Bug#530557: linux-image-2.6.26-2-686: segfault when cat or view files under /proc/megaraid/hba0 to check status
It seems to work OK.
I got the linux-image .deb and dpkg -i'd it but it also needed
linux-base, so I got that too. dpkg -i'd it, but it needed
libuuid-perl. That exists in Etch so aptitude was able to fix things by
installing that from etch.
I then rebooted and tested catting the files under /proc/megaraid.
I'll attach the dmesg and the contents of those files. Note that the
driver still can't get the cache data and assumnes write-through. This
is a good assumption (since I have that set on the raid card), but it is
only an assumption. If the card had a battery-backup, I may have the
cache set differently.
Thanks for your help.
Doug.
On Sat, Jul 10, 2010 at 09:37:31PM +0200, Moritz Muehlenhoff wrote:
> tags 530557 moreinfo
> thanks
>
> On Mon, May 25, 2009 at 02:12:37PM -0400, Douglas A. Tutty wrote:
> > Package: linux-image-2.6.26-2-686
> > Version: 2.6.26-15lenny2
> > Severity: normal
> >
> > On up-to-date Etch, I could check the status of my raid array by viewing
> > or catting files under /proc/megaraid. On Lenny (with the 1.6.26
> > kernel), I get a segfault the first time (per boot) but subsequent tries
> > result in a hung process. The process is immortal, it cannot be killed,
> > not even by init on shutdown.
> >
> > The raid card is a HP NetRaid 1Si.
>
> Hi,
> The next release of Debian (6.0, code name Squeeze) will be based
> on 2.6.32. Please test the current 2.6.32 from unstable/testing and tell
> us whether the problem persists. If so, we should report it upstream
> to the kernel.org developers.
>
> The 2.6.32 kernel is available from packages.debian.org and can
> be installed in both Debian stable, testing and unstable
> installations.
>
> Thanks,
> Moritz
>
Battery Status:[9] Module Missing Pack Missing
v2.00.4 (Release Date: Thu Feb 9 08:51:30 EST 2006)
Controller Type: 438/466/467/471/493/518/520/531/532
Controller is not using 64-bit memory addressing
Base = f7c88000, Irq = 17, Logical Drives = 2, Channels = 1
Version =F :B , DRAM = 16Mb
Controller Queue Depth = 254, Driver Queue Depth = 126
support_ext_cdb = 0
support_random_del = 0
boot_ldrv_enabled = 1
boot_ldrv = 0
boot_pdrv_enabled = 0
boot_pdrv_ch = 0
boot_pdrv_tgt = 0
quiescent = 0
has_cluster = 0
Module Parameters:
max_cmd_per_lun = 63
max_sectors_per_io = 128
Channel: 0 Id: 0 State: Online.
Vendor: HP Model: 36.4GB C 80-D94N Rev: D94N
Type: Direct-Access ANSI SCSI revision: 02
Channel: 0 Id: 1 State: Online.
Vendor: HP Model: 36.4GB C 80-D94N Rev: D94N
Type: Direct-Access ANSI SCSI revision: 02
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-15) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-1) ) #1 SMP Tue Jun 1 04:59:47 UTC 2010
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e9400 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[ 0.000000] BIOS-e820: 000000003fff0000 - 000000003ffffc00 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ffffc00 - 0000000040000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fffe9400 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.1 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037000000 page 2M
[ 0.000000] 0037000000 - 00373fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[ 0.000000] RAMDISK: 37dcb000 - 37fefac5
[ 0.000000] Allocated new RAMDISK: 00100000 - 00324ac5
[ 0.000000] Move RAMDISK from 0000000037dcb000 - 0000000037fefac4 to 00100000 - 00324ac4
[ 0.000000] ACPI: RSDP 000f72c0 00014 (v00 PTLTD )
[ 0.000000] ACPI: RSDT 3fffde8f 00030 (v01 HP HWPC203 00000001 LTP 00000000)
[ 0.000000] ACPI: FACP 3ffffb13 00074 (v01 HP HWPC203 00000002 PTL 001E8480)
[ 0.000000] ACPI: DSDT 3fffdebf 01C54 (v01 HP HWPC203 00000001 MSFT 0100000A)
[ 0.000000] ACPI: FACS 3fffffc0 00040
[ 0.000000] ACPI: APIC 3ffffb87 00052 (v01 PTLTD APIC 00000001 LTP 00000001)
[ 0.000000] ACPI: BOOT 3ffffbd9 00027 (v01 PTLTD $SBFTBL$ 00000001 LTP 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 139MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 0 - 373fe000
[ 0.000000] node 0 low ram: 00000000 - 373fe000
[ 0.000000] node 0 bootmap 00012000 - 00018e80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014c3154] TEXT DATA BSS ==> [0001000000 - 00014c3154]
[ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #5 [00014c4000 - 00014ca170] BRK ==> [00014c4000 - 00014ca170]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #7 [0000100000 - 0000324ac5] NEW RAMDISK ==> [0000100000 - 0000324ac5]
[ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
[ 0.000000] found SMP MP-table at [c00f7330] f7330
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0003fff0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003fff0
[ 0.000000] On node 0 totalpages: 262015
[ 0.000000] free_area_init_node: node 0, pgdat c13ae680, node_mem_map c14cc200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 280 pages used for memmap
[ 0.000000] HighMem zone: 35546 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ea000
[ 0.000000] PM: Registered nosave memory: 00000000000ea000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2000000 s34136 r0 d23208 u2097152
[ 0.000000] pcpu-alloc: s34136 r0 d23208 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259967
[ 0.000000] Kernel command line: root=LABEL=root ro apm=power-off
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000373fe:0003fff0)
[ 0.000000] Memory: 1031372k/1048512k available (2490k kernel code, 16252k reserved, 1318k data, 372k init, 143304k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.000000] .init : 0xc13b9000 - 0xc1416000 ( 372 kB)
[ 0.000000] .data : 0xc126e965 - 0xc13b81e0 (1318 kB)
[ 0.000000] .text : 0xc1000000 - 0xc126e965 (2490 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 449.246 MHz processor.
[ 0.004022] Calibrating delay loop (skipped), value calculated using timer frequency.. 898.49 BogoMIPS (lpj=1796984)
[ 0.004230] Security Framework initialized
[ 0.004325] SELinux: Disabled at boot.
[ 0.004422] Mount-cache hash table entries: 512
[ 0.005259] Initializing cgroup subsys ns
[ 0.005335] Initializing cgroup subsys cpuacct
[ 0.005412] Initializing cgroup subsys devices
[ 0.005480] Initializing cgroup subsys freezer
[ 0.005546] Initializing cgroup subsys net_cls
[ 0.005714] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 0.005819] CPU: L2 cache: 512K
[ 0.005890] mce: CPU supports 5 MCE banks
[ 0.006026] Performance Events: p6 PMU driver.
[ 0.006146] ... version: 0
[ 0.006207] ... bit width: 32
[ 0.006269] ... generic registers: 2
[ 0.006331] ... value mask: 00000000ffffffff
[ 0.006396] ... max period: 000000007fffffff
[ 0.006461] ... fixed-purpose events: 0
[ 0.006522] ... event mask: 0000000000000003
[ 0.008034] Checking 'hlt' instruction... OK.
[ 0.027771] ACPI: Core revision 20090903
[ 0.035941] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.037657] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.040001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.040001] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.040001] ..... (found apic 0 pin 2) ...
[ 0.040001] ....... failed.
[ 0.040001] ...trying to set up timer as Virtual Wire IRQ...
[ 0.081223] ..... works.
[ 0.081285] CPU0: Intel Pentium II (Deschutes) stepping 02
[ 0.084001] Booting processor 1 APIC 0x0 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 0.008000] CPU: L2 cache: 512K
[ 0.172151] CPU1: Intel Pentium II (Deschutes) stepping 02
[ 0.172514] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.176348] Brought up 2 CPUs
[ 0.176432] Total of 2 processors activated (1797.04 BogoMIPS).
[ 0.177936] CPU0 attaching sched-domain:
[ 0.177954] domain 0: span 0-1 level CPU
[ 0.177968] groups: 0 1
[ 0.177994] CPU1 attaching sched-domain:
[ 0.178007] domain 0: span 0-1 level CPU
[ 0.178020] groups: 1 0
[ 0.178445] devtmpfs: initialized
[ 0.181367] regulator: core version 0.5
[ 0.181367] NET: Registered protocol family 16
[ 0.181367] ACPI: bus type pci registered
[ 0.199629] PCI: PCI BIOS revision 2.10 entry at 0xfdb02, last bus=2
[ 0.199703] PCI: Using configuration type 1 for base access
[ 0.201750] bio: create slab <bio-0> at 0
[ 0.204393] ACPI: EC: Look up EC in DSDT
[ 0.242172] ACPI: Interpreter enabled
[ 0.242285] ACPI: (supports S0)
[ 0.242416] ACPI: Using IOAPIC for interrupt routing
[ 0.304154] ACPI: No dock devices found.
[ 0.309382] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.309660] pci 0000:00:00.0: reg 10 32bit mmio pref: [0x000000-0xfffffff]
[ 0.309896] pci 0000:00:04.1: reg 20 io port: [0x1020-0x102f]
[ 0.310008] pci 0000:00:04.2: reg 20 io port: [0x1000-0x101f]
[ 0.310081] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
[ 0.310089] * this clock source is slow. Consider trying other clock sources
[ 0.310297] pci 0000:00:04.3: quirk: region 8000-803f claimed by PIIX4 ACPI
[ 0.310375] pci 0000:00:04.3: quirk: region 1040-104f claimed by PIIX4 SMB
[ 0.310631] pci 0000:00:08.0: reg 10 32bit mmio: [0xfa000000-0xfa000fff]
[ 0.310708] pci 0000:00:08.0: PME# supported from D0 D1 D3hot D3cold
[ 0.310784] pci 0000:00:08.0: PME# disabled
[ 0.310912] pci 0000:00:08.1: reg 10 32bit mmio: [0xfa001000-0xfa001fff]
[ 0.310987] pci 0000:00:08.1: PME# supported from D0 D1 D3hot D3cold
[ 0.311062] pci 0000:00:08.1: PME# disabled
[ 0.311189] pci 0000:00:08.2: reg 10 32bit mmio: [0xfa002000-0xfa002fff]
[ 0.311264] pci 0000:00:08.2: PME# supported from D0 D1 D3hot D3cold
[ 0.311339] pci 0000:00:08.2: PME# disabled
[ 0.311474] pci 0000:00:08.3: reg 10 32bit mmio: [0xfa004000-0xfa0040ff]
[ 0.311554] pci 0000:00:08.3: PME# supported from D0 D3hot D3cold
[ 0.311628] pci 0000:00:08.3: PME# disabled
[ 0.311840] pci 0000:00:09.1: reg 10 32bit mmio pref: [0xfa010000-0xfa01ffff]
[ 0.311907] pci 0000:00:09.1: reg 30 32bit mmio pref: [0x000000-0x007fff]
[ 0.312035] pci 0000:00:0d.0: reg 10 32bit mmio pref: [0xfc000000-0xfdffffff]
[ 0.312060] pci 0000:00:0d.0: reg 14 32bit mmio: [0xfa003000-0xfa003fff]
[ 0.312106] pci 0000:00:0d.0: reg 30 32bit mmio pref: [0x000000-0x007fff]
[ 0.312259] pci 0000:01:03.0: reg 10 32bit mmio pref: [0xfa500000-0xfa500fff]
[ 0.312285] pci 0000:01:03.0: reg 14 io port: [0x9400-0x941f]
[ 0.312309] pci 0000:01:03.0: reg 18 32bit mmio: [0xfa100000-0xfa1fffff]
[ 0.312353] pci 0000:01:03.0: reg 30 32bit mmio pref: [0x000000-0x0fffff]
[ 0.312447] pci 0000:01:04.0: reg 10 io port: [0x9000-0x90ff]
[ 0.312472] pci 0000:01:04.0: reg 14 32bit mmio: [0xfa201000-0xfa2010ff]
[ 0.312496] pci 0000:01:04.0: reg 18 32bit mmio: [0xfa200000-0xfa200fff]
[ 0.312623] pci 0000:00:07.0: bridge io port: [0x9000-0x9fff]
[ 0.312642] pci 0000:00:07.0: bridge 32bit mmio: [0xfa100000-0xfa2fffff]
[ 0.312665] pci 0000:00:07.0: bridge 64bit mmio pref: [0xfa500000-0xfa5fffff]
[ 0.312813] pci_bus 0000:00: on NUMA node 0
[ 0.312841] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.313426] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.318878] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.319929] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.321002] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
[ 0.322052] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.323093] vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.324028] vgaarb: loaded
[ 0.324309] PCI: Using ACPI for IRQ routing
[ 0.325014] Switching to clocksource tsc
[ 0.331279] pnp: PnP ACPI init
[ 0.331415] ACPI: bus type pnp registered
[ 0.498328] pnp: PnP ACPI: found 14 devices
[ 0.498399] ACPI: ACPI bus type pnp unregistered
[ 0.498472] PnPBIOS: Disabled by ACPI PNP
[ 0.498596] system 00:05: iomem range 0xfffd0000-0xfffeffff could not be reserved
[ 0.534796] pci 0000:01:03.0: BAR 6: can't allocate mem resource [0xfa600000-0xfa5fffff]
[ 0.534889] pci 0000:00:07.0: PCI bridge, secondary bus 0000:01
[ 0.534962] pci 0000:00:07.0: IO window: 0x9000-0x9fff
[ 0.535035] pci 0000:00:07.0: MEM window: 0xfa100000-0xfa2fffff
[ 0.535110] pci 0000:00:07.0: PREFETCH window: 0x000000fa500000-0x000000fa5fffff
[ 0.535199] pci 0000:00:09.0: PCI bridge, secondary bus 0000:02
[ 0.535266] pci 0000:00:09.0: IO window: disabled
[ 0.535336] pci 0000:00:09.0: MEM window: disabled
[ 0.535404] pci 0000:00:09.0: PREFETCH window: disabled
[ 0.535521] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.535538] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.535555] pci_bus 0000:01: resource 0 io: [0x9000-0x9fff]
[ 0.535571] pci_bus 0000:01: resource 1 mem: [0xfa100000-0xfa2fffff]
[ 0.535587] pci_bus 0000:01: resource 2 pref mem [0xfa500000-0xfa5fffff]
[ 0.535772] NET: Registered protocol family 2
[ 0.536377] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.538807] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.544632] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.547728] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.547818] TCP reno registered
[ 0.548466] NET: Registered protocol family 1
[ 0.548625] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.548924] pci 0000:00:0d.0: Boot video device
[ 0.548957] pci 0000:01:03.0: Firmware left e100 interrupts enabled; disabling
[ 0.549338] Unpacking initramfs...
[ 0.880507] Freeing initrd memory: 2194k freed
[ 0.893395] Simple Boot Flag at 0x35 set to 0x1
[ 0.894827] audit: initializing netlink socket (disabled)
[ 0.894953] type=2000 audit(1279064414.894:1): initialized
[ 0.895979] highmem bounce pool size: 64 pages
[ 0.896070] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.906685] VFS: Disk quotas dquot_6.5.2
[ 0.907137] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.907703] msgmni has been set to 1739
[ 0.909292] alg: No test for stdrng (krng)
[ 0.909562] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.909653] io scheduler noop registered
[ 0.909716] io scheduler anticipatory registered
[ 0.909780] io scheduler deadline registered
[ 0.910158] io scheduler cfq registered (default)
[ 0.911142] isapnp: Scanning for PnP cards...
[ 1.265628] isapnp: No Plug & Play device found
[ 1.276318] Linux agpgart interface v0.103
[ 1.277125] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.277449] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.277868] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.278373] serial8250: ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A
[ 1.279513] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.280133] 00:0a: ttyS3 at I/O 0x2e8 (irq = 10) is a 16550A
[ 1.280824] 00:0d: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.281692] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[ 1.284762] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.284861] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.285363] mice: PS/2 mouse device common for all mice
[ 1.285895] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.286039] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 1.286181] cpuidle: using governor ladder
[ 1.286248] cpuidle: using governor menu
[ 1.286328] No iBFT detected.
[ 1.288836] TCP cubic registered
[ 1.290003] NET: Registered protocol family 10
[ 1.293081] lo: Disabled Privacy Extensions
[ 1.295252] Mobile IPv6
[ 1.295322] NET: Registered protocol family 17
[ 1.295461] Using IPI No-Shortcut mode
[ 1.296050] PM: Resume from disk failed.
[ 1.296089] registered taskstats version 1
[ 1.296953] rtc_cmos 00:02: setting system clock to 2010-07-13 23:40:16 UTC (1279064416)
[ 1.297187] Initalizing network drop monitor service
[ 1.297404] Freeing unused kernel memory: 372k freed
[ 1.299558] Write protecting the kernel text: 2492k
[ 1.299742] Write protecting the kernel read-only data: 916k
[ 1.303621] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.624604] SCSI subsystem initialized
[ 1.645058] megaraid_legacy 0000:00:09.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.645166] megaraid: found 0x8086:0x1960:bus 0:slot 9:func 1
[ 1.645585] scsi0:Found MegaRAID controller at 0xf7c88000, IRQ:17
[ 1.722104] megaraid: [F :B ] detected 2 logical drives.
[ 1.800225] megaraid: channel[0] is raid.
[ 1.859945] scsi0 : LSI Logic MegaRAID F 254 commands 16 targs 4 chans 7 luns
[ 1.861671] scsi0: scanning scsi channel 0 for logical drives.
[ 1.862491] scsi 0:0:0:0: Direct-Access MegaRAID LD0 RAID1 21000R F PQ: 0 ANSI: 2
[ 1.863558] scsi 0:0:1:0: Direct-Access MegaRAID LD1 RAID0 27462R F PQ: 0 ANSI: 2
[ 1.875956] scsi0: scanning scsi channel 4 [P0] for physical devices.
[ 5.817202] sd 0:0:0:0: [sda] 43008000 512-byte logical blocks: (22.0 GB/20.5 GiB)
[ 5.817409] sd 0:0:0:0: [sda] Write Protect is off
[ 5.817485] sd 0:0:0:0: [sda] Mode Sense: 00 00 00 00
[ 5.817584] sd 0:0:0:0: [sda] Asking for cache data failed
[ 5.817658] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 5.818110] sd 0:0:1:0: [sdb] 56242176 512-byte logical blocks: (28.7 GB/26.8 GiB)
[ 5.818439] sd 0:0:0:0: [sda] Asking for cache data failed
[ 5.818518] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 5.818598] sda: sda1 sda2 sda3 sda4 <
[ 5.819726] sd 0:0:1:0: [sdb] Write Protect is off
[ 5.819847] sd 0:0:1:0: [sdb] Mode Sense: 00 00 00 00
[ 5.820402] sd 0:0:1:0: [sdb] Asking for cache data failed
[ 5.820477] sd 0:0:1:0: [sdb] Assuming drive cache: write through
[ 5.821333] sd 0:0:1:0: [sdb] Asking for cache data failed
[ 5.821409] sd 0:0:1:0: [sdb] Assuming drive cache: write through
[ 5.821483] sdb: sda5 sdb1 sdb2
[ 5.829809] sd 0:0:1:0: [sdb] Asking for cache data failed
[ 5.829885] sd 0:0:1:0: [sdb] Assuming drive cache: write through
[ 5.829957] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 5.837891] sda6 >
[ 5.840307] sd 0:0:0:0: [sda] Asking for cache data failed
[ 5.840382] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 5.840455] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.775298] JFS: nTxBlock = 8081, nTxLock = 64648
[ 9.268938] udevd version 125 started
[ 12.912609] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 15.061398] usbcore: registered new interface driver usbfs
[ 15.061645] usbcore: registered new interface driver hub
[ 15.081615] usbcore: registered new device driver usb
[ 15.169897] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 15.257834] Floppy drive(s): fd0 is 1.44M
[ 15.287397] FDC 0 is a National Semiconductor PC87306
[ 15.345897] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 15.681598] uhci_hcd: USB Universal Host Controller Interface driver
[ 15.682003] uhci_hcd 0000:00:04.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 15.682114] uhci_hcd 0000:00:04.2: UHCI Host Controller
[ 15.682368] uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1
[ 15.682594] uhci_hcd 0000:00:04.2: irq 19, io base 0x00001000
[ 15.682939] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 15.683025] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 15.683115] usb usb1: Product: UHCI Host Controller
[ 15.683189] usb usb1: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 15.683264] usb usb1: SerialNumber: 0000:00:04.2
[ 15.683832] usb usb1: configuration #1 chosen from 1 choice
[ 15.720187] hub 1-0:1.0: USB hub found
[ 15.720324] hub 1-0:1.0: 2 ports detected
[ 15.753104] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 15.753302] ohci_hcd 0000:00:08.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 15.753438] ohci_hcd 0000:00:08.0: OHCI Host Controller
[ 15.753563] ohci_hcd 0000:00:08.0: new USB bus registered, assigned bus number 2
[ 15.753747] ohci_hcd 0000:00:08.0: irq 17, io mem 0xfa000000
[ 15.814211] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 15.814313] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 15.814414] usb usb2: Product: OHCI Host Controller
[ 15.814489] usb usb2: Manufacturer: Linux 2.6.32-5-686 ohci_hcd
[ 15.814568] usb usb2: SerialNumber: 0000:00:08.0
[ 15.815236] usb usb2: configuration #1 chosen from 1 choice
[ 15.815513] hub 2-0:1.0: USB hub found
[ 15.815656] hub 2-0:1.0: 2 ports detected
[ 15.816077] ohci_hcd 0000:00:08.1: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 15.816227] ohci_hcd 0000:00:08.1: OHCI Host Controller
[ 15.817358] ohci_hcd 0000:00:08.1: new USB bus registered, assigned bus number 3
[ 15.817570] ohci_hcd 0000:00:08.1: irq 18, io mem 0xfa001000
[ 15.824111] hub 1-0:1.0: over-current change on port 1
[ 15.863904] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 15.863998] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 15.884850] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 15.884940] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 15.885024] usb usb3: Product: OHCI Host Controller
[ 15.885099] usb usb3: Manufacturer: Linux 2.6.32-5-686 ohci_hcd
[ 15.885175] usb usb3: SerialNumber: 0000:00:08.1
[ 15.885792] usb usb3: configuration #1 chosen from 1 choice
[ 15.886072] hub 3-0:1.0: USB hub found
[ 15.886208] hub 3-0:1.0: 2 ports detected
[ 15.886703] ehci_hcd 0000:00:08.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 15.886876] ehci_hcd 0000:00:08.3: EHCI Host Controller
[ 15.887012] ehci_hcd 0000:00:08.3: new USB bus registered, assigned bus number 4
[ 15.887237] ehci_hcd 0000:00:08.3: debug port 1
[ 15.909224] ehci_hcd 0000:00:08.3: irq 16, io mem 0xfa004000
[ 15.921290] ehci_hcd 0000:00:08.3: USB 2.0 started, EHCI 1.00
[ 15.921555] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 15.921645] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 15.921737] usb usb4: Product: EHCI Host Controller
[ 15.921818] usb usb4: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 15.921895] usb usb4: SerialNumber: 0000:00:08.3
[ 15.922498] usb usb4: configuration #1 chosen from 1 choice
[ 15.922808] hub 4-0:1.0: USB hub found
[ 15.922930] hub 4-0:1.0: 6 ports detected
[ 15.923418] ohci_hcd 0000:00:08.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 15.923591] ohci_hcd 0000:00:08.2: OHCI Host Controller
[ 15.923726] ohci_hcd 0000:00:08.2: new USB bus registered, assigned bus number 5
[ 15.923895] ohci_hcd 0000:00:08.2: irq 19, io mem 0xfa002000
[ 15.928100] hub 1-0:1.0: over-current change on port 2
[ 16.158530] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 16.158626] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 16.158708] usb usb5: Product: OHCI Host Controller
[ 16.158777] usb usb5: Manufacturer: Linux 2.6.32-5-686 ohci_hcd
[ 16.158845] usb usb5: SerialNumber: 0000:00:08.2
[ 16.159460] usb usb5: configuration #1 chosen from 1 choice
[ 16.159769] hub 5-0:1.0: USB hub found
[ 16.159892] hub 5-0:1.0: 2 ports detected
[ 16.649100] libata version 3.00 loaded.
[ 17.721366] piix4_smbus 0000:00:04.3: Host SMBus controller not enabled!
[ 17.972990] processor LNXCPU:00: registered as cooling_device0
[ 17.973349] processor LNXCPU:01: registered as cooling_device1
[ 18.150938] parport_pc 00:0b: reported by Plug and Play ACPI
[ 18.151085] parport0: PC-style at 0x378, irq 7 [PCSPP]
[ 18.284802] ata_piix 0000:00:04.1: version 2.13
[ 18.301421] scsi1 : ata_piix
[ 18.313158] scsi2 : ata_piix
[ 18.313557] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1020 irq 14
[ 18.313639] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1028 irq 15
[ 18.344238] ata2: port disabled. ignoring.
[ 18.508600] ata1.00: ATAPI: CD-ROM CDR_U240, 1.09, max MWDMA2
[ 18.524426] ata1.00: configured for MWDMA2
[ 18.526045] scsi 1:0:0:0: CD-ROM TORiSAN CD-ROM CDR_U240 1.09 PQ: 0 ANSI: 5
[ 19.013810] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 19.013915] e100: Copyright(c) 1999-2006 Intel Corporation
[ 19.014181] e100 0000:01:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 19.407412] e100: eth0: e100_probe: addr 0xfa500000, irq 19, MAC addr 00:a0:c9:dd:5f:e2
[ 19.407642] sym53c8xx 0000:01:04.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 19.565278] sym0: <895> rev 0x1 at pci 0000:01:04.0 irq 18
[ 19.707972] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
[ 20.054201] sym0: Symbios NVRAM, ID 7, Fast-40, SE, parity checking
[ 20.054289] sym0: open drain IRQ line driver, using on-chip SRAM
[ 20.054357] sym0: using LOAD/STORE-based firmware.
[ 20.056025] sym0: SCSI BUS has been reset.
[ 20.061171] sym0: SCSI BUS mode change from SE to SE.
[ 20.061205] scsi3 : sym-2.2.3
[ 20.063509] sym0: SCSI BUS has been reset.
[ 20.516979] Error: Driver 'pcspkr' is already registered, aborting...
[ 22.761590] sr0: scsi3-mmc drive: 10x/23x xa/form2 cdda tray
[ 22.761687] Uniform CD-ROM driver Revision: 3.20
[ 22.762335] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 23.054001] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 23.054337] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 23.054637] sr 1:0:0:0: Attached scsi generic sg2 type 5
[ 25.928776] loop: module loaded
[ 26.129740] lp0: using parport0 (interrupt-driven).
[ 26.579855] device-mapper: uevent: version 1.0.3
[ 26.580865] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 28.251537] padlock: VIA PadLock not detected.
[ 30.156628] padlock: VIA PadLock Hash Engine not detected.
[ 54.234698] Adding 489972k swap on /dev/mapper/sda2_crypt. Priority:-1 extents:1 across:489972k
[ 57.222059] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 57.576675] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 58.082522] Netfilter messages via NETLINK v0.30.
[ 58.337487] nf_conntrack version 0.5.0 (16162 buckets, 64648 max)
[ 58.341299] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 58.341318] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[ 58.341331] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 60.758577] ctnetlink v0.93: registering with nfnetlink.
[ 62.136871] ClusterIP Version 0.8 loaded successfully
[ 95.954665] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 110.624360] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
Contents of Mail Box Structure
Fw Command = 0x02
Cmd Sequence = 0x7a
No of Sectors= 0008
LBA = 0xeeba7
DTA = 0x36620000
Logical Drive= 0x00
No of SG Elmt= 0x00
Busy = 0
Status = 0x00
Logical drive: 0:, state: optimal
Span depth: 1, RAID level: 1, Stripe size: 64, Row size: 2
Read Policy: Adaptive, Write Policy: Write thru, Cache Policy: Cached IO
Logical drive: 1:, state: optimal
Span depth: 0, RAID level: 0, Stripe size:128, Row size: 0
Read Policy: No read ahead, Write Policy: Write thru, Cache Policy: Cached IO
Rebuild Rate: [50%]
Statistical Information for this controller
pend_cmds = 0
IO and error counters not compiled in driver.
Reply to: