Bug#595502: closed by Ben Hutchings <ben@decadent.org.uk> (Re: Bug#595502: linux-image-2.6.32-5-mckinley: panics while loading INIT, IOMMU out of mapping resources)
reopen 595502
thanks
Version: 2.6.32-21
Please, explain to me how changing a Panic into a Warning without
effectively fixing the root cause of the bug "fixes" anything?
And, oh, if by "graceful failure" you mean: "it will blow up your raid
devices and kill your filesystems", then yes, the failure has been
very graceful for me, thankyouverymuch. I could have lived with a
little less gracefulness, though ;-/
Please find attached the dmesg pertaining to this wonderful disaster.
What it doesn't show is the fact that I also saw the endless
/sys/devices enumeration during this boot.
HTH
T-Bone
On Sun, Sep 5, 2010 at 2:30 AM, Debian Bug Tracking System
<owner@bugs.debian.org> wrote:
> This is an automatic notification regarding your Bug report
> which was filed against the linux-image-2.6.32-5-mckinley package:
>
> #595502: linux-image-2.6.32-5-mckinley: panics while loading INIT, IOMMU out of mapping resources
>
> It has been closed by Ben Hutchings <ben@decadent.org.uk>.
>
> Their explanation is attached below along with your original report.
> If this explanation is unsatisfactory and you have not received a
> better one in a separate message then please contact Ben Hutchings <ben@decadent.org.uk> by
> replying to this email.
>
>
> --
> 595502: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=595502
> Debian Bug Tracking System
> Contact owner@bugs.debian.org with problems
>
>
> ---------- Forwarded message ----------
> From: Ben Hutchings <ben@decadent.org.uk>
> To: 595502-done@bugs.debian.org
> Date: Sun, 05 Sep 2010 01:27:58 +0100
> Subject: Re: Bug#595502: linux-image-2.6.32-5-mckinley: panics while loading INIT, IOMMU out of mapping resources
> Version: 2.6.32-21
>
> On Sat, 2010-09-04 at 17:38 +0200, Thibaut VARÈNE wrote:
> [...]
>> [ 42.292720] Kernel panic - not syncing: /build/buildd-
>> linux-2.6_2.6.32-20-ia64-gv8uZV/linux-2.6-2.6.32/debian/build/
>> source_ia64_none/arch/ia64/hp/common/sba_iommu.c: I/O MMU @
>> c0000000fed01000 is out of mapping resources
>
> Stable kernel update 2.6.32.19, included in the above version, changes
> this panic to a warning and graceful failure.
>
> Ben.
>
> --
> Ben Hutchings
> Once a job is fouled up, anything done to improve it makes it worse.
>
>
> ---------- Forwarded message ----------
> From: "Thibaut VARÈNE" <varenet@debian.org>
> To: submit@bugs.debian.org
> Date: Sat, 4 Sep 2010 17:38:13 +0200
> Subject: linux-image-2.6.32-5-mckinley: panics while loading INIT, IOMMU out of mapping resources
> Package: linux-image-2.6.32-5-mckinley
> Version: 2.6.32-20
> Severity: grave
> Justification: renders system unusable
>
>
> System boots fine with linux-image-2.6.32-3-mckinley 2.6.32-9.
> Panics with 2.6.32-20 with: I/O MMU @ c0000000fed01000 is out of mapping resources
>
>
> Full boot log:
>
> Loading.: Debian GNU/Linux
> Starting: Debian GNU/Linux
> ELILO v3.12 for EFI/IA-64
> ..
> Uncompressing Linux... done
> Loading file \EFI\debian\initrd.img...done
> [ 0.000000] Initializing cgroup subsys cpuset
> [ 0.000000] Initializing cgroup subsys cpu
> [ 0.000000] Linux version 2.6.32-5-mckinley (Debian 2.6.32-20) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-2) ) #1 SMP Thu Aug 12 15:34:34 UTC 2010
> [ 0.000000] EFI v1.10 by HP: SALsystab=0x3fb38000 ACPI 2.0=0x3fb2e000 SMBIOS=0x3fb3a000 HCDP=0x3fb2c000
> [ 0.000000] booting generic kernel on platform hpzx1
> [ 0.000000] PCDP: v0 at 0x3fb2c000
> [ 0.000000] Early serial console at MMIO 0xff5e0000 (options '9600n8')
> [ 0.000000] bootconsole [uart8250] enabled
> [ 0.000000] ACPI: RSDP 000000003fb2e000 00028 (v02 HP)
> [ 0.000000] ACPI: XSDT 000000003fb2e02c 0007C (v01 HP zx2000 00000000 HP 00000000)
> [ 0.000000] ACPI: FACP 000000003fb373e0 000F4 (v03 HP zx2000 00000000 HP 00000000)
> [ 0.000000] ACPI Warning: 32/64X length mismatch in Gpe0Block: 32/16 (20090903/tbfadt-526)
> [ 0.000000] ACPI Warning: 32/64X length mismatch in Gpe1Block: 32/16 (20090903/tbfadt-526)
> [ 0.000000] ACPI: DSDT 000000003fb2e0e0 05781 (v01 HP zx2000 00000007 INTL 02012044)
> [ 0.000000] ACPI: FACS 000000003fb374d8 00040
> [ 0.000000] ACPI: SPCR 000000003fb37518 00050 (v01 HP zx2000 00000000 HP 00000000)
> [ 0.000000] ACPI: DBGP 000000003fb37568 00034 (v01 HP zx2000 00000000 HP 00000000)
> [ 0.000000] ACPI: APIC 000000003fb37628 00084 (v01 HP zx2000 00000000 HP 00000000)
> [ 0.000000] ACPI: SPMI 000000003fb375a0 00050 (v04 HP zx2000 00000000 HP 00000000)
> [ 0.000000] ACPI: CPEP 000000003fb375f0 00034 (v01 HP zx2000 00000000 HP 00000000)
> [ 0.000000] ACPI: SSDT 000000003fb33870 00A14 (v01 HP zx2000 00000006 INTL 02012044)
> [ 0.000000] ACPI: SSDT 000000003fb34290 022E2 (v01 HP zx2000 00000006 INTL 02012044)
> [ 0.000000] ACPI: SSDT 000000003fb36580 00342 (v01 HP zx2000 00000006 INTL 02012044)
> [ 0.000000] ACPI: SSDT 000000003fb368d0 00A16 (v01 HP zx2000 00000006 INTL 02012044)
> [ 0.000000] ACPI: SSDT 000000003fb372f0 000EB (v01 HP zx2000 00000006 INTL 02012044)
> [ 0.000000] ACPI: Local APIC address c0000000fee00000
> [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
> [ 0.000000] warning: skipping physical page 0
> [ 0.000000] warning: skipping physical page 0
> [ 0.000000] warning: skipping physical page 0
> [ 0.000000] warning: skipping physical page 0
> [ 0.000000] Initial ramdisk at: 0xe00000407df27000 (17221974 bytes)
> [ 0.000000] SAL 3.1: HP version 2.31
> [ 0.000000] SAL Platform features: None
> [ 0.000000] SAL: AP wakeup using external interrupt vector 0xff
> [ 0.000000] ACPI: Local APIC address c0000000fee00000
> [ 0.000000] GSI 47 (level, low) -> CPU 0 (0x0000) vector 48
> [ 0.000000] 1 CPUs available, 1 CPUs total
> [ 0.000000] MCA related initialization done
> [ 0.000000] warning: skipping physical page 0
> [ 0.000000] Virtual mem_map starts at 0xa0007fffc7900000
> [ 0.000000] Zone PFN ranges:
> [ 0.000000] DMA 0x00000001 -> 0x00040000
> [ 0.000000] Normal 0x00040000 -> 0x01020000
> [ 0.000000] Movable zone start PFN for each node
> [ 0.000000] early_node_map[5] active PFN ranges
> [ 0.000000] 0: 0x00000001 -> 0x0000fd79
> [ 0.000000] 0: 0x0000fec0 -> 0x0000fecb
> [ 0.000000] 0: 0x01010000 -> 0x0101ff5a
> [ 0.000000] 0: 0x0101ff69 -> 0x0101ff84
> [ 0.000000] 0: 0x0101ffa0 -> 0x0101fff2
> [ 0.000000] Built 1 zonelists in Node order, mobility grouping off. Total pages: 72586
> [ 0.000000] Policy zone: Normal
> [ 0.000000] Kernel command line: BOOT_IMAGE=atapi0:/EFI/debian/vmlinuz root=/dev/md1 ro
> [ 0.000000] PID hash table entries: 4096 (order: 1, 32768 bytes)
> [ 0.000000] Memory: 2046816k/2057056k available (7315k code, 39248k reserved, 3536k data, 736k init)
> [ 0.000000] Leaving McKinley Errata 9 workaround enabled
> [ 0.000000] SLUB: Genslabs=16, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=256
> [ 0.000000] Hierarchical RCU implementation.
> [ 0.000000] NR_IRQS:1024
> [ 0.000000] Console: colour dummy device 80x25
> [ 0.060000] Calibrating delay loop... 1347.58 BogoMIPS (lpj=2695168)
> [ 0.236063] Security Framework initialized
> [ 0.288011] SELinux: Disabled at boot.
> [ 0.340165] Dentry cache hash table entries: 262144 (order: 7, 2097152 bytes)
> [ 0.434371] Inode-cache hash table entries: 131072 (order: 6, 1048576 bytes)
> [ 0.529254] Mount-cache hash table entries: 1024
> [ 0.592420] Initializing cgroup subsys ns
> [ 0.644009] Initializing cgroup subsys cpuacct
> [ 0.704008] Initializing cgroup subsys devices
> [ 0.760006] Initializing cgroup subsys freezer
> [ 0.820005] Initializing cgroup subsys net_cls
> [ 0.876045] ACPI: Core revision 20090903
> [ 0.932000] Boot processor id 0x0/0x0
> [ 0.980131] Brought up 1 CPUs
> [ 1.020007] Total of 1 processors activated (1347.58 BogoMIPS).
> [ 1.100664] devtmpfs: initialized
> [ 1.144434] DMI 2.3 present.
> [ 1.180401] regulator: core version 0.5
> [ 1.232116] NET: Registered protocol family 16
> [ 1.292192] ACPI: bus type pci registered
> [ 1.344827] bio: create slab <bio-0> at 0
> [ 1.412398] ACPI: Interpreter enabled
> [ 1.460004] ACPI: (supports S0 S5)
> [ 1.504008] ACPI: Using IOSAPIC for interrupt routing
> [ 1.898452] ACPI: No dock devices found.
> [ 1.970016] ACPI: PCI Root Bridge [PCI0] (0000:00)
> [ 2.105853] ACPI: PCI Root Bridge [PCI4] (0000:80)
> [ 2.283204] ACPI: PCI Root Bridge [PCI5] (0000:a0)
> [ 2.400210] pci 0000:a0:01.0: PME# supported from D0 D1 D2 D3hot
> [ 2.476105] pci 0000:a0:01.0: PME# disabled
> [ 2.535156] pci 0000:a0:01.1: PME# supported from D0 D1 D2 D3hot
> [ 2.616105] pci 0000:a0:01.1: PME# disabled
> [ 2.675154] pci 0000:a0:01.2: PME# supported from D0 D1 D2 D3hot
> [ 2.752105] pci 0000:a0:01.2: PME# disabled
> [ 2.816901] pci 0000:a0:03.0: PME# supported from D0 D3hot D3cold
> [ 2.896105] pci 0000:a0:03.0: PME# disabled
> [ 2.958805] pci 0000:a0:04.1: PME# supported from D1 D3hot
> [ 3.028105] pci 0000:a0:04.1: PME# disabled
> [ 3.142301] ACPI: PCI Root Bridge [PCI6] (0000:c0)
> [ 3.259806] vgaarb: loaded
> [ 3.353418] IOC: zx1 2.3 HPA 0xfed01000 IOVA space 1024Mb at 0x40000000
> [ 3.561317] Switching to clocksource itc
> [ 3.612192] pnp: PnP ACPI init
> [ 3.656239] ACPI: bus type pnp registered
> [ 3.931304] GSI 45 (edge, high) -> CPU 0 (0x0000) vector 49
> [ 4.006446] GSI 46 (edge, high) -> CPU 0 (0x0000) vector 50
> [ 4.120393] pnp: PnP ACPI: found 8 devices
> [ 4.174298] ACPI: ACPI bus type pnp unregistered
> [ 4.235429] NET: Registered protocol family 2
> [ 4.292917] IP route cache hash table entries: 16384 (order: 3, 131072 bytes)
> [ 4.387626] TCP established hash table entries: 65536 (order: 6, 1048576 bytes)
> [ 4.485151] TCP bind hash table entries: 65536 (order: 6, 1048576 bytes)
> [ 4.574702] TCP: Hash tables configured (established 65536 bind 65536)
> [ 4.660728] TCP reno registered
> [ 4.702266] NET: Registered protocol family 1
> [ 4.759928] Unpacking initramfs...
> [ 5.770094] Freeing initrd memory: 16800kB freed
> [ 5.831593] perfmon: version 2.0 IRQ 238
> [ 5.883213] perfmon: Itanium 2 PMU detected, 16 PMCs, 18 PMDs, 4 counters (47 bits)
> [ 5.984818] perfmon: added sampling format default_format
> [ 6.055925] perfmon_default_smpl: default_format v2.0 registered
> [ 6.135280] audit: initializing netlink socket (disabled)
> [ 6.206435] type=2000 audit(1283613471.206:1): initialized
> [ 6.283506] HugeTLB registered 256 MB page size, pre-allocated 0 pages
> [ 6.372559] VFS: Disk quotas dquot_6.5.2
> [ 6.424341] Dquot-cache hash table entries: 2048 (order 0, 16384 bytes)
> [ 6.511688] msgmni has been set to 4030
> [ 6.562596] alg: No test for stdrng (krng)
> [ 6.616586] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
> [ 6.714104] io scheduler noop registered
> [ 6.765727] io scheduler anticipatory registered
> [ 6.826562] io scheduler deadline registered
> [ 6.882892] io scheduler cfq registered (default)
> [ 6.945119] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
> [ 7.042608] ACPI: Power Button [PWRF]
> [ 7.090892] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
> [ 7.188312] ACPI: Sleep Button [SLPF]
> [ 7.237286] processor LNXCPU:00: registered as cooling_device0
> [ 7.519111] thermal LNXTHERM:01: registered as thermal_zone0
> [ 7.593684] ACPI: Thermal Zone [THM0] (27 C)
> [ 7.652673] Linux agpgart interface v0.103
> [ 7.791154] agpgart: HP ZX1 IOC: IOPDIR shared with sba_iommu
> [ 7.866883] agpgart: No reserved IO PDIR entry found; GART disabled
> [ 8.207105] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> [ 8.290120] 00:05: ttyS0 at MMIO 0xff5e0000 (irq = 49) is a 16550A
> [ 8.371537] console [ttyS0] enabled, bootconsole disabled
> [ 8.371537] console [ttyS0] enabled, bootconsole disabled
> [ 8.507535] 00:06: ttyS1 at MMIO 0xff5e2000 (irq = 50) is a 16550A
> [ 8.581909] mice: PS/2 mouse device common for all mice
> [ 8.644726] rtc-efi rtc-efi: rtc core: registered rtc-efi as rtc0
> [ 8.718714] TCP cubic registered
> [ 8.757413] NET: Registered protocol family 17
> [ 8.810893] registered taskstats version 1
> [ 8.865759] rtc-efi rtc-efi: setting system clock to 2010-09-04 15:17:54 UTC (1283613474)
> [ 8.963915] Freeing unused kernel memory: 736kB freed
> Loading, please wait...
> [ 9.059222] udev: starting version 160
> [ 9.421983] usbcore: registered new interface driver usbfs
> [ 9.488356] usbcore: registered new interface driver hub
> [ 9.552544] usbcore: registered new device driver usb
> [ 9.627691] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 9.742218] SCSI subsystem initialized
> [ 9.788682] Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
> [ 9.866004] Copyright (c) 1999-2006 Intel Corporation.
> [ 9.928600] GSI 40 (level, low) -> CPU 0 (0x0000) vector 51
> [ 9.995449] ehci_hcd 0000:a0:01.2: PCI INT C -> GSI 40 (level, low) -> IRQ 51
> [ 10.138468] ehci_hcd 0000:a0:01.2: EHCI Host Controller
> [ 10.201630] ehci_hcd 0000:a0:01.2: new USB bus registered, assigned bus number 1
> [ 10.311225] ehci_hcd 0000:a0:01.2: irq 51, io mem 0xd0020000
> [ 10.391043] ehci_hcd 0000:a0:01.2: USB 2.0 started, EHCI 0.95
> [ 10.460350] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
> [ 10.541753] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 10.628421] usb usb1: Product: EHCI Host Controller
> [ 10.686929] usb usb1: Manufacturer: Linux 2.6.32-5-mckinley ehci_hcd
> [ 10.763191] usb usb1: SerialNumber: 0000:a0:01.2
> [ 10.819180] usb usb1: configuration #1 chosen from 1 choice
> [ 10.886367] hub 1-0:1.0: USB hub found
> [ 10.931391] hub 1-0:1.0: 5 ports detected
> [ 10.980146] GSI 43 (level, low) -> CPU 0 (0x0000) vector 52
> [ 11.047014] pata_cmd64x 0000:a0:02.0: PCI INT A -> GSI 43 (level, low) -> IRQ 52
> [ 11.142340] scsi0 : pata_cmd64x
> [ 11.180372] scsi1 : pata_cmd64x
> [ 11.218487] ata1: PATA max UDMA/100 cmd 0xa0e8 ctl 0xa0f4 bmdma 0xa0d0 irq 52
> [ 11.304100] ata2: PATA max UDMA/100 cmd 0xa0e0 ctl 0xa0f0 bmdma 0xa0d8 irq 52
> [ 11.393685] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> [ 11.469663] GSI 42 (level, low) -> CPU 0 (0x0000) vector 53
> [ 11.536562] e1000 0000:a0:03.0: PCI INT A -> GSI 42 (level, low) -> IRQ 53
> [ 11.639789] ata1.00: ATA-7: Maxtor 6Y120L0, YAR41BW0, max UDMA/133
> [ 11.713933] ata1.00: 240121728 sectors, multi 0: LBA
> [ 12.005411] e1000: 0000:a0:03.0: e1000_probe: (PCI:33MHz:32-bit) 00:30:6e:38:5a:ec
> [ 12.096680] ata1.01: ATA-7: Maxtor 6Y120L0, YAR41BW0, max UDMA/133
> [ 12.170869] ata1.01: 240121728 sectors, multi 0: LBA
> [ 12.239698] ata1.00: configured for UDMA/100
> [ 12.301375] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
> [ 12.384975] GSI 38 (level, low) -> CPU 0 (0x0000) vector 54
> [ 12.451785] ohci_hcd 0000:a0:01.0: PCI INT A -> GSI 38 (level, low) -> IRQ 54
> [ 12.537440] ata1.01: configured for UDMA/100
> [ 12.589129] scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y120L0 YAR4 PQ: 0 ANSI: 5
> [ 12.687227] scsi 0:0:1:0: Direct-Access ATA Maxtor 6Y120L0 YAR4 PQ: 0 ANSI: 5
> [ 12.784668] ohci_hcd 0000:a0:01.0: OHCI Host Controller
> [ 12.848496] ohci_hcd 0000:a0:01.0: new USB bus registered, assigned bus number 2
> [ 12.937640] ohci_hcd 0000:a0:01.0: irq 54, io mem 0xd0022000
> [ 13.006492] ata2.00: ATAPI: HL-DT-ST GCE-8481B, 1.07, max UDMA/33
> [ 13.591399] ata2.00: configured for UDMA/33
> [ 13.641933] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
> [ 13.723355] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 13.809986] usb usb2: Product: OHCI Host Controller
> [ 13.868520] usb usb2: Manufacturer: Linux 2.6.32-5-mckinley ohci_hcd
> [ 13.944756] usb usb2: SerialNumber: 0000:a0:01.0
> [ 14.001010] scsi 1:0:0:0: CD-ROM HL-DT-ST CD-RW GCE-8481B 1.07 PQ: 0 ANSI: 5
> [ 14.098512] usb usb2: configuration #1 chosen from 1 choice
> [ 14.165832] hub 2-0:1.0: USB hub found
> [ 14.215943] hub 2-0:1.0: 3 ports detected
> [ 14.267422] GSI 39 (level, low) -> CPU 0 (0x0000) vector 55
> [ 14.334343] ohci_hcd 0000:a0:01.1: PCI INT B -> GSI 39 (level, low) -> IRQ 55
> [ 14.439645] sd 0:0:0:0: [sda] 240121728 512-byte logical blocks: (122 GB/114 GiB)
> [ 14.530730] sd 0:0:1:0: [sdb] 240121728 512-byte logical blocks: (122 GB/114 GiB)
> [ 14.620991] sd 0:0:0:0: [sda] Write Protect is off
> [ 14.680374] sd 0:0:1:0: [sdb] Write Protect is off
> [ 14.738187] ohci_hcd 0000:a0:01.1: OHCI Host Controller
> [ 14.801294] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 14.910170] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 15.019101] ohci_hcd 0000:a0:01.1: new USB bus registered, assigned bus number 3
> [ 15.108359] sda:
> [ 15.129598] sdb:
> [ 15.152964] ohci_hcd 0000:a0:01.1: irq 55, io mem 0xd0021000
> [ 15.275543] sda1 sda2 sda3 sda4 sda5 sda6
> [ 15.325918] sdb1 sdb2 sdb3 sdb4 sdb5 sdb6
> [ 15.888365] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 15.947425] sd 0:0:1:0: [sdb] Attached SCSI disk
> [ 16.022530] sr0: scsi3-mmc drive: 4x/40x writer cd/rw xa/form2 cdda tray
> [ 16.102952] Uniform CD-ROM driver Revision: 3.20
> [ 16.177838] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [ 16.243368] sd 0:0:1:0: Attached scsi generic sg1 type 0
> [ 16.310006] sr 1:0:0:0: Attached scsi generic sg2 type 5
> [ 16.375213] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
> [ 16.456863] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 16.543617] usb usb3: Product: OHCI Host Controller
> [ 16.602101] usb usb3: Manufacturer: Linux 2.6.32-5-mckinley ohci_hcd
> [ 16.678361] usb usb3: SerialNumber: 0000:a0:01.1
> [ 16.735919] usb usb3: configuration #1 chosen from 1 choice
> [ 16.804654] hub 3-0:1.0: USB hub found
> [ 16.852911] hub 3-0:1.0: 2 ports detected
> Begin: Loading essential drivers ... done.
> Begi[ 17.338666] md: raid1 personality registered for level 1
> n: Running /scripts/init-premount ... done.
> Begin: Mounting root file system ... Begin: Running /scripts/local-top ... Begin: LoadingSuccess: loaded module raid1.
> done.
> Begin: Assembling all MD arrays ... [ 17.621471] md: md0 stopped.
> [ 17.705085] md: bind<sdb2>
> [ 17.739212] md: bind<sda2>
> [ 17.774144] raid1: raid set md0 active with 2 out of 2 mirrors
> [ 17.844192] md0: detected capacity change from 0 to 999882752
> mdadm: /dev/md0 [ 17.917118] md0:has been started unknown partition table
> with 2 drives.
> [ 18.344573] md: md1 stopped.
> [ 18.512118] md: bind<sdb3>
> [ 18.554580] md: bind<sda3>
> [ 18.590138] raid1: raid set md1 active with 2 out of 2 mirrors
> [ 18.660576] md1: detected capacity change from 0 to 4999872512
> mdadm: /dev/md1 [ 18.736885] md1:has been started with 2 drives.
> unknown partition table
> [ 19.191661] md: md2 stopped.
> [ 19.369259] md: bind<sdb4>
> [ 19.414960] md: bind<sda4>
> [ 19.450641] raid1: raid set md2 active with 2 out of 2 mirrors
> [ 19.521333] md2: detected capacity change from 0 to 9999876096
> unknown partition table96372] md2:has been started with 2 drives.
>
> [ 20.058391] md: md3 stopped.
> [ 20.291868] md: bind<sdb5>
> [ 20.394853] md: bind<sda5>
> [ 20.430250] raid1: raid set md3 active with 2 out of 2 mirrors
> [ 20.500680] md3: detected capacity change from 0 to 9999876096
> unknown partition table75867] md3:has been started with 2 drives.
>
> [ 21.816880] md: md4 stopped.
> [ 22.426985] md: bind<sdb6>
> [ 22.546878] md: bind<sda6>
> [ 22.582429] raid1: raid set md4 active with 2 out of 2 mirrors
> [ 22.652856] md4: detected capacity change from 0 to 96842219520
> mdadm: /dev/md4 [ 22.727569] md4:has been started with 2 drives.
> unknown partition tablerrays.
>
> done.
> done.
>
> udevadm settle - timeout of 10 seconds reached, the event queue contains:
> /sys/devices/virtual/block/md1 (685)
> /sys/devices/virtual/block/md0 (686)
> /sys/devices/virtual/block/md1 (689)
> /sys/devices/virtual/block/md0 (690)
> /sys/devices/virtual/block/md1 (693)
> /sys/devices/virtual/block/md0 (694)
> /sys/devices/virtual/block/md1 (701)
> /sys/devices/virtual/block/md0 (702)
> /sys/devices/virtual/block/md2 (704)
> /sys/devices/virtual/block/md1 (705)
> /sys/devices/virtual/block/md0 (706)
> /sys/devices/virtual/block/md2 (709)
> /sys/devices/virtual/block/md1 (710)
> /sys/devices/virtual/block/md0 (711)
> /sys/devices/virtual/block/md3 (714)
> /sys/devices/virtual/block/md2 (715)
> /sys/devices/virtua[ 33.530028] kjournald starting. Commit interval 5 seconds
> l/block/md1 (716[ 33.607298] EXT3-fs: mounted filesystem with ordered data mode.
> )
> /sys/devices/virtual/block/md3 (718)
> /sys/devices/virtual/block/md2 (719)
> /sys/devices/virtual/block/md1 (720)
> /sys/devices/virtual/block/md0 (721)
> /sys/devices/virtual/block/md0 (722)
> /sys/devices/virtual/block/md3 (724)
> /sys/devices/virtual/block/md2 (725)
> /sys/devices/virtual/block/md1 (726)
> /sys/devices/virtual/block/md0 (727)
> /sys/devices/virtual/block/md3 (729)
> /sys/devices/virtual/block/md2 (730)
> /sys/devices/virtual/block/md1 (731)
> /sys/devices/virtual/block/md0 (732)
> /sys/devices/virtual/block/md3 (734)
> /sys/devices/virtual/block/md2 (735)
> /sys/devices/virtual/block/md1 (736)
> /sys/devices/virtual/block/md0 (737)
> /sys/devices/virtual/block/md3 (739)
> /sys/devices/virtual/block/md2 (740)
> /sys/devices/virtual/block/md1 (741)
> /sys/devices/virtual/block/md0 (742)
> /sys/devices/virtual/block/md3 (744)
> /sys/devices/virtual/block/md2 (745)
> /sys/devices/virtual/block/md1 (746)
> /sys/devices/virtual/block/md0 (747)
> /sys/devices/virtual/block/md4 (748)
> /sys/devices/virtual/block/md3 (749)
> /sys/devices/virtual/block/md2 (750)
> /sys/devices/virtual/block/md1 (751)
> /sys/devices/virtual/block/md0 (752)
> /sys/devices/virtual/block/md4 (753)
> /sys/devices/virtual/block/md3 (754)
> /sys/devices/virtual/block/md2 (755)
> /sys/devices/virtual/block/md1 (756)
> /sys/devices/virtual/block/md0 (757)
> /sys/devices/virtual/block/md4 (758)
> /sys/devices/virtual/block/md3 (759)
> /sys/devices/virtual/block/md2 (760)
> /sys/devices/virtual/block/md1 (761)
> /sys/devices/virtual/block/md0 (762)
> /sys/devices/virtual/block/md4 (763)
> /sys/devices/virtual/block/md3 (764)
> /sys/devices/virtual/block/md2 (765)
> /sys/devices/virtual/block/md1 (766)
> /sys/devices/virtual/block/md0 (767)
> /sys/devices/virtual/block/md4 (768)
> /sys/devices/virtual/block/md3 (769)
> /sys/devices/virtual/block/md2 (770)
> /sys/devices/virtual/block/md1 (771)
> /sys/devices/virtual/block/md0 (772)
> /sys/devices/virtual/block/md4 (773)
> /sys/devices/virtual/block/md3 (774)
> /sys/devices/virtual/block/md2 (775)
> /sys/devices/virtual/block/md1 (776)
> /sys/devices/virtual/block/md0 (777)
> /sys/devices/virtual/block/md4 (778)
> /sys/devices/virtual/block/md3 (779)
> /sys/devices/virtual/block/md2 (780)
> /sys/devices/virtual/block/md1 (781)
> /sys/devices/virtual/block/md0 (782)
> /sys/devices/virtual/block/md4 (783)
> /sys/devices/virtual/block/md3 (784)
> /sys/devices/virtual/block/md2 (785)
> /sys/devices/virtual/block/md1 (786)
> /sys/devices/virtual/block/md0 (787)
> /sys/devices/virtual/block/md4 (788)
> /sys/devices/virtual/block/md3 (789)
> /sys/devices/virtual/block/md2 (790)
> /sys/devices/virtual/block/md1 (791)
> /sys/devices/virtual/block/md0 (792)
> /sys/devices/virtual/block/md4 (793)
> /sys/devices/virtual/block/md3 (794)
> /sys/devices/virtual/block/md2 (795)
> /sys/devices/virtual/block/md1 (796)
> /sys/devices/virtual/block/md0 (797)
> /sys/devices/virtual/block/md4 (798)
> /sys/devices/virtual/block/md3 (799)
> /sys/devices/virtual/block/md2 (800)
> /sys/devices/virtual/block/md1 (801)
> /sys/devices/virtual/block/md0 (802)
> /sys/devices/virtual/block/md4 (803)
> /sys/devices/virtual/block/md3 (804)
> /sys/devices/virtual/block/md2 (805)
> /sys/devices/virtual/block/md1 (806)
> /sys/devices/virtual/block/md0 (807)
> /sys/devices/virtual/block/md4 (808)
> /sys/devices/virtual/block/md3 (809)
> /sys/devices/virtual/block/md2 (810)
> /sys/devices/virtual/block/md1 (811)
> /sys/devices/virtual/block/md0 (812)
> /sys/devices/virtual/block/md4 (813)
> /sys/devices/virtual/block/md3 (814)
> /sys/devices/virtual/block/md2 (815)
> /sys/devices/virtual/block/md1 (816)
> /sys/devices/virtual/block/md0 (817)
> /sys/devices/virtual/block/md4 (818)
> /sys/devices/virtual/block/md3 (819)
> /sys/devices/virtual/block/md2 (820)
> /sys/devices/virtual/block/md1 (821)
> /sys/devices/virtual/block/md0 (822)
> /sys/devices/virtual/block/md4 (823)
> /sys/devices/virtual/block/md3 (824)
> /sys/devices/virtual/block/md2 (825)
> /sys/devices/virtual/block/md1 (826)
> /sys/devices/virtual/block/md0 (827)
> /sys/devices/virtual/block/md4 (828)
> /sys/devices/vevices/virtual/block/md4 (853)
> /sys/devices/virtual/block/md3 (854)
> /sys/devices/virtual/block/md2 (855)
> /sys/devices/virtual/block/md1 (856)
> /sys/devices/virtual/block/md0 (857)
> /sys/devices/virtual/block/md4 (858)
> /sys/devices/virtual/block/md3 (859)
> /sys/devices/virtual/block/md2 (860)
> /sys/devices/virtual/block/md1 (861)
> /sys/devices/virtual/block/md0 (862)
> /sys/devices/virtual/block/md4 (863)
> /sys/devices/virtual/block/md3 (864)
> /sys/devices/virtual/block/md2 (865)
> /sys/devices/virtual/block/md1 (866)
> /sys/devices/virtual/block/md0 (867)
> /sys/devices/virtual/block/md4 (868)
> /sys/devices/virtual/block/md3 (869)
> /sys/devices/virtual/block/md2 (870)
> /sys/devices/virtual/block/md1 (871)
> /sys/devices/virtual/block/md0 (872)
> /sys/devices/virtual/block/md4 (873)
> /sys/devices/virtual/block/md3 (874)
> /sys/devices/virtual/block/md2 (875)
> /sys/devices/virtual/block/md1 (876)
> /sys/devices/virtual/block/md0 (877)
> /sys/devices/virtual/block/md4 (878)
> /sys/devices/virtual/block/md3 (879)
> /sys/devices/virtual/block/md2 (880)
> /sys/devices/virtual/block/md1 (881)
> /sys/devices/virtual/block/md0 (882)
> /sys/devices/virtual/block/md4 (883)
> /sys/devices/virtual/block/md3 (884)
> /sys/devices/virtual/block/md2 (885)
> /sys/devices/virtual/block/md1 (886)
> /sys/devices/virtual/block/md0 (887)
> /sys/devices/virtual/block/md4 (888)
> /sys/devices/virtual/block/md3 (889)
> /sys/devices/virtual/block/md2 (890)
> /sys/devices/virtual/block/md1 (891)
> /sys/devices/virtual/block/md0 (892)
> /sys/devices/virtual/block/md4 (893)
> /sys/devices/virtual/block/md3 (894)
> /sys/devices/virtual/block/md2 (895)
> /sys/devices/virtual/block/md1 (896)
> /sys/devices/virtual/block/md0 (897)
> /sys/devices/virtual/block/md4 (898)
> /sys/devices/virtual/block/md3 (899)
> /sys/devices/virtual/block/md2 (900)
> /sys/devices/virtual/block/md1 (901)
> /sys/devices/virtual/block/md0 (902)
> /sys/devices/virtual/block/md4 (903)
> /sys/devices/virtual/block/md3 (904)
> /sys/devices/virtual/block/md2 (905)
> /sys/devices/virtual/block/md1 (906)
> /sys/devices/virtual/block/md0 (907)
> /sys/devices/virtual/block/md4 (908)
> /sys/devices/virtual/block/md3 (909)
> /sys/devices/virtual/block/md2 (910)
> /sys/devices/virtual/block/md1 (911)
> /sys/devices/virtual/block/md0 (912)
> /sys/devices/virtual/block/md4 (913)
> /sys/devices/virtual/block/md3 (914)
> /sys/devices/virtual/block/md2 (915)
> /sys/devices/virtual/block/md1 (916)
> /sys/devices/virtual/block/md0 (917)
> /sys/devices/virtual/block/md4 (918)
> /sys/devices/virtual/block/md3 (919)
> /sys/devices/virtual/block/md2 (920)
> /sys/devices/virtual/block/md1 (921)
> /sys/devices/virtual/block/md0 (922)
> /sys/devices/virtual/block/md4 (923)
> /sys/devices/virtual/block/md3 (924)
> Begin: Running /scripts/local-premount ... done.
> Begin: Running /scripts/local-bottom ... done.
> done.
> Begin: Running /scripts/init-bottom ... done.
> INIT: version 2.88 booting
> Using makefile-style concurrent boot in runlevel S.
> [ 42.292720] Kernel panic - not syncing: /build/buildd-linux-2.6_2.6.32-20-ia64-gv8uZV/linux-2.6-2.6.32/debian/build/source_ia64_none/arch/ia64/hp/common/sba_iommu.c: I/O MMU @ c0000000fed01000 is out of mapping resources
> [ 42.292729]
>
>
>
>
>
>
--
Thibaut VARENE
http://www.parisc-linux.org/~varenet/
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-mckinley (Debian 2.6.32-21) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-2) ) #1 SMP Wed Aug 25 16:33:21 UTC 2010
[ 0.000000] EFI v1.10 by HP: SALsystab=0x3fb38000 ACPI 2.0=0x3fb2e000 SMBIOS=0x3fb3a000 HCDP=0x3fb2c000
[ 0.000000] booting generic kernel on platform hpzx1
[ 0.000000] PCDP: v0 at 0x3fb2c000
[ 0.000000] Early serial console at MMIO 0xff5e0000 (options '9600n8')
[ 0.000000] bootconsole [uart8250] enabled
[ 0.000000] ACPI: RSDP 000000003fb2e000 00028 (v02 HP)
[ 0.000000] ACPI: XSDT 000000003fb2e02c 0007C (v01 HP zx2000 00000000 HP 00000000)
[ 0.000000] ACPI: FACP 000000003fb373e0 000F4 (v03 HP zx2000 00000000 HP 00000000)
[ 0.000000] ACPI Warning: 32/64X length mismatch in Gpe0Block: 32/16 (20090903/tbfadt-526)
[ 0.000000] ACPI Warning: 32/64X length mismatch in Gpe1Block: 32/16 (20090903/tbfadt-526)
[ 0.000000] ACPI: DSDT 000000003fb2e0e0 05781 (v01 HP zx2000 00000007 INTL 02012044)
[ 0.000000] ACPI: FACS 000000003fb374d8 00040
[ 0.000000] ACPI: SPCR 000000003fb37518 00050 (v01 HP zx2000 00000000 HP 00000000)
[ 0.000000] ACPI: DBGP 000000003fb37568 00034 (v01 HP zx2000 00000000 HP 00000000)
[ 0.000000] ACPI: APIC 000000003fb37628 00084 (v01 HP zx2000 00000000 HP 00000000)
[ 0.000000] ACPI: SPMI 000000003fb375a0 00050 (v04 HP zx2000 00000000 HP 00000000)
[ 0.000000] ACPI: CPEP 000000003fb375f0 00034 (v01 HP zx2000 00000000 HP 00000000)
[ 0.000000] ACPI: SSDT 000000003fb33870 00A14 (v01 HP zx2000 00000006 INTL 02012044)
[ 0.000000] ACPI: SSDT 000000003fb34290 022E2 (v01 HP zx2000 00000006 INTL 02012044)
[ 0.000000] ACPI: SSDT 000000003fb36580 00342 (v01 HP zx2000 00000006 INTL 02012044)
[ 0.000000] ACPI: SSDT 000000003fb368d0 00A16 (v01 HP zx2000 00000006 INTL 02012044)
[ 0.000000] ACPI: SSDT 000000003fb372f0 000EB (v01 HP zx2000 00000006 INTL 02012044)
[ 0.000000] ACPI: Local APIC address c0000000fee00000
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] warning: skipping physical page 0
[ 0.000000] warning: skipping physical page 0
[ 0.000000] warning: skipping physical page 0
[ 0.000000] warning: skipping physical page 0
[ 0.000000] Initial ramdisk at: 0xe00000407df26000 (17224155 bytes)
[ 0.000000] SAL 3.1: HP version 2.31
[ 0.000000] SAL Platform features: None
[ 0.000000] SAL: AP wakeup using external interrupt vector 0xff
[ 0.000000] ACPI: Local APIC address c0000000fee00000
[ 0.000000] GSI 47 (level, low) -> CPU 0 (0x0000) vector 48
[ 0.000000] 1 CPUs available, 1 CPUs total
[ 0.000000] MCA related initialization done
[ 0.000000] warning: skipping physical page 0
[ 0.000000] Virtual mem_map starts at 0xa0007fffc7900000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000001 -> 0x00040000
[ 0.000000] Normal 0x00040000 -> 0x01020000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0x00000001 -> 0x0000fd79
[ 0.000000] 0: 0x0000fec0 -> 0x0000fecb
[ 0.000000] 0: 0x01010000 -> 0x0101ff5a
[ 0.000000] 0: 0x0101ff69 -> 0x0101ff84
[ 0.000000] 0: 0x0101ffa0 -> 0x0101fff2
[ 0.000000] On node 0 totalpages: 130378
[ 0.000000] free_area_init_node: node 0, pgdat e000000000300000, node_mem_map a0007fffc7900000
[ 0.000000] DMA zone: 896 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 64003 pages, LIFO batch:7
[ 0.000000] Normal zone: 56896 pages used for memmap
[ 0.000000] Normal zone: 8583 pages, LIFO batch:1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping off. Total pages: 72586
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=atapi0:/EFI/debian/vmlinuz root=/dev/md1 ro
[ 0.000000] PID hash table entries: 4096 (order: 1, 32768 bytes)
[ 0.000000] Memory: 2046816k/2057056k available (7315k code, 39248k reserved, 3535k data, 736k init)
[ 0.000000] Leaving McKinley Errata 9 workaround enabled
[ 0.000000] SLUB: Genslabs=16, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=256
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1024
[ 0.000000] CPU 0: base freq=200.000MHz, ITC ratio=9/2, ITC freq=900.000MHz+/-450ppm
[ 0.000000] Console: colour dummy device 80x25
[ 0.060000] Calibrating delay loop... 1347.58 BogoMIPS (lpj=2695168)
[ 0.236064] Security Framework initialized
[ 0.288012] SELinux: Disabled at boot.
[ 0.340162] Dentry cache hash table entries: 262144 (order: 7, 2097152 bytes)
[ 0.434369] Inode-cache hash table entries: 131072 (order: 6, 1048576 bytes)
[ 0.529255] Mount-cache hash table entries: 1024
[ 0.592419] Initializing cgroup subsys ns
[ 0.644010] Initializing cgroup subsys cpuacct
[ 0.704008] Initializing cgroup subsys devices
[ 0.760006] Initializing cgroup subsys freezer
[ 0.820005] Initializing cgroup subsys net_cls
[ 0.876046] ACPI: Core revision 20090903
[ 0.932000] Boot processor id 0x0/0x0
[ 0.980127] Brought up 1 CPUs
[ 1.020007] Total of 1 processors activated (1347.58 BogoMIPS).
[ 1.100453] CPU0 attaching NULL sched-domain.
[ 1.100659] devtmpfs: initialized
[ 1.144435] DMI 2.3 present.
[ 1.180403] regulator: core version 0.5
[ 1.232115] NET: Registered protocol family 16
[ 1.292197] ACPI: bus type pci registered
[ 1.344837] bio: create slab <bio-0> at 0
[ 1.396897] ACPI: EC: Look up EC in DSDT
[ 1.412389] ACPI: Interpreter enabled
[ 1.460004] ACPI: (supports S0 S5)
[ 1.504007] ACPI: Using IOSAPIC for interrupt routing
[ 1.896835] ACPI: No dock devices found.
[ 1.968360] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 2.072101] ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.PCI0._PRT]
[ 2.103849] ACPI: PCI Root Bridge [PCI4] (0000:80)
[ 2.208050] ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.PCI4._PRT]
[ 2.280627] ACPI: PCI Root Bridge [PCI5] (0000:a0)
[ 2.395383] pci 0000:a0:01.0: reg 10 32bit mmio: [0xd0022000-0xd0022fff]
[ 2.397257] pci 0000:a0:01.0: supports D1 D2
[ 2.397263] pci 0000:a0:01.0: PME# supported from D0 D1 D2 D3hot
[ 2.476105] pci 0000:a0:01.0: PME# disabled
[ 2.529254] pci 0000:a0:01.1: reg 10 32bit mmio: [0xd0021000-0xd0021fff]
[ 2.531149] pci 0000:a0:01.1: supports D1 D2
[ 2.531154] pci 0000:a0:01.1: PME# supported from D0 D1 D2 D3hot
[ 2.612104] pci 0000:a0:01.1: PME# disabled
[ 2.669252] pci 0000:a0:01.2: reg 10 32bit mmio: [0xd0020000-0xd00200ff]
[ 2.672153] pci 0000:a0:01.2: supports D1 D2
[ 2.672158] pci 0000:a0:01.2: PME# supported from D0 D1 D2 D3hot
[ 2.748104] pci 0000:a0:01.2: PME# disabled
[ 2.805501] pci 0000:a0:02.0: reg 10 io port: [0xa0e8-0xa0ef]
[ 2.805707] pci 0000:a0:02.0: reg 14 io port: [0xa0f4-0xa0f7]
[ 2.805912] pci 0000:a0:02.0: reg 18 io port: [0xa0e0-0xa0e7]
[ 2.806118] pci 0000:a0:02.0: reg 1c io port: [0xa0f0-0xa0f3]
[ 2.806323] pci 0000:a0:02.0: reg 20 io port: [0xa0d0-0xa0df]
[ 2.807471] pci 0000:a0:02.0: supports D1 D2
[ 2.808000] pci 0000:a0:03.0: reg 10 32bit mmio: [0xd0000000-0xd001ffff]
[ 2.812155] pci 0000:a0:03.0: reg 18 io port: [0xa080-0xa0bf]
[ 2.813903] pci 0000:a0:03.0: PME# supported from D0 D3hot D3cold
[ 2.892104] pci 0000:a0:03.0: PME# disabled
[ 2.949451] pci 0000:a0:04.0: reg 10 io port: [0xa000-0xa07f]
[ 2.952651] pci 0000:a0:04.0: supports D2
[ 2.953854] pci 0000:a0:04.1: reg 10 io port: [0xa0c0-0xa0cf]
[ 2.955750] pci 0000:a0:04.1: supports D1
[ 2.955755] pci 0000:a0:04.1: PME# supported from D1 D3hot
[ 3.024105] pci 0000:a0:04.1: PME# disabled
[ 3.081861] ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.PCI5._PRT]
[ 3.139018] ACPI: PCI Root Bridge [PCI6] (0000:c0)
[ 3.243599] ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.PCI6._PRT]
[ 3.256334] vgaarb: loaded
[ 3.349706] IOC: zx1 2.3 HPA 0xfed01000 IOVA space 1024Mb at 0x40000000
[ 3.556894] Switching to clocksource itc
[ 3.608184] pnp: PnP ACPI init
[ 3.652247] ACPI: bus type pnp registered
[ 3.925839] GSI 45 (edge, high) -> CPU 0 (0x0000) vector 49
[ 4.000880] GSI 46 (edge, high) -> CPU 0 (0x0000) vector 50
[ 4.114603] pnp: PnP ACPI: found 8 devices
[ 4.168536] ACPI: ACPI bus type pnp unregistered
[ 4.229769] NET: Registered protocol family 2
[ 4.287254] IP route cache hash table entries: 16384 (order: 3, 131072 bytes)
[ 4.381972] TCP established hash table entries: 65536 (order: 6, 1048576 bytes)
[ 4.479488] TCP bind hash table entries: 65536 (order: 6, 1048576 bytes)
[ 4.569043] TCP: Hash tables configured (established 65536 bind 65536)
[ 4.655069] TCP reno registered
[ 4.696608] NET: Registered protocol family 1
[ 4.754265] Unpacking initramfs...
[ 5.764878] Freeing initrd memory: 16800kB freed
[ 5.826348] perfmon: version 2.0 IRQ 238
[ 5.877967] perfmon: Itanium 2 PMU detected, 16 PMCs, 18 PMDs, 4 counters (47 bits)
[ 5.979578] perfmon: added sampling format default_format
[ 6.050691] perfmon_default_smpl: default_format v2.0 registered
[ 6.130039] audit: initializing netlink socket (disabled)
[ 6.201203] type=2000 audit(1283769951.201:1): initialized
[ 6.277447] HugeTLB registered 256 MB page size, pre-allocated 0 pages
[ 6.367331] VFS: Disk quotas dquot_6.5.2
[ 6.419090] Dquot-cache hash table entries: 2048 (order 0, 16384 bytes)
[ 6.506445] msgmni has been set to 4030
[ 6.557345] alg: No test for stdrng (krng)
[ 6.611345] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 6.708847] io scheduler noop registered
[ 6.760481] io scheduler anticipatory registered
[ 6.821320] io scheduler deadline registered
[ 6.877642] io scheduler cfq registered (default)
[ 6.939876] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 7.037350] ACPI: Power Button [PWRF]
[ 7.085646] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
[ 7.183073] ACPI: Sleep Button [SLPF]
[ 7.232031] processor LNXCPU:00: registered as cooling_device0
[ 7.512297] thermal LNXTHERM:01: registered as thermal_zone0
[ 7.586878] ACPI: Thermal Zone [THM0] (27 C)
[ 7.645841] Linux agpgart interface v0.103
[ 7.783784] agpgart: HP ZX1 IOC: IOPDIR shared with sba_iommu
[ 7.859452] agpgart: No reserved IO PDIR entry found; GART disabled
[ 8.198272] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 8.281340] 00:05: ttyS0 at MMIO 0xff5e0000 (irq = 49) is a 16550A
[ 8.362750] console [ttyS0] enabled, bootconsole disabled
[ 8.498745] 00:06: ttyS1 at MMIO 0xff5e2000 (irq = 50) is a 16550A
[ 8.573125] mice: PS/2 mouse device common for all mice
[ 8.635940] rtc-efi rtc-efi: rtc core: registered rtc-efi as rtc0
[ 8.709927] TCP cubic registered
[ 8.748622] NET: Registered protocol family 17
[ 8.802007] registered taskstats version 1
[ 8.856855] rtc-efi rtc-efi: setting system clock to 2010-09-06 10:45:54 UTC (1283769954)
[ 8.955026] Freeing unused kernel memory: 736kB freed
[ 9.051573] udev: starting version 160
[ 9.425212] usbcore: registered new interface driver usbfs
[ 9.527288] SCSI subsystem initialized
[ 9.574391] Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
[ 9.651714] Copyright (c) 1999-2006 Intel Corporation.
[ 9.713716] usbcore: registered new interface driver hub
[ 9.778074] usbcore: registered new device driver usb
[ 9.864779] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 9.975814] GSI 42 (level, low) -> CPU 0 (0x0000) vector 51
[ 10.042693] e1000 0000:a0:03.0: PCI INT A -> GSI 42 (level, low) -> IRQ 51
[ 10.126184] libata version 3.00 loaded.
[ 10.385899] e1000: 0000:a0:03.0: e1000_probe: (PCI:33MHz:32-bit) 00:30:6e:38:5a:ec
[ 10.513340] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 10.596411] GSI 43 (level, low) -> CPU 0 (0x0000) vector 52
[ 10.663260] pata_cmd64x 0000:a0:02.0: PCI INT A -> GSI 43 (level, low) -> IRQ 52
[ 10.754135] scsi0 : pata_cmd64x
[ 10.792085] scsi1 : pata_cmd64x
[ 10.830264] ata1: PATA max UDMA/100 cmd 0xa0e8 ctl 0xa0f4 bmdma 0xa0d0 irq 52
[ 10.915856] ata2: PATA max UDMA/100 cmd 0xa0e0 ctl 0xa0f0 bmdma 0xa0d8 irq 52
[ 11.001918] pata_cmd64x: active 10 recovery 10 setup 3.
[ 11.002079] pata_cmd64x: active 10 recovery 10 setup 3.
[ 11.002639] GSI 40 (level, low) -> CPU 0 (0x0000) vector 53
[ 11.069474] ehci_hcd 0000:a0:01.2: PCI INT C -> GSI 40 (level, low) -> IRQ 53
[ 11.155793] ehci_hcd 0000:a0:01.2: EHCI Host Controller
[ 11.219074] ehci_hcd 0000:a0:01.2: new USB bus registered, assigned bus number 1
[ 11.316178] ata1.00: ATA-7: Maxtor 6Y120L0, YAR41BW0, max UDMA/133
[ 11.390270] ata1.00: 240121728 sectors, multi 0: LBA
[ 11.451431] ehci_hcd 0000:a0:01.2: irq 53, io mem 0xd0020000
[ 11.519673] ata1.01: ATA-7: Maxtor 6Y120L0, YAR41BW0, max UDMA/133
[ 11.593799] ata1.01: 240121728 sectors, multi 0: LBA
[ 11.654438] pata_cmd64x: active 3 recovery 1 setup 1.
[ 11.654595] pata_cmd64x: active 3 recovery 1 setup 1.
[ 11.660084] ata1.00: configured for UDMA/100
[ 11.711597] ehci_hcd 0000:a0:01.2: USB 2.0 started, EHCI 0.95
[ 11.781107] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 11.862539] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 11.949187] usb usb1: Product: EHCI Host Controller
[ 12.007707] usb usb1: Manufacturer: Linux 2.6.32-5-mckinley ehci_hcd
[ 12.083954] usb usb1: SerialNumber: 0000:a0:01.2
[ 12.140358] ata1.01: configured for UDMA/100
[ 12.192006] scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y120L0 YAR4 PQ: 0 ANSI: 5
[ 12.289579] usb usb1: configuration #1 chosen from 1 choice
[ 12.356832] hub 1-0:1.0: USB hub found
[ 12.402419] scsi 0:0:1:0: Direct-Access ATA Maxtor 6Y120L0 YAR4 PQ: 0 ANSI: 5
[ 12.499747] hub 1-0:1.0: 5 ports detected
[ 12.548758] pata_cmd64x: active 10 recovery 10 setup 3.
[ 12.548921] pata_cmd64x: active 10 recovery 10 setup 3.
[ 12.659839] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 12.735064] ata2.00: ATAPI: HL-DT-ST GCE-8481B, 1.07, max UDMA/33
[ 12.808198] pata_cmd64x: active 3 recovery 1 setup 1.
[ 12.809260] GSI 38 (level, low) -> CPU 0 (0x0000) vector 54
[ 12.876081] ohci_hcd 0000:a0:01.0: PCI INT A -> GSI 38 (level, low) -> IRQ 54
[ 12.962589] ata2.00: configured for UDMA/33
[ 13.013112] ohci_hcd 0000:a0:01.0: OHCI Host Controller
[ 13.076263] ohci_hcd 0000:a0:01.0: new USB bus registered, assigned bus number 2
[ 13.165381] scsi 1:0:0:0: CD-ROM HL-DT-ST CD-RW GCE-8481B 1.07 PQ: 0 ANSI: 5
[ 13.262744] ohci_hcd 0000:a0:01.0: irq 54, io mem 0xd0022000
[ 13.893926] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 13.975351] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 14.062010] usb usb2: Product: OHCI Host Controller
[ 14.120525] usb usb2: Manufacturer: Linux 2.6.32-5-mckinley ohci_hcd
[ 14.196782] usb usb2: SerialNumber: 0000:a0:01.0
[ 14.252764] usb usb2: configuration #1 chosen from 1 choice
[ 14.319996] hub 2-0:1.0: USB hub found
[ 14.365084] hub 2-0:1.0: 3 ports detected
[ 14.416625] GSI 39 (level, low) -> CPU 0 (0x0000) vector 55
[ 14.483552] ohci_hcd 0000:a0:01.1: PCI INT B -> GSI 39 (level, low) -> IRQ 55
[ 14.591160] sd 0:0:0:0: [sda] 240121728 512-byte logical blocks: (122 GB/114 GiB)
[ 14.681397] sd 0:0:1:0: [sdb] 240121728 512-byte logical blocks: (122 GB/114 GiB)
[ 14.771511] sd 0:0:0:0: [sda] Write Protect is off
[ 14.829028] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 14.829620] sd 0:0:1:0: [sdb] Write Protect is off
[ 14.887121] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 14.887479] ohci_hcd 0000:a0:01.1: OHCI Host Controller
[ 14.950560] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 15.059481] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 15.168418] ohci_hcd 0000:a0:01.1: new USB bus registered, assigned bus number 3
[ 15.257665] sda:
[ 15.278915] sdb:
[ 15.302281] ohci_hcd 0000:a0:01.1: irq 55, io mem 0xd0021000
[ 15.938007] sda1 sda2 sda3 sda4 sda5 sda6
[ 15.988472] sdb1 sdb2 sdb3 sdb4 sdb5 sdb6
[ 16.040744] sd 0:0:0:0: [sda] Attached SCSI disk
[ 16.097498] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 16.173309] sr0: scsi3-mmc drive: 4x/40x writer cd/rw xa/form2 cdda tray
[ 16.253718] Uniform CD-ROM driver Revision: 3.20
[ 16.316653] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 16.329638] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 16.395194] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 16.461898] sr 1:0:0:0: Attached scsi generic sg2 type 5
[ 16.527133] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 16.608781] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 16.695535] usb usb3: Product: OHCI Host Controller
[ 16.754026] usb usb3: Manufacturer: Linux 2.6.32-5-mckinley ohci_hcd
[ 16.830288] usb usb3: SerialNumber: 0000:a0:01.1
[ 16.887409] usb usb3: configuration #1 chosen from 1 choice
[ 16.956703] hub 3-0:1.0: USB hub found
[ 17.004945] hub 3-0:1.0: 2 ports detected
[ 17.491159] md: raid1 personality registered for level 1
[ 17.805229] md: md0 stopped.
[ 17.884649] md: bind<sdb2>
[ 17.918980] md: bind<sda2>
[ 17.953849] raid1: raid set md0 active with 2 out of 2 mirrors
[ 18.023931] md0: detected capacity change from 0 to 999882752
[ 18.098505] md0: unknown partition table
[ 18.383113] md: md1 stopped.
[ 18.472953] md: bind<sdb3>
[ 18.506214] md: bind<sda3>
[ 18.541355] raid1: raid set md1 active with 2 out of 2 mirrors
[ 18.611781] md1: detected capacity change from 0 to 4999872512
[ 18.688818] md1: unknown partition table
[ 19.049251] md: md2 stopped.
[ 19.211383] md: bind<sdb4>
[ 19.273633] md: bind<sda4>
[ 19.309019] raid1: raid set md2 active with 2 out of 2 mirrors
[ 19.379451] md2: detected capacity change from 0 to 9999876096
[ 19.452754] md2: unknown partition table
[ 20.100734] md: md3 stopped.
[ 20.461642] md: bind<sdb5>
[ 20.545268] md: bind<sda5>
[ 20.580564] raid1: raid set md3 active with 2 out of 2 mirrors
[ 20.651243] md3: detected capacity change from 0 to 9999876096
[ 20.728118] md3: unknown partition table
[ 21.875718] md: md4 stopped.
[ 22.538503] md: bind<sdb6>
[ 22.713887] md: bind<sda6>
[ 22.749604] raid1: raid set md4 active with 2 out of 2 mirrors
[ 22.820081] md4: detected capacity change from 0 to 96842219520
[ 22.894112] md4: unknown partition table
[ 33.613691] kjournald starting. Commit interval 5 seconds
[ 33.692527] EXT3-fs: mounted filesystem with ordered data mode.
[ 43.321513] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of mapping resources, 8192 5 ffff
[ 43.426056] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 43.503272] ata1.01: failed command: READ DMA
[ 43.555557] ata1.01: cmd c8/00:80:2e:27:6d/00:00:00:00:00/f0 tag 0 dma 65536 in
[ 43.555560] res 50/00:00:08:ad:a3/00:00:00:00:00/e0 Emask 0x40 (internal error)
[ 43.740269] ata1.01: status: { DRDY }
[ 43.792203] pata_cmd64x: active 3 recovery 1 setup 1.
[ 43.792360] pata_cmd64x: active 3 recovery 1 setup 1.
[ 43.808178] ata1.00: configured for UDMA/100
[ 43.872197] ata1.01: configured for UDMA/100
[ 43.923433] ata1: EH complete
[ 43.959847] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of mapping resources, 8192 5 ffff
[ 44.064331] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 44.141552] ata1.01: failed command: READ DMA
[ 44.193826] ata1.01: cmd c8/00:80:2e:27:6d/00:00:00:00:00/f0 tag 0 dma 65536 in
[ 44.193830] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask 0x40 (internal error)
[ 44.378569] ata1.01: status: { DRDY }
[ 44.428193] pata_cmd64x: active 3 recovery 1 setup 1.
[ 44.428351] pata_cmd64x: active 3 recovery 1 setup 1.
[ 44.444181] ata1.00: configured for UDMA/100
[ 44.508180] ata1.01: configured for UDMA/100
[ 44.559413] ata1: EH complete
[ 44.595822] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of mapping resources, 8192 5 ffff
[ 44.700321] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 44.777529] ata1.01: failed command: READ DMA
[ 44.829811] ata1.01: cmd c8/00:80:2e:27:6d/00:00:00:00:00/f0 tag 0 dma 65536 in
[ 44.829814] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask 0x40 (internal error)
[ 45.014539] ata1.01: status: { DRDY }
[ 45.064186] pata_cmd64x: active 3 recovery 1 setup 1.
[ 45.064343] pata_cmd64x: active 3 recovery 1 setup 1.
[ 45.080180] ata1.00: configured for UDMA/100
[ 45.144192] ata1.01: configured for UDMA/100
[ 45.195391] ata1: EH complete
[ 45.231802] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of mapping resources, 8192 5 ffff
[ 45.336282] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 45.413511] ata1.01: failed command: READ DMA
[ 45.465788] ata1.01: cmd c8/00:80:2e:27:6d/00:00:00:00:00/f0 tag 0 dma 65536 in
[ 45.465791] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask 0x40 (internal error)
[ 45.650535] ata1.01: status: { DRDY }
[ 45.700194] pata_cmd64x: active 3 recovery 1 setup 1.
[ 45.700351] pata_cmd64x: active 3 recovery 1 setup 1.
[ 45.716200] ata1.00: configured for UDMA/100
[ 45.780183] ata1.01: configured for UDMA/100
[ 45.831377] ata1: EH complete
[ 45.867786] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of mapping resources, 8192 5 ffff
[ 45.972273] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 46.049489] ata1.01: failed command: READ DMA
[ 46.101770] ata1.01: cmd c8/00:80:2e:27:6d/00:00:00:00:00/f0 tag 0 dma 65536 in
[ 46.101773] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask 0x40 (internal error)
[ 46.286516] ata1.01: status: { DRDY }
[ 46.336206] pata_cmd64x: active 3 recovery 1 setup 1.
[ 46.336363] pata_cmd64x: active 3 recovery 1 setup 1.
[ 46.352192] ata1.00: configured for UDMA/100
[ 46.416188] ata1.01: configured for UDMA/100
[ 46.467359] ata1: EH complete
[ 46.503762] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of mapping resources, 8192 5 ffff
[ 46.608253] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 46.685473] ata1.01: failed command: READ DMA
[ 46.737754] ata1.01: cmd c8/00:80:2e:27:6d/00:00:00:00:00/f0 tag 0 dma 65536 in
[ 46.737757] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask 0x40 (internal error)
[ 46.922483] ata1.01: status: { DRDY }
[ 46.972189] pata_cmd64x: active 3 recovery 1 setup 1.
[ 46.972346] pata_cmd64x: active 3 recovery 1 setup 1.
[ 46.988187] ata1.00: configured for UDMA/100
[ 47.044196] ata1.01: configured for UDMA/100
[ 47.095424] sd 0:0:1:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 47.181137] sd 0:0:1:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
[ 47.270266] Descriptor sense data with sense descriptors (in hex):
[ 47.344524] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 47.422437] 0e 4f f7 7f
[ 47.461607] sd 0:0:1:0: [sdb] Add. Sense: No additional sense information
[ 47.543157] sd 0:0:1:0: [sdb] CDB: Read(10): 28 00 00 6d 27 2e 00 00 80 00
[ 47.626900] end_request: I/O error, dev sdb, sector 7153454
[ 47.693705] raid1: sdb3: rescheduling sector 5005016
[ 47.753278] raid1: sdb3: rescheduling sector 5005024
[ 47.812852] raid1: sdb3: rescheduling sector 5005032
[ 47.872434] raid1: sdb3: rescheduling sector 5005128
[ 47.932008] raid1: sdb3: rescheduling sector 5005136
[ 47.991596] ata1: EH complete
[ 48.027288] raid1: Disk failure on sdb3, disabling device.
[ 48.027291] raid1: Operation continuing on 1 devices.
[ 48.153721] raid1: sda3: redirecting sector 5005016 to another mirror
[ 48.231197] raid1: sda3: redirecting sector 5005024 to another mirror
[ 48.308805] raid1: sda3: redirecting sector 5005032 to another mirror
[ 48.386285] raid1: sda3: redirecting sector 5005128 to another mirror
[ 48.463770] raid1: sda3: redirecting sector 5005136 to another mirror
[ 49.328387] udev: starting version 160
[ 50.029119] gameport: FM801 is pci0000:a0:04.1/gameport0, io 0xa0c0, speed 703kHz
[ 52.311123] Linux video capture interface: v2.00
[ 53.438651] GSI 41 (level, low) -> CPU 0 (0x0000) vector 56
[ 53.508632] FM801 0000:a0:04.0: PCI INT A -> GSI 41 (level, low) -> IRQ 56
[ 57.789765] Adding 976416k swap on /dev/md0. Priority:-1 extents:1 across:976416k
[ 58.328644] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of mapping resources, 8192 5 ffff
[ 58.433184] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 58.510401] ata1.00: failed command: READ DMA
[ 58.562684] ata1.00: cmd c8/00:80:e9:1e:90/00:00:00:00:00/e0 tag 0 dma 65536 in
[ 58.562687] res 50/00:00:e0:1e:90/00:00:00:00:00/e0 Emask 0x40 (internal error)
[ 58.747396] ata1.00: status: { DRDY }
[ 58.796254] pata_cmd64x: active 3 recovery 1 setup 1.
[ 58.796412] pata_cmd64x: active 3 recovery 1 setup 1.
[ 58.812217] ata1.00: configured for UDMA/100
[ 58.876222] ata1.01: configured for UDMA/100
[ 58.927442] ata1: EH complete
[ 58.963826] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of mapping resources, 8192 5 ffff
[ 59.071365] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 59.148702] ata1.00: failed command: READ DMA
[ 59.200954] ata1.00: cmd c8/00:80:e9:1e:90/00:00:00:00:00/e0 tag 0 dma 65536 in
[ 59.200957] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask 0x40 (internal error)
[ 59.385674] ata1.00: status: { DRDY }
[ 59.436285] pata_cmd64x: active 3 recovery 1 setup 1.
[ 59.436443] pata_cmd64x: active 3 recovery 1 setup 1.
[ 59.452217] ata1.00: configured for UDMA/100
[ 59.516221] ata1.01: configured for UDMA/100
[ 59.567490] ata1: EH complete
[ 59.603885] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of mapping resources, 8192 5 ffff
[ 59.708361] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 59.785591] ata1.00: failed command: READ DMA
[ 59.837873] ata1.00: cmd c8/00:80:e9:1e:90/00:00:00:00:00/e0 tag 0 dma 65536 in
[ 59.837876] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask 0x40 (internal error)
[ 60.022616] ata1.00: status: { DRDY }
[ 60.072526] pata_cmd64x: active 3 recovery 1 setup 1.
[ 60.072686] pata_cmd64x: active 3 recovery 1 setup 1.
[ 60.088257] ata1.00: configured for UDMA/100
[ 60.152236] ata1.01: configured for UDMA/100
[ 60.203480] ata1: EH complete
[ 60.239865] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of mapping resources, 8192 5 ffff
[ 60.344417] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 60.421678] ata1.00: failed command: READ DMA
[ 60.473959] ata1.00: cmd c8/00:80:e9:1e:90/00:00:00:00:00/e0 tag 0 dma 65536 in
[ 60.473963] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask 0x40 (internal error)
[ 60.658683] ata1.00: status: { DRDY }
[ 60.708228] pata_cmd64x: active 3 recovery 1 setup 1.
[ 60.708385] pata_cmd64x: active 3 recovery 1 setup 1.
[ 60.724233] ata1.00: configured for UDMA/100
[ 60.812493] ata1.01: configured for UDMA/100
[ 60.863761] ata1: EH complete
[ 60.900127] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of mapping resources, 8192 5 ffff
[ 61.004627] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 61.081953] ata1.00: failed command: READ DMA
[ 61.134209] ata1.00: cmd c8/00:80:e9:1e:90/00:00:00:00:00/e0 tag 0 dma 65536 in
[ 61.134212] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask 0x40 (internal error)
[ 61.318955] ata1.00: status: { DRDY }
[ 61.368330] pata_cmd64x: active 3 recovery 1 setup 1.
[ 61.368501] pata_cmd64x: active 3 recovery 1 setup 1.
[ 61.384241] ata1.00: configured for UDMA/100
[ 61.448237] ata1.01: configured for UDMA/100
[ 61.499506] ata1: EH complete
[ 61.535891] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of mapping resources, 8192 5 ffff
[ 61.640381] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 61.717596] ata1.00: failed command: READ DMA
[ 61.769877] ata1.00: cmd c8/00:80:e9:1e:90/00:00:00:00:00/e0 tag 0 dma 65536 in
[ 61.769881] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask 0x40 (internal error)
[ 61.954601] ata1.00: status: { DRDY }
[ 62.004231] pata_cmd64x: active 3 recovery 1 setup 1.
[ 62.004388] pata_cmd64x: active 3 recovery 1 setup 1.
[ 62.020230] ata1.00: configured for UDMA/100
[ 62.084224] ata1.01: configured for UDMA/100
[ 62.135473] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 62.221176] sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
[ 62.310307] Descriptor sense data with sense descriptors (in hex):
[ 62.384564] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 62.462478] 0e 4f f7 7f
[ 62.501648] sd 0:0:0:0: [sda] Add. Sense: No additional sense information
[ 62.583194] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 90 1e e9 00 00 80 00
[ 62.666941] end_request: I/O error, dev sda, sector 9445097
[ 62.733753] Buffer I/O error on device md1, logical block 912078
[ 62.805839] Buffer I/O error on device md1, logical block 912091
[ 62.877903] Buffer I/O error on device md1, logical block 912092
[ 62.949985] Buffer I/O error on device md1, logical block 912093
[ 63.022068] ata1: EH complete
[ 63.162101] RAID1 conf printout:
[ 63.211314] --- wd:1 rd:2
[ 63.260377] disk 0, wo:0, o:1, dev:sda3
[ 63.324010] disk 1, wo:1, o:0, dev:sdb3
[ 63.374193] RAID1 conf printout:
[ 63.412937] --- wd:1 rd:2
[ 63.445326] disk 0, wo:0, o:1, dev:sda3
[ 63.492658] EXT3 FS on md1, internal journal
[ 63.667235] loop: module loaded
[ 65.022260] kjournald starting. Commit interval 5 seconds
[ 65.106771] EXT3 FS on md3, internal journal
[ 65.159997] EXT3-fs: mounted filesystem with ordered data mode.
[ 65.639214] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 65.756612] SGI XFS Quota Management subsystem
[ 65.907199] XFS mounting filesystem md4
[ 66.067164] Ending clean XFS mount for filesystem: md4
[ 66.289654] REISERFS (device md2): found reiserfs format "3.6" with standard journal
[ 66.382663] REISERFS (device md2): using ordered data mode
[ 66.470360] REISERFS (device md2): journal params: device md2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 66.651940] REISERFS (device md2): checking transaction log (md2)
[ 66.816926] REISERFS (device md2): Using r5 hash to sort names
[ 69.251991] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 71.992276] NET: Registered protocol family 10
[ 72.050889] lo: Disabled Privacy Extensions
[ 76.201895] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of mapping resources, 8192 5 ffff
[ 76.306673] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 76.384039] ata1.01: failed command: WRITE DMA
[ 76.437390] ata1.01: cmd ca/00:80:07:37:b6/00:00:00:00:00/f0 tag 0 dma 65536 out
[ 76.437393] res 50/00:00:b9:cb:d5/00:00:00:00:00/e1 Emask 0x40 (internal error)
[ 76.623182] ata1.01: status: { DRDY }
[ 76.673764] pata_cmd64x: active 3 recovery 1 setup 1.
[ 76.673936] pata_cmd64x: active 3 recovery 1 setup 1.
[ 76.688285] ata1.00: configured for UDMA/100
[ 76.744288] ata1.01: configured for UDMA/100
[ 76.795595] ata1: EH complete
[ 76.832036] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of mapping resources, 8192 5 ffff
[ 76.942964] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 77.020248] ata1.01: failed command: WRITE DMA
[ 77.073539] ata1.01: cmd ca/00:80:07:37:b6/00:00:00:00:00/f0 tag 0 dma 65536 out
[ 77.073542] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask 0x40 (internal error)
[ 77.259317] ata1.01: status: { DRDY }
[ 77.354652] pata_cmd64x: active 3 recovery 1 setup 1.
[ 77.354826] pata_cmd64x: active 3 recovery 1 setup 1.
[ 77.368388] ata1.00: configured for UDMA/100
[ 77.428307] ata1.01: configured for UDMA/100
[ 77.479581] ata1: EH complete
[ 77.516072] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of mapping resources, 8192 5 ffff
[ 77.622342] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 77.699679] ata1.01: failed command: WRITE DMA
[ 77.753020] ata1.01: cmd ca/00:80:07:37:b6/00:00:00:00:00/f0 tag 0 dma 65536 out
[ 77.753024] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask 0x40 (internal error)
[ 77.938921] ata1.01: status: { DRDY }
[ 77.991738] pata_cmd64x: active 3 recovery 1 setup 1.
[ 77.991911] pata_cmd64x: active 3 recovery 1 setup 1.
[ 78.008287] ata1.00: configured for UDMA/100
[ 78.072295] ata1.01: configured for UDMA/100
[ 78.123563] ata1: EH complete
[ 78.160067] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of mapping resources, 8192 5 ffff
[ 78.264864] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 78.342193] ata1.01: failed command: WRITE DMA
[ 78.395497] ata1.01: cmd ca/00:80:07:37:b6/00:00:00:00:00/f0 tag 0 dma 65536 out
[ 78.395500] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask 0x40 (internal error)
[ 78.581269] ata1.01: status: { DRDY }
[ 78.678423] pata_cmd64x: active 3 recovery 1 setup 1.
[ 78.678597] pata_cmd64x: active 3 recovery 1 setup 1.
[ 78.692303] ata1.00: configured for UDMA/100
[ 78.748306] ata1.01: configured for UDMA/100
[ 78.799537] ata1: EH complete
[ 78.836152] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of mapping resources, 8192 5 ffff
[ 78.942542] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 79.019845] ata1.01: failed command: WRITE DMA
[ 79.073138] ata1.01: cmd ca/00:80:07:37:b6/00:00:00:00:00/f0 tag 0 dma 65536 out
[ 79.073141] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask 0x40 (internal error)
[ 79.258940] ata1.01: status: { DRDY }
[ 79.304286] pata_cmd64x: active 3 recovery 1 setup 1.
[ 79.304450] pata_cmd64x: active 3 recovery 1 setup 1.
[ 79.316310] ata1.00: configured for UDMA/100
[ 79.380293] ata1.01: configured for UDMA/100
[ 79.431551] ata1: EH complete
[ 79.468009] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of mapping resources, 8192 5 ffff
[ 79.572895] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 79.650221] ata1.01: failed command: WRITE DMA
[ 79.703502] ata1.01: cmd ca/00:80:07:37:b6/00:00:00:00:00/f0 tag 0 dma 65536 out
[ 79.703505] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask 0x40 (internal error)
[ 79.889458] ata1.01: status: { DRDY }
[ 79.969897] pata_cmd64x: active 3 recovery 1 setup 1.
[ 79.970070] pata_cmd64x: active 3 recovery 1 setup 1.
[ 79.984303] ata1.00: configured for UDMA/100
[ 80.040298] ata1.01: configured for UDMA/100
[ 80.091512] sd 0:0:1:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 80.177189] sd 0:0:1:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
[ 80.266315] Descriptor sense data with sense descriptors (in hex):
[ 80.340571] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 80.418488] 0e 4f f7 7f
[ 80.457657] sd 0:0:1:0: [sdb] Add. Sense: No additional sense information
[ 80.539311] sd 0:0:1:0: [sdb] CDB: Write(10): 2a 00 00 b6 37 07 00 00 80 00
[ 80.624102] end_request: I/O error, dev sdb, sector 11941639
[ 80.691950] raid1: Disk failure on sdb4, disabling device.
[ 80.691952] raid1: Operation continuing on 1 devices.
[ 80.818352] ata1: EH complete
[ 80.856125] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of mapping resources, 8192 5 ffff
[ 80.962117] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 81.039487] ata1.00: failed command: WRITE DMA
[ 81.092755] ata1.00: cmd ca/00:80:2a:37:b6/00:00:00:00:00/e0 tag 0 dma 65536 out
[ 81.092758] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask 0x40 (internal error)
[ 81.278512] ata1.00: status: { DRDY }
[ 81.358397] pata_cmd64x: active 3 recovery 1 setup 1.
[ 81.358569] pata_cmd64x: active 3 recovery 1 setup 1.
[ 81.372307] ata1.00: configured for UDMA/100
[ 81.428280] ata1.01: configured for UDMA/100
[ 81.479497] ata1: EH complete
[ 81.515886] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of mapping resources, 8192 5 ffff
[ 81.620768] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 81.698048] ata1.00: failed command: WRITE DMA
[ 81.751323] ata1.00: cmd ca/00:80:2a:37:b6/00:00:00:00:00/e0 tag 0 dma 65536 out
[ 81.751326] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask 0x40 (internal error)
[ 81.937304] ata1.00: status: { DRDY }
[ 81.983965] pata_cmd64x: active 3 recovery 1 setup 1.
[ 81.984133] pata_cmd64x: active 3 recovery 1 setup 1.
[ 82.000316] ata1.00: configured for UDMA/100
[ 82.064288] ata1.01: configured for UDMA/100
[ 82.115480] ata1: EH complete
[ 82.151860] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of mapping resources, 8192 5 ffff
[ 82.256689] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 82.333988] ata1.00: failed command: WRITE DMA
[ 82.387307] ata1.00: cmd ca/00:80:2a:37:b6/00:00:00:00:00/e0 tag 0 dma 65536 out
[ 82.387311] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask 0x40 (internal error)
[ 82.573091] ata1.00: status: { DRDY }
[ 82.619645] eth0: no IPv6 routers present
[ 82.653479] pata_cmd64x: active 3 recovery 1 setup 1.
[ 82.653652] pata_cmd64x: active 3 recovery 1 setup 1.
[ 82.668302] ata1.00: configured for UDMA/100
[ 82.724316] ata1.01: configured for UDMA/100
[ 82.775555] ata1: EH complete
[ 82.811906] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of mapping resources, 8192 5 ffff
[ 82.916727] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 82.994045] ata1.00: failed command: WRITE DMA
[ 83.047347] ata1.00: cmd ca/00:80:2a:37:b6/00:00:00:00:00/e0 tag 0 dma 65536 out
[ 83.047350] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask 0x40 (internal error)
[ 83.233124] ata1.00: status: { DRDY }
[ 83.279755] pata_cmd64x: active 3 recovery 1 setup 1.
[ 83.279923] pata_cmd64x: active 3 recovery 1 setup 1.
[ 83.296302] ata1.00: configured for UDMA/100
[ 83.360296] ata1.01: configured for UDMA/100
[ 83.411493] ata1: EH complete
[ 83.447880] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of mapping resources, 8192 5 ffff
[ 83.552725] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 83.630031] ata1.00: failed command: WRITE DMA
[ 83.683343] ata1.00: cmd ca/00:80:2a:37:b6/00:00:00:00:00/e0 tag 0 dma 65536 out
[ 83.683346] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask 0x40 (internal error)
[ 83.869326] ata1.00: status: { DRDY }
[ 83.949430] pata_cmd64x: active 3 recovery 1 setup 1.
[ 83.949604] pata_cmd64x: active 3 recovery 1 setup 1.
[ 83.964302] ata1.00: configured for UDMA/100
[ 84.028313] ata1.01: configured for UDMA/100
[ 84.079566] ata1: EH complete
[ 84.115947] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of mapping resources, 8192 5 ffff
[ 84.222110] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 84.299340] ata1.00: failed command: WRITE DMA
[ 84.352646] ata1.00: cmd ca/00:80:2a:37:b6/00:00:00:00:00/e0 tag 0 dma 65536 out
[ 84.352649] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask 0x40 (internal error)
[ 84.538415] ata1.00: status: { DRDY }
[ 84.588336] pata_cmd64x: active 3 recovery 1 setup 1.
[ 84.588498] pata_cmd64x: active 3 recovery 1 setup 1.
[ 84.604298] ata1.00: configured for UDMA/100
[ 84.668300] ata1.01: configured for UDMA/100
[ 84.719498] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 84.805192] sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
[ 84.894422] Descriptor sense data with sense descriptors (in hex):
[ 84.968686] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 85.046592] 0e 4f f7 7f
[ 85.085762] sd 0:0:0:0: [sda] Add. Sense: No additional sense information
[ 85.167417] sd 0:0:0:0: [sda] CDB: Write(10): 2a 00 00 b6 37 2a 00 00 80 00
[ 85.252207] end_request: I/O error, dev sda, sector 11941674
[ 85.320060] Buffer I/O error on device md2, logical block 3447
[ 85.390039] lost page write due to I/O error on md2
[ 85.448585] Buffer I/O error on device md2, logical block 3448
[ 85.518567] lost page write due to I/O error on md2
[ 85.577110] Buffer I/O error on device md2, logical block 3449
[ 85.647119] lost page write due to I/O error on md2
[ 85.705638] Buffer I/O error on device md2, logical block 3450
[ 85.775626] lost page write due to I/O error on md2
[ 85.834355] Buffer I/O error on device md2, logical block 3451
[ 85.904269] lost page write due to I/O error on md2
[ 85.962801] Buffer I/O error on device md2, logical block 3452
[ 86.032794] lost page write due to I/O error on md2
[ 86.091328] Buffer I/O error on device md2, logical block 3453
[ 86.161322] lost page write due to I/O error on md2
[ 86.219860] Buffer I/O error on device md2, logical block 3454
[ 86.289850] lost page write due to I/O error on md2
[ 86.348390] Buffer I/O error on device md2, logical block 3455
[ 86.418378] lost page write due to I/O error on md2
[ 86.476921] Buffer I/O error on device md2, logical block 3456
[ 86.546909] lost page write due to I/O error on md2
[ 86.605493] ata1: EH complete
[ 86.642866] REISERFS abort (device md2): Journal write error in flush_commit_list
[ 86.827570] RAID1 conf printout:
[ 86.866387] --- wd:1 rd:2
[ 86.898842] disk 0, wo:0, o:1, dev:sda4
[ 86.945825] disk 1, wo:1, o:0, dev:sdb4
[ 86.992918] RAID1 conf printout:
[ 87.031639] --- wd:1 rd:2
[ 87.064033] disk 0, wo:0, o:1, dev:sda4
Reply to: