Bug#573624: Intel Wireless WiFi Link 1000 Series doesn't load wlan0
Package: linux-image-2.6-686
Version: 3
Severity: normal
On my Acer Aspire 1810TZ, Using linux-image-2.6 wlan0 is not
created. I tried with Debian/Unstable Live, created with LiveHelper
scripts from a memory stick. The system also includes the packages
firmware-linux and firmware-iwlwifi.
The lsmod shows that the iwl modules are loaded.
Using Ubuntu with kernel 2.6.31-20-generic works fine concerning this
driver. Though I prefer to use the Debian/Unstable release on this
system.
As I do not know if I am doing something wrong or it really concerns a
bug, any help or direction is appreciated.
Here the output of dmesg:
================Start dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-3-686 (Debian 2.6.32-9)
(maks@debian.org) (gcc version 4.3.4 (Debian 4.3.4-8) ) #1 SMP Thu Feb
25 06:14:20 UTC 2010
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000
(reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000
(reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ba60000 (usable)
[ 0.000000] BIOS-e820: 000000007ba60000 - 000000007babf000
(reserved)
[ 0.000000] BIOS-e820: 000000007babf000 - 000000007bb80000 (usable)
[ 0.000000] BIOS-e820: 000000007bb80000 - 000000007bbbf000 (ACPI
NVS)
[ 0.000000] BIOS-e820: 000000007bbbf000 - 000000007bbe2000 (usable)
[ 0.000000] BIOS-e820: 000000007bbe2000 - 000000007bbf7000 (ACPI
data)
[ 0.000000] BIOS-e820: 000000007bbf7000 - 000000007bc00000 (usable)
[ 0.000000] BIOS-e820: 000000007bc00000 - 0000000080000000
(reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000
(reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000
(reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000
(reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000
(reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000
(reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000
(reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000
(reserved)
[ 0.000000] DMI 2.6 present.
[ 0.000000] last_pfn = 0x7bc00 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 2 base 040000000 mask FC0000000 write-back
[ 0.000000] 3 base 07C000000 mask FFC000000 uncachable
[ 0.000000] 4 base 07BC00000 mask FFFC00000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037000000 page 2M
[ 0.000000] 0037000000 - 00373fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 7000-d000
[ 0.000000] RAMDISK: 7b0c8000 - 7ba5d9b7
[ 0.000000] Allocated new RAMDISK: 00100000 - 00a959b7
[ 0.000000] Move RAMDISK from 000000007b0c8000 - 000000007ba5d9b6 to
00100000 - 00a959b6
[ 0.000000] ACPI: RSDP 000fe020 00024 (v02 ACRSYS)
[ 0.000000] ACPI: XSDT 7bbf6120 0006C (v01 ACRSYS ACRPRDCT 00000001
01000013)
[ 0.000000] ACPI: FACP 7bbf4000 000F4 (v04 ACRSYS ACRPRDCT 00000001
1025 01000013)
[ 0.000000] ACPI: DSDT 7bbe8000 0700A (v01 ACRSYS ACRPRDCT 00000001
1025 01000013)
[ 0.000000] ACPI: FACS 7bb8d000 00040
[ 0.000000] ACPI: DMAR 7bbf5000 00068 (v01 ? 00000001
00000000)
[ 0.000000] ACPI: HPET 7bbf3000 00038 (v01 ACRSYS ACRPRDCT 00000001
1025 01000013)
[ 0.000000] ACPI: APIC 7bbf2000 0006C (v02 ACRSYS ACRPRDCT 00000001
1025 01000013)
[ 0.000000] ACPI: MCFG 7bbf1000 0003C (v01 ACRSYS ACRPRDCT 00000001
1025 01000013)
[ 0.000000] ACPI: ASF! 7bbf0000 000A5 (v32 ACRSYS ACRPRDCT 00000001
1025 01000013)
[ 0.000000] ACPI: SLIC 7bbe7000 00176 (v01 ACRSYS ACRPRDCT 00000001
1025 01000013)
[ 0.000000] ACPI: BOOT 7bbe6000 00028 (v01 ACRSYS ACRPRDCT 00000001
1025 01000013)
[ 0.000000] ACPI: SSDT 7bbe2000 00655 (v01 PmRef CpuPm 00003000
INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1096MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 0 - 373fe000
[ 0.000000] node 0 low ram: 00000000 - 373fe000
[ 0.000000] node 0 bootmap 00009000 - 0000fe80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 -
00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
[0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==>
[0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==>
[0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014a9314] TEXT DATA BSS ==>
[0001000000 - 00014a9314]
[ 0.000000] #4 [000009e000 - 0000100000] BIOS reserved ==>
[000009e000 - 0000100000]
[ 0.000000] #5 [00014aa000 - 00014b0268] BRK ==>
[00014aa000 - 00014b0268]
[ 0.000000] #6 [0000007000 - 0000009000] PGTABLE ==>
[0000007000 - 0000009000]
[ 0.000000] #7 [0000100000 - 0000a959b7] NEW RAMDISK ==>
[0000100000 - 0000a959b7]
[ 0.000000] #8 [0000009000 - 0000010000] BOOTMAP ==>
[0000009000 - 0000010000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0007bc00
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x0007ba60
[ 0.000000] 0: 0x0007babf -> 0x0007bb80
[ 0.000000] 0: 0x0007bbbf -> 0x0007bbe2
[ 0.000000] 0: 0x0007bbf7 -> 0x0007bc00
[ 0.000000] On node 0 totalpages: 506603
[ 0.000000] free_area_init_node: node 0, pgdat c1396fc0, node_mem_map
c14b2000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3966 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2193 pages used for memmap
[ 0.000000] HighMem zone: 278206 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009e000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 -
0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap:
80000000:78000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2800000 s34072 r0 d23272
u1048576
[ 0.000000] pcpu-alloc: s34072 r0 d23272 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 502642
[ 0.000000] Kernel command line: initrd=/live/initrd.img boot=live
union=aufs BOOT_IMAGE=/live/vmlinuz
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING:
at /build/buildd-linux-2.6_2.6.32-9-i386-0BnCTJ/linux-2.6-2.6.32/debian/build/source_i386_none/drivers/pci/dmar.c:616 check_zero_address+0x80/0x19d()
[ 0.000000] Hardware name: Aspire 1810TZ
[ 0.000000] Your BIOS is broken; DMAR reported at address zero!
[ 0.000000] BIOS vendor: INSYDE; Ver: v0.3117; Product Version:
v0.3117
[ 0.000000] Modules linked in:
[ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.32-3-686 #1
[ 0.000000] Call Trace:
[ 0.000000] [<c1030bfd>] ? warn_slowpath_common+0x5e/0x8a
[ 0.000000] [<c1030c5b>] ? warn_slowpath_fmt+0x26/0x2a
[ 0.000000] [<c13bdef3>] ? check_zero_address+0x80/0x19d
[ 0.000000] [<c117a24e>] ? acpi_get_table_with_size+0x4a/0x9b
[ 0.000000] [<c13be01e>] ? detect_intel_iommu+0xe/0x52
[ 0.000000] [<c13b1c35>] ? mem_init+0xc/0x23d
[ 0.000000] [<c13a167e>] ? start_kernel+0x18a/0x311
[ 0.000000] [<c13a132d>] ? unknown_bootoption+0x0/0x185
[ 0.000000] ---[ end trace a7919e7f17c0a725 ]---
[ 0.000000] Initializing HighMem for node 0 (000373fe:0007bc00)
[ 0.000000] Memory: 1993788k/2027520k available (2429k kernel code,
31560k reserved, 1284k data, 368k init, 1121596k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.000000] .init : 0xc13a1000 - 0xc13fd000 ( 368 kB)
[ 0.000000] .data : 0xc125f44d - 0xc13a0760 (1284 kB)
[ 0.000000] .text : 0xc1000000 - 0xc125f44d (2429 kB)
[ 0.000000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0,
CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 4 timers in total, 0 timers will be used for
per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1296.785 MHz processor.
[ 0.004005] Calibrating delay loop (skipped), value calculated using
timer frequency.. 2593.57 BogoMIPS (lpj=5187140)
[ 0.004149] Security Framework initialized
[ 0.004215] SELinux: Disabled at boot.
[ 0.004281] Mount-cache hash table entries: 512
[ 0.004489] Initializing cgroup subsys ns
[ 0.004554] Initializing cgroup subsys cpuacct
[ 0.004620] Initializing cgroup subsys devices
[ 0.004683] Initializing cgroup subsys freezer
[ 0.004746] Initializing cgroup subsys net_cls
[ 0.004832] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004936] CPU: L2 cache: 2048K
[ 0.004998] CPU: Physical Processor ID: 0
[ 0.005060] CPU: Processor Core ID: 0
[ 0.005125] mce: CPU supports 6 MCE banks
[ 0.008014] CPU0: Thermal monitoring enabled (TM2)
[ 0.008080] using mwait in idle threads.
[ 0.008148] Performance Events: Core2 events, Intel PMU driver.
[ 0.008300] ... version: 2
[ 0.008361] ... bit width: 40
[ 0.008423] ... generic registers: 2
[ 0.008486] ... value mask: 000000ffffffffff
[ 0.008550] ... max period: 000000007fffffff
[ 0.008615] ... fixed-purpose events: 3
[ 0.008677] ... event mask: 0000000700000003
[ 0.009617] Checking 'hlt' instruction... OK.
[ 0.025774] ACPI: Core revision 20090903
[ 0.044418] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.086164] CPU0: Genuine Intel(R) CPU U4100 @ 1.30GHz
stepping 0a
[ 0.088001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 2048K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] CPU1: Thermal monitoring enabled (TM2)
[ 0.172046] CPU1: Genuine Intel(R) CPU U4100 @ 1.30GHz
stepping 0a
[ 0.172562] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.176056] Brought up 2 CPUs
[ 0.176119] Total of 2 processors activated (5187.05 BogoMIPS).
[ 0.176860] CPU0 attaching sched-domain:
[ 0.176864] domain 0: span 0-1 level MC
[ 0.176868] groups: 0 1
[ 0.176876] CPU1 attaching sched-domain:
[ 0.176879] domain 0: span 0-1 level MC
[ 0.176882] groups: 1 0
[ 0.177071] devtmpfs: initialized
[ 0.177641] regulator: core version 0.5
[ 0.177773] NET: Registered protocol family 16
[ 0.177944] ACPI: bus type pci registered
[ 0.178097] PCI: MCFG configuration 0: base f8000000 segment 0 buses
0 - 63
[ 0.178166] PCI: MCFG area at f8000000 reserved in E820
[ 0.178231] PCI: Using MMCONFIG for extended config space
[ 0.178297] PCI: Using configuration type 1 for base access
[ 0.178862] bio: create slab <bio-0> at 0
[ 0.181158] ACPI: EC: Look up EC in DSDT
[ 0.183825] ACPI: Executed 1 blocks of module-level executable AML
code
[ 0.186833] ACPI: BIOS _OSI(Linux) query ignored
[ 0.187458] ACPI: Interpreter enabled
[ 0.187526] ACPI: (supports S0 S3 S4 S5)
[ 0.187788] ACPI: Using IOAPIC for interrupt routing
[ 0.195616] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data =
0x62
[ 0.196043] ACPI: No dock devices found.
[ 0.196833] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.196966] DMAR: Forcing write-buffer flush capability
[ 0.197074] pci 0000:00:02.0: reg 10 64bit mmio:
[0x90000000-0x903fffff]
[ 0.197085] pci 0000:00:02.0: reg 18 64bit mmio pref:
[0x80000000-0x8fffffff]
[ 0.197093] pci 0000:00:02.0: reg 20 io port: [0x30d0-0x30d7]
[ 0.197145] pci 0000:00:02.1: reg 10 64bit mmio:
[0x92400000-0x924fffff]
[ 0.197293] pci 0000:00:1a.0: reg 20 io port: [0x30a0-0x30bf]
[ 0.197409] pci 0000:00:1a.7: reg 10 32bit mmio:
[0x94504c00-0x94504fff]
[ 0.197486] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.197556] pci 0000:00:1a.7: PME# disabled
[ 0.197675] pci 0000:00:1b.0: reg 10 64bit mmio:
[0x94500000-0x94503fff]
[ 0.197737] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.197807] pci 0000:00:1b.0: PME# disabled
[ 0.197964] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.198033] pci 0000:00:1c.0: PME# disabled
[ 0.198193] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.198262] pci 0000:00:1c.3: PME# disabled
[ 0.198420] pci 0000:00:1d.0: reg 20 io port: [0x3080-0x309f]
[ 0.198548] pci 0000:00:1d.1: reg 20 io port: [0x3060-0x307f]
[ 0.198673] pci 0000:00:1d.2: reg 20 io port: [0x3040-0x305f]
[ 0.198784] pci 0000:00:1d.7: reg 10 32bit mmio:
[0x94504800-0x94504bff]
[ 0.198862] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.198932] pci 0000:00:1d.7: PME# disabled
[ 0.199256] pci 0000:00:1f.2: reg 10 io port: [0x30c8-0x30cf]
[ 0.199266] pci 0000:00:1f.2: reg 14 io port: [0x30dc-0x30df]
[ 0.199276] pci 0000:00:1f.2: reg 18 io port: [0x30c0-0x30c7]
[ 0.199285] pci 0000:00:1f.2: reg 1c io port: [0x30d8-0x30db]
[ 0.199295] pci 0000:00:1f.2: reg 20 io port: [0x3020-0x303f]
[ 0.199304] pci 0000:00:1f.2: reg 24 32bit mmio:
[0x94504000-0x945047ff]
[ 0.199354] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.199421] pci 0000:00:1f.2: PME# disabled
[ 0.199524] pci 0000:00:1f.3: reg 10 64bit mmio:
[0x94505000-0x945050ff]
[ 0.199545] pci 0000:00:1f.3: reg 20 io port: [0x3000-0x301f]
[ 0.199641] pci 0000:01:00.0: reg 10 64bit mmio:
[0x93500000-0x9353ffff]
[ 0.199652] pci 0000:01:00.0: reg 18 io port: [0x2000-0x207f]
[ 0.199731] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot
D3cold
[ 0.199803] pci 0000:01:00.0: PME# disabled
[ 0.204115] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff]
[ 0.204122] pci 0000:00:1c.0: bridge 32bit mmio:
[0x93500000-0x944fffff]
[ 0.204132] pci 0000:00:1c.0: bridge 64bit mmio pref:
[0x90400000-0x913fffff]
[ 0.204227] pci 0000:02:00.0: reg 10 64bit mmio:
[0x92500000-0x92501fff]
[ 0.204345] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.204417] pci 0000:02:00.0: PME# disabled
[ 0.212131] pci 0000:00:1c.3: bridge io port: [0x1000-0x1fff]
[ 0.212138] pci 0000:00:1c.3: bridge 32bit mmio:
[0x92500000-0x934fffff]
[ 0.212148] pci 0000:00:1c.3: bridge 64bit mmio pref:
[0x91400000-0x923fffff]
[ 0.212218] pci 0000:00:1e.0: transparent bridge
[ 0.212312] pci_bus 0000:00: on NUMA node 0
[ 0.212323] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.212783] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.212941] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
[ 0.231534] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11
12)
[ 0.232188] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11
12)
[ 0.232841] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11
12)
[ 0.233490] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11
12)
[ 0.234142] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12)
*0, disabled.
[ 0.234890] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12)
*0, disabled.
[ 0.235636] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11
12)
[ 0.236276] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11
12)
[ 0.236884] vgaarb: device added: PCI:0000:00:02.0,decodes=io
+mem,owns=io+mem,locks=none
[ 0.236980] vgaarb: loaded
[ 0.237113] PCI: Using ACPI for IRQ routing
[ 0.237386] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.237656] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.240013] Switching to clocksource tsc
[ 0.241858] pnp: PnP ACPI init
[ 0.241932] ACPI: bus type pnp registered
[ 0.243441] pnp 00:01: io resource (0x164e-0x164f) overlaps
0000:00:1c.3 BAR 13 (0x1000-0x1fff), disabling
[ 0.244395] pnp: PnP ACPI: found 9 devices
[ 0.244459] ACPI: ACPI bus type pnp unregistered
[ 0.244524] PnPBIOS: Disabled by ACPI PNP
[ 0.244596] system 00:01: ioport range 0x600-0x60f has been reserved
[ 0.244665] system 00:01: ioport range 0x610-0x610 has been reserved
[ 0.244734] system 00:01: ioport range 0x800-0x80f has been reserved
[ 0.244802] system 00:01: ioport range 0x810-0x817 has been reserved
[ 0.244870] system 00:01: ioport range 0x820-0x823 has been reserved
[ 0.244938] system 00:01: ioport range 0x400-0x47f has been reserved
[ 0.245006] system 00:01: ioport range 0x500-0x53f has been reserved
[ 0.245075] system 00:01: iomem range 0xf8000000-0xfbffffff has been
reserved
[ 0.245145] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been
reserved
[ 0.245215] system 00:01: iomem range 0xfed10000-0xfed13fff has been
reserved
[ 0.245285] system 00:01: iomem range 0xfed18000-0xfed18fff has been
reserved
[ 0.245354] system 00:01: iomem range 0xfed19000-0xfed19fff has been
reserved
[ 0.245425] system 00:01: iomem range 0xfec00000-0xfec00fff could not
be reserved
[ 0.245508] system 00:01: iomem range 0xfed20000-0xfed3ffff has been
reserved
[ 0.245578] system 00:01: iomem range 0xfed40000-0xfed44fff has been
reserved
[ 0.245649] system 00:01: iomem range 0xfed45000-0xfed8ffff has been
reserved
[ 0.245718] system 00:01: iomem range 0xfee00000-0xfee00fff has been
reserved
[ 0.280579] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[ 0.280648] pci 0000:00:1c.0: IO window: 0x2000-0x2fff
[ 0.280717] pci 0000:00:1c.0: MEM window: 0x93500000-0x944fffff
[ 0.280787] pci 0000:00:1c.0: PREFETCH window:
0x00000090400000-0x000000913fffff
[ 0.280875] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:02
[ 0.280943] pci 0000:00:1c.3: IO window: 0x1000-0x1fff
[ 0.281013] pci 0000:00:1c.3: MEM window: 0x92500000-0x934fffff
[ 0.281083] pci 0000:00:1c.3: PREFETCH window:
0x00000091400000-0x000000923fffff
[ 0.281171] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[ 0.281236] pci 0000:00:1e.0: IO window: disabled
[ 0.281303] pci 0000:00:1e.0: MEM window: disabled
[ 0.281370] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.281454] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ
17
[ 0.281525] pci 0000:00:1c.0: setting latency timer to 64
[ 0.281539] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ
19
[ 0.281609] pci 0000:00:1c.3: setting latency timer to 64
[ 0.281619] pci 0000:00:1e.0: setting latency timer to 64
[ 0.281625] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.281629] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.281633] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff]
[ 0.281637] pci_bus 0000:01: resource 1 mem: [0x93500000-0x944fffff]
[ 0.281642] pci_bus 0000:01: resource 2 pref mem
[0x90400000-0x913fffff]
[ 0.281646] pci_bus 0000:02: resource 0 io: [0x1000-0x1fff]
[ 0.281650] pci_bus 0000:02: resource 1 mem: [0x92500000-0x934fffff]
[ 0.281654] pci_bus 0000:02: resource 2 pref mem
[0x91400000-0x923fffff]
[ 0.281658] pci_bus 0000:03: resource 3 io: [0x00-0xffff]
[ 0.281662] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
[ 0.281698] NET: Registered protocol family 2
[ 0.281866] IP route cache hash table entries: 32768 (order: 5,
131072 bytes)
[ 0.282298] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.282917] TCP bind hash table entries: 65536 (order: 7, 524288
bytes)
[ 0.283247] TCP: Hash tables configured (established 131072 bind
65536)
[ 0.283316] TCP reno registered
[ 0.283475] NET: Registered protocol family 1
[ 0.283563] pci 0000:00:02.0: Boot video device
[ 0.315225] Unpacking initramfs...
[ 0.725897] Freeing initrd memory: 9814k freed
[ 0.732031] DMAR: Host address width 36
[ 0.732101] DMAR: DRHD base: 0x00000000000000 flags: 0x1
[ 0.732174] DMAR: parse DMAR table failure.
[ 0.732278] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[ 0.732350] Simple Boot Flag at 0x44 set to 0x1
[ 0.732823] audit: initializing netlink socket (disabled)
[ 0.732906] type=2000 audit(1268429555.731:1): initialized
[ 0.733206] highmem bounce pool size: 64 pages
[ 0.733278] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.735386] VFS: Disk quotas dquot_6.5.2
[ 0.735527] Dquot-cache hash table entries: 1024 (order 0, 4096
bytes)
[ 0.735693] msgmni has been set to 1724
[ 0.735994] alg: No test for stdrng (krng)
[ 0.736129] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[ 0.736216] io scheduler noop registered
[ 0.736283] io scheduler anticipatory registered
[ 0.736351] io scheduler deadline registered
[ 0.736466] io scheduler cfq registered (default)
[ 0.736706] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.736721] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.736911] pcieport 0000:00:1c.3: irq 25 for MSI/MSI-X
[ 0.736924] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.737141] isapnp: Scanning for PnP cards...
[ 1.091255] isapnp: No Plug & Play device found
[ 1.093234] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.093803] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at
0x60,0x64 irq 1,12
[ 1.101465] i8042.c: Detected active multiplexing controller, rev
1.1.
[ 1.105458] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.105532] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.105634] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.105733] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.105829] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.106008] mice: PS/2 mouse device common for all mice
[ 1.106146] rtc_cmos 00:03: RTC can wake from S4
[ 1.106257] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.106360] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.106445] cpuidle: using governor ladder
[ 1.106512] cpuidle: using governor menu
[ 1.106582] No iBFT detected.
[ 1.107117] TCP cubic registered
[ 1.107374] NET: Registered protocol family 10
[ 1.108059] lo: Disabled Privacy Extensions
[ 1.108550] Mobile IPv6
[ 1.108615] NET: Registered protocol family 17
[ 1.108697] Using IPI No-Shortcut mode
[ 1.108846] PM: Resume from disk failed.
[ 1.108853] registered taskstats version 1
[ 1.109424] rtc_cmos 00:03: setting system clock to 2010-03-12
21:32:36 UTC (1268429556)
[ 1.109608] Freeing unused kernel memory: 368k freed
[ 1.109914] Write protecting the kernel text: 2432k
[ 1.110011] Write protecting the kernel read-only data: 888k
[ 1.126689] input: AT Translated Set 2 keyboard
as /devices/platform/i8042/serio0/input/input0
[ 1.420288] usbcore: registered new interface driver usbfs
[ 1.420520] usbcore: registered new interface driver hub
[ 1.420735] usbcore: registered new device driver usb
[ 1.437529] SCSI subsystem initialized
[ 1.440840] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
Driver
[ 1.440951] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low)
-> IRQ 19
[ 1.441046] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.441051] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.441145] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned
bus number 1
[ 1.442083] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.446025] ehci_hcd 0000:00:1a.7: cache line size of 32 is not
supported
[ 1.446739] ehci_hcd 0000:00:1a.7: irq 19, io mem 0x94504c00
[ 1.464013] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.464112] usb usb1: New USB device found, idVendor=1d6b,
idProduct=0002
[ 1.464185] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.464272] usb usb1: Product: EHCI Host Controller
[ 1.464341] usb usb1: Manufacturer: Linux 2.6.32-3-686 ehci_hcd
[ 1.464411] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.464654] usb usb1: configuration #1 chosen from 1 choice
[ 1.464814] hub 1-0:1.0: USB hub found
[ 1.464890] hub 1-0:1.0: 2 ports detected
[ 1.465044] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low)
-> IRQ 23
[ 1.465206] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.465212] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.465291] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus number 2
[ 1.465411] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.469370] ehci_hcd 0000:00:1d.7: cache line size of 32 is not
supported
[ 1.469597] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x94504800
[ 1.472870] input: Power Button
as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 1.472998] ACPI: Power Button [PWRB]
[ 1.473200] input: Lid Switch
as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 1.473461] Linux agpgart interface v0.103
[ 1.473735] libata version 3.00 loaded.
[ 1.477231] ACPI: Lid Switch [LID0]
[ 1.477418] input: Sleep Button
as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[ 1.477511] ACPI: Sleep Button [SLPB]
[ 1.477705] input: Power Button
as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 1.477795] ACPI: Power Button [PWRF]
[ 1.491938] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.492042] usb usb2: New USB device found, idVendor=1d6b,
idProduct=0002
[ 1.492116] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.492203] usb usb2: Product: EHCI Host Controller
[ 1.492272] usb usb2: Manufacturer: Linux 2.6.32-3-686 ehci_hcd
[ 1.492344] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.492534] usb usb2: configuration #1 chosen from 1 choice
[ 1.492644] hub 2-0:1.0: USB hub found
[ 1.492719] hub 2-0:1.0: 6 ports detected
[ 1.496989] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45
Express Chipset
[ 1.498210] agpgart-intel 0000:00:00.0: detected 65532K stolen memory
[ 1.522013] [drm] Initialized drm 1.1.0 20060810
[ 1.541497] agpgart-intel 0000:00:00.0: AGP aperture is 256M @
0x80000000
[ 1.541601] ahci 0000:00:1f.2: version 3.0
[ 1.541620] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) ->
IRQ 19
[ 1.541749] ahci 0000:00:1f.2: irq 26 for MSI/MSI-X
[ 1.541809] ahci: SSS flag set, parallel bus scan disabled
[ 1.541926] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps
0x33 impl SATA mode
[ 1.542017] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led pmp
pio slum part ccc ems
[ 1.542110] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.558919] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.564571] scsi0 : ahci
[ 1.564806] scsi1 : ahci
[ 1.565006] scsi2 : ahci
[ 1.565203] scsi3 : ahci
[ 1.565397] scsi4 : ahci
[ 1.565592] scsi5 : ahci
[ 1.565714] ata1: SATA max UDMA/133 abar m2048@0x94504000 port
0x94504100 irq 26
[ 1.565803] ata2: SATA max UDMA/133 abar m2048@0x94504000 port
0x94504180 irq 26
[ 1.565890] ata3: DUMMY
[ 1.565953] ata4: DUMMY
[ 1.566019] ata5: SATA max UDMA/133 abar m2048@0x94504000 port
0x94504300 irq 26
[ 1.566107] ata6: SATA max UDMA/133 abar m2048@0x94504000 port
0x94504380 irq 26
[ 1.566229] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low)
-> IRQ 16
[ 1.566311] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.566317] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.566463] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned
bus number 3
[ 1.566590] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000030a0
[ 1.566706] usb usb3: New USB device found, idVendor=1d6b,
idProduct=0001
[ 1.566779] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.566866] usb usb3: Product: UHCI Host Controller
[ 1.566935] usb usb3: Manufacturer: Linux 2.6.32-3-686 uhci_hcd
[ 1.567006] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.567176] usb usb3: configuration #1 chosen from 1 choice
[ 1.567339] hub 3-0:1.0: USB hub found
[ 1.567416] hub 3-0:1.0: 2 ports detected
[ 1.567565] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 1.567642] i915 0000:00:02.0: setting latency timer to 64
[ 1.580281] i915 0000:00:02.0: irq 27 for MSI/MSI-X
[ 1.580292] [drm] set up 63M of stolen space
[ 1.892518] usb 2-2: new high speed USB device using ehci_hcd and
address 2
[ 2.038321] usb 2-2: New USB device found, idVendor=0781,
idProduct=5406
[ 2.038841] usb 2-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 2.039938] usb 2-2: Product: U3 Cruzer Micro
[ 2.040832] usb 2-2: Manufacturer: SanDisk
[ 2.042090] usb 2-2: SerialNumber: 0000188A16705DD5
[ 2.043321] usb 2-2: configuration #1 chosen from 1 choice
[ 2.048545] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.056129] Initializing USB Mass Storage driver...
[ 2.096188] ata1.00: ATA-8: WDC WD1600BEVT-22ZCT0, 11.01A11, max
UDMA/133
[ 2.097372] ata1.00: 312581808 sectors, multi 0: LBA48 NCQ (depth
31/32), AA
[ 2.098890] ata1.00: configured for UDMA/133
[ 2.112630] scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVT-2
11.0 PQ: 0 ANSI: 5
[ 2.156515] usb 2-5: new high speed USB device using ehci_hcd and
address 3
[ 2.157471] scsi6 : SCSI emulation for USB Mass Storage devices
[ 2.157699] usbcore: registered new interface driver usb-storage
[ 2.157842] USB Mass Storage support registered.
[ 2.157945] usb-storage: device found at 2
[ 2.157948] usb-storage: waiting for device to settle before scanning
[ 2.329189] usb 2-5: New USB device found, idVendor=064e,
idProduct=a102
[ 2.329193] usb 2-5: New USB device strings: Mfr=2, Product=1,
SerialNumber=3
[ 2.329196] usb 2-5: Product: WebCam
[ 2.329199] usb 2-5: Manufacturer: SuYin
[ 2.329202] usb 2-5: SerialNumber: CN0316-S30C-OV061-VA-R02.02.02
[ 2.329289] usb 2-5: configuration #1 chosen from 1 choice
[ 2.360191] [drm] LVDS-8: set mode 1366x768 18
[ 2.432526] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.687376] Console: switching to colour frame buffer device 170x48
[ 2.695632] fb0: inteldrmfb frame buffer device
[ 2.695634] registered panic notifier
[ 2.698420] acpi device:02: registered as cooling_device0
[ 2.698835] input: Video Bus
as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 2.698946] ACPI: Video Device [OVGA] (multi-head: yes rom: no
post: no)
[ 2.699057] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on
minor 0
[ 2.699173] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low)
-> IRQ 23
[ 2.699266] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.699271] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.699345] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 4
[ 2.699465] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003080
[ 2.699577] usb usb4: New USB device found, idVendor=1d6b,
idProduct=0001
[ 2.699657] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.699741] usb usb4: Product: UHCI Host Controller
[ 2.699799] usb usb4: Manufacturer: Linux 2.6.32-3-686 uhci_hcd
[ 2.699866] usb usb4: SerialNumber: 0000:00:1d.0
[ 2.701419] usb usb4: configuration #1 chosen from 1 choice
[ 2.702955] hub 4-0:1.0: USB hub found
[ 2.704515] hub 4-0:1.0: 2 ports detected
[ 2.706173] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low)
-> IRQ 19
[ 2.707818] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.707823] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.709523] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 5
[ 2.711281] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003060
[ 2.713085] usb usb5: New USB device found, idVendor=1d6b,
idProduct=0001
[ 2.714922] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.716843] usb usb5: Product: UHCI Host Controller
[ 2.718776] usb usb5: Manufacturer: Linux 2.6.32-3-686 uhci_hcd
[ 2.720767] usb usb5: SerialNumber: 0000:00:1d.1
[ 2.722842] usb usb5: configuration #1 chosen from 1 choice
[ 2.724945] hub 5-0:1.0: USB hub found
[ 2.727071] hub 5-0:1.0: 2 ports detected
[ 2.729270] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low)
-> IRQ 16
[ 2.731458] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.731463] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.733763] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 6
[ 2.736121] uhci_hcd 0000:00:1d.2: irq 16, io base 0x00003040
[ 2.738754] usb usb6: New USB device found, idVendor=1d6b,
idProduct=0001
[ 2.741155] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.743605] usb usb6: Product: UHCI Host Controller
[ 2.746073] usb usb6: Manufacturer: Linux 2.6.32-3-686 uhci_hcd
[ 2.748622] usb usb6: SerialNumber: 0000:00:1d.2
[ 2.751176] usb usb6: configuration #1 chosen from 1 choice
[ 2.753742] hub 6-0:1.0: USB hub found
[ 2.756232] hub 6-0:1.0: 2 ports detected
[ 2.796033] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.132019] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.158924] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160
GB/149 GiB)
[ 3.161554] sd 0:0:0:0: [sda] Write Protect is off
[ 3.164042] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.164074] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 3.166765] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 3.242454] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.754865] Uniform Multi-Platform E-IDE driver
[ 3.757902] ide_generic: please use "probe_mask=0x3f" module
parameter for probing all legacy ISA IDE ports
[ 3.760488] Probing IDE interface ide0...
[ 3.763470] ide0: no devices on the port
[ 3.766094] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 3.768660] Probing IDE interface ide1...
[ 3.771637] ide1: no devices on the port
[ 3.774196] ide1 at 0x170-0x177,0x376 on irq 15
[ 3.813541] NTFS driver 2.1.29 [Flags: R/W MODULE].
[ 3.844346] NTFS volume version 3.1.
[ 3.926177] NTFS volume version 3.1.
[ 4.022190] NTFS volume version 3.1.
[ 4.024626] NTFS-fs warning (device sda3): load_system_files():
Unsupported volume flags 0x4000 encountered.
[ 4.027114] NTFS-fs warning (device sda3): load_system_files():
Volume has unsupported flags set. Will not be able to remount
read-write. Run chkdsk and mount in Windows.
[ 4.240272] EXT4-fs (sda5): mounted filesystem with ordered data mode
[ 5.534326] NTFS volume version 3.1.
[ 5.593928] NTFS volume version 3.1.
[ 5.667699] NTFS volume version 3.1.
[ 5.670296] NTFS-fs warning (device sda3): load_system_files():
Unsupported volume flags 0x4000 encountered.
[ 5.672969] NTFS-fs warning (device sda3): load_system_files():
Volume has unsupported flags set. Will not be able to remount
read-write. Run chkdsk and mount in Windows.
[ 5.796799] EXT4-fs (sda5): mounted filesystem with ordered data mode
[ 7.046414] NTFS volume version 3.1.
[ 7.117135] NTFS volume version 3.1.
[ 7.156337] usb-storage: device scan complete
[ 7.156837] scsi 6:0:0:0: Direct-Access SanDisk U3 Cruzer Micro
4.05 PQ: 0 ANSI: 2
[ 7.160085] scsi 6:0:0:1: CD-ROM SanDisk U3 Cruzer Micro
4.05 PQ: 0 ANSI: 2
[ 7.165325] sd 6:0:0:0: [sdb] 8013453 512-byte logical blocks: (4.10
GB/3.82 GiB)
[ 7.169444] sd 6:0:0:0: [sdb] Write Protect is off
[ 7.172299] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 7.172303] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 7.177440] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 7.180230] sdb: sdb1
[ 7.184942] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 7.187764] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 7.190926] NTFS volume version 3.1.
[ 7.193636] NTFS-fs warning (device sda3): load_system_files():
Unsupported volume flags 0x4000 encountered.
[ 7.196470] NTFS-fs warning (device sda3): load_system_files():
Volume has unsupported flags set. Will not be able to remount
read-write. Run chkdsk and mount in Windows.
[ 7.203192] sr0: scsi3-mmc drive: 8x/40x writer xa/form2 cdda tray
[ 7.206256] Uniform CD-ROM driver Revision: 3.20
[ 7.209406] sr 6:0:0:1: Attached scsi CD-ROM sr0
[ 7.215733] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 7.218869] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 7.221979] sr 6:0:0:1: Attached scsi generic sg2 type 5
[ 7.342250] EXT4-fs (sda5): mounted filesystem with ordered data mode
[ 8.558505] NTFS volume version 3.1.
[ 8.618108] NTFS volume version 3.1.
[ 8.691876] NTFS volume version 3.1.
[ 8.694729] NTFS-fs warning (device sda3): load_system_files():
Unsupported volume flags 0x4000 encountered.
[ 8.697680] NTFS-fs warning (device sda3): load_system_files():
Volume has unsupported flags set. Will not be able to remount
read-write. Run chkdsk and mount in Windows.
[ 8.832091] EXT4-fs (sda5): mounted filesystem with ordered data mode
[ 8.971654] FAT: utf8 is not a recommended IO charset for FAT
filesystems, filesystem will be case sensitive!
[ 8.986785] aufs: module is from the staging directory, the quality
is unknown, you have been warned.
[ 8.996145] aufs 2-standalone.tree-32-20100125
[ 9.014905] loop: module loaded
[ 11.207111] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 19.956585] ACPI: Battery Slot [BAT1] (battery present)
[ 22.650815] udev: starting version 151
[ 22.780606] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[ 22.815136] input: PC Speaker
as /devices/platform/pcspkr/input/input6
[ 22.859996] cfg80211: Using static regulatory domain info
[ 22.862317] atl1c 0000:01:00.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 22.862332] atl1c 0000:01:00.0: setting latency timer to 64
[ 22.865751] cfg80211: Regulatory domain: US
[ 22.868742] (start_freq - end_freq @ bandwidth), (max_antenna_gain,
max_eirp)
[ 22.871770] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700
mBm)
[ 22.874798] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300
mBm)
[ 22.877675] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300
mBm)
[ 22.880468] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300
mBm)
[ 22.880524] ACPI: SSDT 7ba6fc98 001E1 (v01 PmRef Cpu0Ist 00003000
INTL 20051117)
[ 22.881313] ACPI: SSDT 7ba6d598 00537 (v01 PmRef Cpu0Cst 00003001
INTL 20051117)
[ 22.882469] Monitor-Mwait will be used to enter C-1 state
[ 22.882504] Monitor-Mwait will be used to enter C-2 state
[ 22.882512] Marking TSC unstable due to TSC halts in idle
[ 22.883488] processor LNXCPU:00: registered as cooling_device1
[ 22.884239] ACPI: SSDT 7ba6ee18 001CF (v01 PmRef ApIst 00003000
INTL 20051117)
[ 22.884865] ACPI: SSDT 7ba6ff18 0008D (v01 PmRef ApCst 00003000
INTL 20051117)
[ 22.885349] Switching to clocksource hpet
[ 22.901671] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300
mBm)
[ 22.904209] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000
mBm)
[ 22.907409] cfg80211: Calling CRDA for country: US
[ 22.932097] processor LNXCPU:01: registered as cooling_device2
[ 22.965061] atl1c 0000:01:00.0: version 1.0.0.1-NAPI
[ 22.975850] ACPI: WMI: Mapper loaded
[ 23.053711] ACPI: AC Adapter [ACAD] (off-line)
[ 23.061849] acer-wmi: Acer Laptop ACPI-WMI Extras
[ 23.074954] acer-wmi: Brightness must be controlled by generic video
driver
[ 23.107592] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux,
1.3.27ks
[ 23.110223] iwlagn: Copyright(c) 2003-2009 Intel Corporation
[ 23.129322] iwlagn 0000:02:00.0: PCI INT A -> GSI 19 (level, low) ->
IRQ 19
[ 23.131957] iwlagn 0000:02:00.0: setting latency timer to 64
[ 23.132162] iwlagn 0000:02:00.0: Detected Intel Wireless WiFi Link
1000 Series BGN REV=0x6C
[ 23.143082] Linux video capture interface: v2.00
[ 23.170271] iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 0
802.11a channels
[ 23.173159] iwlagn 0000:02:00.0: irq 28 for MSI/MSI-X
[ 23.173337] uvcvideo: Found UVC 1.00 device WebCam (064e:a102)
[ 23.198484] input: WebCam
as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input7
[ 23.201714] usbcore: registered new interface driver uvcvideo
[ 23.204683] USB Video Class driver (v0.1.0)
[ 23.286130] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 23.423149] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low)
-> IRQ 22
[ 23.426040] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 23.544435] hda_codec: ALC269: BIOS auto-probing.
[ 23.547767] input: HDA Digital PCBeep
as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 23.710043] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps:
0xd04731/0xa40000
[ 23.757585] input: SynPS/2 Synaptics TouchPad
as /devices/platform/i8042/serio2/input/input9
[ 23.937158] device-mapper: uevent: version 1.0.3
[ 23.940430] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01)
initialised: dm-devel@redhat.com
[ 24.651196] fuse init (API version 7.13)
[ 25.135817] Bluetooth: Core ver 2.15
[ 25.139020] NET: Registered protocol family 31
[ 25.141865] Bluetooth: HCI device and connection manager initialized
[ 25.144768] Bluetooth: HCI socket layer initialized
[ 25.154254] Bluetooth: L2CAP ver 2.14
[ 25.157100] Bluetooth: L2CAP socket layer initialized
[ 25.197587] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 25.200410] Bluetooth: BNEP filters: protocol multicast
[ 25.227849] Bridge firewalling registered
[ 25.248611] Bluetooth: SCO (Voice Link) ver 0.6
[ 25.251359] Bluetooth: SCO socket layer initialized
[ 26.026147] lp: driver loaded but no devices found
[ 26.040439] ppdev: user-space parallel port driver
[ 29.264009] CPU0 attaching NULL sched-domain.
[ 29.264017] CPU1 attaching NULL sched-domain.
[ 29.284601] CPU0 attaching sched-domain:
[ 29.284608] domain 0: span 0-1 level MC
[ 29.284612] groups: 0 1
[ 29.284619] domain 1: span 0-1 level CPU
[ 29.284622] groups: 0-1 (cpu_power = 2048)
[ 29.284630] CPU1 attaching sched-domain:
[ 29.284633] domain 0: span 0-1 level MC
[ 29.284637] groups: 1 0
[ 29.284643] domain 1: span 0-1 level CPU
[ 29.284646] groups: 0-1 (cpu_power = 2048)
[ 54.307913] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 54.308692] ISOFS: changing to secondary root
================== End dmesg
Thanks very much in forward,
Gerber van der Graaf
Reply to: