Your message dated Wed, 28 Apr 2010 12:20:10 +0200 with message-id <20100428102010.GA4865@resivo.wgnet.de> and subject line Re: [pkg-cryptsetup-devel] Resolved for me (Was: Re: Bug#568008: ...) has caused the Debian Bug report #568008, regarding linux-image-2.6.30-2-686: aes.ko depends on device specific padlock-aes.ko to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 568008: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=568008 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: linux-image-2.6.30-2-686: aes.ko depends on device specific padlock-aes.ko
- From: Jelle de Jong <jelledejong@powercraft.nl>
- Date: Fri, 22 Jan 2010 21:06:01 +0100
- Message-id: <4B5A0529.5040703@powercraft.nl>
Package: linux-image-2.6.30-2-686 Version: 2.6.30-8squeeze1 Severity: normal Waiting for /dev to be fully populated...modprobe: WARNING: Error inserting padlock_aes (/lib/modules/2.6.30-2-686/kernel/drivers/crypto/padlock-aes.ko): No such device # uname -a Linux alix07 2.6.30-2-686 #1 SMP Fri Dec 4 00:53:20 UTC 2009 i586 GNU/Linux # modprobe --show-depends aes insmod /lib/modules/2.6.30-2-686/kernel/crypto/aes_generic.ko insmod /lib/modules/2.6.30-2-686/kernel/drivers/crypto/padlock-aes.ko insmod /lib/modules/2.6.30-2-686/kernel/crypto/aes_generic.ko insmod /lib/modules/2.6.30-2-686/kernel/arch/x86/crypto/aes-i586.ko insmod /lib/modules/2.6.30-2-686/kernel/crypto/aes_generic.ko -- Package-specific info: ** Version: Linux version 2.6.30-2-686 (Debian 2.6.30-8squeeze1) (dannf@debian.org) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Fri Dec 4 00:53:20 UTC 2009 ** Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.30-2-686 root=UUID=a8776f1f-9454-4b64-940d-9ac7a8cbe639 ro init=/sbin/bootchartd elevator=deadline acpi=off ipv6.disable=1 console=ttyS0,115200 quiet ** Not tainted ** Kernel log: [ 1.186897] Uniform Multi-Platform E-IDE driver [ 1.194461] amd74xx 0000:00:0f.2: UDMA100 controller [ 1.194485] amd74xx 0000:00:0f.2: IDE controller (0x1022:0x209a rev 0x01) [ 1.194548] amd74xx 0000:00:0f.2: IDE port disabled [ 1.194607] amd74xx 0000:00:0f.2: not 100% native mode: will probe irqs later [ 1.194637] ide0: BM-DMA at 0xff00-0xff07 [ 1.194660] Probing IDE interface ide0... [ 1.480086] hda: CF CARD 4GB, CFA DISK drive [ 2.152143] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO5 [ 2.152427] hda: host side 80-wire cable detection failed, limiting max speed to UDMA33 [ 2.152446] hda: UDMA/33 mode selected [ 2.152736] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 2.581360] ide-gd driver 1.18 [ 2.581478] hda: max request size: 128KiB [ 2.581497] hda: 7847280 sectors (4017 MB) w/1KiB Cache, CHS=7785/16/63 [ 2.581678] hda: hda1 [ 3.704113] kjournald starting. Commit interval 5 seconds [ 3.704154] EXT3-fs: mounted filesystem with ordered data mode. [ 6.745041] udevd version 125 started [ 12.314647] AMD Geode RNG detected [ 12.523132] cs5535_gpio: base=0x6100 mask=0xb003c66 major=252 [ 12.697696] input: PC Speaker as /devices/platform/pcspkr/input/input0 [ 12.933276] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker [ 12.933364] via-rhine 0000:00:09.0: setting latency timer to 64 [ 12.940310] eth0: VIA Rhine III (Management Adapter) at 0x11000, 00:0d:b9:1b:55:c8, IRQ 10. [ 12.941049] eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000. [ 12.941116] via-rhine 0000:00:0a.0: setting latency timer to 64 [ 12.948038] eth1: VIA Rhine III (Management Adapter) at 0x11400, 00:0d:b9:1b:55:c9, IRQ 11. [ 12.948774] eth1: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000. [ 13.762446] usbcore: registered new interface driver usbfs [ 13.762590] usbcore: registered new interface driver hub [ 13.779415] usbcore: registered new device driver usb [ 13.799088] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 13.832070] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 14.675647] padlock: VIA PadLock not detected. [ 15.603453] geode-aes: GEODE AES engine enabled. [ 15.604749] ehci_hcd 0000:00:0f.5: setting latency timer to 64 [ 15.604774] ehci_hcd 0000:00:0f.5: EHCI Host Controller [ 15.604954] ehci_hcd 0000:00:0f.5: new USB bus registered, assigned bus number 1 [ 15.627344] ehci_hcd 0000:00:0f.5: irq 12, io mem 0xefffd000 [ 15.639256] ehci_hcd 0000:00:0f.5: USB 2.0 started, EHCI 1.00 [ 15.639355] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 15.639377] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 15.639398] usb usb1: Product: EHCI Host Controller [ 15.639415] usb usb1: Manufacturer: Linux 2.6.30-2-686 ehci_hcd [ 15.639432] usb usb1: SerialNumber: 0000:00:0f.5 [ 15.639800] usb usb1: configuration #1 chosen from 1 choice [ 15.639988] hub 1-0:1.0: USB hub found [ 15.640031] hub 1-0:1.0: 4 ports detected [ 15.641939] ohci_hcd 0000:00:0f.4: setting latency timer to 64 [ 15.641965] ohci_hcd 0000:00:0f.4: OHCI Host Controller [ 15.642133] ohci_hcd 0000:00:0f.4: new USB bus registered, assigned bus number 2 [ 15.642196] ohci_hcd 0000:00:0f.4: irq 12, io mem 0xefffe000 [ 15.727115] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 15.727140] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 15.727160] usb usb2: Product: OHCI Host Controller [ 15.727202] usb usb2: Manufacturer: Linux 2.6.30-2-686 ohci_hcd [ 15.727220] usb usb2: SerialNumber: 0000:00:0f.4 [ 15.727602] usb usb2: configuration #1 chosen from 1 choice [ 15.727790] hub 2-0:1.0: USB hub found [ 15.727834] hub 2-0:1.0: 4 ports detected [ 16.255229] usb 2-2: new full speed USB device using ohci_hcd and address 2 [ 16.462110] usb 2-2: New USB device found, idVendor=03f0, idProduct=1e1d [ 16.462135] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 16.462156] usb 2-2: Product: HP hs2300 HSDPA Broadband Wireless Module [ 16.462175] usb 2-2: Manufacturer: HP [ 16.462522] usb 2-2: configuration #1 chosen from 1 choice [ 17.849899] usbcore: registered new interface driver usbserial [ 17.849979] USB Serial support registered for generic [ 17.850090] usbcore: registered new interface driver usbserial_generic [ 17.850106] usbserial: USB Serial Driver core [ 17.899542] USB Serial support registered for Sierra USB modem [ 17.899644] sierra 2-2:1.0: Sierra USB modem converter detected [ 17.908375] usb 2-2: Sierra USB modem converter now attached to ttyUSB0 [ 17.908610] usb 2-2: Sierra USB modem converter now attached to ttyUSB1 [ 17.908822] usb 2-2: Sierra USB modem converter now attached to ttyUSB2 [ 17.908901] usbcore: registered new interface driver sierra [ 17.908916] sierra: v.1.3.3:USB Driver for Sierra Wireless USB modems [ 18.213515] EXT3 FS on hda1, internal journal [ 18.733847] leds_alix2: system is recognized as "PC Engines ALIX.2" [ 18.734077] Registered led device: alix:1 [ 18.734164] Registered led device: alix:2 [ 18.734248] Registered led device: alix:3 [ 20.678047] PPP generic driver version 2.4.2 [ 21.900864] nf_conntrack version 0.5.0 (4096 buckets, 16384 max) [ 21.901266] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 21.901283] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or [ 21.901300] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 22.219663] ip_tables: (C) 2000-2006 Netfilter Core Team [ 25.441276] Bridge firewalling registered [ 25.494540] device eth0 entered promiscuous mode [ 25.528203] eth0: link down [ 26.373187] device eth1 entered promiscuous mode [ 26.380352] eth1: link down [ 30.576626] warning: `ntpd' uses 32-bit capabilities (legacy support in use) [ 30.836685] tun: Universal TUN/TAP device driver, 1.6 [ 30.836703] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 30.882636] device tun0 entered promiscuous mode [ 37.909091] br0: port 3(tun0) entering learning state [ 40.905883] br0: port 3(tun0) entering forwarding state ** Loaded modules: Module Size Used by tun 11176 2 bridge 39836 0 stp 2112 1 bridge ipt_MASQUERADE 2368 1 ipt_LOG 4540 3 ppp_async 7524 1 crc_ccitt 1816 1 ppp_async xt_tcpudp 2508 8 xt_state 1768 8 iptable_filter 2956 1 iptable_mangle 3264 0 iptable_nat 5020 1 ip_tables 10188 3 iptable_filter,iptable_mangle,iptable_nat nf_nat 16092 2 ipt_MASQUERADE,iptable_nat x_tables 14108 6 ipt_MASQUERADE,ipt_LOG,xt_tcpudp,xt_state,iptable_nat,ip_tables nf_conntrack_ipv4 11928 11 iptable_nat,nf_nat nf_conntrack 57728 5 ipt_MASQUERADE,xt_state,iptable_nat,nf_nat,nf_conntrack_ipv4 nf_defrag_ipv4 1664 1 nf_conntrack_ipv4 ppp_generic 21416 5 ppp_async slhc 5016 1 ppp_generic ledtrig_timer 2692 0 leds_alix2 2304 0 led_class 3852 1 leds_alix2 sierra 8936 1 usbserial 27392 3 sierra ecb 2368 0 aes_i586 8092 0 aes_generic 27436 1 aes_i586 evdev 8028 0 ohci_hcd 19800 0 ehci_hcd 29616 0 usbcore 125852 5 sierra,usbserial,ohci_hcd,ehci_hcd geode_aes 5324 0 via_rhine 18608 0 mii 4664 1 via_rhine pcspkr 2104 0 cs5535_gpio 3480 0 geode_rng 1648 0 rng_core 3672 1 geode_rng ext3 106844 1 jbd 40856 1 ext3 mbcache 6924 1 ext3 ide_gd_mod 19820 2 ide_pci_generic 3632 0 cs5536 3896 0 amd74xx 5428 1 ide_core 87676 4 ide_gd_mod,ide_pci_generic,cs5536,amd74xx ata_generic 4340 0 libata 150808 1 ata_generic scsi_mod 131572 1 libata ** PCI devices: 00:01.0 Host bridge [0600]: Advanced Micro Devices [AMD] CS5536 [Geode companion] Host Bridge [1022:2080] (rev 33) Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] Host Bridge [1022:2080] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 248, Cache Line Size: 32 bytes Region 0: I/O ports at ac1c [size=4] 00:01.2 Entertainment encryption device [1010]: Advanced Micro Devices [AMD] Geode LX AES Security Block [1022:2082] Subsystem: Advanced Micro Devices [AMD] Geode LX AES Security Block [1022:2082] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 9 Region 0: Memory at efff4000 (32-bit, non-prefetchable) [size=16K] Kernel driver in use: Geode LX AES Kernel modules: geode-aes, geode-rng 00:09.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6105M [Rhine-III] [1106:3053] (rev 96) Subsystem: VIA Technologies, Inc. Device [1106:0106] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (750ns min, 2000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at 1000 [size=256] Region 1: Memory at e0000000 (32-bit, non-prefetchable) [size=256] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: via-rhine Kernel modules: via-rhine 00:0a.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6105M [Rhine-III] [1106:3053] (rev 96) Subsystem: VIA Technologies, Inc. Device [1106:0106] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (750ns min, 2000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at 1400 [size=256] Region 1: Memory at e0040000 (32-bit, non-prefetchable) [size=256] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: via-rhine Kernel modules: via-rhine 00:0f.0 ISA bridge [0601]: Advanced Micro Devices [AMD] CS5536 [Geode companion] ISA [1022:2090] (rev 03) Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] ISA [1022:2090] Control: I/O+ Mem- BusMaster- SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Region 0: I/O ports at 6000 [size=8] Region 1: I/O ports at 6100 [size=256] Region 2: I/O ports at 6200 [size=64] Region 3: I/O ports at <unassigned> Region 4: I/O ports at 9d00 [size=128] Region 5: I/O ports at 9c00 [size=64] Kernel modules: cs5535_gpio 00:0f.2 IDE interface [0101]: Advanced Micro Devices [AMD] CS5536 [Geode companion] IDE [1022:209a] (rev 01) (prog-if 80 [Master]) Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] IDE [1022:209a] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 248, Cache Line Size: 32 bytes Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1] Region 4: I/O ports at ff00 [size=16] Kernel driver in use: AMD_IDE Kernel modules: amd74xx, cs5536 00:0f.4 USB Controller [0c03]: Advanced Micro Devices [AMD] CS5536 [Geode companion] OHC [1022:2094] (rev 02) (prog-if 10 [OHCI]) Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] OHC [1022:2094] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin D routed to IRQ 12 Region 0: Memory at efffe000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:0f.5 USB Controller [0c03]: Advanced Micro Devices [AMD] CS5536 [Geode companion] EHC [1022:2095] (rev 02) (prog-if 20 [EHCI]) Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] EHC [1022:2095] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin D routed to IRQ 12 Region 0: Memory at efffd000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd ** Sound cards: -- System Information: Debian Release: 5.0.3 APT prefers stable APT policy: (990, 'stable'), (500, 'unstable'), (500, 'testing') Architecture: i386 (i586) Kernel: Linux 2.6.30-2-686 (SMP w/1 CPU core) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.30-2-686 depends on: ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs ii module-init-tools 3.4-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.30-2-686 recommends: ii libc6-i686 2.7-18lenny2 GNU C Library: Shared libraries [i Versions of packages linux-image-2.6.30-2-686 suggests: ii grub-pc [grub] 1.96+20080724-16 GRand Unified Bootloader, version pn linux-doc-2.6.30 <none> (no description available) -- debconf information excluded
--- End Message ---
--- Begin Message ---
- To: "Mader, Alexander (N-MSR)" <Alexander.Mader@niles.de>
- Cc: 568008-done@bugs.debian.org
- Subject: Re: [pkg-cryptsetup-devel] Resolved for me (Was: Re: Bug#568008: ...)
- From: Jonas Meurer <jonas@freesources.org>
- Date: Wed, 28 Apr 2010 12:20:10 +0200
- Message-id: <20100428102010.GA4865@resivo.wgnet.de>
- In-reply-to: <4BD68C0D.4050503@niles.de>
- References: <4BBECEA7.3080300@niles.de> <4BD68C0D.4050503@niles.de>
On 27/04/2010 Mader, Alexander (N-MSR) wrote: > Hello, > > apparently the default encryption in cryptsetup changed with some > update. After adding "cipher=<cipher>" to /etc/crypttab the > cryptsetup worked correctly. yes, that is documented in /usr/share/doc/cryptsetup/NEWS.Debian.gz. closing this bug. thanks for further debugging. > The kernel module error message remains but that's not important for > me any more :-) that's another known issue. it can be ignored. greetings, jonasAttachment: signature.asc
Description: Digital signature
--- End Message ---