Bug#603802: linux-image-2.6.32-5-xen-amd64: DomU not really resumed (hangs) after restore from disk after Dom0 restart
Package: linux-2.6
Version: 2.6.32-27
Severity: important
If the kernel is used for paravirtual DomU, then the DomU is normally started orshutdown. Ifthe xm save and xm restore
is invoked explicitely,then the DomU also restores normally. Only in the case the DomU is
restored automatically via xendomains script facility on Dom0 start it is restored, so visible in the list
(xm list), but also after a lot of time it does not consume any processor time (shows always 0.0 as consumed processor time) and
after switch to the instance (xm console) the console is not responding to any key.
The same problem was (at least) also in the package version 2.6.32-25 and 2.6.32-23.
If starting the same DomU with kernel from package version 2.6.32-21, then it works correctly
-- Package-specific info:
** Version:
Linux version 2.6.32-5-xen-amd64 (Debian 2.6.32-27) (maks@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Sat Oct 30 17:04:10 UTC 2010
** Command line:
root=/dev/sda1 ro console=tty0 vga=773 swiotlb=65536
** Not tainted
** Kernel log:
[ 78.883733] vif8.1: no IPv6 routers present
[ 79.151732] vif8.2: no IPv6 routers present
[ 80.575300] device vif10.0 entered promiscuous mode
[ 80.579516] perbr: port 5(vif10.0) entering learning state
[ 83.099729] locbr: port 1(vif8.1) entering forwarding state
[ 83.435229] tap8.1: no IPv6 routers present
[ 83.487745] perbr: port 1(vif8.2) entering forwarding state
[ 83.655218] tap8.2: no IPv6 routers present
[ 83.791158] alloc irq_desc for 1210 on node 0
[ 83.791162] alloc kstat_irqs on node 0
[ 84.043221] tap8.0: no IPv6 routers present
[ 84.131388] device tap10.0 entered promiscuous mode
[ 84.132646] perbr: port 6(tap10.0) entering learning state
[ 84.181362] alloc irq_desc for 1209 on node 0
[ 84.181365] alloc kstat_irqs on node 0
[ 84.607717] vif9.0: no IPv6 routers present
[ 84.699718] vif9.2: no IPv6 routers present
[ 84.905506] vif9.1: no IPv6 routers present
[ 85.075718] vif9.3: no IPv6 routers present
[ 86.209157] vif9.6: no IPv6 routers present
[ 86.212755] vif9.4: no IPv6 routers present
[ 86.239161] vif9.5: no IPv6 routers present
[ 88.245200] locbr: port 2(tap8.1) entering forwarding state
[ 88.259224] perbr: port 2(tap8.2) entering forwarding state
[ 88.647215] tap9.2: no IPv6 routers present
[ 88.983212] tap9.1: no IPv6 routers present
[ 89.264206] tap9.6: no IPv6 routers present
[ 89.275208] tap9.3: no IPv6 routers present
[ 89.339202] tap9.0: no IPv6 routers present
[ 89.451215] perbr: port 3(vif9.0) entering forwarding state
[ 89.519208] devhazbr: port 1(vif9.1) entering forwarding state
[ 89.555234] tap9.5: no IPv6 routers present
[ 89.560204] tap9.4: no IPv6 routers present
[ 89.599212] devsafebr: port 3(vif9.2) entering forwarding state
[ 89.967706] tsthazbr: port 1(vif9.3) entering forwarding state
[ 90.147225] tstsafebr: port 1(vif9.4) entering forwarding state
[ 90.303212] prodhazbr: port 1(vif9.5) entering forwarding state
[ 90.513625] prodsafebr: port 6(vif9.6) entering forwarding state
[ 91.207274] vif10.0: no IPv6 routers present
[ 93.451213] perbr: port 4(tap9.0) entering forwarding state
[ 93.463200] devhazbr: port 2(tap9.1) entering forwarding state
[ 93.475204] devsafebr: port 4(tap9.2) entering forwarding state
[ 93.488702] tsthazbr: port 2(tap9.3) entering forwarding state
[ 93.665415] tstsafebr: port 2(tap9.4) entering forwarding state
[ 93.675194] prodhazbr: port 2(tap9.5) entering forwarding state
[ 93.675199] prodsafebr: port 7(tap9.6) entering forwarding state
[ 94.351238] tap10.0: no IPv6 routers present
[ 95.580705] perbr: port 5(vif10.0) entering forwarding state
[ 99.127185] perbr: port 6(tap10.0) entering forwarding state
[ 188.551522] prodsafebr: port 2(vif4.0) entering disabled state
[ 188.567361] prodsafebr: port 2(vif4.0) entering disabled state
[ 191.152151] device vif11.0 entered promiscuous mode
[ 191.156126] prodsafebr: port 2(vif11.0) entering learning state
[ 192.262854] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi)
[ 192.329113] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi)
[ 201.855967] vif11.0: no IPv6 routers present
[ 206.154960] prodsafebr: port 2(vif11.0) entering forwarding state
[ 758.603354] psmouse.c: Wheel Mouse at isa0060/serio1/input0 lost synchronization, throwing 2 bytes away.
[ 760.095479] psmouse.c: resync failed, issuing reconnect request
[ 1038.325725] prodsafebr: port 2(vif11.0) entering disabled state
[ 1038.337513] prodsafebr: port 2(vif11.0) entering disabled state
[ 1040.199589] device vif12.0 entered promiscuous mode
[ 1040.203589] prodsafebr: port 2(vif12.0) entering learning state
[ 1041.523037] blkback: ring-ref 770, event-channel 9, protocol 1 (x86_64-abi)
[ 1041.594397] blkback: ring-ref 771, event-channel 10, protocol 1 (x86_64-abi)
[ 1050.517183] vif12.0: no IPv6 routers present
[ 1055.201170] prodsafebr: port 2(vif12.0) entering forwarding state
[ 1921.350497] prodsafebr: port 2(vif12.0) entering disabled state
[ 1921.362225] prodsafebr: port 2(vif12.0) entering disabled state
[ 1924.161006] device vif13.0 entered promiscuous mode
[ 1924.164900] prodsafebr: port 2(vif13.0) entering learning state
[ 1924.848952] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi)
[ 1924.911654] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi)
[ 1934.542445] vif13.0: no IPv6 routers present
[ 1939.162447] prodsafebr: port 2(vif13.0) entering forwarding state
[ 2441.036988] psmouse.c: Wheel Mouse at isa0060/serio1/input0 lost synchronization, throwing 1 bytes away.
[ 3522.095864] prodsafebr: port 2(vif13.0) entering disabled state
[ 3522.117854] prodsafebr: port 2(vif13.0) entering disabled state
[ 3526.169073] device vif14.0 entered promiscuous mode
[ 3526.176916] prodsafebr: port 2(vif14.0) entering learning state
[ 3527.970429] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi)
[ 3528.003303] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi)
[ 3536.756647] vif14.0: no IPv6 routers present
[ 3541.172643] prodsafebr: port 2(vif14.0) entering forwarding state
[ 4272.117683] prodsafebr: port 2(vif14.0) entering disabled state
[ 4272.133477] prodsafebr: port 2(vif14.0) entering disabled state
[ 4274.282190] device vif15.0 entered promiscuous mode
[ 4274.285999] prodsafebr: port 2(vif15.0) entering learning state
[ 4274.998943] blkback: ring-ref 770, event-channel 9, protocol 1 (x86_64-abi)
[ 4275.051862] blkback: ring-ref 771, event-channel 10, protocol 1 (x86_64-abi)
[ 4285.108130] vif15.0: no IPv6 routers present
[ 4289.284121] prodsafebr: port 2(vif15.0) entering forwarding state
[ 4421.632525] prodsafebr: port 2(vif15.0) entering disabled state
[ 4421.644260] prodsafebr: port 2(vif15.0) entering disabled state
[ 4423.455405] device vif16.0 entered promiscuous mode
[ 4423.459100] prodsafebr: port 2(vif16.0) entering learning state
[ 4424.771009] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi)
[ 4424.835549] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi)
[ 4433.531967] vif16.0: no IPv6 routers present
[ 4438.461454] prodsafebr: port 2(vif16.0) entering forwarding state
** Model information
sys_vendor: HP
product_name: ProLiant DL320 G6
product_version:
chassis_vendor: HP
chassis_version:
bios_vendor: HP
bios_version: W07
** Loaded modules:
Module Size Used by
tun 10908 22
xt_tcpudp 2319 111
xt_physdev 1508 25
iptable_filter 2258 1
ip_tables 13899 1 iptable_filter
x_tables 12845 3 xt_tcpudp,xt_physdev,ip_tables
xen_evtchn 4339 11
xenfs 9600 1
cpufreq_stats 2659 0
cpufreq_conservative 5162 0
cpufreq_userspace 1992 0
cpufreq_powersave 902 0
sg 18760 0
fuse 50289 1
nfsd 254182 13
exportfs 3170 1 nfsd
nfs 241066 0
lockd 57603 2 nfsd,nfs
fscache 29834 1 nfs
nfs_acl 2031 2 nfsd,nfs
auth_rpcgss 33476 2 nfsd,nfs
sunrpc 161221 12 nfsd,nfs,lockd,nfs_acl,auth_rpcgss
bridge 39662 0
stp 1440 1 bridge
loop 11799 0
radeon 573452 0
ttm 40034 1 radeon
drm_kms_helper 20065 1 radeon
drm 143377 3 radeon,ttm,drm_kms_helper
radeonfb 52374 1
fb_ddc 1421 1 radeonfb
i2c_algo_bit 4225 2 radeon,radeonfb
hpilo 6268 0
ipmi_si 30960 0
psmouse 49777 0
i2c_core 15712 6 radeon,drm_kms_helper,drm,radeonfb,fb_ddc,i2c_algo_bit
ipmi_msghandler 26634 1 ipmi_si
shpchp 26264 0
hpwdt 4916 0
pcspkr 1699 0
pci_hotplug 21203 1 shpchp
serio_raw 3752 0
evdev 7352 4
container 2389 0
button 4650 0
processor 35781 0
acpi_processor 5087 1 processor,[permanent]
ext3 106518 1
jbd 37085 1 ext3
mbcache 5050 1 ext3
dm_mod 53770 57
ses 5128 0
enclosure 5503 1 ses
sd_mod 29777 3
crc_t10dif 1276 1 sd_mod
usbhid 33292 0
hid 62857 1 usbhid
ata_generic 3015 0
uhci_hcd 18521 0
aacraid 59779 4
ata_piix 21124 0
tg3 95727 0
libphy 14054 1 tg3
ehci_hcd 31135 0
libata 133616 2 ata_generic,ata_piix
usbcore 121938 4 usbhid,uhci_hcd,ehci_hcd
nls_base 6377 1 usbcore
thermal 11674 0
scsi_mod 122117 5 sg,ses,sd_mod,aacraid,libata
thermal_sys 11942 2 processor,thermal
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 5500 I/O Hub to ESI Port [8086:3403] (rev 13)
Subsystem: Hewlett-Packard Company Device [103c:330b]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 [8086:3408] (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0d, subordinate=0f, sec-latency=0
Memory behind bridge: fbe00000-fbffffff
Prefetchable memory behind bridge: 0000000080000000-00000000800fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 [8086:340a] (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=07, subordinate=09, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:07.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 [8086:340e] (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0a, subordinate=0c, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:0d.0 Host bridge [0600]: Intel Corporation Device [8086:343a] (rev 13)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:0d.1 Host bridge [0600]: Intel Corporation Device [8086:343b] (rev 13)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:0d.2 Host bridge [0600]: Intel Corporation Device [8086:343c] (rev 13)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:0d.3 Host bridge [0600]: Intel Corporation Device [8086:343d] (rev 13)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:0d.4 Host bridge [0600]: Intel Corporation 5520/5500/X58 Physical Layer Port 0 [8086:3418] (rev 13)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:0d.5 Host bridge [0600]: Intel Corporation 5520/5500 Physical Layer Port 1 [8086:3419] (rev 13)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:0d.6 Host bridge [0600]: Intel Corporation Device [8086:341a] (rev 13)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:0e.0 Host bridge [0600]: Intel Corporation Device [8086:341c] (rev 13)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:0e.1 Host bridge [0600]: Intel Corporation Device [8086:341d] (rev 13)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:0e.2 Host bridge [0600]: Intel Corporation Device [8086:341e] (rev 13)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:0e.3 Host bridge [0600]: Intel Corporation Device [8086:341f] (rev 13)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:0e.4 Host bridge [0600]: Intel Corporation Device [8086:3439] (rev 13)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:14.0 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers [8086:342e] (rev 13) (prog-if 00 [8259])
Subsystem: Device [003c:000b]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:14.1 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers [8086:3422] (rev 13) (prog-if 00 [8259])
Subsystem: Device [003c:000b]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:14.2 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers [8086:3423] (rev 13) (prog-if 00 [8259])
Subsystem: Device [003c:000b]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:1a.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:330d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 1000 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38] (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:330d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 23
Region 4: I/O ports at 1020 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:330d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at 1040 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:330d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 0: Memory at fbaf0000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 [8086:3a40] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
Memory behind bridge: fbd00000-fbdfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.4 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 [8086:3a48] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=06, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:330d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 1060 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:330d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 23
Region 4: I/O ports at 1080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:330d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at 10a0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:330d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at fbae0000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 90) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 00002000-00003fff
Memory behind bridge: fbb00000-fbcfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f7ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller [8086:3a16]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt
00:1f.2 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 [8086:3a20] (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Hewlett-Packard Company Device [103c:330d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 10c0 [size=8]
Region 1: I/O ports at 10c8 [size=4]
Region 2: I/O ports at 10d0 [size=8]
Region 3: I/O ports at 10d8 [size=4]
Region 4: I/O ports at 10e0 [size=16]
Region 5: I/O ports at 10f0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_generic, ata_piix
00:1f.5 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 [8086:3a26] (prog-if 85 [Master SecO PriO])
Subsystem: Hewlett-Packard Company Device [103c:330d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 1400 [size=8]
Region 1: I/O ports at 1408 [size=4]
Region 2: I/O ports at 1410 [size=8]
Region 3: I/O ports at 1418 [size=4]
Region 4: I/O ports at 1420 [size=16]
Region 5: I/O ports at 1430 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_generic, ata_piix
01:03.0 VGA compatible controller [0300]: ATI Technologies Inc ES1000 [1002:515e] (rev 02) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device [103c:31fb]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 3000 [size=256]
Region 2: Memory at fbcf0000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at fbb00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeonfb
Kernel modules: radeonfb, radeon
01:04.0 System peripheral [0880]: Compaq Computer Corporation Integrated Lights Out Controller [0e11:b203] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:3305]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at 2800 [size=256]
Region 1: Memory at fbce0000 (32-bit, non-prefetchable) [size=512]
Capabilities: <access denied>
Kernel driver in use: hpwdt
Kernel modules: hpwdt
01:04.2 System peripheral [0880]: Compaq Computer Corporation Integrated Lights Out Processor [0e11:b204] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:3305]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 22
BIST result: 00
Region 0: I/O ports at 3400 [size=256]
Region 1: Memory at fbcd0000 (32-bit, non-prefetchable) [size=2K]
Region 2: Memory at fbcc0000 (32-bit, non-prefetchable) [size=16K]
Region 3: Memory at fbc00000 (32-bit, non-prefetchable) [size=512K]
[virtual] Expansion ROM at fbb20000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: hpilo
Kernel modules: hpilo
01:04.4 USB Controller [0c03]: Hewlett-Packard Company Proliant iLO2/iLO3 virtual USB controller [103c:3300] (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:3305]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin B routed to IRQ 22
Region 4: I/O ports at 3800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
01:04.6 IPMI SMIC interface [0c07]: Hewlett-Packard Company Proliant iLO2 virtual UART [103c:3302] (prog-if 01)
Subsystem: Hewlett-Packard Company Device [103c:3305]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 21
Region 0: Memory at fbbf0000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ipmi_si
Kernel modules: ipmi_si
02:00.0 PCI bridge [0604]: Broadcom EPB PCI-Express to PCI-X Bridge [1166:0103] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=02, secondary=03, subordinate=03, sec-latency=64
Memory behind bridge: fbd00000-fbdfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel modules: shpchp
03:04.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5715 Gigabit Ethernet [14e4:1678] (rev a3)
Subsystem: Hewlett-Packard Company NC326i PCIe Dual Port Gigabit Server Adapter [103c:703e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 1250
Region 0: Memory at fbdf0000 (64-bit, non-prefetchable) [size=64K]
Region 2: Memory at fbde0000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: tg3
Kernel modules: tg3
03:04.1 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5715 Gigabit Ethernet [14e4:1678] (rev a3)
Subsystem: Hewlett-Packard Company NC326i PCIe Dual Port Gigabit Server Adapter [103c:703e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fbdd0000 (64-bit, non-prefetchable) [size=64K]
Region 2: Memory at fbdc0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: tg3
Kernel modules: tg3
0d:00.0 RAID bus controller [0104]: Adaptec AAC-RAID [9005:0285] (rev 09)
Subsystem: Adaptec ASR-2405 [9005:02d5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 28
Region 0: Memory at fbe00000 (64-bit, non-prefetchable) [size=2M]
[virtual] Expansion ROM at 80000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: aacraid
Kernel modules: aacraid
** Sound cards:
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-xen-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-xen-amd64 depends on:
ii debconf [debconf-2.0] 1.5.36 Debian configuration management sy
ii initramfs-tools 0.98.5 tools for generating an initramfs
ii linux-base 2.6.32-27 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-xen-amd64 recommends:
ii firmware-linux-free 2.6.32-27 Binary firmware for various driver
Versions of packages linux-image-2.6.32-5-xen-amd64 suggests:
ii grub-legacy [grub] 0.97-63 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-xen-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
ii xen-hypervisor-4.0-amd64 [xen 4.0.1-1 The Xen Hypervisor on AMD64
-- debconf information:
linux-image-2.6.32-5-xen-amd64/prerm/would-invalidate-boot-loader-2.6.32-5-xen-amd64: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-5-xen-amd64/postinst/bootloader-test-error-2.6.32-5-xen-amd64:
linux-image-2.6.32-5-xen-amd64/postinst/ignoring-do-bootloader-2.6.32-5-xen-amd64:
linux-image-2.6.32-5-xen-amd64/prerm/removing-running-kernel-2.6.32-5-xen-amd64: true
linux-image-2.6.32-5-xen-amd64/postinst/depmod-error-initrd-2.6.32-5-xen-amd64: false
* linux-image-2.6.32-5-xen-amd64/postinst/missing-firmware-2.6.32-5-xen-amd64:
linux-image-2.6.32-5-xen-amd64/postinst/bootloader-error-2.6.32-5-xen-amd64:
Reply to: