Bug#605275: EeePC 1005HAG freezes briefly after resuming
> Please provide a kernel log from after wakeup ('dmesg' command) and a
> list of the USB devices ('lsusb' command).
Attached.
Linux errai 2.6.36-trunk-686-bigmem #1 SMP Thu Oct 28 14:50:48 UTC 2010 i686 GNU/Linux
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.36-trunk-686-bigmem (Debian 2.6.36-1~experimental.1) (max@stro.at) (gcc version 4.4.5 20100902 (prerelease) (Debian 4.4.4-13) ) #1 SMP Thu Oct 28 14:50:48 UTC 2010
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e2000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f7a0000 (usable)
[ 0.000000] BIOS-e820: 000000003f7a0000 - 000000003f7ae000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003f7ae000 - 000000003f7f0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f7f0000 - 000000003f800000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x3f7a0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 0C0000000 write-back
[ 0.000000] 1 base 03F800000 mask 0FF800000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01a00000
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037800000 page 2M
[ 0.000000] 0037800000 - 00379fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 379fe000 @ 15000-1b000
[ 0.000000] RAMDISK: 2f08c000 - 2f9f8000
[ 0.000000] ACPI: RSDP 000fb9e0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 3f7a0000 0003C (v01 A_M_I_ OEMRSDT 12000931 MSFT 00000097)
[ 0.000000] ACPI: FACP 3f7a0200 00084 (v02 A_M_I_ OEMFACP 12000931 MSFT 00000097)
[ 0.000000] ACPI: DSDT 3f7a0430 08072 (v01 A1397 A1397000 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 3f7ae000 00040
[ 0.000000] ACPI: APIC 3f7a0390 0005C (v01 A_M_I_ OEMAPIC 12000931 MSFT 00000097)
[ 0.000000] ACPI: MCFG 3f7a03f0 0003C (v01 A_M_I_ OEMMCFG 12000931 MSFT 00000097)
[ 0.000000] ACPI: OEMB 3f7ae040 00061 (v01 A_M_I_ AMI_OEM 12000931 MSFT 00000097)
[ 0.000000] ACPI: HPET 3f7a84b0 00038 (v01 A_M_I_ OEMHPET 12000931 MSFT 00000097)
[ 0.000000] ACPI: SSDT 3f7aeb40 004F0 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 125MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] node 0 low ram: 00000000 - 379fe000
[ 0.000000] node 0 bootmap 00018000 - 0001ef40
[ 0.000000] (13/32 early reservations) ==> bootmem [0000000000 - 00379fe000]
[ 0.000000] #0 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #1 [0001000000 - 000152e570] TEXT DATA BSS ==> [0001000000 - 000152e570]
[ 0.000000] #2 [002f08c000 - 002f9f8000] RAMDISK ==> [002f08c000 - 002f9f8000]
[ 0.000000] #3 [000152f000 - 000153c1e0] BRK ==> [000152f000 - 000153c1e0]
[ 0.000000] #4 [00000ff790 - 0000100000] BIOS reserved ==> [00000ff790 - 0000100000]
[ 0.000000] #5 [00000ff780 - 00000ff790] MP-table mpf ==> [00000ff780 - 00000ff790]
[ 0.000000] #6 [000009fc00 - 00000f1170] BIOS reserved ==> [000009fc00 - 00000f1170]
[ 0.000000] #7 [00000f12a8 - 00000ff780] BIOS reserved ==> [00000f12a8 - 00000ff780]
[ 0.000000] #8 [00000f1170 - 00000f12a8] MP-table mpc ==> [00000f1170 - 00000f12a8]
[ 0.000000] #9 [0000010000 - 0000011000] TRAMPOLINE ==> [0000010000 - 0000011000]
[ 0.000000] #10 [0000011000 - 0000015000] ACPI WAKEUP ==> [0000011000 - 0000015000]
[ 0.000000] #11 [0000015000 - 0000018000] PGTABLE ==> [0000015000 - 0000018000]
[ 0.000000] #12 [0000018000 - 000001f000] BOOTMAP ==> [0000018000 - 000001f000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000379fe
[ 0.000000] HighMem 0x000379fe -> 0x0003f7a0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003f7a0
[ 0.000000] On node 0 totalpages: 259887
[ 0.000000] free_area_init_node: node 0, pgdat c13f5080, node_mem_map c153e200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1748 pages used for memmap
[ 0.000000] Normal zone: 221994 pages, LIFO batch:31
[ 0.000000] HighMem zone: 252 pages used for memmap
[ 0.000000] HighMem zone: 31910 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000
[ 0.000000] PM: Registered nosave memory: 00000000000e2000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 3f800000 (gap: 3f800000:bf600000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c1e00000 s34816 r0 d22528 u1048576
[ 0.000000] pcpu-alloc: s34816 r0 d22528 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257855
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.36-trunk-686-bigmem root=/dev/mapper/croot ro elevator=deadline acpi_osi="Linux" quiet
[ 0.000000] ACPI: Added _OSI(Linux)
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000379fe:0003f7a0)
[ 0.000000] Memory: 1015448k/1040000k available (2652k kernel code, 24100k reserved, 1433k data, 404k init, 128648k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
[ 0.000000] .init : 0xc13fe000 - 0xc1463000 ( 404 kB)
[ 0.000000] .data : 0xc12972ea - 0xc13fda60 (1433 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12972ea (2652 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1666.139 MHz processor.
[ 0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 3332.27 BogoMIPS (lpj=6664556)
[ 0.004019] pid_max: default: 32768 minimum: 301
[ 0.004056] Security Framework initialized
[ 0.004064] SELinux: Disabled at boot.
[ 0.004081] Mount-cache hash table entries: 512
[ 0.004305] Initializing cgroup subsys ns
[ 0.004312] Initializing cgroup subsys cpuacct
[ 0.004321] Initializing cgroup subsys devices
[ 0.004326] Initializing cgroup subsys freezer
[ 0.004331] Initializing cgroup subsys net_cls
[ 0.004336] Initializing cgroup subsys blkio
[ 0.004393] CPU: Physical Processor ID: 0
[ 0.004397] CPU: Processor Core ID: 0
[ 0.004402] mce: CPU supports 5 MCE banks
[ 0.004417] CPU0: Thermal monitoring enabled (TM2)
[ 0.004423] using mwait in idle threads.
[ 0.004434] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
[ 0.004446] ... version: 3
[ 0.004450] ... bit width: 40
[ 0.004453] ... generic registers: 2
[ 0.004457] ... value mask: 000000ffffffffff
[ 0.004461] ... max period: 000000007fffffff
[ 0.004465] ... fixed-purpose events: 3
[ 0.004469] ... event mask: 0000000700000003
[ 0.008842] ACPI: Core revision 20100702
[ 0.024097] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.024568] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.069235] CPU0: Intel(R) Atom(TM) CPU N280 @ 1.66GHz stepping 02
[ 0.072000] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.072000] Booting Node 0, Processors #1 Ok.
[ 0.008000] Initializing CPU#1
[ 0.160047] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.160120] Brought up 2 CPUs
[ 0.160127] Total of 2 processors activated (6665.17 BogoMIPS).
[ 0.160462] devtmpfs: initialized
[ 0.160462] regulator: core version 0.5
[ 0.160462] NET: Registered protocol family 16
[ 0.160462] ACPI: bus type pci registered
[ 0.160497] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.160503] PCI: not using MMCONFIG
[ 0.160800] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 0.160804] PCI: Using configuration type 1 for base access
[ 0.161556] bio: create slab <bio-0> at 0
[ 0.165766] ACPI: EC: Look up EC in DSDT
[ 0.168607] ACPI: BIOS _OSI(Linux) query honored via cmdline
[ 0.168769] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.176893] ACPI: SSDT 3f7ae180 001FA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.177543] ACPI: Dynamic OEM Table Load:
[ 0.177550] ACPI: SSDT (null) 001FA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.178131] ACPI: SSDT 3f7ae410 00724 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.180025] ACPI: Dynamic OEM Table Load:
[ 0.180031] ACPI: SSDT (null) 00724 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.180711] ACPI: SSDT 3f7ae0b0 000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 0.181341] ACPI: Dynamic OEM Table Load:
[ 0.181347] ACPI: SSDT (null) 000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 0.181603] ACPI: SSDT 3f7ae380 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 0.182212] ACPI: Dynamic OEM Table Load:
[ 0.182219] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 0.182860] ACPI: Interpreter enabled
[ 0.182869] ACPI: (supports S0 S3 S4 S5)
[ 0.182913] ACPI: Using IOAPIC for interrupt routing
[ 0.182978] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.184210] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
[ 0.184216] PCI: Using MMCONFIG for extended config space
[ 0.195413] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.195831] ACPI: No dock devices found.
[ 0.195840] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.196062] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.196472] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.196480] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.196488] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.196494] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.196501] pci_root PNP0A08:00: host bridge window [mem 0x3f800000-0xffffffff]
[ 0.196588] pci 0000:00:02.0: reg 10: [mem 0xf7e00000-0xf7e7ffff]
[ 0.196598] pci 0000:00:02.0: reg 14: [io 0xdc00-0xdc07]
[ 0.196609] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
[ 0.196619] pci 0000:00:02.0: reg 1c: [mem 0xf7dc0000-0xf7dfffff]
[ 0.196674] pci 0000:00:02.1: reg 10: [mem 0xf7e80000-0xf7efffff]
[ 0.196810] pci 0000:00:1b.0: reg 10: [mem 0xf7db8000-0xf7dbbfff 64bit]
[ 0.196905] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.196914] pci 0000:00:1b.0: PME# disabled
[ 0.197043] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.197052] pci 0000:00:1c.0: PME# disabled
[ 0.197183] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.197191] pci 0000:00:1c.1: PME# disabled
[ 0.197325] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.197333] pci 0000:00:1c.3: PME# disabled
[ 0.197435] pci 0000:00:1d.0: reg 20: [io 0xd400-0xd41f]
[ 0.197547] pci 0000:00:1d.1: reg 20: [io 0xd480-0xd49f]
[ 0.197658] pci 0000:00:1d.2: reg 20: [io 0xd800-0xd81f]
[ 0.197769] pci 0000:00:1d.3: reg 20: [io 0xd880-0xd89f]
[ 0.197858] pci 0000:00:1d.7: reg 10: [mem 0xf7db7c00-0xf7db7fff]
[ 0.197959] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.197967] pci 0000:00:1d.7: PME# disabled
[ 0.198200] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.198209] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[ 0.198218] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0380 (mask 0003)
[ 0.198226] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 0007)
[ 0.198234] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0007)
[ 0.198324] pci 0000:00:1f.2: reg 10: [io 0xd080-0xd087]
[ 0.198340] pci 0000:00:1f.2: reg 14: [io 0xd000-0xd003]
[ 0.198356] pci 0000:00:1f.2: reg 18: [io 0xcc00-0xcc07]
[ 0.198373] pci 0000:00:1f.2: reg 1c: [io 0xc880-0xc883]
[ 0.198389] pci 0000:00:1f.2: reg 20: [io 0xc800-0xc80f]
[ 0.198405] pci 0000:00:1f.2: reg 24: [mem 0xf7db7800-0xf7db7bff]
[ 0.198454] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.198462] pci 0000:00:1f.2: PME# disabled
[ 0.198551] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
[ 0.198560] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.198570] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.198582] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.198710] pci 0000:02:00.0: reg 10: [mem 0xfbff0000-0xfbffffff 64bit]
[ 0.198833] pci 0000:02:00.0: supports D1
[ 0.198838] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.198847] pci 0000:02:00.0: PME# disabled
[ 0.204030] pci 0000:00:1c.1: PCI bridge to [bus 02-03]
[ 0.204039] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
[ 0.204048] pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.204061] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf6ffffff 64bit pref]
[ 0.204192] pci 0000:01:00.0: reg 10: [mem 0xf7fc0000-0xf7ffffff 64bit]
[ 0.204214] pci 0000:01:00.0: reg 18: [io 0xec00-0xec7f]
[ 0.204329] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.204338] pci 0000:01:00.0: PME# disabled
[ 0.212027] pci 0000:00:1c.3: PCI bridge to [bus 01-01]
[ 0.212037] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ 0.212046] pci 0000:00:1c.3: bridge window [mem 0xf7f00000-0xf7ffffff]
[ 0.212058] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.212154] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.212163] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.212172] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.212184] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.212191] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.212197] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.212204] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.212210] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.212217] pci 0000:00:1e.0: bridge window [mem 0x3f800000-0xffffffff] (subtractive decode)
[ 0.212250] pci_bus 0000:00: on NUMA node 0
[ 0.212258] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.212528] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.212585] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 0.226842] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.226977] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.227108] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.227238] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.227370] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.227499] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.227631] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[ 0.227763] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.227836] HEST: Table is not found!
[ 0.227981] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.228009] vgaarb: loaded
[ 0.228088] PCI: Using ACPI for IRQ routing
[ 0.228161] PCI: pci_cache_line_size set to 64 bytes
[ 0.228268] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.228274] reserve RAM buffer: 000000003f7a0000 - 000000003fffffff
[ 0.228498] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.228510] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.228520] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.232028] Switching to clocksource tsc
[ 0.233785] pnp: PnP ACPI init
[ 0.233821] ACPI: bus type pnp registered
[ 0.236946] pnp: PnP ACPI: found 13 devices
[ 0.236951] ACPI: ACPI bus type pnp unregistered
[ 0.236959] PnPBIOS: Disabled by ACPI PNP
[ 0.236985] system 00:01: [mem 0xfed13000-0xfed19fff] has been reserved
[ 0.237004] system 00:08: [io 0x025c-0x025f] has been reserved
[ 0.237011] system 00:08: [io 0x0380-0x0383] has been reserved
[ 0.237019] system 00:08: [io 0x0400-0x041f] has been reserved
[ 0.237026] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.237038] system 00:08: [io 0x0800-0x087f] has been reserved
[ 0.237045] system 00:08: [io 0x0480-0x04bf] has been reserved
[ 0.237053] system 00:08: [mem 0x8c000000-0x8c01ffff] has been reserved
[ 0.237061] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.237068] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.237076] system 00:08: [mem 0xfed50000-0xfed8ffff] has been reserved
[ 0.237083] system 00:08: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.237091] system 00:08: [mem 0xfff00000-0xffffffff] could not be reserved
[ 0.237105] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.237113] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.237124] system 00:0b: [mem 0xe0000000-0xe3ffffff] has been reserved
[ 0.237137] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.237144] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.237151] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.237158] system 00:0c: [mem 0x00100000-0x3f7fffff] could not be reserved
[ 0.275495] pci 0000:00:1c.0: BAR 14: assigned [mem 0x3f800000-0x3f9fffff]
[ 0.275505] pci 0000:00:1c.0: BAR 15: assigned [mem 0x3fa00000-0x3fbfffff 64bit pref]
[ 0.275515] pci 0000:00:1c.3: BAR 15: assigned [mem 0x3fc00000-0x3fdfffff 64bit pref]
[ 0.275524] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.275533] pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.275539] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
[ 0.275547] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.275558] pci 0000:00:1c.0: bridge window [mem 0x3f800000-0x3f9fffff]
[ 0.275567] pci 0000:00:1c.0: bridge window [mem 0x3fa00000-0x3fbfffff 64bit pref]
[ 0.275579] pci 0000:00:1c.1: PCI bridge to [bus 02-03]
[ 0.275586] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.275597] pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.275606] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf6ffffff 64bit pref]
[ 0.275618] pci 0000:00:1c.3: PCI bridge to [bus 01-01]
[ 0.275625] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ 0.275636] pci 0000:00:1c.3: bridge window [mem 0xf7f00000-0xf7ffffff]
[ 0.275645] pci 0000:00:1c.3: bridge window [mem 0x3fc00000-0x3fdfffff 64bit pref]
[ 0.275658] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[ 0.275662] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.275671] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.275679] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.275705] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[ 0.275725] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.275735] pci 0000:00:1c.0: setting latency timer to 64
[ 0.275751] pci 0000:00:1c.1: enabling device (0106 -> 0107)
[ 0.275762] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.275771] pci 0000:00:1c.1: setting latency timer to 64
[ 0.275790] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.275798] pci 0000:00:1c.3: setting latency timer to 64
[ 0.275811] pci 0000:00:1e.0: setting latency timer to 64
[ 0.275820] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.275826] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.275832] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.275839] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.275847] pci_bus 0000:00: resource 8 [mem 0x3f800000-0xffffffff]
[ 0.275854] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
[ 0.275860] pci_bus 0000:04: resource 1 [mem 0x3f800000-0x3f9fffff]
[ 0.275867] pci_bus 0000:04: resource 2 [mem 0x3fa00000-0x3fbfffff 64bit pref]
[ 0.275873] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.275879] pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.275885] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf6ffffff 64bit pref]
[ 0.275892] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.275898] pci_bus 0000:01: resource 1 [mem 0xf7f00000-0xf7ffffff]
[ 0.275904] pci_bus 0000:01: resource 2 [mem 0x3fc00000-0x3fdfffff 64bit pref]
[ 0.275920] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.275926] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.275932] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.275938] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.275945] pci_bus 0000:05: resource 8 [mem 0x3f800000-0xffffffff]
[ 0.276015] NET: Registered protocol family 2
[ 0.276130] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.276694] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.277625] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.278088] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.278094] TCP reno registered
[ 0.278103] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.278122] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.278334] NET: Registered protocol family 1
[ 0.278377] pci 0000:00:02.0: Boot video device
[ 0.278543] PCI: CLS 32 bytes, default 64
[ 0.278652] Unpacking initramfs...
[ 0.781392] Freeing initrd memory: 9648k freed
[ 0.791319] audit: initializing netlink socket (disabled)
[ 0.791344] type=2000 audit(1290965412.784:1): initialized
[ 0.803531] highmem bounce pool size: 64 pages
[ 0.803543] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.806506] VFS: Disk quotas dquot_6.5.2
[ 0.806635] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.806795] msgmni has been set to 1750
[ 0.807141] alg: No test for stdrng (krng)
[ 0.807257] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.807265] io scheduler noop registered
[ 0.807269] io scheduler deadline registered (default)
[ 0.807294] io scheduler cfq registered
[ 0.807750] ERST: Table is not found!
[ 0.807771] isapnp: Scanning for PnP cards...
[ 1.161395] isapnp: No Plug & Play device found
[ 1.161856] Linux agpgart interface v0.103
[ 1.162033] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[ 1.162377] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 1.164945] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.165089] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.165904] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.184798] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.184813] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.184982] mice: PS/2 mouse device common for all mice
[ 1.185064] rtc_cmos 00:03: RTC can wake from S4
[ 1.185167] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.185211] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 1.185249] cpuidle: using governor ladder
[ 1.185254] cpuidle: using governor menu
[ 1.185933] TCP cubic registered
[ 1.186240] NET: Registered protocol family 10
[ 1.187017] lo: Disabled Privacy Extensions
[ 1.187527] Mobile IPv6
[ 1.187533] NET: Registered protocol family 17
[ 1.187544] Registering the dns_resolver key type
[ 1.187590] Using IPI No-Shortcut mode
[ 1.187764] PM: Resume from disk failed.
[ 1.187789] registered taskstats version 1
[ 1.188250] rtc_cmos 00:03: setting system clock to 2010-11-28 17:30:13 UTC (1290965413)
[ 1.188308] Initalizing network drop monitor service
[ 1.188402] Freeing unused kernel memory: 404k freed
[ 1.188682] Write protecting the kernel text: 2656k
[ 1.188738] Write protecting the kernel read-only data: 996k
[ 1.203323] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.310608] udev[55]: starting version 164
[ 1.560787] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.560814] ACPI: Thermal Zone [TZ00] (55 C)
[ 1.674999] atl1c 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.675026] atl1c 0000:01:00.0: setting latency timer to 64
[ 1.713719] usbcore: registered new interface driver usbfs
[ 1.714177] usbcore: registered new interface driver hub
[ 1.714316] usbcore: registered new device driver usb
[ 1.728365] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.728446] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.728495] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.728504] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.728558] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.728609] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 1.728629] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.732530] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.732585] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7db7c00
[ 1.749043] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.749134] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.749143] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.749150] usb usb1: Product: EHCI Host Controller
[ 1.749157] usb usb1: Manufacturer: Linux 2.6.36-trunk-686-bigmem ehci_hcd
[ 1.749164] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.749479] hub 1-0:1.0: USB hub found
[ 1.749493] hub 1-0:1.0: 8 ports detected
[ 1.789493] SCSI subsystem initialized
[ 1.789760] atl1c 0000:01:00.0: version 1.0.1.0-NAPI
[ 1.795490] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.795589] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.795613] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.795623] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.795653] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.795705] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400
[ 1.795822] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.795831] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.795839] usb usb2: Product: UHCI Host Controller
[ 1.795846] usb usb2: Manufacturer: Linux 2.6.36-trunk-686-bigmem uhci_hcd
[ 1.795853] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.796534] hub 2-0:1.0: USB hub found
[ 1.796551] hub 2-0:1.0: 2 ports detected
[ 1.796734] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.796754] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.796764] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.796789] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.796861] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480
[ 1.796978] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.796987] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.796995] usb usb3: Product: UHCI Host Controller
[ 1.797002] usb usb3: Manufacturer: Linux 2.6.36-trunk-686-bigmem uhci_hcd
[ 1.797010] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.797588] hub 3-0:1.0: USB hub found
[ 1.797606] hub 3-0:1.0: 2 ports detected
[ 1.797797] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.797818] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.797827] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.797852] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.797922] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
[ 1.798041] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.798050] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.798058] usb usb4: Product: UHCI Host Controller
[ 1.798065] usb usb4: Manufacturer: Linux 2.6.36-trunk-686-bigmem uhci_hcd
[ 1.798073] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.798678] hub 4-0:1.0: USB hub found
[ 1.798696] hub 4-0:1.0: 2 ports detected
[ 1.798880] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 1.798902] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.798911] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.798936] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.799007] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880
[ 1.799117] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.799127] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.799135] usb usb5: Product: UHCI Host Controller
[ 1.799142] usb usb5: Manufacturer: Linux 2.6.36-trunk-686-bigmem uhci_hcd
[ 1.799149] usb usb5: SerialNumber: 0000:00:1d.3
[ 1.799743] hub 5-0:1.0: USB hub found
[ 1.799762] hub 5-0:1.0: 2 ports detected
[ 1.864725] libata version 3.00 loaded.
[ 1.887316] ahci 0000:00:1f.2: version 3.0
[ 1.887363] ahci 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 1.887460] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
[ 1.887596] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
[ 1.887610] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 1.887623] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.887941] scsi0 : ahci
[ 1.888424] scsi1 : ahci
[ 1.888668] scsi2 : ahci
[ 1.888874] scsi3 : ahci
[ 1.889342] ata1: SATA max UDMA/133 abar m1024@0xf7db7800 port 0xf7db7900 irq 40
[ 1.889348] ata2: DUMMY
[ 1.889351] ata3: DUMMY
[ 1.889355] ata4: DUMMY
[ 2.072034] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 2.208040] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.209118] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.209497] ata1.00: ATA-8: Hitachi HTS543216L9SA00, FB2OC40C, max UDMA/133
[ 2.209504] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.210720] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.211096] ata1.00: configured for UDMA/133
[ 2.224238] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54321 FB2O PQ: 0 ANSI: 5
[ 2.241704] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.241913] sd 0:0:0:0: [sda] Write Protect is off
[ 2.241923] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.242010] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.278633] usb 1-2: New USB device found, idVendor=13d3, idProduct=5095
[ 2.278643] usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=0
[ 2.278649] usb 1-2: Product: USB2.0 UVC 1.3M WebCam
[ 2.278654] usb 1-2: Manufacturer: GenesysLogic Technology Co. IV, Ltd.
[ 2.396044] usb 1-3: new high speed USB device using ehci_hcd and address 3
[ 2.529545] usb 1-3: New USB device found, idVendor=058f, idProduct=6335
[ 2.529552] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.529558] usb 1-3: Product: Mass Storage Device
[ 2.529563] usb 1-3: Manufacturer: Generic
[ 2.529567] usb 1-3: SerialNumber: 058F63356336
[ 2.549151] Initializing USB Mass Storage driver...
[ 2.549441] scsi4 : usb-storage 1-3:1.0
[ 2.549718] usbcore: registered new interface driver usb-storage
[ 2.549725] USB Mass Storage support registered.
[ 2.599285] sda: sda1 sda2
[ 2.600065] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.752045] usb 1-8: new high speed USB device using ehci_hcd and address 5
[ 2.894097] atl1c 0000:01:00.0: irq 41 for MSI/MSI-X
[ 2.895261] usb 1-8: New USB device found, idVendor=12d1, idProduct=1001
[ 2.895273] usb 1-8: New USB device strings: Mfr=3, Product=2, SerialNumber=0
[ 2.895281] usb 1-8: Product: HUAWEI Mobile
[ 2.895287] usb 1-8: Manufacturer: HUAWEI Technology
[ 2.952734] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2.996521] device-mapper: uevent: version 1.0.3
[ 2.997251] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
[ 3.140034] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 3.315359] usb 5-1: New USB device found, idVendor=0b05, idProduct=b700
[ 3.315366] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.315372] usb 5-1: Product: BT-253
[ 3.315376] usb 5-1: Manufacturer: Broadcom Corp
[ 3.315381] usb 5-1: SerialNumber: 0025D3A19DF9
[ 3.548889] scsi 4:0:0:0: Direct-Access Single Flash Reader 1.00 PQ: 0 ANSI: 0
[ 4.379128] sd 4:0:0:0: [sdb] 4022272 512-byte logical blocks: (2.05 GB/1.91 GiB)
[ 4.379866] sd 4:0:0:0: [sdb] Write Protect is off
[ 4.379873] sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 4.379879] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4.382365] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4.383631] sdb: sdb1
[ 4.386271] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4.386280] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 10.184602] Btrfs loaded
[ 10.192448] device fsid 4c4864c390d7cfd3-4070e4fa07dddd85 devid 1 transid 9109 /dev/mapper/croot
[ 14.398187] udev[422]: starting version 164
[ 15.155150] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 15.225234] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 15.264319] ACPI: Lid Switch [LID]
[ 15.265089] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 15.265399] ACPI: Sleep Button [SLPB]
[ 15.266724] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 15.267073] ACPI: Power Button [PWRB]
[ 15.267700] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 15.268201] ACPI: Power Button [PWRF]
[ 15.302934] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 15.311761] ACPI: acpi_idle registered with cpuidle
[ 15.326433] Monitor-Mwait will be used to enter C-1 state
[ 15.332101] Monitor-Mwait will be used to enter C-2 state
[ 15.332140] Marking TSC unstable due to TSC halts in idle
[ 15.373895] Switching to clocksource hpet
[ 15.409637] ACPI: Battery Slot [BAT0] (battery present)
[ 15.414197] ACPI: AC Adapter [AC0] (on-line)
[ 15.428132] acpi device:22: registered as cooling_device2
[ 15.428523] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 15.428896] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 15.472284] intel_rng: FWH not detected
[ 15.495511] usbcore: registered new interface driver usbserial
[ 15.495574] USB Serial support registered for generic
[ 15.496680] usbcore: registered new interface driver usbserial_generic
[ 15.496688] usbserial: USB Serial Driver core
[ 15.559275] leds_ss4200: no LED devices found
[ 15.597506] Bluetooth: Core ver 2.15
[ 15.597570] NET: Registered protocol family 31
[ 15.597576] Bluetooth: HCI device and connection manager initialized
[ 15.597584] Bluetooth: HCI socket layer initialized
[ 15.653835] USB Serial support registered for GSM modem (1-port)
[ 15.654036] option 1-8:1.0: GSM modem (1-port) converter detected
[ 15.654308] usb 1-8: GSM modem (1-port) converter now attached to ttyUSB0
[ 15.654341] option 1-8:1.1: GSM modem (1-port) converter detected
[ 15.654513] usb 1-8: GSM modem (1-port) converter now attached to ttyUSB1
[ 15.654541] option 1-8:1.2: GSM modem (1-port) converter detected
[ 15.654711] usb 1-8: GSM modem (1-port) converter now attached to ttyUSB2
[ 15.654827] usbcore: registered new interface driver option
[ 15.654833] option: v0.7.2:USB Driver for GSM modems
[ 15.725666] cfg80211: Calling CRDA to update world regulatory domain
[ 15.725800] cfg80211: Calling CRDA for country: EU
[ 15.769479] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 15.786518] usbcore: registered new interface driver btusb
[ 15.800570] eeepc_laptop: Eee PC Hotkey Driver
[ 15.800714] eeepc_laptop: Hotkey init flags 0x41
[ 15.801227] eeepc_laptop: TYPE (2000000) not reported by BIOS, enabling anyway
[ 15.805940] eeepc_laptop: PANELPOWER (4000000) not reported by BIOS, enabling anyway
[ 15.810919] eeepc_laptop: TPD (8000000) not reported by BIOS, enabling anyway
[ 15.810927] eeepc_laptop: Get control methods supported: 0xe301713
[ 15.816528] eeepc_laptop: Backlight controlled by ACPI video driver
[ 15.817651] input: Asus EeePC extra buttons as /devices/platform/eeepc/input/input6
[ 15.826515] Registered led device: eeepc::touchpad
[ 15.879642] [drm] Initialized drm 1.1.0 20060810
[ 15.939077] Linux video capture interface: v2.00
[ 16.308281] uvcvideo: Found UVC 1.00 device USB2.0 UVC 1.3M WebCam (13d3:5095)
[ 16.337639] input: USB2.0 UVC 1.3M WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/input/input7
[ 16.337815] usbcore: registered new interface driver uvcvideo
[ 16.337821] USB Video Class driver (v0.1.0)
[ 16.432883] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 16.433030] HDA Intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[ 16.433086] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 16.524231] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1a0b1, caps: 0xd04731/0xa40000/0xa0000
[ 16.577899] ath9k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 16.577924] ath9k 0000:02:00.0: setting latency timer to 64
[ 16.629493] ath: EEPROM regdomain: 0x60
[ 16.629502] ath: EEPROM indicates we should expect a direct regpair map
[ 16.629512] ath: Country alpha2 being used: 00
[ 16.629517] ath: Regpair used: 0x60
[ 16.644593] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 17.558532] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 17.558542] i915 0000:00:02.0: setting latency timer to 64
[ 17.599681] [drm] set up 7M of stolen space
[ 17.707159] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 17.708050] [drm] initialized overlay support
[ 17.991504] phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 17.993230] Registered led device: ath9k-phy0::radio
[ 17.993292] Registered led device: ath9k-phy0::assoc
[ 17.993347] Registered led device: ath9k-phy0::tx
[ 17.993403] Registered led device: ath9k-phy0::rx
[ 17.993420] phy0: Atheros AR9285 Rev:2 mem=0xf92e0000, irq=17
[ 18.382542] Console: switching to colour frame buffer device 128x37
[ 18.389183] fb0: inteldrmfb frame buffer device
[ 18.389187] drm: registered panic notifier
[ 18.389211] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 19.069814] btrfs: use compression
[ 20.843447] Adding 2000056k swap on /dev/mapper/cswap. Priority:-1 extents:1 across:2000056k
[ 21.878746] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 25.527600] fuse init (API version 7.15)
[ 27.437099] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input9
[ 28.797056] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 31.273695] Bluetooth: L2CAP ver 2.15
[ 31.273702] Bluetooth: L2CAP socket layer initialized
[ 31.346898] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 31.346907] Bluetooth: BNEP filters: protocol multicast
[ 31.355483] Bluetooth: RFCOMM TTY layer initialized
[ 31.355496] Bluetooth: RFCOMM socket layer initialized
[ 31.355502] Bluetooth: RFCOMM ver 1.11
[ 31.474657] Bridge firewalling registered
[ 31.513449] Bluetooth: SCO (Voice Link) ver 0.6
[ 31.513456] Bluetooth: SCO socket layer initialized
[ 42.099469] lp: driver loaded but no devices found
[ 42.115263] ppdev: user-space parallel port driver
[ 80.897163] wlan0: authenticate with 0a:80:48:62:fd:a4 (try 1)
[ 80.900789] wlan0: authenticated
[ 80.900852] wlan0: associate with 0a:80:48:62:fd:a4 (try 1)
[ 80.908115] wlan0: RX AssocResp from 0a:80:48:62:fd:a4 (capab=0x11 status=0 aid=1)
[ 80.908125] wlan0: associated
[ 80.908816] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 80.908973] cfg80211: Calling CRDA for country: DE
[ 91.240047] wlan0: no IPv6 routers present
[ 117.542186] wlan0: deauthenticating from 0a:80:48:62:fd:a4 by local choice (reason=3)
[ 117.558691] cfg80211: Calling CRDA to update world regulatory domain
[ 117.559182] cfg80211: Calling CRDA for country: EU
[ 118.204595] PM: Syncing filesystems ... done.
[ 118.259729] PM: Preparing system for mem sleep
[ 118.290633] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 118.304148] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 118.320108] PM: Entering mem sleep
[ 118.320187] Suspending console(s) (use no_console_suspend to debug)
[ 118.320767] option: option_instat_callback: error -2
[ 118.320844] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 118.320996] sd 0:0:0:0: [sda] Stopping disk
[ 118.322376] btusb_intr_complete: hci0 urb ef2b5480 failed to resubmit (1)
[ 118.323372] btusb_bulk_complete: hci0 urb ef2b5580 failed to resubmit (1)
[ 118.324375] btusb_bulk_complete: hci0 urb ef2b5780 failed to resubmit (1)
[ 118.396972] ACPI handle has no context!
[ 118.396982] ath9k 0000:02:00.0: PCI INT A disabled
[ 118.396985] atl1c 0000:01:00.0: PCI INT A disabled
[ 118.396996] ACPI handle has no context!
[ 118.397040] uhci_hcd 0000:00:1d.3: PCI INT D disabled
[ 118.397045] ehci_hcd 0000:00:1d.7: PCI INT A disabled
[ 118.397056] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[ 118.397060] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[ 118.397070] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[ 118.397112] HDA Intel 0000:00:1b.0: PCI INT A disabled
[ 118.397412] i915 0000:00:02.0: PCI INT A disabled
[ 118.868064] PM: suspend of devices complete after 547.653 msecs
[ 118.884385] PM: late suspend of devices complete after 16.302 msecs
[ 118.884450] ACPI: Preparing to enter system sleep state S3
[ 118.964674] PM: Saving platform NVS memory
[ 118.992429] Disabling non-boot CPUs ...
[ 119.096048] CPU 1 is now offline
[ 119.096054] SMP alternatives: switching to UP code
[ 119.102354] Back to C!
[ 119.102354] PM: Restoring platform NVS memory
[ 119.102354] Enabling non-boot CPUs ...
[ 119.102354] SMP alternatives: switching to SMP code
[ 119.108327] Booting Node 0 Processor 1 APIC 0x1
[ 119.101817] Initializing CPU#1
[ 119.196802] NMI watchdog enabled, takes one hw-pmu counter.
[ 119.200108] CPU1 is up
[ 119.200304] ACPI: Waking up from system sleep state S3
[ 120.056395] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[ 120.056450] pci 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x3fb13fa1)
[ 120.056462] pci 0000:00:1c.0: restoring config space at offset 0x8 (was 0xfff0, writing 0x3f903f80)
[ 120.056474] pci 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x1010)
[ 120.056493] pci 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100104, writing 0x100107)
[ 120.056552] pci 0000:00:1c.1: restoring config space at offset 0x7 (was 0xf0, writing 0x2020)
[ 120.056571] pci 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100106, writing 0x100107)
[ 120.056627] pci 0000:00:1c.3: restoring config space at offset 0x9 (was 0x1fff1, writing 0x3fd13fc1)
[ 120.056698] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[ 120.056743] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[ 120.056788] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[ 120.056833] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[ 120.056886] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[ 120.057036] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[ 120.057321] PM: early resume of devices complete after 1.058 msecs
[ 120.057725] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 120.057739] i915 0000:00:02.0: setting latency timer to 64
[ 120.060674] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 120.060689] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 120.060752] HDA Intel 0000:00:1b.0: irq 41 for MSI/MSI-X
[ 120.060804] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 120.060814] pci 0000:00:1c.0: setting latency timer to 64
[ 120.060830] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 120.060839] pci 0000:00:1c.1: setting latency timer to 64
[ 120.060855] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 120.060865] pci 0000:00:1c.3: setting latency timer to 64
[ 120.060883] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 120.060895] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 120.060928] usb usb2: root hub lost power or was reset
[ 120.060951] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 120.060963] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 120.060993] usb usb3: root hub lost power or was reset
[ 120.061014] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 120.061026] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 120.061056] usb usb4: root hub lost power or was reset
[ 120.061077] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 120.061089] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 120.061119] usb usb5: root hub lost power or was reset
[ 120.061140] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 120.061152] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 120.061229] pci 0000:00:1e.0: setting latency timer to 64
[ 120.061254] ahci 0000:00:1f.2: setting latency timer to 64
[ 120.061328] ath9k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 120.061556] sd 0:0:0:0: [sda] Starting disk
[ 120.424098] usb 1-2: reset high speed USB device using ehci_hcd and address 2
[ 120.676076] usb 5-1: reset full speed USB device using uhci_hcd and address 2
[ 120.772085] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 120.773509] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 120.787067] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 120.787622] ata1.00: configured for UDMA/133
[ 121.399457] btusb 5-1:1.0: no reset_resume for driver btusb?
[ 121.399467] btusb 5-1:1.1: no reset_resume for driver btusb?
[ 121.492082] usb 1-3: reset high speed USB device using ehci_hcd and address 3
[ 121.651929] PM: resume of devices complete after 1594.500 msecs
[ 121.652790] PM: Finishing wakeup.
[ 121.652795] Restarting tasks ...
[ 121.652901] hub 1-0:1.0: over-current change on port 1
[ 121.672643] done.
[ 121.672657] video LNXVIDEO:00: Restoring backlight state
[ 121.756063] hub 1-0:1.0: over-current change on port 5
[ 121.860077] hub 1-0:1.0: over-current change on port 6
[ 121.964078] usb 1-8: USB disconnect, address 5
[ 121.964395] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[ 121.964473] option 1-8:1.0: device disconnected
[ 121.964720] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[ 121.964771] option 1-8:1.1: device disconnected
[ 121.965006] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[ 121.965065] option 1-8:1.2: device disconnected
[ 122.207496] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 122.212077] usb 1-8: new high speed USB device using ehci_hcd and address 6
[ 122.215029] atl1c 0000:01:00.0: irq 42 for MSI/MSI-X
[ 122.272935] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 122.357374] usb 1-8: New USB device found, idVendor=12d1, idProduct=1001
[ 122.357385] usb 1-8: New USB device strings: Mfr=3, Product=2, SerialNumber=0
[ 122.357394] usb 1-8: Product: HUAWEI Mobile
[ 122.357401] usb 1-8: Manufacturer: HUAWEI Technology
[ 122.376654] option 1-8:1.0: GSM modem (1-port) converter detected
[ 122.376982] usb 1-8: GSM modem (1-port) converter now attached to ttyUSB0
[ 122.383399] option 1-8:1.1: GSM modem (1-port) converter detected
[ 122.383669] usb 1-8: GSM modem (1-port) converter now attached to ttyUSB1
[ 122.385226] option 1-8:1.2: GSM modem (1-port) converter detected
[ 122.385498] usb 1-8: GSM modem (1-port) converter now attached to ttyUSB2
[ 122.497150] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 125.063628] wlan0: authenticate with 0a:80:48:62:fd:a4 (try 1)
[ 125.065543] wlan0: authenticated
[ 125.065610] wlan0: associate with 0a:80:48:62:fd:a4 (try 1)
[ 125.069633] wlan0: RX AssocResp from 0a:80:48:62:fd:a4 (capab=0x11 status=0 aid=1)
[ 125.069644] wlan0: associated
[ 125.070092] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 125.070671] cfg80211: Calling CRDA for country: DE
[ 135.744047] wlan0: no IPv6 routers present
Bus 005 Device 002: ID 0b05:b700 ASUSTek Computer, Inc. Broadcom Bluetooth 2.1
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 006: ID 12d1:1001 Huawei Technologies Co., Ltd. E620 USB Modem
Bus 001 Device 003: ID 058f:6335 Alcor Micro Corp. SD/MMC Card Reader
Bus 001 Device 002: ID 13d3:5095 IMC Networks
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Reply to: