Bug#596453: 855GM: X hard locks system on startup
Package: linux-image-2.6.32-5-686
Version: 2.6.32-21
Severity: grave
Hi,
Blacklisting the 855GM from KMS in 2.6.32-21 to fix bugs like 582105 seems to be causing my system to hard lock when X starts up. Magic sysrq key does nothing, and of course the 855GM being totally blacklisted means modeset=1 is powerless.
I'm running squeeze on an IBM thinkpad R50e.
In 2.6.32-20 the kernel boots with KMS and then goes through to bring X up properly. 2.6.32-21 brings the kernel up in vga mode and causes a black screen and a hard lock when kdm is started.
Attached is lspci -vv output and a dmesg. Both taken when running 2.6.32-20 with X working. I'm unsure what information will be useful from a -21 system, as the hardlock means it's hard for me to get information once something interesting graphics related has happened. The Xorg log shows nothing interesting.
Please tell me if more information is required.
robert.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-20) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-2) ) #1 SMP Thu Aug 12 13:38:27 UTC 2010
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000004f6e0000 (usable)
[ 0.000000] BIOS-e820: 000000004f6e0000 - 000000004f6f7000 (ACPI data)
[ 0.000000] BIOS-e820: 000000004f6f7000 - 000000004f6f9000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000004f700000 - 0000000050000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x4f6e0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DBFFF uncachable
[ 0.000000] DC000-DFFFF write-back
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 040000000 mask FF0000000 write-back
[ 0.000000] 2 base 04FF00000 mask FFFF00000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037000000 page 2M
[ 0.000000] 0037000000 - 00373fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 7000-d000
[ 0.000000] RAMDISK: 377eb000 - 37fef0d7
[ 0.000000] Allocated new RAMDISK: 00100000 - 009040d7
[ 0.000000] Move RAMDISK from 00000000377eb000 - 0000000037fef0d6 to 00100000 - 009040d6
[ 0.000000] ACPI: RSDP 000f6e40 00024 (v02 IBM )
[ 0.000000] ACPI: XSDT 4f6ef33d 0004C (v01 IBM TP-1W 00002080 LTP 00000000)
[ 0.000000] ACPI: FACP 4f6ef400 000F4 (v03 IBM TP-1W 00002080 IBM 00000001)
[ 0.000000] ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20090903/tbfadt-526)
[ 0.000000] ACPI Warning: Optional field Gpe1Block has zero address or length: 000000000000102C/0 (20090903/tbfadt-557)
[ 0.000000] ACPI: DSDT 4f6ef5e7 07865 (v01 IBM TP-1W 00002080 MSFT 0100000E)
[ 0.000000] ACPI: FACS 4f6f8000 00040
[ 0.000000] ACPI: SSDT 4f6ef5b4 00033 (v01 IBM TP-1W 00002080 MSFT 0100000E)
[ 0.000000] ACPI: ECDT 4f6f6e4c 00052 (v01 IBM TP-1W 00002080 IBM 00000001)
[ 0.000000] ACPI: TCPA 4f6f6e9e 00032 (v01 IBM TP-1W 00002080 PTL 00000001)
[ 0.000000] ACPI: BOOT 4f6f6fd8 00028 (v01 IBM TP-1W 00002080 LTP 00000001)
[ 0.000000] 386MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 0 - 373fe000
[ 0.000000] node 0 low ram: 00000000 - 373fe000
[ 0.000000] node 0 bootmap 00009000 - 0000fe80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014c6b94] TEXT DATA BSS ==> [0001000000 - 00014c6b94]
[ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
[ 0.000000] #5 [00014c7000 - 00014cd128] BRK ==> [00014c7000 - 00014cd128]
[ 0.000000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
[ 0.000000] #7 [0000100000 - 00009040d7] NEW RAMDISK ==> [0000100000 - 00009040d7]
[ 0.000000] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0004f6e0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0004f6e0
[ 0.000000] On node 0 totalpages: 325247
[ 0.000000] free_area_init_node: node 0, pgdat c13b26e0, node_mem_map c14cf000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3967 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 774 pages used for memmap
[ 0.000000] HighMem zone: 98268 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 50000000:af800000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2000000 s34328 r0 d23016 u4194304
[ 0.000000] pcpu-alloc: s34328 r0 d23016 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 322705
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=99005700-4148-4c8f-b292-063d21c30cf2 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000373fe:0004f6e0)
[ 0.000000] Memory: 1275760k/1301376k available (2496k kernel code, 24216k reserved, 1328k data, 368k init, 396168k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.000000] .init : 0xc13bd000 - 0xc1419000 ( 368 kB)
[ 0.000000] .data : 0xc1270005 - 0xc13bc260 (1328 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1270005 (2496 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1398.779 MHz processor.
[ 0.008010] Calibrating delay loop (skipped), value calculated using timer frequency.. 2797.55 BogoMIPS (lpj=5595116)
[ 0.008045] Security Framework initialized
[ 0.008057] SELinux: Disabled at boot.
[ 0.008069] Mount-cache hash table entries: 512
[ 0.012068] Initializing cgroup subsys ns
[ 0.012075] Initializing cgroup subsys cpuacct
[ 0.012080] Initializing cgroup subsys devices
[ 0.012084] Initializing cgroup subsys freezer
[ 0.012087] Initializing cgroup subsys net_cls
[ 0.012124] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.012128] CPU: L2 cache: 1024K
[ 0.012135] mce: CPU supports 5 MCE banks
[ 0.012161] Performance Events:
[ 0.012165] no APIC, boot with the "lapic" boot parameter to force-enable it.
[ 0.012168] no hardware sampling interrupt available.
[ 0.012170] p6 PMU driver.
[ 0.012177] ... version: 0
[ 0.012179] ... bit width: 32
[ 0.012182] ... generic registers: 2
[ 0.012184] ... value mask: 00000000ffffffff
[ 0.012187] ... max period: 000000007fffffff
[ 0.012190] ... fixed-purpose events: 0
[ 0.012192] ... event mask: 0000000000000003
[ 0.012199] Checking 'hlt' instruction... OK.
[ 0.028510] SMP alternatives: switching to UP code
[ 0.033238] Freeing SMP alternatives: 13k freed
[ 0.033249] ACPI: Core revision 20090903
[ 0.049006] ACPI: setting ELCR to 0200 (from 0800)
[ 0.052084] Enabling APIC mode: Flat. Using 0 I/O APICs
[ 0.052088] weird, boot CPU (#0) not listed by the BIOS.
[ 0.052091] SMP motherboard not detected.
[ 0.052094] Local APIC not detected. Using dummy APIC emulation.
[ 0.052097] SMP disabled
[ 0.052363] Brought up 1 CPUs
[ 0.052367] Total of 1 processors activated (2797.55 BogoMIPS).
[ 0.056052] CPU0 attaching NULL sched-domain.
[ 0.056198] devtmpfs: initialized
[ 0.056726] regulator: core version 0.5
[ 0.056790] NET: Registered protocol family 16
[ 0.056908] ACPI: bus type pci registered
[ 0.057146] PCI: PCI BIOS revision 2.10 entry at 0xfd8c6, last bus=5
[ 0.057149] PCI: Using configuration type 1 for base access
[ 0.057627] bio: create slab <bio-0> at 0
[ 0.058599] ACPI: EC: EC description table is found, configuring boot EC
[ 0.065415] ACPI: Interpreter enabled
[ 0.065415] ACPI: (supports S0 S3 S4 S5)
[ 0.065415] ACPI: Using PIC for interrupt routing
[ 0.072812] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.072862] ACPI: Power Resource [PUBS] (on)
[ 0.072862] ACPI: No dock devices found.
[ 0.072862] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.072862] pci 0000:00:02.0: reg 10 32bit mmio pref: [0xe0000000-0xe7ffffff]
[ 0.072862] pci 0000:00:02.0: reg 14 32bit mmio: [0xd0000000-0xd007ffff]
[ 0.072862] pci 0000:00:02.0: reg 18 io port: [0x1800-0x1807]
[ 0.072862] pci 0000:00:02.0: supports D1
[ 0.072862] pci 0000:00:02.1: reg 10 32bit mmio pref: [0xe8000000-0xefffffff]
[ 0.072862] pci 0000:00:02.1: reg 14 32bit mmio: [0xd0080000-0xd00fffff]
[ 0.072862] pci 0000:00:02.1: supports D1
[ 0.072862] pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f]
[ 0.072862] pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f]
[ 0.072862] pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f]
[ 0.072862] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd0100000-0xd01003ff]
[ 0.072862] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.072862] pci 0000:00:1d.7: PME# disabled
[ 0.072934] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[ 0.072939] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
[ 0.072963] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.072971] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.072979] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.072987] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.072995] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f]
[ 0.073003] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
[ 0.073053] pci 0000:00:1f.3: reg 20 io port: [0x1880-0x189f]
[ 0.073096] pci 0000:00:1f.5: reg 10 io port: [0x1c00-0x1cff]
[ 0.073103] pci 0000:00:1f.5: reg 14 io port: [0x18c0-0x18ff]
[ 0.073111] pci 0000:00:1f.5: reg 18 32bit mmio: [0xd0100c00-0xd0100dff]
[ 0.073119] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xd0100800-0xd01008ff]
[ 0.073147] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ 0.073152] pci 0000:00:1f.5: PME# disabled
[ 0.073183] pci 0000:00:1f.6: reg 10 io port: [0x2400-0x24ff]
[ 0.073190] pci 0000:00:1f.6: reg 14 io port: [0x2000-0x207f]
[ 0.073225] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.073231] pci 0000:00:1f.6: PME# disabled
[ 0.073270] pci 0000:02:00.0: reg 10 32bit mmio: [0xb0000000-0xb0000fff]
[ 0.073288] pci 0000:02:00.0: supports D1 D2
[ 0.073292] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.073297] pci 0000:02:00.0: PME# disabled
[ 0.073338] pci 0000:02:08.0: reg 10 32bit mmio: [0xd0200000-0xd0200fff]
[ 0.073346] pci 0000:02:08.0: reg 14 io port: [0x7000-0x703f]
[ 0.073381] pci 0000:02:08.0: supports D1 D2
[ 0.073385] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.073390] pci 0000:02:08.0: PME# disabled
[ 0.073422] pci 0000:00:1e.0: transparent bridge
[ 0.073428] pci 0000:00:1e.0: bridge io port: [0x3000-0x7fff]
[ 0.073434] pci 0000:00:1e.0: bridge 32bit mmio: [0xd0200000-0xdfffffff]
[ 0.073440] pci 0000:00:1e.0: bridge 32bit mmio pref: [0xf0000000-0xf7ffffff]
[ 0.073464] pci_bus 0000:00: on NUMA node 0
[ 0.073471] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.073564] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.079440] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.079655] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.079868] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.080091] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.080303] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.080493] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.080683] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.080897] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.081051] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.081061] vgaarb: loaded
[ 0.081139] PCI: Using ACPI for IRQ routing
[ 0.081407] Switching to clocksource tsc
[ 0.083243] pnp: PnP ACPI init
[ 0.083262] ACPI: bus type pnp registered
[ 0.084257] pnp: PnP ACPI: found 10 devices
[ 0.084260] ACPI: ACPI bus type pnp unregistered
[ 0.084265] PnPBIOS: Disabled by ACPI PNP
[ 0.084279] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.084285] system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
[ 0.084289] system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
[ 0.084294] system 00:00: iomem range 0xc8000-0xcbfff has been reserved
[ 0.084299] system 00:00: iomem range 0xcc000-0xcffff could not be reserved
[ 0.084304] system 00:00: iomem range 0xdc000-0xdffff could not be reserved
[ 0.084309] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
[ 0.084314] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
[ 0.084318] system 00:00: iomem range 0xe8000-0xebfff could not be reserved
[ 0.084323] system 00:00: iomem range 0xec000-0xeffff could not be reserved
[ 0.084328] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
[ 0.084333] system 00:00: iomem range 0x100000-0x4fffffff could not be reserved
[ 0.084338] system 00:00: iomem range 0xfec00000-0xffffffff could not be reserved
[ 0.084348] system 00:02: ioport range 0x1000-0x107f has been reserved
[ 0.084353] system 00:02: ioport range 0x1180-0x11bf has been reserved
[ 0.084357] system 00:02: ioport range 0x15e0-0x15ef has been reserved
[ 0.084362] system 00:02: ioport range 0x1600-0x167f has been reserved
[ 0.119146] pci 0000:02:00.0: CardBus bridge, secondary bus 0000:03
[ 0.119151] pci 0000:02:00.0: IO window: 0x003000-0x0030ff
[ 0.119157] pci 0000:02:00.0: IO window: 0x003400-0x0034ff
[ 0.119162] pci 0000:02:00.0: PREFETCH window: 0xf0000000-0xf3ffffff
[ 0.119168] pci 0000:02:00.0: MEM window: 0xd4000000-0xd7ffffff
[ 0.119174] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.119179] pci 0000:00:1e.0: IO window: 0x3000-0x7fff
[ 0.119186] pci 0000:00:1e.0: MEM window: 0xd0200000-0xdfffffff
[ 0.119192] pci 0000:00:1e.0: PREFETCH window: 0xf0000000-0xf7ffffff
[ 0.119208] pci 0000:00:1e.0: setting latency timer to 64
[ 0.119592] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 0.119596] PCI: setting IRQ 11 as level-triggered
[ 0.119603] pci 0000:02:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 0.119611] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.119615] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.119620] pci_bus 0000:02: resource 0 io: [0x3000-0x7fff]
[ 0.119624] pci_bus 0000:02: resource 1 mem: [0xd0200000-0xdfffffff]
[ 0.119628] pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf7ffffff]
[ 0.119632] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.119636] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[ 0.119640] pci_bus 0000:03: resource 0 io: [0x3000-0x30ff]
[ 0.119644] pci_bus 0000:03: resource 1 io: [0x3400-0x34ff]
[ 0.119648] pci_bus 0000:03: resource 2 pref mem [0xf0000000-0xf3ffffff]
[ 0.119652] pci_bus 0000:03: resource 3 mem: [0xd4000000-0xd7ffffff]
[ 0.119697] NET: Registered protocol family 2
[ 0.119809] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.120217] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.121794] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.122945] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.122951] TCP reno registered
[ 0.123141] NET: Registered protocol family 1
[ 0.123182] pci 0000:00:02.0: Boot video device
[ 0.123282] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
[ 0.123366] Unpacking initramfs...
[ 0.482419] Freeing initrd memory: 8208k freed
[ 0.490926] Simple Boot Flag at 0x35 set to 0x1
[ 0.491297] audit: initializing netlink socket (disabled)
[ 0.491324] type=2000 audit(1284221256.490:1): initialized
[ 0.497360] highmem bounce pool size: 64 pages
[ 0.497368] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.499386] VFS: Disk quotas dquot_6.5.2
[ 0.499472] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.499574] msgmni has been set to 1735
[ 0.499839] alg: No test for stdrng (krng)
[ 0.499913] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.499918] io scheduler noop registered
[ 0.499921] io scheduler anticipatory registered
[ 0.499924] io scheduler deadline registered
[ 0.499971] io scheduler cfq registered (default)
[ 0.500187] isapnp: Scanning for PnP cards...
[ 0.852948] isapnp: No Plug & Play device found
[ 0.854734] Linux agpgart interface v0.103
[ 0.854827] agpgart-intel 0000:00:00.0: Intel 855GM Chipset
[ 0.855366] agpgart-intel 0000:00:00.0: detected 8060K stolen memory
[ 0.857120] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe0000000
[ 0.857213] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.858029] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 0.858036] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 0.858044] serial 0000:00:1f.6: PCI INT B disabled
[ 0.858160] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.865072] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.865084] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.865214] mice: PS/2 mouse device common for all mice
[ 0.865269] rtc_cmos 00:06: RTC can wake from S4
[ 0.865318] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.865338] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 0.865351] cpuidle: using governor ladder
[ 0.865354] cpuidle: using governor menu
[ 0.865360] No iBFT detected.
[ 0.865824] TCP cubic registered
[ 0.866017] NET: Registered protocol family 10
[ 0.866625] lo: Disabled Privacy Extensions
[ 0.867034] Mobile IPv6
[ 0.867038] NET: Registered protocol family 17
[ 0.867057] Using IPI No-Shortcut mode
[ 0.867143] PM: Resume from disk failed.
[ 0.867159] registered taskstats version 1
[ 0.867395] rtc_cmos 00:06: setting system clock to 2010-09-11 16:07:37 UTC (1284221257)
[ 0.867430] Initalizing network drop monitor service
[ 0.867463] Freeing unused kernel memory: 368k freed
[ 0.867721] Write protecting the kernel text: 2500k
[ 0.867749] Write protecting the kernel read-only data: 920k
[ 0.870322] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.890884] udev: starting version 160
[ 1.146620] usbcore: registered new interface driver usbfs
[ 1.146818] usbcore: registered new interface driver hub
[ 1.146995] usbcore: registered new device driver usb
[ 1.151929] SCSI subsystem initialized
[ 1.188903] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.189155] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 1.189579] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 1.189966] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[ 1.189972] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11
[ 1.189997] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.190002] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.190048] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.190084] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.193974] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.201149] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 1.201153] e100: Copyright(c) 1999-2006 Intel Corporation
[ 1.201870] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
[ 1.201876] e100 0000:02:08.0: PCI INT A -> Link[LNKE] -> GSI 11 (level, low) -> IRQ 11
[ 1.224582] e100 0000:02:08.0: PME# disabled
[ 1.224626] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xd0100000
[ 1.229358] libata version 3.00 loaded.
[ 1.234446] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.234459] ACPI: Thermal Zone [THM0] (59 C)
[ 1.238047] e100: eth0: e100_probe: addr 0xd0200000, irq 11, MAC addr 00:0a:e4:c4:14:a5
[ 1.248024] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.248080] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.248084] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.248089] usb usb1: Product: EHCI Host Controller
[ 1.248092] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 1.248095] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.248215] usb usb1: configuration #1 chosen from 1 choice
[ 1.248259] hub 1-0:1.0: USB hub found
[ 1.248271] hub 1-0:1.0: 6 ports detected
[ 1.251606] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.251682] ata_piix 0000:00:1f.1: version 2.13
[ 1.251698] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[ 1.252187] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 1.252193] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 1.252244] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.253030] scsi0 : ata_piix
[ 1.253217] scsi1 : ata_piix
[ 1.254024] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 1.254028] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 1.254561] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 1.254774] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 1.254783] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 1.254792] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.254797] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.254822] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.254850] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001820
[ 1.254903] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.254907] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.254911] usb usb2: Product: UHCI Host Controller
[ 1.254914] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.254917] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.255029] usb usb2: configuration #1 chosen from 1 choice
[ 1.255074] hub 2-0:1.0: USB hub found
[ 1.255084] hub 2-0:1.0: 2 ports detected
[ 1.255352] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[ 1.255495] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[ 1.255864] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 1.255870] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 1.255879] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.255883] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.255896] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.255919] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001840
[ 1.255960] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.255964] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.255968] usb usb3: Product: UHCI Host Controller
[ 1.255972] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.255975] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.256143] usb usb3: configuration #1 chosen from 1 choice
[ 1.256230] hub 3-0:1.0: USB hub found
[ 1.256240] hub 3-0:1.0: 2 ports detected
[ 1.256298] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 1.256308] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.256313] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.256322] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.256345] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001860
[ 1.256386] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.256390] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.256394] usb usb4: Product: UHCI Host Controller
[ 1.256397] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.256400] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.256525] usb usb4: configuration #1 chosen from 1 choice
[ 1.256620] hub 4-0:1.0: USB hub found
[ 1.256629] hub 4-0:1.0: 2 ports detected
[ 1.416548] ata2.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4244N, 1.02, max UDMA/33
[ 1.416993] ata1.00: ATA-6: HTS541040G9AT00, MB2IA60A, max UDMA/100
[ 1.416998] ata1.00: 78140160 sectors, multi 16: LBA
[ 1.432343] ata2.00: configured for UDMA/33
[ 1.432738] ata1.00: configured for UDMA/100
[ 1.432914] scsi 0:0:0:0: Direct-Access ATA HTS541040G9AT00 MB2I PQ: 0 ANSI: 5
[ 1.437578] scsi 1:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4244N 1.02 PQ: 0 ANSI: 5
[ 1.465340] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
[ 1.465417] sd 0:0:0:0: [sda] Write Protect is off
[ 1.465421] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.465453] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.465647] sda:sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 1.477475] Uniform CD-ROM driver Revision: 3.20
[ 1.477836] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.491043] sda1 sda2 sda3 < sda5 sda6 >
[ 1.552988] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.562234] usb 1-3: new high speed USB device using ehci_hcd and address 2
[ 1.569121] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.569610] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.694346] usb 1-3: New USB device found, idVendor=7392, idProduct=7811
[ 1.694353] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.694357] usb 1-3: Product: 802.11n WLAN Adapter
[ 1.694361] usb 1-3: Manufacturer: Realtek
[ 1.694364] usb 1-3: SerialNumber: 00e04c000001
[ 1.694518] usb 1-3: configuration #1 chosen from 1 choice
[ 2.031034] PM: Starting manual resume from disk
[ 2.031040] PM: Resume from partition 8:2
[ 2.031042] PM: Checking hibernation image.
[ 2.031262] PM: Error -22 checking image file
[ 2.031265] PM: Resume from disk failed.
[ 2.056984] kjournald starting. Commit interval 5 seconds
[ 2.056997] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.323258] udev: starting version 160
[ 4.810145] Non-volatile memory driver v1.3
[ 5.200178] ACPI: AC Adapter [AC] (on-line)
[ 5.215575] ACPI: Battery Slot [BAT0] (battery present)
[ 5.315639] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 5.316238] ACPI: Lid Switch [LID]
[ 5.316712] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 5.316723] ACPI: Sleep Button [SLPB]
[ 5.317148] Marking TSC unstable due to TSC halts in idle
[ 5.318386] processor LNXCPU:00: registered as cooling_device0
[ 5.318730] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 5.318737] ACPI: Power Button [PWRF]
[ 5.318977] intel_rng: FWH not detected
[ 5.324708] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input4
[ 5.324721] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 5.324945] Switching to clocksource acpi_pm
[ 5.895394] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 5.912835] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 5.955143] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.975159] parport_pc 00:09: reported by Plug and Play ACPI
[ 5.975202] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
[ 6.345193] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 6.359537] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input6
[ 6.598774] i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 6.602436] thinkpad_acpi: ThinkPad ACPI Extras v0.23
[ 6.602440] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 6.602444] thinkpad_acpi: ThinkPad BIOS 1WET88WW (2.08 ), EC 1VHT28WW-1.04
[ 6.602447] thinkpad_acpi: IBM ThinkPad R50e, model 1834S3G
[ 6.602451] thinkpad_acpi: WARNING: Outdated ThinkPad BIOS/EC firmware
[ 6.602454] thinkpad_acpi: WARNING: This firmware may be missing critical bug fixes and/or important features
[ 6.609833] Registered led device: tpacpi::thinklight
[ 6.610090] Registered led device: tpacpi::power
[ 6.610319] Registered led device: tpacpi::standby
[ 6.612308] thinkpad_acpi: brightness: will use unverified default: brightness_mode=3
[ 6.612313] thinkpad_acpi: brightness: please report to ibm-acpi-devel@lists.sourceforge.net whether it works well or not on your ThinkPad
[ 6.615715] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
[ 6.698694] [drm] Initialized drm 1.1.0 20060810
[ 7.144538] yenta_cardbus 0000:02:00.0: CardBus bridge found [1014:0512]
[ 7.144558] yenta_cardbus 0000:02:00.0: Using INTVAL to route CSC interrupts to PCI
[ 7.144562] yenta_cardbus 0000:02:00.0: Routing CardBus interrupts to PCI
[ 7.144568] yenta_cardbus 0000:02:00.0: TI: mfunc 0x01d21022, devctl 0x64
[ 7.376831] yenta_cardbus 0000:02:00.0: ISA IRQ mask 0x0478, PCI irq 11
[ 7.376837] yenta_cardbus 0000:02:00.0: Socket status: 30000007
[ 7.376850] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x7fff
[ 7.376855] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x7fff: clean.
[ 7.378401] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xdfffffff
[ 7.378406] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf7ffffff
[ 7.518331] i915 0000:00:02.0: power state changed by ACPI to D0
[ 7.518380] i915 0000:00:02.0: power state changed by ACPI to D0
[ 7.518391] i915 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 7.518399] i915 0000:00:02.0: setting latency timer to 64
[ 7.529070] [drm] set up 7M of stolen space
[ 7.564909] [drm] initialized overlay support
[ 7.891207] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 7.892091] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 7.892476] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 7.892796] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 7.893276] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 8.651196] Console: switching to colour frame buffer device 128x48
[ 8.658365] fb0: inteldrmfb frame buffer device
[ 8.658368] registered panic notifier
[ 8.658380] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 8.658446] Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 8.658471] Intel ICH Modem 0000:00:1f.6: setting latency timer to 64
[ 8.760170] MC'97 1 converters and GPIO not ready (0xff00)
[ 8.761236] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 8.761268] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 9.684043] intel8x0_measure_ac97_clock: measured 55317 usecs (2665 samples)
[ 9.684048] intel8x0: clocking to 48000
[ 10.407410] Adding 979956k swap on /dev/sda2. Priority:-1 extents:1 across:979956k
[ 10.747318] EXT3 FS on sda1, internal journal
[ 11.008625] Uniform Multi-Platform E-IDE driver
[ 11.019803] ide-cd driver 5.00
[ 11.028563] ide-gd driver 1.18
[ 11.032392] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[ 11.118859] device-mapper: uevent: version 1.0.3
[ 11.119623] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 12.373842] fuse init (API version 7.13)
[ 12.622617] kjournald starting. Commit interval 5 seconds
[ 12.622897] EXT3 FS on sda5, internal journal
[ 12.622904] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.654607] kjournald starting. Commit interval 5 seconds
[ 12.654919] EXT3 FS on sda6, internal journal
[ 12.654925] EXT3-fs: mounted filesystem with ordered data mode.
[ 16.114762] IBM machine detected. Enabling interrupts during APM calls.
[ 16.114766] apm: BIOS not found.
[ 20.275116] input: /usr/sbin/thinkpad-keys as /devices/virtual/input/input8
[ 31.305216] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 31.308173] e100: eth0 NIC Link is Up 100 Mbps Full Duplex
[ 31.308592] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 31.318492] lp0: using parport0 (interrupt-driven).
[ 31.340194] ppdev: user-space parallel port driver
[ 41.564030] eth0: no IPv6 routers present
00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
Subsystem: IBM ThinkPad R50e
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at <unassigned> (32-bit, prefetchable)
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:00.1 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
Subsystem: IBM ThinkPad R50e
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.3 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
Subsystem: IBM ThinkPad R50e
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02) (prog-if 00 [VGA controller])
Subsystem: IBM ThinkPad R50e
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at d0000000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at 1800 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
Subsystem: IBM ThinkPad R50e
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at d0080000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI])
Subsystem: IBM ThinkPad
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports at 1820 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI])
Subsystem: IBM ThinkPad
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at 1840 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI])
Subsystem: IBM ThinkPad
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 11
Region 4: I/O ports at 1860 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI])
Subsystem: IBM ThinkPad
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 11
Region 0: Memory at d0100000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 81) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=05, sec-latency=64
I/O behind bridge: 00003000-00007fff
Memory behind bridge: d0200000-dfffffff
Prefetchable memory behind bridge: f0000000-f7ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: IBM ThinkPad
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 1810 [size=16]
Region 5: Memory at 50000000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: ata_piix
00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 01)
Subsystem: IBM ThinkPad
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at 1880 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
Subsystem: IBM Thinkpad R50e model 1634
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 11
Region 0: I/O ports at 1c00 [size=256]
Region 1: I/O ports at 18c0 [size=64]
Region 2: Memory at d0100c00 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at d0100800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: Intel ICH
00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 01) (prog-if 00 [Generic])
Subsystem: IBM ThinkPad R50e
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 11
Region 0: I/O ports at 2400 [size=256]
Region 1: I/O ports at 2000 [size=128]
Capabilities: <access denied>
Kernel driver in use: Intel ICH Modem
02:00.0 CardBus bridge: Texas Instruments PCI1510 PC card Cardbus Controller
Subsystem: IBM ThinkPad R50e
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at b0000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=04, sec-latency=176
Memory window 0: f0000000-f3fff000 (prefetchable)
Memory window 1: d4000000-d7fff000
I/O window 0: 00003000-000030ff
I/O window 1: 00003400-000034ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
02:08.0 Ethernet controller: Intel Corporation 82801DB PRO/100 VE (MOB) Ethernet Controller (rev 81)
Subsystem: IBM ThinkPad R40
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 66 (2000ns min, 14000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d0200000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 7000 [size=64]
Capabilities: <access denied>
Kernel driver in use: e100
Reply to: