[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#551624: marked as done (linux-image-2.6.30: btusb: 0a5c:2101 Broadcom USB in 'lsusb', but not in 'hcitool dev', regression from 2.6.30-6)

Your message dated Tue, 06 Apr 2010 04:37:03 +0100
with message-id <1270525023.24287.125.camel@localhost>
and subject line Re: linux-image-2.6.30: btusb: 0a5c:2101 Broadcom USB in 'lsusb', but not in 'hcitool dev', regression from 2.6.30-6
has caused the Debian Bug report #551624,
regarding linux-image-2.6.30: btusb: 0a5c:2101 Broadcom USB in 'lsusb', but not in 'hcitool dev', regression from 2.6.30-6
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
551624: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=551624
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: linux-image-2.6.30-2-686
Version: 2.6.30-8
Severity: important
File: linux-image-2.6.30


"0a5c:2101 Broadcom Corp. A-Link BlueUsbA2 Bluetooth" unusable, but works in linux-image-2.6.30-1-686=2.6.30-6.

It is not listed in 'hcitool dev' and not available from 'hciconfig' etc, but listed in lsusb.


-- Package-specific info:
** Version:
Linux version 2.6.30-2-686 (Debian 2.6.30-8) (waldi@debian.org) (gcc version 4.3.4 (Debian 4.3.4-3) ) #1 SMP Sat Sep 26 01:16:22 UTC 2009

** Command line:
BOOT_IMAGE=/vmlinuz-2.6.30-2-686 root=/dev/mapper/wind-root ro console=tty7 quiet

** Not tainted

** Kernel log:
[    6.657228] 	(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    6.657238] 	(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    6.657247] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[    6.778023] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    6.778081] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    6.864107] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[    6.864350] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[    7.072509] cfg80211: Calling CRDA for country: US
[    7.359737] b43-phy0: Broadcom 4311 WLAN found (core revision 10)
[    7.463003] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input11
[    7.486988] phy0: Selected rate control algorithm 'minstrel'
[    7.489013] Broadcom 43xx driver loaded [ Features: PMLR, Firmware-ID: FW13 ]
[    7.781485] usb-storage: device scan complete
[    7.783465] scsi 4:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
[    7.787881] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    9.181581] Adding 2097144k swap on /dev/mapper/wind-swap_1.  Priority:-1 extents:1 across:2097144k 
[    9.593021] EXT3 FS on dm-0, internal journal
[   11.258225] kjournald starting.  Commit interval 5 seconds
[   11.258556] EXT3 FS on sda1, internal journal
[   11.258573] EXT3-fs: mounted filesystem with ordered data mode.
[   11.292800] kjournald starting.  Commit interval 5 seconds
[   11.293211] EXT3 FS on dm-4, internal journal
[   11.293228] EXT3-fs: mounted filesystem with ordered data mode.
[   14.161661] r8169: eth0: link up
[   14.161682] r8169: eth0: link up
[   14.448310] r8169: eth0: link up
[   15.396139] Clocksource tsc unstable (delta = -71291356 ns)
[   25.212127] eth0: no IPv6 routers present
[   27.860816] usb 1-1.3: new high speed USB device using ehci_hcd and address 7
[   27.969261] usb 1-1.3: New USB device found, idVendor=05ac, idProduct=1301
[   27.969278] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   27.969290] usb 1-1.3: Product: iPod
[   27.969299] usb 1-1.3: Manufacturer: Apple
[   27.969308] usb 1-1.3: SerialNumber: 000A270011EC00A4
[   27.969628] usb 1-1.3: configuration #1 chosen from 2 choices
[   27.971304] scsi5 : SCSI emulation for USB Mass Storage devices
[   27.972578] usb-storage: device found at 7
[   27.972591] usb-storage: waiting for device to settle before scanning
[   32.972429] usb-storage: device scan complete
[   32.973111] scsi 5:0:0:0: Direct-Access     Apple    iPod             2.70 PQ: 0 ANSI: 2
[   32.976185] sd 5:0:0:0: [sdc] 495616 2048-byte hardware sectors: (1.01 GB/968 MiB)
[   32.976790] sd 5:0:0:0: [sdc] Write Protect is off
[   32.976812] sd 5:0:0:0: [sdc] Mode Sense: 64 00 00 08
[   32.976826] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[   32.979832] sd 5:0:0:0: [sdc] 495616 2048-byte hardware sectors: (1.01 GB/968 MiB)
[   32.980427] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[   32.981617]  sdc:
[   32.991162] sd 5:0:0:0: [sdc] Attached SCSI removable disk
[   36.368578] Bluetooth: Core ver 2.15
[   36.368788] NET: Registered protocol family 31
[   36.368801] Bluetooth: HCI device and connection manager initialized
[   36.368815] Bluetooth: HCI socket layer initialized
[   36.391438] Bluetooth: L2CAP ver 2.13
[   36.391451] Bluetooth: L2CAP socket layer initialized
[   36.427069] Bluetooth: RFCOMM socket layer initialized
[   36.427100] Bluetooth: RFCOMM TTY layer initialized
[   36.427113] Bluetooth: RFCOMM ver 1.11
[   36.552440] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   36.552452] Bluetooth: BNEP filters: protocol multicast
[   36.777362] Bridge firewalling registered
[   36.876948] Bluetooth: SCO (Voice Link) ver 0.6
[   36.876963] Bluetooth: SCO socket layer initialized
[   39.475544] lp: driver loaded but no devices found
[   39.511675] ppdev: user-space parallel port driver
[  123.654578] [drm] Initialized drm 1.1.0 20060810
[  123.721947] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[  123.721971] pci 0000:00:02.0: setting latency timer to 64
[  123.728328] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0

** Loaded modules:
Module                  Size  Used by
i915                  149164  1 
drm                   137920  2 i915
i2c_algo_bit            4860  1 i915
i2c_core               20844  3 i915,drm,i2c_algo_bit
ppdev                   6348  0 
lp                      8012  0 
parport                31144  2 ppdev,lp
sco                     8816  2 
bridge                 39968  0 
stp                     2112  1 bridge
bnep                   10860  2 
rfcomm                 30340  1 
l2cap                  18088  6 bnep,rfcomm
bluetooth              47028  6 sco,bnep,rfcomm,l2cap
vfat                    8628  0 
fat                    41452  1 vfat
nls_base                6416  2 vfat,fat
ext2                   54120  2 
acpi_cpufreq            7640  0 
arc4                    1560  2 
ecb                     2368  2 
b43                   108932  0 
rfkill                  9668  1 b43
mac80211              142984  1 b43
snd_hda_codec_realtek   178564  1 
snd_hda_intel          22192  0 
snd_hda_codec          63580  2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep               6120  1 snd_hda_codec
snd_pcm_oss            32228  0 
snd_mixer_oss          12368  1 snd_pcm_oss
snd_pcm                62396  3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_midi            5688  0 
snd_rawmidi            18596  1 snd_seq_midi
snd_seq_midi_event      6212  1 snd_seq_midi
snd_seq                42436  2 snd_seq_midi,snd_seq_midi_event
snd_timer              17436  2 snd_pcm,snd_seq
snd_seq_device          6136  3 snd_seq_midi,snd_rawmidi,snd_seq
cfg80211               55572  2 b43,mac80211
snd                    49060  11 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore               6184  1 snd
psmouse                37528  0 
led_class               3852  1 b43
pcspkr                  2104  0 
serio_raw               4560  0 
rng_core                3672  1 b43
input_polldev           3588  1 b43
wmi                     6172  0 
evdev                   8028  24 
snd_page_alloc          8180  2 snd_hda_intel,snd_pcm
ac                      2960  0 
battery                 6012  0 
processor              34560  3 acpi_cpufreq
button                  5060  0 
ext3                  107172  3 
jbd                    41036  1 ext3
mbcache                 6924  2 ext2,ext3
dm_mod                 49992  16 
usbhid                 31568  0 
hid                    34528  1 usbhid
sd_mod                 28740  3 
crc_t10dif              1632  1 sd_mod
usb_storage            48564  0 
ahci                   30068  2 
libata                151044  1 ahci
ssb                    37692  1 b43
uhci_hcd               19136  0 
ehci_hcd               29812  0 
pcmcia                 24280  2 b43,ssb
r8169                  27692  0 
mii                     4664  1 r8169
pcmcia_core            31212  3 b43,ssb,pcmcia
intel_agp              23052  1 
scsi_mod              131800  3 sd_mod,usb_storage,libata
agpgart                30836  3 drm,intel_agp
usbcore               126052  5 usbhid,usb_storage,uhci_hcd,ehci_hcd
video                  18044  1 i915
output                  2604  1 video
thermal                12580  0 
fan                     4044  0 
thermal_sys            13140  4 processor,video,thermal,fan

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GME Express Memory Controller Hub [8086:27ac] (rev 03)
	Subsystem: Micro-Star International Co., Ltd. Device [1462:0110]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GME Express Integrated Graphics Controller [8086:27ae] (rev 03) (prog-if 00 [VGA controller])
	Subsystem: Micro-Star International Co., Ltd. Device [1462:0110]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at dfe80000 (32-bit, non-prefetchable) [size=512K]
	Region 1: I/O ports at e100 [size=8]
	Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M]
	Region 3: Memory at dff00000 (32-bit, non-prefetchable) [size=256K]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: <access denied>

00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
	Subsystem: Micro-Star International Co., Ltd. Device [1462:0110]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Region 0: Memory at dfe00000 (32-bit, non-prefetchable) [size=512K]
	Capabilities: <access denied>

00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 02)
	Subsystem: Micro-Star International Co., Ltd. Device [1462:0110]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at ffe00000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: HDA Intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: dfd00000-dfdfffff
	Prefetchable memory behind bridge: 00000000ffd00000-00000000ffdfffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver

00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	Memory behind bridge: dfc00000-dfcfffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver

00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Micro-Star International Co., Ltd. Device [1462:0110]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 4: I/O ports at e0a0 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Micro-Star International Co., Ltd. Device [1462:0110]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 4: I/O ports at e080 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Micro-Star International Co., Ltd. Device [1462:0110]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 4: I/O ports at e060 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Micro-Star International Co., Ltd. Device [1462:0110]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin D routed to IRQ 16
	Region 4: I/O ports at e040 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
	Subsystem: Micro-Star International Co., Ltd. Device [1462:0110]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at dff40400 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02)
	Subsystem: Micro-Star International Co., Ltd. Device [1462:0110]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:1f.2 SATA controller [0106]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller [8086:27c5] (rev 02) (prog-if 01 [AHCI 1.0])
	Subsystem: Micro-Star International Co., Ltd. Device [1462:0110]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 27
	Region 0: I/O ports at e0f0 [size=8]
	Region 1: I/O ports at e0e0 [size=4]
	Region 2: I/O ports at e0d0 [size=8]
	Region 3: I/O ports at e0c0 [size=4]
	Region 4: I/O ports at e020 [size=16]
	Region 5: Memory at dff40000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ahci

01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02)
	Subsystem: Micro-Star International Co., Ltd. Device [1462:0110]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 26
	Region 0: I/O ports at d000 [size=256]
	Region 2: Memory at ffd10000 (64-bit, prefetchable) [size=4K]
	Region 4: Memory at ffd00000 (64-bit, prefetchable) [size=64K]
	Expansion ROM at dfd00000 [disabled] [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: r8169

02:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11a/b/g [14e4:4312] (rev 01)
	Subsystem: Hewlett-Packard Company Broadcom 802.11a/b/g WLAN [103c:1361]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at dfc00000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: b43-pci-bridge



-- System Information:
Debian Release: squeeze/sid
  APT prefers testing
  APT policy: (990, 'testing'), (500, 'testing-proposed-updates'), (500, 'unstable')
Architecture: i386 (i686)

Kernel: Linux 2.6.30-2-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.30-2-686 depends on:
ii  debconf [debconf-2.0]         1.5.27     Debian configuration management sy
ii  initramfs-tools [linux-initra 0.93.4     tools for generating an initramfs
ii  module-init-tools             3.10-3     tools for managing Linux kernel mo

Versions of packages linux-image-2.6.30-2-686 recommends:
ii  libc6-i686                    2.9-25     GNU C Library: Shared libraries [i

Versions of packages linux-image-2.6.30-2-686 suggests:
pn  grub | lilo                   <none>     (no description available)
pn  linux-doc-2.6.30              <none>     (no description available)

-- debconf information:
  linux-image-2.6.30-2-686/postinst/bootloader-test-error-2.6.30-2-686:
  shared/kernel-image/really-run-bootloader: true
  linux-image-2.6.30-2-686/preinst/failed-to-move-modules-2.6.30-2-686:
  linux-image-2.6.30-2-686/preinst/lilo-initrd-2.6.30-2-686: true
  linux-image-2.6.30-2-686/postinst/old-dir-initrd-link-2.6.30-2-686: true
  linux-image-2.6.30-2-686/preinst/initrd-2.6.30-2-686:
  linux-image-2.6.30-2-686/preinst/elilo-initrd-2.6.30-2-686: true
  linux-image-2.6.30-2-686/postinst/depmod-error-2.6.30-2-686: false
  linux-image-2.6.30-2-686/postinst/old-initrd-link-2.6.30-2-686: true
  linux-image-2.6.30-2-686/preinst/abort-install-2.6.30-2-686:
  linux-image-2.6.30-2-686/postinst/kimage-is-a-directory:
  linux-image-2.6.30-2-686/preinst/bootloader-initrd-2.6.30-2-686: true
  linux-image-2.6.30-2-686/postinst/bootloader-error-2.6.30-2-686:
  linux-image-2.6.30-2-686/prerm/removing-running-kernel-2.6.30-2-686: true
  linux-image-2.6.30-2-686/preinst/overwriting-modules-2.6.30-2-686: true
  linux-image-2.6.30-2-686/preinst/abort-overwrite-2.6.30-2-686:
  linux-image-2.6.30-2-686/postinst/depmod-error-initrd-2.6.30-2-686: false
  linux-image-2.6.30-2-686/postinst/create-kimage-link-2.6.30-2-686: true
  linux-image-2.6.30-2-686/prerm/would-invalidate-boot-loader-2.6.30-2-686: true
  linux-image-2.6.30-2-686/preinst/lilo-has-ramdisk:
  linux-image-2.6.30-2-686/postinst/old-system-map-link-2.6.30-2-686: true

--- End Message ---
--- Begin Message --- 
Closed due to lack of response.

Ben.

-- 
Ben Hutchings
Once a job is fouled up, anything done to improve it makes it worse.

Attachment: signature.asc
Description: This is a digitally signed message part


--- End Message ---
Reply to: