Bug#588741: linux-image-2.6.26-2-powerpc64: Kernel does not boot. Failed to initialize the SCSI-system.
Package: linux-2.6
Version: 2.6.26-24
Severity: critical
Justification: breaks the whole system
The SCSI system is not propery intitialized or detected, since during boot the kernel tries to reset the various devices, but does not accomplish anything.
The older kernel Linux version 2.6.18-6-powerpc64 (Debian 2.6.18.dfsg.1-26etch2) (dannf@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Sun Feb 21 07:23:23 UTC 2010 works fine.
-- Package-specific info:
** Kernel log: boot messages should be attached
** Model information
revision : 1.4 (pvr 0041 0104)
revision : 1.4 (pvr 0041 0104)
platform : pSeries
machine : CHRP IBM,7026-B80
** PCI devices:
00:0b.0 ISA bridge [0601]: Symphony Labs W83C553F/W83C554F [10ad:0565] (rev 10)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:0c.0 Ethernet controller [0200]: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] [1022:2000] (rev 26)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 72 (1500ns min, 63750ns max)
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at f8ffe800 [size=32]
Region 1: Memory at c4477000 (32-bit, non-prefetchable) [size=32]
Expansion ROM at c4300000 [disabled] [size=1M]
Kernel driver in use: pcnet32
Kernel modules: pcnet32
00:0d.0 SSA [0c02]: IBM SSA Adapter [Advanced SerialRAID/X] [1014:0058] (rev 06)
Subsystem: IBM Device [1014:0091]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 18
BIST result: 00
Region 0: I/O ports at f8fff000 [disabled] [size=256]
Region 1: Memory at c3800000 (32-bit, prefetchable) [disabled] [size=8M]
Region 2: Memory at c4468000 (32-bit, prefetchable) [disabled] [size=32K]
Region 3: Memory at c4420000 (32-bit, prefetchable) [disabled] [size=128K]
Region 4: Memory at c4200000 (32-bit, prefetchable) [disabled] [size=1M]
Expansion ROM at c4460000 [disabled] [size=32K]
00:0e.0 SSA [0c02]: IBM SSA Adapter [Advanced SerialRAID/X] [1014:0058] (rev 06)
Subsystem: IBM Device [1014:0091]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 19
BIST result: 00
Region 0: I/O ports at f8fff400 [disabled] [size=256]
Region 1: Memory at c3000000 (32-bit, prefetchable) [disabled] [size=8M]
Region 2: Memory at c4458000 (32-bit, prefetchable) [disabled] [size=32K]
Region 3: Memory at c4400000 (32-bit, prefetchable) [disabled] [size=128K]
Region 4: Memory at c4100000 (32-bit, prefetchable) [disabled] [size=1M]
Expansion ROM at c4450000 [disabled] [size=32K]
00:0f.0 VGA compatible controller [0300]: Matrox Graphics, Inc. MGA G200 [102b:0520] (rev 01) (prog-if 00 [VGA controller])
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 20
Region 0: Memory at c0000000 (32-bit, prefetchable) [size=16M]
Region 1: Memory at c2800000 (32-bit, non-prefetchable) [size=16K]
Region 2: Memory at c2000000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at c4440000 [disabled] [size=64K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.0 Ethernet controller [0200]: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] [1022:2000] (rev 26)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 72 (1500ns min, 63750ns max)
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at f8ffec00 [size=32]
Region 1: Memory at c4476000 (32-bit, non-prefetchable) [size=32]
Expansion ROM at c4000000 [disabled] [size=1M]
Kernel driver in use: pcnet32
Kernel modules: pcnet32
00:11.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic 53C896/897 [1000:000b] (rev 07)
Subsystem: LSI Logic / Symbios Logic LSI53C896/7 PCI to Dual Channel Ultra2 SCSI Multifunction Controller [1000:1000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 72 (4250ns min, 16000ns max), Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at f8fff800 [size=256]
Region 1: Memory at c4475000 (64-bit, non-prefetchable) [size=1K]
Region 3: Memory at c4472000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: sym53c8xx
Kernel modules: sym53c8xx
00:11.1 SCSI storage controller [0100]: LSI Logic / Symbios Logic 53C896/897 [1000:000b] (rev 07)
Subsystem: LSI Logic / Symbios Logic LSI53C896/7 PCI to Dual Channel Ultra2 SCSI Multifunction Controller [1000:1000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 72 (4250ns min, 16000ns max), Cache Line Size: 128 bytes
Interrupt: pin B routed to IRQ 23
Region 0: I/O ports at f8fffc00 [size=256]
Region 1: Memory at c4474000 (64-bit, non-prefetchable) [size=1K]
Region 3: Memory at c4470000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: sym53c8xx
Kernel modules: sym53c8xx
** USB devices:
-- System Information:
Debian Release: 5.0.5
APT prefers stable
APT policy: (500, 'stable')
Architecture: powerpc (ppc64)
Kernel: Linux 2.6.18-6-powerpc64 (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-2-powerpc64 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
linux-image-2.6.26-2-powerpc64 recommends no packages.
Versions of packages linux-image-2.6.26-2-powerpc64 suggests:
pn linux-doc-2.6.26 <none> (no description available)
pn mkvmlinuz <none> (no description available)
Versions of packages linux-image-2.6.26-2-powerpc64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
-- debconf information:
linux-image-2.6.26-2-powerpc64/prerm/would-invalidate-boot-loader-2.6.26-2-powerpc64: true
linux-image-2.6.26-2-powerpc64/preinst/abort-overwrite-2.6.26-2-powerpc64:
linux-image-2.6.26-2-powerpc64/preinst/overwriting-modules-2.6.26-2-powerpc64: true
linux-image-2.6.26-2-powerpc64/postinst/old-dir-initrd-link-2.6.26-2-powerpc64: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-2-powerpc64/prerm/removing-running-kernel-2.6.26-2-powerpc64: true
linux-image-2.6.26-2-powerpc64/preinst/bootloader-initrd-2.6.26-2-powerpc64: true
linux-image-2.6.26-2-powerpc64/preinst/elilo-initrd-2.6.26-2-powerpc64: true
linux-image-2.6.26-2-powerpc64/postinst/depmod-error-initrd-2.6.26-2-powerpc64: false
linux-image-2.6.26-2-powerpc64/preinst/failed-to-move-modules-2.6.26-2-powerpc64:
linux-image-2.6.26-2-powerpc64/preinst/lilo-initrd-2.6.26-2-powerpc64: true
linux-image-2.6.26-2-powerpc64/postinst/bootloader-error-2.6.26-2-powerpc64:
linux-image-2.6.26-2-powerpc64/postinst/old-initrd-link-2.6.26-2-powerpc64: true
linux-image-2.6.26-2-powerpc64/postinst/bootloader-test-error-2.6.26-2-powerpc64:
linux-image-2.6.26-2-powerpc64/postinst/old-system-map-link-2.6.26-2-powerpc64: true
linux-image-2.6.26-2-powerpc64/preinst/abort-install-2.6.26-2-powerpc64:
linux-image-2.6.26-2-powerpc64/preinst/lilo-has-ramdisk:
linux-image-2.6.26-2-powerpc64/postinst/kimage-is-a-directory:
linux-image-2.6.26-2-powerpc64/preinst/initrd-2.6.26-2-powerpc64:
linux-image-2.6.26-2-powerpc64/postinst/create-kimage-link-2.6.26-2-powerpc64: true
linux-image-2.6.26-2-powerpc64/postinst/depmod-error-2.6.26-2-powerpc64: false
Reply to: