Bug#571741: marked as done (System freezes after pm-hibernate when kms is on)

To: Ben Hutchings <ben@decadent.org.uk>
Subject: Bug#571741: marked as done (System freezes after pm-hibernate when kms is on)
From: owner@bugs.debian.org (Debian Bug Tracking System)
Date: Sat, 24 Jul 2010 01:06:05 +0000
Message-id: <[🔎] handler.571741.D534422.12799334208772.ackdone@bugs.debian.org>
References: <E1OcT9F-00019U-Tv@franck.debian.org> <20100227180219.32754.69420.reportbug@bat.alpha.red>

Your message dated Sat, 24 Jul 2010 01:03:29 +0000
with message-id <E1OcT9F-00019U-Tv@franck.debian.org>
and subject line Bug#534422: fixed in linux-2.6 2.6.32-18
has caused the Debian Bug report #534422,
regarding System freezes after pm-hibernate when kms is on
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
534422: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=534422
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems

--- Begin Message ---

To: Debian Bug Tracking System <submit@bugs.debian.org>
Subject: System freezes after pm-hibernate when kms is on
From: Santiago Garcia Mantinan <manty@debian.org>
Date: Sat, 27 Feb 2010 19:02:19 +0100
Message-id: <20100227180219.32754.69420.reportbug@bat.alpha.red>

Package: xserver-xorg-video-intel
Version: 2:2.9.1-2
Severity: important


Hi!

After going from 2.9.1-1 to 2.9.1-2 I started to experiment computer
freezes or weird things, all of them seemed to tell me that some memory
corruption was going on, can't tell much about it, only that I had to reset
the machine on almost every resume from pm-hibernate.

After reading the changelog I thought that kms was the biggest change going
on, so I commented the kms line at /etc/modprobe.d/i915-kms.conf and
everything seems find now, at least it seems as good as it used to be.

Machine is a Compaq Presario C760EM laptop running linux-image-2.6.32-2-amd64
version 2.6.32-8.  Info about the video hardware should be down here, if you
need any other info just tell me.

-- Package-specific info:
/var/lib/x11/X.roster does not exist.

/var/lib/x11/X.md5sum does not exist.

X server symlink status:
lrwxrwxrwx 1 root root 13 Jul  1  2008 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 1866912 Feb 16 11:25 /usr/bin/Xorg

/var/lib/x11/xorg.conf.roster does not exist.

VGA-compatible devices on PCI bus:
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03)

/var/lib/x11/xorg.conf.md5sum does not exist.

Xorg X server configuration file status:
-rw-r--r-- 1 root root 1619 Jan 30 01:04 /etc/X11/xorg.conf

Contents of /etc/X11/xorg.conf:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"es"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
EndSection

Section "InputDevice"
        Identifier      "Synaptics Touchpad"
        Driver          "synaptics"
        Option          "CorePointer"
	Option		"TapButton1" "1"
	Option		"TapButton2" "2"
	Option		"TapButton3" "3"
EndSection

Section "Device"
	Identifier	"Configured Video Device"
EndSection

Section "Monitor"
	Identifier	"Configured Monitor"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Monitor		"Configured Monitor"
Subsection "Display"
	Depth 24
	Virtual 2560 800
EndSubsection
EndSection

Section "ServerLayout"
        Identifier      "Default Layout"
        Screen          "Default Screen"
        InputDevice     "Generic Keyboard"
        InputDevice     "Configured Mouse"
        InputDevice     "Synaptics Touchpad"
EndSection


Xorg X server log files on system:
-rw-r--r-- 1 root root 30434 Feb 19 22:51 /var/log/Xorg.20.log
-rw-r--r-- 1 root root 92978 Feb 27 18:09 /var/log/Xorg.0.log

Contents of most recent Xorg X server log file
/var/log/Xorg.0.log:

X.Org X Server 1.7.4
Release Date: 2010-01-08
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32.4-dsa-amd64 x86_64 Debian
Current Operating System: Linux bat 2.6.32-2-amd64 #1 SMP Fri Feb 12 00:01:47 UTC 2010 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-2-amd64 root=UUID=046e2800-818f-447c-a9ef-0a5beb51de0c ro ipv6.disable=1 quiet
Build Date: 20 January 2010  11:36:07PM
xorg-server 2:1.7.4-2 (buildd@brahms.debian.org) 
Current version of pixman: 0.16.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Feb 23 19:30:06 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "Configured Monitor"
(==) No device specified for screen "Default Screen".
	Using the first device section listed.
(**) |   |-->Device "Configured Video Device"
(**) |-->Input Device "Generic Keyboard"
(**) |-->Input Device "Configured Mouse"
(**) |-->Input Device "Synaptics Touchpad"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
	Entry deleted from font path.
(==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core keyboard device.
(II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Generic Keyboard
(WW) Disabling Configured Mouse
(II) Loader magic: 0x7c1600
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 6.0
	X.Org XInput driver : 7.0
	X.Org Server Extension : 2.0
(++) using VT number 7

(--) PCI:*(0:0:2:0) 8086:2a02:103c:30d9 Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 3, Mem @ 0x91000000/1048576, 0x80000000/268435456, I/O @ 0x000030d0/8
(--) PCI: (0:0:2:1) 8086:2a03:103c:30d9 Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 3, Mem @ 0x91100000/1048576
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.7.4, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.7.4, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.7.4, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.7.4, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.7.4, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.7.4, module version = 1.1.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(==) Matched intel for the autoconfigured driver
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
	compiled for 1.7.3.902, module version = 2.9.1
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
	compiled for 1.7.3.902, module version = 1.2.1
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 7.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) Primary Device is: PCI 00@00:02:0
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 1.7.4, module version = 0.1.0
	ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
(--) intel(0): Chipset: "965GM"
(--) intel(0): Linear framebuffer at 0x80000000
(--) intel(0): IO registers at addr 0x91000000 size 1048576
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(II) intel(0): No SDVO device is found in VBT
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Configured Monitor
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID for output LVDS
(II) intel(0): Manufacturer: SEC  Model: 4d45  Serial#: 0
(II) intel(0): Year: 2007  Week: 0
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max Image Size [cm]: horiz.: 33  vert.: 21
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified
(II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.580 redY: 0.340   greenX: 0.310 greenY: 0.550
(II) intel(0): blueX: 0.155 blueY: 0.155   whiteX: 0.313 whiteY: 0.329
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 69.3 MHz   Image Size:  331 x 207 mm
(II) intel(0): h_active: 1280  h_sync: 1296  h_sync_end 1344 h_blank_end 1416 h_border: 0
(II) intel(0): v_active: 800  v_sync: 801  v_sync_end 804 v_blanking: 816 v_border: 0
(II) intel(0): Unknown vendor-specific block f
(II) intel(0):  SAMSUNG
(II) intel(0):  LTN154X3-L01
(II) intel(0): EDID (in hex):
(II) intel(0): 	00ffffffffffff004ca3454d00000000
(II) intel(0): 	00110103802115780a87f594574f8c27
(II) intel(0): 	27505400000001010101010101010101
(II) intel(0): 	010101010101121b0088502010301030
(II) intel(0): 	13004bcf100000190000000f00000000
(II) intel(0): 	00000000002387026404000000fe0053
(II) intel(0): 	414d53554e470a2020202020000000fe
(II) intel(0): 	004c544e31353458332d4c30310a001b
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): found backlight control method /sys/class/backlight/acpi_video0
(II) intel(0): Output TV has no monitor section
(II) intel(0): EDID for output VGA
(II) intel(0): EDID for output LVDS
(II) intel(0): Manufacturer: SEC  Model: 4d45  Serial#: 0
(II) intel(0): Year: 2007  Week: 0
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max Image Size [cm]: horiz.: 33  vert.: 21
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified
(II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): GTF timings supported
(II) intel(0): redX: 0.580 redY: 0.340   greenX: 0.310 greenY: 0.550
(II) intel(0): blueX: 0.155 blueY: 0.155   whiteX: 0.313 whiteY: 0.329
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 69.3 MHz   Image Size:  331 x 207 mm
(II) intel(0): h_active: 1280  h_sync: 1296  h_sync_end 1344 h_blank_end 1416 h_border: 0
(II) intel(0): v_active: 800  v_sync: 801  v_sync_end 804 v_blanking: 816 v_border: 0
(II) intel(0): Ranges: V min: 0 V max: 200 Hz, H min: 0 H max: 200 kHz,
(II) intel(0):  SAMSUNG
(II) intel(0):  LTN154X3-L01
(II) intel(0): EDID (in hex):
(II) intel(0): 	00ffffffffffff004ca3454d00000000
(II) intel(0): 	00110103802115780a87f594574f8c27
(II) intel(0): 	27505400000001010101010101010101
(II) intel(0): 	010101010101121b0088502010301030
(II) intel(0): 	13004bcf100000190000000f00000000
(II) intel(0): 	00000000002387026404000000fe0053
(II) intel(0): 	414d53554e470a2020202020000000fe
(II) intel(0): 	004c544e31353458332d4c30310a001b
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Not using default mode "320x175" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x200" (doublescan mode not supported)
(II) intel(0): Not using default mode "360x200" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (interlace mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (height too large for virtual size)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x960" (height too large for virtual size)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x960" (height too large for virtual size)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (height too large for virtual size)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (height too large for virtual size)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (height too large for virtual size)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1792x1344" (height too large for virtual size)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "1792x1344" (height too large for virtual size)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "1856x1392" (height too large for virtual size)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "1856x1392" (height too large for virtual size)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "416x312" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (height too large for virtual size)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (height too large for virtual size)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (height too large for virtual size)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (height too large for virtual size)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (height too large for virtual size)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (height too large for virtual size)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1360x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (height too large for virtual size)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (height too large for virtual size)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (height too large for virtual size)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (height too large for virtual size)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1440x900" (height too large for virtual size)
(II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1024" (height too large for virtual size)
(II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (height too large for virtual size)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (height too large for virtual size)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (height too large for virtual size)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (height too large for virtual size)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (height too large for virtual size)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1080" (height too large for virtual size)
(II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Printing probed modes for output LVDS
(II) intel(0): Modeline "1280x800"x60.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): Modeline "1024x768"x85.0   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync (68.7 kHz)
(II) intel(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x85.1   56.30  800 832 896 1048  600 601 604 631 +hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x85.0   36.00  640 696 752 832  480 481 484 509 -hsync -vsync (43.3 kHz)
(II) intel(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x85.0   35.50  720 756 828 936  400 401 404 446 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x400"x85.1   31.50  640 672 736 832  400 401 404 445 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x350"x85.1   31.50  640 672 736 832  350 382 385 445 +hsync -vsync (37.9 kHz)
(II) intel(0): EDID for output TV
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Output TV disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1280x800
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(II) intel(0): detected 512 kB GTT.
(II) intel(0): detected 7676 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.7.4, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00000203 to 0x00000237
(WW) intel(0): PIPEASTAT before: status: VSYNC_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS
(WW) intel(0): PIPEASTAT after: status: VSYNC_INT_STATUS OFIELD_INT_STATUS EFIELD_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS
(WW) intel(0): Register 0x68000 (TV_CTL) changed from 0x100000c0 to 0x000c00c0
(WW) intel(0): Register 0x68010 (TV_CSC_Y) changed from 0x00000000 to 0x0332012d
(WW) intel(0): Register 0x68014 (TV_CSC_Y2) changed from 0x00000000 to 0x07d30104
(WW) intel(0): Register 0x68018 (TV_CSC_U) changed from 0x00000000 to 0x0733052d
(WW) intel(0): Register 0x6801c (TV_CSC_U2) changed from 0x00000000 to 0x05c70200
(WW) intel(0): Register 0x68020 (TV_CSC_V) changed from 0x00000000 to 0x0340030c
(WW) intel(0): Register 0x68024 (TV_CSC_V2) changed from 0x00000000 to 0x06d00200
(WW) intel(0): Register 0x6802c (TV_CLR_LEVEL) changed from 0x00000000 to 0x010b00e1
(WW) intel(0): Register 0x68030 (TV_H_CTL_1) changed from 0x00000000 to 0x00400359
(WW) intel(0): Register 0x68034 (TV_H_CTL_2) changed from 0x00000000 to 0x80480022
(WW) intel(0): Register 0x68038 (TV_H_CTL_3) changed from 0x00000000 to 0x007c0344
(WW) intel(0): Register 0x6803c (TV_V_CTL_1) changed from 0x00000000 to 0x00f01415
(WW) intel(0): Register 0x68040 (TV_V_CTL_2) changed from 0x00000000 to 0x00060607
(WW) intel(0): Register 0x68044 (TV_V_CTL_3) changed from 0x00000000 to 0x80120001
(WW) intel(0): Register 0x68048 (TV_V_CTL_4) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x6804c (TV_V_CTL_5) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68050 (TV_V_CTL_6) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x68054 (TV_V_CTL_7) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68060 (TV_SC_CTL_1) changed from 0x00000000 to 0xc1710087
(WW) intel(0): Register 0x68064 (TV_SC_CTL_2) changed from 0x00000000 to 0x6b405140
(WW) intel(0): Register 0x68070 (TV_WIN_POS) changed from 0x00000000 to 0x00360024
(WW) intel(0): Register 0x68074 (TV_WIN_SIZE) changed from 0x00000000 to 0x02640198
(WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x00000000 to 0x8000085e
(WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00000000 to 0x00028283
(WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00000000 to 0x00014141
(WW) intel(0): Register 0x68100 (TV_H_LUMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x681ec (TV_H_LUMA_59) changed from 0x00000000 to 0x0000b060
(WW) intel(0): Register 0x68200 (TV_H_CHROMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x682ec (TV_H_CHROMA_59) changed from 0x00000000 to 0x0000b060
(==) Depth 24 pixmap format is 32 bpp
(II) intel(0): Kernel reported 480512 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 1922044 kB available
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) UXA(0): Driver registered support for the following operations:
(II)         solid
(II)         copy
(II)         composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00f6efff: front buffer (8000 kB) X tiled
(II) intel(0): 0x00f9f000-0x00f9ffff: overlay registers (4 kB)
(II) intel(0): 0x00fa0000-0x00fa9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: DRI2 Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
record: RECORD extension enabled at configure time.
record: This extension is known to be broken, disabling extension now..
record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 338 x 211
(II) intel(0): Allocate new frame buffer 1280x800 stride 1280
(II) intel(0): New front buffer at 0xfc6000
(II) Synaptics touchpad driver version 1.2.1
(--) Synaptics Touchpad auto-dev sets device to /dev/input/event9
(**) Option "Device" "/dev/input/event9"
(II) Synaptics Touchpad: x-axis range 0 - 1023
(II) Synaptics Touchpad: y-axis range 0 - 767
(II) Synaptics Touchpad: pressure range 0 - 127
(II) Synaptics Touchpad: finger width range 0 - 0
(II) Synaptics Touchpad: buttons: left right middle
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "2"
(**) Option "TapButton3" "3"
(--) Synaptics Touchpad: touchpad found
(**) Option "CorePointer"
(**) Synaptics Touchpad: always reports core events
(II) XINPUT: Adding extended input device "Synaptics Touchpad" (type: TOUCHPAD)
(**) Synaptics Touchpad: (accel) keeping acceleration scheme 1
(**) Synaptics Touchpad: (accel) acceleration profile 0
(--) Synaptics Touchpad: touchpad found
(II) config/udev: Adding input device "Power Button" (/dev/input/event5)
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.7.3.902, module version = 2.3.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 7.0
(**) "Power Button": always reports core events
(**) "Power Button": Device: "/dev/input/event5"
(II) "Power Button": Found keys
(II) "Power Button": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Power Button"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "es"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "Video Bus" (/dev/input/event6)
(**) "Video Bus": always reports core events
(**) "Video Bus": Device: "/dev/input/event6"
(II) "Video Bus": Found keys
(II) "Video Bus": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Video Bus"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "es"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "Power Button" (/dev/input/event2)
(**) "Power Button": always reports core events
(**) "Power Button": Device: "/dev/input/event2"
(II) "Power Button": Found keys
(II) "Power Button": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Power Button"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "es"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "Sleep Button" (/dev/input/event4)
(**) "Sleep Button": always reports core events
(**) "Sleep Button": Device: "/dev/input/event4"
(II) "Sleep Button": Found keys
(II) "Sleep Button": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Sleep Button"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "es"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "CNF7041" (/dev/input/event10)
(**) "CNF7041": always reports core events
(**) "CNF7041": Device: "/dev/input/event10"
(II) "CNF7041": Found keys
(II) "CNF7041": Configuring as keyboard
(II) XINPUT: Adding extended input device ""CNF7041"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "es"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "AT Translated Set 2 keyboard" (/dev/input/event1)
(**) "AT Translated Set 2 keyboard": always reports core events
(**) "AT Translated Set 2 keyboard": Device: "/dev/input/event1"
(II) "AT Translated Set 2 keyboard": Found keys
(II) "AT Translated Set 2 keyboard": Configuring as keyboard
(II) XINPUT: Adding extended input device ""AT Translated Set 2 keyboard"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "es"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "PS/2 Mouse" (/dev/input/event8)
(**) "PS/2 Mouse": always reports core events
(**) "PS/2 Mouse": Device: "/dev/input/event8"
(II) "PS/2 Mouse": Found 3 mouse buttons
(II) "PS/2 Mouse": Found relative axes
(II) "PS/2 Mouse": Found x and y relative axes
(II) "PS/2 Mouse": Configuring as mouse
(**) "PS/2 Mouse": YAxisMapping: buttons 4 and 5
(**) "PS/2 Mouse": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""PS/2 Mouse"" (type: MOUSE)
(**) "PS/2 Mouse": (accel) keeping acceleration scheme 1
(**) "PS/2 Mouse": (accel) acceleration profile 0
(II) "PS/2 Mouse": initialized for relative axes.
(II) config/udev: Adding input device "PS/2 Mouse" (/dev/input/mouse1)
(**) "PS/2 Mouse": always reports core events
(**) "PS/2 Mouse": Device: "/dev/input/mouse1"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""PS/2 Mouse""
(II) config/udev: Adding input device "AlpsPS/2 ALPS GlidePoint" (/dev/input/event9)
(II) Synaptics touchpad driver version 1.2.1
(**) Option "Device" "/dev/input/event9"
(--) "AlpsPS/2 ALPS GlidePoint": no supported touchpad found
(EE) "AlpsPS/2 ALPS GlidePoint" Unable to query/initialize Synaptics hardware.
(EE) PreInit failed for input device ""AlpsPS/2 ALPS GlidePoint""
(II) UnloadModule: "synaptics"
(II) config/udev: Adding input device "AlpsPS/2 ALPS GlidePoint" (/dev/input/mouse2)
(**) "AlpsPS/2 ALPS GlidePoint": always reports core events
(**) "AlpsPS/2 ALPS GlidePoint": Device: "/dev/input/mouse2"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""AlpsPS/2 ALPS GlidePoint""
(II) config/udev: Adding input device "Macintosh mouse button emulation" (/dev/input/event0)
(**) "Macintosh mouse button emulation": always reports core events
(**) "Macintosh mouse button emulation": Device: "/dev/input/event0"
(II) "Macintosh mouse button emulation": Found 3 mouse buttons
(II) "Macintosh mouse button emulation": Found relative axes
(II) "Macintosh mouse button emulation": Found x and y relative axes
(II) "Macintosh mouse button emulation": Configuring as mouse
(**) "Macintosh mouse button emulation": YAxisMapping: buttons 4 and 5
(**) "Macintosh mouse button emulation": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""Macintosh mouse button emulation"" (type: MOUSE)
(**) "Macintosh mouse button emulation": (accel) keeping acceleration scheme 1
(**) "Macintosh mouse button emulation": (accel) acceleration profile 0
(II) "Macintosh mouse button emulation": initialized for relative axes.
(II) config/udev: Adding input device "Macintosh mouse button emulation" (/dev/input/mouse0)
(**) "Macintosh mouse button emulation": always reports core events
(**) "Macintosh mouse button emulation": Device: "/dev/input/mouse0"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""Macintosh mouse button emulation""
(II) config/udev: Adding input device "ACPI Virtual Keyboard Device" (/dev/input/event14)
(**) "ACPI Virtual Keyboard Device": always reports core events
(**) "ACPI Virtual Keyboard Device": Device: "/dev/input/event14"
(II) "ACPI Virtual Keyboard Device": Found keys
(II) "ACPI Virtual Keyboard Device": Configuring as keyboard
(II) XINPUT: Adding extended input device ""ACPI Virtual Keyboard Device"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "es"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(--) Synaptics Touchpad: touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "CNF7041": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "PS/2 Mouse": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "ACPI Virtual Keyboard Device": Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(--) Synaptics Touchpad: touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "CNF7041": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "PS/2 Mouse": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "ACPI Virtual Keyboard Device": Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(--) Synaptics Touchpad: touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "CNF7041": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "PS/2 Mouse": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "ACPI Virtual Keyboard Device": Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(--) Synaptics Touchpad: touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "CNF7041": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "PS/2 Mouse": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "ACPI Virtual Keyboard Device": Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(--) Synaptics Touchpad: touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "CNF7041": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "PS/2 Mouse": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "ACPI Virtual Keyboard Device": Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(WW) intel(0): ESR is 0x00000001
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(--) Synaptics Touchpad: touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "CNF7041": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "PS/2 Mouse": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "ACPI Virtual Keyboard Device": Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(--) Synaptics Touchpad: touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "CNF7041": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "PS/2 Mouse": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "ACPI Virtual Keyboard Device": Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(--) Synaptics Touchpad: touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "CNF7041": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "PS/2 Mouse": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "ACPI Virtual Keyboard Device": Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(--) Synaptics Touchpad: touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "CNF7041": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "PS/2 Mouse": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "ACPI Virtual Keyboard Device": Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(--) Synaptics Touchpad: touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "CNF7041": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "PS/2 Mouse": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "ACPI Virtual Keyboard Device": Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(--) Synaptics Touchpad: touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "CNF7041": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "PS/2 Mouse": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "ACPI Virtual Keyboard Device": Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(--) Synaptics Touchpad: touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "CNF7041": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "PS/2 Mouse": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "ACPI Virtual Keyboard Device": Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(--) Synaptics Touchpad: touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "CNF7041": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "PS/2 Mouse": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "ACPI Virtual Keyboard Device": Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(--) Synaptics Touchpad: touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "CNF7041": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "PS/2 Mouse": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "ACPI Virtual Keyboard Device": Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(--) Synaptics Touchpad: touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "CNF7041": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "PS/2 Mouse": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "ACPI Virtual Keyboard Device": Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(--) Synaptics Touchpad: touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "CNF7041": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "PS/2 Mouse": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "ACPI Virtual Keyboard Device": Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(--) Synaptics Touchpad: touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "CNF7041": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "PS/2 Mouse": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "ACPI Virtual Keyboard Device": Device reopened after 1 attempts.
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(--) Synaptics Touchpad: touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "CNF7041": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "PS/2 Mouse": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "ACPI Virtual Keyboard Device": Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(--) Synaptics Touchpad: touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "CNF7041": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "PS/2 Mouse": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "ACPI Virtual Keyboard Device": Device reopened after 1 attempts.
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(--) Synaptics Touchpad: touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "CNF7041": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "PS/2 Mouse": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "ACPI Virtual Keyboard Device": Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(--) Synaptics Touchpad: touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "CNF7041": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "PS/2 Mouse": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "ACPI Virtual Keyboard Device": Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(--) Synaptics Touchpad: touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "CNF7041": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "PS/2 Mouse": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "ACPI Virtual Keyboard Device": Device reopened after 1 attempts.
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) config/udev: Adding input device "ACPI Virtual Keyboard Device" (/dev/input/event15)
(**) "ACPI Virtual Keyboard Device": always reports core events
(**) "ACPI Virtual Keyboard Device": Device: "/dev/input/event15"
(II) "ACPI Virtual Keyboard Device": Found keys
(II) "ACPI Virtual Keyboard Device": Configuring as keyboard
(II) XINPUT: Adding extended input device ""ACPI Virtual Keyboard Device"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "es"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) Open ACPI successful (/var/run/acpid.socket)

udev information:
P: /devices/virtual/input/input0/event0
N: input/event0
S: char/13:64
E: UDEV_LOG=3
E: DEVPATH=/devices/virtual/input/input0/event0
E: MAJOR=13
E: MINOR=64
E: DEVNAME=/dev/input/event0
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_SERIAL=noserial
E: x11_driver=evdev
E: DMI_VENDOR=Hewlett-Packard
E: DEVLINKS=/dev/char/13:64

P: /devices/platform/i8042/serio0/input/input1/event1
N: input/event1
S: char/13:65
S: input/by-path/platform-i8042-serio-0-event-kbd
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio0/input/input1/event1
E: MAJOR=13
E: MINOR=65
E: DEVNAME=/dev/input/event1
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-0
E: XKBMODEL=pc105
E: XKBLAYOUT=es
E: DEVLINKS=/dev/char/13:65 /dev/input/by-path/platform-i8042-serio-0-event-kbd
E: XKBOPTIONS=lv3:ralt_switch
E: x11_driver=evdev
E: DMI_VENDOR=Hewlett-Packard

P: /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input10/event10
N: input/event10
S: char/13:74
S: input/by-id/usb-Chicony_Electronics_Co.__Ltd._CNF7041_SN0001-event-if00
S: input/by-path/pci-0000:00:1d.7-usb-0:6:1.0-event
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input10/event10
E: MAJOR=13
E: MINOR=74
E: DEVNAME=/dev/input/event10
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_VENDOR=Chicony_Electronics_Co.__Ltd.
E: ID_VENDOR_ENC=Chicony\x20Electronics\x20Co.\x2c\x20Ltd.
E: ID_VENDOR_ID=04f2
E: ID_MODEL=CNF7041
E: ID_MODEL_ENC=CNF7041
E: ID_MODEL_ID=b057
E: ID_REVISION=0818
E: ID_SERIAL=Chicony_Electronics_Co.__Ltd._CNF7041_SN0001
E: ID_SERIAL_SHORT=SN0001
E: ID_TYPE=video
E: ID_BUS=usb
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=uvcvideo
E: ID_PATH=pci-0000:00:1d.7-usb-0:6:1.0
E: XKBMODEL=pc105
E: XKBLAYOUT=es
E: DEVLINKS=/dev/char/13:74 /dev/input/by-id/usb-Chicony_Electronics_Co.__Ltd._CNF7041_SN0001-event-if00 /dev/input/by-path/pci-0000:00:1d.7-usb-0:6:1.0-event
E: XKBOPTIONS=lv3:ralt_switch
E: x11_driver=evdev

P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input11/event11
N: input/event11
S: char/13:75
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input11/event11
E: MAJOR=13
E: MINOR=75
E: DEVNAME=/dev/input/event11
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ACL_MANAGE=1
E: DMI_VENDOR=Hewlett-Packard
E: DEVLINKS=/dev/char/13:75

P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input12/event12
N: input/event12
S: char/13:76
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input12/event12
E: MAJOR=13
E: MINOR=76
E: DEVNAME=/dev/input/event12
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ACL_MANAGE=1
E: DMI_VENDOR=Hewlett-Packard
E: DEVLINKS=/dev/char/13:76

P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input13/event13
N: input/event13
S: char/13:77
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input13/event13
E: MAJOR=13
E: MINOR=77
E: DEVNAME=/dev/input/event13
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ACL_MANAGE=1
E: DMI_VENDOR=Hewlett-Packard
E: DEVLINKS=/dev/char/13:77

P: /devices/virtual/input/input14/event14
N: input/event14
S: char/13:78
E: UDEV_LOG=3
E: DEVPATH=/devices/virtual/input/input14/event14
E: MAJOR=13
E: MINOR=78
E: DEVNAME=/dev/input/event14
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: XKBMODEL=pc105
E: XKBLAYOUT=es
E: DEVLINKS=/dev/char/13:78
E: XKBOPTIONS=lv3:ralt_switch
E: x11_driver=evdev
E: DMI_VENDOR=Hewlett-Packard

P: /devices/virtual/input/input15/event15
N: input/event15
S: char/13:79
E: UDEV_LOG=3
E: DEVPATH=/devices/virtual/input/input15/event15
E: MAJOR=13
E: MINOR=79
E: DEVNAME=/dev/input/event15
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: XKBMODEL=pc105
E: XKBLAYOUT=es
E: DEVLINKS=/dev/char/13:79
E: XKBOPTIONS=lv3:ralt_switch
E: x11_driver=evdev
E: DMI_VENDOR=Hewlett-Packard

P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2
N: input/event2
S: char/13:66
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2
E: MAJOR=13
E: MINOR=66
E: DEVNAME=/dev/input/event2
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=es
E: DEVLINKS=/dev/char/13:66
E: XKBOPTIONS=lv3:ralt_switch
E: x11_driver=evdev
E: DMI_VENDOR=Hewlett-Packard

P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3/event3
N: input/event3
S: char/13:67
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3/event3
E: MAJOR=13
E: MINOR=67
E: DEVNAME=/dev/input/event3
E: SUBSYSTEM=input
E: ID_INPUT=1
E: DMI_VENDOR=Hewlett-Packard
E: DEVLINKS=/dev/char/13:67

P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4/event4
N: input/event4
S: char/13:68
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4/event4
E: MAJOR=13
E: MINOR=68
E: DEVNAME=/dev/input/event4
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=es
E: DEVLINKS=/dev/char/13:68
E: XKBOPTIONS=lv3:ralt_switch
E: x11_driver=evdev
E: DMI_VENDOR=Hewlett-Packard

P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5
N: input/event5
S: char/13:69
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5
E: MAJOR=13
E: MINOR=69
E: DEVNAME=/dev/input/event5
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=es
E: DEVLINKS=/dev/char/13:69
E: XKBOPTIONS=lv3:ralt_switch
E: x11_driver=evdev
E: DMI_VENDOR=Hewlett-Packard

P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6/event6
N: input/event6
S: char/13:70
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6/event6
E: MAJOR=13
E: MINOR=70
E: DEVNAME=/dev/input/event6
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=es
E: DEVLINKS=/dev/char/13:70
E: XKBOPTIONS=lv3:ralt_switch
E: x11_driver=evdev
E: DMI_VENDOR=Hewlett-Packard

P: /devices/platform/pcspkr/input/input7/event7
N: input/event7
S: char/13:71
S: input/by-path/platform-pcspkr-event-spkr
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/pcspkr/input/input7/event7
E: MAJOR=13
E: MINOR=71
E: DEVNAME=/dev/input/event7
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-pcspkr
E: DMI_VENDOR=Hewlett-Packard
E: DEVLINKS=/dev/char/13:71 /dev/input/by-path/platform-pcspkr-event-spkr

P: /devices/platform/i8042/serio1/input/input8/event8
N: input/event8
S: char/13:72
S: input/by-path/platform-i8042-serio-1-event-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio1/input/input8/event8
E: MAJOR=13
E: MINOR=72
E: DEVNAME=/dev/input/event8
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-1
E: x11_driver=evdev
E: DMI_VENDOR=Hewlett-Packard
E: DEVLINKS=/dev/char/13:72 /dev/input/by-path/platform-i8042-serio-1-event-mouse

P: /devices/platform/i8042/serio1/input/input9/event9
N: input/event9
S: char/13:73
S: input/by-path/platform-i8042-serio-1-event-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio1/input/input9/event9
E: MAJOR=13
E: MINOR=73
E: DEVNAME=/dev/input/event9
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_INPUT_TOUCHPAD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-1
E: x11_driver=synaptics
E: DMI_VENDOR=Hewlett-Packard
E: DEVLINKS=/dev/char/13:73 /dev/input/by-path/platform-i8042-serio-1-event-mouse

DRM Information from dmesg:
[    0.533444] Linux agpgart interface v0.103
[    0.860493] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[    0.860763] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
[    0.872501] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
[    1.013590] [drm] Initialized drm 1.1.0 20060810
[    1.052897] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0


-- System Information:
Debian Release: squeeze/sid
  APT prefers testing
  APT policy: (990, 'testing'), (500, 'unstable'), (500, 'stable'), (1, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-2-amd64 (SMP w/1 CPU core)
Locale: LANG=gl_ES.UTF-8, LC_CTYPE=gl_ES.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages xserver-xorg-video-intel depends on:
ii  libc6                         2.10.2-6   Embedded GNU C Library: Shared lib
ii  libdrm-intel1                 2.4.17-1   Userspace interface to intel-speci
ii  libdrm2                       2.4.17-1   Userspace interface to kernel DRM 
ii  libpciaccess0                 0.11.0-1   Generic PCI access library for X
ii  libxext6                      2:1.1.1-2  X11 miscellaneous extension librar
ii  libxfixes3                    1:4.0.4-1  X11 miscellaneous 'fixes' extensio
ii  libxv1                        2:1.0.5-1  X11 Video extension library
ii  libxvmc1                      2:1.0.5-1  X11 Video extension library
ii  xserver-xorg-core             2:1.7.5-1  Xorg X server - core server

xserver-xorg-video-intel recommends no packages.

xserver-xorg-video-intel suggests no packages.

-- no debconf information

--- End Message ---

--- Begin Message ---

To: 534422-close@bugs.debian.org
Subject: Bug#534422: fixed in linux-2.6 2.6.32-18
From: Ben Hutchings <ben@decadent.org.uk>
Date: Sat, 24 Jul 2010 01:03:29 +0000
Message-id: <E1OcT9F-00019U-Tv@franck.debian.org>

Source: linux-2.6
Source-Version: 2.6.32-18

We believe that the bug you reported is fixed in the latest version of
linux-2.6, which is due to be installed in the Debian FTP archive:

firmware-linux-free_2.6.32-18_all.deb
  to main/l/linux-2.6/firmware-linux-free_2.6.32-18_all.deb
linux-2.6_2.6.32-18.diff.gz
  to main/l/linux-2.6/linux-2.6_2.6.32-18.diff.gz
linux-2.6_2.6.32-18.dsc
  to main/l/linux-2.6/linux-2.6_2.6.32-18.dsc
linux-base_2.6.32-18_all.deb
  to main/l/linux-2.6/linux-base_2.6.32-18_all.deb
linux-doc-2.6.32_2.6.32-18_all.deb
  to main/l/linux-2.6/linux-doc-2.6.32_2.6.32-18_all.deb
linux-manual-2.6.32_2.6.32-18_all.deb
  to main/l/linux-2.6/linux-manual-2.6.32_2.6.32-18_all.deb
linux-patch-debian-2.6.32_2.6.32-18_all.deb
  to main/l/linux-2.6/linux-patch-debian-2.6.32_2.6.32-18_all.deb
linux-source-2.6.32_2.6.32-18_all.deb
  to main/l/linux-2.6/linux-source-2.6.32_2.6.32-18_all.deb
linux-support-2.6.32-5_2.6.32-18_all.deb
  to main/l/linux-2.6/linux-support-2.6.32-5_2.6.32-18_all.deb



A summary of the changes between this version and the previous one is
attached.

Thank you for reporting the bug, which will now be closed.  If you
have further comments please address them to 534422@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.

Debian distribution maintenance software
pp.
Ben Hutchings <ben@decadent.org.uk> (supplier of updated linux-2.6 package)

(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmaster@debian.org)


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512

Format: 1.8
Date: Fri, 23 Jul 2010 03:48:08 +0100
Source: linux-2.6
Binary: linux-tools-2.6.32 linux-source-2.6.32 linux-doc-2.6.32 linux-manual-2.6.32 linux-patch-debian-2.6.32 firmware-linux-free linux-support-2.6.32-5 linux-base linux-libc-dev linux-headers-2.6.32-5-all linux-headers-2.6.32-5-all-alpha linux-headers-2.6.32-5-common linux-image-2.6.32-5-alpha-generic linux-headers-2.6.32-5-alpha-generic linux-image-2.6.32-5-alpha-smp linux-headers-2.6.32-5-alpha-smp linux-image-2.6.32-5-alpha-legacy linux-headers-2.6.32-5-alpha-legacy linux-headers-2.6.32-5-all-amd64 linux-image-2.6.32-5-amd64 linux-headers-2.6.32-5-amd64 linux-image-2.6.32-5-amd64-dbg linux-headers-2.6.32-5-common-openvz linux-image-2.6.32-5-openvz-amd64 linux-headers-2.6.32-5-openvz-amd64 linux-image-2.6.32-5-openvz-amd64-dbg linux-headers-2.6.32-5-common-vserver linux-image-2.6.32-5-vserver-amd64 linux-headers-2.6.32-5-vserver-amd64 linux-image-2.6.32-5-vserver-amd64-dbg linux-headers-2.6.32-5-common-xen linux-image-2.6.32-5-xen-amd64 linux-headers-2.6.32-5-xen-amd64
 linux-image-2.6.32-5-xen-amd64-dbg xen-linux-system-2.6.32-5-xen-amd64 linux-headers-2.6.32-5-all-armel linux-image-2.6.32-5-iop32x linux-headers-2.6.32-5-iop32x linux-image-2.6.32-5-ixp4xx linux-headers-2.6.32-5-ixp4xx linux-image-2.6.32-5-kirkwood linux-headers-2.6.32-5-kirkwood linux-image-2.6.32-5-orion5x linux-headers-2.6.32-5-orion5x linux-image-2.6.32-5-versatile linux-headers-2.6.32-5-versatile linux-headers-2.6.32-5-all-hppa linux-image-2.6.32-5-parisc linux-headers-2.6.32-5-parisc linux-image-2.6.32-5-parisc-smp linux-headers-2.6.32-5-parisc-smp linux-image-2.6.32-5-parisc64 linux-headers-2.6.32-5-parisc64 linux-image-2.6.32-5-parisc64-smp linux-headers-2.6.32-5-parisc64-smp linux-headers-2.6.32-5-all-i386 linux-image-2.6.32-5-486 linux-headers-2.6.32-5-486 linux-image-2.6.32-5-686 linux-headers-2.6.32-5-686 linux-image-2.6.32-5-686-bigmem linux-headers-2.6.32-5-686-bigmem linux-image-2.6.32-5-686-bigmem-dbg linux-image-2.6.32-5-openvz-686
 linux-headers-2.6.32-5-openvz-686 linux-image-2.6.32-5-openvz-686-dbg linux-image-2.6.32-5-vserver-686 linux-headers-2.6.32-5-vserver-686 linux-image-2.6.32-5-vserver-686-bigmem linux-headers-2.6.32-5-vserver-686-bigmem linux-image-2.6.32-5-vserver-686-bigmem-dbg linux-image-2.6.32-5-xen-686 linux-headers-2.6.32-5-xen-686 linux-image-2.6.32-5-xen-686-dbg xen-linux-system-2.6.32-5-xen-686 linux-headers-2.6.32-5-all-ia64 linux-image-2.6.32-5-itanium linux-headers-2.6.32-5-itanium linux-image-2.6.32-5-mckinley linux-headers-2.6.32-5-mckinley linux-image-2.6.32-5-vserver-itanium linux-headers-2.6.32-5-vserver-itanium linux-image-2.6.32-5-vserver-mckinley linux-headers-2.6.32-5-vserver-mckinley linux-headers-2.6.32-5-all-m68k linux-image-2.6.32-5-amiga linux-headers-2.6.32-5-amiga linux-image-2.6.32-5-atari linux-headers-2.6.32-5-atari linux-image-2.6.32-5-bvme6000 linux-headers-2.6.32-5-bvme6000 linux-image-2.6.32-5-mac linux-headers-2.6.32-5-mac
 linux-image-2.6.32-5-mvme147 linux-headers-2.6.32-5-mvme147 linux-image-2.6.32-5-mvme16x linux-headers-2.6.32-5-mvme16x linux-headers-2.6.32-5-all-mips linux-image-2.6.32-5-r4k-ip22 linux-headers-2.6.32-5-r4k-ip22 linux-image-2.6.32-5-r5k-ip32 linux-headers-2.6.32-5-r5k-ip32 linux-image-2.6.32-5-sb1-bcm91250a linux-headers-2.6.32-5-sb1-bcm91250a linux-image-2.6.32-5-sb1a-bcm91480b linux-headers-2.6.32-5-sb1a-bcm91480b linux-image-2.6.32-5-4kc-malta linux-headers-2.6.32-5-4kc-malta linux-image-2.6.32-5-5kc-malta linux-headers-2.6.32-5-5kc-malta linux-headers-2.6.32-5-all-mipsel linux-image-2.6.32-5-r5k-cobalt linux-headers-2.6.32-5-r5k-cobalt linux-headers-2.6.32-5-all-powerpc linux-image-2.6.32-5-powerpc linux-headers-2.6.32-5-powerpc linux-image-2.6.32-5-powerpc-smp linux-headers-2.6.32-5-powerpc-smp linux-image-2.6.32-5-powerpc64 linux-headers-2.6.32-5-powerpc64 linux-image-2.6.32-5-vserver-powerpc linux-headers-2.6.32-5-vserver-powerpc
 linux-image-2.6.32-5-vserver-powerpc64 linux-headers-2.6.32-5-vserver-powerpc64 linux-headers-2.6.32-5-all-s390 linux-image-2.6.32-5-s390x linux-headers-2.6.32-5-s390x linux-image-2.6.32-5-s390x-tape linux-image-2.6.32-5-vserver-s390x linux-headers-2.6.32-5-vserver-s390x linux-headers-2.6.32-5-all-sh4 linux-image-2.6.32-5-sh7751r linux-headers-2.6.32-5-sh7751r linux-image-2.6.32-5-sh7785lcr linux-headers-2.6.32-5-sh7785lcr linux-headers-2.6.32-5-all-sparc linux-image-2.6.32-5-sparc64 linux-headers-2.6.32-5-sparc64 linux-image-2.6.32-5-sparc64-smp linux-headers-2.6.32-5-sparc64-smp linux-image-2.6.32-5-vserver-sparc64 linux-headers-2.6.32-5-vserver-sparc64
 linux-headers-2.6.32-5-all-sparc64
Architecture: all source
Version: 2.6.32-18
Distribution: unstable
Urgency: low
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Changed-By: Ben Hutchings <ben@decadent.org.uk>
Closes: 534422 574766 580124 588426 588863 589989
Description: 
 firmware-linux-free - Binary firmware for various drivers in the Linux kernel
 linux-base - Linux image base package
 linux-doc-2.6.32 - Linux kernel specific documentation for version 2.6.32
 linux-headers-2.6.32-5-486 - Header files for Linux 2.6.32-5-486
 linux-headers-2.6.32-5-4kc-malta - Header files for Linux 2.6.32-5-4kc-malta
 linux-headers-2.6.32-5-5kc-malta - Header files for Linux 2.6.32-5-5kc-malta
 linux-headers-2.6.32-5-686-bigmem - Header files for Linux 2.6.32-5-686-bigmem
 linux-headers-2.6.32-5-686 - Header files for Linux 2.6.32-5-686
 linux-headers-2.6.32-5-all - All header files for Linux 2.6.32
 linux-headers-2.6.32-5-all-alpha - All header files for Linux 2.6.32
 linux-headers-2.6.32-5-all-amd64 - All header files for Linux 2.6.32
 linux-headers-2.6.32-5-all-armel - All header files for Linux 2.6.32
 linux-headers-2.6.32-5-all-hppa - All header files for Linux 2.6.32
 linux-headers-2.6.32-5-all-i386 - All header files for Linux 2.6.32
 linux-headers-2.6.32-5-all-ia64 - All header files for Linux 2.6.32
 linux-headers-2.6.32-5-all-m68k - All header files for Linux 2.6.32
 linux-headers-2.6.32-5-all-mips - All header files for Linux 2.6.32
 linux-headers-2.6.32-5-all-mipsel - All header files for Linux 2.6.32
 linux-headers-2.6.32-5-all-powerpc - All header files for Linux 2.6.32
 linux-headers-2.6.32-5-all-s390 - All header files for Linux 2.6.32
 linux-headers-2.6.32-5-all-sh4 - All header files for Linux 2.6.32
 linux-headers-2.6.32-5-all-sparc64 - All header files for Linux 2.6.32
 linux-headers-2.6.32-5-all-sparc - All header files for Linux 2.6.32
 linux-headers-2.6.32-5-alpha-generic - Header files for Linux 2.6.32-5-alpha-generic
 linux-headers-2.6.32-5-alpha-legacy - Header files for Linux 2.6.32-5-alpha-legacy
 linux-headers-2.6.32-5-alpha-smp - Header files for Linux 2.6.32-5-alpha-smp
 linux-headers-2.6.32-5-amd64 - Header files for Linux 2.6.32-5-amd64
 linux-headers-2.6.32-5-amiga - Header files for Linux 2.6.32-5-amiga
 linux-headers-2.6.32-5-atari - Header files for Linux 2.6.32-5-atari
 linux-headers-2.6.32-5-bvme6000 - Header files for Linux 2.6.32-5-bvme6000
 linux-headers-2.6.32-5-common - Common header files for Linux 2.6.32-5
 linux-headers-2.6.32-5-common-openvz - Common header files for Linux 2.6.32-5-openvz
 linux-headers-2.6.32-5-common-vserver - Common header files for Linux 2.6.32-5-vserver
 linux-headers-2.6.32-5-common-xen - Common header files for Linux 2.6.32-5-xen
 linux-headers-2.6.32-5-iop32x - Header files for Linux 2.6.32-5-iop32x
 linux-headers-2.6.32-5-itanium - Header files for Linux 2.6.32-5-itanium
 linux-headers-2.6.32-5-ixp4xx - Header files for Linux 2.6.32-5-ixp4xx
 linux-headers-2.6.32-5-kirkwood - Header files for Linux 2.6.32-5-kirkwood
 linux-headers-2.6.32-5-mac - Header files for Linux 2.6.32-5-mac
 linux-headers-2.6.32-5-mckinley - Header files for Linux 2.6.32-5-mckinley
 linux-headers-2.6.32-5-mvme147 - Header files for Linux 2.6.32-5-mvme147
 linux-headers-2.6.32-5-mvme16x - Header files for Linux 2.6.32-5-mvme16x
 linux-headers-2.6.32-5-openvz-686 - Header files for Linux 2.6.32-5-openvz-686
 linux-headers-2.6.32-5-openvz-amd64 - Header files for Linux 2.6.32-5-openvz-amd64
 linux-headers-2.6.32-5-orion5x - Header files for Linux 2.6.32-5-orion5x
 linux-headers-2.6.32-5-parisc64 - Header files for Linux 2.6.32-5-parisc64
 linux-headers-2.6.32-5-parisc64-smp - Header files for Linux 2.6.32-5-parisc64-smp
 linux-headers-2.6.32-5-parisc - Header files for Linux 2.6.32-5-parisc
 linux-headers-2.6.32-5-parisc-smp - Header files for Linux 2.6.32-5-parisc-smp
 linux-headers-2.6.32-5-powerpc64 - Header files for Linux 2.6.32-5-powerpc64
 linux-headers-2.6.32-5-powerpc - Header files for Linux 2.6.32-5-powerpc
 linux-headers-2.6.32-5-powerpc-smp - Header files for Linux 2.6.32-5-powerpc-smp
 linux-headers-2.6.32-5-r4k-ip22 - Header files for Linux 2.6.32-5-r4k-ip22
 linux-headers-2.6.32-5-r5k-cobalt - Header files for Linux 2.6.32-5-r5k-cobalt
 linux-headers-2.6.32-5-r5k-ip32 - Header files for Linux 2.6.32-5-r5k-ip32
 linux-headers-2.6.32-5-s390x - Header files for Linux 2.6.32-5-s390x
 linux-headers-2.6.32-5-sb1a-bcm91480b - Header files for Linux 2.6.32-5-sb1a-bcm91480b
 linux-headers-2.6.32-5-sb1-bcm91250a - Header files for Linux 2.6.32-5-sb1-bcm91250a
 linux-headers-2.6.32-5-sh7751r - Header files for Linux 2.6.32-5-sh7751r
 linux-headers-2.6.32-5-sh7785lcr - Header files for Linux 2.6.32-5-sh7785lcr
 linux-headers-2.6.32-5-sparc64 - Header files for Linux 2.6.32-5-sparc64
 linux-headers-2.6.32-5-sparc64-smp - Header files for Linux 2.6.32-5-sparc64-smp
 linux-headers-2.6.32-5-versatile - Header files for Linux 2.6.32-5-versatile
 linux-headers-2.6.32-5-vserver-686-bigmem - Header files for Linux 2.6.32-5-vserver-686-bigmem
 linux-headers-2.6.32-5-vserver-686 - Header files for Linux 2.6.32-5-vserver-686
 linux-headers-2.6.32-5-vserver-amd64 - Header files for Linux 2.6.32-5-vserver-amd64
 linux-headers-2.6.32-5-vserver-itanium - Header files for Linux 2.6.32-5-vserver-itanium
 linux-headers-2.6.32-5-vserver-mckinley - Header files for Linux 2.6.32-5-vserver-mckinley
 linux-headers-2.6.32-5-vserver-powerpc64 - Header files for Linux 2.6.32-5-vserver-powerpc64
 linux-headers-2.6.32-5-vserver-powerpc - Header files for Linux 2.6.32-5-vserver-powerpc
 linux-headers-2.6.32-5-vserver-s390x - Header files for Linux 2.6.32-5-vserver-s390x
 linux-headers-2.6.32-5-vserver-sparc64 - Header files for Linux 2.6.32-5-vserver-sparc64
 linux-headers-2.6.32-5-xen-686 - Header files for Linux 2.6.32-5-xen-686
 linux-headers-2.6.32-5-xen-amd64 - Header files for Linux 2.6.32-5-xen-amd64
 linux-image-2.6.32-5-486 - Linux 2.6.32 for old PCs
 linux-image-2.6.32-5-4kc-malta - Linux 2.6.32 for MIPS Malta
 linux-image-2.6.32-5-5kc-malta - Linux 2.6.32 for MIPS Malta (64-bit)
 linux-image-2.6.32-5-686-bigmem-dbg - Debugging infos for Linux 2.6.32-5-686-bigmem
 linux-image-2.6.32-5-686-bigmem - Linux 2.6.32 for PCs with 4GB+ RAM
 linux-image-2.6.32-5-686 - Linux 2.6.32 for modern PCs
 linux-image-2.6.32-5-alpha-generic - Linux 2.6.32 for Alpha
 linux-image-2.6.32-5-alpha-legacy - Linux 2.6.32 for Alpha Legacy
 linux-image-2.6.32-5-alpha-smp - Linux 2.6.32 for Alpha SMP
 linux-image-2.6.32-5-amd64-dbg - Debugging infos for Linux 2.6.32-5-amd64
 linux-image-2.6.32-5-amd64 - Linux 2.6.32 for 64-bit PCs
 linux-image-2.6.32-5-amiga - Linux 2.6.32 for Amiga
 linux-image-2.6.32-5-atari - Linux 2.6.32 for Atari
 linux-image-2.6.32-5-bvme6000 - Linux 2.6.32 for BVM BVME4000 and BVME6000
 linux-image-2.6.32-5-iop32x - Linux 2.6.32 for IOP32x
 linux-image-2.6.32-5-itanium - Linux 2.6.32 for Itanium
 linux-image-2.6.32-5-ixp4xx - Linux 2.6.32 for IXP4xx
 linux-image-2.6.32-5-kirkwood - Linux 2.6.32 for Marvell Kirkwood
 linux-image-2.6.32-5-mac - Linux 2.6.32 for Macintosh
 linux-image-2.6.32-5-mckinley - Linux 2.6.32 for Itanium II
 linux-image-2.6.32-5-mvme147 - Linux 2.6.32 for Motorola MVME147
 linux-image-2.6.32-5-mvme16x - Linux 2.6.32 for Motorola MVME162/6/7, MVME172/7
 linux-image-2.6.32-5-openvz-686-dbg - Debugging infos for Linux 2.6.32-5-openvz-686
 linux-image-2.6.32-5-openvz-686 - Linux 2.6.32 for modern PCs, OpenVZ support
 linux-image-2.6.32-5-openvz-amd64-dbg - Debugging infos for Linux 2.6.32-5-openvz-amd64
 linux-image-2.6.32-5-openvz-amd64 - Linux 2.6.32 for 64-bit PCs, OpenVZ support
 linux-image-2.6.32-5-orion5x - Linux 2.6.32 for Marvell Orion
 linux-image-2.6.32-5-parisc64 - Linux 2.6.32 for 64-bit PA-RISC
 linux-image-2.6.32-5-parisc64-smp - Linux 2.6.32 for multiprocessor 64-bit PA-RISC
 linux-image-2.6.32-5-parisc - Linux 2.6.32 for 32-bit PA-RISC
 linux-image-2.6.32-5-parisc-smp - Linux 2.6.32 for multiprocessor 32-bit PA-RISC
 linux-image-2.6.32-5-powerpc64 - Linux 2.6.32 for 64-bit PowerPC
 linux-image-2.6.32-5-powerpc - Linux 2.6.32 for uniprocessor 32-bit PowerPC
 linux-image-2.6.32-5-powerpc-smp - Linux 2.6.32 for multiprocessor 32-bit PowerPC
 linux-image-2.6.32-5-r4k-ip22 - Linux 2.6.32 for SGI IP22
 linux-image-2.6.32-5-r5k-cobalt - Linux 2.6.32 for Cobalt
 linux-image-2.6.32-5-r5k-ip32 - Linux 2.6.32 for SGI IP32
 linux-image-2.6.32-5-s390x - Linux 2.6.32 for IBM zSeries
 linux-image-2.6.32-5-s390x-tape - Linux 2.6.32 for IBM zSeries, IPL from tape
 linux-image-2.6.32-5-sb1a-bcm91480b - Linux 2.6.32 for BCM91480B
 linux-image-2.6.32-5-sb1-bcm91250a - Linux 2.6.32 for BCM91250A
 linux-image-2.6.32-5-sh7751r - Linux 2.6.32 for sh7751r
 linux-image-2.6.32-5-sh7785lcr - Linux 2.6.32 for sh7785lcr
 linux-image-2.6.32-5-sparc64 - Linux 2.6.32 for uniprocessor 64-bit UltraSPARC
 linux-image-2.6.32-5-sparc64-smp - Linux 2.6.32 for multiprocessor 64-bit UltraSPARC
 linux-image-2.6.32-5-versatile - Linux 2.6.32 for Versatile
 linux-image-2.6.32-5-vserver-686-bigmem-dbg - Debugging infos for Linux 2.6.32-5-vserver-686-bigmem
 linux-image-2.6.32-5-vserver-686-bigmem - Linux 2.6.32 for PCs with 4GB+ RAM, Linux-VServer support
 linux-image-2.6.32-5-vserver-686 - Linux 2.6.32 for modern PCs, Linux-VServer support
 linux-image-2.6.32-5-vserver-amd64-dbg - Debugging infos for Linux 2.6.32-5-vserver-amd64
 linux-image-2.6.32-5-vserver-amd64 - Linux 2.6.32 for 64-bit PCs, Linux-VServer support
 linux-image-2.6.32-5-vserver-itanium - Linux 2.6.32 for Itanium, Linux-VServer support
 linux-image-2.6.32-5-vserver-mckinley - Linux 2.6.32 for Itanium II, Linux-VServer support
 linux-image-2.6.32-5-vserver-powerpc64 - Linux 2.6.32 for 64-bit PowerPC, Linux-VServer support
 linux-image-2.6.32-5-vserver-powerpc - Linux 2.6.32 for uniprocessor 32-bit PowerPC, Linux-VServer suppo
 linux-image-2.6.32-5-vserver-s390x - Linux 2.6.32 for IBM zSeries, Linux-VServer support
 linux-image-2.6.32-5-vserver-sparc64 - Linux 2.6.32 for uniprocessor 64-bit UltraSPARC, Linux-VServer su
 linux-image-2.6.32-5-xen-686-dbg - Debugging infos for Linux 2.6.32-5-xen-686
 linux-image-2.6.32-5-xen-686 - Linux 2.6.32 for modern PCs, Xen dom0 support
 linux-image-2.6.32-5-xen-amd64-dbg - Debugging infos for Linux 2.6.32-5-xen-amd64
 linux-image-2.6.32-5-xen-amd64 - Linux 2.6.32 for 64-bit PCs, Xen dom0 support
 linux-libc-dev - Linux support headers for userspace development
 linux-manual-2.6.32 - Linux kernel API manual pages for version 2.6.32
 linux-patch-debian-2.6.32 - Debian patches to version 2.6.32 of the Linux kernel
 linux-source-2.6.32 - Linux kernel source for version 2.6.32 with Debian patches
 linux-support-2.6.32-5 - Support files for Linux 2.6.32
 linux-tools-2.6.32 - Performance analysis tools for Linux 2.6.32
 xen-linux-system-2.6.32-5-xen-686 - Xen system with Linux 2.6.32 on modern PCs
 xen-linux-system-2.6.32-5-xen-amd64 - Xen system with Linux 2.6.32 on 64-bit PCs
Changes: 
 linux-2.6 (2.6.32-18) unstable; urgency=low
 .
   [ Ben Hutchings ]
   * iwlwifi: Allocate pages for RX buffers, reducing the probability of
     allocation failure (Closes: #580124)
   * postinst: Remove support for 'default' boot loaders. Warn users on
     upgrade if the current configuration may rely on this.
   * rt2860sta, rt2870sta: Apply changes from Linux 2.6.33 and 2.6.34
     - rt2860sta: Fix WPA(2)PSK issue when group cipher of AP is WEP40
       or WEP104 (Closes: #574766)
   * rt3090sta: Replace with rt2860sta (Closes: #588863)
   * [i386/686] Remove AMD K6 from the list of supported processors; it
     does not implement the CMOV instruction
   * drm/i915: Add 'reclaimable' to i915 self-reclaimable page allocations
     (really closes: #534422, we hope)
   * Revert "x86, paravirt: Add a global synchronization point for pvclock",
     included in stable 2.6.32.16 (Closes: #588426)
   * 3c59x: Fix call to mdio_sync() with the wrong argument (Closes: #589989)
 .
   [ Martin Michlmayr ]
   * Add some patches from the Orion tree, including support for Marvell's
     Armada 300 (88F6282):
     - Kirkwood: update MPP definition.
     - Kirkwood: fix HP t5325 after updating MPP definitions
     - leds: leds-gpio: Change blink_set callback to be able to turn off
       blinking
     - net/phy/marvell: Expose IDs and flags in a .h and add dns323 LEDs
       setup flag
     - orion5x: Base support for DNS-323 rev C1
     - orion5x: Fix soft-reset for some platforms
     - mtd: orion/kirkwood: add RnB line support to orion mtd driver
     - mtd: kirkwood: allow machines to register RnB callback
     - Kirkwood: add support for rev A1 of the 88f6192 and 88f6180 chips
     - Kirkwood: Add support for 88f6282
     - PCI: add platform private data to pci_sys_data
     - Kirkwood: add support for PCIe1
     - Kirkwood: more factorization of the PCIe init code
 .
   [ maximilian attems ]
   * sched: Fix over-scheduling bug.
Checksums-Sha1: 
 8b45404150ed3c2e1c78c426b6d91fa0c7a08e09 6969 linux-2.6_2.6.32-18.dsc
 16a28919067882cd7e55b246a867bc1fc9d95b90 12828672 linux-2.6_2.6.32-18.diff.gz
 5154817da8983e8fa5ad51c709f2ea346dea713c 6045930 linux-doc-2.6.32_2.6.32-18_all.deb
 ed00c540e81d630535de4f986d844e9a03d8fe33 2714832 linux-manual-2.6.32_2.6.32-18_all.deb
 a33cc636c8d6a1228667f97b2985592ff2a248c3 6015344 linux-patch-debian-2.6.32_2.6.32-18_all.deb
 a10984f4de0d912dd716deacf32aabe03ea8dbbd 64144820 linux-source-2.6.32_2.6.32-18_all.deb
 b71e8139add682012baa388832d930155b64c1fe 146504 linux-support-2.6.32-5_2.6.32-18_all.deb
 84725368149a0c72d7b5dd1bb5c6d8bdd9a8d051 135158 firmware-linux-free_2.6.32-18_all.deb
 23e7ccb1b283f10679ca69fc9400fe4d82432598 152990 linux-base_2.6.32-18_all.deb
Checksums-Sha256: 
 176fcc582550849cb2e6e63cafb766b53ddbb89fd3ba24285e9115bf7c0b4f25 6969 linux-2.6_2.6.32-18.dsc
 cb9b6d42d4816991164eea3302fa3fd2549fad39065521eee198f1aa6fe113f1 12828672 linux-2.6_2.6.32-18.diff.gz
 2b9fe8cc42611883b09b034b160463221a06291ece02ec9b853c451353b866e3 6045930 linux-doc-2.6.32_2.6.32-18_all.deb
 86d4f337b3a352f410ba810029b31781f0938d8cabc383873c40d26c6890d273 2714832 linux-manual-2.6.32_2.6.32-18_all.deb
 f4f27ad4b085189c3ee51381830b3ee9ef0debce2016fd41809d7e01d3df171e 6015344 linux-patch-debian-2.6.32_2.6.32-18_all.deb
 7a347935e0423bf0bd963bcb9b222b20b21bd63ec88e398093c412803ffe198d 64144820 linux-source-2.6.32_2.6.32-18_all.deb
 bf344a8fac881556fa035d471c3cbe1edb99a25580350ca1c9b677f9d292dd01 146504 linux-support-2.6.32-5_2.6.32-18_all.deb
 e14158fab54f3755c7600d8d84ce8a33c903e94d912fb3d6b20992af3a964d69 135158 firmware-linux-free_2.6.32-18_all.deb
 5797d53bce2b64f30cff738b0eb8f8c1beb2c43485b00e4fdfd3b3b3ef241a8c 152990 linux-base_2.6.32-18_all.deb
Files: 
 cb2dd03893528478fb68ff4385a4f59a 6969 kernel optional linux-2.6_2.6.32-18.dsc
 a1de5b6061af5abcf89e739c46331ad4 12828672 kernel optional linux-2.6_2.6.32-18.diff.gz
 4afe465cd86b2d8b6206524075ec9f3d 6045930 doc optional linux-doc-2.6.32_2.6.32-18_all.deb
 5614429de003eac59c865bb6a0539f6b 2714832 doc optional linux-manual-2.6.32_2.6.32-18_all.deb
 d5f1e68b015dc8ca797968eeb3a1858b 6015344 kernel optional linux-patch-debian-2.6.32_2.6.32-18_all.deb
 2143f99c3dbe50fe75ee8e2c572196ad 64144820 kernel optional linux-source-2.6.32_2.6.32-18_all.deb
 870836cbacd1dd7843a2d5e075f9bc91 146504 devel optional linux-support-2.6.32-5_2.6.32-18_all.deb
 92f8793d5d39dcc10b96928433818b3a 135158 kernel optional firmware-linux-free_2.6.32-18_all.deb
 be3e0cf4b12d505122ab2ea8bf4a3d5c 152990 kernel optional linux-base_2.6.32-18_all.deb

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
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=wtk4
-----END PGP SIGNATURE-----

--- End Message ---

Reply to:

Prev by Date: Bug#545517: marked as done (linux-image-2.6.31-rc6-amd64: freeze and on-disk corruption with KMS and suspend-to-disk)
Next by Date: Bug#545125: marked as done (linux-image-2.6.31-rc6-amd64: freeze and on-disk corruption with KMS and suspend-to-disk)
Previous by thread: Bug#571741: marked as done (System freezes after pm-hibernate when kms is on)
Next by thread: Bug#571741: marked as done (System freezes after pm-hibernate when kms is on)
Index(es):
- Date
- Thread