Bug#596390: Log messages from 2.6.30 and 2.6.32
-------- Forwarded Message --------
From: Shawn Heisey <elyograg@elyograg.org>
To: Ben Hutchings <ben@decadent.org.uk>
Subject: Re: Bug#596390: Log messages from 2.6.30 and 2.6.32
Date: Sat, 11 Sep 2010 01:03:40 -0600
On 9/10/2010 4:57 PM, Ben Hutchings wrote:
> Please test a newer version. There was a bug fix to r8169 in version
> 2.6.32-16 which might address this.
I've already got 2.6.32-20, significantly newer than the -16 you're
mentioning. There is a -21 version on backports that I will try out as
soon as I can. If you'd like me to try something even newer, please
tell me how to either get a binary package that's compatible with Lenny,
or how to go about building it myself in a way that results in a package.
To make it easier to see what's different in the logs you already have,
I stripped off the first several columns of the two kernel logs and
diffed them. Attached.
--- 1 2010-09-10 15:48:53.000000000 -0600
+++ 2 2010-09-10 15:48:57.000000000 -0600
@@ -1,7 +1,7 @@
/proc/kmsg started.
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
-Linux version 2.6.30-bpo.1-amd64 (Debian 2.6.30-6~bpo50+1) (nobse@debian.org) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 SMP Mon Aug 17 08:42:50 UTC 2009
+Linux version 2.6.32-bpo.5-amd64 (Debian 2.6.32-15~bpo50+1) (norbert@tretkowski.de) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 SMP Fri Jun 11 08:42:31 UTC 2010
Command line: root=/dev/md2 ro quiet
KERNEL supported cpus:
Intel GenuineIntel
@@ -20,7 +20,7 @@
DMI present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
-last_pfn = 0x120000 max_arch_pfn = 0x100000000
+last_pfn = 0x120000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
@@ -38,22 +38,22 @@
TOM2: 0000000130000000 aka 4864M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
-last_pfn = 0xcfea0 max_arch_pfn = 0x100000000
-init_memory_mapping: 0000000000000000-00000000cfea0000
+last_pfn = 0xcfea0 max_arch_pfn = 0x400000000
+initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
+init_memory_mapping: 0000000000000000-00000000cfea0000
0000000000 - 00c0000000 page 1G
00c0000000 - 00cfe00000 page 2M
00cfe00000 - 00cfea0000 page 4k
kernel direct mapping tables up to cfea0000 @ 10000-13000
init_memory_mapping: 0000000100000000-0000000120000000
-Using GB pages for direct mapping
0100000000 - 0120000000 page 2M
kernel direct mapping tables up to 120000000 @ 12000-14000
-RAMDISK: 377a3000 - 37fefcb6
+RAMDISK: 37689000 - 37feffae
ACPI: RSDP 00000000000fbcf0 00014 (v00 ACPIAM)
ACPI: RSDT 00000000cfea0000 0003C (v01 112609 RSDT1659 20091126 MSFT 00000097)
ACPI: FACP 00000000cfea0200 00084 (v01 A_M_I OEMFACP 12000601 MSFT 00000097)
-ACPI Warning (tbfadt-0562): Optional field Pm2ControlBlock has zero address or length: 0000000000000000/1 [20090320]
+ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0000000000000000/1 (20090903/tbfadt-557)
ACPI: DSDT 00000000cfea0450 09134 (v01 AS239 AS239161 00000161 INTL 20051117)
ACPI: FACS 00000000cfeb0000 00040
ACPI: APIC 00000000cfea0390 0007C (v01 112609 APIC1659 20091126 MSFT 00000097)
@@ -71,14 +71,14 @@
(8 early reservations) ==> bootmem [0000000000 - 0120000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
- #2 [0000200000 - 00007d98cc] TEXT DATA BSS ==> [0000200000 - 00007d98cc]
- #3 [00377a3000 - 0037fefcb6] RAMDISK ==> [00377a3000 - 0037fefcb6]
+ #2 [0001000000 - 000167c314] TEXT DATA BSS ==> [0001000000 - 000167c314]
+ #3 [0037689000 - 0037feffae] RAMDISK ==> [0037689000 - 0037feffae]
#4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
- #5 [00007da000 - 00007da173] BRK ==> [00007da000 - 00007da173]
+ #5 [000167d000 - 000167d173] BRK ==> [000167d000 - 000167d173]
#6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
#7 [0000012000 - 0000013000] PGTABLE ==> [0000012000 - 0000013000]
found SMP MP-table at [ffff8800000ff780] ff780
- [ffffe20000000000-ffffe20003ffffff] PMD -> [ffff880028200000-ffff88002b7fffff] on node 0
+ [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff880001800000-ffff880004dfffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
@@ -90,8 +90,8 @@
0: 0x00100000 -> 0x00120000
On node 0 totalpages: 982575
DMA zone: 56 pages used for memmap
- DMA zone: 1599 pages reserved
- DMA zone: 2328 pages, LIFO batch:0
+ DMA zone: 102 pages reserved
+ DMA zone: 3825 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 833240 pages, LIFO batch:31
Normal zone: 1792 pages used for memmap
@@ -105,7 +105,7 @@
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
ACPI: IOAPIC (id[0x03] address[0xfec00000] gsi_base[0])
-IOAPIC[0]: apic_id 3, version 0, address 0xfec00000, GSI 0-23
+IOAPIC[0]: apic_id 3, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
@@ -123,36 +123,39 @@
PM: Registered nosave memory: 00000000cfee0000 - 00000000cff00000
PM: Registered nosave memory: 00000000cff00000 - 00000000fff00000
PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
-Allocating PCI resources starting at d0000000 (gap: cff00000:30000000)
+Allocating PCI resources starting at cff00000 (gap: cff00000:30000000)
+Booting paravirtualized kernel on bare hardware
NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:6 nr_node_ids:1
-PERCPU: Embedded 26 pages at ffff88002801f000, static data 76256 bytes
-Built 1 zonelists in Node order, mobility grouping on. Total pages: 964848
+PERCPU: Embedded 29 pages/cpu @ffff880005000000 s90008 r8192 d20584 u262144
+pcpu-alloc: s90008 r8192 d20584 u262144 alloc=1*2097152
+pcpu-alloc: [0] 0 1 2 3 4 5 - -
+Built 1 zonelists in Node order, mobility grouping on. Total pages: 966345
Policy zone: Normal
Kernel command line: root=/dev/md2 ro quiet
+PID hash table entries: 4096 (order: 3, 32768 bytes)
Initializing CPU#0
-Experimental hierarchical RCU implementation.
-Experimental hierarchical RCU init done.
-NR_IRQS:4352 nr_irqs:456
-PID hash table entries: 4096 (order: 12, 32768 bytes)
-Fast TSC calibration using PIT
-Detected 2999.835 MHz processor.
-Console: colour VGA+ 80x25
-console [tty0] enabled
Checking aperture...
No AGP bridge found
-Node 0: aperture @ 4504000000 size 32 MB
-Aperture beyond 4GB. Ignoring.
+Node 0: aperture @ 20000000 size 32 MB
+Aperture pointing to e820 RAM. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 20000000
PM: Registered nosave memory: 0000000020000000 - 0000000024000000
-Memory: 3794104k/4718592k available (2785k kernel code, 788292k absent, 136196k reserved, 1398k data, 560k init)
+Memory: 3792076k/4718592k available (3060k kernel code, 788292k absent, 138224k reserved, 1869k data, 584k init)
+SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
+Hierarchical RCU implementation.
+NR_IRQS:4352 nr_irqs:456
+Console: colour VGA+ 80x25
+console [tty0] enabled
hpet clockevent registered
- alloc irq_desc for 24 on cpu 0 node 0
- alloc kstat_irqs on cpu 0 node 0
+ alloc irq_desc for 24 on node 0
+ alloc kstat_irqs on node 0
HPET: 4 timers in total, 1 timers will be used for per-cpu timer
-Calibrating delay loop (skipped), value calculated using timer frequency.. 5999.66 BogoMIPS (lpj=11999324)
+Fast TSC calibration using PIT
+Detected 2999.665 MHz processor.
+Calibrating delay loop (skipped), value calculated using timer frequency.. 5999.32 BogoMIPS (lpj=11998644)
Security Framework initialized
SELinux: Disabled at boot.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
@@ -169,35 +172,40 @@
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
+mce: CPU supports 6 MCE banks
using C1E aware idle routine
-ACPI: Core revision 20090320
+Performance Events: AMD PMU driver.
+... version: 0
+... bit width: 48
+... generic registers: 4
+... value mask: 0000ffffffffffff
+... max period: 00007fffffffffff
+... fixed-purpose events: 0
+... event mask: 000000000000000f
+ACPI: Core revision 20090903
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Phenom(tm) II X3 705e Processor stepping 02
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
-Calibrating delay using timer specific routine.. 6000.01 BogoMIPS (lpj=12000032)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1/0x1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
-x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: AMD Phenom(tm) II X3 705e Processor stepping 02
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Booting processor 2 APIC 0x2 ip 0x6000
Initializing CPU#2
-Calibrating delay using timer specific routine.. 6000.01 BogoMIPS (lpj=12000033)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 2/0x2 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
-x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
CPU2: AMD Phenom(tm) II X3 705e Processor stepping 02
checking TSC synchronization [CPU#0 -> CPU#2]: passed.
Brought up 3 CPUs
-Total of 3 processors activated (17999.69 BogoMIPS).
+Total of 3 processors activated (17999.18 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0-2 level MC
groups: 0 1 2
@@ -207,8 +215,7 @@
CPU2 attaching sched-domain:
domain 0: span 0-2 level MC
groups: 2 0 1
-net_namespace: 1936 bytes
-Booting paravirtualized kernel on bare hardware
+devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
node 0 link 0: io port [1000, ffffff]
@@ -233,13 +240,16 @@
PCI: Using configuration type 1 for extended access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
+ACPI Error (psargs-0359): [ECEN] Namespace lookup failure, AE_NOT_FOUND
+ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff8165f7d0), AE_NOT_FOUND
+ACPI: Executed 4 blocks of module-level executable AML code
ACPI: Interpreter enabled
-ACPI: (supports S0 S1 S3 S4 S5)
+ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG at e0000000 - efffffff
-ACPI Warning (tbutils-0246): Incorrect checksum in table [OEMB] - 62, should be 61 [20090320]
+ACPI Warning: Incorrect checksum in table [OEMB] - 62, should be 61 (20090903/tbutils-314)
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
@@ -271,7 +281,7 @@
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: PME# disabled
pci 0000:00:14.5: reg 10 32bit mmio: [0xfe7f6000-0xfe7f6fff]
-pci 0000:01:05.0: reg 10 32bit mmio: [0xd0000000-0xdfffffff]
+pci 0000:01:05.0: reg 10 32bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:01:05.0: reg 14 io port: [0xc000-0xc0ff]
pci 0000:01:05.0: reg 18 32bit mmio: [0xfe9f0000-0xfe9fffff]
pci 0000:01:05.0: reg 24 32bit mmio: [0xfe800000-0xfe8fffff]
@@ -280,9 +290,9 @@
pci 0000:00:01.0: bridge 32bit mmio: [0xfe800000-0xfe9fffff]
pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:02:00.0: reg 10 io port: [0xd800-0xd8ff]
-pci 0000:02:00.0: reg 18 64bit mmio: [0xfdfff000-0xfdffffff]
-pci 0000:02:00.0: reg 20 64bit mmio: [0xfdff8000-0xfdffbfff]
-pci 0000:02:00.0: reg 30 32bit mmio: [0xfeae0000-0xfeafffff]
+pci 0000:02:00.0: reg 18 64bit mmio pref: [0xfdfff000-0xfdffffff]
+pci 0000:02:00.0: reg 20 64bit mmio pref: [0xfdff8000-0xfdffbfff]
+pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfeae0000-0xfeafffff]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
@@ -309,17 +319,12 @@
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
-usbcore: registered new interface driver usbfs
-usbcore: registered new interface driver hub
-usbcore: registered new device driver usb
+vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
+vgaarb: loaded
PCI: Using ACPI for IRQ routing
-PCI-DMA: Disabling AGP.
-PCI-DMA: aperture base @ 20000000 size 65536 KB
-PCI-DMA: using GART IOMMU.
-PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
-hpet: hpet2 irq 24 for MSI
+Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
@@ -368,8 +373,8 @@
pci 0000:00:14.4: IO window: 0xe000-0xefff
pci 0000:00:14.4: MEM window: 0xfeb00000-0xfebfffff
pci 0000:00:14.4: PREFETCH window: disabled
- alloc irq_desc for 18 on cpu 0 node 0
- alloc kstat_irqs on cpu 0 node 0
+ alloc irq_desc for 18 on node 0
+ alloc kstat_irqs on node 0
pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:0a.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
@@ -391,33 +396,33 @@
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
-Trying to unpack rootfs image as initramfs...
-Switched to high resolution mode on CPU 1
-Switched to high resolution mode on CPU 2
-Switched to high resolution mode on CPU 0
-Freeing initrd memory: 8499k freed
+pci 0000:01:05.0: Boot video device
+Unpacking initramfs...
+Freeing initrd memory: 9627k freed
+PCI-DMA: Disabling AGP.
+PCI-DMA: aperture base @ 20000000 size 65536 KB
+PCI-DMA: using GART IOMMU.
+PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
audit: initializing netlink socket (disabled)
-type=2000 audit(1283394450.540:1): initialized
+type=2000 audit(1283394283.624:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
-msgmni has been set to 7426
+msgmni has been set to 7425
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
-pci 0000:01:05.0: Boot video device
- alloc irq_desc for 25 on cpu 0 node 0
- alloc kstat_irqs on cpu 0 node 0
-pcieport-driver 0000:00:0a.0: irq 25 for MSI/MSI-X
-pcieport-driver 0000:00:0a.0: setting latency timer to 64
+ alloc irq_desc for 25 on node 0
+ alloc kstat_irqs on node 0
+pcieport 0000:00:0a.0: irq 25 for MSI/MSI-X
+pcieport 0000:00:0a.0: setting latency timer to 64
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
-brd: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
@@ -434,141 +439,113 @@
lo: Disabled Privacy Extensions
Mobile IPv6
NET: Registered protocol family 17
+PM: Resume from disk failed.
registered taskstats version 1
-rtc_cmos 00:03: setting system clock to 2010-09-02 02:27:31 UTC (1283394451)
-Freeing unused kernel memory: 560k freed
-Write protecting the kernel read-only data: 3796k
+rtc_cmos 00:03: setting system clock to 2010-09-02 02:24:44 UTC (1283394284)
+Initalizing network drop monitor service
+Freeing unused kernel memory: 584k freed
+Write protecting the kernel read-only data: 4192k
+udevd version 125 started
+SCSI subsystem initialized
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
r8169 0000:02:00.0: setting latency timer to 64
- alloc irq_desc for 26 on cpu 0 node 0
- alloc kstat_irqs on cpu 0 node 0
+ alloc irq_desc for 26 on node 0
+ alloc kstat_irqs on node 0
r8169 0000:02:00.0: irq 26 for MSI/MSI-X
-eth0: RTL8168d/8111d at 0xffffc20000668000, 00:25:22:24:e8:21, XID 281000c0 IRQ 26
-SCSI subsystem initialized
-ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- alloc irq_desc for 16 on cpu 0 node 0
- alloc kstat_irqs on cpu 0 node 0
-ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
-ohci_hcd 0000:00:12.0: OHCI Host Controller
-ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 1
-ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe7fe000
-Uniform Multi-Platform E-IDE driver
-ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
-Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
+eth0: RTL8168d/8111d at 0xffffc90000674000, 00:25:22:24:e8:21, XID 081000c0 IRQ 26
+usbcore: registered new interface driver usbfs
+usbcore: registered new interface driver hub
libata version 3.00 loaded.
- alloc irq_desc for 22 on cpu 0 node 0
- alloc kstat_irqs on cpu 0 node 0
+usbcore: registered new device driver usb
+ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
+ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
+ alloc irq_desc for 22 on node 0
+ alloc kstat_irqs on node 0
firewire_ohci 0000:03:07.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
-usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
-usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
-usb usb1: Product: OHCI Host Controller
-usb usb1: Manufacturer: Linux 2.6.30-bpo.1-amd64 ohci_hcd
-usb usb1: SerialNumber: 0000:00:12.0
-usb usb1: configuration #1 chosen from 1 choice
-hub 1-0:1.0: USB hub found
-hub 1-0:1.0: 3 ports detected
- alloc irq_desc for 17 on cpu 0 node 0
- alloc kstat_irqs on cpu 0 node 0
-ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
-ehci_hcd 0000:00:12.2: EHCI Host Controller
-ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 2
-ehci_hcd 0000:00:12.2: debug port 1
-ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe7ff800
-ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
-usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
-usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
-usb usb2: Product: EHCI Host Controller
-usb usb2: Manufacturer: Linux 2.6.30-bpo.1-amd64 ehci_hcd
-usb usb2: SerialNumber: 0000:00:12.2
-usb usb2: configuration #1 chosen from 1 choice
-hub 2-0:1.0: USB hub found
-hub 2-0:1.0: 6 ports detected
+r8169 0000:02:00.0: firmware: requesting rtl8168d-1.fw
+ alloc irq_desc for 16 on node 0
+ alloc kstat_irqs on node 0
+pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
+pata_atiixp 0000:00:14.1: setting latency timer to 64
+scsi0 : pata_atiixp
+scsi1 : pata_atiixp
+ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
+ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
-ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
-scsi0 : ahci
-scsi1 : ahci
+ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
-ata1: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd00 irq 22
-ata2: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd80 irq 22
-ata3: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffe00 irq 22
-ata4: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffe80 irq 22
-ata5: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7fff00 irq 22
-ata6: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7fff80 irq 22
-atiixp 0000:00:14.1: IDE controller (0x1002:0x439c rev 0x00)
-ATIIXP_IDE 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
-atiixp 0000:00:14.1: not 100% native mode: will probe irqs later
- ide0: BM-DMA at 0xff00-0xff07
- ide1: BM-DMA at 0xff08-0xff0f
-Probing IDE interface ide0...
+scsi6 : ahci
+scsi7 : ahci
+ata3: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd00 irq 22
+ata4: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd80 irq 22
+ata5: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffe00 irq 22
+ata6: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffe80 irq 22
+ata7: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7fff00 irq 22
+ata8: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7fff80 irq 22
+ alloc irq_desc for 17 on node 0
+ alloc kstat_irqs on node 0
+ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
+ehci_hcd 0000:00:12.2: EHCI Host Controller
+ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
+ehci_hcd 0000:00:12.2: debug port 1
+ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe7ff800
firewire_ohci: Added fw-ohci device 0000:03:07.0, OHCI version 1.10
-ata4: SATA link down (SStatus 0 SControl 300)
-ata3: SATA link down (SStatus 0 SControl 300)
-ata6: SATA link down (SStatus 0 SControl 300)
-ata5: SATA link down (SStatus 0 SControl 300)
-ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
-ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
-ata1.00: ATA-8: ST31000340NS, SN06, max UDMA/133
-ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
-ata2.00: ATA-8: ST31000340NS, SN16, max UDMA/133
-ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
-ata1.00: configured for UDMA/133
-ata2.00: configured for UDMA/133
-firewire_core: created device fw0: GUID 008f13005f320800, S400
-Probing IDE interface ide1...
-scsi 0:0:0:0: Direct-Access ATA ST31000340NS SN06 PQ: 0 ANSI: 5
-scsi 1:0:0:0: Direct-Access ATA ST31000340NS SN16 PQ: 0 ANSI: 5
-Driver 'sd' needs updating - please use bus_type methods
-sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
-sd 1:0:0:0: [sdb] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
-sd 1:0:0:0: [sdb] Write Protect is off
-sd 0:0:0:0: [sda] Write Protect is off
-sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
-sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
-sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
-sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- sda:<6> sdb: sda1 sda2 sda3 sda4 < sdb1 sdb2 sdb3 sdb4 < sdb5 sda5 sdb6 sda6 sdb7 sda7 sda8 sdb8 sda9 >
-sd 0:0:0:0: [sda] Attached SCSI disk
- sdb9 >
-sd 1:0:0:0: [sdb] Attached SCSI disk
-hdd: CDU5211, ATAPI CD/DVD-ROM drive
-hdd: host max PIO4 wanted PIO255(auto-tune) selected PIO4
-hdd: UDMA/33 mode selected
-ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
-ide1 at 0x170-0x177,0x376 on irq 15
-ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
-ohci_hcd 0000:00:12.1: OHCI Host Controller
-ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 3
-ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe7fd000
-usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
-usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
-usb usb3: Product: OHCI Host Controller
-usb usb3: Manufacturer: Linux 2.6.30-bpo.1-amd64 ohci_hcd
-usb usb3: SerialNumber: 0000:00:12.1
-usb usb3: configuration #1 chosen from 1 choice
-hub 3-0:1.0: USB hub found
-hub 3-0:1.0: 3 ports detected
- alloc irq_desc for 19 on cpu 0 node 0
- alloc kstat_irqs on cpu 0 node 0
+ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
+usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
+usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
+usb usb1: Product: EHCI Host Controller
+usb usb1: Manufacturer: Linux 2.6.32-bpo.5-amd64 ehci_hcd
+usb usb1: SerialNumber: 0000:00:12.2
+usb usb1: configuration #1 chosen from 1 choice
+hub 1-0:1.0: USB hub found
+hub 1-0:1.0: 6 ports detected
+ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
+ohci_hcd 0000:00:12.0: OHCI Host Controller
+ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 2
+ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe7fe000
+eth0: unable to apply firmware patch
+usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
+usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
+usb usb2: Product: OHCI Host Controller
+usb usb2: Manufacturer: Linux 2.6.32-bpo.5-amd64 ohci_hcd
+usb usb2: SerialNumber: 0000:00:12.0
+usb usb2: configuration #1 chosen from 1 choice
+hub 2-0:1.0: USB hub found
+hub 2-0:1.0: 3 ports detected
+ alloc irq_desc for 19 on node 0
+ alloc kstat_irqs on node 0
ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.2: EHCI Host Controller
-ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
+ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe7ff400
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
-usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
+usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
+usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
+usb usb3: Product: EHCI Host Controller
+usb usb3: Manufacturer: Linux 2.6.32-bpo.5-amd64 ehci_hcd
+usb usb3: SerialNumber: 0000:00:13.2
+usb usb3: configuration #1 chosen from 1 choice
+hub 3-0:1.0: USB hub found
+hub 3-0:1.0: 6 ports detected
+ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
+ohci_hcd 0000:00:12.1: OHCI Host Controller
+ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
+ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe7fd000
+usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
-usb usb4: Product: EHCI Host Controller
-usb usb4: Manufacturer: Linux 2.6.30-bpo.1-amd64 ehci_hcd
-usb usb4: SerialNumber: 0000:00:13.2
+usb usb4: Product: OHCI Host Controller
+usb usb4: Manufacturer: Linux 2.6.32-bpo.5-amd64 ohci_hcd
+usb usb4: SerialNumber: 0000:00:12.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
-hub 4-0:1.0: 6 ports detected
+hub 4-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
@@ -576,7 +553,7 @@
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
-usb usb5: Manufacturer: Linux 2.6.30-bpo.1-amd64 ohci_hcd
+usb usb5: Manufacturer: Linux 2.6.32-bpo.5-amd64 ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
@@ -585,13 +562,10 @@
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe7f7000
-ide-cd driver 5.00
-ide-cd: hdd: ATAPI 52X CD-ROM drive, 120kB Cache
-Uniform CD-ROM driver Revision: 3.20
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
-usb usb6: Manufacturer: Linux 2.6.30-bpo.1-amd64 ohci_hcd
+usb usb6: Manufacturer: Linux 2.6.32-bpo.5-amd64 ohci_hcd
usb usb6: SerialNumber: 0000:00:13.1
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
@@ -600,51 +574,96 @@
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe7f6000
+ata6: SATA link down (SStatus 0 SControl 300)
+ata7: SATA link down (SStatus 0 SControl 300)
+ata8: SATA link down (SStatus 0 SControl 300)
+ata5: SATA link down (SStatus 0 SControl 300)
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI Host Controller
-usb usb7: Manufacturer: Linux 2.6.30-bpo.1-amd64 ohci_hcd
+usb usb7: Manufacturer: Linux 2.6.32-bpo.5-amd64 ohci_hcd
usb usb7: SerialNumber: 0000:00:14.5
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
+ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
+ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
+firewire_core: created device fw0: GUID 008f13005f320800, S400
+ata3.00: ATA-8: ST31000340NS, SN06, max UDMA/133
+ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
+ata4.00: ATA-8: ST31000340NS, SN16, max UDMA/133
+ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
+ata2.01: ATAPI: CDU5211, YYS7, max UDMA/33
+ata2.01: configured for UDMA/33
+scsi 1:0:1:0: CD-ROM SONY CD-ROM CDU5211 YYS7 PQ: 0 ANSI: 5
+ata3.00: configured for UDMA/133
+ata4.00: configured for UDMA/133
+scsi 2:0:0:0: Direct-Access ATA ST31000340NS SN06 PQ: 0 ANSI: 5
+scsi 3:0:0:0: Direct-Access ATA ST31000340NS SN16 PQ: 0 ANSI: 5
+sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
+sd 2:0:0:0: [sda] Write Protect is off
+sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
+sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
+ sda:
+sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
+sd 3:0:0:0: [sdb] Write Protect is off
+sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
+sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
+ sdb: sda1 sda2 sda3 sda4 < sdb1 sdb2 sdb3 sdb4 < sda5 sdb5 sda6
+usb 6-3: new low speed USB device using ohci_hcd and address 2
+ sdb6 sda7 sdb7 sda8 sdb8 sda9 >
+sd 2:0:0:0: [sda] Attached SCSI disk
+ sdb9 >
+sd 3:0:0:0: [sdb] Attached SCSI disk
+sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
+Uniform CD-ROM driver Revision: 3.20
+sr 1:0:1:0: Attached scsi CD-ROM sr0
+sr 1:0:1:0: Attached scsi generic sg0 type 5
+sd 2:0:0:0: Attached scsi generic sg1 type 0
+sd 3:0:0:0: Attached scsi generic sg2 type 0
+usb 6-3: New USB device found, idVendor=0518, idProduct=0001
+usb 6-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
+usb 6-3: Product: PS2 to USB Converter
+usb 6-3: Manufacturer: CHESEN
+usb 6-3: configuration #1 chosen from 1 choice
+usbcore: registered new interface driver hiddev
+input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.0/input/input1
+generic-usb 0003:0518:0001.0001: input,hidraw0: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:13.1-3/input0
+input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.1/input/input2
+generic-usb 0003:0518:0001.0002: input,hidraw1: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:13.1-3/input1
+usbcore: registered new interface driver usbhid
+usbhid: v2.6:USB HID core driver
md: raid1 personality registered for level 1
md: md2 stopped.
md: bind<sdb2>
md: bind<sda2>
raid1: raid set md2 active with 2 out of 2 mirrors
+md2: detected capacity change from 0 to 5000855552
md2: unknown partition table
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
-usb 6-3: new low speed USB device using ohci_hcd and address 2
-usb 6-3: New USB device found, idVendor=0518, idProduct=0001
-usb 6-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
-usb 6-3: Product: PS2 to USB Converter
-usb 6-3: Manufacturer: CHESEN
-usb 6-3: configuration #1 chosen from 1 choice
udevd version 125 started
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
-ACPI: WMI: Mapper loaded
-processor ACPI_CPU:00: registered as cooling_device0
-ACPI: Processor [P001] (supports 8 throttling states)
-processor ACPI_CPU:01: registered as cooling_device1
-processor ACPI_CPU:02: registered as cooling_device2
-input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
-ACPI: Power Button [PWRF]
-input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
+input: PC Speaker as /devices/platform/pcspkr/input/input3
+ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SOR1 [0xb00-0xb0f]
+ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
+EDAC MC: Ver: 2.1.0 Jun 11 2010
+EDAC amd64_edac: Ver: 3.2.0 Jun 11 2010
+EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
+EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
+ Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
+ (Note that use of the override may cause unknown side effects.)
+amd64_edac: probe of 0000:00:18.2 failed with error -22
+processor LNXCPU:00: registered as cooling_device0
+processor LNXCPU:01: registered as cooling_device1
+processor LNXCPU:02: registered as cooling_device2
+input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
ACPI: Power Button [PWRB]
-piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
-usbcore: registered new interface driver hiddev
-input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.0/input/input3
-generic-usb 0003:0518:0001.0001: input,hidraw0: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:13.1-3/input0
-input: PC Speaker as /devices/platform/pcspkr/input/input4
-input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.1/input/input5
-generic-usb 0003:0518:0001.0002: input,hidraw1: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:13.1-3/input1
-usbcore: registered new interface driver usbhid
-usbhid: v2.6:USB HID core driver
+input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
+ACPI: Power Button [PWRF]
HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
-hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
+hda_codec: ALC888: BIOS auto-probing.
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input6
EXT3 FS on md2, internal journal
loop: module loaded
@@ -652,82 +671,59 @@
md: bind<sdb1>
md: bind<sda1>
raid1: raid set md1 active with 2 out of 2 mirrors
+md1: detected capacity change from 0 to 501612544
md: md3 stopped.
md1: unknown partition table
md: bind<sdb3>
md: bind<sda3>
raid1: raid set md3 active with 2 out of 2 mirrors
+md3: detected capacity change from 0 to 8003125248
md: md5 stopped.
md3: unknown partition table
md: bind<sdb5>
md: bind<sda5>
raid1: raid set md5 active with 2 out of 2 mirrors
+md5: detected capacity change from 0 to 15998058496
md: md6 stopped.
md5: unknown partition table
md: bind<sdb6>
md: bind<sda6>
raid1: raid set md6 active with 2 out of 2 mirrors
+md6: detected capacity change from 0 to 31996182528
md: md7 stopped.
md6: unknown partition table
md: bind<sdb7>
md: bind<sda7>
raid1: raid set md7 active with 2 out of 2 mirrors
+md7: detected capacity change from 0 to 64000753664
md: md8 stopped.
md7: unknown partition table
md: bind<sdb8>
md: bind<sda8>
raid1: raid set md8 active with 2 out of 2 mirrors
+md8: detected capacity change from 0 to 64000753664
md: md9 stopped.
md8: unknown partition table
md: bind<sdb9>
md: bind<sda9>
raid1: raid set md9 active with 2 out of 2 mirrors
+md9: detected capacity change from 0 to 810699915264
md9: unknown partition table
kjournald starting. Commit interval 5 seconds
EXT3 FS on md1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
-EXT4-fs: barriers enabled
-kjournald2 starting: pid 2145, dev md8:8, commit interval 5 seconds
-EXT4 FS on md8, internal journal on md8:8
-EXT4-fs: delayed allocation enabled
-EXT4-fs: file extents enabled
-EXT4-fs: mballoc enabled
-EXT4-fs: mounted filesystem md8 with ordered data mode
-EXT4-fs: barriers enabled
-kjournald2 starting: pid 2146, dev md5:8, commit interval 5 seconds
-EXT4 FS on md5, internal journal on md5:8
-EXT4-fs: delayed allocation enabled
-EXT4-fs: file extents enabled
-EXT4-fs: mballoc enabled
-EXT4-fs: mounted filesystem md5 with ordered data mode
-EXT4-fs: barriers enabled
-kjournald2 starting: pid 2147, dev md6:8, commit interval 5 seconds
-EXT4 FS on md6, internal journal on md6:8
-EXT4-fs: delayed allocation enabled
-EXT4-fs: file extents enabled
-EXT4-fs: mballoc enabled
-EXT4-fs: mounted filesystem md6 with ordered data mode
-EXT4-fs: barriers enabled
-kjournald2 starting: pid 2148, dev md7:8, commit interval 5 seconds
-EXT4 FS on md7, internal journal on md7:8
-EXT4-fs: delayed allocation enabled
-EXT4-fs: file extents enabled
-EXT4-fs: mballoc enabled
-EXT4-fs: mounted filesystem md7 with ordered data mode
-EXT4-fs: barriers enabled
-kjournald2 starting: pid 2149, dev md9:8, commit interval 5 seconds
-EXT4 FS on md9, internal journal on md9:8
-EXT4-fs: delayed allocation enabled
-EXT4-fs: file extents enabled
-EXT4-fs: mballoc enabled
-EXT4-fs: mounted filesystem md9 with ordered data mode
+EXT4-fs (md8): mounted filesystem with ordered data mode
+EXT4-fs (md5): mounted filesystem with ordered data mode
+EXT4-fs (md6): mounted filesystem with ordered data mode
+EXT4-fs (md7): mounted filesystem with ordered data mode
+EXT4-fs (md9): mounted filesystem with ordered data mode
Adding 7815544k swap on /dev/md3. Priority:-1 extents:1 across:7815544k
-eth0: link up
-eth0: link up
-no IPv6 routers present
+eth0: link down
+eth0: link down
+eth0: link is not ready
Found 1 AMD Phenom(tm) II X3 705e Processor processors (3 cpu cores) (version 2.20.00)
Bug]: powernow-k8: No compatible ACPI _PSS objects found.
Bug]: powernow-k8: Try again with latest BIOS.
driver loaded but no devices found
user-space parallel port driver
-`ntpd' uses 32-bit capabilities (legacy support in use)
+
Reply to: