Bug#596924: orion5x kernel 2.6.32-21 fails to detect network link on Linkstation Pro
Package: linux-image-2.6.32-5-orion5x
Version: 2.6.32-21
Severity: important
Hi,
Today I performed a network-console install of Squeeze on my Linkstation
Pro, using a recent d-i from p.d.o/~joeyh. The installation completed
successfully. Afterwards the system appeared to boot, but did not
respond to ping. I attached the hard drive to another machine and
discovered from the saved dmesg that the network device never entered
the "link up" state. This appears to be a regression in 2.6.32-21 since
the 2.6.32-20 kernel included in the installer works correctly.
I'm attaching /var/log/dmesg from the not-working kernel. Please let me
know if I can supply any additional information.
thanks,
Ryan
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-orion5x (Debian 2.6.32-21) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-2) ) #1 Thu Aug 26 08:07:14 UTC 2010
[ 0.000000] CPU: Feroceon [41069260] revision 0 (ARMv5TEJ), cr=a0053177
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] Machine: Buffalo Linkstation Pro/Live
[ 0.000000] Clearing invalid memory bank 0KB@0xffffffff
[ 0.000000] Clearing invalid memory bank 0KB@0xffffffff
[ 0.000000] Clearing invalid memory bank 0KB@0xffffffff
[ 0.000000] Ignoring unrecognised tag 0x00000000
[ 0.000000] Ignoring unrecognised tag 0x00000000
[ 0.000000] Ignoring unrecognised tag 0x00000000
[ 0.000000] Ignoring unrecognised tag 0x41000403
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 32768
[ 0.000000] free_area_init_node: node 0, pgdat c038a218, node_mem_map c03f3000
[ 0.000000] Normal zone: 256 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 32512 pages, LIFO batch:7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: root=/dev/sda2 ro
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 128MB = 128MB total
[ 0.000000] Memory: 123432KB available (3220K code, 573K data, 128K init, 0K highmem)
[ 0.000000] SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:64
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty0] enabled
[ 25.770741] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
[ 26.009983] Security Framework initialized
[ 26.010059] SELinux: Disabled at boot.
[ 26.010150] Mount-cache hash table entries: 512
[ 26.010878] Initializing cgroup subsys ns
[ 26.010950] Initializing cgroup subsys cpuacct
[ 26.011012] Initializing cgroup subsys devices
[ 26.011073] Initializing cgroup subsys freezer
[ 26.011132] Initializing cgroup subsys net_cls
[ 26.011267] CPU: Testing write buffer coherency: ok
[ 26.012922] devtmpfs: initialized
[ 26.016398] regulator: core version 0.5
[ 26.016910] NET: Registered protocol family 16
[ 26.018144] Orion ID: MV88F5182-A2. TCLK=166666667.
[ 26.023906] bio: create slab <bio-0> at 0
[ 26.024784] vgaarb: loaded
[ 26.026535] Switching to clocksource orion_clocksource
[ 26.039073] NET: Registered protocol family 2
[ 26.039781] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 26.041957] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 26.042272] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 26.042453] TCP: Hash tables configured (established 4096 bind 4096)
[ 26.042520] TCP reno registered
[ 26.043010] NET: Registered protocol family 1
[ 26.043520] Unpacking initramfs...
[ 26.503725] Freeing initrd memory: 2328K
[ 26.503966] NetWinder Floating Point Emulator V0.97 (double precision)
[ 26.504798] audit: initializing netlink socket (disabled)
[ 26.504924] type=2000 audit(0.720:1): initialized
[ 26.527011] VFS: Disk quotas dquot_6.5.2
[ 26.527865] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 26.528265] msgmni has been set to 245
[ 26.530126] alg: No test for stdrng (krng)
[ 26.530501] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 26.530605] io scheduler noop registered
[ 26.530661] io scheduler anticipatory registered
[ 26.530721] io scheduler deadline registered
[ 26.531414] io scheduler cfq registered (default)
[ 26.549491] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 26.550822] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 3) is a 16550A
[ 26.551595] serial8250.1: ttyS1 at MMIO 0xf1012100 (irq = 4) is a 16550A
[ 26.552713] physmap platform flash device: 00040000 at f4000000
[ 26.552971] Found: SST 39LF020
[ 26.553060] physmap-flash.0: Found 1 x8 devices at 0x0 in 8-bit bank
[ 26.553147] number of JEDEC chips: 1
[ 26.553200] cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
[ 26.566760] RedBoot partition parsing not available
[ 26.569249] mice: PS/2 mouse device common for all mice
[ 26.570030] i2c /dev entries driver
[ 26.573932] rtc-rs5c372 0-0032: rs5c372a found, 24hr, driver version 0.6
[ 26.574435] rtc-rs5c372 0-0032: rtc core: registered rtc-rs5c372 as rtc0
[ 26.575159] mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver
[ 26.606770] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
[ 26.646778] mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy )
[ 26.650332] TCP cubic registered
[ 26.650403] NET: Registered protocol family 17
[ 26.650492] VFP support v0.3: not present
[ 26.651363] registered taskstats version 1
[ 26.653292] rtc-rs5c372 0-0032: setting system clock to 2010-09-15 02:00:52 UTC (1284516052)
[ 26.653396] Initalizing network drop monitor service
[ 26.653642] Freeing init memory: 128K
[ 26.867328] udev: starting version 160
[ 27.630970] SCSI subsystem initialized
[ 27.909792] libata version 3.00 loaded.
[ 27.975536] sata_mv sata_mv.0: version 1.28
[ 27.976712] sata_mv sata_mv.0: slots 32 ports 2
[ 27.978794] scsi0 : sata_mv
[ 27.980807] scsi1 : sata_mv
[ 27.982415] ata1: SATA max UDMA/133 irq 29
[ 27.982500] ata2: SATA max UDMA/133 irq 29
[ 28.326714] ata1: SATA link down (SStatus 0 SControl 300)
[ 28.836722] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 28.857067] ata2.00: ATA-7: SAMSUNG SP2504C, VT100-41, max UDMA7
[ 28.857164] ata2.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 28.897234] ata2.00: configured for UDMA/133
[ 28.898076] scsi 1:0:0:0: Direct-Access ATA SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5
[ 28.996813] sd 1:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 28.997830] sd 1:0:0:0: [sda] Write Protect is off
[ 28.997915] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 28.998314] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 29.002555] sda: sda1 sda2 sda3 < sda5 >
[ 29.049108] sd 1:0:0:0: [sda] Attached SCSI disk
[ 29.950653] kjournald starting. Commit interval 5 seconds
[ 29.950795] EXT3-fs: mounted filesystem with ordered data mode.
[ 31.477779] udev: starting version 160
[ 32.522053] MV-643xx 10/100/1000 ethernet driver version 1.4
[ 32.525094] mv643xx_eth smi: probed
[ 32.552254] net eth0: port 0 with MAC address 00:16:01:41:82:92
[ 33.055823] usbcore: registered new interface driver usbfs
[ 33.058931] usbcore: registered new interface driver hub
[ 33.061396] usbcore: registered new device driver usb
[ 33.523595] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 33.529796] orion-ehci orion-ehci.0: Marvell Orion EHCI
[ 33.530013] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
[ 33.556812] orion-ehci orion-ehci.0: irq 17, io mem 0xf1050000
[ 33.576691] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
[ 33.576912] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 33.576994] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 33.577084] usb usb1: Product: Marvell Orion EHCI
[ 33.577146] usb usb1: Manufacturer: Linux 2.6.32-5-orion5x ehci_hcd
[ 33.577217] usb usb1: SerialNumber: orion-ehci.0
[ 33.578732] usb usb1: configuration #1 chosen from 1 choice
[ 33.579807] hub 1-0:1.0: USB hub found
[ 33.579976] hub 1-0:1.0: 1 port detected
[ 33.580522] orion-ehci orion-ehci.1: Marvell Orion EHCI
[ 33.580705] orion-ehci orion-ehci.1: new USB bus registered, assigned bus number 2
[ 33.606802] orion-ehci orion-ehci.1: irq 12, io mem 0xf10a0000
[ 33.626683] orion-ehci orion-ehci.1: USB 2.0 started, EHCI 1.00
[ 33.626905] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 33.626986] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 33.627076] usb usb2: Product: Marvell Orion EHCI
[ 33.627139] usb usb2: Manufacturer: Linux 2.6.32-5-orion5x ehci_hcd
[ 33.627211] usb usb2: SerialNumber: orion-ehci.1
[ 33.631162] usb usb2: configuration #1 chosen from 1 choice
[ 33.632256] hub 2-0:1.0: USB hub found
[ 33.632426] hub 2-0:1.0: 1 port detected
[ 34.213372] Adding 368632k swap on /dev/sda5. Priority:-1 extents:1 across:368632k
[ 35.075938] EXT3 FS on sda2, internal journal
[ 35.606880] loop: module loaded
Reply to: