Bug#582177: initramfs-tools: fails to load ram... /proc/mdstat
>
>Looks ok. /dev/sda is the device you're booting from?
I don't know. The bios is set to boot from SAS disk 0 which is **usually**
/dev/sda; however, when my firewire drive is connected, on boot all the drives
are shifted one drive letter.
/dev/sda => /dev/sdb
/dev/sdb => /dev/sdc ... etc
>
>What could be worth a try (unless grub devs show up):
>
>* try initramfs-tools >= 0.95.1
>* try removing all devices except one disk from the raid1 array
> and try booting from the single disk then
>
Uhhh? I use this computer on a daily basis! You are going to have to
convince me before I experiment anymore.
For trying a new initramfs-tools, I don't think I will be doing that at all.
For removing all devices from the raid1 array, see the previous paragraph...
C. Cropper
Reply to: