Bug#603632: [Xen-devel] PVops domain 0 crash on NUMA system only Node==1 present (Was: Re: Bug#603632: linux-image-2.6.32-5-xen-amd64: Linux kernel 2.6.32/xen/amd64 booting fine on bare metal, but not as dom0 with Xen 4.0.1 (Dell R410))
On Thu, 2010-11-25 at 15:01 +0000, Ian Campbell wrote:
> >
> > Booting native with the same Xen-enabled kernel gives:
> [...]
>
> Which looks to be pretty much completely different (this was the exact
> same system and BIOS settings as the original Xen log, right?).
>
> The diff is below but it's so different as to be nearly unreadable.
I've just rebooted my Squeeze with and without the hypervisor with no
BIOS tweaking at all to be sure. Enclosed are the full logs for both
cases.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-xen-amd64 (Debian 2.6.32-27) (maks@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Sat Oct 30 17:04:10 UTC 2010
[ 0.000000] Command line: root=/dev/sda1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cf679000 (usable)
[ 0.000000] BIOS-e820: 00000000cf679000 - 00000000cf68f000 (reserved)
[ 0.000000] BIOS-e820: 00000000cf68f000 - 00000000cf6ce000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cf6ce000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
[ 0.000000] DMI 2.6 present.
[ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-EBFFF uncachable
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 base 00C0000000 mask FFF0000000 write-back
[ 0.000000] 3 base 0100000000 mask FF00000000 write-back
[ 0.000000] 4 base 0200000000 mask FFE0000000 write-back
[ 0.000000] 5 base 0220000000 mask FFF0000000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcf679 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cf679000
[ 0.000000] 0000000000 - 00cf600000 page 2M
[ 0.000000] 00cf600000 - 00cf679000 page 4k
[ 0.000000] kernel direct mapping tables up to cf679000 @ 8000-e000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000230000000
[ 0.000000] 0100000000 - 0230000000 page 2M
[ 0.000000] kernel direct mapping tables up to 230000000 @ c000-16000
[ 0.000000] RAMDISK: 37656000 - 37fefb18
[ 0.000000] ACPI: RSDP 00000000000f09e0 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 00000000000f0ae4 0009C (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: FACP 00000000cf6b3f9c 000F4 (v03 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: DSDT 00000000cf68f000 03B39 (v01 DELL PE_SC3 00000001 INTL 20050624)
[ 0.000000] ACPI: FACS 00000000cf6b6000 00040
[ 0.000000] ACPI: APIC 00000000cf6b3478 0015E (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SPCR 00000000cf6b35d8 00050 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: HPET 00000000cf6b362c 00038 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: DMAR 00000000cf6b3668 001B0 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: MCFG 00000000cf6b38c4 0003C (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: WD__ 00000000cf6b3904 00134 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SLIC 00000000cf6b3a3c 00024 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: ERST 00000000cf692cbc 00270 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: HEST 00000000cf692f2c 003A8 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: BERT 00000000cf692b3c 00030 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: EINJ 00000000cf692b6c 00150 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SRAT 00000000cf6b3bc0 00370 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: TCPA 00000000cf6b3f34 00064 (v02 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SSDT 00000000cf6b7000 02104 (v01 INTEL PPM RCM 80000001 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 1 -> APIC 16 -> Node 0
[ 0.000000] SRAT: PXM 2 -> APIC 0 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 18 -> Node 0
[ 0.000000] SRAT: PXM 2 -> APIC 2 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 20 -> Node 0
[ 0.000000] SRAT: PXM 2 -> APIC 4 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 22 -> Node 0
[ 0.000000] SRAT: PXM 2 -> APIC 6 -> Node 1
[ 0.000000] SRAT: Node 1 PXM 2 0-d0000000
[ 0.000000] SRAT: Node 1 PXM 2 100000000-130000000
[ 0.000000] SRAT: Node 0 PXM 1 130000000-230000000
[ 0.000000] NUMA: Using 28 for the hash shift.
[ 0.000000] Bootmem setup node 0 0000000130000000-0000000230000000
[ 0.000000] NODE_DATA [0000000130000000 - 0000000130007fff]
[ 0.000000] bootmap [0000000130008000 - 0000000130027fff] pages 20
[ 0.000000] (8 early reservations) ==> bootmem [0130000000 - 0230000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE
[ 0.000000] #2 [0001000000 - 0001694994] TEXT DATA BSS
[ 0.000000] #3 [0037656000 - 0037fefb18] RAMDISK
[ 0.000000] #4 [000009ec00 - 0000100000] BIOS reserved
[ 0.000000] #5 [0001695000 - 000169532d] BRK
[ 0.000000] #6 [0000008000 - 000000c000] PGTABLE
[ 0.000000] #7 [000000c000 - 0000011000] PGTABLE
[ 0.000000] Bootmem setup node 1 0000000000000000-0000000130000000
[ 0.000000] NODE_DATA [0000000000011000 - 0000000000018fff]
[ 0.000000] bootmap [0000000000019000 - 000000000003efff] pages 26
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0130000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001694994] TEXT DATA BSS ==> [0001000000 - 0001694994]
[ 0.000000] #3 [0037656000 - 0037fefb18] RAMDISK ==> [0037656000 - 0037fefb18]
[ 0.000000] #4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000]
[ 0.000000] #5 [0001695000 - 000169532d] BRK ==> [0001695000 - 000169532d]
[ 0.000000] #6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000]
[ 0.000000] #7 [000000c000 - 0000011000] PGTABLE ==> [000000c000 - 0000011000]
[ 0.000000] found SMP MP-table at [ffff8800000fe710] fe710
[ 0.000000] [ffffea0004280000-ffffea00043fffff] potential offnode page_structs
[ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880001800000-ffff8800051fffff] on node 1
[ 0.000000] [ffffea0004400000-ffffea0007bfffff] PMD -> [ffff880130200000-ffff8801339fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00230000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 1: 0x00000000 -> 0x000000a0
[ 0.000000] 1: 0x00000100 -> 0x000cf679
[ 0.000000] 1: 0x00100000 -> 0x00130000
[ 0.000000] 0: 0x00130000 -> 0x00230000
[ 0.000000] On node 0 totalpages: 1048576
[ 0.000000] Normal zone: 14336 pages used for memmap
[ 0.000000] Normal zone: 1034240 pages, LIFO batch:31
[ 0.000000] On node 1 totalpages: 1046041
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 109 pages reserved
[ 0.000000] DMA zone: 3835 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 831153 pages, LIFO batch:31
[ 0.000000] Normal zone: 2688 pages used for memmap
[ 0.000000] Normal zone: 193920 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x28] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x29] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x2a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x2b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x2c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x2d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x2e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x2f] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x30] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x31] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x32] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x33] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x34] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x35] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x36] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x37] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0x38] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x39] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x3a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x3b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x3c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x3d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x3e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x20] lapic_id[0x3f] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec80000] gsi_base[32])
[ 0.000000] IOAPIC[1]: apic_id 1, version 32, address 0xfec80000, GSI 32-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 32 CPUs, 24 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 56
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cf679000 - 00000000cf68f000
[ 0.000000] PM: Registered nosave memory: 00000000cf68f000 - 00000000cf6ce000
[ 0.000000] PM: Registered nosave memory: 00000000cf6ce000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fe000000
[ 0.000000] PM: Registered nosave memory: 00000000fe000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:10000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:32 nr_node_ids:2
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880005400000 s90328 r8192 d24360 u131072
[ 0.000000] pcpu-alloc: s90328 r8192 d24360 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 02 04 06 08 10 12 14 16 18 20 22 24 26 28 30
[ 0.000000] pcpu-alloc: [1] 01 03 05 07 09 11 13 15 17 19 21 23 25 27 29 31
[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 2063148
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/sda1
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8174768k/9175040k available (3145k kernel code, 796572k absent, 203700k reserved, 1902k data, 596k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=2
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:1208
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 2261.215 MHz processor.
[ 0.000010] Calibrating delay loop (skipped), value calculated using timer frequency.. 4522.43 BogoMIPS (lpj=9044860)
[ 0.000156] Security Framework initialized
[ 0.000224] SELinux: Disabled at boot.
[ 0.005809] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.008002] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.008866] Mount-cache hash table entries: 256
[ 0.009106] Initializing cgroup subsys ns
[ 0.009172] Initializing cgroup subsys cpuacct
[ 0.009242] Initializing cgroup subsys devices
[ 0.009307] Initializing cgroup subsys freezer
[ 0.009372] Initializing cgroup subsys net_cls
[ 0.009456] CPU: Physical Processor ID: 1
[ 0.009520] CPU: Processor Core ID: 0
[ 0.009585] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.009693] CPU: L2 cache: 256K
[ 0.009755] CPU: L3 cache: 8192K
[ 0.009820] CPU 0/0x10 -> Node 0
[ 0.009884] mce: CPU supports 9 MCE banks
[ 0.009957] CPU0: Thermal monitoring enabled (TM1)
[ 0.010024] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 SHD:8
[ 0.010350] using mwait in idle threads.
[ 0.010414] Performance Events: Nehalem/Corei7 events, Intel PMU driver.
[ 0.010571] ... version: 3
[ 0.010635] ... bit width: 48
[ 0.010698] ... generic registers: 4
[ 0.010762] ... value mask: 0000ffffffffffff
[ 0.010828] ... max period: 000000007fffffff
[ 0.010895] ... fixed-purpose events: 3
[ 0.010959] ... event mask: 000000070000000f
[ 0.011848] ACPI: Core revision 20090903
[ 0.017088] DMAR: Host address width 40
[ 0.017153] DMAR: DRHD base: 0x000000fed90000 flags: 0x1
[ 0.017226] IOMMU fed90000: ver 1:0 cap c90780106f0462 ecap f020f6
[ 0.017295] DMAR: RMRR base: 0x000000cf7c8000 end: 0x000000cf7dffff
[ 0.017364] DMAR: RMRR base: 0x000000cf7b1000 end: 0x000000cf7bffff
[ 0.017433] DMAR: RMRR base: 0x000000cf7a1000 end: 0x000000cf7a1fff
[ 0.017503] DMAR: RMRR base: 0x000000cf7a3000 end: 0x000000cf7a3fff
[ 0.017572] DMAR: RMRR base: 0x000000cf7a5000 end: 0x000000cf7a5fff
[ 0.017641] DMAR: RMRR base: 0x000000cf7a7000 end: 0x000000cf7a7fff
[ 0.017711] DMAR: RMRR base: 0x000000cf7a9000 end: 0x000000cf7a9fff
[ 0.017780] DMAR: RMRR base: 0x000000cf7c0000 end: 0x000000cf7c0fff
[ 0.017849] DMAR: RMRR base: 0x000000cf7c2000 end: 0x000000cf7c2fff
[ 0.017918] DMAR: ATSR flags: 0x0
[ 0.017988] Setting APIC routing to physical flat
[ 0.018496] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.058172] CPU0: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz stepping 05
[ 0.164412] Booting processor 1 APIC 0x0 ip 0x6000
[ 0.174705] Initializing CPU#1
[ 0.252112] CPU: Physical Processor ID: 0
[ 0.252113] CPU: Processor Core ID: 0
[ 0.252116] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.252118] CPU: L2 cache: 256K
[ 0.252120] CPU: L3 cache: 8192K
[ 0.252123] CPU 1/0x0 -> Node 1
[ 0.252137] CPU1: Thermal monitoring enabled (TM1)
[ 0.252140] CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 SHD:8
[ 0.252169] CPU1: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz stepping 05
[ 0.252890] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.273028] Booting processor 2 APIC 0x12 ip 0x6000
[ 0.283695] Initializing CPU#2
[ 0.363882] CPU: Physical Processor ID: 1
[ 0.363883] CPU: Processor Core ID: 1
[ 0.363885] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.363887] CPU: L2 cache: 256K
[ 0.363888] CPU: L3 cache: 8192K
[ 0.363890] CPU 2/0x12 -> Node 0
[ 0.363900] CPU2: Thermal monitoring enabled (TM1)
[ 0.363903] CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.363930] CPU2: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz stepping 05
[ 0.364654] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.384828] Booting processor 3 APIC 0x2 ip 0x6000
[ 0.395220] Initializing CPU#3
[ 0.475655] CPU: Physical Processor ID: 0
[ 0.475656] CPU: Processor Core ID: 1
[ 0.475659] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.475661] CPU: L2 cache: 256K
[ 0.475663] CPU: L3 cache: 8192K
[ 0.475665] CPU 3/0x2 -> Node 1
[ 0.475679] CPU3: Thermal monitoring enabled (TM1)
[ 0.475683] CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.475769] CPU3: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz stepping 05
[ 0.476490] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.496628] Booting processor 4 APIC 0x14 ip 0x6000
[ 0.506958] Initializing CPU#4
[ 0.587425] CPU: Physical Processor ID: 1
[ 0.587426] CPU: Processor Core ID: 2
[ 0.587428] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.587430] CPU: L2 cache: 256K
[ 0.587431] CPU: L3 cache: 8192K
[ 0.587433] CPU 4/0x14 -> Node 0
[ 0.587443] CPU4: Thermal monitoring enabled (TM1)
[ 0.587446] CPU 4 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.587528] CPU4: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz stepping 05
[ 0.588249] checking TSC synchronization [CPU#0 -> CPU#4]: passed.
[ 0.608417] Booting processor 5 APIC 0x4 ip 0x6000
[ 0.618810] Initializing CPU#5
[ 0.699198] CPU: Physical Processor ID: 0
[ 0.699199] CPU: Processor Core ID: 2
[ 0.699202] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.699204] CPU: L2 cache: 256K
[ 0.699206] CPU: L3 cache: 8192K
[ 0.699209] CPU 5/0x4 -> Node 1
[ 0.699222] CPU5: Thermal monitoring enabled (TM1)
[ 0.699226] CPU 5 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.699264] CPU5: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz stepping 05
[ 0.699986] checking TSC synchronization [CPU#0 -> CPU#5]: passed.
[ 0.720127] Booting processor 6 APIC 0x16 ip 0x6000
[ 0.730458] Initializing CPU#6
[ 0.810968] CPU: Physical Processor ID: 1
[ 0.810969] CPU: Processor Core ID: 3
[ 0.810971] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.810972] CPU: L2 cache: 256K
[ 0.810973] CPU: L3 cache: 8192K
[ 0.810976] CPU 6/0x16 -> Node 0
[ 0.810986] CPU6: Thermal monitoring enabled (TM1)
[ 0.810989] CPU 6 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.811037] CPU6: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz stepping 05
[ 0.811761] checking TSC synchronization [CPU#0 -> CPU#6]: passed.
[ 0.831933] Booting processor 7 APIC 0x6 ip 0x6000
[ 0.842326] Initializing CPU#7
[ 0.922741] CPU: Physical Processor ID: 0
[ 0.922742] CPU: Processor Core ID: 3
[ 0.922745] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.922747] CPU: L2 cache: 256K
[ 0.922749] CPU: L3 cache: 8192K
[ 0.922752] CPU 7/0x6 -> Node 1
[ 0.922765] CPU7: Thermal monitoring enabled (TM1)
[ 0.922769] CPU 7 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.922833] CPU7: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz stepping 05
[ 0.923558] checking TSC synchronization [CPU#0 -> CPU#7]: passed.
[ 0.943654] Brought up 8 CPUs
[ 0.943718] Total of 8 processors activated (36175.34 BogoMIPS).
[ 0.947304] CPU0 attaching sched-domain:
[ 0.947308] domain 0: span 0,2,4,6 level MC
[ 0.947310] groups: 0 2 4 6
[ 0.947314] domain 1: span 0-7 level NODE
[ 0.947316] groups: 0,2,4,6 (cpu_power = 4096) 1,3,5,7 (cpu_power = 4096)
[ 0.947324] CPU1 attaching sched-domain:
[ 0.947326] domain 0: span 1,3,5,7 level MC
[ 0.947327] groups: 1 3 5 7
[ 0.947331] domain 1: span 0-7 level NODE
[ 0.947332] groups: 1,3,5,7 (cpu_power = 4096) 0,2,4,6 (cpu_power = 4096)
[ 0.947338] CPU2 attaching sched-domain:
[ 0.947340] domain 0: span 0,2,4,6 level MC
[ 0.947341] groups: 2 4 6 0
[ 0.947345] domain 1: span 0-7 level NODE
[ 0.947346] groups: 0,2,4,6 (cpu_power = 4096) 1,3,5,7 (cpu_power = 4096)
[ 0.947351] CPU3 attaching sched-domain:
[ 0.947353] domain 0: span 1,3,5,7 level MC
[ 0.947355] groups: 3 5 7 1
[ 0.947358] domain 1: span 0-7 level NODE
[ 0.947360] groups: 1,3,5,7 (cpu_power = 4096) 0,2,4,6 (cpu_power = 4096)
[ 0.947365] CPU4 attaching sched-domain:
[ 0.947367] domain 0: span 0,2,4,6 level MC
[ 0.947368] groups: 4 6 0 2
[ 0.947372] domain 1: span 0-7 level NODE
[ 0.947373] groups: 0,2,4,6 (cpu_power = 4096) 1,3,5,7 (cpu_power = 4096)
[ 0.947379] CPU5 attaching sched-domain:
[ 0.947380] domain 0: span 1,3,5,7 level MC
[ 0.947382] groups: 5 7 1 3
[ 0.947385] domain 1: span 0-7 level NODE
[ 0.947387] groups: 1,3,5,7 (cpu_power = 4096) 0,2,4,6 (cpu_power = 4096)
[ 0.947392] CPU6 attaching sched-domain:
[ 0.947394] domain 0: span 0,2,4,6 level MC
[ 0.947395] groups: 6 0 2 4
[ 0.947399] domain 1: span 0-7 level NODE
[ 0.947401] groups: 0,2,4,6 (cpu_power = 4096) 1,3,5,7 (cpu_power = 4096)
[ 0.947406] CPU7 attaching sched-domain:
[ 0.947407] domain 0: span 1,3,5,7 level MC
[ 0.947409] groups: 7 1 3 5
[ 0.947412] domain 1: span 0-7 level NODE
[ 0.947414] groups: 1,3,5,7 (cpu_power = 4096) 0,2,4,6 (cpu_power = 4096)
[ 0.947894] devtmpfs: initialized
[ 0.952262] regulator: core version 0.5
[ 0.952387] NET: Registered protocol family 16
[ 0.952535] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.952620] ACPI: bus type pci registered
[ 0.952758] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.952828] PCI: MCFG area at e0000000 reserved in E820
[ 0.958063] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.958137] PCI: Using configuration type 1 for base access
[ 0.958794] bio: create slab <bio-0> at 0
[ 0.959374] ACPI: EC: Look up EC in DSDT
[ 0.961857] ACPI: BIOS _OSI(Linux) query ignored
[ 0.962035] ACPI: Interpreter enabled
[ 0.962099] ACPI: (supports S0 S4 S5)
[ 0.962301] ACPI: Using IOAPIC for interrupt routing
[ 0.966514] ACPI: No dock devices found.
[ 0.966987] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.967122] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.967192] pci 0000:00:00.0: PME# disabled
[ 0.967313] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.967383] pci 0000:00:01.0: PME# disabled
[ 0.967502] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.967570] pci 0000:00:03.0: PME# disabled
[ 0.967691] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.967760] pci 0000:00:07.0: PME# disabled
[ 0.967999] pci 0000:00:1a.0: reg 20 io port: [0xec40-0xec5f]
[ 0.968061] pci 0000:00:1a.1: reg 20 io port: [0xec60-0xec7f]
[ 0.968129] pci 0000:00:1a.7: reg 10 32bit mmio: [0xdf0ff800-0xdf0ffbff]
[ 0.968178] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.968249] pci 0000:00:1a.7: PME# disabled
[ 0.968364] pci 0000:00:1d.0: reg 20 io port: [0xec80-0xec9f]
[ 0.968426] pci 0000:00:1d.1: reg 20 io port: [0xeca0-0xecbf]
[ 0.968488] pci 0000:00:1d.2: reg 20 io port: [0xecc0-0xecdf]
[ 0.968549] pci 0000:00:1d.3: reg 20 io port: [0xece0-0xecff]
[ 0.968614] pci 0000:00:1d.7: reg 10 32bit mmio: [0xdf0ffc00-0xdf0fffff]
[ 0.968663] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.968733] pci 0000:00:1d.7: PME# disabled
[ 0.968907] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.968993] pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
[ 0.969064] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)
[ 0.969150] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f)
[ 0.969235] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 00e0 (mask 000f)
[ 0.969367] pci 0000:00:1f.2: reg 10 io port: [0xe8e0-0xe8e7]
[ 0.969372] pci 0000:00:1f.2: reg 14 io port: [0xe8d0-0xe8d3]
[ 0.969377] pci 0000:00:1f.2: reg 18 io port: [0xe8e8-0xe8ef]
[ 0.969382] pci 0000:00:1f.2: reg 1c io port: [0xe8d4-0xe8d7]
[ 0.969386] pci 0000:00:1f.2: reg 20 io port: [0xec00-0xec0f]
[ 0.969391] pci 0000:00:1f.2: reg 24 io port: [0xec10-0xec1f]
[ 0.969442] pci 0000:00:1f.5: reg 10 io port: [0xe8f0-0xe8f7]
[ 0.969447] pci 0000:00:1f.5: reg 14 io port: [0xe8d8-0xe8db]
[ 0.969452] pci 0000:00:1f.5: reg 18 io port: [0xe8f8-0xe8ff]
[ 0.969456] pci 0000:00:1f.5: reg 1c io port: [0xe8dc-0xe8df]
[ 0.969461] pci 0000:00:1f.5: reg 20 io port: [0xec20-0xec2f]
[ 0.969466] pci 0000:00:1f.5: reg 24 io port: [0xec30-0xec3f]
[ 0.969533] pci 0000:01:00.0: reg 10 64bit mmio: [0xda000000-0xdbffffff]
[ 0.969580] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.969649] pci 0000:01:00.0: PME# disabled
[ 0.969759] pci 0000:01:00.1: reg 10 64bit mmio: [0xdc000000-0xddffffff]
[ 0.969805] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
[ 0.969876] pci 0000:01:00.1: PME# disabled
[ 0.969992] pci 0000:00:01.0: bridge 32bit mmio: [0xda000000-0xddffffff]
[ 0.970043] pci 0000:03:00.0: reg 10 64bit mmio: [0xdf180000-0xdf1bffff]
[ 0.970048] pci 0000:03:00.0: reg 18 io port: [0xfc00-0xfcff]
[ 0.970057] pci 0000:03:00.0: reg 1c 64bit mmio: [0xdf1c0000-0xdf1fffff]
[ 0.970066] pci 0000:03:00.0: reg 30 32bit mmio pref: [0xdf100000-0xdf107fff]
[ 0.970092] pci 0000:03:00.0: supports D1
[ 0.970109] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.970212] pci 0000:00:07.0: bridge io port: [0xf000-0xffff]
[ 0.970215] pci 0000:00:07.0: bridge 32bit mmio: [0xdf100000-0xdf1fffff]
[ 0.970251] pci 0000:04:03.0: reg 10 32bit mmio pref: [0xd9800000-0xd9ffffff]
[ 0.970257] pci 0000:04:03.0: reg 14 32bit mmio: [0xde7fc000-0xde7fffff]
[ 0.970263] pci 0000:04:03.0: reg 18 32bit mmio: [0xde800000-0xdeffffff]
[ 0.970282] pci 0000:04:03.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[ 0.970338] pci 0000:00:1e.0: transparent bridge
[ 0.970407] pci 0000:00:1e.0: bridge 32bit mmio: [0xde000000-0xdeffffff]
[ 0.970412] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xd9800000-0xd9ffffff]
[ 0.970428] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.970913] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 0.971004] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 0.971093] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]
[ 0.971189] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT]
[ 0.973444] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 14 *15)
[ 0.974083] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 *14 15)
[ 0.974725] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 0.975361] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 0.975999] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 0.981664] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 *6 7 10 11 14 15)
[ 0.982299] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 0.982937] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 *14 15)
[ 0.983579] vgaarb: device added: PCI:0000:04:03.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.983664] vgaarb: loaded
[ 0.983768] PCI: Using ACPI for IRQ routing
[ 0.983975] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.984255] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 1.003556] Switching to clocksource tsc
[ 1.005286] pnp: PnP ACPI init
[ 1.005372] ACPI: bus type pnp registered
[ 1.009630] pnp: PnP ACPI: found 12 devices
[ 1.009698] ACPI: ACPI bus type pnp unregistered
[ 1.009778] system 00:07: ioport range 0x800-0x87f has been reserved
[ 1.009850] system 00:07: ioport range 0x880-0x8ff could not be reserved
[ 1.009922] system 00:07: ioport range 0x900-0x91f has been reserved
[ 1.009993] system 00:07: ioport range 0x920-0x923 has been reserved
[ 1.010064] system 00:07: ioport range 0x924-0x924 has been reserved
[ 1.010135] system 00:07: ioport range 0xc00-0xc7f has been reserved
[ 1.010207] system 00:07: ioport range 0xca0-0xca7 has been reserved
[ 1.010278] system 00:07: ioport range 0xca9-0xcab has been reserved
[ 1.010349] system 00:07: ioport range 0xcad-0xcaf has been reserved
[ 1.010423] system 00:08: ioport range 0xca8-0xca8 has been reserved
[ 1.010495] system 00:08: ioport range 0xcac-0xcac has been reserved
[ 1.010569] system 00:09: iomem range 0xe0000000-0xefffffff has been reserved
[ 1.010645] system 00:0b: iomem range 0xfed90000-0xfed91fff has been reserved
[ 1.015675] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 1.015746] pci 0000:00:01.0: IO window: disabled
[ 1.015816] pci 0000:00:01.0: MEM window: 0xda000000-0xddffffff
[ 1.015887] pci 0000:00:01.0: PREFETCH window: disabled
[ 1.015959] pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
[ 1.016029] pci 0000:00:03.0: IO window: disabled
[ 1.016099] pci 0000:00:03.0: MEM window: disabled
[ 1.016168] pci 0000:00:03.0: PREFETCH window: disabled
[ 1.016240] pci 0000:00:07.0: PCI bridge, secondary bus 0000:03
[ 1.016311] pci 0000:00:07.0: IO window: 0xf000-0xffff
[ 1.016382] pci 0000:00:07.0: MEM window: 0xdf100000-0xdf1fffff
[ 1.016454] pci 0000:00:07.0: PREFETCH window: disabled
[ 1.016528] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 1.016597] pci 0000:00:1e.0: IO window: disabled
[ 1.016668] pci 0000:00:1e.0: MEM window: 0xde000000-0xdeffffff
[ 1.016740] pci 0000:00:1e.0: PREFETCH window: 0x000000d9800000-0x000000d9ffffff
[ 1.016838] alloc irq_desc for 53 on node -1
[ 1.016840] alloc kstat_irqs on node -1
[ 1.016847] pci 0000:00:01.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[ 1.016921] pci 0000:00:01.0: setting latency timer to 64
[ 1.016929] pci 0000:00:03.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[ 1.017001] pci 0000:00:03.0: setting latency timer to 64
[ 1.017009] pci 0000:00:07.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[ 1.017082] pci 0000:00:07.0: setting latency timer to 64
[ 1.017089] pci 0000:00:1e.0: setting latency timer to 64
[ 1.017093] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 1.017097] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 1.017100] pci_bus 0000:01: resource 1 mem: [0xda000000-0xddffffff]
[ 1.017103] pci_bus 0000:03: resource 0 io: [0xf000-0xffff]
[ 1.017105] pci_bus 0000:03: resource 1 mem: [0xdf100000-0xdf1fffff]
[ 1.017109] pci_bus 0000:04: resource 1 mem: [0xde000000-0xdeffffff]
[ 1.017111] pci_bus 0000:04: resource 2 pref mem [0xd9800000-0xd9ffffff]
[ 1.017114] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
[ 1.017117] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 1.017157] NET: Registered protocol family 2
[ 1.017529] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 1.018906] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.021075] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.021418] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.021489] TCP reno registered
[ 1.021805] NET: Registered protocol family 1
[ 1.035524] pci 0000:04:03.0: Boot video device
[ 1.035569] Unpacking initramfs...
[ 1.317820] Freeing initrd memory: 9830k freed
[ 1.320076] DMAR: Device scope device [0000:00:1a.02] not found
[ 1.320157] DMAR: Device scope device [0000:00:1a.02] not found
[ 1.320234] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.320306] DMA: Placing 64MB software IO TLB between ffff8800055fe000 - ffff8800095fe000
[ 1.320393] DMA: software IO TLB at phys 0x55fe000 - 0x95fe000
[ 1.321257] audit: initializing netlink socket (disabled)
[ 1.321335] type=2000 audit(1290699108.104:1): initialized
[ 1.326308] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.328022] VFS: Disk quotas dquot_6.5.2
[ 1.328149] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.328325] msgmni has been set to 15985
[ 1.328709] alg: No test for stdrng (krng)
[ 1.328825] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.328912] io scheduler noop registered
[ 1.328978] io scheduler anticipatory registered
[ 1.329045] io scheduler deadline registered
[ 1.329147] io scheduler cfq registered (default)
[ 1.329334] alloc irq_desc for 56 on node -1
[ 1.329337] alloc kstat_irqs on node -1
[ 1.329347] pcieport 0000:00:01.0: irq 56 for MSI/MSI-X
[ 1.329354] pcieport 0000:00:01.0: setting latency timer to 64
[ 1.329463] alloc irq_desc for 57 on node -1
[ 1.329465] alloc kstat_irqs on node -1
[ 1.329472] pcieport 0000:00:03.0: irq 57 for MSI/MSI-X
[ 1.329479] pcieport 0000:00:03.0: setting latency timer to 64
[ 1.329587] alloc irq_desc for 58 on node -1
[ 1.329589] alloc kstat_irqs on node -1
[ 1.329596] pcieport 0000:00:07.0: irq 58 for MSI/MSI-X
[ 1.329603] pcieport 0000:00:07.0: setting latency timer to 64
[ 1.329974] aer 0000:00:01.0:pcie02: service driver aer loaded
[ 1.330009] aer 0000:00:03.0:pcie02: service driver aer loaded
[ 1.330043] aer 0000:00:07.0:pcie02: service driver aer loaded
[ 1.331530] Linux agpgart interface v0.103
[ 1.331635] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.331805] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.331976] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.332295] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.332497] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.332748] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 1.332894] PNP: No PS/2 controller found. Probing ports directly.
[ 1.335641] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.335714] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.335880] mice: PS/2 mouse device common for all mice
[ 1.335987] rtc_cmos 00:04: RTC can wake from S4
[ 1.336092] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.336186] rtc0: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 1.336268] cpuidle: using governor ladder
[ 1.336333] cpuidle: using governor menu
[ 1.336402] No iBFT detected.
[ 1.336875] TCP cubic registered
[ 1.337065] NET: Registered protocol family 10
[ 1.337841] lo: Disabled Privacy Extensions
[ 1.338215] Mobile IPv6
[ 1.338279] NET: Registered protocol family 17
[ 1.338421] PM: Resume from disk failed.
[ 1.338432] registered taskstats version 1
[ 1.339079] rtc_cmos 00:04: setting system clock to 2010-11-25 15:31:48 UTC (1290699108)
[ 1.339198] Initalizing network drop monitor service
[ 1.339306] Freeing unused kernel memory: 596k freed
[ 1.339518] Write protecting the kernel read-only data: 4324k
[ 1.355149] udev[117]: starting version 163
[ 1.364521] Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.2 (Aug 21, 2009)
[ 1.364632] alloc irq_desc for 36 on node -1
[ 1.364634] alloc kstat_irqs on node -1
[ 1.364644] bnx2 0000:01:00.0: PCI INT A -> GSI 36 (level, low) -> IRQ 36
[ 1.364720] bnx2 0000:01:00.0: setting latency timer to 64
[ 1.364854] bnx2 0000:01:00.0: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw
[ 1.380845] SCSI subsystem initialized
[ 1.385855] bnx2 0000:01:00.0: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw
[ 1.389203] eth0: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem da000000, IRQ 36, node addr a4:ba:db:47:2a:de
[ 1.389334] alloc irq_desc for 48 on node -1
[ 1.389337] alloc kstat_irqs on node -1
[ 1.389346] bnx2 0000:01:00.1: PCI INT B -> GSI 48 (level, low) -> IRQ 48
[ 1.389423] bnx2 0000:01:00.1: setting latency timer to 64
[ 1.389559] bnx2 0000:01:00.1: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw
[ 1.390809] usbcore: registered new interface driver usbfs
[ 1.390899] usbcore: registered new interface driver hub
[ 1.391050] usbcore: registered new device driver usb
[ 1.392271] bnx2 0000:01:00.1: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw
[ 1.395671] eth1: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem dc000000, IRQ 48, node addr a4:ba:db:47:2a:df
[ 1.408572] libata version 3.00 loaded.
[ 1.410154] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.410247] alloc irq_desc for 19 on node -1
[ 1.410249] alloc kstat_irqs on node -1
[ 1.410256] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 1.410356] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.410359] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.410450] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.410566] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.414516] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 1.414533] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xdf0ff800
[ 1.415604] megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
[ 1.415695] megasas: 0x1000:0x0060:0x1028:0x1f0b: bus 3:slot 0:func 0
[ 1.415829] alloc irq_desc for 38 on node -1
[ 1.415831] alloc kstat_irqs on node -1
[ 1.415840] megaraid_sas 0000:03:00.0: PCI INT A -> GSI 38 (level, low) -> IRQ 38
[ 1.415935] megaraid_sas 0000:03:00.0: setting latency timer to 64
[ 1.416012] megasas: FW now in Ready state
[ 1.426964] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.427061] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.427133] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.427219] usb usb1: Product: EHCI Host Controller
[ 1.427286] usb usb1: Manufacturer: Linux 2.6.32-5-xen-amd64 ehci_hcd
[ 1.427357] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.427502] usb usb1: configuration #1 chosen from 1 choice
[ 1.427601] hub 1-0:1.0: USB hub found
[ 1.427672] hub 1-0:1.0: 4 ports detected
[ 1.427789] ata_piix 0000:00:1f.2: version 2.13
[ 1.427801] alloc irq_desc for 23 on node -1
[ 1.427803] alloc kstat_irqs on node -1
[ 1.427810] ata_piix 0000:00:1f.2: PCI INT C -> GSI 23 (level, low) -> IRQ 23
[ 1.427885] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.455328] scsi0 : LSI SAS based MegaRAID driver
[ 1.456421] scsi 0:0:0:0: Direct-Access SEAGATE ST3146356SS HS10 PQ: 0 ANSI: 5
[ 1.457359] scsi 0:0:1:0: Direct-Access SEAGATE ST3146356SS HS10 PQ: 0 ANSI: 5
[ 1.458290] scsi 0:0:2:0: Direct-Access SEAGATE ST3146356SS HS10 PQ: 0 ANSI: 5
[ 1.534417] scsi 0:0:32:0: Enclosure DP BACKPLANE 1.07 PQ: 0 ANSI: 5
[ 1.545376] scsi 0:2:0:0: Direct-Access DELL PERC 6/i Adapter 1.22 PQ: 0 ANSI: 5
[ 1.561796] sd 0:2:0:0: [sda] 285474816 512-byte logical blocks: (146 GB/136 GiB)
[ 1.561972] sd 0:2:0:0: [sda] Write Protect is off
[ 1.562041] sd 0:2:0:0: [sda] Mode Sense: 1f 00 10 08
[ 1.562095] sd 0:2:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 1.562404] sda: sda1 sda2 sda3
[ 1.582689] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.582751] scsi1 : ata_piix
[ 1.582889] scsi2 : ata_piix
[ 1.582995] ata1: SATA max UDMA/133 cmd 0xe8e0 ctl 0xe8d0 bmdma 0xec00 irq 23
[ 1.583071] ata2: SATA max UDMA/133 cmd 0xe8e8 ctl 0xe8d4 bmdma 0xec08 irq 23
[ 1.583172] alloc irq_desc for 21 on node -1
[ 1.583175] alloc kstat_irqs on node -1
[ 1.583182] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 1.583283] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.583287] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.583365] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.583480] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.587418] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.587433] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xdf0ffc00
[ 1.589214] sd 0:2:0:0: [sda] Attached SCSI disk
[ 1.602882] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.602968] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.603040] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.603126] usb usb2: Product: EHCI Host Controller
[ 1.603194] usb usb2: Manufacturer: Linux 2.6.32-5-xen-amd64 ehci_hcd
[ 1.603264] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.603399] usb usb2: configuration #1 chosen from 1 choice
[ 1.603501] hub 2-0:1.0: USB hub found
[ 1.603571] hub 2-0:1.0: 4 ports detected
[ 1.603695] alloc irq_desc for 22 on node -1
[ 1.603698] alloc kstat_irqs on node -1
[ 1.603704] ata_piix 0000:00:1f.5: PCI INT D -> GSI 22 (level, low) -> IRQ 22
[ 1.603779] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.611862] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.716515] ses 0:0:32:0: Attached Enclosure device
[ 1.738381] usb 1-3: new high speed USB device using ehci_hcd and address 2
[ 1.758354] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 1.758413] scsi3 : ata_piix
[ 1.758543] scsi4 : ata_piix
[ 1.758647] ata3: SATA max UDMA/133 cmd 0xe8f0 ctl 0xe8d8 bmdma 0xec20 irq 22
[ 1.758721] ata4: SATA max UDMA/133 cmd 0xe8f8 ctl 0xe8dc bmdma 0xec28 irq 22
[ 1.758836] alloc irq_desc for 17 on node -1
[ 1.758839] alloc kstat_irqs on node -1
[ 1.758847] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.758927] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.758931] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.759011] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.759134] uhci_hcd 0000:00:1a.0: irq 17, io base 0x0000ec40
[ 1.759243] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.759315] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.759401] usb usb3: Product: UHCI Host Controller
[ 1.759468] usb usb3: Manufacturer: Linux 2.6.32-5-xen-amd64 uhci_hcd
[ 1.759539] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.759680] usb usb3: configuration #1 chosen from 1 choice
[ 1.759781] hub 3-0:1.0: USB hub found
[ 1.759853] hub 3-0:1.0: 2 ports detected
[ 1.759968] alloc irq_desc for 18 on node -1
[ 1.759970] alloc kstat_irqs on node -1
[ 1.759976] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 1.760052] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.760056] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.760130] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.760258] uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000ec60
[ 1.760357] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.760429] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.760515] usb usb4: Product: UHCI Host Controller
[ 1.760582] usb usb4: Manufacturer: Linux 2.6.32-5-xen-amd64 uhci_hcd
[ 1.760652] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.760777] usb usb4: configuration #1 chosen from 1 choice
[ 1.760874] hub 4-0:1.0: USB hub found
[ 1.760943] hub 4-0:1.0: 2 ports detected
[ 1.761051] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 1.761128] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.761131] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.761204] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 1.761313] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ec80
[ 1.761411] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.761483] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.761569] usb usb5: Product: UHCI Host Controller
[ 1.761636] usb usb5: Manufacturer: Linux 2.6.32-5-xen-amd64 uhci_hcd
[ 1.761707] usb usb5: SerialNumber: 0000:00:1d.0
[ 1.761831] usb usb5: configuration #1 chosen from 1 choice
[ 1.761929] hub 5-0:1.0: USB hub found
[ 1.761998] hub 5-0:1.0: 2 ports detected
[ 1.762107] alloc irq_desc for 20 on node -1
[ 1.762109] alloc kstat_irqs on node -1
[ 1.762115] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 1.762191] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.762194] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.762268] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 1.762382] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000eca0
[ 1.762483] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.762555] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.762647] usb usb6: Product: UHCI Host Controller
[ 1.762714] usb usb6: Manufacturer: Linux 2.6.32-5-xen-amd64 uhci_hcd
[ 1.762784] usb usb6: SerialNumber: 0000:00:1d.1
[ 1.762911] usb usb6: configuration #1 chosen from 1 choice
[ 1.763008] hub 6-0:1.0: USB hub found
[ 1.763078] hub 6-0:1.0: 2 ports detected
[ 1.763190] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 1.763266] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.763270] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.763343] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 1.763452] uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000ecc0
[ 1.763553] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.763624] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.763710] usb usb7: Product: UHCI Host Controller
[ 1.763778] usb usb7: Manufacturer: Linux 2.6.32-5-xen-amd64 uhci_hcd
[ 1.763848] usb usb7: SerialNumber: 0000:00:1d.2
[ 1.763972] usb usb7: configuration #1 chosen from 1 choice
[ 1.764070] hub 7-0:1.0: USB hub found
[ 1.764140] hub 7-0:1.0: 2 ports detected
[ 1.764248] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 20 (level, low) -> IRQ 20
[ 1.764325] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.764328] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.764415] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[ 1.764524] uhci_hcd 0000:00:1d.3: irq 20, io base 0x0000ece0
[ 1.764622] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.764694] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.764780] usb usb8: Product: UHCI Host Controller
[ 1.764848] usb usb8: Manufacturer: Linux 2.6.32-5-xen-amd64 uhci_hcd
[ 1.764918] usb usb8: SerialNumber: 0000:00:1d.3
[ 1.765043] usb usb8: configuration #1 chosen from 1 choice
[ 1.765139] hub 8-0:1.0: USB hub found
[ 1.765209] hub 8-0:1.0: 2 ports detected
[ 1.878474] usb 1-3: New USB device found, idVendor=0424, idProduct=2514
[ 1.878547] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.878688] usb 1-3: configuration #1 chosen from 1 choice
[ 1.878875] hub 1-3:1.0: USB hub found
[ 1.878969] hub 1-3:1.0: 4 ports detected
[ 2.233442] usb 5-2: new full speed USB device using uhci_hcd and address 2
[ 2.233486] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.257624] ata3.00: ATAPI: TSSTcorp DVD+/-RW TS-L633C, D250, max UDMA/100
[ 2.257709] ata3.00: applying bridge limits
[ 2.289586] ata3.00: configured for UDMA/100
[ 2.460027] usb 5-2: New USB device found, idVendor=0624, idProduct=0248
[ 2.460100] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.460172] usb 5-2: Product: USB Composite Device-0
[ 2.460240] usb 5-2: Manufacturer: Avocent
[ 2.460306] usb 5-2: SerialNumber: 20080519
[ 2.460436] usb 5-2: configuration #1 chosen from 1 choice
[ 2.480203] usbcore: registered new interface driver hiddev
[ 2.484163] input: Avocent USB Composite Device-0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input1
[ 2.484297] generic-usb 0003:0624:0248.0001: input,hidraw0: USB HID v1.00 Keyboard [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2/input0
[ 2.488108] input: Avocent USB Composite Device-0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.1/input/input2
[ 2.488258] generic-usb 0003:0624:0248.0002: input,hidraw1: USB HID v1.00 Mouse [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2/input1
[ 2.488370] usbcore: registered new interface driver usbhid
[ 2.488440] usbhid: v2.6:USB HID core driver
[ 2.608735] ata2.00: failed to resume link (SControl 0)
[ 2.784401] ata4: failed to resume link (SControl 0)
[ 2.795177] ata4: SATA link down (SStatus 4 SControl 0)
[ 2.932121] ata1.01: failed to resume link (SControl 0)
[ 2.942924] ata1.00: SATA link down (SStatus 0 SControl 300)
[ 2.943004] ata1.01: SATA link down (SStatus 0 SControl 0)
[ 3.634792] ata2.01: failed to resume link (SControl 0)
[ 3.645569] ata2.00: SATA link down (SStatus 0 SControl 0)
[ 3.645649] ata2.01: SATA link down (SStatus 0 SControl 0)
[ 3.649026] scsi 3:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L633C D250 PQ: 0 ANSI: 5
[ 3.665183] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.665272] Uniform CD-ROM driver Revision: 3.20
[ 3.665433] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 3.668796] ses 0:0:32:0: Attached scsi generic sg0 type 13
[ 3.668902] sd 0:2:0:0: Attached scsi generic sg1 type 0
[ 3.669008] sr 3:0:0:0: Attached scsi generic sg2 type 5
[ 3.826318] device-mapper: uevent: version 1.0.3
[ 3.826533] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 3.831583] PM: Starting manual resume from disk
[ 3.831666] PM: Resume from partition 8:2
[ 3.831668] PM: Checking hibernation image.
[ 3.831960] PM: Error -22 checking image file
[ 3.831963] PM: Resume from disk failed.
[ 3.848390] kjournald starting. Commit interval 5 seconds
[ 3.848395] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.445451] udev[402]: starting version 163
[ 4.560445] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 4.621710] Monitor-Mwait will be used to enter C-1 state
[ 4.621747] Monitor-Mwait will be used to enter C-3 state
[ 4.621833] processor LNXCPU:00: registered as cooling_device0
[ 4.622176] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 4.622531] processor LNXCPU:01: registered as cooling_device1
[ 4.624173] processor LNXCPU:02: registered as cooling_device2
[ 4.625570] processor LNXCPU:03: registered as cooling_device3
[ 4.625708] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 4.625833] ACPI: Power Button [PWRF]
[ 4.626532] processor LNXCPU:04: registered as cooling_device4
[ 4.627962] ACPI Error: SMBus or IPMI write requires Buffer of length 42, found length 20 (20090903/exfield-286)
[ 4.627970] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._GHL] (Node ffff88022fc0ec40), AE_AML_BUFFER_LIMIT
[ 4.627994] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._PMC] (Node ffff88022fc0ebc0), AE_AML_BUFFER_LIMIT
[ 4.628018] ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMC (20090903/power_meter-772)
[ 4.632736] processor LNXCPU:05: registered as cooling_device5
[ 4.633446] processor LNXCPU:06: registered as cooling_device6
[ 4.634163] processor LNXCPU:07: registered as cooling_device7
[ 4.850294] Error: Driver 'pcspkr' is already registered, aborting...
[ 5.199095] Adding 979956k swap on /dev/sda2. Priority:-1 extents:1 across:979956k
[ 5.264220] EXT3 FS on sda1, internal journal
[ 5.343542] loop: module loaded
[ 5.827455] alloc irq_desc for 59 on node -1
[ 5.827459] alloc kstat_irqs on node -1
[ 5.827468] bnx2 0000:01:00.0: irq 59 for MSI/MSI-X
[ 5.827470] alloc irq_desc for 60 on node -1
[ 5.827472] alloc kstat_irqs on node -1
[ 5.827476] bnx2 0000:01:00.0: irq 60 for MSI/MSI-X
[ 5.827478] alloc irq_desc for 61 on node -1
[ 5.827480] alloc kstat_irqs on node -1
[ 5.827484] bnx2 0000:01:00.0: irq 61 for MSI/MSI-X
[ 5.827486] alloc irq_desc for 62 on node -1
[ 5.827488] alloc kstat_irqs on node -1
[ 5.827491] bnx2 0000:01:00.0: irq 62 for MSI/MSI-X
[ 5.827493] alloc irq_desc for 63 on node -1
[ 5.827495] alloc kstat_irqs on node -1
[ 5.827499] bnx2 0000:01:00.0: irq 63 for MSI/MSI-X
[ 5.827501] alloc irq_desc for 64 on node -1
[ 5.827503] alloc kstat_irqs on node -1
[ 5.827506] bnx2 0000:01:00.0: irq 64 for MSI/MSI-X
[ 5.827508] alloc irq_desc for 65 on node -1
[ 5.827511] alloc kstat_irqs on node -1
[ 5.827514] bnx2 0000:01:00.0: irq 65 for MSI/MSI-X
[ 5.827516] alloc irq_desc for 66 on node -1
[ 5.827520] alloc kstat_irqs on node -1
[ 5.827524] bnx2 0000:01:00.0: irq 66 for MSI/MSI-X
[ 5.827526] alloc irq_desc for 67 on node -1
[ 5.827528] alloc kstat_irqs on node -1
[ 5.827531] bnx2 0000:01:00.0: irq 67 for MSI/MSI-X
[ 5.880594] bnx2: eth0: using MSIX
[ 5.881894] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9.022149] bnx2: eth0 NIC Copper Link is Up, 1000 Mbps full duplex
[ 9.023524] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 19.744417] eth0: no IPv6 routers present
(XEN) Xen version 4.0.1 (Debian 4.0.1-1) (waldi@debian.org) (gcc version 4.4.5 20100824 (prerelease) (Debian 4.4.4-11) ) Fri Sep 3 15:38:12 UTC 2010
(XEN) Bootloader: GNU GRUB 0.97
(XEN) Command line: com2=57600,8n1,0x2f8,3 console=com2 dom0_mem=1024M
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds
(XEN) EDID info not retrieved because no DDC retrieval method detected
(XEN) Disc information:
(XEN) Found 1 MBR signatures
(XEN) Found 1 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 00000000000a0000 (usable)
(XEN) 0000000000100000 - 00000000cf679000 (usable)
(XEN) 00000000cf679000 - 00000000cf68f000 (reserved)
(XEN) 00000000cf68f000 - 00000000cf6ce000 (ACPI data)
(XEN) 00000000cf6ce000 - 00000000d0000000 (reserved)
(XEN) 00000000e0000000 - 00000000f0000000 (reserved)
(XEN) 00000000fe000000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000000230000000 (usable)
(XEN) ACPI: RSDP 000F09E0, 0024 (r2 DELL )
(XEN) ACPI: XSDT 000F0AE4, 009C (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: FACP CF6B3F9C, 00F4 (r3 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: DSDT CF68F000, 3B39 (r1 DELL PE_SC3 1 INTL 20050624)
(XEN) ACPI: FACS CF6B6000, 0040
(XEN) ACPI: APIC CF6B3478, 015E (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: SPCR CF6B35D8, 0050 (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: HPET CF6B362C, 0038 (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: DMAR CF6B3668, 01B0 (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: MCFG CF6B38C4, 003C (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: WD__ CF6B3904, 0134 (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: SLIC CF6B3A3C, 0024 (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: ERST CF692CBC, 0270 (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: HEST CF692F2C, 03A8 (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: BERT CF692B3C, 0030 (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: EINJ CF692B6C, 0150 (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: SRAT CF6B3BC0, 0370 (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: TCPA CF6B3F34, 0064 (r2 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: SSDT CF6B7000, 2104 (r1 INTEL PPM RCM 80000001 INTL 20061109)
(XEN) System RAM: 8182MB (8378468kB)
(XEN) Reserving non-aligned node boundary @ mfn 0x130000
(XEN) Domain heap initialised DMA width 30 bits
(XEN) Processor #16 7:10 APIC version 21
(XEN) Processor #0 7:10 APIC version 21
(XEN) Processor #18 7:10 APIC version 21
(XEN) Processor #2 7:10 APIC version 21
(XEN) Processor #20 7:10 APIC version 21
(XEN) Processor #4 7:10 APIC version 21
(XEN) Processor #22 7:10 APIC version 21
(XEN) Processor #6 7:10 APIC version 21
(XEN) IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
(XEN) IOAPIC[1]: apic_id 1, version 32, address 0xfec80000, GSI 32-55
(XEN) Enabling APIC mode: Flat. Using 2 I/O APICs
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 2261.087 MHz processor.
(XEN) Initing memory sharing.
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Extended Page Tables (EPT)
(XEN) - Virtual-Processor Identifiers (VPID)
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) EPT supports 2MB super page.
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging detected.
(XEN) Intel VT-d Snoop Control supported.
(XEN) Intel VT-d DMA Passthrough not supported.
(XEN) Intel VT-d Queued Invalidation supported.
(XEN) Intel VT-d Interrupt Remapping not supported.
(XEN) I/O virtualisation enabled
(XEN) - Dom0 mode: Relaxed
(XEN) Total of 8 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) TSC is reliable, synchronization unnecessary
(XEN) Platform timer is 14.318MHz HPET
�(XEN) Allocated console ring of 16 KiB.
(XEN) Brought up 8 CPUs
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x16b5000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000224000000->0000000228000000 (245760 pages to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff81000000->ffffffff816b5000
(XEN) Init. ramdisk: ffffffff816b5000->ffffffff83244e00
(XEN) Phys-Mach map: ffffffff83245000->ffffffff83445000
(XEN) Start info: ffffffff83445000->ffffffff834454b4
(XEN) Page tables: ffffffff83446000->ffffffff83465000
(XEN) Boot stack: ffffffff83465000->ffffffff83466000
(XEN) TOTAL: ffffffff80000000->ffffffff83800000
(XEN) ENTRY ADDRESS: ffffffff81506200
(XEN) Dom0 has maximum 8 VCPUs
(XEN) Scrubbing Free RAM: ....................................................................done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: Errors and warnings
(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 176kB init memory.
mapping kernel into physical memory
Xen: setup ISA identity maps
about to get started...
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-xen-amd64 (Debian 2.6.32-27) (maks@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Sat Oct 30 17:04:10 UTC 2010
[ 0.000000] Command line: root=/dev/sda1 console=hvc0 nomodeset
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] released 0 pages of unused memory
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 0000000040000000 (usable)
[ 0.000000] Xen: 00000000cf679000 - 00000000cf68f000 (reserved)
[ 0.000000] Xen: 00000000cf68f000 - 00000000cf6ce000 (ACPI data)
[ 0.000000] Xen: 00000000cf6ce000 - 00000000d0000000 (reserved)
[ 0.000000] Xen: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] Xen: 00000000fe000000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.6 present.
[ 0.000000] last_pfn = 0x40000 max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106
[ 0.000000] init_memory_mapping: 0000000000000000-0000000040000000
[ 0.000000] RAMDISK: 016b5000 - 03244e00
[ 0.000000] ACPI: RSDP 00000000000f09e0 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 00000000000f0ae4 0009C (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: FACP 00000000cf6b3f9c 000F4 (v03 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: DSDT 00000000cf68f000 03B39 (v01 DELL PE_SC3 00000001 INTL 20050624)
[ 0.000000] ACPI: FACS 00000000cf6b6000 00040
[ 0.000000] ACPI: APIC 00000000cf6b3478 0015E (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SPCR 00000000cf6b35d8 00050 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: HPET 00000000cf6b362c 00038 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: XMAR 00000000cf6b3668 001B0 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: MCFG 00000000cf6b38c4 0003C (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: WD__ 00000000cf6b3904 00134 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SLIC 00000000cf6b3a3c 00024 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: ERST 00000000cf692cbc 00270 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: HEST 00000000cf692f2c 003A8 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: BERT 00000000cf692b3c 00030 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: EINJ 00000000cf692b6c 00150 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SRAT 00000000cf6b3bc0 00370 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: TCPA 00000000cf6b3f34 00064 (v02 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SSDT 00000000cf6b7000 02104 (v01 INTEL PPM RCM 80000001 INTL 20061109)
[ 0.000000] SRAT: PXM 1 -> APIC 16 -> Node 0
[ 0.000000] SRAT: PXM 2 -> APIC 0 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 18 -> Node 0
[ 0.000000] SRAT: PXM 2 -> APIC 2 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 20 -> Node 0
[ 0.000000] SRAT: PXM 2 -> APIC 4 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 22 -> Node 0
[ 0.000000] SRAT: PXM 2 -> APIC 6 -> Node 1
[ 0.000000] SRAT: Node 1 PXM 2 0-d0000000
[ 0.000000] SRAT: Node 1 PXM 2 100000000-130000000
[ 0.000000] SRAT: Node 0 PXM 1 130000000-230000000
[ 0.000000] Bootmem setup node 1 0000000000000000-0000000040000000
[ 0.000000] NODE_DATA [0000000000008000 - 000000000000ffff]
[ 0.000000] bootmap [0000000000010000 - 0000000000017fff] pages 8
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0040000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0003446000 - 0003465000] XEN PAGETABLES ==> [0003446000 - 0003465000]
[ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #3 [0001000000 - 0001694994] TEXT DATA BSS ==> [0001000000 - 0001694994]
[ 0.000000] #4 [00016b5000 - 0003244e00] RAMDISK ==> [00016b5000 - 0003244e00]
[ 0.000000] #5 [0003245000 - 0003446000] XEN START INFO ==> [0003245000 - 0003446000]
[ 0.000000] #6 [0001695000 - 000169532d] BRK ==> [0001695000 - 000169532d]
[ 0.000000] #7 [0000100000 - 00002e0000] PGTABLE ==> [0000100000 - 00002e0000]
[ 0.000000] found SMP MP-table at [ffff8800000fe710] fe710
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 1: 0x00000000 -> 0x000000a0
[ 0.000000] 1: 0x00000100 -> 0x00040000
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x28] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x29] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x2a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x2b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x2c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x2d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x2e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x2f] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x30] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x31] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x32] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x33] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x34] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x35] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x36] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x37] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0x38] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x39] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x3a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x3b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x3c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x3d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x3e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x20] lapic_id[0x3f] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 0, address 0xfec00000, GSI 0-0
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec80000] gsi_base[32])
[ 0.000000] IOAPIC[1]: apic_id 1, version 0, address 0xfec80000, GSI 32-32
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:8f679000)
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.0.1 (preserve-AD) (dom0)
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88000349b000 s90328 r8192 d24360 u122880
[ 0.000000] pcpu-alloc: s90328 r8192 d24360 u122880 alloc=30*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[ 3.107149] Xen: using vcpu_info placement
[ 3.107154] Built 1 zonelists in Node order, mobility grouping on. Total pages: 257981
[ 3.107156] Policy zone: DMA32
[ 3.107158] Kernel command line: root=/dev/sda1 console=hvc0 nomodeset
[ 3.107181] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 3.107480] Initializing CPU#0
[ 3.115945] DMA: Placing 64MB software IO TLB between ffff88000466f000 - ffff88000866f000
[ 3.115949] DMA: software IO TLB at phys 0x466f000 - 0x866f000
[ 3.115952] xen_swiotlb_fixup: buf=ffff88000466f000 size=67108864
[ 3.135221] xen_swiotlb_fixup: buf=ffff8800086cf000 size=32768
[ 3.139591] Memory: 927524k/1048576k available (3145k kernel code, 384k absent, 120668k reserved, 1902k data, 596k init)
[ 3.139632] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=2
[ 3.139666] Hierarchical RCU implementation.
[ 3.139675] NR_IRQS:4352 nr_irqs:2304
[ 3.139869] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 3.139872] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 3.139874] xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1
[ 3.139879] xen_allocate_pirq: returning irq 9 for gsi 9
[ 3.139888] xen: acpi sci 9
[ 3.145769] Console: colour VGA+ 80x25
[ 3.146041] console [hvc0] enabled
[ 3.146072] installing Xen timer for CPU 0
[ 3.146088] BUG: unable to handle kernel paging request at 0000000000005a08
[ 3.146094] IP: [<ffffffff810badce>] __alloc_pages_nodemask+0x8f/0x5f5
[ 3.146103] PGD 0
[ 3.146106] Thread overran stack, or stack corrupted
[ 3.146110] Oops: 0000 [#1] SMP
[ 3.146114] last sysfs file:
[ 3.146116] CPU 0
[ 3.146119] Modules linked in:
[ 3.146124] Pid: 0, comm: swapper Not tainted 2.6.32-5-xen-amd64 #1 PowerEdge R410
[ 3.146128] RIP: e030:[<ffffffff810badce>] [<ffffffff810badce>] __alloc_pages_nodemask+0x8f/0x5f5
[ 3.146135] RSP: e02b:ffffffff81443c88 EFLAGS: 00010046
[ 3.146138] RAX: 0000000000000000 RBX: 0000000000005220 RCX: 0000000000005a00
[ 3.146142] RDX: 0000000000000000 RSI: 0000000000000002 RDI: 0000000000005220
[ 3.146146] RBP: 0000000000004020 R08: 0000000000000002 R09: ffff88003fc1c010
[ 3.146150] R10: ffffffff813c2700 R11: 00000000000186a0 R12: 0000000000005220
[ 3.146154] R13: 0000000000000002 R14: 0000000000000000 R15: ffff88000000da28
[ 3.146162] FS: 0000000000000000(0000) GS:ffff88000349b000(0000) knlGS:0000000000000000
[ 3.146166] CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 3.146170] CR2: 0000000000005a08 CR3: 0000000001001000 CR4: 0000000000002660
[ 3.146174] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 3.146178] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 3.146183] Process swapper (pid: 0, threadinfo ffffffff81442000, task ffffffff814771f0)
[ 3.146186] Stack:
[ 3.146188] ffff88000000da00 00000010813c2765 00000000000212d0 00000000000186a0
[ 3.146195] <0> ffff88000000ac10 ffffffff8100e5b5 ffffffff8100ec72 00000000000186a0
[ 3.146202] <0> 00000000000186a0 0000000000000000 0000000000005a00 0000000000000000
[ 3.146210] Call Trace:
[ 3.146218] [<ffffffff8100e5b5>] ? xen_force_evtchn_callback+0x9/0xa
[ 3.146223] [<ffffffff8100ec72>] ? check_events+0x12/0x20
[ 3.146230] [<ffffffff810e759d>] ? new_slab+0x42/0x1ca
[ 3.146235] [<ffffffff810e7915>] ? __slab_alloc+0x1f0/0x39b
[ 3.146241] [<ffffffff812f87d8>] ? irq_to_desc_alloc_node+0x96/0x195
[ 3.146246] [<ffffffff810e85cb>] ? __kmalloc_node+0xe8/0x146
[ 3.146251] [<ffffffff812f87d8>] ? irq_to_desc_alloc_node+0x96/0x195
[ 3.146256] [<ffffffff812f87d8>] ? irq_to_desc_alloc_node+0x96/0x195
[ 3.146262] [<ffffffff811f24df>] ? find_unbound_irq+0x67/0xae
[ 3.146267] [<ffffffff811f259e>] ? bind_virq_to_irq+0x78/0x126
[ 3.146272] [<ffffffff8100e5b5>] ? xen_force_evtchn_callback+0x9/0xa
[ 3.146277] [<ffffffff8100e8f6>] ? xen_timer_interrupt+0x0/0x18d
[ 3.146282] [<ffffffff811f29f6>] ? bind_virq_to_irqhandler+0x19/0x4a
[ 3.146287] [<ffffffff8100e884>] ? xen_setup_timer+0x55/0xaa
[ 3.146293] [<ffffffff81509a5e>] ? xen_time_init+0xaf/0xb5
[ 3.146298] [<ffffffff8150a491>] ? x86_late_time_init+0xa/0x10
[ 3.146303] [<ffffffff81506c3d>] ? start_kernel+0x348/0x3e8
[ 3.146308] [<ffffffff81508c7d>] ? xen_start_kernel+0x57c/0x581
[ 3.146311] Code: d8 c1 e8 13 83 e0 01 09 44 24 64 41 89 dc 44 23 25 28 01 43 00 44 89 e2 83 e2 10 89 54 24 5c 74 05 e8 16 03 25 00 48 8b 4c 24 50 <48> 83 79 08 00 0f 84 30 05 00 00 83 e3 0f 48 8b 44 24 50 41 bf
[ 3.146366] RIP [<ffffffff810badce>] __alloc_pages_nodemask+0x8f/0x5f5
[ 3.146371] RSP <ffffffff81443c88>
[ 3.146374] CR2: 0000000000005a08
[ 3.146382] ---[ end trace a7919e7f17c0a725 ]---
[ 3.146386] Kernel panic - not syncing: Attempted to kill the idle task!
[ 3.146390] Pid: 0, comm: swapper Tainted: G D 2.6.32-5-xen-amd64 #1
[ 3.146394] Call Trace:
[ 3.146399] [<ffffffff8130a45a>] ? panic+0x86/0x141
[ 3.146403] [<ffffffff8130a563>] ? printk+0x4e/0x5b
[ 3.146410] [<ffffffff81051f7b>] ? do_exit+0x72/0x6b5
[ 3.146414] [<ffffffff8100ec72>] ? check_events+0x12/0x20
[ 3.146420] [<ffffffff8130d1bd>] ? oops_end+0xaf/0xb4
[ 3.146427] [<ffffffff8103338c>] ? no_context+0x1e9/0x1f8
[ 3.146432] [<ffffffff81033541>] ? __bad_area_nosemaphore+0x1a6/0x1ca
[ 3.146437] [<ffffffff8130e541>] ? do_page_fault+0x2b/0x2fc
[ 3.146441] [<ffffffff8130c695>] ? page_fault+0x25/0x30
[ 3.146447] [<ffffffff810badce>] ? __alloc_pages_nodemask+0x8f/0x5f5
[ 3.146452] [<ffffffff8100e5b5>] ? xen_force_evtchn_callback+0x9/0xa
[ 3.146457] [<ffffffff8100ec72>] ? check_events+0x12/0x20
[ 3.146462] [<ffffffff810e759d>] ? new_slab+0x42/0x1ca
[ 3.146466] [<ffffffff810e7915>] ? __slab_alloc+0x1f0/0x39b
[ 3.146471] [<ffffffff812f87d8>] ? irq_to_desc_alloc_node+0x96/0x195
[ 3.146476] [<ffffffff810e85cb>] ? __kmalloc_node+0xe8/0x146
[ 3.146480] [<ffffffff812f87d8>] ? irq_to_desc_alloc_node+0x96/0x195
[ 3.146485] [<ffffffff812f87d8>] ? irq_to_desc_alloc_node+0x96/0x195
[ 3.146490] [<ffffffff811f24df>] ? find_unbound_irq+0x67/0xae
[ 3.146495] [<ffffffff811f259e>] ? bind_virq_to_irq+0x78/0x126
[ 3.146500] [<ffffffff8100e5b5>] ? xen_force_evtchn_callback+0x9/0xa
[ 3.146505] [<ffffffff8100e8f6>] ? xen_timer_interrupt+0x0/0x18d
[ 3.146509] [<ffffffff811f29f6>] ? bind_virq_to_irqhandler+0x19/0x4a
[ 3.146515] [<ffffffff8100e884>] ? xen_setup_timer+0x55/0xaa
[ 3.146519] [<ffffffff81509a5e>] ? xen_time_init+0xaf/0xb5
[ 3.146524] [<ffffffff8150a491>] ? x86_late_time_init+0xa/0x10
[ 3.146529] [<ffffffff81506c3d>] ? start_kernel+0x348/0x3e8
[ 3.146533] [<ffffffff81508c7d>] ? xen_start_kernel+0x57c/0x581
(XEN) Domain 0 crashed: rebooting machine in 5 seconds.
Reply to: