usb 1-1: configuration #1 chosen from 1 choice
[ 2.592024] usb 1-2: new high speed USB device using ehci_hcd and address 3
[ 2.848380] usb 1-2: New USB device found, idVendor=046d, idProduct=09c1
[ 2.848388] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.849101] usb 1-2: configuration #1 chosen from 1 choice
[ 2.996107] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 2.996230] hda: UDMA/100 mode selected
[ 2.996338] Probing IDE interface ide1...
[ 3.072025] usb 1-6: new high speed USB device using ehci_hcd and address 6
[ 3.204761] usb 1-6: New USB device found, idVendor=0b05, idProduct=171b
[ 3.204769] usb 1-6: New USB device strings: Mfr=16, Product=32, SerialNumber=0
[ 3.204775] usb 1-6: Product: USB2.0 WLAN
[ 3.204779] usb 1-6: Manufacturer: ASUS
[ 3.205490] usb 1-6: configuration #1 chosen from 1 choice
[ 3.316023] usb 1-7: new high speed USB device using ehci_hcd and address 7
[ 3.448414] usb 1-7: New USB device found, idVendor=0424, idProduct=2502
[ 3.448422] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.449136] usb 1-7: configuration #1 chosen from 1 choice
[ 3.449385] hub 1-7:1.0: USB hub found
[ 3.449544] hub 1-7:1.0: 2 ports detected
[ 3.564124] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 3.617420] ide1 at 0x170-0x177,0x376 on irq 15
[ 3.658008] agpgart-intel 0000:00:00.0: Intel 915GM Chipset
[ 3.658448] agpgart-intel 0000:00:00.0: detected 16124K stolen memory
[ 3.663277] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 3.663339] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.663353] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.663361] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.663391] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.663434] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e400
[ 3.663510] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.663517] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.663523] usb usb2: Product: UHCI Host Controller
[ 3.663528] usb usb2: Manufacturer: Linux 2.6.32-trunk-686 uhci_hcd
[ 3.663533] usb usb2: SerialNumber: 0000:00:1d.0
[ 3.663708] usb usb2: configuration #1 chosen from 1 choice
[ 3.663776] hub 2-0:1.0: USB hub found
[ 3.663790] hub 2-0:1.0: 2 ports detected
[ 3.663895] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.663907] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.663914] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.663931] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 3.663979] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e480
[ 3.664085] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.664092] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.664098] usb usb3: Product: UHCI Host Controller
[ 3.664103] usb usb3: Manufacturer: Linux 2.6.32-trunk-686 uhci_hcd
[ 3.664108] usb usb3: SerialNumber: 0000:00:1d.1
[ 3.664255] usb usb3: configuration #1 chosen from 1 choice
[ 3.664315] hub 3-0:1.0: USB hub found
[ 3.664329] hub 3-0:1.0: 2 ports detected
[ 3.664420] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.664432] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.664439] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.664460] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 3.664508] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e800
[ 3.664570] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.664576] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.664582] usb usb4: Product: UHCI Host Controller
[ 3.664587] usb usb4: Manufacturer: Linux 2.6.32-trunk-686 uhci_hcd
[ 3.664592] usb usb4: SerialNumber: 0000:00:1d.2
[ 3.664730] usb usb4: configuration #1 chosen from 1 choice
[ 3.664790] hub 4-0:1.0: USB hub found
[ 3.664803] hub 4-0:1.0: 2 ports detected
[ 3.664892] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 3.664904] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 3.664911] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.664927] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 3.664973] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e880
[ 3.665035] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.665041] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.665047] usb usb5: Product: UHCI Host Controller
[ 3.665052] usb usb5: Manufacturer: Linux 2.6.32-trunk-686 uhci_hcd
[ 3.665057] usb usb5: SerialNumber: 0000:00:1d.3
[ 3.665209] usb usb5: configuration #1 chosen from 1 choice
[ 3.665273] hub 5-0:1.0: USB hub found
[ 3.665288] hub 5-0:1.0: 2 ports detected
[ 3.669858] SCSI subsystem initialized
[ 3.739689] libata version 3.00 loaded.
[ 3.758360] ide-gd driver 1.18
[ 3.758424] hda: max request size: 512KiB
[ 3.758613] hda: 78140160 sectors (40007 MB), CHS=16383/255/63
[ 3.758912] hda: cache flushes supported
[ 3.759015] hda: hda1 hda2 hda3
[ 3.776483] usb 1-7.1: new full speed USB device using ehci_hcd and address 9
[ 3.884839] usb 1-7.1: New USB device found, idVendor=08ff, idProduct=1600
[ 3.884848] usb 1-7.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.884854] usb 1-7.1: Product: Fingerprint Sensor
[ 3.885056] usb 1-7.1: configuration #1 chosen from 1 choice
[ 3.972120] usb 1-7.2: new low speed USB device using ehci_hcd and address 10
[ 4.068994] usb 1-7.2: New USB device found, idVendor=134c, idProduct=0005
[ 4.069003] usb 1-7.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.069009] usb 1-7.2: Product: PANJIT TouchSet Digitizer
[ 4.069014] usb 1-7.2: Manufacturer: PANJIT
[ 4.069216] usb 1-7.2: configuration #1 chosen from 1 choice
[ 4.120992] usbcore: registered new interface driver hiddev
[ 4.126269] input: PANJIT PANJIT TouchSet Digitizer as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7.2/1-7.2:1.0/input/input4
[ 4.126523] generic-usb 0003:134C:0005.0001: input,hiddev96,hidraw0: USB HID v1.11 Mouse [PANJIT PANJIT TouchSet Digitizer] on usb-0000:00:1d.7-7.2/input0
[ 4.126571] usbcore: registered new interface driver usbhid
[ 4.126579] usbhid: v2.6:USB HID core driver
[ 4.180070] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 4.367149] usb 3-1: New USB device found, idVendor=046d, idProduct=c016
[ 4.367158] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.367164] usb 3-1: Product: Optical USB Mouse
[ 4.367169] usb 3-1: Manufacturer: Logitech
[ 4.367357] usb 3-1: configuration #1 chosen from 1 choice
[ 4.384112] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input5
[ 4.384440] generic-usb 0003:046D:C016.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.1-1/input0
[ 4.445829] kjournald starting. Commit interval 5 seconds
[ 4.445851] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.496067] usb 3-2: new low speed USB device using uhci_hcd and address 3
[ 4.752193] usb 3-2: New USB device found, idVendor=04d9, idProduct=1606
[ 4.752201] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.752208] usb 3-2: Product: USB Keyboard
[ 4.752212] usb 3-2: Manufacturer:
[ 4.752419] usb 3-2: configuration #1 chosen from 1 choice
[ 4.804123] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input6
[ 4.804239] generic-usb 0003:04D9:1606.0003: input,hidraw2: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:1d.1-2/input0
[ 4.891401] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.1/input/input7
[ 4.891504] generic-usb 0003:04D9:1606.0004: input,hidraw3: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:1d.1-2/input1
[ 5.000033] usb 5-2: new full speed USB device using uhci_hcd and address 2
[ 5.254200] usb 5-2: New USB device found, idVendor=0b05, idProduct=1712
[ 5.254209] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=3
[ 5.254215] usb 5-2: SerialNumber: 0194E8-5B-0002
[ 5.254398] usb 5-2: configuration #1 chosen from 1 choice
[ 7.343134] udev: starting version 150
[ 7.873333] Marking TSC unstable due to TSC halts in idle
[ 7.887577] Switching to clocksource hpet
[ 7.891366] processor LNXCPU:00: registered as cooling_device0
[ 7.948399] ACPI: AC Adapter [AC0] (on-line)
[ 8.055439] ACPI: Battery Slot [BAT0] (battery present)
[ 8.150362] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 8.690665] Asus Laptop ACPI Extras version 0.30
[ 8.769845] unsupported model R2H, trying default values
[ 8.769887] send /proc/acpi/dsdt to the developers
[ 8.869694] asus_laptop: Asus Laptop Support version 0.42
[ 8.879952] asus_laptop: R2H model detected
[ 9.080427] intel_rng: FWH not detected
[ 9.249741] Linux video capture interface: v2.00
[ 9.289590] input: Asus Laptop extra buttons as /devices/virtual/input/input9
[ 9.289806] Registered led device: asus::mail
[ 9.399581] cfg80211: Using static regulatory domain info
[ 9.399588] cfg80211: Regulatory domain: US
[ 9.399592] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 9.399599] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 9.399607] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 9.399614] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 9.399620] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 9.399626] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 9.399633] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 9.400050] cfg80211: Calling CRDA for country: US
[ 9.965709] uvcvideo: Found UVC 1.00 device <unnamed> (046d:09c1)
[ 10.002153] input: UVC Camera (046d:09c1) as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/input/input10
[ 10.002307] usbcore: registered new interface driver uvcvideo
[ 10.002316] USB Video Class driver (v0.1.0)
[ 10.011692] Bluetooth: Core ver 2.15
[ 10.012055] NET: Registered protocol family 31
[ 10.012060] Bluetooth: HCI device and connection manager initialized
[ 10.012066] Bluetooth: HCI socket layer initialized
[ 10.016655] stkwebcam: Syntek USB2.0 Camera is now controlling video device /dev/video1
[ 10.016729] usbcore: registered new interface driver stkwebcam
[ 10.088063] usb 1-6: reset high speed USB device using ehci_hcd and address 6
[ 10.498678] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 10.499214] usbcore: registered new interface driver btusb
[ 10.614401] usbcore: registered new interface driver snd-usb-audio
[ 10.815963] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 10.816108] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 10.921222] phy0: Selected rate control algorithm 'minstrel'
[ 10.922514] zd1211rw 1-6:1.0: phy0
[ 10.922597] usbcore: registered new interface driver zd1211rw
[ 11.417015] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
[ 12.130258] Adding 987988k swap on /dev/hda2. Priority:-1 extents:1 across:987988k
[ 12.482472] EXT3 FS on hda3, internal journal
[ 14.449967] r8169: eth0: link up
[ 14.449978] r8169: eth0: link up
[ 16.513141] fuse init (API version 7.13)
[ 24.716031] eth0: no IPv6 routers present
X.Org X Server 1.7.4
Release Date: 2010-01-08
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-trunk-686 i686 Debian
Current Operating System: Linux sparkles 2.6.30-2-686 #1 SMP Fri Dec 4 00:53:20 UTC 2009 i686
Kernel command line: BOOT_IMAGE=//vmlinuz-2.6.30-2-686 root=UUID=a8e85f6a-e579-47b1-9322-83d4ad9e59fe ro quiet splash
Build Date: 20 January 2010 10:52:55PM
xorg-server 2:1.7.4-2 (bgoglin@debian.org)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 18 11:57:28 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "main"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Configured Monitor"
(**) | |-->Device "Configured Video Device"
(**) |-->Input Device "touchscreen"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core keyboard device.
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x81e7680
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:0:2:0) 8086:2592:1043:12f7 Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 4, Mem @ 0xfeb80000/524288, 0xd0000000/268435456, 0xfeb40000/262144, I/O @ 0x0000ec00/8
(--) PCI: (0:0:2:1) 8086:2792:1043:12f7 Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 4, Mem @ 0xfea80000/524288
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 2.9.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "evtouch"
(II) Loading /usr/lib/xorg/modules/input/evtouch_drv.so
(II) Module evtouch: vendor="Kenan Esau"
compiled for 1.7.4, module version = 0.8.8
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) Primary Device is: PCI 00@00:02:0
(WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(**) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 915GM
(--) intel(0): Chipset: "915GM"
(II) intel(0): Output VGA1 using monitor section Configured Monitor
(II) intel(0): Output LVDS1 has no monitor section
(II) intel(0): found backlight control interface /sys/class/backlight/asus-laptop
(II) intel(0): Output TV1 using monitor section TV1
(**) intel(0): Option "Ignore" "True"
(II) intel(0): EDID for output VGA1
(II) intel(0): Not using default mode "640x350" (vrefresh out of range)
(II) intel(0): Not using default mode "320x175" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x400" (vrefresh out of range)
(II) intel(0): Not using default mode "320x200" (doublescan mode not supported)
(II) intel(0): Not using default mode "720x400" (vrefresh out of range)
(II) intel(0): Not using default mode "360x200" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (interlace mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x960" (hsync out of range)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x960" (vrefresh out of range)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (hsync out of range)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (hsync out of range)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1792x1344" (hsync out of range)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "1792x1344" (vrefresh out of range)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "1856x1392" (hsync out of range)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "1856x1392" (vrefresh out of range)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (hsync out of range)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (vrefresh out of range)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "832x624" (vrefresh out of range)
(II) intel(0): Not using default mode "416x312" (doublescan mode not supported)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (hsync out of range)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1440x900" (hsync out of range)
(II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1024" (hsync out of range)
(II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (hsync out of range)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (hsync out of range)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1080" (hsync out of range)
(II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1200" (hsync out of range)
(II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (vrefresh out of range)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (hsync out of range)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Printing probed modes for output VGA1
(II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
(II) intel(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): EDID for output LVDS1
(II) intel(0): Not using default mode "320x175" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x200" (doublescan mode not supported)
(II) intel(0): Not using default mode "360x200" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (exceeds panel dimensions)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (exceeds panel dimensions)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (exceeds panel dimensions)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (exceeds panel dimensions)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (exceeds panel dimensions)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (interlace mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "832x624" (exceeds panel dimensions)
(II) intel(0): Not using default mode "416x312" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1360x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1440x900" (exceeds panel dimensions)
(II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1080" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1200" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Printing probed modes for output LVDS1
(II) intel(0): Modeline "800x480"x59.7 27.00 800 808 904 905 480 482 484 500 (29.8 kHz)
(II) intel(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz)
(II) intel(0): Output VGA1 disconnected
(II) intel(0): Output LVDS1 connected
(II) intel(0): Using user preference for initial modes
(II) intel(0): Output LVDS1 using initial mode 800x480
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) Depth 24 pixmap format is 32 bpp
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Kernel mode setting active, disabling FBC.
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): No memory allocations
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(**) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): direct rendering: DRI2 Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
record: RECORD extension enabled at configure time.
record: This extension is known to be broken, disabling extension now..
record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 211 x 126
State: S_UNTOUCHED Action: No Action Button: 0
State: S_TOUCHED Action: No Action Button: 0
State: S_LONGTOUCHED Action: down Button: 1
State: S_MOVING Action: No Action Button: 0
State: S_MAYBETAPPED Action: click Button: 1
State: S_ONEANDAHALFTAP Action: down Button: 3
(**) Option "MinX" "122"
(**) Option "MaxX" "3983"
(**) Option "MinY" "152"
(**) Option "MaxY" "3872"
(**) Option "Emulate3Buttons" "True"
(**) Option "Emulate3Timeout" "50"
(**) Option "x0" "-2"
(**) Option "y0" "-6"
(**) Option "x1" "-2"
(**) Option "y1" "-6"
(**) Option "x2" "-2"
(**) Option "y2" "-6"
(**) Option "x3" "-1"
(**) Option "y3" "9"
(**) Option "x4" "-5"
(**) Option "y4" "9"
(**) Option "x5" "-5"
(**) Option "y5" "9"
(**) Option "x6" "-1"
(**) Option "y6" "0"
(**) Option "x7" "1"
(**) Option "y7" "0"
(**) Option "x8" "-4"
(**) Option "y8" "0"
(**) Option "DeviceName" "touchscreen"
(**) Option "SendCoreEvents" "On"
(**) Option "CorePointer"
(**) touchscreen: always reports core events
(II) XINPUT: Adding extended input device "touchscreen" (type: TOUCHSCREEN)
(**) touchscreen: (accel) keeping acceleration scheme 1
(**) touchscreen: (accel) acceleration profile 0
(**) Option "Device" "/dev/input/event7"
(II) touchscreen: Found relative axes
(II) touchscreen: Found absolute axes
(II) config/udev: Adding input device "Video Bus" (/dev/input/event1)
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) "Video Bus": always reports core events
(**) "Video Bus": Device: "/dev/input/event1"
(II) "Video Bus": Found keys
(II) "Video Bus": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Video Bus"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device "Power Button" (/dev/input/event2)
(**) "Power Button": always reports core events
(**) "Power Button": Device: "/dev/input/event2"
(II) "Power Button": Found keys
(II) "Power Button": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Power Button"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device "Sleep Button" (/dev/input/event3)
(**) "Sleep Button": always reports core events
(**) "Sleep Button": Device: "/dev/input/event3"
(II) "Sleep Button": Found keys
(II) "Sleep Button": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Sleep Button"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device "Logitech Optical USB Mouse" (/dev/input/event4)
(**) "Logitech Optical USB Mouse": always reports core events
(**) "Logitech Optical USB Mouse": Device: "/dev/input/event4"
(II) "Logitech Optical USB Mouse": Found 3 mouse buttons
(II) "Logitech Optical USB Mouse": Found scroll wheel(s)
(II) "Logitech Optical USB Mouse": Found relative axes
(II) "Logitech Optical USB Mouse": Found x and y relative axes
(II) "Logitech Optical USB Mouse": Configuring as mouse
(**) "Logitech Optical USB Mouse": YAxisMapping: buttons 4 and 5
(**) "Logitech Optical USB Mouse": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""Logitech Optical USB Mouse"" (type: MOUSE)
(**) "Logitech Optical USB Mouse": (accel) keeping acceleration scheme 1
(**) "Logitech Optical USB Mouse": (accel) acceleration profile 0
(II) "Logitech Optical USB Mouse": initialized for relative axes.
(II) config/udev: Adding input device "Logitech Optical USB Mouse" (/dev/input/mouse0)
(**) "Logitech Optical USB Mouse": always reports core events
(**) "Logitech Optical USB Mouse": Device: "/dev/input/mouse0"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""Logitech Optical USB Mouse""
(II) config/udev: Adding input device " USB Keyboard" (/dev/input/event5)
(**) " USB Keyboard": always reports core events
(**) " USB Keyboard": Device: "/dev/input/event5"
(II) " USB Keyboard": Found keys
(II) " USB Keyboard": Configuring as keyboard
(II) XINPUT: Adding extended input device "" USB Keyboard"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device " USB Keyboard" (/dev/input/event6)
(**) " USB Keyboard": always reports core events
(**) " USB Keyboard": Device: "/dev/input/event6"
(II) " USB Keyboard": Found keys
(II) " USB Keyboard": Configuring as keyboard
(II) XINPUT: Adding extended input device "" USB Keyboard"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device "UVC Camera (046d:09c1)" (/dev/input/event11)
(**) "UVC Camera (046d:09c1)": always reports core events
(**) "UVC Camera (046d:09c1)": Device: "/dev/input/event11"
(II) "UVC Camera (046d:09c1)": Found keys
(II) "UVC Camera (046d:09c1)": Configuring as keyboard
(II) XINPUT: Adding extended input device ""UVC Camera (046d:09c1)"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device "AT Translated Set 2 keyboard" (/dev/input/event0)
(**) "AT Translated Set 2 keyboard": always reports core events
(**) "AT Translated Set 2 keyboard": Device: "/dev/input/event0"
(II) "AT Translated Set 2 keyboard": Found keys
(II) "AT Translated Set 2 keyboard": Configuring as keyboard
(II) XINPUT: Adding extended input device ""AT Translated Set 2 keyboard"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device "PS/2 Generic Mouse" (/dev/input/event10)
(**) "PS/2 Generic Mouse": always reports core events
(**) "PS/2 Generic Mouse": Device: "/dev/input/event10"
(II) "PS/2 Generic Mouse": Found 3 mouse buttons
(II) "PS/2 Generic Mouse": Found relative axes
(II) "PS/2 Generic Mouse": Found x and y relative axes
(II) "PS/2 Generic Mouse": Configuring as mouse
(**) "PS/2 Generic Mouse": YAxisMapping: buttons 4 and 5
(**) "PS/2 Generic Mouse": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""PS/2 Generic Mouse"" (type: MOUSE)
(**) "PS/2 Generic Mouse": (accel) keeping acceleration scheme 1
(**) "PS/2 Generic Mouse": (accel) acceleration profile 0
(II) "PS/2 Generic Mouse": initialized for relative axes.
(II) config/udev: Adding input device "PS/2 Generic Mouse" (/dev/input/mouse2)
(**) "PS/2 Generic Mouse": always reports core events
(**) "PS/2 Generic Mouse": Device: "/dev/input/mouse2"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""PS/2 Generic Mouse""
(II) config/udev: Adding input device "Asus Laptop extra buttons" (/dev/input/event9)
(**) "Asus Laptop extra buttons": always reports core events
(**) "Asus Laptop extra buttons": Device: "/dev/input/event9"
(II) "Asus Laptop extra buttons": Found keys
(II) "Asus Laptop extra buttons": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Asus Laptop extra buttons"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) intel(0): Allocate new frame buffer 640x480 stride 1024
(II) intel(0): Allocate new frame buffer 800x480 stride 1024
X.Org X Server 1.7.4
Release Date: 2010-01-08
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-trunk-686 i686 Debian
Current Operating System: Linux sparkles 2.6.32-trunk-686 #1 SMP Sun Jan 10 06:32:16 UTC 2010 i686
Kernel command line: BOOT_IMAGE=//vmlinuz-2.6.32-trunk-686 root=UUID=a8e85f6a-e579-47b1-9322-83d4ad9e59fe ro quiet splash
Build Date: 20 January 2010 10:52:55PM
xorg-server 2:1.7.4-2 (bgoglin@debian.org)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 18 12:11:24 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "main"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Configured Monitor"
(**) | |-->Device "Configured Video Device"
(**) |-->Input Device "touchscreen"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core keyboard device.
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x81e7680
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:0:2:0) 8086:2592:1043:12f7 Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 4, Mem @ 0xfeb80000/524288, 0xd0000000/268435456, 0xfeb40000/262144, I/O @ 0x0000ec00/8
(--) PCI: (0:0:2:1) 8086:2792:1043:12f7 Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 4, Mem @ 0xfea80000/524288
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 2.9.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "evtouch"
(II) Loading /usr/lib/xorg/modules/input/evtouch_drv.so
(II) Module evtouch: vendor="Kenan Esau"
compiled for 1.7.4, module version = 0.8.8
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) Primary Device is: PCI 00@00:02:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(**) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 915GM
(--) intel(0): Chipset: "915GM"
(II) intel(0): Output VGA1 using monitor section Configured Monitor
(II) intel(0): Output TV1 using monitor section TV1
(**) intel(0): Option "Ignore" "True"
(II) intel(0): EDID for output VGA1
(II) intel(0): Manufacturer: SAM Model: 1e56 Serial#: 1129197879
(II) intel(0): Year: 2002 Week: 10
(II) intel(0): EDID Version: 1.2
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) intel(0): Sync: Separate Composite SyncOnGreenSerration on. V.Sync Pulse req. if CompSync or SyncOnGreen
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 27
(II) intel(0): Gamma: 2.40
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.634 redY: 0.354 greenX: 0.304 greenY: 0.581
(II) intel(0): blueX: 0.143 blueY: 0.102 whiteX: 0.318 whiteY: 0.339
(II) intel(0): Supported established timings:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x864@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported standard timings:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1024 vsize 768 refresh: 60 vid: 16481
(II) intel(0): #2: hsize: 800 vsize 600 refresh: 60 vid: 16453
(II) intel(0): #3: hsize: 640 vsize 480 refresh: 60 vid: 16433
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 270 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Ranges: V min: 56 V max: 85 Hz, H min: 30 H max: 81 kHz, PixClock max 130 MHz
(II) intel(0): Monitor name: 170T Analog
(II) intel(0): Serial No: H4JT302421
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff004c2d561e37314e43
(II) intel(0): 0a0c01020f221b8cea6f8ba25a4d9424
(II) intel(0): 1a5156bfef8081806140454031400101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520e1100001e000000fd0038551e
(II) intel(0): 510d000a202020202020000000fc0031
(II) intel(0): 37305420416e616c6f670a20000000ff
(II) intel(0): 0048344a543330323432310a202000e9
(II) intel(0): EDID vendor "SAM", prod id 7766
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Not using mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) intel(0): Printing probed modes for output VGA1
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Output VGA1 connected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output VGA1 using initial mode 1280x1024
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(==) intel(0): video overlay key set to 0x101fe
(**) intel(0): Display dimensions: (340, 270) mm
(**) intel(0): DPI set to (95, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) Depth 24 pixmap format is 32 bpp
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Kernel mode setting active, disabling FBC.
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): No memory allocations
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(**) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): direct rendering: DRI2 Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
record: RECORD extension enabled at configure time.
record: This extension is known to be broken, disabling extension now..
record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 338 x 270
State: S_UNTOUCHED Action: No Action Button: 0
State: S_TOUCHED Action: No Action Button: 0
State: S_LONGTOUCHED Action: down Button: 1
State: S_MOVING Action: No Action Button: 0
State: S_MAYBETAPPED Action: click Button: 1
State: S_ONEANDAHALFTAP Action: down Button: 3
(**) Option "MinX" "122"
(**) Option "MaxX" "3983"
(**) Option "MinY" "152"
(**) Option "MaxY" "3872"
(**) Option "Emulate3Buttons" "True"
(**) Option "Emulate3Timeout" "50"
(**) Option "x0" "-2"
(**) Option "y0" "-6"
(**) Option "x1" "-2"
(**) Option "y1" "-6"
(**) Option "x2" "-2"
(**) Option "y2" "-6"
(**) Option "x3" "-1"
(**) Option "y3" "9"
(**) Option "x4" "-5"
(**) Option "y4" "9"
(**) Option "x5" "-5"
(**) Option "y5" "9"
(**) Option "x6" "-1"
(**) Option "y6" "0"
(**) Option "x7" "1"
(**) Option "y7" "0"
(**) Option "x8" "-4"
(**) Option "y8" "0"
(**) Option "DeviceName" "touchscreen"
(**) Option "SendCoreEvents" "On"
(**) Option "CorePointer"
(**) touchscreen: always reports core events
(II) XINPUT: Adding extended input device "touchscreen" (type: TOUCHSCREEN)
(**) touchscreen: (accel) keeping acceleration scheme 1
(**) touchscreen: (accel) acceleration profile 0
(**) Option "Device" "/dev/input/event4"
(II) touchscreen: Found relative axes
(II) touchscreen: Found absolute axes
(II) config/udev: Adding input device "Video Bus" (/dev/input/event3)
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) "Video Bus": always reports core events
(**) "Video Bus": Device: "/dev/input/event3"
(II) "Video Bus": Found keys
(II) "Video Bus": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Video Bus"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device "Power Button" (/dev/input/event1)
(**) "Power Button": always reports core events
(**) "Power Button": Device: "/dev/input/event1"
(II) "Power Button": Found keys
(II) "Power Button": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Power Button"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device "Sleep Button" (/dev/input/event2)
(**) "Sleep Button": always reports core events
(**) "Sleep Button": Device: "/dev/input/event2"
(II) "Sleep Button": Found keys
(II) "Sleep Button": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Sleep Button"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device "Logitech Optical USB Mouse" (/dev/input/event5)
(**) "Logitech Optical USB Mouse": always reports core events
(**) "Logitech Optical USB Mouse": Device: "/dev/input/event5"
(II) "Logitech Optical USB Mouse": Found 3 mouse buttons
(II) "Logitech Optical USB Mouse": Found scroll wheel(s)
(II) "Logitech Optical USB Mouse": Found relative axes
(II) "Logitech Optical USB Mouse": Found x and y relative axes
(II) "Logitech Optical USB Mouse": Configuring as mouse
(**) "Logitech Optical USB Mouse": YAxisMapping: buttons 4 and 5
(**) "Logitech Optical USB Mouse": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""Logitech Optical USB Mouse"" (type: MOUSE)
(**) "Logitech Optical USB Mouse": (accel) keeping acceleration scheme 1
(**) "Logitech Optical USB Mouse": (accel) acceleration profile 0
(II) "Logitech Optical USB Mouse": initialized for relative axes.
(II) config/udev: Adding input device "Logitech Optical USB Mouse" (/dev/input/mouse1)
(**) "Logitech Optical USB Mouse": always reports core events
(**) "Logitech Optical USB Mouse": Device: "/dev/input/mouse1"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""Logitech Optical USB Mouse""
(II) config/udev: Adding input device " USB Keyboard" (/dev/input/event6)
(**) " USB Keyboard": always reports core events
(**) " USB Keyboard": Device: "/dev/input/event6"
(II) " USB Keyboard": Found keys
(II) " USB Keyboard": Configuring as keyboard
(II) XINPUT: Adding extended input device "" USB Keyboard"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device " USB Keyboard" (/dev/input/event7)
(**) " USB Keyboard": always reports core events
(**) " USB Keyboard": Device: "/dev/input/event7"
(II) " USB Keyboard": Found keys
(II) " USB Keyboard": Configuring as keyboard
(II) XINPUT: Adding extended input device "" USB Keyboard"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device "UVC Camera (046d:09c1)" (/dev/input/event10)
(**) "UVC Camera (046d:09c1)": always reports core events
(**) "UVC Camera (046d:09c1)": Device: "/dev/input/event10"
(II) "UVC Camera (046d:09c1)": Found keys
(II) "UVC Camera (046d:09c1)": Configuring as keyboard
(II) XINPUT: Adding extended input device ""UVC Camera (046d:09c1)"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device "AT Translated Set 2 keyboard" (/dev/input/event0)
(**) "AT Translated Set 2 keyboard": always reports core events
(**) "AT Translated Set 2 keyboard": Device: "/dev/input/event0"
(II) "AT Translated Set 2 keyboard": Found keys
(II) "AT Translated Set 2 keyboard": Configuring as keyboard
(II) XINPUT: Adding extended input device ""AT Translated Set 2 keyboard"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device "Asus Laptop extra buttons" (/dev/input/event9)
(**) "Asus Laptop extra buttons": always reports core events
(**) "Asus Laptop extra buttons": Device: "/dev/input/event9"
(II) "Asus Laptop extra buttons": Found keys
(II) "Asus Laptop extra buttons": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Asus Laptop extra buttons"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) intel(0): EDID vendor "SAM", prod id 7766
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Allocate new frame buffer 640x480 stride 1024
(II) config/udev: Adding input device "PS/2 Generic Mouse" (/dev/input/mouse2)
(**) "PS/2 Generic Mouse": always reports core events
(**) "PS/2 Generic Mouse": Device: "/dev/input/mouse2"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""PS/2 Generic Mouse""
(II) config/udev: Adding input device "PS/2 Generic Mouse" (/dev/input/event12)
(**) "PS/2 Generic Mouse": always reports core events
(**) "PS/2 Generic Mouse": Device: "/dev/input/event12"
(II) "PS/2 Generic Mouse": Found 3 mouse buttons
(II) "PS/2 Generic Mouse": Found relative axes
(II) "PS/2 Generic Mouse": Found x and y relative axes
(II) "PS/2 Generic Mouse": Configuring as mouse
(**) "PS/2 Generic Mouse": YAxisMapping: buttons 4 and 5
(**) "PS/2 Generic Mouse": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""PS/2 Generic Mouse"" (type: MOUSE)
(**) "PS/2 Generic Mouse": (accel) keeping acceleration scheme 1
(**) "PS/2 Generic Mouse": (accel) acceleration profile 0
(II) "PS/2 Generic Mouse": initialized for relative axes.
(II) intel(0): EDID vendor "SAM", prod id 7766
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
Screen 0: minimum 320 x 200, current 640 x 480, maximum 2048 x 2048
VGA1 unknown connection (normal left inverted right x axis y axis)
1360x768 59.8
1152x864 60.0
1024x768 60.0
800x600 60.3
640x480 59.9
LVDS1 connected 640x480+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
800x480 59.7 +
640x480 85.0* 72.8 75.0 59.9
720x400 85.0
640x400 85.1
640x350 85.1
Screen 0: minimum 320 x 200, current 640 x 480, maximum 4096 x 4096
VGA1 connected 640x480+0+0 (normal left inverted right x axis y axis) 338mm x 270mm
1280x1024 60.0 +
1152x864 75.0
1024x768 75.1 70.1 60.0
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 72.8* 75.0 66.7 60.0 59.9
720x400 70.1
--- End Message ---