Bug#608240: linux-image-2.6.26-2-r5k-cobalt: USB subsystem crashes causing EXT3 buffer I/O error and data loss on MIPS system
Package: linux-image-2.6.26-2-r5k-cobalt
Version: 2.6.26-26lenny1
Severity: critical
Using a PCI USB adapter in Cobalt Qube - access to simple external
hard disks is unreliable. Even when in an idle
state the subsystem (after some variable period of time) crashes
causing data loss and inability to access the drive. Have tried
multiple USB PCI cards with the same results.
[lspci]
00:00.0 Host bridge: Marvell Technology Group Ltd. Device 4146 (rev 11)
00:07.0 Ethernet controller: Digital Equipment Corporation DECchip
21142/43 (rev 41)
00:09.0 ISA bridge: VIA Technologies, Inc. VT82C586/A/B PCI-to-ISA
[Apollo VP] (rev 27)
00:09.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:09.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 02)
00:0a.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 62)
00:0a.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 62)
00:0a.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 65)
00:0a.3 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306 Fire II
IEEE 1394 OHCI Link Layer Controller (rev 80)
00:0c.0 Ethernet controller: Digital Equipment Corporation DECchip
21142/43 (rev 41)
[lsusb]
Bus 003 Device 003: ID 04fc:0c25 Sunplus Technology Co., Ltd SATALink SPIF225A
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[dmesg]
Buffer I/O error on device sda1, logical block 520
[17212924.352000] EXT3-fs error (device sda1): ext3_readdir: directory
#2 contains a hole at offset 0
[17212924.368000] Buffer I/O error on device sda1, logical block 0
[17212924.368000] lost page write due to I/O error on sda1
[17212928.912000] EXT3-fs error (device sda1): ext3_find_entry:
reading directory #2 offset 0
[17212928.932000] ------------[ cut here ]------------
[17212928.936000] WARNING: at fs/buffer.c:1186 mark_buffer_dirty+0xc4/0xdc()
[17212928.944000] Modules linked in: sd_mod usb_storage scsi_mod nfsd
lockd nfs_acl auth_rpcgss sunrpc exportfs ipv6 loop ohci1394 ehci_hcd
uhci_hcd ieee1394 usbcore
[17212928.960000] Call Trace:
[17212928.964000] [<80086b00>] dump_stack+0x8/0x34
[17212928.968000] [<800a4090>] warn_on_slowpath+0x60/0x88
[17212928.972000] [<80139ec0>] mark_buffer_dirty+0xc4/0xdc
[17212928.980000] [<80173f08>] ext3_commit_super+0x5c/0x9c
[17212928.984000] [<80174db0>] ext3_handle_error+0x94/0xfc
[17212928.988000] [<80174f00>] ext3_error+0x58/0x6c
[17212928.996000] [<80170af4>] ext3_find_entry+0x51c/0x6e4
[17212929.000000] [<80172a98>] ext3_lookup+0x50/0x118
[17212929.004000] [<8011861c>] do_lookup+0x1e0/0x210
[17212929.012000] [<8011a8d0>] __link_path_walk+0x500/0xe24
[17212929.016000] [<8011b244>] path_walk+0x50/0xe0
[17212929.020000] [<8011b4ec>] do_path_lookup+0x74/0x190
[17212929.024000] [<8011c14c>] __user_walk_fd+0x54/0x88
[17212929.032000] [<80113aa0>] vfs_stat_fd+0x28/0x68
[17212929.036000] [<80113be0>] sys_stat64+0x20/0x50
[17212929.040000] [<800890ec>] stack_done+0x20/0x3c
[17212929.044000]
[17212929.048000] ---[ end trace 37ff880bcc35af8e ]---
[17212929.052000] Buffer I/O error on device sda1, logical block 0
[17212929.052000] lost page write due to I/O error on sda1
[17224550.320000] EXT3-fs error (device sda1): ext3_readdir: directory
#2 contains a hole at offset 0
[17224550.332000] Buffer I/O error on device sda1, logical block 0
[17224550.332000] lost page write due to I/O error on sda1
[17224550.360000] EXT3-fs error (device sda1): ext3_get_inode_loc:
unable to read inode block - inode=2, block=8
[17224550.372000] Buffer I/O error on device sda1, logical block 0
[17224550.372000] lost page write due to I/O error on sda1
[17224550.392000] EXT3-fs error (device sda1) in
ext3_reserve_inode_write: IO failure
[17224550.404000] Buffer I/O error on device sda1, logical block 0
[17224550.404000] lost page write due to I/O error on sda1
[17224553.712000] EXT3-fs error (device sda1): ext3_readdir: directory
#2 contains a hole at offset 0
[17224553.724000] Buffer I/O error on device sda1, logical block 0
[17224553.724000] lost page write due to I/O error on sda1
[17224553.748000] EXT3-fs error (device sda1): ext3_get_inode_loc:
unable to read inode block - inode=2, block=8
[17224553.760000] Buffer I/O error on device sda1, logical block 0
[17224553.760000] lost page write due to I/O error on sda1
[17224553.780000] EXT3-fs error (device sda1) in
ext3_reserve_inode_write: IO failure
[17224553.792000] Buffer I/O error on device sda1, logical block 0
[17224553.792000] lost page write due to I/O error on sda1
[17224555.936000] journal_bmap: journal block not found at offset 4672 on sda1
[17224555.944000] Aborting journal on device sda1.
[17224555.948000] Buffer I/O error on device sda1, logical block 525
[17224555.948000] lost page write due to I/O error on sda1
-- System Information:
Debian Release: 5.0.7
APT prefers stable
APT policy: (500, 'stable')
Architecture: mipsel (mips)
Kernel: Linux 2.6.26-2-r5k-cobalt
Locale: LANG=en_PH.UTF-8, LC_CTYPE=en_PH.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-2-r5k-cobalt depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
linux-image-2.6.26-2-r5k-cobalt recommends no packages.
Versions of packages linux-image-2.6.26-2-r5k-cobalt suggests:
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information:
linux-image-2.6.26-2-r5k-cobalt/postinst/old-initrd-link-2.6.26-2-r5k-cobalt:
true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-2-r5k-cobalt/postinst/old-dir-initrd-link-2.6.26-2-r5k-cobalt:
true
linux-image-2.6.26-2-r5k-cobalt/postinst/depmod-error-initrd-2.6.26-2-r5k-cobalt:
false
linux-image-2.6.26-2-r5k-cobalt/postinst/bootloader-error-2.6.26-2-r5k-cobalt:
linux-image-2.6.26-2-r5k-cobalt/postinst/create-kimage-link-2.6.26-2-r5k-cobalt:
true
linux-image-2.6.26-2-r5k-cobalt/preinst/abort-overwrite-2.6.26-2-r5k-cobalt:
linux-image-2.6.26-2-r5k-cobalt/postinst/kimage-is-a-directory:
linux-image-2.6.26-2-r5k-cobalt/preinst/abort-install-2.6.26-2-r5k-cobalt:
linux-image-2.6.26-2-r5k-cobalt/preinst/bootloader-initrd-2.6.26-2-r5k-cobalt:
true
linux-image-2.6.26-2-r5k-cobalt/preinst/elilo-initrd-2.6.26-2-r5k-cobalt: true
linux-image-2.6.26-2-r5k-cobalt/preinst/lilo-has-ramdisk:
linux-image-2.6.26-2-r5k-cobalt/postinst/depmod-error-2.6.26-2-r5k-cobalt:
false
linux-image-2.6.26-2-r5k-cobalt/preinst/overwriting-modules-2.6.26-2-r5k-cobalt:
true
linux-image-2.6.26-2-r5k-cobalt/preinst/initrd-2.6.26-2-r5k-cobalt:
linux-image-2.6.26-2-r5k-cobalt/postinst/bootloader-test-error-2.6.26-2-r5k-cobalt:
linux-image-2.6.26-2-r5k-cobalt/preinst/failed-to-move-modules-2.6.26-2-r5k-cobalt:
linux-image-2.6.26-2-r5k-cobalt/prerm/removing-running-kernel-2.6.26-2-r5k-cobalt:
true
linux-image-2.6.26-2-r5k-cobalt/prerm/would-invalidate-boot-loader-2.6.26-2-r5k-cobalt:
true
linux-image-2.6.26-2-r5k-cobalt/postinst/old-system-map-link-2.6.26-2-r5k-cobalt:
true
linux-image-2.6.26-2-r5k-cobalt/preinst/lilo-initrd-2.6.26-2-r5k-cobalt: true
* linux-image-2.6.26-2-r5k-cobalt/preinst/already-running-this-2.6.26-2-r5k-cobalt:
--
Arthur F. Tyde III
o: +14154620347, m: +639209707278 (GMT+8)
Reply to: