Bug#602292: Squeeze disk detection failed on MacBook Air 11.6"
> > same problem?
> > http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=600305
>
> Very likely, thanks for the pointer. However, this should be solved
> with the last installer which includes version 2.6.32-27 of the Linux
> kernel. Can you try again?
I gave it a try on the same hardware (MacBookAir3,1 1.6ghz, 128go SSD),
without success.
I used the latest installer (shipping Linux 2.6.32-27 indeed). While d-i
beta1 hung on ata1 error messages for a while, the latest installer does
not, but still fails to detect the SSD.
Attached to this message is the dmesg output using the latest d-i, as
well as ubuntu maverick's dmesg output, where the drive is detected
through ata_generic.
--
mike dentifrice <fluor@poivron.org>
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-27) (maks@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Sat Oct 30 14:18:21 UTC 2010
[ 0.000000] Command line: priority=low vga=788 initrd=/install.amd/initrd.gz -- BOOT_IMAGE=/install.amd/vmlinuz
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
[ 0.000000] BIOS-e820: 000000000008f000 - 0000000000090000 (reserved)
[ 0.000000] BIOS-e820: 0000000000090000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000af000000 (usable)
[ 0.000000] BIOS-e820: 00000000af000000 - 00000000bf000000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf000000 - 00000000bf719000 (usable)
[ 0.000000] BIOS-e820: 00000000bf719000 - 00000000bf939000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf939000 - 00000000bfef9000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfef9000 - 00000000bfeff000 (reserved)
[ 0.000000] BIOS-e820: 00000000bfeff000 - 00000000bff00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000d3200000 - 00000000d3201000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 1 base 0BFF00000 mask FFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xbf719 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf719000
[ 0.000000] 0000000000 - 00bf600000 page 2M
[ 0.000000] 00bf600000 - 00bf719000 page 4k
[ 0.000000] kernel direct mapping tables up to bf719000 @ 8000-d000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[ 0.000000] 0100000000 - 0140000000 page 2M
[ 0.000000] kernel direct mapping tables up to 140000000 @ b000-11000
[ 0.000000] RAMDISK: 7fbe0000 - 7fffe032
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 APPLE )
[ 0.000000] ACPI: XSDT 00000000bf96a1c0 0008C (v01 APPLE Apple00 00000061 01000013)
[ 0.000000] ACPI: FACP 00000000bf968000 000F4 (v04 APPLE Apple00 00000061 Loki 0000005F)
[ 0.000000] ACPI: DSDT 00000000bf95b000 0572C (v01 APPLE MacBookA 00030001 INTL 20061109)
[ 0.000000] ACPI: FACS 00000000bf71e000 00040
[ 0.000000] ACPI: HPET 00000000bf967000 00038 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: APIC 00000000bf966000 00068 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: APIC 00000000bf965000 00068 (v02 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: ASF! 00000000bf963000 000A5 (v32 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SBST 00000000bf962000 00030 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: ECDT 00000000bf961000 00053 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SSDT 00000000bf957000 00024 (v01 APPLE Apple 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bf955000 0008A (v01 APPLE NoSDCard 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bf954000 004DC (v01 APPLE CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: MCFG 00000000bf964000 0003C (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SSDT 00000000bf95a000 000A5 (v01 SataRe SataPri 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bf959000 00074 (v01 SataRe SataSec 00001000 INTL 20061109)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000140000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000140000000
[ 0.000000] NODE_DATA [000000000000c000 - 0000000000013fff]
[ 0.000000] bootmap [0000000000014000 - 000000000003bfff] pages 28
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0140000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001688414] TEXT DATA BSS ==> [0001000000 - 0001688414]
[ 0.000000] #3 [007fbe0000 - 007fffe032] RAMDISK ==> [007fbe0000 - 007fffe032]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [0001689000 - 0001689219] BRK ==> [0001689000 - 0001689219]
[ 0.000000] #6 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000]
[ 0.000000] #7 [000000b000 - 000000c000] PGTABLE ==> [000000b000 - 000000c000]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880001800000-ffff880004ffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00140000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000008f
[ 0.000000] 0: 0x00000090 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000af000
[ 0.000000] 0: 0x000bf000 -> 0x000bf719
[ 0.000000] 0: 0x00100000 -> 0x00140000
[ 0.000000] On node 0 totalpages: 980663
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 103 pages reserved
[ 0.000000] DMA zone: 3839 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 700241 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 258560 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000008f000 - 0000000000090000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000af000000 - 00000000bf000000
[ 0.000000] PM: Registered nosave memory: 00000000bf719000 - 00000000bf939000
[ 0.000000] PM: Registered nosave memory: 00000000bf939000 - 00000000bfef9000
[ 0.000000] PM: Registered nosave memory: 00000000bfef9000 - 00000000bfeff000
[ 0.000000] PM: Registered nosave memory: 00000000bfeff000 - 00000000bff00000
[ 0.000000] PM: Registered nosave memory: 00000000bff00000 - 00000000d3200000
[ 0.000000] PM: Registered nosave memory: 00000000d3200000 - 00000000d3201000
[ 0.000000] PM: Registered nosave memory: 00000000d3201000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffc00000
[ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d3201000 (gap: d3201000:1cdff000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880005200000 s90328 r8192 d24360 u1048576
[ 0.000000] pcpu-alloc: s90328 r8192 d24360 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 962640
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: priority=low vga=788 initrd=/install.amd/initrd.gz -- BOOT_IMAGE=/install.amd/vmlinuz
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff88000531e000 - ffff88000931e000
[ 0.000000] software IO TLB at phys 0x531e000 - 0x931e000
[ 0.000000] Memory: 3787768k/5242880k available (3077k kernel code, 1320228k absent, 134884k reserved, 1893k data, 584k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:424
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1596.525 MHz processor.
[ 0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 3193.05 BogoMIPS (lpj=6386100)
[ 0.004033] Security Framework initialized
[ 0.004041] SELinux: Disabled at boot.
[ 0.004478] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.009536] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.010733] Mount-cache hash table entries: 256
[ 0.010913] Initializing cgroup subsys ns
[ 0.010920] Initializing cgroup subsys cpuacct
[ 0.010927] Initializing cgroup subsys devices
[ 0.010931] Initializing cgroup subsys freezer
[ 0.010936] Initializing cgroup subsys net_cls
[ 0.010972] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.010977] CPU: L2 cache: 3072K
[ 0.010982] CPU 0/0x0 -> Node 0
[ 0.010986] CPU: Physical Processor ID: 0
[ 0.010990] CPU: Processor Core ID: 0
[ 0.010995] mce: CPU supports 6 MCE banks
[ 0.011007] CPU0: Thermal monitoring enabled (TM2)
[ 0.011015] using mwait in idle threads.
[ 0.011019] Performance Events: Core2 events, Intel PMU driver.
[ 0.011028] ... version: 2
[ 0.011032] ... bit width: 40
[ 0.011035] ... generic registers: 2
[ 0.011039] ... value mask: 000000ffffffffff
[ 0.011043] ... max period: 000000007fffffff
[ 0.011047] ... fixed-purpose events: 3
[ 0.011051] ... event mask: 0000000700000003
[ 0.012455] ACPI: Core revision 20090903
[ 0.022068] Setting APIC routing to flat
[ 0.022478] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.062167] CPU0: Intel(R) Core(TM)2 Duo CPU U9600 @ 1.60GHz stepping 0a
[ 0.064001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 3072K
[ 0.008000] CPU 1/0x1 -> Node 0
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] CPU1: Thermal monitoring enabled (TM2)
[ 0.148072] CPU1: Intel(R) Core(TM)2 Duo CPU U9600 @ 1.60GHz stepping 0a
[ 0.148098] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.152021] Brought up 2 CPUs
[ 0.152027] Total of 2 processors activated (6386.57 BogoMIPS).
[ 0.152848] CPU0 attaching sched-domain:
[ 0.152853] domain 0: span 0-1 level MC
[ 0.152856] groups: 0 1
[ 0.152863] CPU1 attaching sched-domain:
[ 0.152865] domain 0: span 0-1 level MC
[ 0.152868] groups: 1 0
[ 0.152937] devtmpfs: initialized
[ 0.157477] regulator: core version 0.5
[ 0.157477] NET: Registered protocol family 16
[ 0.157477] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.157477] ACPI: bus type pci registered
[ 0.157477] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 2
[ 0.157477] PCI: MCFG area at f0000000 reserved in E820
[ 0.157477] PCI: Using MMCONFIG at f0000000 - f02fffff
[ 0.157477] PCI: Using configuration type 1 for base access
[ 0.157477] bio: create slab <bio-0> at 0
[ 0.160401] ACPI: EC: EC description table is found, configuring boot EC
[ 0.169366] ACPI: BIOS _OSI(Linux) query ignored
[ 0.170010] ACPI: Interpreter enabled
[ 0.170015] ACPI: (supports S0 S3 S4 S5)
[ 0.170045] ACPI: Using IOAPIC for interrupt routing
[ 0.184389] ACPI: EC: GPE = 0x57, I/O: command/status = 0x66, data = 0x62
[ 0.184765] ACPI: No dock devices found.
[ 0.185103] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.188169] pci 0000:00:03.0: reg 10 io port: [0x2100-0x21ff]
[ 0.188285] pci 0000:00:03.2: reg 10 io port: [0x00-0xff]
[ 0.188302] pci 0000:00:03.2: reg 20 io port: [0x2240-0x227f]
[ 0.188308] pci 0000:00:03.2: reg 24 io port: [0x2200-0x223f]
[ 0.188334] pci 0000:00:03.2: PME# supported from D3hot D3cold
[ 0.188343] pci 0000:00:03.2: PME# disabled
[ 0.188526] pci 0000:00:03.4: reg 10 32bit mmio: [0xd3200000-0xd327ffff]
[ 0.188637] pci 0000:00:04.0: reg 10 32bit mmio: [0xd328a000-0xd328afff]
[ 0.188673] pci 0000:00:04.0: supports D1 D2
[ 0.188675] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.188682] pci 0000:00:04.0: PME# disabled
[ 0.188717] pci 0000:00:04.1: reg 10 32bit mmio: [0xd328b100-0xd328b1ff]
[ 0.188759] pci 0000:00:04.1: supports D1 D2
[ 0.188761] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.188768] pci 0000:00:04.1: PME# disabled
[ 0.188809] pci 0000:00:06.0: reg 10 32bit mmio: [0xd3289000-0xd3289fff]
[ 0.188844] pci 0000:00:06.0: supports D1 D2
[ 0.188847] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.188854] pci 0000:00:06.0: PME# disabled
[ 0.188888] pci 0000:00:06.1: reg 10 32bit mmio: [0xd328b000-0xd328b0ff]
[ 0.188930] pci 0000:00:06.1: supports D1 D2
[ 0.188933] pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.188939] pci 0000:00:06.1: PME# disabled
[ 0.188990] pci 0000:00:08.0: reg 10 32bit mmio: [0xd3280000-0xd3283fff]
[ 0.189032] pci 0000:00:08.0: PME# supported from D3hot D3cold
[ 0.189038] pci 0000:00:08.0: PME# disabled
[ 0.189077] pci 0000:00:0a.0: reg 10 io port: [0x2298-0x229f]
[ 0.189083] pci 0000:00:0a.0: reg 14 io port: [0x22a4-0x22a7]
[ 0.189089] pci 0000:00:0a.0: reg 18 io port: [0x2290-0x2297]
[ 0.189094] pci 0000:00:0a.0: reg 1c io port: [0x22a0-0x22a3]
[ 0.189100] pci 0000:00:0a.0: reg 20 io port: [0x2280-0x228f]
[ 0.189106] pci 0000:00:0a.0: reg 24 32bit mmio: [0xd3284000-0xd3285fff]
[ 0.189161] pci 0000:00:0b.0: reg 10 32bit mmio: [0xd3288000-0xd3288fff]
[ 0.189509] pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.189521] pci 0000:00:15.0: PME# disabled
[ 0.189619] pci 0000:00:17.0: PME# supported from D0 D3hot D3cold
[ 0.189625] pci 0000:00:17.0: PME# disabled
[ 0.189750] pci 0000:01:00.0: reg 10 64bit mmio: [0xd3100000-0xd3103fff]
[ 0.189816] pci 0000:01:00.0: supports D1 D2
[ 0.189819] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.189826] pci 0000:01:00.0: PME# disabled
[ 0.189927] pci 0000:00:15.0: bridge 32bit mmio: [0xd3100000-0xd31fffff]
[ 0.189976] pci 0000:02:00.0: reg 10 32bit mmio: [0xd2000000-0xd2ffffff]
[ 0.189984] pci 0000:02:00.0: reg 14 64bit mmio pref: [0xc0000000-0xcfffffff]
[ 0.189993] pci 0000:02:00.0: reg 1c 64bit mmio pref: [0xd0000000-0xd1ffffff]
[ 0.189999] pci 0000:02:00.0: reg 24 io port: [0x1000-0x107f]
[ 0.190005] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xd3000000-0xd301ffff]
[ 0.190061] pci 0000:00:17.0: bridge io port: [0x1000-0x1fff]
[ 0.190065] pci 0000:00:17.0: bridge 32bit mmio: [0xd2000000-0xd30fffff]
[ 0.190071] pci 0000:00:17.0: bridge 64bit mmio pref: [0xc0000000-0xd1ffffff]
[ 0.190095] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.190459] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT]
[ 0.236307] ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.236599] ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.236892] ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.237182] ACPI: PCI Interrupt Link [LNK4] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.237472] ACPI: PCI Interrupt Link [Z00J] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.237764] ACPI: PCI Interrupt Link [Z00K] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.238054] ACPI: PCI Interrupt Link [Z00L] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.238346] ACPI: PCI Interrupt Link [Z00M] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.238636] ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21 22 23) *15
[ 0.238926] ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 19 20 21 22 23) *11
[ 0.239214] ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 19 20 21 22 23) *10
[ 0.239509] ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.239799] ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 20 21 22 23) *15
[ 0.240101] ACPI: PCI Interrupt Link [LGPU] (IRQs 16 17 18 19 20 21 22 23) *11
[ 0.240392] ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.240683] ACPI: PCI Interrupt Link [LSI0] (IRQs 16 17 18 19 20 21 22 23) *11
[ 0.240979] ACPI: PCI Interrupt Link [Z000] (IRQs 16 17 18 19 20 21 22 23) *7
[ 0.241275] ACPI: PCI Interrupt Link [Z001] (IRQs 16 17 18 19 20 21 22 23) *5
[ 0.241569] ACPI: PCI Interrupt Link [LPMU] (IRQs 16 17 18 19 20 21 22 23) *14
[ 0.241722] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.241729] vgaarb: loaded
[ 0.241747] PCI: Using ACPI for IRQ routing
[ 0.241747] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
[ 0.241747] hpet0: 4 comparators, 64-bit 25.000000 MHz counter
[ 0.248023] Switching to clocksource tsc
[ 0.249483] pnp: PnP ACPI init
[ 0.249496] ACPI: bus type pnp registered
[ 0.250909] pnp 00:06: io resource (0x10-0x1f) overlaps 0000:00:03.2 BAR 0 (0x0-0xff), disabling
[ 0.250918] pnp 00:06: io resource (0x22-0x3f) overlaps 0000:00:03.2 BAR 0 (0x0-0xff), disabling
[ 0.250926] pnp 00:06: io resource (0x44-0x5f) overlaps 0000:00:03.2 BAR 0 (0x0-0xff), disabling
[ 0.250933] pnp 00:06: io resource (0x63-0x63) overlaps 0000:00:03.2 BAR 0 (0x0-0xff), disabling
[ 0.250940] pnp 00:06: io resource (0x65-0x65) overlaps 0000:00:03.2 BAR 0 (0x0-0xff), disabling
[ 0.250948] pnp 00:06: io resource (0x67-0x6f) overlaps 0000:00:03.2 BAR 0 (0x0-0xff), disabling
[ 0.250955] pnp 00:06: io resource (0x72-0x73) overlaps 0000:00:03.2 BAR 0 (0x0-0xff), disabling
[ 0.250962] pnp 00:06: io resource (0x74-0x7f) overlaps 0000:00:03.2 BAR 0 (0x0-0xff), disabling
[ 0.250970] pnp 00:06: io resource (0x91-0x93) overlaps 0000:00:03.2 BAR 0 (0x0-0xff), disabling
[ 0.250977] pnp 00:06: io resource (0x97-0x9f) overlaps 0000:00:03.2 BAR 0 (0x0-0xff), disabling
[ 0.250984] pnp 00:06: io resource (0xa2-0xbf) overlaps 0000:00:03.2 BAR 0 (0x0-0xff), disabling
[ 0.250992] pnp 00:06: io resource (0xe0-0xef) overlaps 0000:00:03.2 BAR 0 (0x0-0xff), disabling
[ 0.250999] pnp 00:06: io resource (0x80-0x80) overlaps 0000:00:03.2 BAR 0 (0x0-0xff), disabling
[ 0.258989] pnp: PnP ACPI: found 8 devices
[ 0.258994] ACPI: ACPI bus type pnp unregistered
[ 0.259008] system 00:01: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 0.259019] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.259028] system 00:06: ioport range 0x400-0x47f has been reserved
[ 0.259034] system 00:06: ioport range 0x480-0x4ff has been reserved
[ 0.259040] system 00:06: ioport range 0x500-0x57f has been reserved
[ 0.259045] system 00:06: ioport range 0x580-0x5ff has been reserved
[ 0.259051] system 00:06: ioport range 0x800-0x87f has been reserved
[ 0.259056] system 00:06: ioport range 0x880-0x8ff has been reserved
[ 0.259063] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
[ 0.259068] system 00:06: ioport range 0x295-0x296 has been reserved
[ 0.263854] pci 0000:00:15.0: PCI bridge, secondary bus 0000:01
[ 0.263859] pci 0000:00:15.0: IO window: disabled
[ 0.263874] pci 0000:00:15.0: MEM window: 0xd3100000-0xd31fffff
[ 0.263884] pci 0000:00:15.0: PREFETCH window: disabled
[ 0.263902] pci 0000:00:17.0: PCI bridge, secondary bus 0000:02
[ 0.263907] pci 0000:00:17.0: IO window: 0x1000-0x1fff
[ 0.263914] pci 0000:00:17.0: MEM window: 0xd2000000-0xd30fffff
[ 0.263920] pci 0000:00:17.0: PREFETCH window: 0x000000c0000000-0x000000d1ffffff
[ 0.264031] pci 0000:00:15.0: power state changed by ACPI to D0
[ 0.264134] pci 0000:00:15.0: power state changed by ACPI to D0
[ 0.264556] ACPI: PCI Interrupt Link [Z00J] enabled at IRQ 23
[ 0.264562] alloc irq_desc for 23 on node -1
[ 0.264565] alloc kstat_irqs on node -1
[ 0.264571] pci 0000:00:15.0: PCI INT A -> Link[Z00J] -> GSI 23 (level, low) -> IRQ 23
[ 0.264585] pci 0000:00:15.0: setting latency timer to 64
[ 0.264595] pci 0000:00:17.0: setting latency timer to 64
[ 0.264600] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.264603] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.264607] pci_bus 0000:01: resource 1 mem: [0xd3100000-0xd31fffff]
[ 0.264610] pci_bus 0000:02: resource 0 io: [0x1000-0x1fff]
[ 0.264613] pci_bus 0000:02: resource 1 mem: [0xd2000000-0xd30fffff]
[ 0.264616] pci_bus 0000:02: resource 2 pref mem [0xc0000000-0xd1ffffff]
[ 0.264649] NET: Registered protocol family 2
[ 0.264851] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.266366] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.270991] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.271593] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.271600] TCP reno registered
[ 0.271741] NET: Registered protocol family 1
[ 0.287969] pci 0000:02:00.0: Boot video device
[ 0.288033] Unpacking initramfs...
[ 0.422954] Freeing initrd memory: 4216k freed
[ 0.425578] audit: initializing netlink socket (disabled)
[ 0.425601] type=2000 audit(1291322818.423:1): initialized
[ 0.429797] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.431516] VFS: Disk quotas dquot_6.5.2
[ 0.431581] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.431685] msgmni has been set to 7406
[ 0.432148] alg: No test for stdrng (krng)
[ 0.432210] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.432218] io scheduler noop registered
[ 0.432222] io scheduler anticipatory registered
[ 0.432226] io scheduler deadline registered
[ 0.432269] io scheduler cfq registered (default)
[ 0.432631] alloc irq_desc for 24 on node -1
[ 0.432634] alloc kstat_irqs on node -1
[ 0.432660] pcieport 0000:00:15.0: irq 24 for MSI/MSI-X
[ 0.432684] pcieport 0000:00:15.0: setting latency timer to 64
[ 0.433103] vesafb: framebuffer at 0xd1000000, mapped to 0xffffc90001400000, using 1875k, total 14336k
[ 0.433110] vesafb: mode is 800x600x16, linelength=1600, pages=2
[ 0.433115] vesafb: scrolling: redraw
[ 0.433120] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 0.443051] Console: switching to colour frame buffer device 100x37
[ 0.452980] fb0: VESA VGA frame buffer device
[ 0.454789] Linux agpgart interface v0.103
[ 0.454965] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.455541] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.455846] PNP: No PS/2 controller found. Probing ports directly.
[ 0.456902] i8042.c: No controller found.
[ 0.457104] mice: PS/2 mouse device common for all mice
[ 0.457313] rtc_cmos 00:07: RTC can wake from S4
[ 0.457495] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.457735] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 0.457949] cpuidle: using governor ladder
[ 0.458076] cpuidle: using governor menu
[ 0.460085] No iBFT detected.
[ 0.462512] TCP cubic registered
[ 0.464762] NET: Registered protocol family 10
[ 0.467541] lo: Disabled Privacy Extensions
[ 0.470220] Mobile IPv6
[ 0.472591] NET: Registered protocol family 17
[ 0.475197] PM: Resume from disk failed.
[ 0.475212] registered taskstats version 1
[ 0.478357] rtc_cmos 00:07: setting system clock to 2010-12-02 20:46:59 UTC (1291322819)
[ 0.481328] Initalizing network drop monitor service
[ 0.484376] Freeing unused kernel memory: 584k freed
[ 0.487733] Write protecting the kernel read-only data: 4232k
[ 0.672122] usbcore: registered new interface driver usbfs
[ 0.743824] usbcore: registered new interface driver hub
[ 0.777309] usbcore: registered new device driver usb
[ 0.781121] SCSI subsystem initialized
[ 0.786954] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.791171] ehci_hcd 0000:00:04.1: power state changed by ACPI to D0
[ 0.795258] ehci_hcd 0000:00:04.1: power state changed by ACPI to D0
[ 0.799670] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
[ 0.803790] alloc irq_desc for 22 on node -1
[ 0.803793] alloc kstat_irqs on node -1
[ 0.803803] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUS2] -> GSI 22 (level, low) -> IRQ 22
[ 0.804551] libata version 3.00 loaded.
[ 0.808260] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 0.808264] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 0.812693] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
[ 0.817302] ehci_hcd 0000:00:04.1: debug port 1
[ 0.844006] ehci_hcd 0000:00:04.1: cache line size of 32 is not supported
[ 0.844027] ehci_hcd 0000:00:04.1: irq 22, io mem 0xd328b100
[ 0.860003] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.10
[ 0.864505] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.869091] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.873662] usb usb1: Product: EHCI Host Controller
[ 0.878120] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 0.882544] usb usb1: SerialNumber: 0000:00:04.1
[ 0.886984] usb usb1: configuration #1 chosen from 1 choice
[ 0.891389] hub 1-0:1.0: USB hub found
[ 0.895713] hub 1-0:1.0: 6 ports detected
[ 0.900060] ahci 0000:00:0a.0: version 3.0
[ 0.900195] ehci_hcd 0000:00:06.1: power state changed by ACPI to D0
[ 0.904670] ehci_hcd 0000:00:06.1: power state changed by ACPI to D0
[ 0.909308] ACPI: PCI Interrupt Link [Z001] enabled at IRQ 21
[ 0.913634] alloc irq_desc for 21 on node -1
[ 0.913636] alloc kstat_irqs on node -1
[ 0.913643] ehci_hcd 0000:00:06.1: PCI INT B -> Link[Z001] -> GSI 21 (level, low) -> IRQ 21
[ 0.918182] ehci_hcd 0000:00:06.1: setting latency timer to 64
[ 0.918186] ehci_hcd 0000:00:06.1: EHCI Host Controller
[ 0.922699] ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2
[ 0.927320] ehci_hcd 0000:00:06.1: debug port 1
[ 0.952018] ehci_hcd 0000:00:06.1: cache line size of 32 is not supported
[ 0.952034] ehci_hcd 0000:00:06.1: irq 21, io mem 0xd328b000
[ 0.968017] ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.10
[ 0.972565] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.977205] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.981785] usb usb2: Product: EHCI Host Controller
[ 0.986243] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 0.990749] usb usb2: SerialNumber: 0000:00:06.1
[ 0.995268] usb usb2: configuration #1 chosen from 1 choice
[ 0.999736] hub 2-0:1.0: USB hub found
[ 1.004245] hub 2-0:1.0: 6 ports detected
[ 1.046046] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.051127] ohci_hcd 0000:00:04.0: power state changed by ACPI to D0
[ 1.055802] ohci_hcd 0000:00:04.0: power state changed by ACPI to D0
[ 1.060658] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 20
[ 1.065221] alloc irq_desc for 20 on node -1
[ 1.065223] alloc kstat_irqs on node -1
[ 1.065231] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUS0] -> GSI 20 (level, low) -> IRQ 20
[ 1.069938] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 1.069942] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 1.074477] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3
[ 1.079071] ohci_hcd 0000:00:04.0: irq 20, io mem 0xd328a000
[ 1.138014] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.142618] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.147275] usb usb3: Product: OHCI Host Controller
[ 1.151945] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 1.156607] usb usb3: SerialNumber: 0000:00:04.0
[ 1.161292] usb usb3: configuration #1 chosen from 1 choice
[ 1.165918] hub 3-0:1.0: USB hub found
[ 1.170457] hub 3-0:1.0: 6 ports detected
[ 1.175098] ohci_hcd 0000:00:06.0: power state changed by ACPI to D0
[ 1.179798] ohci_hcd 0000:00:06.0: power state changed by ACPI to D0
[ 1.184693] ACPI: PCI Interrupt Link [Z000] enabled at IRQ 19
[ 1.189258] alloc irq_desc for 19 on node -1
[ 1.189261] alloc kstat_irqs on node -1
[ 1.189267] ohci_hcd 0000:00:06.0: PCI INT A -> Link[Z000] -> GSI 19 (level, low) -> IRQ 19
[ 1.193969] ohci_hcd 0000:00:06.0: setting latency timer to 64
[ 1.193972] ohci_hcd 0000:00:06.0: OHCI Host Controller
[ 1.198703] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4
[ 1.203476] ohci_hcd 0000:00:06.0: irq 19, io mem 0xd3289000
[ 1.216011] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 1.266014] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.270735] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.275473] usb usb4: Product: OHCI Host Controller
[ 1.280218] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 1.285050] usb usb4: SerialNumber: 0000:00:06.0
[ 1.289866] usb usb4: configuration #1 chosen from 1 choice
[ 1.294643] hub 4-0:1.0: USB hub found
[ 1.299306] hub 4-0:1.0: 6 ports detected
[ 1.365067] usb 1-1: New USB device found, idVendor=05ac, idProduct=1500
[ 1.369798] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.374547] usb 1-1: Product: MacBook Air SuperDrive
[ 1.379263] usb 1-1: Manufacturer: Apple Inc.
[ 1.383999] usb 1-1: SerialNumber: KZ1A9SI2223
[ 1.388742] usb 1-1: configuration #1 chosen from 1 choice
[ 1.404102] Initializing USB Mass Storage driver...
[ 1.408962] scsi0 : SCSI emulation for USB Mass Storage devices
[ 1.413840] usbcore: registered new interface driver usb-storage
[ 1.416011] usb-storage: device found at 2
[ 1.416013] usb-storage: waiting for device to settle before scanning
[ 1.418570] USB Mass Storage support registered.
[ 1.732029] usb 1-6: new high speed USB device using ehci_hcd and address 5
[ 1.878400] usb 1-6: New USB device found, idVendor=05ac, idProduct=850a
[ 1.878405] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.878408] usb 1-6: Product: Built-in iSight
[ 1.878410] usb 1-6: Manufacturer: Apple Inc.
[ 1.878412] usb 1-6: SerialNumber: CCGAABGH0ADF9KL0
[ 1.878538] usb 1-6: configuration #1 chosen from 1 choice
[ 1.996031] usb 2-2: new high speed USB device using ehci_hcd and address 2
[ 2.145926] usb 2-2: New USB device found, idVendor=05ac, idProduct=1402
[ 2.145930] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.145933] usb 2-2: Product: Apple USB Ethernet Adapter
[ 2.145936] usb 2-2: Manufacturer: Apple Inc.
[ 2.145938] usb 2-2: SerialNumber: 0A77B2
[ 2.146060] usb 2-2: configuration #1 chosen from 1 choice
[ 2.448015] usb 3-3: new full speed USB device using ohci_hcd and address 2
[ 2.671269] usb 3-3: New USB device found, idVendor=05ac, idProduct=0243
[ 2.671273] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.671276] usb 3-3: Product: Apple Internal Keyboard / Trackpad
[ 2.671279] usb 3-3: Manufacturer: Apple Inc.
[ 2.671396] usb 3-3: configuration #1 chosen from 1 choice
[ 2.690064] usbcore: registered new interface driver hiddev
[ 2.698857] input: Apple Inc. Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.0/input/input1
[ 2.698914] generic-usb 0003:05AC:0243.0001: input,hidraw0: USB HID v1.11 Keyboard [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:04.0-3/input0
[ 2.709313] generic-usb 0003:05AC:0243.0002: hidraw1: USB HID v1.11 Device [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:04.0-3/input1
[ 2.716498] input: Apple Inc. Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.2/input/input2
[ 2.716564] generic-usb 0003:05AC:0243.0003: input,hidraw2: USB HID v1.11 Mouse [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:04.0-3/input2
[ 2.716588] usbcore: registered new interface driver usbhid
[ 2.716590] usbhid: v2.6:USB HID core driver
[ 2.984015] usb 3-5: new full speed USB device using ohci_hcd and address 3
[ 3.205356] usb 3-5: New USB device found, idVendor=0a5c, idProduct=4500
[ 3.205360] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.205363] usb 3-5: Product: BRCM2070 Hub
[ 3.205365] usb 3-5: Manufacturer: Apple Inc.
[ 3.205451] usb 3-5: configuration #1 chosen from 1 choice
[ 3.208394] hub 3-5:1.0: USB hub found
[ 3.211356] hub 3-5:1.0: 3 ports detected
[ 3.517404] usb 3-5.1: new full speed USB device using ohci_hcd and address 4
[ 3.628422] usb 3-5.1: New USB device found, idVendor=05ac, idProduct=820a
[ 3.628426] usb 3-5.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.628491] usb 3-5.1: configuration #1 chosen from 1 choice
[ 3.637711] input: HID 05ac:820a as /devices/pci0000:00/0000:00:04.0/usb3/3-5/3-5.1/3-5.1:1.0/input/input3
[ 3.637764] generic-usb 0003:05AC:820A.0004: input,hidraw3: USB HID v1.11 Keyboard [HID 05ac:820a] on usb-0000:00:04.0-5.1/input0
[ 3.713436] usb 3-5.2: new full speed USB device using ohci_hcd and address 5
[ 3.824456] usb 3-5.2: New USB device found, idVendor=05ac, idProduct=820b
[ 3.824460] usb 3-5.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.824530] usb 3-5.2: configuration #1 chosen from 1 choice
[ 3.834691] input: HID 05ac:820b as /devices/pci0000:00/0000:00:04.0/usb3/3-5/3-5.2/3-5.2:1.0/input/input4
[ 3.834760] generic-usb 0003:05AC:820B.0005: input,hidraw4: USB HID v1.11 Mouse [HID 05ac:820b] on usb-0000:00:04.0-5.2/input0
[ 3.909468] usb 3-5.3: new full speed USB device using ohci_hcd and address 6
[ 4.029488] usb 3-5.3: New USB device found, idVendor=05ac, idProduct=821b
[ 4.029492] usb 3-5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.029495] usb 3-5.3: Product: Bluetooth USB Host Controller
[ 4.029497] usb 3-5.3: Manufacturer: Apple Inc.
[ 4.029573] usb 3-5.3: configuration #1 chosen from 1 choice
[ 6.416529] usb-storage: device scan complete
[ 6.418652] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRW GX30N RP09 PQ: 0 ANSI: 0
[ 6.434512] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 6.434516] Uniform CD-ROM driver Revision: 3.20
[ 6.434623] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 6.438602] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.35-22-generic (buildd@allspice) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu4) ) #33-Ubuntu SMP Sun Sep 19 20:32:27 UTC 2010 (Ubuntu 2.6.35-22.33-generic 2.6.35.4)
[ 0.000000] Command line: file=/cdrom/preseed/ubuntu.seed priority=low vga=788 initrd=/install/initrd.gz -- BOOT_IMAGE=/install/vmlinuz
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
[ 0.000000] BIOS-e820: 000000000008f000 - 0000000000090000 (reserved)
[ 0.000000] BIOS-e820: 0000000000090000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000af000000 (usable)
[ 0.000000] BIOS-e820: 00000000af000000 - 00000000bf000000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf000000 - 00000000bf719000 (usable)
[ 0.000000] BIOS-e820: 00000000bf719000 - 00000000bf939000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf939000 - 00000000bfef9000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfef9000 - 00000000bfeff000 (reserved)
[ 0.000000] BIOS-e820: 00000000bfeff000 - 00000000bff00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000d3200000 - 00000000d3201000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 1 base 0BFF00000 mask FFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xbf719 max_arch_pfn = 0x400000000
[ 0.000000] e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000008f000 (usable)
[ 0.000000] modified: 000000000008f000 - 0000000000090000 (reserved)
[ 0.000000] modified: 0000000000090000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000af000000 (usable)
[ 0.000000] modified: 00000000af000000 - 00000000bf000000 (reserved)
[ 0.000000] modified: 00000000bf000000 - 00000000bf719000 (usable)
[ 0.000000] modified: 00000000bf719000 - 00000000bf939000 (ACPI NVS)
[ 0.000000] modified: 00000000bf939000 - 00000000bfef9000 (ACPI data)
[ 0.000000] modified: 00000000bfef9000 - 00000000bfeff000 (reserved)
[ 0.000000] modified: 00000000bfeff000 - 00000000bff00000 (ACPI data)
[ 0.000000] modified: 00000000d3200000 - 00000000d3201000 (reserved)
[ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ffc00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf719000
[ 0.000000] 0000000000 - 00bf600000 page 2M
[ 0.000000] 00bf600000 - 00bf719000 page 4k
[ 0.000000] kernel direct mapping tables up to bf719000 @ 16000-1b000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[ 0.000000] 0100000000 - 0140000000 page 2M
[ 0.000000] kernel direct mapping tables up to 140000000 @ 19000-1f000
[ 0.000000] RAMDISK: 7f985000 - 7ffff000
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 APPLE )
[ 0.000000] ACPI: XSDT 00000000bf96a1c0 0008C (v01 APPLE Apple00 00000061 01000013)
[ 0.000000] ACPI: FACP 00000000bf968000 000F4 (v04 APPLE Apple00 00000061 Loki 0000005F)
[ 0.000000] ACPI: DSDT 00000000bf95b000 0572C (v01 APPLE MacBookA 00030001 INTL 20061109)
[ 0.000000] ACPI: FACS 00000000bf71e000 00040
[ 0.000000] ACPI: HPET 00000000bf967000 00038 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: APIC 00000000bf966000 00068 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: APIC 00000000bf965000 00068 (v02 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: ASF! 00000000bf963000 000A5 (v32 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SBST 00000000bf962000 00030 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: ECDT 00000000bf961000 00053 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SSDT 00000000bf957000 00024 (v01 APPLE Apple 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bf955000 0008A (v01 APPLE NoSDCard 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bf954000 004DC (v01 APPLE CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: MCFG 00000000bf964000 0003C (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SSDT 00000000bf95a000 000A5 (v01 SataRe SataPri 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bf959000 00074 (v01 SataRe SataSec 00001000 INTL 20061109)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000140000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000140000000
[ 0.000000] NODE_DATA [0000000100000000 - 0000000100004fff]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880100200000-ffff8801039fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00140000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000008f
[ 0.000000] 0: 0x00000090 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000af000
[ 0.000000] 0: 0x000bf000 -> 0x000bf719
[ 0.000000] 0: 0x00100000 -> 0x00140000
[ 0.000000] On node 0 totalpages: 980647
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3926 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 700241 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 258560 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] early_res array is doubled to 64 at [1a000 - 1a7ff]
[ 0.000000] PM: Registered nosave memory: 000000000008f000 - 0000000000090000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000af000000 - 00000000bf000000
[ 0.000000] PM: Registered nosave memory: 00000000bf719000 - 00000000bf939000
[ 0.000000] PM: Registered nosave memory: 00000000bf939000 - 00000000bfef9000
[ 0.000000] PM: Registered nosave memory: 00000000bfef9000 - 00000000bfeff000
[ 0.000000] PM: Registered nosave memory: 00000000bfeff000 - 00000000bff00000
[ 0.000000] PM: Registered nosave memory: 00000000bff00000 - 00000000d3200000
[ 0.000000] PM: Registered nosave memory: 00000000d3200000 - 00000000d3201000
[ 0.000000] PM: Registered nosave memory: 00000000d3201000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffc00000
[ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d3201000 (gap: d3201000:1cdff000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001e00000 s91520 r8192 d23168 u1048576
[ 0.000000] pcpu-alloc: s91520 r8192 d23168 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] early_res array is doubled to 128 at [1a800 - 1b7ff]
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 962727
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: file=/cdrom/preseed/ubuntu.seed priority=low vga=788 initrd=/install/initrd.gz -- BOOT_IMAGE=/install/vmlinuz
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Subtract (61 early reservations)
[ 0.000000] #1 [0001000000 - 0001d17114] TEXT DATA BSS
[ 0.000000] #2 [007f985000 - 007ffff000] RAMDISK
[ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved
[ 0.000000] #4 [0001d18000 - 0001d18219] BRK
[ 0.000000] #5 [0000010000 - 0000012000] TRAMPOLINE
[ 0.000000] #6 [0000012000 - 0000016000] ACPI WAKEUP
[ 0.000000] #7 [0000016000 - 0000019000] PGTABLE
[ 0.000000] #8 [0000019000 - 000001a000] PGTABLE
[ 0.000000] #9 [0100000000 - 0100005000] NODE_DATA
[ 0.000000] #10 [0001d18240 - 0001d19240] BOOTMEM
[ 0.000000] #11 [0001d17140 - 0001d17428] BOOTMEM
[ 0.000000] #12 [0100005000 - 0100006000] BOOTMEM
[ 0.000000] #13 [0100006000 - 0100007000] BOOTMEM
[ 0.000000] #14 [0100200000 - 0103a00000] MEMMAP 0
[ 0.000000] #15 [0001d17440 - 0001d175c0] BOOTMEM
[ 0.000000] #16 [0001d19240 - 0001d31240] BOOTMEM
[ 0.000000] #17 [0001d31240 - 0001d37240] BOOTMEM
[ 0.000000] #18 [0001d38000 - 0001d39000] BOOTMEM
[ 0.000000] #19 [0001d175c0 - 0001d17601] BOOTMEM
[ 0.000000] #20 [0001d17640 - 0001d17683] BOOTMEM
[ 0.000000] #21 [0001d176c0 - 0001d17ae8] BOOTMEM
[ 0.000000] #22 [0001d17b00 - 0001d17b68] BOOTMEM
[ 0.000000] #23 [0001d17b80 - 0001d17be8] BOOTMEM
[ 0.000000] #24 [0001d17c00 - 0001d17c68] BOOTMEM
[ 0.000000] #25 [0001d17c80 - 0001d17ce8] BOOTMEM
[ 0.000000] #26 [0001d17d00 - 0001d17d68] BOOTMEM
[ 0.000000] #27 [0001d17d80 - 0001d17de8] BOOTMEM
[ 0.000000] #28 [0001d17e00 - 0001d17e68] BOOTMEM
[ 0.000000] #29 [0001d17e80 - 0001d17ee8] BOOTMEM
[ 0.000000] #30 [0001d17f00 - 0001d17f68] BOOTMEM
[ 0.000000] #31 [0001d17f80 - 0001d17fe8] BOOTMEM
[ 0.000000] #32 [0001d37240 - 0001d372a8] BOOTMEM
[ 0.000000] #33 [0001d372c0 - 0001d37328] BOOTMEM
[ 0.000000] #34 [0001d37340 - 0001d373a8] BOOTMEM
[ 0.000000] #35 [0001d373c0 - 0001d37428] BOOTMEM
[ 0.000000] #36 [0001d37440 - 0001d374a8] BOOTMEM
[ 0.000000] #37 [0001d374c0 - 0001d37528] BOOTMEM
[ 0.000000] #38 [0001d37540 - 0001d375a8] BOOTMEM
[ 0.000000] #39 [0001d375c0 - 0001d37628] BOOTMEM
[ 0.000000] #40 [0001d37640 - 0001d37660] BOOTMEM
[ 0.000000] #41 [0001d37680 - 0001d376a0] BOOTMEM
[ 0.000000] #42 [0001d376c0 - 0001d376e0] BOOTMEM
[ 0.000000] #43 [0001d37700 - 0001d37720] BOOTMEM
[ 0.000000] #44 [0001d37740 - 0001d377af] BOOTMEM
[ 0.000000] #45 [0001d377c0 - 0001d3782f] BOOTMEM
[ 0.000000] #46 [0001e00000 - 0001e1e000] BOOTMEM
[ 0.000000] #47 [0001f00000 - 0001f1e000] BOOTMEM
[ 0.000000] #48 [0001d37840 - 0001d37848] BOOTMEM
[ 0.000000] #49 [0001d37880 - 0001d37888] BOOTMEM
[ 0.000000] #50 [0001d378c0 - 0001d378c8] BOOTMEM
[ 0.000000] #51 [0001d37900 - 0001d37910] BOOTMEM
[ 0.000000] #52 [0001d37940 - 0001d37a80] BOOTMEM
[ 0.000000] #53 [0001d37a80 - 0001d37ae0] BOOTMEM
[ 0.000000] #54 [0001d37b00 - 0001d37b60] BOOTMEM
[ 0.000000] #55 [0001d39000 - 0001d41000] BOOTMEM
[ 0.000000] #56 [0001d37b80 - 0001d37dc0] BOOTMEM
[ 0.000000] #57 [0001f1e000 - 0005f1e000] BOOTMEM
[ 0.000000] #58 [0001d41000 - 0001d61000] BOOTMEM
[ 0.000000] #59 [0001d61000 - 0001da1000] BOOTMEM
[ 0.000000] #60 [000001b800 - 0000023800] BOOTMEM
[ 0.000000] Memory: 3778776k/5242880k available (5708k kernel code, 1320292k absent, 143812k reserved, 5382k data, 908k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:512
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 40632320 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1596.865 MHz processor.
[ 0.010011] Calibrating delay loop (skipped), value calculated using timer frequency.. 3193.73 BogoMIPS (lpj=15968650)
[ 0.010022] pid_max: default: 32768 minimum: 301
[ 0.010055] Security Framework initialized
[ 0.010082] AppArmor: AppArmor initialized
[ 0.010086] Yama: becoming mindful.
[ 0.010671] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.013308] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.014507] Mount-cache hash table entries: 256
[ 0.014687] Initializing cgroup subsys ns
[ 0.014698] Initializing cgroup subsys cpuacct
[ 0.014705] Initializing cgroup subsys memory
[ 0.014718] Initializing cgroup subsys devices
[ 0.014724] Initializing cgroup subsys freezer
[ 0.014729] Initializing cgroup subsys net_cls
[ 0.014769] CPU: Physical Processor ID: 0
[ 0.014774] CPU: Processor Core ID: 0
[ 0.014779] mce: CPU supports 6 MCE banks
[ 0.014792] CPU0: Thermal monitoring enabled (TM2)
[ 0.014800] using mwait in idle threads.
[ 0.014805] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.014818] ... version: 2
[ 0.014823] ... bit width: 40
[ 0.014827] ... generic registers: 2
[ 0.014831] ... value mask: 000000ffffffffff
[ 0.014836] ... max period: 000000007fffffff
[ 0.014840] ... fixed-purpose events: 3
[ 0.014844] ... event mask: 0000000700000003
[ 0.023134] ACPI: Core revision 20100428
[ 0.034420] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.034430] ftrace: allocating 22680 entries in 89 pages
[ 0.040067] Setting APIC routing to flat
[ 0.040483] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.148406] CPU0: Intel(R) Core(TM)2 Duo CPU U9600 @ 1.60GHz stepping 0a
[ 0.150000] Booting Node 0, Processors #1 Ok.
[ 0.310019] Brought up 2 CPUs
[ 0.310028] Total of 2 processors activated (6387.33 BogoMIPS).
[ 0.310901] devtmpfs: initialized
[ 0.310950] regulator: core version 0.5
[ 0.311017] Time: 21:02:52 Date: 12/02/10
[ 0.311064] NET: Registered protocol family 16
[ 0.311095] Trying to unpack rootfs image as initramfs...
[ 0.311231] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.311239] ACPI: bus type pci registered
[ 0.311563] PCI: MMCONFIG for domain 0000 [bus 00-02] at [mem 0xf0000000-0xf02fffff] (base 0xf0000000)
[ 0.311572] PCI: MMCONFIG at [mem 0xf0000000-0xf02fffff] reserved in E820
[ 0.312481] PCI: Using configuration type 1 for base access
[ 0.320166] bio: create slab <bio-0> at 0
[ 0.322381] ACPI: EC: EC description table is found, configuring boot EC
[ 0.325201] ACPI: BIOS _OSI(Linux) query ignored
[ 0.330024] ACPI: SSDT 00000000bf71dc98 0023D (v01 APPLE Cpu0Ist 00003000 INTL 20061109)
[ 0.330604] ACPI: Dynamic OEM Table Load:
[ 0.330612] ACPI: SSDT (null) 0023D (v01 APPLE Cpu0Ist 00003000 INTL 20061109)
[ 0.330979] ACPI: SSDT 00000000bf71c618 005A6 (v01 APPLE Cpu0Cst 00003001 INTL 20061109)
[ 0.331536] ACPI: Dynamic OEM Table Load:
[ 0.331542] ACPI: SSDT (null) 005A6 (v01 APPLE Cpu0Cst 00003001 INTL 20061109)
[ 0.332067] ACPI: SSDT 00000000bf71df18 000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109)
[ 0.332632] ACPI: Dynamic OEM Table Load:
[ 0.332639] ACPI: SSDT (null) 000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109)
[ 0.332826] ACPI: SSDT 00000000bf71bf18 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109)
[ 0.333380] ACPI: Dynamic OEM Table Load:
[ 0.333387] ACPI: SSDT (null) 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109)
[ 0.333526] ACPI: Interpreter enabled
[ 0.333532] ACPI: (supports S0 S3 S4 S5)
[ 0.333563] ACPI: Using IOAPIC for interrupt routing
[ 0.351029] ACPI: EC: GPE = 0x57, I/O: command/status = 0x66, data = 0x62
[ 0.351029] ACPI: No dock devices found.
[ 0.351029] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.351192] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.351485] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.351493] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.351499] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.351506] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff]
[ 0.351512] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff]
[ 0.351519] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff]
[ 0.351526] pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff]
[ 0.351532] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.351539] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.351546] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.351553] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 0.351559] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[ 0.351566] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[ 0.351573] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff]
[ 0.351580] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff]
[ 0.351587] pci_root PNP0A08:00: host bridge window [mem 0x000f0000-0x000fffff]
[ 0.351594] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
[ 0.352566] pci 0000:00:03.0: reg 10: [io 0x2100-0x21ff]
[ 0.352682] pci 0000:00:03.2: reg 10: [io 0x0000-0x00ff]
[ 0.352699] pci 0000:00:03.2: reg 20: [io 0x2240-0x227f]
[ 0.352706] pci 0000:00:03.2: reg 24: [io 0x2200-0x223f]
[ 0.352733] pci 0000:00:03.2: PME# supported from D3hot D3cold
[ 0.352740] pci 0000:00:03.2: PME# disabled
[ 0.352924] pci 0000:00:03.4: reg 10: [mem 0xd3200000-0xd327ffff]
[ 0.353035] pci 0000:00:04.0: reg 10: [mem 0xd328a000-0xd328afff]
[ 0.353073] pci 0000:00:04.0: supports D1 D2
[ 0.353076] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.353081] pci 0000:00:04.0: PME# disabled
[ 0.353111] pci 0000:00:04.1: reg 10: [mem 0xd328b100-0xd328b1ff]
[ 0.353156] pci 0000:00:04.1: supports D1 D2
[ 0.353159] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.353164] pci 0000:00:04.1: PME# disabled
[ 0.353202] pci 0000:00:06.0: reg 10: [mem 0xd3289000-0xd3289fff]
[ 0.353246] pci 0000:00:06.0: supports D1 D2
[ 0.353249] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.353254] pci 0000:00:06.0: PME# disabled
[ 0.353284] pci 0000:00:06.1: reg 10: [mem 0xd328b000-0xd328b0ff]
[ 0.353331] pci 0000:00:06.1: supports D1 D2
[ 0.353334] pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.353339] pci 0000:00:06.1: PME# disabled
[ 0.353388] pci 0000:00:08.0: reg 10: [mem 0xd3280000-0xd3283fff]
[ 0.353436] pci 0000:00:08.0: PME# supported from D3hot D3cold
[ 0.353440] pci 0000:00:08.0: PME# disabled
[ 0.353476] pci 0000:00:0a.0: reg 10: [io 0x2298-0x229f]
[ 0.353483] pci 0000:00:0a.0: reg 14: [io 0x22a4-0x22a7]
[ 0.353489] pci 0000:00:0a.0: reg 18: [io 0x2290-0x2297]
[ 0.353495] pci 0000:00:0a.0: reg 1c: [io 0x22a0-0x22a3]
[ 0.353500] pci 0000:00:0a.0: reg 20: [io 0x2280-0x228f]
[ 0.353506] pci 0000:00:0a.0: reg 24: [mem 0xd3284000-0xd3285fff]
[ 0.353561] pci 0000:00:0b.0: reg 10: [mem 0xd3288000-0xd3288fff]
[ 0.353863] pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.353873] pci 0000:00:15.0: PME# disabled
[ 0.353970] pci 0000:00:17.0: PME# supported from D0 D3hot D3cold
[ 0.353974] pci 0000:00:17.0: PME# disabled
[ 0.354268] pci 0000:01:00.0: reg 10: [mem 0xd3100000-0xd3103fff 64bit]
[ 0.354339] pci 0000:01:00.0: supports D1 D2
[ 0.354341] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.354347] pci 0000:01:00.0: PME# disabled
[ 0.354375] pci 0000:00:15.0: PCI bridge to [bus 01-01]
[ 0.354396] pci 0000:00:15.0: bridge window [io 0xfffffffffffff000-0x0000] (disabled)
[ 0.354407] pci 0000:00:15.0: bridge window [mem 0xd3100000-0xd31fffff]
[ 0.354424] pci 0000:00:15.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.354480] pci 0000:02:00.0: reg 10: [mem 0xd2000000-0xd2ffffff]
[ 0.354489] pci 0000:02:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.354499] pci 0000:02:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.354505] pci 0000:02:00.0: reg 24: [io 0x1000-0x107f]
[ 0.354511] pci 0000:02:00.0: reg 30: [mem 0xd3000000-0xd301ffff pref]
[ 0.354565] pci 0000:00:17.0: PCI bridge to [bus 02-02]
[ 0.354573] pci 0000:00:17.0: bridge window [io 0x1000-0x1fff]
[ 0.354577] pci 0000:00:17.0: bridge window [mem 0xd2000000-0xd30fffff]
[ 0.354583] pci 0000:00:17.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.354609] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.354983] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT]
[ 0.402735] ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.403048] ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.403354] ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.403659] ACPI: PCI Interrupt Link [LNK4] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.403963] ACPI: PCI Interrupt Link [Z00J] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.404271] ACPI: PCI Interrupt Link [Z00K] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.404576] ACPI: PCI Interrupt Link [Z00L] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.404879] ACPI: PCI Interrupt Link [Z00M] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.405185] ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21 22 23) *15
[ 0.405488] ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 19 20 21 22 23) *11
[ 0.405791] ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 19 20 21 22 23) *10
[ 0.406094] ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.406399] ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 20 21 22 23) *15
[ 0.406702] ACPI: PCI Interrupt Link [LGPU] (IRQs 16 17 18 19 20 21 22 23) *11
[ 0.407004] ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.407307] ACPI: PCI Interrupt Link [LSI0] (IRQs 16 17 18 19 20 21 22 23) *11
[ 0.407611] ACPI: PCI Interrupt Link [Z000] (IRQs 16 17 18 19 20 21 22 23) *7
[ 0.407914] ACPI: PCI Interrupt Link [Z001] (IRQs 16 17 18 19 20 21 22 23) *5
[ 0.408217] ACPI: PCI Interrupt Link [LPMU] (IRQs 16 17 18 19 20 21 22 23) *14
[ 0.408311] HEST: Table is not found!
[ 0.408437] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.408445] vgaarb: loaded
[ 0.408633] SCSI subsystem initialized
[ 0.420089] libata version 3.00 loaded.
[ 0.420089] usbcore: registered new interface driver usbfs
[ 0.420097] usbcore: registered new interface driver hub
[ 0.420137] usbcore: registered new device driver usb
[ 0.420336] ACPI: WMI: Mapper loaded
[ 0.420342] PCI: Using ACPI for IRQ routing
[ 0.420348] PCI: pci_cache_line_size set to 64 bytes
[ 0.420559] reserve RAM buffer: 000000000008f000 - 000000000008ffff
[ 0.420563] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.420566] reserve RAM buffer: 00000000af000000 - 00000000afffffff
[ 0.420569] reserve RAM buffer: 00000000bf719000 - 00000000bfffffff
[ 0.420689] NetLabel: Initializing
[ 0.420694] NetLabel: domain hash size = 128
[ 0.420697] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.420716] NetLabel: unlabeled traffic allowed by default
[ 0.420771] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.420783] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
[ 0.420792] hpet0: 4 comparators, 64-bit 25.000000 MHz counter
[ 0.440043] Switching to clocksource tsc
[ 0.452663] AppArmor: AppArmor Filesystem Enabled
[ 0.452692] pnp: PnP ACPI init
[ 0.452719] ACPI: bus type pnp registered
[ 0.454347] pnp 00:06: disabling [io 0x0010-0x001f] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
[ 0.454358] pnp 00:06: disabling [io 0x0022-0x003f] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
[ 0.454366] pnp 00:06: disabling [io 0x0044-0x005f] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
[ 0.454375] pnp 00:06: disabling [io 0x0063] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
[ 0.454383] pnp 00:06: disabling [io 0x0065] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
[ 0.454391] pnp 00:06: disabling [io 0x0067-0x006f] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
[ 0.454399] pnp 00:06: disabling [io 0x0072-0x0073] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
[ 0.454408] pnp 00:06: disabling [io 0x0074-0x007f] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
[ 0.454416] pnp 00:06: disabling [io 0x0091-0x0093] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
[ 0.454425] pnp 00:06: disabling [io 0x0097-0x009f] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
[ 0.454433] pnp 00:06: disabling [io 0x00a2-0x00bf] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
[ 0.454442] pnp 00:06: disabling [io 0x00e0-0x00ef] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
[ 0.454450] pnp 00:06: disabling [io 0x0080] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
[ 0.460303] pnp: PnP ACPI: found 8 devices
[ 0.460309] ACPI: ACPI bus type pnp unregistered
[ 0.460330] system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.460343] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.460354] system 00:06: [io 0x0400-0x047f] has been reserved
[ 0.460360] system 00:06: [io 0x0480-0x04ff] has been reserved
[ 0.460366] system 00:06: [io 0x0500-0x057f] has been reserved
[ 0.460372] system 00:06: [io 0x0580-0x05ff] has been reserved
[ 0.460378] system 00:06: [io 0x0800-0x087f] has been reserved
[ 0.460384] system 00:06: [io 0x0880-0x08ff] has been reserved
[ 0.460390] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.460396] system 00:06: [io 0x0295-0x0296] has been reserved
[ 0.466810] pci 0000:00:03.2: BAR 0: assigned [io 0x2000-0x20ff]
[ 0.466822] pci 0000:00:03.2: BAR 0: set to [io 0x2000-0x20ff] (PCI address [0x2000-0x20ff]
[ 0.466830] pci 0000:00:15.0: PCI bridge to [bus 01-01]
[ 0.466835] pci 0000:00:15.0: bridge window [io disabled]
[ 0.466851] pci 0000:00:15.0: bridge window [mem 0xd3100000-0xd31fffff]
[ 0.466862] pci 0000:00:15.0: bridge window [mem pref disabled]
[ 0.466881] pci 0000:00:17.0: PCI bridge to [bus 02-02]
[ 0.466887] pci 0000:00:17.0: bridge window [io 0x1000-0x1fff]
[ 0.466894] pci 0000:00:17.0: bridge window [mem 0xd2000000-0xd30fffff]
[ 0.466902] pci 0000:00:17.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.467023] pci 0000:00:15.0: power state changed by ACPI to D0
[ 0.467133] pci 0000:00:15.0: power state changed by ACPI to D0
[ 0.467577] ACPI: PCI Interrupt Link [Z00J] enabled at IRQ 23
[ 0.467585] alloc irq_desc for 23 on node -1
[ 0.467588] alloc kstat_irqs on node -1
[ 0.467598] pci 0000:00:15.0: PCI INT A -> Link[Z00J] -> GSI 23 (level, low) -> IRQ 23
[ 0.467613] pci 0000:00:15.0: setting latency timer to 64
[ 0.467625] pci 0000:00:17.0: setting latency timer to 64
[ 0.467629] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.467633] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.467636] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.467639] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.467641] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.467644] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.467647] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[ 0.467650] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[ 0.467653] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[ 0.467656] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[ 0.467659] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[ 0.467662] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
[ 0.467665] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
[ 0.467667] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
[ 0.467670] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
[ 0.467673] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
[ 0.467676] pci_bus 0000:00: resource 20 [mem 0xc0000000-0xfebfffff]
[ 0.467679] pci_bus 0000:01: resource 1 [mem 0xd3100000-0xd31fffff]
[ 0.467683] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.467685] pci_bus 0000:02: resource 1 [mem 0xd2000000-0xd30fffff]
[ 0.467688] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.467738] NET: Registered protocol family 2
[ 0.467938] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.469563] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.474670] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.475300] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.475307] TCP reno registered
[ 0.475324] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.475393] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.475560] NET: Registered protocol family 1
[ 0.490079] pci 0000:02:00.0: Boot video device
[ 0.490084] PCI: CLS 256 bytes, default 64
[ 0.490088] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.490096] Placing 64MB software IO TLB between ffff880001f1e000 - ffff880005f1e000
[ 0.490103] software IO TLB at phys 0x1f1e000 - 0x5f1e000
[ 0.490383] Scanning for low memory corruption every 60 seconds
[ 0.490586] audit: initializing netlink socket (disabled)
[ 0.490603] type=2000 audit(1291323772.479:1): initialized
[ 0.509668] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.511542] VFS: Disk quotas dquot_6.5.2
[ 0.511619] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.512329] fuse init (API version 7.14)
[ 0.512439] msgmni has been set to 7380
[ 0.517125] Freeing initrd memory: 6632k freed
[ 0.519989] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.520015] io scheduler noop registered
[ 0.520019] io scheduler deadline registered
[ 0.520075] io scheduler cfq registered (default)
[ 0.520322] pcieport 0000:00:15.0: setting latency timer to 64
[ 0.520475] alloc irq_desc for 40 on node -1
[ 0.520478] alloc kstat_irqs on node -1
[ 0.520513] pcieport 0000:00:15.0: irq 40 for MSI/MSI-X
[ 0.520739] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.520772] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.521573] vesafb: framebuffer at 0xd1000000, mapped to 0xffffc90001400000, using 1875k, total 14336k
[ 0.521581] vesafb: mode is 800x600x16, linelength=1600, pages=2
[ 0.521587] vesafb: scrolling: redraw
[ 0.521592] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 0.531484] Console: switching to colour frame buffer device 100x37
[ 0.541364] fb0: VESA VGA frame buffer device
[ 0.541525] intel_idle: MWAIT substates: 0x3122220
[ 0.541528] intel_idle: does not run on family 6 model 23
[ 0.541698] ACPI: AC Adapter [ADP1] (on-line)
[ 0.541964] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.542276] ACPI: Lid Switch [LID0]
[ 0.542440] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.542699] ACPI: Power Button [PWRB]
[ 0.542861] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 0.543119] ACPI: Sleep Button [SLPB]
[ 0.543303] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.543532] ACPI: Power Button [PWRF]
[ 0.544132] ACPI: acpi_idle registered with cpuidle
[ 0.544388] Monitor-Mwait will be used to enter C-1 state
[ 0.544417] Monitor-Mwait will be used to enter C-2 state
[ 0.544442] Monitor-Mwait will be used to enter C-3 state
[ 0.544449] Marking TSC unstable due to TSC halts in idle
[ 0.544669] Switching to clocksource hpet
[ 0.555772] ERST: Table is not found!
[ 0.558994] Linux agpgart interface v0.103
[ 0.561896] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.567212] brd: module loaded
[ 0.570822] loop: module loaded
[ 0.574315] pata_acpi 0000:00:0a.0: power state changed by ACPI to D0
[ 0.577677] pata_acpi 0000:00:0a.0: power state changed by ACPI to D0
[ 0.581371] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 22
[ 0.584795] alloc irq_desc for 22 on node -1
[ 0.584798] alloc kstat_irqs on node -1
[ 0.584807] pata_acpi 0000:00:0a.0: PCI INT A -> Link[LSI0] -> GSI 22 (level, low) -> IRQ 22
[ 0.588510] pata_acpi 0000:00:0a.0: setting latency timer to 64
[ 0.588524] pata_acpi 0000:00:0a.0: PCI INT A disabled
[ 0.592338] ata_generic 0000:00:0a.0: power state changed by ACPI to D0
[ 0.596328] ata_generic 0000:00:0a.0: power state changed by ACPI to D0
[ 0.600207] ata_generic 0000:00:0a.0: PCI INT A -> Link[LSI0] -> GSI 22 (level, low) -> IRQ 22
[ 0.604329] ata_generic 0000:00:0a.0: setting latency timer to 64
[ 0.604406] scsi0 : ata_generic
[ 0.608912] scsi1 : ata_generic
[ 0.613411] ata1: PATA max UDMA/100 cmd 0x2298 ctl 0x22a4 bmdma 0x2280 irq 22
[ 0.617810] ata2: PATA max UDMA/100 cmd 0x2290 ctl 0x22a0 bmdma 0x2288 irq 22
[ 0.622623] Fixed MDIO Bus: probed
[ 0.627135] PPP generic driver version 2.4.2
[ 0.631752] tun: Universal TUN/TAP device driver, 1.6
[ 0.636479] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.641456] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.646654] ehci_hcd 0000:00:04.1: power state changed by ACPI to D0
[ 0.651946] ehci_hcd 0000:00:04.1: power state changed by ACPI to D0
[ 0.657432] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 21
[ 0.662463] alloc irq_desc for 21 on node -1
[ 0.662466] alloc kstat_irqs on node -1
[ 0.662472] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUS2] -> GSI 21 (level, low) -> IRQ 21
[ 0.667707] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 0.667711] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 0.672810] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
[ 0.677859] ehci_hcd 0000:00:04.1: debug port 1
[ 0.712515] ehci_hcd 0000:00:04.1: cache line size of 256 is not supported
[ 0.712533] ehci_hcd 0000:00:04.1: irq 21, io mem 0xd328b100
[ 0.732524] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.10
[ 0.737244] hub 1-0:1.0: USB hub found
[ 0.741682] hub 1-0:1.0: 6 ports detected
[ 0.746209] ehci_hcd 0000:00:06.1: power state changed by ACPI to D0
[ 0.750659] ehci_hcd 0000:00:06.1: power state changed by ACPI to D0
[ 0.755341] ACPI: PCI Interrupt Link [Z001] enabled at IRQ 20
[ 0.759600] alloc irq_desc for 20 on node -1
[ 0.759603] alloc kstat_irqs on node -1
[ 0.759609] ehci_hcd 0000:00:06.1: PCI INT B -> Link[Z001] -> GSI 20 (level, low) -> IRQ 20
[ 0.762000] ACPI: Battery Slot [BAT0] (battery present)
[ 0.768542] ehci_hcd 0000:00:06.1: setting latency timer to 64
[ 0.768546] ehci_hcd 0000:00:06.1: EHCI Host Controller
[ 0.773042] ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2
[ 0.777544] ehci_hcd 0000:00:06.1: debug port 1
[ 0.800198] ata1.00: ATA-8: APPLE SSD TS128C, CJAA0201, max UDMA/100
[ 0.802516] ehci_hcd 0000:00:06.1: cache line size of 256 is not supported
[ 0.802533] ehci_hcd 0000:00:06.1: irq 20, io mem 0xd328b000
[ 0.809333] ata1.00: 236978176 sectors, multi 16: LBA48
[ 0.813950] ata1.00: configured for UDMA/100
[ 0.818546] scsi 0:0:0:0: Direct-Access ATA APPLE SSD TS128C CJAA PQ: 0 ANSI: 5
[ 0.823194] ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.10
[ 0.823315] sd 0:0:0:0: [sda] 236978176 512-byte logical blocks: (121 GB/113 GiB)
[ 0.823384] sd 0:0:0:0: [sda] Write Protect is off
[ 0.823387] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.823417] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.846996] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.847049] hub 2-0:1.0: USB hub found
[ 0.847054] hub 2-0:1.0: 6 ports detected
[ 0.847139] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.847266] ohci_hcd 0000:00:04.0: power state changed by ACPI to D0
[ 0.847374] ohci_hcd 0000:00:04.0: power state changed by ACPI to D0
[ 0.847799] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 19
[ 0.847803] alloc irq_desc for 19 on node -1
[ 0.847805] alloc kstat_irqs on node -1
[ 0.847811] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUS0] -> GSI 19 (level, low) -> IRQ 19
[ 0.847826] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 0.847830] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 0.847873] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3
[ 0.847901] ohci_hcd 0000:00:04.0: irq 19, io mem 0xd328a000
[ 0.848035] sda: sda1 sda2 sda3 sda4 sda5
[ 0.905900] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.912851] hub 3-0:1.0: USB hub found
[ 0.917620] hub 3-0:1.0: 6 ports detected
[ 0.922579] ohci_hcd 0000:00:06.0: power state changed by ACPI to D0
[ 0.927582] ohci_hcd 0000:00:06.0: power state changed by ACPI to D0
[ 0.932804] ACPI: PCI Interrupt Link [Z000] enabled at IRQ 18
[ 0.937665] alloc irq_desc for 18 on node -1
[ 0.937667] alloc kstat_irqs on node -1
[ 0.937674] ohci_hcd 0000:00:06.0: PCI INT A -> Link[Z000] -> GSI 18 (level, low) -> IRQ 18
[ 0.942699] ohci_hcd 0000:00:06.0: setting latency timer to 64
[ 0.942703] ohci_hcd 0000:00:06.0: OHCI Host Controller
[ 0.947765] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4
[ 0.952853] ohci_hcd 0000:00:06.0: irq 18, io mem 0xd3289000
[ 1.012153] hub 4-0:1.0: USB hub found
[ 1.016961] hub 4-0:1.0: 6 ports detected
[ 1.021763] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.026738] PNP: No PS/2 controller found. Probing ports directly.
[ 1.032461] i8042.c: No controller found.
[ 1.037318] mice: PS/2 mouse device common for all mice
[ 1.042285] rtc_cmos 00:07: RTC can wake from S4
[ 1.047122] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 1.051977] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 1.056905] device-mapper: uevent: version 1.0.3
[ 1.061714] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 1.066625] device-mapper: multipath: version 1.1.1 loaded
[ 1.071432] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 1.073061] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.073346] cpuidle: using governor ladder
[ 1.085917] cpuidle: using governor menu
[ 1.090899] TCP cubic registered
[ 1.095719] NET: Registered protocol family 10
[ 1.100757] lo: Disabled Privacy Extensions
[ 1.105608] NET: Registered protocol family 17
[ 1.111328] PM: Resume from disk failed.
[ 1.111348] registered taskstats version 1
[ 1.116375] Magic number: 6:376:44
[ 1.121030] rtc_cmos 00:07: setting system clock to 2010-12-02 21:02:53 UTC (1291323773)
[ 1.125750] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.130474] EDD information not available.
[ 1.135292] Freeing unused kernel memory: 908k freed
[ 1.140374] Write protecting the kernel read-only data: 10240k
[ 1.145585] Freeing unused kernel memory: 416k freed
[ 1.150724] Freeing unused kernel memory: 1644k freed
[ 1.412140] Initializing USB Mass Storage driver...
[ 1.417097] scsi2 : usb-storage 1-1:1.0
[ 1.423594] usbcore: registered new interface driver usb-storage
[ 1.428568] USB Mass Storage support registered.
[ 1.602547] usb 1-6: new high speed USB device using ehci_hcd and address 5
[ 2.200083] usb 3-3: new full speed USB device using ohci_hcd and address 2
[ 2.432467] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRW GX30N RP09 PQ: 0 ANSI: 0
[ 2.440316] sr0: scsi3-mmc drive: 10x/24x writer cd/rw xa/form2 cdda tray
[ 2.440320] Uniform CD-ROM driver Revision: 3.20
[ 2.440447] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.440513] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 2.463082] usbcore: registered new interface driver hiddev
[ 2.471503] input: Apple Inc. Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.0/input/input4
[ 2.471610] generic-usb 0003:05AC:0243.0001: input,hidraw0: USB HID v1.11 Keyboard [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:04.0-3/input0
[ 2.480833] generic-usb 0003:05AC:0243.0002: hidraw1: USB HID v1.11 Device [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:04.0-3/input1
[ 2.488053] input: Apple Inc. Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.2/input/input5
[ 2.488157] generic-usb 0003:05AC:0243.0003: input,hidraw2: USB HID v1.11 Mouse [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:04.0-3/input2
[ 2.488178] usbcore: registered new interface driver usbhid
[ 2.488180] usbhid: USB HID core driver
[ 2.782593] usb 3-5: new full speed USB device using ohci_hcd and address 3
[ 3.018841] hub 3-5:1.0: USB hub found
[ 3.021762] hub 3-5:1.0: 3 ports detected
[ 3.152621] usb 2-2: new high speed USB device using ehci_hcd and address 2
[ 3.401783] usb 3-5.1: new full speed USB device using ohci_hcd and address 4
[ 3.538110] input: HID 05ac:820a as /devices/pci0000:00/0000:00:04.0/usb3/3-5/3-5.1/3-5.1:1.0/input/input6
[ 3.538223] generic-usb 0003:05AC:820A.0004: input,hidraw3: USB HID v1.11 Keyboard [HID 05ac:820a] on usb-0000:00:04.0-5.1/input0
[ 3.623786] usb 3-5.2: new full speed USB device using ohci_hcd and address 5
[ 3.757093] input: HID 05ac:820b as /devices/pci0000:00/0000:00:04.0/usb3/3-5/3-5.2/3-5.2:1.0/input/input7
[ 3.757203] generic-usb 0003:05AC:820B.0005: input,hidraw4: USB HID v1.11 Mouse [HID 05ac:820b] on usb-0000:00:04.0-5.2/input0
[ 3.841784] usb 3-5.3: new full speed USB device using ohci_hcd and address 6
Reply to: