Your message dated Tue, 06 Apr 2010 04:23:30 +0100 with message-id <1270524210.24287.112.camel@localhost> and subject line Re: linux-image-2.6.26-1-amd64: combination of kernel amd64 and 6G memory by using a lvm in a software raid creates a kernel panic has caused the Debian Bug report #515514, regarding linux-image-2.6.26-1-amd64: combination of kernel amd64 and 6G memory by using a lvm in a software raid creates a kernel panic to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 515514: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=515514 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.26-1-amd64: combination of kernel amd64 and 6G memory by using a lvm in a software raid creates a kernel panic
- From: Jochen Becker <jochen@it4free.de>
- Date: Sun, 15 Feb 2009 22:37:15 +0100
- Message-id: <20090215213715.28984.34377.reportbug@camelot.remotehost.eu>
Package: linux-image-2.6.26-1-amd64 Version: 2.6.26-13 Severity: critical Justification: breaks the whole system by copying data from one software raid device into annother a kernel panic comes up newstorage 2 harddiscs wdc 750 ayps combined with software raid 1 into software raid lvm pv and into this ext3 filesystems old storage 2 harddisks samsung 400 software raid1 into it ext3 file system nolvm copying data from old stroage to new storage failed i removed 2G memory so that there will be only 4 in the system and mounted the old filesystem as ext2 and everything works fine. it is a productive system so i will not test it any more with more than 4 G memory -- Package-specific info: ** Version: Linux version 2.6.26-1-amd64 (Debian 2.6.26-13) (waldi@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Sat Jan 10 17:57:00 UTC 2009 ** Command line: root=/dev/mapper/vgcamelot-lvmRoot ro quiet ** Tainted: P (1) ** Kernel log: [ 10.062847] raid1: raid set md0 active with 2 out of 2 mirrors [ 10.062847] md: md2 stopped. [ 10.127932] md: bind<sdb3> [ 10.127932] md: bind<sda3> [ 10.136134] raid1: raid set md2 active with 2 out of 2 mirrors [ 10.136134] md: md1 stopped. [ 10.211307] md: bind<sdb2> [ 10.211502] md: bind<sda2> [ 10.218256] raid1: raid set md1 active with 2 out of 2 mirrors [ 10.290730] device-mapper: uevent: version 1.0.3 [ 10.290730] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com [ 10.303601] hda: No disk in drive [ 10.315661] hdb: No disk in drive [ 10.447604] PM: Starting manual resume from disk [ 10.475138] kjournald starting. Commit interval 5 seconds [ 10.475138] EXT3-fs: mounted filesystem with ordered data mode. [ 11.683110] udevd version 125 started [ 12.233076] input: Power Button (FF) as /class/input/input4 [ 12.291446] ACPI: Power Button (FF) [PWRF] [ 12.291515] input: Power Button (CM) as /class/input/input5 [ 12.360070] ACPI: Power Button (CM) [PWRB] [ 12.488651] Bluetooth: Core ver 2.11 [ 12.504653] NET: Registered protocol family 31 [ 12.504653] Bluetooth: HCI device and connection manager initialized [ 12.504653] Bluetooth: HCI socket layer initialized [ 12.520836] Bluetooth: HCI USB driver ver 2.9 [ 12.520836] usbcore: registered new interface driver hci_usb [ 12.520836] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003) [ 12.520836] ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 18 [ 12.576835] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) [ 12.576835] iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0860) [ 12.576835] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 12.586320] input: PC Speaker as /class/input/input6 [ 12.656887] ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded [ 12.725594] pnp: the driver 'parport_pc' has been registered [ 12.725594] parport_pc 00:0b: reported by Plug and Play ACPI [ 12.725594] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP] [ 12.740129] HiSax: Linux Driver for passive ISDN cards [ 12.740129] HiSax: Version 3.5 (module) [ 12.740129] HiSax: Layer1 Revision 2.46.2.5 [ 12.740129] HiSax: Layer2 Revision 2.30.2.4 [ 12.740129] HiSax: TeiMgr Revision 2.20.2.3 [ 12.740129] HiSax: Layer3 Revision 2.22.2.3 [ 12.740129] HiSax: LinkLayer Revision 2.59.2.4 [ 12.772128] hisax_isac: ISAC-S/ISAC-SX ISDN driver v0.1.0 [ 12.822139] parport_pc 00:0b: driver attached [ 12.835092] hisax_fcpcipnp: Fritz!Card PCI/PCIv2/PnP ISDN driver v0.0.1 [ 12.835092] HiSax: Card 1 Protocol EDSS1 Id=fcpcipnp0 (0) [ 12.835092] HiSax: DSS1 Rev. 2.32.2.3 [ 12.835092] HiSax: 2 channels added [ 12.835092] HiSax: MAX_WAITING_CALLS added [ 12.835092] ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 12.835092] hisax_fcpcipnp: found adapter Fritz!Card PCI v2 at 0000:05:02.0 [ 12.867092] pnp: the driver 'fcpnp' has been registered [ 13.059988] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 13.060006] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 14.376790] Adding 9767416k swap on /dev/md2. Priority:-1 extents:1 across:9767416k [ 14.896661] EXT3 FS on dm-0, internal journal [ 15.429352] loop: module loaded [ 15.985703] hda: No disk in drive [ 16.158397] hdb: No disk in drive [ 17.842752] kjournald starting. Commit interval 5 seconds [ 17.886202] EXT3 FS on dm-1, internal journal [ 17.886202] EXT3-fs: mounted filesystem with ordered data mode. [ 18.030048] kjournald starting. Commit interval 5 seconds [ 18.048275] EXT3 FS on dm-3, internal journal [ 18.048278] EXT3-fs: mounted filesystem with ordered data mode. [ 18.154804] kjournald starting. Commit interval 5 seconds [ 18.170057] EXT3 FS on dm-2, internal journal [ 18.170057] EXT3-fs: mounted filesystem with ordered data mode. [ 18.582518] atl1 0000:03:00.0: eth0 link is up 100 Mbps full duplex [ 19.186417] NET: Registered protocol family 10 [ 19.186417] lo: Disabled Privacy Extensions [ 30.084341] lp0: using parport0 (interrupt-driven). [ 30.096341] ppdev: user-space parallel port driver [ 30.252065] eth0: no IPv6 routers present [ 34.785277] Bluetooth: L2CAP ver 2.9 [ 34.785277] Bluetooth: L2CAP socket layer initialized [ 34.834395] Bluetooth: RFCOMM socket layer initialized [ 34.834395] Bluetooth: RFCOMM TTY layer initialized [ 34.834395] Bluetooth: RFCOMM ver 1.8 [ 37.339020] nvidia: module license 'NVIDIA' taints kernel. [ 37.594930] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 37.594938] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 37.595050] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 173.14.09 Wed Jun 4 23:40:50 PDT 2008 [ 5131.307415] md: md13 stopped. [ 5131.315441] md: bind<sdc3> [ 5131.365295] raid1: raid set md13 active with 1 out of 2 mirrors [ 5131.394625] EXT2-fs warning (device md13): ext2_fill_super: mounting ext3 filesystem as ext2 [ 5131.394631] EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended [10009.189853] isdn_net: call from 618268539 -> 0 9507730 ignored [10009.189853] isdn_tty: call from 618268539 -> 9507730 ignored [19230.722185] usb 1-2: USB disconnect, address 2 [19234.254337] usb 1-2: new full speed USB device using uhci_hcd and address 3 [19234.518238] usb 1-2: configuration #1 chosen from 1 choice [19234.530714] usb 1-2: New USB device found, idVendor=04e6, idProduct=e003 [19234.530719] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=5 [19234.530722] usb 1-2: Product: SPRx32 USB Smart Card Reader [19234.530724] usb 1-2: Manufacturer: SCM Microsystems Inc. [19234.530726] usb 1-2: SerialNumber: 60201714 ** Loaded modules: Module Size Used by binfmt_misc 13580 1 nvidia 8105072 24 rfcomm 38176 6 l2cap 23936 9 rfcomm ppdev 11656 0 lp 14724 0 acpi_cpufreq 11792 1 cpufreq_userspace 8452 0 cpufreq_conservative 11784 0 cpufreq_ondemand 11792 1 cpufreq_stats 9120 0 freq_table 9344 3 acpi_cpufreq,cpufreq_ondemand,cpufreq_stats cpufreq_powersave 6400 0 ipv6 288328 26 ext2 66576 2 sbp2 25356 0 loop 19468 0 snd_hda_intel 434904 0 snd_pcm_oss 41760 0 snd_mixer_oss 18816 1 snd_pcm_oss snd_pcm 81672 2 snd_hda_intel,snd_pcm_oss snd_seq_dummy 7428 0 snd_seq_oss 33152 0 snd_seq_midi 11072 0 hisax_fcpcipnp 14080 0 hisax_isac 11936 1 hisax_fcpcipnp snd_rawmidi 26784 1 snd_seq_midi hisax 380036 2 hisax_fcpcipnp,hisax_isac parport_pc 31016 1 snd_seq_midi_event 11904 2 snd_seq_oss,snd_seq_midi crc_ccitt 6528 1 hisax parport 41776 3 ppdev,lp,parport_pc snd_seq 54304 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event isdn 127712 1 hisax psmouse 42268 0 slhc 10112 1 isdn serio_raw 9860 0 pcspkr 7040 0 iTCO_wdt 15696 0 snd_timer 25744 2 snd_pcm,snd_seq snd_seq_device 11668 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq i2c_i801 13596 0 hci_usb 18460 2 i2c_core 27936 2 nvidia,i2c_i801 bluetooth 57124 7 rfcomm,l2cap,hci_usb snd 63688 9 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 12064 1 snd snd_page_alloc 13072 2 snd_hda_intel,snd_pcm button 11680 0 intel_agp 31728 0 joydev 14848 0 evdev 14208 4 ext3 125072 4 jbd 51240 1 ext3 mbcache 12804 2 ext2,ext3 dm_mirror 20608 0 dm_log 13956 1 dm_mirror dm_snapshot 19400 0 dm_mod 58864 13 dm_mirror,dm_log,dm_snapshot raid1 24192 4 md_mod 80164 5 raid1 sg 36448 0 ide_floppy 18560 0 sr_mod 19652 0 cdrom 37928 1 sr_mod sd_mod 29376 10 ide_pci_generic 9220 0 [permanent] usbhid 45792 0 hid 41792 1 usbhid ff_memless 9224 1 usbhid jmicron 6912 0 [permanent] ide_core 128284 3 ide_floppy,ide_pci_generic,jmicron ata_piix 22660 7 floppy 61672 0 ata_generic 10116 0 ahci 33036 0 ohci1394 32564 0 libata 165472 3 ata_piix,ata_generic,ahci ieee1394 93816 2 sbp2,ohci1394 scsi_mod 160760 5 sbp2,sg,sr_mod,sd_mod,libata dock 14112 1 libata atl1 35464 0 mii 9856 1 atl1 ehci_hcd 36108 0 uhci_hcd 25760 0 thermal 22688 0 processor 42304 2 acpi_cpufreq,thermal fan 9352 0 thermal_sys 17728 3 thermal,processor,fan ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 82P965/G965 Memory Controller Hub [8086:29a0] (rev 02) Subsystem: ASUSTeK Computer Inc. P5B [1043:81ea] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel modules: intel-agp 00:01.0 PCI bridge [0604]: Intel Corporation 82P965/G965 PCI Express Root Port [8086:29a1] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: fa700000-fe7fffff Prefetchable memory behind bridge: 00000000bfe00000-00000000dfdfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at dc00 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at e000 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 02) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: Memory at febffc00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 02) Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 22 Region 0: Memory at febf8000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 02) (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 Prefetchable memory behind bridge: 00000000dfe00000-00000000dfefffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.3 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 [8086:2845] (rev 02) (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: fe900000-fe9fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 [8086:2847] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: fe800000-fe8fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at d480 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at d800 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at d880 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 02) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at febff800 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev f2) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=32 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fea00000-feafffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801HB/HR (ICH8/R) LPC Interface Controller [8086:2810] (rev 02) Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel modules: iTCO_wdt 00:1f.2 IDE interface [0101]: Intel Corporation 82801H (ICH8 Family) 4 port SATA IDE Controller [8086:2820] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: ASUSTeK Computer Inc. Device [1043:81ec] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at ec00 [size=8] Region 1: I/O ports at e880 [size=4] Region 2: I/O ports at e800 [size=8] Region 3: I/O ports at e480 [size=4] Region 4: I/O ports at e400 [size=16] Region 5: I/O ports at e080 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix Kernel modules: ata_generic, ata_piix, ide-pci-generic 00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 02) Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at 88000000 (32-bit, non-prefetchable) [size=256] Region 4: I/O ports at 0400 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c-i801 00:1f.5 IDE interface [0101]: Intel Corporation 82801H (ICH8 Family) 2 port SATA IDE Controller [8086:2825] (rev 02) (prog-if 85 [Master SecO PriO]) Subsystem: ASUSTeK Computer Inc. Device [1043:81ec] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at d400 [size=8] Region 1: I/O ports at d080 [size=4] Region 2: I/O ports at d000 [size=8] Region 3: I/O ports at cc00 [size=4] Region 4: I/O ports at c880 [size=16] Region 5: I/O ports at c800 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix Kernel modules: ata_generic, ata_piix, ide-pci-generic 01:00.0 VGA compatible controller [0300]: nVidia Corporation G72 [GeForce 7300 SE] [10de:01d3] (rev a1) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device [1043:8247] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at fc000000 (64-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at fe7e0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: nvidia Kernel modules: nvidia, nvidiafb 02:00.0 SATA controller [0106]: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller [197b:2363] (rev 03) (prog-if 01 [AHCI 1.0]) Subsystem: ASUSTeK Computer Inc. Device [1043:81e4] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 5: Memory at fe8fe000 (32-bit, non-prefetchable) [size=8K] Expansion ROM at fe8e0000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: ahci Kernel modules: ahci 02:00.1 IDE interface [0101]: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller [197b:2363] (rev 03) (prog-if 85 [Master SecO PriO]) Subsystem: ASUSTeK Computer Inc. Device [1043:81e4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at ac00 [size=8] Region 1: I/O ports at a880 [size=4] Region 2: I/O ports at a800 [size=8] Region 3: I/O ports at a480 [size=4] Region 4: I/O ports at a400 [size=16] Capabilities: <access denied> Kernel driver in use: JMicron IDE Kernel modules: ata_generic, jmicron, ide-pci-generic 03:00.0 Ethernet controller [0200]: Attansic Technology Corp. L1 Gigabit Ethernet Adapter [1969:1048] (rev b0) Subsystem: ASUSTeK Computer Inc. Device [1043:8226] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 1275 Region 0: Memory at fe9c0000 (64-bit, non-prefetchable) [size=256K] Expansion ROM at fe9a0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: atl1 Kernel modules: atl1 05:02.0 Network controller [0280]: AVM Audiovisuelles MKTG & Computer System GmbH Fritz!PCI v2.0 ISDN [1244:0e00] (rev 01) Subsystem: AVM Audiovisuelles MKTG & Computer System GmbH Fritz!PCI v2.0 ISDN [1244:0e00] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 23 Region 0: Memory at feaffc00 (32-bit, non-prefetchable) [size=32] Region 1: I/O ports at bc00 [size=32] Capabilities: <access denied> Kernel driver in use: fcpci Kernel modules: hisax_fcpcipnp 05:03.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306 Fire II IEEE 1394 OHCI Link Layer Controller [1106:3044] (rev 80) (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. A8V/A8N/P4P800 series motherboard [1043:808a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (8000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 21 Region 0: Memory at feaff000 (32-bit, non-prefetchable) [size=2K] Region 1: I/O ports at b880 [size=128] Capabilities: <access denied> Kernel driver in use: ohci1394 Kernel modules: ohci1394 -- System Information: Debian Release: 5.0 APT prefers stable APT policy: (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26-1-amd64 (SMP w/2 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.26-1-amd64 depends on: ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs ii module-init-tools 3.4-1 tools for managing Linux kernel mo linux-image-2.6.26-1-amd64 recommends no packages. Versions of packages linux-image-2.6.26-1-amd64 suggests: ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v pn linux-doc-2.6.26 <none> (no description available) -- debconf information: linux-image-2.6.26-1-amd64/postinst/create-kimage-link-2.6.26-1-amd64: true shared/kernel-image/really-run-bootloader: true linux-image-2.6.26-1-amd64/postinst/kimage-is-a-directory: linux-image-2.6.26-1-amd64/postinst/old-initrd-link-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/preinst/bootloader-initrd-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/preinst/initrd-2.6.26-1-amd64: linux-image-2.6.26-1-amd64/postinst/old-system-map-link-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/postinst/depmod-error-initrd-2.6.26-1-amd64: false linux-image-2.6.26-1-amd64/preinst/overwriting-modules-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/preinst/elilo-initrd-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/postinst/bootloader-error-2.6.26-1-amd64: linux-image-2.6.26-1-amd64/preinst/abort-install-2.6.26-1-amd64: linux-image-2.6.26-1-amd64/preinst/lilo-initrd-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/postinst/depmod-error-2.6.26-1-amd64: false linux-image-2.6.26-1-amd64/prerm/removing-running-kernel-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/prerm/would-invalidate-boot-loader-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/postinst/bootloader-test-error-2.6.26-1-amd64: linux-image-2.6.26-1-amd64/preinst/abort-overwrite-2.6.26-1-amd64: linux-image-2.6.26-1-amd64/postinst/old-dir-initrd-link-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/preinst/lilo-has-ramdisk: linux-image-2.6.26-1-amd64/preinst/failed-to-move-modules-2.6.26-1-amd64: --------------------------------- [33414.290580] Call Trace: Feb 15 11:26:48 camelot kernel: [33414.290580] [<ffffffffa019b3be>] :jbd:journal_dirty_data+0x31/0x184 Feb 15 11:26:48 camelot kernel: [33414.290580] [<ffffffffa01abfbc>] :ext3:ext3_journal_dirty_data+0xf/0x34 Feb 15 11:26:48 camelot kernel: [33414.290580] [<ffffffffa01ab45a>] :ext3:walk_page_buffers+0x64/0x8a Feb 15 11:26:48 camelot kernel: [33414.290580] [<ffffffffa01abfe1>] :ext3:journal_dirty_data_fn+0x0/0xd Feb 15 11:26:48 camelot kernel: [33414.290580] [<ffffffffa01ae159>] :ext3:ext3_ordered_writepage+0xeb/0x16f Feb 15 11:26:48 camelot kernel: [33414.290580] [<ffffffff8027709b>] __writepage+0xa/0x23 Feb 15 11:26:48 camelot kernel: [33414.290580] [<ffffffff80277560>] write_cache_pages+0x182/0x2b1 Feb 15 11:26:48 camelot kernel: [33414.290580] [<ffffffff80277091>] __writepage+0x0/0x23 Feb 15 11:26:48 camelot kernel: [33414.290580] [<ffffffff80277091>] __writepage+0x0/0x23 Feb 15 11:26:48 camelot kernel: [33414.290580] [<ffffffff802776d2>] do_writepages+0x27/0x2d Feb 15 11:26:48 camelot kernel: [33414.290580] [<ffffffff802b64d4>] __writeback_single_inode+0x144/0x29d Feb 15 11:26:48 camelot kernel: [33414.290580] [<ffffffff80278d56>] pagevec_lookup_tag+0x1a/0x21 Feb 15 11:26:48 camelot kernel: [33414.290580] [<ffffffff80271806>] wait_on_page_writeback_range+0xc8/0x113 Feb 15 11:26:48 camelot kernel: [33414.290580] [<ffffffff802b6998>] sync_sb_inodes+0x1b1/0x293 Feb 15 11:26:48 camelot kernel: [33414.290580] [<ffffffff802b6b14>] sync_inodes_sb+0x9a/0xa6 Feb 15 11:26:48 camelot kernel: [33414.290580] [<ffffffff802b6b79>] __sync_inodes+0x59/0xa2 Feb 15 11:26:48 camelot kernel: [33414.290580] [<ffffffff802b6bd3>] sync_inodes+0x11/0x29 Feb 15 11:26:48 camelot kernel: [33414.290580] [<ffffffff802b9426>] do_sync+0x12/0x5a Feb 15 11:26:48 camelot kernel: [33414.290580] [<ffffffff802b947c>] sys_sync+0xe/0x16 Feb 15 11:26:48 camelot kernel: [33414.290580] [<ffffffff8020beca>] system_call_after_swapgs+0x8a/0x8f
--- End Message ---
--- Begin Message ---
- To: 515514-done@bugs.debian.org
- Subject: Re: linux-image-2.6.26-1-amd64: combination of kernel amd64 and 6G memory by using a lvm in a software raid creates a kernel panic
- From: Ben Hutchings <ben@decadent.org.uk>
- Date: Tue, 06 Apr 2010 04:23:30 +0100
- Message-id: <1270524210.24287.112.camel@localhost>
Closing due to lack of response. Ben. -- Ben Hutchings Once a job is fouled up, anything done to improve it makes it worse.Attachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---