Bug#607495: linux-image-2.6.32-5-amd64: kernel freeze
Package: linux-2.6
Version: 2.6.32-29
Severity: normal
I put together a script called reproduce-bug.sh that does all the work for you.
I will attach it when I get the Debian bug number by email.
This script doesn't require sudo or other enhanced proviledges to run.
Basically you run the script in an empty directory writeable by you, and
it will git clone v3c, treedb, meta-treedb and v3c-repo into their own
folders and create a "sandbox" folder to install them to.
Then it will "make && make install" the packages into the sandbox.
The problem stage is running "make check" in v3c-repo, so there's a warning
that you may experience a machine freeze and asking you to <Ctrl>-C to
abort, enter to proceed.
If you reproduced the problem then you will need to hold the power-off button
on your laptop down for five seconds or power off your machine (desktop).
-- Package-specific info:
** Version:
Linux version 2.6.32-5-amd64 (Debian 2.6.32-29) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Fri Dec 10 15:35:08 UTC 2010
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=/dev/mapper/VgCompaq-squeeze ro quiet vga=0x317 cryptopts=target=sda4_crypt,source=UUID=41d45178-c0d4-4d8f-a190-1c56b6328318,key=none,rootdev,lvm=VgCompaq-squeeze
** Not tainted
** Kernel log:
[ 12.960808] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 12.960811] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 12.960824] cfg80211: Calling CRDA for country: US
[ 12.988969] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 12.989956] i801_smbus 0000:00:1f.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 13.160327] Linux video capture interface: v2.00
[ 13.247102] udev[435]: renamed network interface eth0 to eth1
[ 13.268163] ACPI: AC Adapter [AC] (on-line)
[ 13.268414] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 13.268477] ACPI: Power Button [PWRB]
[ 13.268564] ACPI: WMI: Mapper loaded
[ 13.268846] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
[ 13.268964] ACPI: Lid Switch [LID0]
[ 13.269034] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
[ 13.269080] ACPI: Sleep Button [SLPB]
[ 13.269167] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 13.269201] ACPI: Power Button [PWRF]
[ 13.632312] [drm] Initialized drm 1.1.0 20060810
[ 13.634457] uvcvideo: Found UVC 1.00 device CNF7041 (04f2:b057)
[ 13.638331] input: CNF7041 as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input7
[ 13.638398] usbcore: registered new interface driver uvcvideo
[ 13.638401] USB Video Class driver (v0.1.0)
[ 13.672704] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input8
[ 13.709297] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input9
[ 13.946884] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 13.946891] i915 0000:00:02.0: setting latency timer to 64
[ 13.951194] ath5k 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 13.951213] ath5k 0000:01:00.0: setting latency timer to 64
[ 13.951318] ath5k 0000:01:00.0: registered as 'phy0'
[ 13.961964] alloc irq_desc for 26 on node -1
[ 13.961968] alloc kstat_irqs on node -1
[ 13.961983] i915 0000:00:02.0: irq 26 for MSI/MSI-X
[ 13.961991] [drm] set up 7M of stolen space
[ 14.102093] [drm] initialized overlay support
[ 14.451511] ath: EEPROM regdomain: 0x67
[ 14.451514] ath: EEPROM indicates we should expect a direct regpair map
[ 14.451518] ath: Country alpha2 being used: 00
[ 14.451519] ath: Regpair used: 0x67
[ 14.721603] phy0: Selected rate control algorithm 'minstrel'
[ 14.722351] Registered led device: ath5k-phy0::rx
[ 14.722369] Registered led device: ath5k-phy0::tx
[ 14.722372] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 14.830551] Console: switching to colour frame buffer device 180x56
[ 14.834503] fb0: inteldrmfb frame buffer device
[ 14.834505] registered panic notifier
[ 14.834575] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[ 14.835879] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[ 14.846138] acpi device:15: registered as cooling_device2
[ 14.846408] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[ 14.846475] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
[ 14.846502] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 14.846555] alloc irq_desc for 22 on node -1
[ 14.846557] alloc kstat_irqs on node -1
[ 14.846566] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 14.846639] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 14.932842] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 14.932960] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 14.933144] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 16.287402] loop: module loaded
[ 17.256590] Adding 5857272k swap on /dev/mapper/VgCompaq-swap. Priority:-1 extents:1 across:5857272k
[ 20.611674] kjournald starting. Commit interval 5 seconds
[ 20.611849] EXT3 FS on sda1, internal journal
[ 20.611855] EXT3-fs: mounted filesystem with ordered data mode.
[ 20.694398] kjournald starting. Commit interval 5 seconds
[ 20.697232] EXT3 FS on dm-3, internal journal
[ 20.697237] EXT3-fs: mounted filesystem with ordered data mode.
[ 20.773497] kjournald starting. Commit interval 5 seconds
[ 20.776349] EXT3 FS on dm-4, internal journal
[ 20.776354] EXT3-fs: mounted filesystem with ordered data mode.
[ 20.837434] EXT4-fs (dm-1): mounted filesystem with ordered data mode
[ 21.883223] fuse init (API version 7.13)
[ 23.607196] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input14
[ 26.252949] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 26.255779] eth1: link down
[ 26.256527] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 27.540918] Bluetooth: Core ver 2.15
[ 27.541004] NET: Registered protocol family 31
[ 27.541005] Bluetooth: HCI device and connection manager initialized
[ 27.541009] Bluetooth: HCI socket layer initialized
[ 27.578941] Bluetooth: L2CAP ver 2.14
[ 27.578944] Bluetooth: L2CAP socket layer initialized
[ 27.659070] Bluetooth: RFCOMM TTY layer initialized
[ 27.659074] Bluetooth: RFCOMM socket layer initialized
[ 27.659077] Bluetooth: RFCOMM ver 1.11
[ 27.800217] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 27.800220] Bluetooth: BNEP filters: protocol multicast
[ 27.946803] Bridge firewalling registered
[ 28.019966] Bluetooth: SCO (Voice Link) ver 0.6
[ 28.019969] Bluetooth: SCO socket layer initialized
[ 28.245515] lp: driver loaded but no devices found
[ 28.296677] ppdev: user-space parallel port driver
[ 71.851172] wlan0: direct probe to AP 00:14:d1:57:20:2d (try 1)
[ 71.854338] wlan0: direct probe responded
[ 71.854344] wlan0: authenticate with AP 00:14:d1:57:20:2d (try 1)
[ 71.856283] wlan0: authenticated
[ 71.856314] wlan0: associate with AP 00:14:d1:57:20:2d (try 1)
[ 71.948432] wlan0: RX AssocResp from 00:14:d1:57:20:2d (capab=0x431 status=0 aid=1)
[ 71.948440] wlan0: associated
[ 71.950795] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 82.569033] wlan0: no IPv6 routers present
** Model information
sys_vendor: Hewlett-Packard
product_name: Compaq Presario A900 Notebook PC
product_version: F.34
chassis_vendor: Hewlett-Packard
chassis_version: N/A
bios_vendor: Hewlett-Packard
bios_version: F.34
board_vendor: Hewlett-Packard
board_name: 30ED
board_version: 83.21
** Loaded modules:
Module Size Used by
acpi_cpufreq 5571 0
cpufreq_powersave 902 0
cpufreq_stats 2659 0
cpufreq_userspace 1992 0
cpufreq_conservative 5162 0
parport_pc 18855 0
ppdev 5030 0
lp 7462 0
parport 27954 3 parport_pc,ppdev,lp
sco 7209 2
bridge 39630 0
stp 1440 1 bridge
bnep 9427 2
rfcomm 29597 0
l2cap 24736 6 bnep,rfcomm
bluetooth 41827 6 sco,bnep,rfcomm,l2cap
uinput 6376 1
fuse 50369 1
ext3 106518 3
jbd 37085 1 ext3
loop 11799 0
snd_hda_codec_conexant 21869 1
snd_hda_intel 19987 1
snd_hda_codec 54244 2 snd_hda_codec_conexant,snd_hda_intel
arc4 1274 2
ecb 1841 2
snd_hwdep 5380 1 snd_hda_codec
snd_pcm_oss 32591 0
snd_mixer_oss 12606 1 snd_pcm_oss
ath5k 112242 0
snd_pcm 60503 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
i915 255064 2
joydev 8459 0
snd_seq_midi 4400 0
mac80211 137340 1 ath5k
snd_rawmidi 15515 1 snd_seq_midi
drm_kms_helper 20065 1 i915
snd_seq_midi_event 4628 1 snd_seq_midi
ath 8006 1 ath5k
snd_seq 42881 2 snd_seq_midi,snd_seq_midi_event
uvcvideo 52063 0
drm 142359 3 i915,drm_kms_helper
i2c_algo_bit 4225 1 i915
snd_timer 15582 2 snd_pcm,snd_seq
snd_seq_device 4493 3 snd_seq_midi,snd_rawmidi,snd_seq
videodev 29993 1 uvcvideo
v4l1_compat 11442 2 uvcvideo,videodev
v4l2_compat_ioctl32 8474 1 videodev
psmouse 49777 0
snd 46446 13 snd_hda_codec_conexant,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
video 17445 1 i915
serio_raw 3752 0
i2c_i801 7830 0
pcspkr 1699 0
soundcore 4598 1 snd
output 1692 1 video
cfg80211 101496 3 ath5k,mac80211,ath
i2c_core 15712 6 i915,drm_kms_helper,drm,i2c_algo_bit,videodev,i2c_i801
snd_page_alloc 6249 2 snd_hda_intel,snd_pcm
rfkill 13044 3 bluetooth,cfg80211
evdev 7352 26
led_class 2433 1 ath5k
wmi 4323 0
button 4650 1 i915
ac 2192 0
processor 29935 3 acpi_cpufreq
battery 4998 0
ext4 289033 2
mbcache 5050 2 ext3,ext4
jbd2 67015 1 ext4
crc16 1319 2 l2cap,ext4
sha256_generic 8692 2
aes_x86_64 7340 3
aes_generic 25714 1 aes_x86_64
cbc 2539 1
dm_crypt 10664 1
usb_storage 39561 0
dm_mod 53754 19 dm_crypt
sg 18744 0
sd_mod 29889 3
crc_t10dif 1276 1 sd_mod
sr_mod 12602 0
cdrom 29415 1 sr_mod
ata_generic 3047 0
ata_piix 21124 0
uhci_hcd 18521 0
ahci 32374 2
libata 133632 3 ata_generic,ata_piix,ahci
8139too 17981 0
8139cp 15941 0
mii 3210 2 8139too,8139cp
ehci_hcd 31151 0
thermal 11674 0
thermal_sys 11942 3 video,processor,thermal
scsi_mod 122149 5 usb_storage,sg,sd_mod,sr_mod,libata
usbcore 122034 5 uvcvideo,usb_storage,uhci_hcd,ehci_hcd
nls_base 6377 1 usbcore
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 03)
Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a02] (rev 03) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 26
Region 0: Memory at d1000000 (64-bit, non-prefetchable) [size=1M]
Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 30d0 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a03] (rev 03)
Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at d1100000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 04)
Subsystem: Conexant Systems, Inc. Presario C700 [14f1:5051]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 22
Region 0: Memory at d2400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d1300000-d23fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d0ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 04) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 21
Region 4: I/O ports at 3080 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 04) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 20
Region 4: I/O ports at 3060 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 04) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 19
Region 4: I/O ports at 3040 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 04) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at d2404800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f4) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 00001000-00001fff
Memory behind bridge: d1200000-d12fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller [8086:2815] (rev 04)
Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 04) (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 30a0 [size=16]
Kernel driver in use: ata_piix
00:1f.2 SATA controller [0106]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller [8086:2829] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 25
Region 0: I/O ports at 30b8 [size=8]
Region 1: I/O ports at 30dc [size=4]
Region 2: I/O ports at 30b0 [size=8]
Region 3: I/O ports at 30d8 [size=4]
Region 4: I/O ports at 3020 [size=32]
Region 5: Memory at d2404000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 04)
Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin D routed to IRQ 19
Region 0: Memory at d2404c00 (32-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 3000 [size=32]
Kernel driver in use: i801_smbus
01:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR5001 Wireless Network Adapter [168c:001c] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:137b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d1300000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath5k
02:01.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 1000 [size=256]
Region 1: Memory at d1200000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: 8139too
** USB devices:
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 04f2:b057 Chicony Electronics Co., Ltd integrated USB webcam
Bus 001 Device 002: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0 multicard reader
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_IE.UTF-8, LC_CTYPE=en_IE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii debconf [debconf-2.0] 1.5.36 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.5 tools for generating an initramfs
ii linux-base 2.6.32-29 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-amd64 recommends:
pn firmware-linux-free <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false
linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true
linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:
Reply to: