[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#604824: linux-2.6: problems with ata disk interface: temporary freezes



Yes, I know, perhaps I should file a bug against reportbug,
because it does not work properly:
reportbug
> linux-image
A package named "linux-2.6" does not appear to be installed;
Boh!
Anyway, here it comes the information you need:
package is linux-image-686 aka linux-image-2.6.32-5-686 version
2.6.32-27.
0% cat /proc/version
Linux version 2.6.32-5-686 (Debian 2.6.32-27) (maks@debian.org) (gcc
version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Sat Oct 30 22:47:19 UTC 2010
Please find attached $(dmesg) and $(lspci)
Fulvio
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-27) (maks@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Sat Oct 30 22:47:19 UTC 2010
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[    0.000000]  BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007ffd8000 (usable)
[    0.000000]  BIOS-e820: 000000007ffd8000 - 0000000080000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0007000 (reserved)
[    0.000000]  BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed20000 - 00000000fee10000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[    0.000000] DMI 2.3 present.
[    0.000000] last_pfn = 0x7ffd8 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 0FEDA0000 mask FFFFE0000 write-through
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] PAT not supported by CPU.
[    0.000000] initial memory mapped : 0 - 01800000
[    0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037000000 page 2M
[    0.000000]  0037000000 - 00373fe000 page 4k
[    0.000000] kernel direct mapping tables up to 373fe000 @ 7000-d000
[    0.000000] RAMDISK: 377df000 - 37fef0c3
[    0.000000] Allocated new RAMDISK: 00100000 - 009100c3
[    0.000000] Move RAMDISK from 00000000377df000 - 0000000037fef0c2 to 00100000 - 009100c2
[    0.000000] ACPI: RSDP 000fc9b0 00014 (v00 DELL  )
[    0.000000] ACPI: RSDT 7ffd8790 00040 (v01 DELL    CPi R   27D5091E ASL  00000061)
[    0.000000] ACPI: FACP 7ffd9400 00074 (v01 DELL    CPi R   27D5091E ASL  00000061)
[    0.000000] ACPI: DSDT 7ffda000 0355D (v01 INT430 SYSFexxx 00001001 MSFT 0100000E)
[    0.000000] ACPI: FACS 7ffe8800 00040
[    0.000000] ACPI: APIC 7ffd9c00 00068 (v01 DELL    CPi R   27D5091E ASL  00000047)
[    0.000000] ACPI: ASF! 7ffd9800 0005B (v16 DELL    CPi R   27D5091E ASL  00000061)
[    0.000000] ACPI: MCFG 7ffd9bc0 0003E (v16 DELL    CPi R   27D5091E ASL  00000061)
[    0.000000] ACPI: SSDT 7ffd8be6 00280 (v01  PmRef  Cpu0Ist 00003000 INTL 20030522)
[    0.000000] ACPI: SSDT 7ffd8a0e 001D8 (v01  PmRef  Cpu0Cst 00003001 INTL 20030522)
[    0.000000] ACPI: SSDT 7ffd8813 001FB (v01  PmRef    CpuPm 00003000 INTL 20030522)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1163MB HIGHMEM available.
[    0.000000] 883MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 373fe000
[    0.000000]   low ram: 0 - 373fe000
[    0.000000]   node 0 low ram: 00000000 - 373fe000
[    0.000000]   node 0 bootmap 00009000 - 0000fe80
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0001000000 - 00014c7bb4]    TEXT DATA BSS ==> [0001000000 - 00014c7bb4]
[    0.000000]   #4 [000009f000 - 0000100000]    BIOS reserved ==> [000009f000 - 0000100000]
[    0.000000]   #5 [00014c8000 - 00014ce188]              BRK ==> [00014c8000 - 00014ce188]
[    0.000000]   #6 [0000007000 - 0000009000]          PGTABLE ==> [0000007000 - 0000009000]
[    0.000000]   #7 [0000100000 - 00009100c3]      NEW RAMDISK ==> [0000100000 - 00009100c3]
[    0.000000]   #8 [0000009000 - 0000010000]          BOOTMAP ==> [0000009000 - 0000010000]
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000373fe
[    0.000000]   HighMem  0x000373fe -> 0x0007ffd8
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0007ffd8
[    0.000000] On node 0 totalpages: 524151
[    0.000000] free_area_init_node: node 0, pgdat c13b2720, node_mem_map c14d0000
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3967 pages, LIFO batch:0
[    0.000000]   Normal zone: 1736 pages used for memmap
[    0.000000]   Normal zone: 220470 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2328 pages used for memmap
[    0.000000]   HighMem zone: 295618 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] Using ACPI for processor (LAPIC) configuration information
[    0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[    0.000000] nr_irqs_gsi: 16
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @c2800000 s34296 r0 d23048 u2097152
[    0.000000] pcpu-alloc: s34296 r0 d23048 u2097152 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 520055
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=51df229f-16d0-40c7-9deb-1758755ba56e ro quiet pci=noacpi
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000373fe:0007ffd8)
[    0.000000] Memory: 2065148k/2096992k available (2499k kernel code, 30552k reserved, 1324k data, 372k init, 1191784k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xffd56000 - 0xfffff000   (2724 kB)
[    0.000000]     pkmap   : 0xff400000 - 0xff800000   (4096 kB)
[    0.000000]     vmalloc : 0xf7bfe000 - 0xff3fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf73fe000   ( 883 MB)
[    0.000000]       .init : 0xc13bd000 - 0xc141a000   ( 372 kB)
[    0.000000]       .data : 0xc1270fd9 - 0xc13bc320   (1324 kB)
[    0.000000]       .text : 0xc1000000 - 0xc1270fd9   (2499 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:1280
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1862.060 MHz processor.
[    0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3724.12 BogoMIPS (lpj=7448240)
[    0.004029] Security Framework initialized
[    0.004038] SELinux:  Disabled at boot.
[    0.004047] Mount-cache hash table entries: 512
[    0.004216] Initializing cgroup subsys ns
[    0.004221] Initializing cgroup subsys cpuacct
[    0.004225] Initializing cgroup subsys devices
[    0.004228] Initializing cgroup subsys freezer
[    0.004231] Initializing cgroup subsys net_cls
[    0.004260] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.004263] CPU: L2 cache: 2048K
[    0.004268] mce: CPU supports 5 MCE banks
[    0.004279] CPU0: Thermal monitoring enabled (TM1)
[    0.004290] Performance Events: p6 PMU driver.
[    0.004297] ... version:                0
[    0.004299] ... bit width:              32
[    0.004300] ... generic registers:      2
[    0.004302] ... value mask:             00000000ffffffff
[    0.004305] ... max period:             000000007fffffff
[    0.004307] ... fixed-purpose events:   0
[    0.004309] ... event mask:             0000000000000003
[    0.004314] Checking 'hlt' instruction... OK.
[    0.020385] SMP alternatives: switching to UP code
[    0.023943] ACPI: Core revision 20090903
[    0.031566] Enabling APIC mode:  Flat.  Using 0 I/O APICs
[    0.031575] CPU0: Intel(R) Pentium(R) M processor 1.86GHz stepping 08
[    0.032001] Brought up 1 CPUs
[    0.032001] Total of 1 processors activated (3724.12 BogoMIPS).
[    0.032001] CPU0 attaching NULL sched-domain.
[    0.032001] devtmpfs: initialized
[    0.032001] regulator: core version 0.5
[    0.032001] NET: Registered protocol family 16
[    0.032001] ACPI: bus type pci registered
[    0.032001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.032001] PCI: MCFG area at e0000000 reserved in E820
[    0.032001] PCI: Using MMCONFIG for extended config space
[    0.032001] PCI: Using configuration type 1 for base access
[    0.032001] bio: create slab <bio-0> at 0
[    0.032001] ACPI: EC: Look up EC in DSDT
[    0.050618] ACPI: SSDT 7ffd87d0 00043 (v01  LMPWR  DELLLOM 00001001 INTL 20030522)
[    0.051852] ACPI: Interpreter enabled
[    0.051856] ACPI: (supports S0 S3 S4 S5)
[    0.051876] ACPI: Using PIC for interrupt routing
[    0.082685] ACPI: ACPI Dock Station Driver: 2 docks/bays found
[    0.082739] vgaarb: loaded
[    0.082797] PCI: Probing PCI hardware
[    0.082800] PCI: Probing PCI hardware (bus 00)
[    0.082897] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.082900] pci 0000:00:01.0: PME# disabled
[    0.083022] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.083027] pci 0000:00:1c.0: PME# disabled
[    0.083093] pci 0000:00:1d.0: reg 20 io port: [0xbf80-0xbf9f]
[    0.083153] pci 0000:00:1d.1: reg 20 io port: [0xbf60-0xbf7f]
[    0.083214] pci 0000:00:1d.2: reg 20 io port: [0xbf40-0xbf5f]
[    0.083274] pci 0000:00:1d.3: reg 20 io port: [0xbf20-0xbf3f]
[    0.083337] pci 0000:00:1d.7: reg 10 32bit mmio: [0xffa80800-0xffa80bff]
[    0.083395] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.083401] pci 0000:00:1d.7: PME# disabled
[    0.083507] pci 0000:00:1e.2: reg 10 io port: [0xed00-0xedff]
[    0.083515] pci 0000:00:1e.2: reg 14 io port: [0xec40-0xec7f]
[    0.083523] pci 0000:00:1e.2: reg 18 32bit mmio: [0xdffffe00-0xdfffffff]
[    0.083532] pci 0000:00:1e.2: reg 1c 32bit mmio: [0xdffffd00-0xdffffdff]
[    0.083569] pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
[    0.083573] pci 0000:00:1e.2: PME# disabled
[    0.083610] pci 0000:00:1e.3: reg 10 io port: [0xee00-0xeeff]
[    0.083619] pci 0000:00:1e.3: reg 14 io port: [0xec80-0xecff]
[    0.083666] pci 0000:00:1e.3: PME# supported from D0 D3hot D3cold
[    0.083670] pci 0000:00:1e.3: PME# disabled
[    0.083757] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[    0.083764] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[    0.083769] pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO
[    0.083774] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0900-097f
[    0.083816] pci 0000:00:1f.2: reg 10 io port: [0x1f0-0x1f7]
[    0.083824] pci 0000:00:1f.2: reg 14 io port: [0x3f4-0x3f7]
[    0.083832] pci 0000:00:1f.2: reg 18 io port: [0x170-0x177]
[    0.083840] pci 0000:00:1f.2: reg 1c io port: [0x374-0x377]
[    0.083848] pci 0000:00:1f.2: reg 20 io port: [0xbfa0-0xbfaf]
[    0.083881] pci 0000:00:1f.2: PME# supported from D3hot
[    0.083886] pci 0000:00:1f.2: PME# disabled
[    0.083922] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xd0000000-0xd7ffffff]
[    0.083928] pci 0000:01:00.0: reg 14 io port: [0xde00-0xdeff]
[    0.083934] pci 0000:01:00.0: reg 18 32bit mmio: [0xdfdf0000-0xdfdfffff]
[    0.083950] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xdfe00000-0xdfe1ffff]
[    0.083967] pci 0000:01:00.0: supports D1 D2
[    0.083980] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.084050] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff]
[    0.084054] pci 0000:00:01.0: bridge 32bit mmio: [0xdfd00000-0xdfefffff]
[    0.084058] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd0000000-0xd7ffffff]
[    0.084137] pci 0000:02:00.0: reg 10 64bit mmio: [0xdfcf0000-0xdfcfffff]
[    0.084228] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.084234] pci 0000:02:00.0: PME# disabled
[    0.084272] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.084367] pci 0000:00:1c.0: bridge 32bit mmio: [0xdfc00000-0xdfcfffff]
[    0.084422] pci 0000:03:01.0: reg 10 32bit mmio: [0x000000-0x000fff]
[    0.084448] pci 0000:03:01.0: supports D1 D2
[    0.084451] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.084456] pci 0000:03:01.0: PME# disabled
[    0.084509] pci 0000:03:01.5: reg 10 32bit mmio: [0xdfbfd000-0xdfbfdfff]
[    0.084518] pci 0000:03:01.5: reg 14 32bit mmio: [0xdfbfe000-0xdfbfefff]
[    0.084576] pci 0000:03:01.5: supports D1 D2
[    0.084578] pci 0000:03:01.5: PME# supported from D0 D1 D2 D3hot
[    0.084584] pci 0000:03:01.5: PME# disabled
[    0.084642] pci 0000:03:03.0: reg 10 32bit mmio: [0xdfbff000-0xdfbfffff]
[    0.084709] pci 0000:03:03.0: PME# supported from D0 D3hot D3cold
[    0.084714] pci 0000:03:03.0: PME# disabled
[    0.084776] pci 0000:00:1e.0: transparent bridge
[    0.084784] pci 0000:00:1e.0: bridge 32bit mmio: [0xdfb00000-0xdfbfffff]
[    0.085125] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.085334] pci 0000:00:1f.0: PIIX/ICH IRQ router [8086:2641]
[    0.085375] PCI: setting IRQ 5 as level-triggered
[    0.085379] pci 0000:03:01.0: found PCI INT A -> IRQ 5
[    0.085392] pci 0000:03:01.0: sharing IRQ 5 with 0000:00:1d.3
[    0.085412] pci 0000:03:01.0: sharing IRQ 5 with 0000:03:01.5
[    0.085692] hpet clockevent registered
[    0.085696] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.085703] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.085708] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.088017] Switching to clocksource tsc
[    0.089404] pnp: PnP ACPI init
[    0.089414] ACPI: bus type pnp registered
[    0.116496] pnp 00:02: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
[    0.116501] pnp 00:02: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
[    0.116568] pnp 00:03: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
[    0.116572] pnp 00:03: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
[    0.116576] pnp 00:03: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
[    0.133805] pnp: PnP ACPI: found 13 devices
[    0.133808] ACPI: ACPI bus type pnp unregistered
[    0.133811] PnPBIOS: Disabled by ACPI PNP
[    0.133823] system 00:00: iomem range 0x0-0x9fbff could not be reserved
[    0.133826] system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
[    0.133830] system 00:00: iomem range 0xc0000-0xcffff could not be reserved
[    0.133833] system 00:00: iomem range 0xe0000-0xfffff could not be reserved
[    0.133837] system 00:00: iomem range 0x100000-0x7ffd7fff could not be reserved
[    0.133840] system 00:00: iomem range 0x7ffd8000-0x7fffffff has been reserved
[    0.133844] system 00:00: iomem range 0xfeda0000-0xfedfffff has been reserved
[    0.133847] system 00:00: iomem range 0xffb00000-0xffffffff has been reserved
[    0.133851] system 00:00: iomem range 0xfec00000-0xfec0ffff has been reserved
[    0.133854] system 00:00: iomem range 0xfee00000-0xfee0ffff has been reserved
[    0.133857] system 00:00: iomem range 0xfed20000-0xfed9ffff has been reserved
[    0.133861] system 00:00: iomem range 0xf0000000-0xf0003fff has been reserved
[    0.133864] system 00:00: iomem range 0xf0004000-0xf0004fff has been reserved
[    0.133868] system 00:00: iomem range 0xf0005000-0xf0005fff has been reserved
[    0.133871] system 00:00: iomem range 0xf0006000-0xf0006fff has been reserved
[    0.133875] system 00:00: iomem range 0xf0008000-0xf000bfff has been reserved
[    0.133878] system 00:00: iomem range 0xe0000000-0xefffffff has been reserved
[    0.133885] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[    0.133891] system 00:03: ioport range 0xf400-0xf4fe has been reserved
[    0.133895] system 00:03: ioport range 0x1080-0x10bf has been reserved
[    0.133898] system 00:03: ioport range 0x10c0-0x10df has been reserved
[    0.133902] system 00:03: ioport range 0x10e0-0x10ff has been reserved
[    0.133908] system 00:08: ioport range 0x900-0x90f has been reserved
[    0.133912] system 00:08: ioport range 0x910-0x91f has been reserved
[    0.133915] system 00:08: ioport range 0x920-0x92f has been reserved
[    0.133918] system 00:08: ioport range 0x93c-0x93f has been reserved
[    0.133922] system 00:08: ioport range 0x940-0x97f has been reserved
[    0.133928] system 00:0c: ioport range 0x930-0x93b has been reserved
[    0.168655] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.168658] pci 0000:00:01.0:   IO window: 0xd000-0xdfff
[    0.168663] pci 0000:00:01.0:   MEM window: 0xdfd00000-0xdfefffff
[    0.168667] pci 0000:00:01.0:   PREFETCH window: 0xd0000000-0xd7ffffff
[    0.168671] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[    0.168675] pci 0000:00:1c.0:   IO window: 0x2000-0x2fff
[    0.168682] pci 0000:00:1c.0:   MEM window: 0xdfc00000-0xdfcfffff
[    0.168687] pci 0000:00:1c.0:   PREFETCH window: 0x00000084000000-0x000000841fffff
[    0.168701] pci 0000:03:01.0: CardBus bridge, secondary bus 0000:04
[    0.168704] pci 0000:03:01.0:   IO window: 0x003000-0x0030ff
[    0.168710] pci 0000:03:01.0:   IO window: 0x003400-0x0034ff
[    0.168716] pci 0000:03:01.0:   PREFETCH window: 0x80000000-0x83ffffff
[    0.168722] pci 0000:03:01.0:   MEM window: 0x88000000-0x8bffffff
[    0.168728] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[    0.168731] pci 0000:00:1e.0:   IO window: 0x3000-0x3fff
[    0.168738] pci 0000:00:1e.0:   MEM window: 0xdfb00000-0xdfbfffff
[    0.168743] pci 0000:00:1e.0:   PREFETCH window: 0x80000000-0x83ffffff
[    0.168756] pci 0000:00:01.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[    0.168761] pci 0000:00:01.0: setting latency timer to 64
[    0.168772] pci 0000:00:1c.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[    0.168777] pci 0000:00:1c.0: setting latency timer to 64
[    0.168786] pci 0000:00:1e.0: setting latency timer to 64
[    0.168797] pci 0000:03:01.0: enabling device (0000 -> 0003)
[    0.168808] pci 0000:03:01.0: found PCI INT A -> IRQ 5
[    0.168820] pci 0000:03:01.0: sharing IRQ 5 with 0000:00:1d.3
[    0.168841] pci 0000:03:01.0: sharing IRQ 5 with 0000:03:01.5
[    0.168852] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.168855] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.168858] pci_bus 0000:01: resource 0 io:  [0xd000-0xdfff]
[    0.168861] pci_bus 0000:01: resource 1 mem: [0xdfd00000-0xdfefffff]
[    0.168864] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xd7ffffff]
[    0.168867] pci_bus 0000:02: resource 0 io:  [0x2000-0x2fff]
[    0.168870] pci_bus 0000:02: resource 1 mem: [0xdfc00000-0xdfcfffff]
[    0.168873] pci_bus 0000:02: resource 2 pref mem [0x84000000-0x841fffff]
[    0.168876] pci_bus 0000:03: resource 0 io:  [0x3000-0x3fff]
[    0.168879] pci_bus 0000:03: resource 1 mem: [0xdfb00000-0xdfbfffff]
[    0.168882] pci_bus 0000:03: resource 2 pref mem [0x80000000-0x83ffffff]
[    0.168885] pci_bus 0000:03: resource 3 io:  [0x00-0xffff]
[    0.168888] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
[    0.168891] pci_bus 0000:04: resource 0 io:  [0x3000-0x30ff]
[    0.168894] pci_bus 0000:04: resource 1 io:  [0x3400-0x34ff]
[    0.168897] pci_bus 0000:04: resource 2 pref mem [0x80000000-0x83ffffff]
[    0.168900] pci_bus 0000:04: resource 3 mem: [0x88000000-0x8bffffff]
[    0.168931] NET: Registered protocol family 2
[    0.169017] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.169321] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.170264] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.170849] TCP: Hash tables configured (established 131072 bind 65536)
[    0.170852] TCP reno registered
[    0.170980] NET: Registered protocol family 1
[    0.171106] pci 0000:01:00.0: Boot video device
[    0.171174] Unpacking initramfs...
[    0.440036] Freeing initrd memory: 8256k freed
[    0.446865] audit: initializing netlink socket (disabled)
[    0.446885] type=2000 audit(1290580151.443:1): initialized
[    0.451964] highmem bounce pool size: 64 pages
[    0.451970] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.453503] VFS: Disk quotas dquot_6.5.2
[    0.453563] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.453644] msgmni has been set to 1723
[    0.453844] alg: No test for stdrng (krng)
[    0.453897] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.453900] io scheduler noop registered
[    0.453903] io scheduler anticipatory registered
[    0.453905] io scheduler deadline registered
[    0.453941] io scheduler cfq registered (default)
[    0.454020] pcieport 0000:00:01.0: device [8086:2591] has invalid IRQ; check vendor BIOS
[    0.454061] pcieport 0000:00:01.0: irq 16 for MSI/MSI-X
[    0.454068] pcieport 0000:00:01.0: setting latency timer to 64
[    0.454128] pcieport 0000:00:1c.0: device [8086:2660] has invalid IRQ; check vendor BIOS
[    0.454189] pcieport 0000:00:1c.0: irq 17 for MSI/MSI-X
[    0.454199] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.454359] isapnp: Scanning for PnP cards...
[    0.808094] isapnp: No Plug & Play device found
[    0.809424] Linux agpgart interface v0.103
[    0.809553] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.809667] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.810058] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.810131] PCI: setting IRQ 10 as level-triggered
[    0.810135] serial 0000:00:1e.3: found PCI INT B -> IRQ 10
[    0.810145] serial 0000:00:1e.3: sharing IRQ 10 with 0000:00:1d.1
[    0.810161] serial 0000:00:1e.3: sharing IRQ 10 with 0000:00:1f.2
[    0.810174] serial 0000:00:1e.3: sharing IRQ 10 with 0000:03:03.0
[    0.810270] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.814692] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.814700] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.814792] mice: PS/2 mouse device common for all mice
[    0.814879] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    0.814905] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.814917] cpuidle: using governor ladder
[    0.814919] cpuidle: using governor menu
[    0.814923] No iBFT detected.
[    0.815279] TCP cubic registered
[    0.815426] NET: Registered protocol family 10
[    0.815873] lo: Disabled Privacy Extensions
[    0.816176] Mobile IPv6
[    0.816179] NET: Registered protocol family 17
[    0.816195] Using IPI No-Shortcut mode
[    0.816259] PM: Resume from disk failed.
[    0.816272] registered taskstats version 1
[    0.816631] rtc_cmos 00:06: setting system clock to 2010-11-24 06:29:12 UTC (1290580152)
[    0.816669] Initalizing network drop monitor service
[    0.816696] Freeing unused kernel memory: 372k freed
[    0.816935] Write protecting the kernel text: 2500k
[    0.816957] Write protecting the kernel read-only data: 924k
[    0.818370] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.836116] udev[46]: starting version 164
[    1.059054] usbcore: registered new interface driver usbfs
[    1.059194] usbcore: registered new interface driver hub
[    1.059331] usbcore: registered new device driver usb
[    1.066297] SCSI subsystem initialized
[    1.095977] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.096026] PCI: setting IRQ 11 as level-triggered
[    1.096031] ehci_hcd 0000:00:1d.7: found PCI INT A -> IRQ 11
[    1.096041] ehci_hcd 0000:00:1d.7: sharing IRQ 11 with 0000:00:1d.0
[    1.096054] ehci_hcd 0000:00:1d.7: sharing IRQ 11 with 0000:00:1e.2
[    1.096064] ehci_hcd 0000:00:1d.7: sharing IRQ 11 with 0000:01:00.0
[    1.096069] ehci_hcd 0000:00:1d.7: sharing IRQ 11 with 0000:02:00.0
[    1.096091] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.096095] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.096126] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.096157] ehci_hcd 0000:00:1d.7: debug port 1
[    1.100046] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    1.100057] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xffa80800
[    1.112101] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.112149] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.112152] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.112155] usb usb1: Product: EHCI Host Controller
[    1.112158] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[    1.112160] usb usb1: SerialNumber: 0000:00:1d.7
[    1.112246] usb usb1: configuration #1 chosen from 1 choice
[    1.112278] hub 1-0:1.0: USB hub found
[    1.112285] hub 1-0:1.0: 8 ports detected
[    1.114935] thermal LNXTHERM:01: registered as thermal_zone0
[    1.114943] ACPI: Thermal Zone [THM] (70 C)
[    1.115093] libata version 3.00 loaded.
[    1.122669] uhci_hcd: USB Universal Host Controller Interface driver
[    1.122716] uhci_hcd 0000:00:1d.0: found PCI INT A -> IRQ 11
[    1.122733] uhci_hcd 0000:00:1d.0: sharing IRQ 11 with 0000:00:1d.7
[    1.122739] uhci_hcd 0000:00:1d.0: sharing IRQ 11 with 0000:00:1e.2
[    1.122749] uhci_hcd 0000:00:1d.0: sharing IRQ 11 with 0000:01:00.0
[    1.122754] uhci_hcd 0000:00:1d.0: sharing IRQ 11 with 0000:02:00.0
[    1.122770] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.122773] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.122782] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.122811] uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80
[    1.122850] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.122853] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.122856] usb usb2: Product: UHCI Host Controller
[    1.122858] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[    1.122860] usb usb2: SerialNumber: 0000:00:1d.0
[    1.122976] tg3.c:v3.102 (September 1, 2009)
[    1.122996] tg3 0000:02:00.0: found PCI INT A -> IRQ 11
[    1.123003] tg3 0000:02:00.0: sharing IRQ 11 with 0000:00:1d.0
[    1.123013] tg3 0000:02:00.0: sharing IRQ 11 with 0000:00:1d.7
[    1.123018] tg3 0000:02:00.0: sharing IRQ 11 with 0000:00:1e.2
[    1.123027] tg3 0000:02:00.0: sharing IRQ 11 with 0000:01:00.0
[    1.123044] tg3 0000:02:00.0: setting latency timer to 64
[    1.123132] usb usb2: configuration #1 chosen from 1 choice
[    1.123198] hub 2-0:1.0: USB hub found
[    1.123205] hub 2-0:1.0: 2 ports detected
[    1.123263] uhci_hcd 0000:00:1d.1: found PCI INT B -> IRQ 10
[    1.123282] uhci_hcd 0000:00:1d.1: sharing IRQ 10 with 0000:00:1e.3
[    1.123289] uhci_hcd 0000:00:1d.1: sharing IRQ 10 with 0000:00:1f.2
[    1.123301] uhci_hcd 0000:00:1d.1: sharing IRQ 10 with 0000:03:03.0
[    1.123307] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.123311] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.123318] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.123347] uhci_hcd 0000:00:1d.1: irq 10, io base 0x0000bf60
[    1.123380] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.123383] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.123386] usb usb3: Product: UHCI Host Controller
[    1.123388] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[    1.123390] usb usb3: SerialNumber: 0000:00:1d.1
[    1.123495] usb usb3: configuration #1 chosen from 1 choice
[    1.123558] hub 3-0:1.0: USB hub found
[    1.123570] hub 3-0:1.0: 2 ports detected
[    1.123616] PCI: setting IRQ 9 as level-triggered
[    1.123621] uhci_hcd 0000:00:1d.2: found PCI INT C -> IRQ 9
[    1.123657] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.123661] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.123668] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.123694] uhci_hcd 0000:00:1d.2: irq 9, io base 0x0000bf40
[    1.123730] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.123733] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.123736] usb usb4: Product: UHCI Host Controller
[    1.123738] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[    1.123741] usb usb4: SerialNumber: 0000:00:1d.2
[    1.123838] usb usb4: configuration #1 chosen from 1 choice
[    1.123900] hub 4-0:1.0: USB hub found
[    1.123907] hub 4-0:1.0: 2 ports detected
[    1.123957] uhci_hcd 0000:00:1d.3: found PCI INT D -> IRQ 5
[    1.123986] uhci_hcd 0000:00:1d.3: sharing IRQ 5 with 0000:03:01.0
[    1.123990] uhci_hcd 0000:00:1d.3: sharing IRQ 5 with 0000:03:01.5
[    1.124012] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    1.124016] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.124023] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.124052] uhci_hcd 0000:00:1d.3: irq 5, io base 0x0000bf20
[    1.124085] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.124088] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.124090] usb usb5: Product: UHCI Host Controller
[    1.124093] usb usb5: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[    1.124095] usb usb5: SerialNumber: 0000:00:1d.3
[    1.124195] usb usb5: configuration #1 chosen from 1 choice
[    1.124258] hub 5-0:1.0: USB hub found
[    1.124265] hub 5-0:1.0: 2 ports detected
[    1.125239] ahci 0000:00:1f.2: version 3.0
[    1.125255] ahci 0000:00:1f.2: found PCI INT B -> IRQ 10
[    1.125265] ahci 0000:00:1f.2: sharing IRQ 10 with 0000:00:1d.1
[    1.125277] ahci 0000:00:1f.2: sharing IRQ 10 with 0000:00:1e.3
[    1.125294] ahci 0000:00:1f.2: sharing IRQ 10 with 0000:03:03.0
[    1.125307] ahci: probe of 0000:00:1f.2 failed with error -22
[    1.133143] ata_piix 0000:00:1f.2: version 2.13
[    1.133158] ata_piix 0000:00:1f.2: found PCI INT B -> IRQ 10
[    1.133168] ata_piix 0000:00:1f.2: sharing IRQ 10 with 0000:00:1d.1
[    1.133181] ata_piix 0000:00:1f.2: sharing IRQ 10 with 0000:00:1e.3
[    1.133198] ata_piix 0000:00:1f.2: sharing IRQ 10 with 0000:03:03.0
[    1.133204] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[    1.142552] eth0: Tigon3 [partno(BCM95751) rev 4001] (PCI Express) MAC address 00:14:22:e0:cc:40
[    1.142556] eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[    1.142559] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    1.142562] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    1.288023] ata_piix 0000:00:1f.2: setting latency timer to 64
[    1.288166] scsi0 : ata_piix
[    1.288320] scsi1 : ata_piix
[    1.288358] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
[    1.288361] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
[    1.454332] ata1.00: ATA-8: SAMSUNG HM160HC, LQ100-10, max UDMA/100
[    1.454336] ata1.00: 312581808 sectors, multi 8: LBA48 
[    1.454350] ata1.00: applying bridge limits
[    1.470285] ata1.00: configured for UDMA/100
[    1.470399] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HM160HC  LQ10 PQ: 0 ANSI: 5
[    1.476356] ata2.00: ATAPI: TSSTcorpCD-RW/DVD-ROM TSL462C, DE01, max UDMA/33
[    1.508267] ata2.00: configured for UDMA/33
[    1.509110] scsi 1:0:0:0: CD-ROM            TSSTcorp CDRW/DVD TSL462C DE01 PQ: 0 ANSI: 5
[    1.526088] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    1.526147] sd 0:0:0:0: [sda] Write Protect is off
[    1.526151] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.526175] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.526313]  sda:sr0: scsi3-mmc drive: 10x/24x writer cd/rw xa/form2 cdda tray
[    1.529267] Uniform CD-ROM driver Revision: 3.20
[    1.529521] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.576652]  sda1 sda2
[    1.577074] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.588059] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.588536] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.664011] usb 3-1: new full speed USB device using uhci_hcd and address 2
[    1.841003] usb 3-1: New USB device found, idVendor=413c, idProduct=8103
[    1.841007] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.841095] usb 3-1: configuration #1 chosen from 1 choice
[    1.871168] kjournald starting.  Commit interval 5 seconds
[    1.871176] EXT3-fs: mounted filesystem with ordered data mode.
[    3.204158] udev[344]: starting version 164
[    3.994143] ACPI: AC Adapter [AC] (on-line)
[    4.000239] input: PC Speaker as /devices/platform/pcspkr/input/input1
[    4.000842] Marking TSC unstable due to TSC halts in idle
[    4.001773] processor LNXCPU:00: registered as cooling_device0
[    4.004022] Switching to clocksource hpet
[    4.011396] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    4.082127] lib80211: common routines for IEEE802.11 drivers
[    4.082131] lib80211_crypt: registered algorithm 'NULL'
[    4.181410] Bluetooth: Core ver 2.15
[    4.181571] NET: Registered protocol family 31
[    4.181573] Bluetooth: HCI device and connection manager initialized
[    4.181576] Bluetooth: HCI socket layer initialized
[    4.270759] Bluetooth: Generic Bluetooth USB driver ver 0.6
[    4.271295] usbcore: registered new interface driver btusb
[    4.296327] ACPI: Battery Slot [BAT0] (battery present)
[    4.300070] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    4.310737] ACPI: Lid Switch [LID]
[    4.310786] ACPI: Battery Slot [BAT1] (battery absent)
[    4.314302] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[    4.314389] ACPI: Power Button [PBTN]
[    4.314682] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
[    4.314746] ACPI: Sleep Button [SBTN]
[    4.660729] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input5
[    4.682507] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input6
[    5.013656] ieee80211: 802.11 data/management/control stack, git-1.1.13
[    5.013660] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[    5.014266] intel_rng: FWH not detected
[    5.160506] [drm] Initialized drm 1.1.0 20060810
[    5.232677] yenta_cardbus 0000:03:01.0: CardBus bridge found [1028:0186]
[    5.232701] yenta_cardbus 0000:03:01.0: Using CSCINT to route CSC interrupts to PCI
[    5.232703] yenta_cardbus 0000:03:01.0: Routing CardBus interrupts to PCI
[    5.232710] yenta_cardbus 0000:03:01.0: TI: mfunc 0x01111122, devctl 0x64
[    5.245525] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[    5.245528] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[    5.468801] yenta_cardbus 0000:03:01.0: ISA IRQ mask 0x00d8, PCI irq 5
[    5.468807] yenta_cardbus 0000:03:01.0: Socket status: 30000006
[    5.468812] pci_bus 0000:03: Raising subordinate bus# of parent bus (#03) from #04 to #07
[    5.468822] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
[    5.468827] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x3fff: clean.
[    5.469064] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge Memory window: 0xdfb00000 - 0xdfbfffff
[    5.469067] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x83ffffff
[    5.470367] ipw2200 0000:03:03.0: found PCI INT A -> IRQ 10
[    5.470381] ipw2200 0000:03:03.0: sharing IRQ 10 with 0000:00:1d.1
[    5.470395] ipw2200 0000:03:03.0: sharing IRQ 10 with 0000:00:1e.3
[    5.470401] ipw2200 0000:03:03.0: sharing IRQ 10 with 0000:00:1f.2
[    5.472905] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[    5.472948] ipw2200 0000:03:03.0: firmware: requesting ipw2200-bss.fw
[    5.479128] [drm] radeon kernel modesetting enabled.
[    5.479190] radeon 0000:01:00.0: found PCI INT A -> IRQ 11
[    5.479200] radeon 0000:01:00.0: sharing IRQ 11 with 0000:00:1d.0
[    5.479210] radeon 0000:01:00.0: sharing IRQ 11 with 0000:00:1d.7
[    5.479216] radeon 0000:01:00.0: sharing IRQ 11 with 0000:00:1e.2
[    5.479228] radeon 0000:01:00.0: sharing IRQ 11 with 0000:02:00.0
[    5.479240] radeon 0000:01:00.0: setting latency timer to 64
[    5.481775] [drm] radeon: Initializing kernel modesetting.
[    5.484581] [drm] register mmio base: 0xDFDF0000
[    5.484585] [drm] register mmio size: 65536
[    5.484925] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
[    5.484943] [drm] Generation 2 PCI interface, using max accessible memory
[    5.484947] [drm] radeon: VRAM 128M
[    5.484949] [drm] radeon: VRAM from 0x00000000 to 0x07FFFFFF
[    5.484951] [drm] radeon: GTT 512M
[    5.484953] [drm] radeon: GTT from 0x20000000 to 0x3FFFFFFF
[    5.484992] radeon 0000:01:00.0: irq 18 for MSI/MSI-X
[    5.484998] radeon 0000:01:00.0: radeon: using MSI.
[    5.485022] [drm] radeon: irq initialized.
[    5.485738] [drm] Detected VRAM RAM=128M, BAR=128M
[    5.485742] [drm] RAM width 128bits DDR
[    5.485824] [TTM] Zone  kernel: Available graphics memory: 441448 kiB.
[    5.485826] [TTM] Zone highmem: Available graphics memory: 1037340 kiB.
[    5.485845] [drm] radeon: 128M of VRAM memory ready
[    5.485847] [drm] radeon: 512M of GTT memory ready.
[    5.485864] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    5.486376] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[    5.486427] [drm] PCIE GART of 512M enabled (table at 0x00040000).
[    5.486436] [drm] radeon: cp idle (0x10000C03)
[    5.486475] [drm] Loading R300 Microcode
[    5.486827] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[    5.545224] radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
[    5.545270] [drm:r100_cp_init] *ERROR* Failed to load firmware!
[    5.545314] radeon 0000:01:00.0: failled initializing CP (-2).
[    5.545356] radeon 0000:01:00.0: Disabling GPU acceleration
[    5.545400] [drm] radeon: cp finalized
[    5.545426] radeon 0000:01:00.0: f65c7500 unpin not necessary
[    5.546038] [drm] DFP table revision: 4
[    5.546079] [drm] Panel ID String: JF377
[    5.546082] [drm] Panel Size 1680x1050
[    5.546113] [drm] Default TV standard: NTSC
[    5.546115] [drm] 27.000000000 MHz TV ref clk
[    5.546117] [drm] Default TV standard: NTSC
[    5.546119] [drm] 27.000000000 MHz TV ref clk
[    5.546148] [drm] Radeon Display Connectors
[    5.546151] [drm] Connector 0:
[    5.546152] [drm]   VGA
[    5.546155] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[    5.546157] [drm]   Encoders:
[    5.546159] [drm]     CRT1: INTERNAL_DAC1
[    5.546161] [drm] Connector 1:
[    5.546163] [drm]   DVI-D
[    5.546164] [drm]   HPD1
[    5.546167] [drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[    5.546169] [drm]   Encoders:
[    5.546171] [drm]     DFP1: INTERNAL_TMDS1
[    5.546173] [drm] Connector 2:
[    5.546175] [drm]   LVDS
[    5.546176] [drm]   Encoders:
[    5.546178] [drm]     LCD1: INTERNAL_LVDS
[    5.546180] [drm] Connector 3:
[    5.546181] [drm]   S-video
[    5.546183] [drm]   Encoders:
[    5.546184] [drm]     TV1: INTERNAL_DAC2
[    5.593627] [drm] fb mappable at 0xD0040000
[    5.593630] [drm] vram apper at 0xD0000000
[    5.593632] [drm] size 7056000
[    5.593634] [drm] fb depth is 24
[    5.593635] [drm]    pitch is 6720
[    5.637074] Console: switching to colour frame buffer device 210x65
[    5.648625] fb0: radeondrmfb frame buffer device
[    5.648627] registered panic notifier
[    5.648839] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
[    5.657829] Intel ICH 0000:00:1e.2: found PCI INT A -> IRQ 11
[    5.657841] Intel ICH 0000:00:1e.2: sharing IRQ 11 with 0000:00:1d.0
[    5.657850] Intel ICH 0000:00:1e.2: sharing IRQ 11 with 0000:00:1d.7
[    5.657864] Intel ICH 0000:00:1e.2: sharing IRQ 11 with 0000:01:00.0
[    5.657869] Intel ICH 0000:00:1e.2: sharing IRQ 11 with 0000:02:00.0
[    5.657913] Intel ICH 0000:00:1e.2: setting latency timer to 64
[    5.804995] ipw2200: Detected geography ZZD (13 802.11bg channels, 0 802.11a channels)
[    5.862265] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[    5.863950] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[    5.864998] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[    5.865766] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[    5.866517] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[    6.484039] intel8x0_measure_ac97_clock: measured 55335 usecs (2666 samples)
[    6.484042] intel8x0: clocking to 48000
[    6.484567] Intel ICH Modem 0000:00:1e.3: found PCI INT B -> IRQ 10
[    6.484580] Intel ICH Modem 0000:00:1e.3: sharing IRQ 10 with 0000:00:1d.1
[    6.484597] Intel ICH Modem 0000:00:1e.3: sharing IRQ 10 with 0000:00:1f.2
[    6.484611] Intel ICH Modem 0000:00:1e.3: sharing IRQ 10 with 0000:03:03.0
[    6.484628] Intel ICH Modem 0000:00:1e.3: setting latency timer to 64
[    6.588073] MC'97 1 converters and GPIO not ready (0xff00)
[    7.283228] EXT3 FS on sda2, internal journal
[    7.392622] loop: module loaded
[    7.970774] kjournald starting.  Commit interval 5 seconds
[    7.970974] EXT3 FS on sda1, internal journal
[    7.970979] EXT3-fs: mounted filesystem with ordered data mode.
[    8.597978] fuse init (API version 7.13)
[    8.890280] lib80211_crypt: registered algorithm 'WEP'
[   10.511428] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input7
[   10.916175] lp: driver loaded but no devices found
[   10.979343] ppdev: user-space parallel port driver
[   11.814404] Bluetooth: L2CAP ver 2.14
[   11.814410] Bluetooth: L2CAP socket layer initialized
[   11.851770] Bluetooth: RFCOMM TTY layer initialized
[   11.851778] Bluetooth: RFCOMM socket layer initialized
[   11.851783] Bluetooth: RFCOMM ver 1.11
[   11.897791] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   11.897798] Bluetooth: BNEP filters: protocol multicast
[   11.963070] Bridge firewalling registered
[   12.010690] Bluetooth: SCO (Voice Link) ver 0.6
[   12.010697] Bluetooth: SCO socket layer initialized
[   19.276190] eth1: no IPv6 routers present
00:00.0 0600: 8086:2590 (rev 03)
	Subsystem: 1028:0186
	Flags: bus master, fast devsel, latency 0
	Capabilities: <access denied>

00:01.0 0604: 8086:2591 (rev 03) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: dfd00000-dfefffff
	Prefetchable memory behind bridge: d0000000-d7ffffff
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.0 0604: 8086:2660 (rev 03) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: dfc00000-dfcfffff
	Prefetchable memory behind bridge: 0000000084000000-00000000841fffff
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1d.0 0c03: 8086:2658 (rev 03) (prog-if 00 [UHCI])
	Subsystem: 1028:0186
	Flags: bus master, medium devsel, latency 0, IRQ 11
	I/O ports at bf80 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.1 0c03: 8086:2659 (rev 03) (prog-if 00 [UHCI])
	Subsystem: 1028:0186
	Flags: bus master, medium devsel, latency 0, IRQ 10
	I/O ports at bf60 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.2 0c03: 8086:265a (rev 03) (prog-if 00 [UHCI])
	Subsystem: 1028:0186
	Flags: bus master, medium devsel, latency 0, IRQ 9
	I/O ports at bf40 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.3 0c03: 8086:265b (rev 03) (prog-if 00 [UHCI])
	Subsystem: 1028:0186
	Flags: bus master, medium devsel, latency 0, IRQ 5
	I/O ports at bf20 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.7 0c03: 8086:265c (rev 03) (prog-if 20 [EHCI])
	Subsystem: 1028:0186
	Flags: bus master, medium devsel, latency 0, IRQ 11
	Memory at ffa80800 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1e.0 0604: 8086:2448 (rev d3) (prog-if 01 [Subtractive decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=03, subordinate=07, sec-latency=32
	I/O behind bridge: 00003000-00003fff
	Memory behind bridge: dfb00000-dfbfffff
	Prefetchable memory behind bridge: 0000000080000000-0000000083ffffff
	Capabilities: <access denied>

00:1e.2 0401: 8086:266e (rev 03)
	Subsystem: 1028:0186
	Flags: bus master, medium devsel, latency 0, IRQ 11
	I/O ports at ed00 [size=256]
	I/O ports at ec40 [size=64]
	Memory at dffffe00 (32-bit, non-prefetchable) [size=512]
	Memory at dffffd00 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: Intel ICH

00:1e.3 0703: 8086:266d (rev 03) (prog-if 00 [Generic])
	Subsystem: 14f1:5423
	Flags: bus master, medium devsel, latency 0, IRQ 10
	I/O ports at ee00 [size=256]
	I/O ports at ec80 [size=128]
	Capabilities: <access denied>
	Kernel driver in use: Intel ICH Modem

00:1f.0 0601: 8086:2641 (rev 03)
	Subsystem: 1028:0186
	Flags: bus master, medium devsel, latency 0

00:1f.2 0101: 8086:2653 (rev 03) (prog-if 80 [Master])
	Subsystem: 1028:0186
	Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 10
	I/O ports at 01f0 [size=8]
	I/O ports at 03f4 [size=1]
	I/O ports at 0170 [size=8]
	I/O ports at 0374 [size=1]
	I/O ports at bfa0 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: ata_piix

01:00.0 0300: 1002:3150 (prog-if 00 [VGA controller])
	Subsystem: 1028:2002
	Flags: bus master, fast devsel, latency 0, IRQ 11
	Memory at d0000000 (32-bit, prefetchable) [size=128M]
	I/O ports at de00 [size=256]
	Memory at dfdf0000 (32-bit, non-prefetchable) [size=64K]
	Expansion ROM at dfe00000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: radeon

02:00.0 0200: 14e4:1677 (rev 01)
	Subsystem: 1028:0186
	Flags: bus master, fast devsel, latency 0, IRQ 11
	Memory at dfcf0000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: tg3

03:01.0 0607: 104c:8036
	Subsystem: 1028:0186
	Flags: bus master, medium devsel, latency 168, IRQ 5
	Memory at dfb00000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=03, secondary=04, subordinate=07, sec-latency=176
	Memory window 0: 80000000-83fff000 (prefetchable)
	Memory window 1: 88000000-8bfff000
	I/O window 0: 00003000-000030ff
	I/O window 1: 00003400-000034ff
	16-bit legacy interface ports at 0001
	Kernel driver in use: yenta_cardbus

03:01.5 0780: 104c:8038
	Subsystem: 1028:0186
	Flags: medium devsel, IRQ 5
	Memory at dfbfd000 (32-bit, non-prefetchable) [size=4K]
	Memory at dfbfe000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>

03:03.0 0280: 8086:4220 (rev 05)
	Subsystem: 8086:2722
	Flags: bus master, medium devsel, latency 64, IRQ 10
	Memory at dfbff000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: ipw2200

At Wed, 24 Nov 2010 16:24:19 +0000,
Ben Hutchings wrote:
> 
> On Wed, 2010-11-24 at 16:53 +0100, fulvio ciriaco wrote:
> > Package: linux-2.6
> > Version: 2.6.32+27
> > Severity: important
> > Tags: upstream
> > 
> > the normal booting process brings to an unusable system with frequent
> > 3-4 second periods in which the system is unresponsive.
> > The boot option pci=noacpi completely solves the problem.
> > The system is a laptop dell latitude d810.
> 
> This is insufficient information.  Please use the proper package name in
> future (e.g. linux-image-2.6.32-5-686) so that reportbug will gather
> useful information about your system.
> 
> Which version are you really running (the Debian version in the file
> /proc/version)?
> 
> Also send the output of 'lspci -vn', and the output of 'dmesg' when the
> system is booted without pci=noacpi.
> 
> Ben.
> 
> -- 
> Ben Hutchings
> Once a job is fouled up, anything done to improve it makes it worse.

Reply to: