Bug#596741: regression: CPU fan fast after resume: won't climb back down
Package: linux-2.6
Version: 2.6.32-21
Severity: normal
Hello,
I suspend using gnome-power-manager or pm-suspend from
pm-utils (same result).
Traditionally on resume, my computer's fans run at what I
assume is full speed (certainly faster/noiser than usual)
for a brief period until userspace is all back.
With 2.6.32-5-686, they never slow back down. My previous
kernel was vmlinuz-2.6.30-2-686, with which this did not
happen (same / with same package versions).
Subsequent resume/suspends do not "unstick" this. I've
reproduced a couple of times. Running the CPU hot (a few
make -j in source trees) for a couple of minutes, then
stopping, doesn't cure it either.
Any suggestions for further diagnosis gladly received.
My computer is a home-built desktop PC; Intel
motherboard/chipset + CPU; onboard Intel graphics and sound
(unused); old ATI card for display; old SB Live for sound;
onboard NIC.
-- Package-specific info:
** Version:
Linux version 2.6.32-5-686 (Debian 2.6.32-21) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-2) ) #1 SMP Wed Aug 25 14:28:12 UTC 2010
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.32-5-686 root=/dev/mapper/tchicaya_vg1-root ro
** Not tainted
** Kernel log:
[ 6.032565] [drm] DVI-I
[ 6.032596] [drm] HPD2
[ 6.032633] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 6.032665] [drm] Encoders:
[ 6.032695] [drm] CRT1: INTERNAL_DAC1
[ 6.032726] [drm] DFP2: INTERNAL_DVO1
[ 6.032756] [drm] Connector 1:
[ 6.032786] [drm] S-video
[ 6.032815] [drm] Encoders:
[ 6.032845] [drm] TV1: INTERNAL_DAC2
[ 6.032875] [drm] Connector 2:
[ 6.032905] [drm] DVI-I
[ 6.032935] [drm] HPD1
[ 6.032965] [drm] DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68
[ 6.032997] [drm] Encoders:
[ 6.033027] [drm] CRT2: INTERNAL_DAC2
[ 6.033057] [drm] DFP1: INTERNAL_TMDS1
[ 6.128739] usbcore: registered new interface driver hiddev
[ 6.141620] input: USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1.1/6-1.1:1.0/input/input3
[ 6.141740] generic-usb 0003:05E3:1205.0001: input,hidraw0: USB HID v1.10 Mouse [USB Mouse ] on usb-0000:00:1d.1-1.1/input0
[ 6.156653] input: Lite-On Tech IBM USB Keyboard with UltraNav as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1.3/6-1.3:1.0/input/input4
[ 6.156739] generic-usb 0003:04B3:3018.0002: input,hidraw1: USB HID v1.10 Keyboard [Lite-On Tech IBM USB Keyboard with UltraNav] on usb-0000:00:1d.1-1.3/input0
[ 6.167669] [drm] fb mappable at 0x800C0000
[ 6.167702] [drm] vram apper at 0x80000000
[ 6.167733] [drm] size 5242880
[ 6.167763] [drm] fb depth is 24
[ 6.167793] [drm] pitch is 5120
[ 6.184526] input: Lite-On Tech IBM USB Keyboard with UltraNav as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1.3/6-1.3:1.1/input/input5
[ 6.184580] generic-usb 0003:04B3:3018.0003: input,hidraw2: USB HID v1.10 Device [Lite-On Tech IBM USB Keyboard with UltraNav] on usb-0000:00:1d.1-1.3/input1
[ 6.196683] phy0: Selected rate control algorithm 'minstrel'
[ 6.197197] zd1211rw 3-4:1.0: phy0
[ 6.197229] usbcore: registered new interface driver zd1211rw
[ 6.197666] input: Synaptics Inc. Composite TouchPad / TrackPoint as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1.4/6-1.4:1.0/input/input6
[ 6.197737] generic-usb 0003:06CB:0009.0004: input,hidraw3: USB HID v1.00 Mouse [Synaptics Inc. Composite TouchPad / TrackPoint] on usb-0000:00:1d.1-1.4/input0
[ 6.210619] input: Synaptics Inc. Composite TouchPad / TrackPoint as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1.4/6-1.4:1.1/input/input7
[ 6.210685] generic-usb 0003:06CB:0009.0005: input,hidraw4: USB HID v1.00 Mouse [Synaptics Inc. Composite TouchPad / TrackPoint] on usb-0000:00:1d.1-1.4/input1
[ 6.210709] usbcore: registered new interface driver usbhid
[ 6.210711] usbhid: v2.6:USB HID core driver
[ 6.224586] Console: switching to colour frame buffer device 160x64
[ 6.230250] fb0: radeondrmfb frame buffer device
[ 6.230280] registered panic notifier
[ 6.230306] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
[ 6.823072] EMU10K1_Audigy 0000:05:03.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 8.474036] EXT3 FS on dm-0, internal journal
[ 9.033282] loop: module loaded
[ 10.637207] usb-storage: device scan complete
[ 10.637645] scsi 6:0:0:0: Direct-Access USB2.0 CardReader CF 0100 PQ: 0 ANSI: 0
[ 10.638144] scsi 6:0:0:1: Direct-Access USB2.0 CardReader SM XD 0100 PQ: 0 ANSI: 0
[ 10.638642] scsi 6:0:0:2: Direct-Access USB2.0 CardReader MS 0100 PQ: 0 ANSI: 0
[ 10.639142] scsi 6:0:0:3: Direct-Access USB2.0 CardReader SD 0100 PQ: 0 ANSI: 0
[ 10.639777] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 10.640182] sd 6:0:0:1: Attached scsi generic sg4 type 0
[ 10.640383] sd 6:0:0:2: Attached scsi generic sg5 type 0
[ 10.642777] sd 6:0:0:3: Attached scsi generic sg6 type 0
[ 10.644063] sd 6:0:0:1: [sdd] Attached SCSI removable disk
[ 10.644175] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 10.646501] sd 6:0:0:3: [sdf] Attached SCSI removable disk
[ 10.647248] sd 6:0:0:2: [sde] Attached SCSI removable disk
[ 11.222529] padlock: VIA PadLock Hash Engine not detected.
[ 11.812502] Adding 1949688k swap on /dev/mapper/tchicaya_vg1-swap_back_crypt. Priority:-1 extents:1 across:1949688k
[ 21.538033] kjournald starting. Commit interval 5 seconds
[ 21.538302] EXT3 FS on sdb3, internal journal
[ 21.538306] EXT3-fs: mounted filesystem with ordered data mode.
[ 21.568370] kjournald starting. Commit interval 5 seconds
[ 21.568605] EXT3 FS on dm-4, internal journal
[ 21.568607] EXT3-fs: mounted filesystem with ordered data mode.
[ 21.634976] kjournald starting. Commit interval 5 seconds
[ 21.635141] EXT3 FS on dm-13, internal journal
[ 21.635144] EXT3-fs: mounted filesystem with ordered data mode.
[ 22.102443] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 22.197442] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 22.294465] fuse init (API version 7.13)
[ 26.164183] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[ 26.220061] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[ 26.220286] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 28.015548] e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 28.017631] 0000:00:19.0: eth1: 10/100 speed: disabling TSO
[ 28.019923] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 33.489906] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 33.681179] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 36.299258] lo: Disabled Privacy Extensions
[ 38.720005] eth1: no IPv6 routers present
[ 41.096886] padlock: VIA PadLock not detected.
[ 41.404180] kjournald starting. Commit interval 5 seconds
[ 41.404184] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 41.408238] EXT3 FS on dm-26, internal journal
[ 41.408246] EXT3-fs: mounted filesystem with ordered data mode.
[ 44.317145] kjournald starting. Commit interval 5 seconds
[ 44.317148] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 44.325152] EXT3 FS on dm-27, internal journal
[ 44.325160] EXT3-fs: mounted filesystem with ordered data mode.
[ 47.319462] kjournald starting. Commit interval 5 seconds
[ 47.319470] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 47.320650] EXT3 FS on dm-28, internal journal
[ 47.320658] EXT3-fs: mounted filesystem with ordered data mode.
[ 50.224063] kjournald starting. Commit interval 5 seconds
[ 50.224072] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 50.226623] EXT3 FS on dm-29, internal journal
[ 50.226631] EXT3-fs: mounted filesystem with ordered data mode.
[ 99.030858] lo: Disabled Privacy Extensions
** Model information
not available
** Loaded modules:
Module Size Used by
aes_i586 6816 8
aes_generic 25738 1 aes_i586
acpi_cpufreq 4943 0
cpufreq_userspace 1480 0
ip6table_filter 1908 0
cpufreq_conservative 4018 0
ip6_tables 8560 1 ip6table_filter
cpufreq_powersave 602 0
iptable_filter 1790 0
cpufreq_stats 1940 0
ip_tables 7690 1 iptable_filter
x_tables 8327 2 ip6_tables,ip_tables
kvm_intel 32824 0
kvm 182619 1 kvm_intel
binfmt_misc 4907 1
fuse 43762 3
nls_utf8 908 2
nls_cp437 4489 2
vfat 6570 2
fat 34912 1 vfat
sha256_generic 10748 10
blowfish 7252 2
cbc 2047 5
firewire_sbp2 9647 0
loop 9765 0
dm_crypt 9127 5
md_mod 67329 0
snd_emu10k1_synth 4024 0
snd_emux_synth 21890 1 snd_emu10k1_synth
snd_seq_virmidi 2955 1 snd_emux_synth
snd_seq_midi_emul 3554 1 snd_emux_synth
snd_emu10k1 104712 1 snd_emu10k1_synth
snd_ac97_codec 79148 1 snd_emu10k1
ac97_bus 710 1 snd_ac97_codec
snd_pcm_oss 28671 0
snd_mixer_oss 10461 1 snd_pcm_oss
snd_pcm 47214 3 snd_emu10k1,snd_ac97_codec,snd_pcm_oss
snd_page_alloc 5045 2 snd_emu10k1,snd_pcm
snd_util_mem 1548 2 snd_emux_synth,snd_emu10k1
snd_hwdep 4054 2 snd_emux_synth,snd_emu10k1
snd_seq_midi 3576 0
snd_rawmidi 12513 3 snd_seq_virmidi,snd_emu10k1,snd_seq_midi
arc4 974 2
snd_seq_midi_event 3684 2 snd_seq_virmidi,snd_seq_midi
ecb 1405 2
snd_seq 35463 6 snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_midi,snd_seq_midi_event
usbhid 27988 0
snd_timer 12258 3 snd_emu10k1,snd_pcm,snd_seq
hid 50645 1 usbhid
snd_seq_device 3673 5 snd_emu10k1_synth,snd_emu10k1,snd_seq_midi,snd_rawmidi,snd_seq
radeon 509635 3
ttm 33378 1 radeon
drm_kms_helper 18305 1 radeon
zd1211rw 32550 0
mac80211 123266 1 zd1211rw
cfg80211 87625 2 zd1211rw,mac80211
rfkill 10264 1 cfg80211
drm 112020 5 radeon,ttm,drm_kms_helper
i2c_algo_bit 3497 1 radeon
usb_storage 30541 0
evdev 5609 15
i2c_i801 6462 0
pcspkr 1207 0
i2c_core 12696 5 radeon,drm_kms_helper,drm,i2c_algo_bit,i2c_i801
emu10k1_gp 1238 0
snd 34363 13 snd_emux_synth,snd_seq_virmidi,snd_emu10k1,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_hwdep,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 3450 1 snd
gameport 6061 2 emu10k1_gp
psmouse 44657 0
processor 26671 1 acpi_cpufreq
button 3598 0
serio_raw 2916 0
ext3 94204 8
jbd 32169 1 ext3
mbcache 3762 1 ext3
dm_mod 46082 89 dm_crypt
sg 15968 0
sr_mod 10770 0
sd_mod 25869 6
crc_t10dif 1012 1 sd_mod
cdrom 26487 1 sr_mod
pata_jmicron 1452 0
uhci_hcd 16057 0
firewire_ohci 16509 0
thermal 9206 0
firewire_core 31187 2 firewire_sbp2,firewire_ohci
crc_itu_t 1035 1 firewire_core
ata_generic 2019 0
ata_piix 17736 4
libata 115721 3 pata_jmicron,ata_generic,ata_piix
ehci_hcd 27851 0
scsi_mod 101401 6 firewire_sbp2,usb_storage,sg,sr_mod,sd_mod,libata
thermal_sys 9378 2 processor,thermal
usbcore 98397 6 usbhid,zd1211rw,usb_storage,uhci_hcd,ehci_hcd
nls_base 4541 5 nls_utf8,nls_cp437,vfat,fat,usbcore
e1000e 97677 0
** Network interface configuration:
auto lo
iface lo inet loopback
allow-hotplug eth1
iface eth1 inet dhcp
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 100
link/ether 00:1c:c0:6b:15:54 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.70/24 brd 192.168.1.255 scope global eth1
inet6 fe80::21c:c0ff:fe6b:1554/64 scope link
valid_lft forever preferred_lft forever
3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 00:02:72:89:7b:6a brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
eth1: 329731 612 0 0 0 0 0 0 121421 725 0 0 0 0 0 0
wlan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
607 total packets received
2 with invalid addresses
0 forwarded
0 incoming packets discarded
605 incoming packets delivered
688 requests sent out
12 dropped because of missing route
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
48 active connections openings
0 passive connection openings
0 failed connection attempts
0 connection resets received
28 connections established
501 segments received
573 segments send out
8 segments retransmited
0 bad segments received.
2 resets sent
Udp:
103 packets received
0 packets to unknown port received.
0 packet receive errors
105 packets sent
UdpLite:
TcpExt:
7 TCP sockets finished time wait in fast timer
26 delayed acks sent
Quick ack mode was activated 5 times
2 packets directly queued to recvmsg prequeue.
2 bytes directly received in process context from prequeue
278 packet headers predicted
65 acknowledgments not containing data payload received
23 predicted acknowledgments
8 other TCP timeouts
2 DSACKs sent for old packets
IpExt:
InMcastPkts: 15
OutMcastPkts: 17
InOctets: 324639
OutOctets: 105292
InMcastOctets: 4396
OutMcastOctets: 4476
*** Device features:
eth1: 0x9a9
lo: 0x13865
wlan0: 0x2000
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82G35 Express DRAM Controller [8086:2980] (rev 03)
Subsystem: Intel Corporation Device [8086:d701]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation 82G35 Express PCI Express Root Port [8086:2981] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: 90100000-901fffff
Prefetchable memory behind bridge: 0000000080000000-000000008fffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:19.0 Ethernet controller [0200]: Intel Corporation 82566DC Gigabit Network Connection [8086:104b] (rev 02)
Subsystem: Intel Corporation Device [8086:d701]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 28
Region 0: Memory at 90200000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at 90220000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 40c0 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:d701]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 40a0 [size=32]
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:d701]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 4080 [size=32]
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 02) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Device [8086:d701]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at 90221400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: 90300000-904fffff
Prefetchable memory behind bridge: 0000000090500000-00000000906fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00006000-00006fff
Memory behind bridge: 90700000-908fffff
Prefetchable memory behind bridge: 0000000090900000-0000000090afffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 [8086:2843] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 90b00000-90cfffff
Prefetchable memory behind bridge: 0000000090d00000-0000000090efffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:d701]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 4060 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:d701]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 4040 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:d701]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 4020 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 02) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Device [8086:d701]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at 90221000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev f2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 90000000-900fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HB/HR (ICH8/R) LPC Interface Controller [8086:2810] (rev 02)
Subsystem: Intel Corporation Device [8086:d701]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation 82801H (ICH8 Family) 4 port SATA IDE Controller [8086:2820] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Intel Corporation Device [8086:d701]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 4438 [size=8]
Region 1: I/O ports at 444c [size=4]
Region 2: I/O ports at 4430 [size=8]
Region 3: I/O ports at 4448 [size=4]
Region 4: I/O ports at 4410 [size=16]
Region 5: I/O ports at 4400 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 02)
Subsystem: Intel Corporation Device [8086:d701]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 21
Region 0: Memory at 90221800 (32-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 4000 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 IDE interface [0101]: Intel Corporation 82801H (ICH8 Family) 2 port SATA IDE Controller [8086:2825] (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: Intel Corporation Device [8086:d701]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 4428 [size=8]
Region 1: I/O ports at 4444 [size=4]
Region 2: I/O ports at 4420 [size=8]
Region 3: I/O ports at 4440 [size=4]
Region 4: I/O ports at 40f0 [size=16]
Region 5: I/O ports at 40e0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc R480 [Radeon X850XT (PCIE)] (Primary) [1002:5d52] (prog-if 00 [VGA controller])
Subsystem: Giga-byte Technology Device [1458:2112]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 29
Region 0: Memory at 80000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at 90100000 (64-bit, non-prefetchable) [size=64K]
Region 4: I/O ports at 3000 [size=256]
Expansion ROM at 90120000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
01:00.1 Display controller [0380]: ATI Technologies Inc R480 [Radeon X850XT (PCIE)] (Secondary) [1002:5d72]
Subsystem: Giga-byte Technology Device [1458:2113]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Region 0: Memory at 90110000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
04:00.0 IDE interface [0101]: JMicron Technology Corp. JMB368 IDE controller [197b:2368] (prog-if 85 [Master SecO PriO])
Subsystem: JMicron Technology Corp. JMB368 IDE controller [197b:2368]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 2018 [size=8]
Region 1: I/O ports at 2024 [size=4]
Region 2: I/O ports at 2010 [size=8]
Region 3: I/O ports at 2020 [size=4]
Region 4: I/O ports at 2000 [size=16]
Expansion ROM at 90d00000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: pata_jmicron
05:03.0 Multimedia audio controller [0401]: Creative Labs SB Live! EMU10k1 [1102:0002] (rev 07)
Subsystem: Creative Labs CT4760 SBLive! [1102:8040]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B+ DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at 1000 [size=32]
Capabilities: <access denied>
Kernel driver in use: EMU10K1_Audigy
05:03.1 Input device controller [0980]: Creative Labs SB Live! Game Port [1102:7002] (rev 07)
Subsystem: Creative Labs Gameport Joystick [1102:0020]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B+ DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Region 0: I/O ports at 1020 [size=8]
Capabilities: <access denied>
Kernel driver in use: Emu10k1_gameport
05:05.0 FireWire (IEEE 1394) [0c00]: Agere Systems FW322/323 [11c1:5811] (rev 70) (prog-if 10 [OHCI])
Subsystem: Intel Corporation Device [8086:d701]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B+ DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (3000ns min, 6000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at 90000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
** USB devices:
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 005: ID 06cb:0009 Synaptics, Inc. Composite TouchPad and TrackPoint
Bus 006 Device 004: ID 04b3:3018 IBM Corp. UltraNav Keyboard
Bus 006 Device 003: ID 05e3:1205 Genesys Logic, Inc. Afilias Optical Mouse H3003
Bus 006 Device 002: ID 04b3:3016 IBM Corp. UltraNav Keyboard Hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 005: ID 0cf2:6230 ENE Technology, Inc.
Bus 003 Device 004: ID 1a40:0101 TERMINUS TECHNOLOGY INC. USB-2.0 4-Port HUB
Bus 003 Device 003: ID 0ace:1215 ZyDAS ZD1211B 802.11g
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-686 (SMP w/4 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-686 depends on:
ii debconf [debconf-2.0] 1.5.35 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.1 tools for generating an initramfs
ii linux-base 2.6.32-21 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-686 recommends:
ii firmware-linux-free 2.6.32-21 Binary firmware for various driver
ii libc6-i686 2.11.2-2 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.32-5-686 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
ii firmware-linux-nonfree 0.26 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-686/prerm/removing-running-kernel-2.6.32-5-686: true
linux-image-2.6.32-5-686/postinst/depmod-error-initrd-2.6.32-5-686: false
linux-image-2.6.32-5-686/postinst/ignoring-do-bootloader-2.6.32-5-686:
linux-image-2.6.32-5-686/postinst/missing-firmware-2.6.32-5-686:
Reply to: