Your message dated Sun, 4 Apr 2010 15:09:15 +0200 with message-id <20100404130915.GF32211@baikonur.stro.at> and subject line Re: Bug#576400: linux-image-2.6.32-3-amd64: CPU beep does not go away on removing pcspkr has caused the Debian Bug report #576400, regarding linux-image-2.6.32-3-amd64: CPU beep does not go away on removing pcspkr to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 576400: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=576400 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.32-3-amd64: CPU beep does not go away on removing pcspkr
- From: Abhishek Dasgupta <abhidg@gmail.com>
- Date: Sun, 4 Apr 2010 13:31:01 +0530
- Message-id: <20100404080101.GA4835@abhidg.net>
- Reply-to: esults@abhidg.net
Package: linux-2.6 Version: 2.6.32-9 Severity: normal I was not sure which package to file this bug against. I have rmmod'ed pcspkr and snd_pcsp. I have also put these in /etc/modprobe.d/blacklist.conf. GDM beeps on boot, as does one of the user accounts (on error in the terminal and when typing passwords). Another user account uses the system beep sound as specified in Sound preferences. I have pulseaudio installed. -- Package-specific info: ** Version: Linux version 2.6.32-3-amd64 (Debian 2.6.32-9) (maks@debian.org) (gcc version 4.3.4 (Debian 4.3.4-8) ) #1 SMP Wed Feb 24 18:07:42 UTC 2010 ** Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-3-amd64 root=UUID=2217a02f-e7ff-411d-b5a7-e63e39bb856e ro quiet vga=791 ** Not tainted ** Kernel log: [ 1.310917] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.310920] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.310930] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 1.310953] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002040 [ 1.310987] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.310990] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.310993] usb usb6: Product: UHCI Host Controller [ 1.310995] usb usb6: Manufacturer: Linux 2.6.32-3-amd64 uhci_hcd [ 1.310997] usb usb6: SerialNumber: 0000:00:1d.1 [ 1.311065] usb usb6: configuration #1 chosen from 1 choice [ 1.311095] hub 6-0:1.0: USB hub found [ 1.311103] hub 6-0:1.0: 2 ports detected [ 1.311151] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.311157] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.311160] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.311168] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 1.311190] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002020 [ 1.311224] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.311226] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.311229] usb usb7: Product: UHCI Host Controller [ 1.311231] usb usb7: Manufacturer: Linux 2.6.32-3-amd64 uhci_hcd [ 1.311233] usb usb7: SerialNumber: 0000:00:1d.2 [ 1.311293] usb usb7: configuration #1 chosen from 1 choice [ 1.311326] hub 7-0:1.0: USB hub found [ 1.311333] hub 7-0:1.0: 2 ports detected [ 1.620040] usb 6-2: new full speed USB device using uhci_hcd and address 2 [ 1.642642] ata6: SATA link down (SStatus 0 SControl 300) [ 1.653272] ata5: SATA link down (SStatus 0 SControl 300) [ 1.698641] ata4.00: SATA link down (SStatus 0 SControl 300) [ 1.698654] ata4.01: SATA link down (SStatus 4 SControl 300) [ 1.789981] usb 6-2: New USB device found, idVendor=058f, idProduct=9254 [ 1.789985] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.789988] usb 6-2: Product: Generic USB Hub [ 1.789990] usb 6-2: Manufacturer: ALCOR [ 1.790074] usb 6-2: configuration #1 chosen from 1 choice [ 1.793018] hub 6-2:1.0: USB hub found [ 1.794981] hub 6-2:1.0: 4 ports detected [ 1.972078] ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.972090] ata3.01: SATA link down (SStatus 4 SControl 300) [ 2.022701] ata3.00: ATA-7: ST3160211AS, 3.AAE, max UDMA/133 [ 2.022705] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.089358] ata3.00: configured for UDMA/133 [ 2.089468] scsi 2:0:0:0: Direct-Access ATA ST3160211AS 3.AA PQ: 0 ANSI: 5 [ 2.096849] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 2.096898] sd 2:0:0:0: [sda] Write Protect is off [ 2.096901] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.096926] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.097067] sda: sda1 sda2 < sda5 sda6 sda7 > sda3 [ 2.180004] sd 2:0:0:0: [sda] Attached SCSI disk [ 2.194397] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.194401] Uniform CD-ROM driver Revision: 3.20 [ 2.194510] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 2.198029] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 2.198355] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 2.662717] PM: Starting manual resume from disk [ 2.662720] PM: Resume from partition 8:7 [ 2.662722] PM: Checking hibernation image. [ 2.671472] PM: Error -22 checking image file [ 2.671474] PM: Resume from disk failed. [ 2.723980] EXT4-fs (sda6): mounted filesystem with ordered data mode [ 3.923019] udev: starting version 151 [ 4.571003] parport_pc 00:07: reported by Plug and Play ACPI [ 4.571083] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] [ 4.579771] processor LNXCPU:00: registered as cooling_device0 [ 4.579932] processor LNXCPU:01: registered as cooling_device1 [ 4.796991] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 4.951835] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input4 [ 5.171567] alloc irq_desc for 22 on node -1 [ 5.171570] alloc kstat_irqs on node -1 [ 5.171579] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 5.171612] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 5.564170] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5 [ 5.764191] input: HDA Intel Line In at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 5.764296] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 5.764367] input: HDA Intel Mic at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 5.764435] input: HDA Intel Mic at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 5.764505] input: HDA Intel Line In at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 5.764575] input: HDA Intel Line Out at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 5.764645] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 6.150353] Adding 979924k swap on /dev/sda7. Priority:-1 extents:1 across:979924k [ 7.237897] kjournald starting. Commit interval 5 seconds [ 7.238053] EXT3 FS on sda3, internal journal [ 7.238058] EXT3-fs: mounted filesystem with ordered data mode. [ 7.630015] loop: module loaded [ 8.024248] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X [ 8.080103] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X [ 8.080326] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 8.119882] fuse init (API version 7.13) [ 9.577359] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [ 9.577363] 0000:00:19.0: eth0: 10/100 speed: disabling TSO [ 9.577556] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 20.192007] eth0: no IPv6 routers present [ 121.148767] CPU0 attaching NULL sched-domain. [ 121.148773] CPU1 attaching NULL sched-domain. [ 121.176590] CPU0 attaching sched-domain: [ 121.176594] domain 0: span 0-1 level MC [ 121.176597] groups: 0 1 [ 121.176604] CPU1 attaching sched-domain: [ 121.176607] domain 0: span 0-1 level MC [ 121.176610] groups: 1 0 ** Model information sys_vendor: product_name: product_version: chassis_vendor: chassis_version: bios_vendor: Intel Corp. bios_version: MQ96510J.86A.1687.2007.0510.0258 board_vendor: Intel Corporation board_name: DG965RY board_version: AAD41691-301 ** Loaded modules: Module Size Used by acpi_cpufreq 5555 0 cpufreq_stats 2659 0 cpufreq_powersave 902 0 cpufreq_userspace 1992 0 cpufreq_conservative 5162 0 binfmt_misc 6431 1 fuse 50110 1 loop 11783 0 firewire_sbp2 11466 0 ext3 106486 1 jbd 37053 1 ext3 snd_hda_codec_idt 42417 1 snd_hda_intel 19619 2 snd_hda_codec 54212 2 snd_hda_codec_idt,snd_hda_intel snd_hwdep 5364 1 snd_hda_codec snd_pcm_oss 32591 0 snd_mixer_oss 12606 1 snd_pcm_oss snd_pcm 60615 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss snd_timer 15502 1 snd_pcm i2c_i801 7798 0 snd 46350 12 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer soundcore 4598 1 snd snd_page_alloc 6217 2 snd_hda_intel,snd_pcm processor 30215 1 acpi_cpufreq parport_pc 18855 0 parport 27938 1 parport_pc serio_raw 3752 0 evdev 7336 8 psmouse 49505 0 ext4 285099 1 mbcache 4970 2 ext3,ext4 jbd2 66887 1 ext4 crc16 1319 1 ext4 sg 18728 0 sr_mod 12602 0 cdrom 29399 1 sr_mod sd_mod 29689 4 crc_t10dif 1276 1 sd_mod ata_generic 2983 0 uhci_hcd 18505 0 ide_pci_generic 2788 0 i915 248774 2 drm_kms_helper 18899 1 i915 ide_core 76850 1 ide_pci_generic drm 137190 3 i915,drm_kms_helper i2c_algo_bit 4225 1 i915 firewire_ohci 19484 0 pata_marvell 2629 0 intel_agp 25593 1 i2c_core 15584 4 i2c_i801,i915,drm,i2c_algo_bit video 17445 1 i915 firewire_core 36688 2 firewire_sbp2,firewire_ohci crc_itu_t 1307 1 firewire_core ata_piix 19773 3 button 4634 1 i915 libata 132183 3 ata_generic,pata_marvell,ata_piix scsi_mod 121925 5 firewire_sbp2,sg,sr_mod,sd_mod,libata ehci_hcd 30706 0 usbcore 121703 3 uhci_hcd,ehci_hcd output 1692 1 video e1000e 109919 0 nls_base 6377 1 usbcore thermal 11674 0 fan 3346 0 thermal_sys 11878 4 processor,video,thermal,fan ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 82P965/G965 Memory Controller Hub [8086:29a0] (rev 02) Subsystem: Intel Corporation Device [8086:514d] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation 82G965 Integrated Graphics Controller [8086:29a2] (rev 02) (prog-if 00 [VGA controller]) Subsystem: Intel Corporation Device [8086:514d] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 30 Region 0: Memory at 50200000 (32-bit, non-prefetchable) [size=1M] Region 2: Memory at 40000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 2440 [size=8] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:03.0 Communication controller [0780]: Intel Corporation 82P965/G965 HECI Controller [8086:29a4] (rev 02) Subsystem: Intel Corporation Device [8086:514d] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 11 Region 0: Memory at 50325900 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> 00:19.0 Ethernet controller [0200]: Intel Corporation 82566DC Gigabit Network Connection [8086:104b] (rev 02) Subsystem: Intel Corporation Device [8086:0001] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 29 Region 0: Memory at 50300000 (32-bit, non-prefetchable) [size=128K] Region 1: Memory at 50324000 (32-bit, non-prefetchable) [size=4K] Region 2: I/O ports at 20c0 [size=32] Capabilities: <access denied> Kernel driver in use: e1000e 00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 02) (prog-if 00 [UHCI]) Subsystem: Intel Corporation Device [8086:514d] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at 20a0 [size=32] Kernel driver in use: uhci_hcd 00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 02) (prog-if 00 [UHCI]) Subsystem: Intel Corporation Device [8086:514d] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at 2080 [size=32] Kernel driver in use: uhci_hcd 00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 02) (prog-if 20 [EHCI]) Subsystem: Intel Corporation Device [8086:514d] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: Memory at 50325400 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 02) Subsystem: Intel Corporation Device [8086:2113] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 22 Region 0: Memory at 50320000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: 50400000-505fffff Prefetchable memory behind bridge: 0000000050600000-00000000507fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: 50100000-501fffff Prefetchable memory behind bridge: 0000000050800000-00000000509fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.2 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 [8086:2843] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: 50a00000-50bfffff Prefetchable memory behind bridge: 0000000050c00000-0000000050dfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.3 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 [8086:2845] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: 50e00000-50ffffff Prefetchable memory behind bridge: 0000000051000000-00000000511fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 [8086:2847] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 00006000-00006fff Memory behind bridge: 51200000-513fffff Prefetchable memory behind bridge: 0000000051400000-00000000515fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 02) (prog-if 00 [UHCI]) Subsystem: Intel Corporation Device [8086:514d] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at 2060 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 02) (prog-if 00 [UHCI]) Subsystem: Intel Corporation Device [8086:514d] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at 2040 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 02) (prog-if 00 [UHCI]) Subsystem: Intel Corporation Device [8086:514d] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at 2020 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 02) (prog-if 20 [EHCI]) Subsystem: Intel Corporation Device [8086:514d] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at 50325000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev f2) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=06, subordinate=06, sec-latency=32 Memory behind bridge: 50000000-500fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801HB/HR (ICH8/R) LPC Interface Controller [8086:2810] (rev 02) Subsystem: Intel Corporation Device [8086:514d] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 IDE interface [0101]: Intel Corporation 82801H (ICH8 Family) 4 port SATA IDE Controller [8086:2820] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Intel Corporation Device [8086:514d] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at 2438 [size=8] Region 1: I/O ports at 2454 [size=4] Region 2: I/O ports at 2430 [size=8] Region 3: I/O ports at 2450 [size=4] Region 4: I/O ports at 2410 [size=16] Region 5: I/O ports at 2400 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 02) Subsystem: Intel Corporation Device [8086:514d] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 21 Region 0: Memory at 50325800 (32-bit, non-prefetchable) [size=256] Region 4: I/O ports at 2000 [size=32] Kernel driver in use: i801_smbus 00:1f.5 IDE interface [0101]: Intel Corporation 82801H (ICH8 Family) 2 port SATA IDE Controller [8086:2825] (rev 02) (prog-if 85 [Master SecO PriO]) Subsystem: Intel Corporation Device [8086:514d] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at 2428 [size=8] Region 1: I/O ports at 244c [size=4] Region 2: I/O ports at 2420 [size=8] Region 3: I/O ports at 2448 [size=4] Region 4: I/O ports at 20f0 [size=16] Region 5: I/O ports at 20e0 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 02:00.0 IDE interface [0101]: Marvell Technology Group Ltd. 88SE6101 single-port PATA133 interface [11ab:6101] (rev b1) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Marvell Technology Group Ltd. 88SE6101 single-port PATA133 interface [11ab:6101] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: I/O ports at 1018 [size=8] Region 1: I/O ports at 1024 [size=4] Region 2: I/O ports at 1010 [size=8] Region 3: I/O ports at 1020 [size=4] Region 4: I/O ports at 1000 [size=16] Region 5: Memory at 50100000 (32-bit, non-prefetchable) [size=512] Capabilities: <access denied> Kernel driver in use: pata_marvell 06:03.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) [104c:8023] (prog-if 10 [OHCI]) Subsystem: Intel Corporation Device [8086:514d] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at 50004000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at 50000000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: firewire_ohci ** USB devices: Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 002: ID 058f:9254 Alcor Micro Corp. Hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-3-amd64 (SMP w/2 CPU cores) Locale: LANG=en_IN, LC_CTYPE=en_IN (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.32-3-amd64 depends on: ii debconf [debconf-2.0] 1.5.28 Debian configuration management sy ii initramfs-tools [linux-initr 0.93.4 tools for generating an initramfs ii module-init-tools 3.12~pre2-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.32-3-amd64 recommends: pn firmware-linux-free <none> (no description available) Versions of packages linux-image-2.6.32-3-amd64 suggests: pn grub | lilo <none> (no description available) pn linux-doc-2.6.32 <none> (no description available) Versions of packages linux-image-2.6.32-3-amd64 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) pn firmware-linux-nonfree <none> (no description available) pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) -- debconf information: linux-image-2.6.32-3-amd64/postinst/depmod-error-initrd-2.6.32-3-amd64: false shared/kernel-image/really-run-bootloader: true linux-image-2.6.32-3-amd64/prerm/removing-running-kernel-2.6.32-3-amd64: true linux-image-2.6.32-3-amd64/postinst/bootloader-test-error-2.6.32-3-amd64: linux-image-2.6.32-3-amd64/postinst/missing-firmware-2.6.32-3-amd64: linux-image-2.6.32-3-amd64/prerm/would-invalidate-boot-loader-2.6.32-3-amd64: true linux-image-2.6.32-3-amd64/postinst/bootloader-error-2.6.32-3-amd64: -- Abhishek Dasgupta; GPG key 67972D0F (find at keyserver.mit.edu | http://abhidg.googlepages.com/abhidg.asc)Attachment: signature.asc
Description: Digital signature
--- End Message ---
--- Begin Message ---
- To: 576400-done@bugs.debian.org
- Subject: Re: Bug#576400: linux-image-2.6.32-3-amd64: CPU beep does not go away on removing pcspkr
- From: maximilian attems <max@stro.at>
- Date: Sun, 4 Apr 2010 15:09:15 +0200
- Message-id: <20100404130915.GF32211@baikonur.stro.at>
- In-reply-to: <20100404080101.GA4835@abhidg.net>
- References: <20100404080101.GA4835@abhidg.net>
On Sun, Apr 04, 2010 at 01:31:01PM +0530, Abhishek Dasgupta wrote: > Package: linux-2.6 > Version: 2.6.32-9 > Severity: normal > > > I was not sure which package to file this bug against. please ask on a user list for support before filing random bugs. thanks > I have rmmod'ed pcspkr and snd_pcsp. I have also put these in > /etc/modprobe.d/blacklist.conf. GDM beeps on boot, as does one of > the user accounts (on error in the terminal and when typing passwords). > Another user account uses the system beep sound as specified in > Sound preferences. I have pulseaudio installed. no kernel bug, thus closing.
--- End Message ---