Bug#604824: linux-2.6: problems with ata disk interface: temporary freezes
Hallo,
here it is $(lspci -vn) and $(dmesg) without pci=noacpi from today boot.
Quite embarassingly it does not contain any error message.
Fulvio
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-27) (maks@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Sat Oct 30 22:47:19 UTC 2010
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffd8000 (usable)
[ 0.000000] BIOS-e820: 000000007ffd8000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0007000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] last_pfn = 0x7ffd8 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 0FEDA0000 mask FFFFE0000 write-through
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037000000 page 2M
[ 0.000000] 0037000000 - 00373fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 7000-d000
[ 0.000000] RAMDISK: 377cc000 - 37fef746
[ 0.000000] Allocated new RAMDISK: 00100000 - 00923746
[ 0.000000] Move RAMDISK from 00000000377cc000 - 0000000037fef745 to 00100000 - 00923745
[ 0.000000] ACPI: RSDP 000fc9b0 00014 (v00 DELL )
[ 0.000000] ACPI: RSDT 7ffd8790 00040 (v01 DELL CPi R 27D5091E ASL 00000061)
[ 0.000000] ACPI: FACP 7ffd9400 00074 (v01 DELL CPi R 27D5091E ASL 00000061)
[ 0.000000] ACPI: DSDT 7ffda000 0355D (v01 INT430 SYSFexxx 00001001 MSFT 0100000E)
[ 0.000000] ACPI: FACS 7ffe8800 00040
[ 0.000000] ACPI: APIC 7ffd9c00 00068 (v01 DELL CPi R 27D5091E ASL 00000047)
[ 0.000000] ACPI: ASF! 7ffd9800 0005B (v16 DELL CPi R 27D5091E ASL 00000061)
[ 0.000000] ACPI: MCFG 7ffd9bc0 0003E (v16 DELL CPi R 27D5091E ASL 00000061)
[ 0.000000] ACPI: SSDT 7ffd8be6 00280 (v01 PmRef Cpu0Ist 00003000 INTL 20030522)
[ 0.000000] ACPI: SSDT 7ffd8a0e 001D8 (v01 PmRef Cpu0Cst 00003001 INTL 20030522)
[ 0.000000] ACPI: SSDT 7ffd8813 001FB (v01 PmRef CpuPm 00003000 INTL 20030522)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1163MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 0 - 373fe000
[ 0.000000] node 0 low ram: 00000000 - 373fe000
[ 0.000000] node 0 bootmap 00009000 - 0000fe80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014c7bb4] TEXT DATA BSS ==> [0001000000 - 00014c7bb4]
[ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
[ 0.000000] #5 [00014c8000 - 00014ce188] BRK ==> [00014c8000 - 00014ce188]
[ 0.000000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
[ 0.000000] #7 [0000100000 - 0000923746] NEW RAMDISK ==> [0000100000 - 0000923746]
[ 0.000000] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0007ffd8
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007ffd8
[ 0.000000] On node 0 totalpages: 524151
[ 0.000000] free_area_init_node: node 0, pgdat c13b2720, node_mem_map c14d0000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3967 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2328 pages used for memmap
[ 0.000000] HighMem zone: 295618 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2800000 s34296 r0 d23048 u2097152
[ 0.000000] pcpu-alloc: s34296 r0 d23048 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520055
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=51df229f-16d0-40c7-9deb-1758755ba56e ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000373fe:0007ffd8)
[ 0.000000] Memory: 2065072k/2096992k available (2499k kernel code, 30628k reserved, 1324k data, 372k init, 1191784k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.000000] .init : 0xc13bd000 - 0xc141a000 ( 372 kB)
[ 0.000000] .data : 0xc1270fd9 - 0xc13bc320 (1324 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1270fd9 (2499 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1862.255 MHz processor.
[ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3724.51 BogoMIPS (lpj=7449020)
[ 0.004030] Security Framework initialized
[ 0.004038] SELinux: Disabled at boot.
[ 0.004047] Mount-cache hash table entries: 512
[ 0.004215] Initializing cgroup subsys ns
[ 0.004220] Initializing cgroup subsys cpuacct
[ 0.004225] Initializing cgroup subsys devices
[ 0.004228] Initializing cgroup subsys freezer
[ 0.004231] Initializing cgroup subsys net_cls
[ 0.004260] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004262] CPU: L2 cache: 2048K
[ 0.004268] mce: CPU supports 5 MCE banks
[ 0.004279] CPU0: Thermal monitoring enabled (TM1)
[ 0.004290] Performance Events: p6 PMU driver.
[ 0.004297] ... version: 0
[ 0.004298] ... bit width: 32
[ 0.004300] ... generic registers: 2
[ 0.004302] ... value mask: 00000000ffffffff
[ 0.004304] ... max period: 000000007fffffff
[ 0.004307] ... fixed-purpose events: 0
[ 0.004309] ... event mask: 0000000000000003
[ 0.004314] Checking 'hlt' instruction... OK.
[ 0.020385] SMP alternatives: switching to UP code
[ 0.024111] ACPI: Core revision 20090903
[ 0.031913] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.032339] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.072034] CPU0: Intel(R) Pentium(R) M processor 1.86GHz stepping 08
[ 0.076001] Brought up 1 CPUs
[ 0.076001] Total of 1 processors activated (3724.51 BogoMIPS).
[ 0.076001] CPU0 attaching NULL sched-domain.
[ 0.076001] devtmpfs: initialized
[ 0.076001] regulator: core version 0.5
[ 0.076001] NET: Registered protocol family 16
[ 0.076001] ACPI: bus type pci registered
[ 0.076001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.076001] PCI: MCFG area at e0000000 reserved in E820
[ 0.076001] PCI: Using MMCONFIG for extended config space
[ 0.076001] PCI: Using configuration type 1 for base access
[ 0.076001] bio: create slab <bio-0> at 0
[ 0.076001] ACPI: EC: Look up EC in DSDT
[ 0.094428] ACPI: SSDT 7ffd87d0 00043 (v01 LMPWR DELLLOM 00001001 INTL 20030522)
[ 0.095662] ACPI: Interpreter enabled
[ 0.095667] ACPI: (supports S0 S3 S4 S5)
[ 0.095687] ACPI: Using IOAPIC for interrupt routing
[ 0.126512] ACPI: ACPI Dock Station Driver: 2 docks/bays found
[ 0.138544] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.138647] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.138651] pci 0000:00:01.0: PME# disabled
[ 0.138764] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.138769] pci 0000:00:1c.0: PME# disabled
[ 0.138835] pci 0000:00:1d.0: reg 20 io port: [0xbf80-0xbf9f]
[ 0.138895] pci 0000:00:1d.1: reg 20 io port: [0xbf60-0xbf7f]
[ 0.138956] pci 0000:00:1d.2: reg 20 io port: [0xbf40-0xbf5f]
[ 0.139016] pci 0000:00:1d.3: reg 20 io port: [0xbf20-0xbf3f]
[ 0.139080] pci 0000:00:1d.7: reg 10 32bit mmio: [0xffa80800-0xffa80bff]
[ 0.139139] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.139145] pci 0000:00:1d.7: PME# disabled
[ 0.139250] pci 0000:00:1e.2: reg 10 io port: [0xed00-0xedff]
[ 0.139258] pci 0000:00:1e.2: reg 14 io port: [0xec40-0xec7f]
[ 0.139267] pci 0000:00:1e.2: reg 18 32bit mmio: [0xdffffe00-0xdfffffff]
[ 0.139275] pci 0000:00:1e.2: reg 1c 32bit mmio: [0xdffffd00-0xdffffdff]
[ 0.139312] pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
[ 0.139317] pci 0000:00:1e.2: PME# disabled
[ 0.139355] pci 0000:00:1e.3: reg 10 io port: [0xee00-0xeeff]
[ 0.139363] pci 0000:00:1e.3: reg 14 io port: [0xec80-0xecff]
[ 0.139410] pci 0000:00:1e.3: PME# supported from D0 D3hot D3cold
[ 0.139415] pci 0000:00:1e.3: PME# disabled
[ 0.139502] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.139509] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.139514] pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO
[ 0.139519] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0900-097f
[ 0.139562] pci 0000:00:1f.2: reg 10 io port: [0x1f0-0x1f7]
[ 0.139569] pci 0000:00:1f.2: reg 14 io port: [0x3f4-0x3f7]
[ 0.139578] pci 0000:00:1f.2: reg 18 io port: [0x170-0x177]
[ 0.139586] pci 0000:00:1f.2: reg 1c io port: [0x374-0x377]
[ 0.139594] pci 0000:00:1f.2: reg 20 io port: [0xbfa0-0xbfaf]
[ 0.139627] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.139632] pci 0000:00:1f.2: PME# disabled
[ 0.139669] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xd0000000-0xd7ffffff]
[ 0.139675] pci 0000:01:00.0: reg 14 io port: [0xde00-0xdeff]
[ 0.139681] pci 0000:01:00.0: reg 18 32bit mmio: [0xdfdf0000-0xdfdfffff]
[ 0.139696] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xdfe00000-0xdfe1ffff]
[ 0.139714] pci 0000:01:00.0: supports D1 D2
[ 0.139727] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.139788] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff]
[ 0.139792] pci 0000:00:01.0: bridge 32bit mmio: [0xdfd00000-0xdfefffff]
[ 0.139796] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd0000000-0xd7ffffff]
[ 0.139875] pci 0000:02:00.0: reg 10 64bit mmio: [0xdfcf0000-0xdfcfffff]
[ 0.139967] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.139973] pci 0000:02:00.0: PME# disabled
[ 0.140019] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.140115] pci 0000:00:1c.0: bridge 32bit mmio: [0xdfc00000-0xdfcfffff]
[ 0.140170] pci 0000:03:01.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.140196] pci 0000:03:01.0: supports D1 D2
[ 0.140199] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.140204] pci 0000:03:01.0: PME# disabled
[ 0.140257] pci 0000:03:01.5: reg 10 32bit mmio: [0xdfbfd000-0xdfbfdfff]
[ 0.140267] pci 0000:03:01.5: reg 14 32bit mmio: [0xdfbfe000-0xdfbfefff]
[ 0.140327] pci 0000:03:01.5: supports D1 D2
[ 0.140329] pci 0000:03:01.5: PME# supported from D0 D1 D2 D3hot
[ 0.140335] pci 0000:03:01.5: PME# disabled
[ 0.140393] pci 0000:03:03.0: reg 10 32bit mmio: [0xdfbff000-0xdfbfffff]
[ 0.140460] pci 0000:03:03.0: PME# supported from D0 D3hot D3cold
[ 0.140466] pci 0000:03:03.0: PME# disabled
[ 0.140528] pci 0000:00:1e.0: transparent bridge
[ 0.140536] pci 0000:00:1e.0: bridge 32bit mmio: [0xdfb00000-0xdfbfffff]
[ 0.140578] pci_bus 0000:00: on NUMA node 0
[ 0.140583] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.140847] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.140907] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[ 0.156077] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
[ 0.156193] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
[ 0.156307] ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11)
[ 0.156422] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11)
[ 0.156520] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.156623] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.156725] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.156838] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.156842] vgaarb: loaded
[ 0.156907] PCI: Using ACPI for IRQ routing
[ 0.157186] hpet clockevent registered
[ 0.157190] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.157197] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.157202] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.160018] Switching to clocksource tsc
[ 0.161400] pnp: PnP ACPI init
[ 0.161412] ACPI: bus type pnp registered
[ 0.190642] pnp 00:02: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
[ 0.190647] pnp 00:02: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
[ 0.190719] pnp 00:03: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
[ 0.190723] pnp 00:03: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
[ 0.190727] pnp 00:03: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
[ 0.207865] pnp: PnP ACPI: found 13 devices
[ 0.207867] ACPI: ACPI bus type pnp unregistered
[ 0.207871] PnPBIOS: Disabled by ACPI PNP
[ 0.207882] system 00:00: iomem range 0x0-0x9fbff could not be reserved
[ 0.207885] system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
[ 0.207889] system 00:00: iomem range 0xc0000-0xcffff could not be reserved
[ 0.207892] system 00:00: iomem range 0xe0000-0xfffff could not be reserved
[ 0.207896] system 00:00: iomem range 0x100000-0x7ffd7fff could not be reserved
[ 0.207899] system 00:00: iomem range 0x7ffd8000-0x7fffffff has been reserved
[ 0.207903] system 00:00: iomem range 0xfeda0000-0xfedfffff has been reserved
[ 0.207906] system 00:00: iomem range 0xffb00000-0xffffffff has been reserved
[ 0.207914] system 00:00: iomem range 0xfec00000-0xfec0ffff could not be reserved
[ 0.207917] system 00:00: iomem range 0xfee00000-0xfee0ffff has been reserved
[ 0.207921] system 00:00: iomem range 0xfed20000-0xfed9ffff has been reserved
[ 0.207924] system 00:00: iomem range 0xf0000000-0xf0003fff has been reserved
[ 0.207928] system 00:00: iomem range 0xf0004000-0xf0004fff has been reserved
[ 0.207931] system 00:00: iomem range 0xf0005000-0xf0005fff has been reserved
[ 0.207935] system 00:00: iomem range 0xf0006000-0xf0006fff has been reserved
[ 0.207938] system 00:00: iomem range 0xf0008000-0xf000bfff has been reserved
[ 0.207941] system 00:00: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.207948] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.207962] system 00:03: ioport range 0xf400-0xf4fe has been reserved
[ 0.207965] system 00:03: ioport range 0x1080-0x10bf has been reserved
[ 0.207969] system 00:03: ioport range 0x10c0-0x10df has been reserved
[ 0.207972] system 00:03: ioport range 0x10e0-0x10ff has been reserved
[ 0.207979] system 00:08: ioport range 0x900-0x90f has been reserved
[ 0.207982] system 00:08: ioport range 0x910-0x91f has been reserved
[ 0.207985] system 00:08: ioport range 0x920-0x92f has been reserved
[ 0.207989] system 00:08: ioport range 0x93c-0x93f has been reserved
[ 0.207992] system 00:08: ioport range 0x940-0x97f has been reserved
[ 0.207999] system 00:0c: ioport range 0x930-0x93b has been reserved
[ 0.242717] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.242721] pci 0000:00:01.0: IO window: 0xd000-0xdfff
[ 0.242725] pci 0000:00:01.0: MEM window: 0xdfd00000-0xdfefffff
[ 0.242729] pci 0000:00:01.0: PREFETCH window: 0xd0000000-0xd7ffffff
[ 0.242734] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.242738] pci 0000:00:1c.0: IO window: 0x2000-0x2fff
[ 0.242745] pci 0000:00:1c.0: MEM window: 0xdfc00000-0xdfcfffff
[ 0.242750] pci 0000:00:1c.0: PREFETCH window: 0x00000084000000-0x000000841fffff
[ 0.242764] pci 0000:03:01.0: CardBus bridge, secondary bus 0000:04
[ 0.242767] pci 0000:03:01.0: IO window: 0x003000-0x0030ff
[ 0.242773] pci 0000:03:01.0: IO window: 0x003400-0x0034ff
[ 0.242779] pci 0000:03:01.0: PREFETCH window: 0x80000000-0x83ffffff
[ 0.242785] pci 0000:03:01.0: MEM window: 0x88000000-0x8bffffff
[ 0.242791] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[ 0.242795] pci 0000:00:1e.0: IO window: 0x3000-0x3fff
[ 0.242802] pci 0000:00:1e.0: MEM window: 0xdfb00000-0xdfbfffff
[ 0.242807] pci 0000:00:1e.0: PREFETCH window: 0x80000000-0x83ffffff
[ 0.242824] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.242828] pci 0000:00:01.0: setting latency timer to 64
[ 0.242838] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.242843] pci 0000:00:1c.0: setting latency timer to 64
[ 0.242851] pci 0000:00:1e.0: setting latency timer to 64
[ 0.242863] pci 0000:03:01.0: enabling device (0000 -> 0003)
[ 0.242869] pci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.242878] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.242881] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.242884] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff]
[ 0.242887] pci_bus 0000:01: resource 1 mem: [0xdfd00000-0xdfefffff]
[ 0.242890] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xd7ffffff]
[ 0.242893] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
[ 0.242896] pci_bus 0000:02: resource 1 mem: [0xdfc00000-0xdfcfffff]
[ 0.242899] pci_bus 0000:02: resource 2 pref mem [0x84000000-0x841fffff]
[ 0.242902] pci_bus 0000:03: resource 0 io: [0x3000-0x3fff]
[ 0.242905] pci_bus 0000:03: resource 1 mem: [0xdfb00000-0xdfbfffff]
[ 0.242908] pci_bus 0000:03: resource 2 pref mem [0x80000000-0x83ffffff]
[ 0.242911] pci_bus 0000:03: resource 3 io: [0x00-0xffff]
[ 0.242914] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
[ 0.242917] pci_bus 0000:04: resource 0 io: [0x3000-0x30ff]
[ 0.242919] pci_bus 0000:04: resource 1 io: [0x3400-0x34ff]
[ 0.242922] pci_bus 0000:04: resource 2 pref mem [0x80000000-0x83ffffff]
[ 0.242925] pci_bus 0000:04: resource 3 mem: [0x88000000-0x8bffffff]
[ 0.242957] NET: Registered protocol family 2
[ 0.243043] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.243347] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.244321] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.244903] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.244908] TCP reno registered
[ 0.245044] NET: Registered protocol family 1
[ 0.245168] pci 0000:01:00.0: Boot video device
[ 0.245238] Unpacking initramfs...
[ 0.516267] Freeing initrd memory: 8333k freed
[ 0.523161] audit: initializing netlink socket (disabled)
[ 0.523180] type=2000 audit(1290794795.519:1): initialized
[ 0.528269] highmem bounce pool size: 64 pages
[ 0.528275] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.529784] VFS: Disk quotas dquot_6.5.2
[ 0.529849] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.529930] msgmni has been set to 1723
[ 0.530129] alg: No test for stdrng (krng)
[ 0.530186] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.530189] io scheduler noop registered
[ 0.530192] io scheduler anticipatory registered
[ 0.530194] io scheduler deadline registered
[ 0.530231] io scheduler cfq registered (default)
[ 0.530348] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.530355] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.530470] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.530480] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.530658] isapnp: Scanning for PnP cards...
[ 0.884399] isapnp: No Plug & Play device found
[ 0.885723] Linux agpgart interface v0.103
[ 0.885853] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.885968] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.886359] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.886440] serial 0000:00:1e.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.886446] serial 0000:00:1e.3: PCI INT B disabled
[ 0.886532] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.891077] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.891084] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.891174] mice: PS/2 mouse device common for all mice
[ 0.891315] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.891347] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.891359] cpuidle: using governor ladder
[ 0.891361] cpuidle: using governor menu
[ 0.891365] No iBFT detected.
[ 0.891704] TCP cubic registered
[ 0.891864] NET: Registered protocol family 10
[ 0.892308] lo: Disabled Privacy Extensions
[ 0.892601] Mobile IPv6
[ 0.892604] NET: Registered protocol family 17
[ 0.892619] Using IPI No-Shortcut mode
[ 0.892687] PM: Resume from disk failed.
[ 0.892700] registered taskstats version 1
[ 0.893057] rtc_cmos 00:06: setting system clock to 2010-11-26 18:06:36 UTC (1290794796)
[ 0.893090] Initalizing network drop monitor service
[ 0.893117] Freeing unused kernel memory: 372k freed
[ 0.893333] Write protecting the kernel text: 2500k
[ 0.893354] Write protecting the kernel read-only data: 924k
[ 0.895559] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.912075] udev[46]: starting version 164
[ 1.130352] usbcore: registered new interface driver usbfs
[ 1.130492] usbcore: registered new interface driver hub
[ 1.130637] usbcore: registered new device driver usb
[ 1.140057] SCSI subsystem initialized
[ 1.171281] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.171315] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.171332] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.171336] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.171357] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.171386] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.175267] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.175285] ehci_hcd 0000:00:1d.7: irq 16, io mem 0xffa80800
[ 1.180600] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.180608] ACPI: Thermal Zone [THM] (58 C)
[ 1.185984] libata version 3.00 loaded.
[ 1.191400] tg3.c:v3.102 (September 1, 2009)
[ 1.191421] tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.191430] tg3 0000:02:00.0: setting latency timer to 64
[ 1.192016] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.192058] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.192061] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.192064] usb usb1: Product: EHCI Host Controller
[ 1.192067] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 1.192069] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.192154] usb usb1: configuration #1 chosen from 1 choice
[ 1.192186] hub 1-0:1.0: USB hub found
[ 1.192195] hub 1-0:1.0: 8 ports detected
[ 1.195966] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.196309] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.196318] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.196322] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.196331] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.196361] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000bf80
[ 1.196396] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.196399] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.196402] usb usb2: Product: UHCI Host Controller
[ 1.196404] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.196407] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.196526] usb usb2: configuration #1 chosen from 1 choice
[ 1.196590] hub 2-0:1.0: USB hub found
[ 1.196606] hub 2-0:1.0: 2 ports detected
[ 1.196653] ahci 0000:00:1f.2: version 3.0
[ 1.196665] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.196679] ahci 0000:00:1f.2: PCI INT B disabled
[ 1.196684] ahci: probe of 0000:00:1f.2 failed with error -22
[ 1.200458] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.200465] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.200469] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.200477] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.200513] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000bf60
[ 1.200549] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.200552] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.200555] usb usb3: Product: UHCI Host Controller
[ 1.200557] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.200560] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.200673] usb usb3: configuration #1 chosen from 1 choice
[ 1.200737] hub 3-0:1.0: USB hub found
[ 1.200744] hub 3-0:1.0: 2 ports detected
[ 1.200793] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.200800] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.200803] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.200816] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.200848] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000bf40
[ 1.200880] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.200883] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.200886] usb usb4: Product: UHCI Host Controller
[ 1.200888] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.200891] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.200989] usb usb4: configuration #1 chosen from 1 choice
[ 1.201052] hub 4-0:1.0: USB hub found
[ 1.201059] hub 4-0:1.0: 2 ports detected
[ 1.201105] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.201111] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.201115] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.201122] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.201155] uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000bf20
[ 1.201188] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.201191] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.201194] usb usb5: Product: UHCI Host Controller
[ 1.201197] usb usb5: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.201199] usb usb5: SerialNumber: 0000:00:1d.3
[ 1.201297] usb usb5: configuration #1 chosen from 1 choice
[ 1.201359] hub 5-0:1.0: USB hub found
[ 1.201366] hub 5-0:1.0: 2 ports detected
[ 1.202017] ata_piix 0000:00:1f.2: version 2.13
[ 1.202027] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.202032] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 1.210940] eth0: Tigon3 [partno(BCM95751) rev 4001] (PCI Express) MAC address 00:14:22:e0:cc:40
[ 1.210944] eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[ 1.210947] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 1.210950] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 1.356022] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.356171] scsi0 : ata_piix
[ 1.356327] scsi1 : ata_piix
[ 1.358296] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
[ 1.358299] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
[ 1.522339] ata1.00: ATA-8: SAMSUNG HM160HC, LQ100-10, max UDMA/100
[ 1.522342] ata1.00: 312581808 sectors, multi 8: LBA48
[ 1.522357] ata1.00: applying bridge limits
[ 1.538293] ata1.00: configured for UDMA/100
[ 1.538408] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM160HC LQ10 PQ: 0 ANSI: 5
[ 1.544357] ata2.00: ATAPI: TSSTcorpCD-RW/DVD-ROM TSL462C, DE01, max UDMA/33
[ 1.576267] ata2.00: configured for UDMA/33
[ 1.577077] scsi 1:0:0:0: CD-ROM TSSTcorp CDRW/DVD TSL462C DE01 PQ: 0 ANSI: 5
[ 1.593957] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.594016] sd 0:0:0:0: [sda] Write Protect is off
[ 1.594020] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.594044] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.594182] sda:sr0: scsi3-mmc drive: 10x/24x writer cd/rw xa/form2 cdda tray
[ 1.596974] Uniform CD-ROM driver Revision: 3.20
[ 1.597230] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.649605] sda1 sda2 sda3
[ 1.664783] sda3: <bsd: sda5 sda6 sda7 sda8 sda9 >
[ 1.665495] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.677772] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.678244] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.880010] usb 3-1: new full speed USB device using uhci_hcd and address 2
[ 2.056496] usb 3-1: New USB device found, idVendor=413c, idProduct=8103
[ 2.056500] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.056594] usb 3-1: configuration #1 chosen from 1 choice
[ 2.230732] kjournald starting. Commit interval 5 seconds
[ 2.230740] EXT3-fs: mounted filesystem with ordered data mode.
[ 3.706906] udev[361]: starting version 164
[ 4.180533] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 4.515747] lib80211: common routines for IEEE802.11 drivers
[ 4.515751] lib80211_crypt: registered algorithm 'NULL'
[ 4.520301] ACPI: AC Adapter [AC] (on-line)
[ 4.568919] Marking TSC unstable due to TSC halts in idle
[ 4.570163] processor LNXCPU:00: registered as cooling_device0
[ 4.576033] Switching to clocksource hpet
[ 4.596667] Bluetooth: Core ver 2.15
[ 4.598072] NET: Registered protocol family 31
[ 4.598074] Bluetooth: HCI device and connection manager initialized
[ 4.598077] Bluetooth: HCI socket layer initialized
[ 4.864168] ACPI: Battery Slot [BAT0] (battery present)
[ 4.868071] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 4.870723] ACPI: Lid Switch [LID]
[ 4.870770] ACPI: Battery Slot [BAT1] (battery absent)
[ 4.872118] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 4.872197] ACPI: Power Button [PBTN]
[ 4.872526] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
[ 4.872591] ACPI: Sleep Button [SBTN]
[ 4.884628] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:20/LNXVIDEO:00/input/input5
[ 4.884708] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 4.916282] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 4.916286] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 4.917818] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 4.918610] usbcore: registered new interface driver btusb
[ 4.918907] intel_rng: FWH not detected
[ 4.938254] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 4.969531] yenta_cardbus 0000:03:01.0: CardBus bridge found [1028:0186]
[ 4.969555] yenta_cardbus 0000:03:01.0: Using CSCINT to route CSC interrupts to PCI
[ 4.969558] yenta_cardbus 0000:03:01.0: Routing CardBus interrupts to PCI
[ 4.969564] yenta_cardbus 0000:03:01.0: TI: mfunc 0x01111122, devctl 0x64
[ 5.116324] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 5.116328] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 5.117724] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input6
[ 5.139587] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input7
[ 5.192238] [drm] Initialized drm 1.1.0 20060810
[ 5.201154] yenta_cardbus 0000:03:01.0: ISA IRQ mask 0x0cf8, PCI irq 19
[ 5.201160] yenta_cardbus 0000:03:01.0: Socket status: 30000006
[ 5.201164] pci_bus 0000:03: Raising subordinate bus# of parent bus (#03) from #04 to #07
[ 5.201174] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
[ 5.201178] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x3fff: clean.
[ 5.201414] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge Memory window: 0xdfb00000 - 0xdfbfffff
[ 5.201418] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x83ffffff
[ 5.202495] ipw2200 0000:03:03.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 5.204443] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 5.204485] ipw2200 0000:03:03.0: firmware: requesting ipw2200-bss.fw
[ 5.503085] ipw2200: Detected geography ZZD (13 802.11bg channels, 0 802.11a channels)
[ 5.757146] [drm] radeon kernel modesetting enabled.
[ 5.757207] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.757212] radeon 0000:01:00.0: setting latency timer to 64
[ 5.759237] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 5.760986] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[ 5.761683] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 5.762316] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 5.763070] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 5.764421] [drm] radeon: Initializing kernel modesetting.
[ 5.768923] [drm] register mmio base: 0xDFDF0000
[ 5.768926] [drm] register mmio size: 65536
[ 5.769269] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
[ 5.769291] [drm] Generation 2 PCI interface, using max accessible memory
[ 5.769295] [drm] radeon: VRAM 128M
[ 5.769297] [drm] radeon: VRAM from 0x00000000 to 0x07FFFFFF
[ 5.769299] [drm] radeon: GTT 512M
[ 5.769301] [drm] radeon: GTT from 0x20000000 to 0x3FFFFFFF
[ 5.769341] radeon 0000:01:00.0: irq 26 for MSI/MSI-X
[ 5.769347] radeon 0000:01:00.0: radeon: using MSI.
[ 5.769371] [drm] radeon: irq initialized.
[ 5.770212] [drm] Detected VRAM RAM=128M, BAR=128M
[ 5.770216] [drm] RAM width 128bits DDR
[ 5.771187] [TTM] Zone kernel: Available graphics memory: 441448 kiB.
[ 5.771189] [TTM] Zone highmem: Available graphics memory: 1037340 kiB.
[ 5.771207] [drm] radeon: 128M of VRAM memory ready
[ 5.771209] [drm] radeon: 512M of GTT memory ready.
[ 5.771221] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 5.771743] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[ 5.771783] [drm] PCIE GART of 512M enabled (table at 0x00040000).
[ 5.771792] [drm] radeon: cp idle (0x10000C03)
[ 5.771827] [drm] Loading R300 Microcode
[ 5.772146] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[ 5.827663] [drm] radeon: ring at 0x0000000020000000
[ 5.827686] [drm] ring test succeeded in 1 usecs
[ 5.827822] [drm] radeon: ib pool ready.
[ 5.827885] [drm] ib test succeeded in 0 usecs
[ 5.827974] [drm] DFP table revision: 4
[ 5.828034] [drm] Panel ID String: JF377
[ 5.828036] [drm] Panel Size 1680x1050
[ 5.828066] [drm] Default TV standard: NTSC
[ 5.828068] [drm] 27.000000000 MHz TV ref clk
[ 5.828071] [drm] Default TV standard: NTSC
[ 5.828072] [drm] 27.000000000 MHz TV ref clk
[ 5.828102] [drm] Radeon Display Connectors
[ 5.828104] [drm] Connector 0:
[ 5.828106] [drm] VGA
[ 5.828109] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 5.828111] [drm] Encoders:
[ 5.828113] [drm] CRT1: INTERNAL_DAC1
[ 5.828115] [drm] Connector 1:
[ 5.828117] [drm] DVI-D
[ 5.828118] [drm] HPD1
[ 5.828121] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 5.828123] [drm] Encoders:
[ 5.828125] [drm] DFP1: INTERNAL_TMDS1
[ 5.828127] [drm] Connector 2:
[ 5.828128] [drm] LVDS
[ 5.828130] [drm] Encoders:
[ 5.828132] [drm] LCD1: INTERNAL_LVDS
[ 5.828133] [drm] Connector 3:
[ 5.828135] [drm] S-video
[ 5.828136] [drm] Encoders:
[ 5.828138] [drm] TV1: INTERNAL_DAC2
[ 5.874887] [drm] fb mappable at 0xD00C0000
[ 5.874890] [drm] vram apper at 0xD0000000
[ 5.874892] [drm] size 7056000
[ 5.874894] [drm] fb depth is 24
[ 5.874895] [drm] pitch is 6720
[ 5.918454] Console: switching to colour frame buffer device 210x65
[ 5.929993] fb0: radeondrmfb frame buffer device
[ 5.929995] registered panic notifier
[ 5.930075] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
[ 6.052385] Intel ICH Modem 0000:00:1e.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 6.052403] Intel ICH Modem 0000:00:1e.3: setting latency timer to 64
[ 6.160058] MC'97 1 converters and GPIO not ready (0xff00)
[ 6.160843] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.160900] Intel ICH 0000:00:1e.2: setting latency timer to 64
[ 7.000033] intel8x0_measure_ac97_clock: measured 55321 usecs (2665 samples)
[ 7.000036] intel8x0: clocking to 48000
[ 7.576473] EXT3 FS on sda2, internal journal
[ 7.710330] loop: module loaded
[ 8.374094] kjournald starting. Commit interval 5 seconds
[ 8.374291] EXT3 FS on sda1, internal journal
[ 8.374296] EXT3-fs: mounted filesystem with ordered data mode.
[ 9.121972] fuse init (API version 7.13)
[ 9.813720] lib80211_crypt: registered algorithm 'WEP'
[ 11.433379] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input8
[ 14.010325] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.173491] Bluetooth: L2CAP ver 2.14
[ 16.173494] Bluetooth: L2CAP socket layer initialized
[ 16.223892] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 16.223896] Bluetooth: BNEP filters: protocol multicast
[ 16.230593] Bluetooth: RFCOMM TTY layer initialized
[ 16.230597] Bluetooth: RFCOMM socket layer initialized
[ 16.230599] Bluetooth: RFCOMM ver 1.11
[ 16.264144] Bridge firewalling registered
[ 16.359423] Bluetooth: SCO (Voice Link) ver 0.6
[ 16.359426] Bluetooth: SCO socket layer initialized
[ 17.470340] lp: driver loaded but no devices found
[ 17.582049] ppdev: user-space parallel port driver
[ 20.340027] eth1: no IPv6 routers present
[ 1088.620300] ipw2200 0000:03:03.0: PCI INT A disabled
[ 1096.013847] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 1096.013851] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 1096.013923] ipw2200 0000:03:03.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1096.013982] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 1096.014019] ipw2200 0000:03:03.0: firmware: requesting ipw2200-bss.fw
[ 1096.141681] ipw2200: Detected geography ZZD (13 802.11bg channels, 0 802.11a channels)
[ 1106.788166] eth1: no IPv6 routers present
[ 1112.225856] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 1140.192301] ipw2200 0000:03:03.0: PCI INT A disabled
[ 1144.805676] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 1144.805680] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 1144.805752] ipw2200 0000:03:03.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1144.805810] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 1144.805848] ipw2200 0000:03:03.0: firmware: requesting ipw2200-bss.fw
[ 1144.933168] ipw2200: Detected geography ZZD (13 802.11bg channels, 0 802.11a channels)
[ 1155.644027] eth1: no IPv6 routers present
[ 2030.224605] tg3 0000:02:00.0: PME# enabled
[ 2030.224633] tg3 0000:02:00.0: wake-up capability enabled by ACPI
[ 2047.628375] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 2047.846025] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 2058.472165] eth1: no IPv6 routers present
00:00.0 0600: 8086:2590 (rev 03)
Subsystem: 1028:0186
Flags: bus master, fast devsel, latency 0
Capabilities: <access denied>
00:01.0 0604: 8086:2591 (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: dfd00000-dfefffff
Prefetchable memory behind bridge: d0000000-d7ffffff
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.0 0604: 8086:2660 (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: dfc00000-dfcfffff
Prefetchable memory behind bridge: 0000000084000000-00000000841fffff
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 0c03: 8086:2658 (rev 03) (prog-if 00 [UHCI])
Subsystem: 1028:0186
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at bf80 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 0c03: 8086:2659 (rev 03) (prog-if 00 [UHCI])
Subsystem: 1028:0186
Flags: bus master, medium devsel, latency 0, IRQ 17
I/O ports at bf60 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 0c03: 8086:265a (rev 03) (prog-if 00 [UHCI])
Subsystem: 1028:0186
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at bf40 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 0c03: 8086:265b (rev 03) (prog-if 00 [UHCI])
Subsystem: 1028:0186
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at bf20 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 0c03: 8086:265c (rev 03) (prog-if 20 [EHCI])
Subsystem: 1028:0186
Flags: bus master, medium devsel, latency 0, IRQ 16
Memory at ffa80800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 0604: 8086:2448 (rev d3) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=07, sec-latency=32
I/O behind bridge: 00003000-00003fff
Memory behind bridge: dfb00000-dfbfffff
Prefetchable memory behind bridge: 0000000080000000-0000000083ffffff
Capabilities: <access denied>
00:1e.2 0401: 8086:266e (rev 03)
Subsystem: 1028:0186
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at ed00 [size=256]
I/O ports at ec40 [size=64]
Memory at dffffe00 (32-bit, non-prefetchable) [size=512]
Memory at dffffd00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: Intel ICH
00:1e.3 0703: 8086:266d (rev 03) (prog-if 00 [Generic])
Subsystem: 14f1:5423
Flags: bus master, medium devsel, latency 0, IRQ 17
I/O ports at ee00 [size=256]
I/O ports at ec80 [size=128]
Capabilities: <access denied>
Kernel driver in use: Intel ICH Modem
00:1f.0 0601: 8086:2641 (rev 03)
Subsystem: 1028:0186
Flags: bus master, medium devsel, latency 0
00:1f.2 0101: 8086:2653 (rev 03) (prog-if 80 [Master])
Subsystem: 1028:0186
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 17
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at bfa0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
01:00.0 0300: 1002:3150 (prog-if 00 [VGA controller])
Subsystem: 1028:2002
Flags: bus master, fast devsel, latency 0, IRQ 26
Memory at d0000000 (32-bit, prefetchable) [size=128M]
I/O ports at de00 [size=256]
Memory at dfdf0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at dfe00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
02:00.0 0200: 14e4:1677 (rev 01)
Subsystem: 1028:0186
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at dfcf0000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: tg3
03:01.0 0607: 104c:8036
Subsystem: 1028:0186
Flags: bus master, medium devsel, latency 168, IRQ 19
Memory at dfb00000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=03, secondary=04, subordinate=07, sec-latency=176
Memory window 0: 80000000-83fff000 (prefetchable)
Memory window 1: 88000000-8bfff000
I/O window 0: 00003000-000030ff
I/O window 1: 00003400-000034ff
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
03:01.5 0780: 104c:8038
Subsystem: 1028:0186
Flags: medium devsel, IRQ 5
Memory at dfbfd000 (32-bit, non-prefetchable) [size=4K]
Memory at dfbfe000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
03:03.0 0280: 8086:4220 (rev 05)
Subsystem: 8086:2722
Flags: bus master, medium devsel, latency 64, IRQ 17
Memory at dfbff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ipw2200
At Wed, 24 Nov 2010 16:24:19 +0000,
Ben Hutchings wrote:
>
> [1 <text/plain; UTF-8 (quoted-printable)>]
> On Wed, 2010-11-24 at 16:53 +0100, fulvio ciriaco wrote:
> > Package: linux-2.6
> > Version: 2.6.32+27
> > Severity: important
> > Tags: upstream
> >
> > the normal booting process brings to an unusable system with frequent
> > 3-4 second periods in which the system is unresponsive.
> > The boot option pci=noacpi completely solves the problem.
> > The system is a laptop dell latitude d810.
>
> This is insufficient information. Please use the proper package name in
> future (e.g. linux-image-2.6.32-5-686) so that reportbug will gather
> useful information about your system.
>
> Which version are you really running (the Debian version in the file
> /proc/version)?
>
> Also send the output of 'lspci -vn', and the output of 'dmesg' when the
> system is booted without pci=noacpi.
>
> Ben.
>
> --
> Ben Hutchings
> Once a job is fouled up, anything done to improve it makes it worse.
> [2 This is a digitally signed message part <application/pgp-signature (7bit)>]
>
Reply to: