[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#604627: linux-image-2.6.32-5-amd64: megasas: Failed to alloc kernel SGL buffer for IOCTL



Package: linux-2.6
Version: 2.6.32-27
Severity: important

Hi,

I am unable to do short and long tests initiated with smartd/smartctl.

calling 'smartctl -d megaraid,0 /dev/sda -t short' gives:

smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
Short offline self test failed [Cannot allocate memory]
megasas: Failed to alloc kernel SGL buffer for IOCTL


calling 'smartctl -i -d megaraid,0 /dev/sda' gives:

smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net

Device: HITACHI  HUS153014VLS300  Version: A5C0
Serial number:         XXXXXXXX
Device type: disk
Transport protocol: SAS
Local Time is: Tue Nov 23 08:29:25 2010 CET
Device supports SMART and is Enabled
Temperature Warning Enabled



dmesg info:
-----------
megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
megasas: 0x1000:0x0060:0x1000:0x1013: bus 96:slot 0:func 0
megaraid_sas 0000:60:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
megaraid_sas 0000:60:00.0: setting latency timer to 64



lspci info:
-----------
60:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 1078 (rev 04)
        Subsystem: LSI Logic / Symbios Logic Device 1013
        Flags: bus master, fast devsel, latency 0, IRQ 16
        Memory at dfa40000 (64-bit, non-prefetchable) [size=256K]
        I/O ports at 3000 [size=256]
        Memory at dfa00000 (64-bit, non-prefetchable) [size=256K]
        [virtual] Expansion ROM at 40100000 [disabled] [size=64K]
        Capabilities: [b0] Express Endpoint, MSI 00
        Capabilities: [c4] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable-
        Capabilities: [d4] MSI-X: Enable- Mask- TabSize=4
        Capabilities: [e0] Power Management version 2
        Capabilities: [ec] Vital Product Data <?>
        Capabilities: [100] Power Budgeting <?>
        Kernel driver in use: megaraid_sas
        Kernel modules: megaraid_sas


It seems I am not alone with this problem:

http://www.mail-archive.com/linux-poweredge@dell.com/msg02575.html

and lots of hits from 2007 and 2008 from RHEL.


-- Package-specific info:
** Kernel log: boot messages should be attached


-- System Information:
Debian Release: squeeze/sid
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-5-amd64 (SMP w/8 CPU cores)
Locale: LANG=de_DE@euro, LC_CTYPE=de_DE@euro (charmap=ISO-8859-15)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii  debconf [debconf-2.0]         1.5.36     Debian configuration management sy
ii  initramfs-tools [linux-initra 0.98.5     tools for generating an initramfs
ii  linux-base                    2.6.32-27  Linux image base package
ii  module-init-tools             3.12-1     tools for managing Linux kernel mo

Versions of packages linux-image-2.6.32-5-amd64 recommends:
ii  firmware-linux-free           2.6.32-27  Binary firmware for various driver

Versions of packages linux-image-2.6.32-5-amd64 suggests:
pn  grub | lilo                   <none>     (no description available)
pn  linux-doc-2.6.32              <none>     (no description available)

Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn  firmware-bnx2                 <none>     (no description available)
pn  firmware-bnx2x                <none>     (no description available)
pn  firmware-ipw2x00              <none>     (no description available)
pn  firmware-ivtv                 <none>     (no description available)
pn  firmware-iwlwifi              <none>     (no description available)
pn  firmware-linux                <none>     (no description available)
pn  firmware-linux-nonfree        <none>     (no description available)
pn  firmware-qlogic               <none>     (no description available)
pn  firmware-ralink               <none>     (no description available)
pn  xen-hypervisor                <none>     (no description available)

-- debconf information excluded



Reply to: