Bug#595502: linux-image-2.6.32-5-mckinley: panics while loading INIT, IOMMU out of mapping resources
On Mon, Nov 15, 2010 at 1:40 PM, Ben Hutchings <ben@decadent.org.uk> wrote:
> On Mon, 2010-11-15 at 13:10 +0100, Thibaut VARENE wrote:
>> On Tue, Sep 14, 2010 at 10:37 AM, Thibaut VARÈNE <varenet@debian.org> wrote:
>> >>>>>>> Package: linux-image-2.6.32-5-mckinley
>> >>>>>>> Version: 2.6.32-20
>> >>>>>>> Severity: grave
>> >>>>>>> Justification: renders system unusable
>> >>>>>>>
>> >>>>>>>
>> >>>>>>> System boots fine with linux-image-2.6.32-3-mckinley 2.6.32-9.
>> >>>>>>> Panics with 2.6.32-20 with: I/O MMU @ c0000000fed01000 is out of
>> >>>>>>> mapping
>> >>>>>>> resources
>>
>> FWIW, this bug still affects 2.6.32-27, and renders the system
>> completely unusable.
>> I've had to stick with 2.6.32-9 so far.
>
> Note that dann no longer works for HP, which probably makes it quite
> hard for him to do IA64 testing.
>
> Since you apparently still haven't tested Linux 2.6.35, we're waiting
> for you to do that. Actually, make that 2.6.36 now.
As expected, 2.6.36.1 from experimental fucked up my raid
"gracefully", just as 2.6.35-21 did. I'm so very very happy right now,
thank you. Needless to say, I'm not "testing" any other kernel on that
machine. I suppose ia64 has porters, too?
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.36-trunk-mckinley (Debian
2.6.36-1~experimental.1) (max@stro.at) (gcc version 4.4.5 (Debian
4.4.5-2) ) #1 SMP Thu Oct 28 18:38:50 UTC 2010
[ 0.000000] EFI v1.10 by HP: SALsystab=0x3fb38000 ACPI
2.0=0x3fb2e000 SMBIOS=0x3fb3a000 HCDP=0x3fb2c000
[ 0.000000] booting generic kernel on platform hpzx1
[ 0.000000] PCDP: v0 at 0x3fb2c000
[ 0.000000] Early serial console at MMIO 0xff5e0000 (options '9600n8')
[ 0.000000] bootconsole [uart8250] enabled
[ 0.000000] ACPI: RSDP 000000003fb2e000 00028 (v02 HP)
[ 0.000000] ACPI: XSDT 000000003fb2e02c 0007C (v01 HP zx2000
00000000 HP 00000000)
[ 0.000000] ACPI: FACP 000000003fb373e0 000F4 (v03 HP zx2000
00000000 HP 00000000)
[ 0.000000] ACPI Warning: 32/64X length mismatch in Gpe0Block:
32/16 (20100702/tbfadt-526)
[ 0.000000] ACPI Warning: 32/64X length mismatch in Gpe1Block:
32/16 (20100702/tbfadt-526)
[ 0.000000] ACPI: DSDT 000000003fb2e0e0 05781 (v01 HP zx2000
00000007 INTL 02012044)
[ 0.000000] ACPI: FACS 000000003fb374d8 00040
[ 0.000000] ACPI: SPCR 000000003fb37518 00050 (v01 HP zx2000
00000000 HP 00000000)
[ 0.000000] ACPI: DBGP 000000003fb37568 00034 (v01 HP zx2000
00000000 HP 00000000)
[ 0.000000] ACPI: APIC 000000003fb37628 00084 (v01 HP zx2000
00000000 HP 00000000)
[ 0.000000] ACPI: SPMI 000000003fb375a0 00050 (v04 HP zx2000
00000000 HP 00000000)
[ 0.000000] ACPI: CPEP 000000003fb375f0 00034 (v01 HP zx2000
00000000 HP 00000000)
[ 0.000000] ACPI: SSDT 000000003fb33870 00A14 (v01 HP zx2000
00000006 INTL 02012044)
[ 0.000000] ACPI: SSDT 000000003fb34290 022E2 (v01 HP zx2000
00000006 INTL 02012044)
[ 0.000000] ACPI: SSDT 000000003fb36580 00342 (v01 HP zx2000
00000006 INTL 02012044)
[ 0.000000] ACPI: SSDT 000000003fb368d0 00A16 (v01 HP zx2000
00000006 INTL 02012044)
[ 0.000000] ACPI: SSDT 000000003fb372f0 000EB (v01 HP zx2000
00000006 INTL 02012044)
[ 0.000000] ACPI: Local APIC address c0000000fee00000
[ 0.000000] 1 CPUs available, 1 CPUs total
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] warning: skipping physical page 0
[ 0.000000] warning: skipping physical page 0
[ 0.000000] warning: skipping physical page 0
[ 0.000000] warning: skipping physical page 0
[ 0.000000] Initial ramdisk at: 0xe00000407de98000 (17806407 bytes)
[ 0.000000] SAL 3.1: HP version 2.31
[ 0.000000] SAL Platform features: None
[ 0.000000] SAL: AP wakeup using external interrupt vector 0xff
[ 0.000000] ACPI: Local APIC address c0000000fee00000
[ 0.000000] GSI 47 (level, low) -> CPU 0 (0x0000) vector 49
[ 0.000000] MCA related initialization done
[ 0.000000] warning: skipping physical page 0
[ 0.000000] Virtual mem_map starts at 0xa0007fffc7900000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000001 -> 0x00040000
[ 0.000000] Normal 0x00040000 -> 0x01020000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0x00000001 -> 0x0000fd79
[ 0.000000] 0: 0x0000fec0 -> 0x0000fecb
[ 0.000000] 0: 0x01010000 -> 0x0101ff5a
[ 0.000000] 0: 0x0101ff69 -> 0x0101ff84
[ 0.000000] 0: 0x0101ffa0 -> 0x0101fff2
[ 0.000000] pcpu-alloc: s31104 r8192 d222848 u262144 alloc=16*16384
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Node order, mobility grouping off.
Total pages: 72586
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line:
BOOT_IMAGE=atapi0:/EFI/debian/vmlinuz root=/dev/md1 ro
[ 0.000000] PID hash table entries: 4096 (order: 1, 32768 bytes)
[ 0.000000] Memory: 2039408k/2055808k available (7296k code, 46656k
reserved, 4479k data, 1264k init)
[ 0.000000] Leaving McKinley Errata 9 workaround enabled
[ 0.000000] SLUB: Genslabs=16, HWalign=128, Order=0-3,
MinObjects=0, CPUs=1, Nodes=256
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:1024
[ 0.000000] Console: colour dummy device 80x25
[ 0.060000] Calibrating delay loop... 1347.58 BogoMIPS (lpj=2695168)
[ 0.236005] pid_max: default: 32768 minimum: 301
[ 0.296073] Security Framework initialized
[ 0.348012] SELinux: Disabled at boot.
[ 0.400186] Dentry cache hash table entries: 262144 (order: 7, 2097152 bytes)
[ 0.498399] Inode-cache hash table entries: 131072 (order: 6, 1048576 bytes)
[ 0.589257] Mount-cache hash table entries: 1024
[ 0.652447] Initializing cgroup subsys ns
[ 0.704010] Initializing cgroup subsys cpuacct
[ 0.764011] Initializing cgroup subsys devices
[ 0.820006] Initializing cgroup subsys freezer
[ 0.880006] Initializing cgroup subsys net_cls
[ 0.940006] Initializing cgroup subsys blkio
[ 0.996070] ACPI: Core revision 20100702
[ 1.053323] Boot processor id 0x0/0x0
[ 1.100227] Brought up 1 CPUs
[ 1.140007] Total of 1 processors activated (1347.58 BogoMIPS).
[ 1.216699] devtmpfs: initialized
[ 1.260476] DMI 2.3 present.
[ 1.300196] regulator: core version 0.5
[ 1.348103] NET: Registered protocol family 16
[ 1.408193] ACPI: bus type pci registered
[ 1.460886] bio: create slab <bio-0> at 0
[ 1.543107] ACPI: Interpreter enabled
[ 1.588004] ACPI: (supports S0 S5)
[ 1.635441] ACPI: Using IOSAPIC for interrupt routing
[ 1.973588] ACPI: No dock devices found.
[ 2.044308] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 2.163829] pci_root HWP0003:00: host bridge window [io 0x0000-0x3fff]
[ 2.248008] pci_root HWP0003:00: host bridge window [mem
0x80000000-0x9fffffff]
[ 2.344007] pci_root HWP0003:00: host bridge window [mem
0x80004000000-0x80103fffffe]
[ 2.480560] ACPI: PCI Root Bridge [PCI4] (domain 0000 [bus 80-9f])
[ 2.600166] pci_root HWP0002:00: host bridge window [io 0x4000-0x9fff]
[ 2.684007] pci_root HWP0002:00: host bridge window [mem
0xa0000000-0xcfffffff]
[ 2.780007] pci_root HWP0002:00: host bridge window [mem
0xc0004000000-0xc0103fffffe]
[ 2.952561] ACPI: PCI Root Bridge [PCI5] (domain 0000 [bus a0-bf])
[ 3.082637] pci_root HWP0002:01: host bridge window [mem
0xff5e0000-0xff5e0007]
[ 3.176007] pci_root HWP0002:01: host bridge window [mem
0xff5e2000-0xff5e2007]
[ 3.272009] pci_root HWP0002:01: host bridge window [io 0xa000-0xbfff]
[ 3.360007] pci_root HWP0002:01: host bridge window [mem
0xd0000000-0xdfffffff]
[ 3.456007] pci_root HWP0002:01: host bridge window [mem
0xd0004000000-0xd0103fffffe]
[ 3.642539] ACPI: PCI Root Bridge [PCI6] (domain 0000 [bus c0-ff])
[ 3.763293] pci_root HWP0002:02: host bridge window [io 0xc000-0xffff]
[ 3.848007] pci_root HWP0002:02: host bridge window [mem
0xe0000000-0xfdffffff]
[ 3.944007] pci_root HWP0002:02: host bridge window [mem
0xe0004000000-0xe0103fffffe]
[ 4.062637] vgaarb: loaded
[ 4.153644] IOC: zx1 2.3 HPA 0xfed01000 IOVA space 1024Mb at 0x40000000
[ 4.340258] Switching to clocksource itc
[ 4.388097] pnp: PnP ACPI init
[ 4.432202] ACPI: bus type pnp registered
[ 4.684017] GSI 45 (edge, high) -> CPU 0 (0x0000) vector 50
[ 4.758894] GSI 46 (edge, high) -> CPU 0 (0x0000) vector 51
[ 4.868208] pnp: PnP ACPI: found 8 devices
[ 4.922141] ACPI: ACPI bus type pnp unregistered
[ 4.986058] NET: Registered protocol family 2
[ 5.043512] IP route cache hash table entries: 16384 (order: 3, 131072 bytes)
[ 5.138125] TCP established hash table entries: 65536 (order: 6,
1048576 bytes)
[ 5.235649] TCP bind hash table entries: 65536 (order: 6, 1048576 bytes)
[ 5.325264] TCP: Hash tables configured (established 65536 bind 65536)
[ 5.411283] TCP reno registered
[ 5.452623] UDP hash table entries: 1024 (order: 1, 32768 bytes)
[ 5.531837] UDP-Lite hash table entries: 1024 (order: 1, 32768 bytes)
[ 5.616954] NET: Registered protocol family 1
[ 5.674954] Unpacking initramfs...
[ 7.031907] Freeing initrd memory: 17376kB freed
[ 7.093564] perfmon: version 2.0 IRQ 238
[ 7.145173] perfmon: Itanium 2 PMU detected, 16 PMCs, 18 PMDs, 4
counters (47 bits)
[ 7.246827] perfmon: added sampling format default_format
[ 7.317979] perfmon_default_smpl: default_format v2.0 registered
[ 7.397386] audit: initializing netlink socket (disabled)
[ 7.468493] type=2000 audit(1289825865.467:1): initialized
[ 7.559556] HugeTLB registered 256 MB page size, pre-allocated 0 pages
[ 7.648466] VFS: Disk quotas dquot_6.5.2
[ 7.700270] Dquot-cache hash table entries: 2048 (order 0, 16384 bytes)
[ 7.787601] msgmni has been set to 4017
[ 7.838416] alg: No test for stdrng (krng)
[ 7.892391] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 253)
[ 7.989902] io scheduler noop registered
[ 8.041541] io scheduler deadline registered
[ 8.097870] io scheduler cfq registered (default)
[ 8.160167] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 8.257591] ACPI: Power Button [PWRF]
[ 8.305878] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
[ 8.403292] ACPI: Sleep Button [SLPF]
[ 8.621682] thermal LNXTHERM:01: registered as thermal_zone0
[ 8.696170] ACPI: Thermal Zone [THM0] (27 C)
[ 8.752688] Linux agpgart interface v0.103
[ 8.886168] agpgart: HP ZX1 IOC: IOPDIR shared with sba_iommu
[ 8.961875] agpgart: No reserved IO PDIR entry found; GART disabled
[ 9.061865] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 9.165209] 00:05: ttyS0 at MMIO 0xff5e0000 (irq = 50) is a 16550A
[ 9.246631] console [ttyS0] enabled, bootconsole disabled
[ 9.246631] console [ttyS0] enabled, bootconsole disabled
[ 9.402847] 00:06: ttyS1 at MMIO 0xff5e2000 (irq = 51) is a 16550A
[ 9.477338] mice: PS/2 mouse device common for all mice
[ 9.540128] rtc-efi rtc-efi: rtc core: registered rtc-efi as rtc0
[ 9.613889] TCP cubic registered
[ 9.652600] NET: Registered protocol family 17
[ 9.705942] Registering the dns_resolver key type
[ 9.762590] registered taskstats version 1
[ 9.815749] rtc-efi rtc-efi: setting system clock to 2010-11-15
12:57:48 UTC (1289825868)
[ 9.914152] Freeing unused kernel memory: 1264kB freed
Loading, please wait...
[ 10.012299] udev[46]: starting version 163
[ 10.390788] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k6-NAPI
[ 10.475388] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 10.686961] SCSI subsystem initialized
[ 10.732951] usbcore: registered new interface driver usbfs
[ 10.857052] usbcore: registered new interface driver hub
[ 10.956101] GSI 43 (level, low) -> CPU 0 (0x0000) vector 52
[ 11.022915] pata_cmd64x 0000:a0:02.0: PCI INT A -> GSI 43 (level,
low) -> IRQ 52
[ 11.112152] usbcore: registered new device driver usb
[ 11.184228] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 11.264116] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 11.339005] scsi0 : pata_cmd64x
[ 11.377025] scsi1 : pata_cmd64x
[ 11.415165] ata1: PATA max UDMA/100 cmd 0xa0e8 ctl 0xa0f4 bmdma 0xa0d0 irq 52
[ 11.500797] ata2: PATA max UDMA/100 cmd 0xa0e0 ctl 0xa0f0 bmdma 0xa0d8 irq 52
[ 11.587527] GSI 42 (level, low) -> CPU 0 (0x0000) vector 53
[ 11.654417] e1000 0000:a0:03.0: PCI INT A -> GSI 42 (level, low) -> IRQ 53
[ 11.756901] ata1.00: ATA-7: Maxtor 6Y120L0, YAR41BW0, max UDMA/133
[ 11.831063] ata1.00: 240121728 sectors, multi 0: LBA
[ 12.122797] ata1.01: ATA-7: Maxtor 6Y120L0, YAR41BW0, max UDMA/133
[ 12.196964] ata1.01: 240121728 sectors, multi 0: LBA
[ 12.264767] ata1.00: configured for UDMA/100
[ 12.326371] e1000 0000:a0:03.0: eth0: (PCI:33MHz:32-bit) 00:30:6e:38:5a:ec
[ 12.408831] e1000 0000:a0:03.0: eth0: Intel(R) PRO/1000 Network Connection
[ 12.492406] GSI 38 (level, low) -> CPU 0 (0x0000) vector 54
[ 12.559226] ohci_hcd 0000:a0:01.0: PCI INT A -> GSI 38 (level, low) -> IRQ 54
[ 12.644856] ata1.01: configured for UDMA/100
[ 12.696607] scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y120L0
YAR4 PQ: 0 ANSI: 5
[ 12.794827] scsi 0:0:1:0: Direct-Access ATA Maxtor 6Y120L0
YAR4 PQ: 0 ANSI: 5
[ 12.892331] ohci_hcd 0000:a0:01.0: OHCI Host Controller
[ 12.956174] ohci_hcd 0000:a0:01.0: new USB bus registered, assigned
bus number 1
[ 13.045295] ohci_hcd 0000:a0:01.0: irq 54, io mem 0xd0022000
[ 13.114128] ata2.00: ATAPI: HL-DT-ST GCE-8481B, 1.07, max UDMA/33
[ 13.698877] ata2.00: configured for UDMA/33
[ 13.749118] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 13.830590] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 13.917223] usb usb1: Product: OHCI Host Controller
[ 13.975742] usb usb1: Manufacturer: Linux 2.6.36-trunk-mckinley ohci_hcd
[ 14.056167] usb usb1: SerialNumber: 0000:a0:01.0
[ 14.112264] scsi 1:0:0:0: CD-ROM HL-DT-ST CD-RW
GCE-8481B 1.07 PQ: 0 ANSI: 5
[ 14.209824] hub 1-0:1.0: USB hub found
[ 14.254858] hub 1-0:1.0: 3 ports detected
[ 14.303530] GSI 40 (level, low) -> CPU 0 (0x0000) vector 55
[ 14.370413] ehci_hcd 0000:a0:01.2: PCI INT C -> GSI 40 (level, low) -> IRQ 55
[ 14.462105] ehci_hcd 0000:a0:01.2: EHCI Host Controller
[ 14.525093] ehci_hcd 0000:a0:01.2: new USB bus registered, assigned
bus number 2
[ 14.636344] ehci_hcd 0000:a0:01.2: irq 55, io mem 0xd0020000
[ 14.716171] ehci_hcd 0000:a0:01.2: USB 2.0 started, EHCI 0.95
[ 14.785404] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 14.866834] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 14.953481] usb usb2: Product: EHCI Host Controller
[ 15.012002] usb usb2: Manufacturer: Linux 2.6.36-trunk-mckinley ehci_hcd
[ 15.092426] usb usb2: SerialNumber: 0000:a0:01.2
[ 15.148567] hub 2-0:1.0: USB hub found
[ 15.193548] hub 2-0:1.0: 5 ports detected
[ 15.242344] GSI 39 (level, low) -> CPU 0 (0x0000) vector 56
[ 15.309191] ohci_hcd 0000:a0:01.1: PCI INT B -> GSI 39 (level, low) -> IRQ 56
[ 15.395953] ohci_hcd 0000:a0:01.1: OHCI Host Controller
[ 15.458935] ohci_hcd 0000:a0:01.1: new USB bus registered, assigned
bus number 3
[ 15.548821] ohci_hcd 0000:a0:01.1: irq 56, io mem 0xd0021000
[ 16.182887] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 16.264293] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 16.350952] usb usb3: Product: OHCI Host Controller
[ 16.409473] usb usb3: Manufacturer: Linux 2.6.36-trunk-mckinley ohci_hcd
[ 16.489889] usb usb3: SerialNumber: 0000:a0:01.1
[ 16.545996] hub 3-0:1.0: USB hub found
[ 16.590915] hub 3-0:1.0: 2 ports detected
[ 16.682811] sd 0:0:0:0: [sda] 240121728 512-byte logical blocks:
(122 GB/114 GiB)
[ 16.773774] sd 0:0:1:0: [sdb] 240121728 512-byte logical blocks:
(122 GB/114 GiB)
[ 16.864119] sd 0:0:0:0: [sda] Write Protect is off
[ 16.922113] sr0: scsi3-mmc drive: 4x/40x writer cd/rw xa/form2 cdda tray
[ 17.002451] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 17.065593] sd 0:0:1:0: [sdb] Write Protect is off
[ 17.123429] sd 0:0:1:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 17.232375] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 17.405808] sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6
[ 17.460831] sda: sda1 sda2 sda3 sda4 sda5 sda6
[ 17.519146] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 17.578573] sd 0:0:0:0: [sda] Attached SCSI disk
[ 17.670964] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 17.736427] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 17.802608] sr 1:0:0:0: Attached scsi generic sg2 type 5
Begin: Loading essential drivers ... done.
Begi[ 18.309711] md: raid1 personality registered for level 1
n: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top
... Begin: LoadingSuccess: loaded module raid1.
done.
Begin: Assembling all MD arrays ... [ 18.621549] md: md0 stopped.
[ 18.662838] md: bind<sdb2>
[ 18.722774] md: bind<sda2>
[ 18.757712] md/raid1:md0: active with 2 out of 2 mirrors
[ 18.821543] md0: detected capacity change from 0 to 999882752
mdadm: /dev/md0 [ 18.897457] md0: detected capacity change from 0 to 999882752
has been started[ 18.977841] md0: unknown partition table
with 2 drives.
[ 19.286461] md: md1 stopped.
[ 19.326110] md: bind<sdb3>
[ 19.376050] md: bind<sda3>
[ 19.414465] md/raid1:md1: active with 2 out of 2 mirrors
[ 19.478242] md1: detected capacity change from 0 to 4999872512
mdadm: /dev/md1 [ 19.553433] md1: detected capacity change from 0 to
4999872512
has been started[ 19.638308] md1: unknown partition table
with 2 drives.
[ 19.943900] md: md2 stopped.
[ 20.010191] md: bind<sdb4>
[ 20.075220] md: bind<sda4>
[ 20.110545] md/raid1:md2: active with 2 out of 2 mirrors
[ 20.174719] md2: detected capacity change from 0 to 9999876096
mdadm: /dev/md2 [ 20.251669] md2: detected capacity change from 0 to
9999876096
has been started[ 20.344203] md2: unknown partition table
with 2 drives.
[ 20.709405] md: md3 stopped.
[ 20.755828] md: bind<sdb5>
[ 20.815986] md: bind<sda5>
[ 20.850972] md/raid1:md3: active with 2 out of 2 mirrors
[ 20.914775] md3: detected capacity change from 0 to 9999876096
mdadm: /dev/md3 [ 20.989424] md3: detected capacity change from 0 to
9999876096
has been started[ 21.075723] md3: unknown partition table
with 2 drives.
[ 21.391767] md: md4 stopped.
[ 21.430273] md: bind<sdb6>
[ 21.483152] md: bind<sda6>
[ 21.519635] md/raid1:md4: active with 2 out of 2 mirrors
[ 21.583859] md4: detected capacity change from 0 to 96842219520
mdadm: /dev/md4 [ 21.657451] md4: detected capacity change from 0 to
96842219520
has been started[ 21.746656] md4: unknown partition table
with 2 drives.
Success: assembled all arrays.
done.
done.
Begin: Running /scripts/local-premount ... done.
[ 21.966054] EXT3-fs: barriers not enabled
[ 22.023652] kjournald starting. Commit interval 5 seconds
[ 22.089496] EXT3-fs (md1): mounted filesystem with ordered data mode
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
INIT: version 2.88 booting
Using makefile-style concurrent boot in runlevel S.
Starting the hotplug events dispatcher: udevdudevd[381]: nss_ldap:
could not [ 24.649509] udev[382]: starting version 163
[ 30.734695] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of
mapping resources, 8192 5 ffff
n't contact LDAP[ 30.839967] ata1.01: exception Emask 0x0 SAct 0x0
SErr 0x0 action 0x0
server
udevd[[ 30.933749] ata1.01: failed command: READ DMA
382]: nss_ldap: [ 31.002695] ata1.01: cmd
c8/00:80:c6:1e:90/00:00:00:00:00/f0 tag 0 dma 65536 in
[ 31.002699] res 50/00:00:bd:1e:90/00:00:00:00:00/f0 Emask
0x40 (internal error)
could not search[ 31.204098] ata1.01: status: { DRDY }
LDAP server - Server is unavail[ 31.288826] ata1.00: configured for UDMA/100
able
Synthesiz[ 31.364825] ata1.01: configured for UDMA/100
ing the initial [ 31.417033] ata1: EH complete
hotplug events..[ 31.470320] sba_alloc_range: I/O MMU @
c0000000fed01000 isout of mapping resources, 8192 5 ffff
.done.
Waiting [ 31.593484] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
for /dev to be f[ 31.684231] ata1.01: failed command: READ DMA
ully populated..[ 31.753158] ata1.01: cmd
c8/00:80:c6:1e:90/00:00:00:00:00/f0 tag 0 dma 65536 in
[ 31.753161] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask
0x40 (internal error)
.done.
Setting [ 31.954534] ata1.01: status: { DRDY }
parameters of disc: (none).
Gen[ 32.036829] ata1.00: configured for UDMA/100
erating udev eve[ 32.112846] ata1.01: configured for UDMA/100
nts for MD array[ 32.167479] ata1: EH complete
s...done.
Activ[ 32.220544] sba_alloc_range: I/O MMU @ c0000000fed01000 isout
of mapping resources, 8192 5 ffff
ating swap...don[ 32.340789] ata1.01: exception Emask 0x0 SAct 0x0
SErr 0x0 action 0x0
e.
Checking roo[ 32.434553] ata1.01: failed command: READ DMA
t file system...[ 32.503490] ata1.01: cmd
c8/00:80:c6:1e:90/00:00:00:00:00/f0 tag 0 dma 65536 in
[ 32.503493] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask
0x40 (internal error)
fsck from util-l[ 32.704899] ata1.01: status: { DRDY }
inux-ng 2.17.2
[ 32.788844] ata1.00: configured for UDMA/100
[ 32.852830] ata1.01: configured for UDMA/100
[ 32.904064] ata1: EH complete
[ 32.940555] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of
mapping resources, 8192 5 ffff
[ 33.045067] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 33.122372] ata1.01: failed command: READ DMA
[ 33.174651] ata1.01: cmd c8/00:80:c6:1e:90/00:00:00:00:00/f0 tag 0
dma 65536 in
[ 33.174655] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask
0x40 (internal error)
[ 33.359394] ata1.01: status: { DRDY }
[ 33.444859] ata1.00: configured for UDMA/100
[ 33.508848] ata1.01: configured for UDMA/100
[ 33.560050] ata1: EH complete
[ 33.596550] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of
mapping resources, 8192 5 ffff
[ 33.701069] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 33.778356] ata1.01: failed command: READ DMA
[ 33.830637] ata1.01: cmd c8/00:80:c6:1e:90/00:00:00:00:00/f0 tag 0
dma 65536 in
[ 33.830640] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask
0x40 (internal error)
[ 34.015349] ata1.01: status: { DRDY }
[ 34.080851] ata1.00: configured for UDMA/100
[ 34.144835] ata1.01: configured for UDMA/100
[ 34.196024] ata1: EH complete
[ 34.232518] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of
mapping resources, 8192 5 ffff
[ 34.337030] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 34.414339] ata1.01: failed command: READ DMA
[ 34.466612] ata1.01: cmd c8/00:80:c6:1e:90/00:00:00:00:00/f0 tag 0
dma 65536 in
[ 34.466616] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask
0x40 (internal error)
[ 34.651352] ata1.01: status: { DRDY }
[ 34.716847] ata1.00: configured for UDMA/100
[ 34.780848] ata1.01: configured for UDMA/100
[ 34.832105] sd 0:0:1:0: [sdb] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE
[ 34.918842] sd 0:0:1:0: [sdb] Sense Key : Aborted Command
[current] [descriptor]
[ 35.009020] Descriptor sense data with sense descriptors (in hex):
[ 35.083282] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 35.161192] 0e 4f f7 7f
[ 35.200364] sd 0:0:1:0: [sdb] Add. Sense: No additional sense information
[ 35.282953] sd 0:0:1:0: [sdb] CDB: Read(10): 28 00 00 90 1e c6 00 00 80 00
[ 35.366695] end_request: I/O error, dev sdb, sector 9445062
[ 35.433502] md/raid1:md1: sdb3: rescheduling sector 7296624
[ 35.500376] md/raid1:md1: sdb3: rescheduling sector 7296632
[ 35.567239] md/raid1:md1: sdb3: rescheduling sector 7296728
[ 35.634100] md/raid1:md1: sdb3: rescheduling sector 7296736
[ 35.700975] md/raid1:md1: sdb3: rescheduling sector 7296744
[ 35.767869] ata1: EH complete
[ 35.803645] md/raid1:md1: Disk failure on sdb3, disabling device.
[ 35.803648] <1>md/raid1:md1: Operation continuing on 1 devices.
[ 35.950662] md/raid1:md1: redirecting sector 7296624 to other mirror: sda3
[ 36.033557] md/raid1:md1: redirecting sector 7296632 to other mirror: sda3
[ 36.116558] md/raid1:md1: redirecting sector 7296728 to other mirror: sda3
[ 36.199604] md/raid1:md1: redirecting sector 7296736 to other mirror: sda3
[ 36.282323] md/raid1:md1: redirecting sector 7296744 to other mirror: sda3
/dev/md1: clean,[ 36.449461] EXT3-fs (md1): 48076/305216 fiusing
internal journalles, 410845/1220
672 blocks
done.
Cleaning up ifupdown....
[ 36.663286] loop: module loaded
Setting up networking....
Loading kernel modules...done.
Activating lvm and md swap...done.
Checking file systems...fsck from util-linux-ng 2.17.2
/dev/md3: clean, 4152/612000 files, 1308037/2441376 blocks
/sbin/fsck.xfs: XFS file system.
Reiserfs super block in block 16 on 0x902 of format 3.6 with standard journal
Blocks (total/free): 2441376/2037962 by 4096 bytes
Filesystem is clean
done.
Mounting local filesystems...[ 38.083455] EXT3-fs: barriers not enabled
[ 38.142533] kjournald starting. Commit interval 5 seconds
[ 38.226936] EXT3-fs (md3): using internal journal
[ 38.283506] EXT3-fs (md3): mounted filesystem with ordered data mode
[ 38.743865] SGI XFS with ACLs, security attributes, realtime, large
block/inode numbers, no debug enabled
[ 38.862619] SGI XFS Quota Management subsystem
[ 39.002463] XFS mounting filesystem md4
[ 39.378603] REISERFS (device md2): found reiserfs format "3.6" with
standard journal
[ 39.471549] REISERFS (device md2): using ordered data mode
[ 39.548943] REISERFS (device md2): journal params: device md2, size
8192, journal first block 18, max trans len 1024, max batch 900, max
commit age 30, max trans age 30
[ 39.730198] REISERFS (device md2): checking transaction log (md2)
[ 39.886982] REISERFS (device md2): Using r5 hash to sort names
done.
Activating swapfile swap...done.
Cleaning up temporary files....
Configuring network interfaces...done.
Cleaning up temporary files....
Setting console screen modes and fonts.
cannot (un)set powersave mode
[9;30] [14;30]Setting kernel variables ...error:
"net.ipv6.bindv6only" is an unknown key
failed.
Recovering schroot sessions:[ 42.412633] e1000: eth0 NIC Link is Up
1000 Mbps Full Duplex, Flow Control: RX
.
INIT: Entering runlevel: 2
Using makefile-style concurrent boot in runlevel 2.
Starting uptime daemon: uptimed.
Starting enhanced syslogd: rsyslogd.
Starting BOINC core client: boinc.
Setting up scheduling for BOINC core client and children: idle, idleprio.
Starting ACPI services....
[ 44.227566] NET: Registered protocol family 10
[ 44.282807] lo: Disabled Privacy Extensions
Starting web server: apache2 htcacheclean.
Starting deferred execution scheduler: atd.
Starting conserver: conserver.
Starting MySQL database server: mysqld[ 49.073649] sba_alloc_range:
I/O MMU @ c0000000fed01000 isout of mapping resources, 8192 5 ffff
[ 49.178222] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 49.255536] ata1.00: failed command: READ DMA
[ 49.307807] ata1.00: cmd c8/00:80:41:65:6d/00:00:00:00:00/e0 tag 0
dma 65536 in
[ 49.307811] res 50/00:00:90:64:6d/00:00:00:00:00/e0 Emask
0x40 (internal error)
[ 49.492545] ata1.00: status: { DRDY }
[ 49.548888] ata1.00: configured for UDMA/100
[ 49.612883] ata1.01: configured for UDMA/100
[ 49.664141] ata1: EH complete
[ 49.700579] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of
mapping resources, 8192 5 ffff
[ 49.805455] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 49.882763] ata1.00: failed command: READ DMA
[ 49.935043] ata1.00: cmd c8/00:80:41:65:6d/00:00:00:00:00/e0 tag 0
dma 65536 in
[ 49.935046] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask
0x40 (internal error)
[ 50.119757] ata1.00: status: { DRDY }
[ 50.176884] ata1.00: configured for UDMA/100
[ 50.240885] ata1.01: configured for UDMA/100
[ 50.292186] ata1: EH complete
[ 50.328652] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of
mapping resources, 8192 5 ffff
[ 50.433519] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 50.510828] ata1.00: failed command: READ DMA
[ 50.563109] ata1.00: cmd c8/00:80:41:65:6d/00:00:00:00:00/e0 tag 0
dma 65536 in
[ 50.563112] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask
0x40 (internal error)
[ 50.747838] ata1.00: status: { DRDY }
[ 50.812884] ata1.00: configured for UDMA/100
[ 50.876898] ata1.01: configured for UDMA/100
[ 50.928075] ata1: EH complete
[ 50.964509] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of
mapping resources, 8192 5 ffff
[ 51.069362] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 51.146597] ata1.00: failed command: READ DMA
[ 51.198878] ata1.00: cmd c8/00:80:41:65:6d/00:00:00:00:00/e0 tag 0
dma 65536 in
[ 51.198881] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask
0x40 (internal error)
[ 51.383631] ata1.00: status: { DRDY }
[ 51.448888] ata1.00: configured for UDMA/100
[ 51.512883] ata1.01: configured for UDMA/100
[ 51.564055] ata1: EH complete
[ 51.600487] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of
mapping resources, 8192 5 ffff
[ 51.705376] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 51.782582] ata1.00: failed command: READ DMA
[ 51.834866] ata1.00: cmd c8/00:80:41:65:6d/00:00:00:00:00/e0 tag 0
dma 65536 in
[ 51.834870] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask
0x40 (internal error)
[ 52.019615] ata1.00: status: { DRDY }
[ 52.084895] ata1.00: configured for UDMA/100
[ 52.148895] ata1.01: configured for UDMA/100
[ 52.200143] ata1: EH complete
[ 52.236577] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of
mapping resources, 8192 5 ffff
[ 52.341522] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 52.418767] ata1.00: failed command: READ DMA
[ 52.471052] ata1.00: cmd c8/00:80:41:65:6d/00:00:00:00:00/e0 tag 0
dma 65536 in
[ 52.471055] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask
0x40 (internal error)
[ 52.655780] ata1.00: status: { DRDY }
[ 52.720890] ata1.00: configured for UDMA/100
[ 52.784892] ata1.01: configured for UDMA/100
[ 52.836328] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE
[ 52.923185] sd 0:0:0:0: [sda] Sense Key : Aborted Command
[current] [descriptor]
[ 53.013350] Descriptor sense data with sense descriptors (in hex):
[ 53.087616] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 53.165523] 0e 4f f7 7f
[ 53.204693] sd 0:0:0:0: [sda] Add. Sense: No additional sense information
[ 53.287283] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 6d 65 41 00 00 80 00
[ 53.371027] end_request: I/O error, dev sda, sector 7169345
[ 53.437833] Buffer I/O error on device md1, logical block 627609
[ 53.509918] Buffer I/O error on device md1, logical block 627610
[ 53.581987] Buffer I/O error on device md1, logical block 627623
[ 53.654070] Buffer I/O error on device md1, logical block 627624
[ 53.726157] ata1: EH complete
.Starting Name Service Cache Daemon: nscd.
Starting NTP server: ntpd.
.
Checking for corrupt, not cleanly closed and upgrade needing tables..
Starting periodic command scheduler: cron.
Starting ftp server: proftpd.
Starting Postfix Mail Transport Agent: postfix.
Starting rsync daemon: rsync.
Starting S.M.A.R.T. daemon: smartd failed!
Starting network management services: snmpd.
Starting OpenBSD Secure Shell server: sshd[ 64.528649] sshd (1553):
/proc/1553/oom_adj is deprecated, please use /proc/1553/oom_score_adj
instead.
.
startpar: service(s) returned failure: smartmontools ... failed!
Running scripts in rc2.d/ took 23
Debian GNU/Linux squeeze/sid bugsbunny ttyS0
bugsbunny login: [ 80.408152] sba_alloc_range: I/O MMU @
c0000000fed01000 isout of mapping resources, 8192 5 ffff
[ 80.512865] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 80.590229] ata1.00: failed command: WRITE DMA
[ 80.643494] ata1.00: cmd ca/00:78:31:2f:99/00:00:00:00:00/e0 tag 0
dma 61440 out
[ 80.643497] res 50/00:00:30:2f:99/00:00:00:00:00/e0 Emask
0x40 (internal error)
[ 80.829467] ata1.00: status: { DRDY }
[ 80.884790] ata1.00: configured for UDMA/100
[ 80.948782] ata1.01: configured for UDMA/100
[ 81.000032] ata1: EH complete
[ 81.036476] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of
mapping resources, 8192 5 ffff
[ 81.141817] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 81.219068] ata1.00: failed command: WRITE DMA
[ 81.272391] ata1.00: cmd ca/00:78:31:2f:99/00:00:00:00:00/e0 tag 0
dma 61440 out
[ 81.272394] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask
0x40 (internal error)
[ 81.458149] ata1.00: status: { DRDY }
[ 81.524760] ata1.00: configured for UDMA/100
[ 81.588781] ata1.01: configured for UDMA/100
[ 81.639965] ata1: EH complete
[ 81.676401] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of
mapping resources, 8192 5 ffff
[ 81.781426] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 81.858688] ata1.00: failed command: WRITE DMA
[ 81.912021] ata1.00: cmd ca/00:78:31:2f:99/00:00:00:00:00/e0 tag 0
dma 61440 out
[ 81.912024] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask
0x40 (internal error)
[ 82.097774] ata1.00: status: { DRDY }
[ 82.164761] ata1.00: configured for UDMA/100
[ 82.228760] ata1.01: configured for UDMA/100
[ 82.280010] ata1: EH complete
[ 82.316508] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of
mapping resources, 8192 5 ffff
[ 82.421410] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 82.498625] ata1.00: failed command: WRITE DMA
[ 82.551943] ata1.00: cmd ca/00:78:31:2f:99/00:00:00:00:00/e0 tag 0
dma 61440 out
[ 82.551947] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask
0x40 (internal error)
[ 82.737720] ata1.00: status: { DRDY }
[ 82.804775] ata1.00: configured for UDMA/100
[ 82.868749] ata1.01: configured for UDMA/100
[ 82.919963] ata1: EH complete
[ 82.956366] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of
mapping resources, 8192 5 ffff
[ 83.061192] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 83.138448] ata1.00: failed command: WRITE DMA
[ 83.191792] ata1.00: cmd ca/00:78:31:2f:99/00:00:00:00:00/e0 tag 0
dma 61440 out
[ 83.191796] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask
0x40 (internal error)
[ 83.377563] ata1.00: status: { DRDY }
[ 83.440762] ata1.00: configured for UDMA/100
[ 83.504756] ata1.01: configured for UDMA/100
[ 83.556016] ata1: EH complete
[ 83.592461] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of
mapping resources, 8192 5 ffff
[ 83.697291] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 83.774536] ata1.00: failed command: WRITE DMA
[ 83.827856] ata1.00: cmd ca/00:78:31:2f:99/00:00:00:00:00/e0 tag 0
dma 61440 out
[ 83.827860] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask
0x40 (internal error)
[ 84.013687] ata1.00: status: { DRDY }
[ 84.080754] ata1.00: configured for UDMA/100
[ 84.144755] ata1.01: configured for UDMA/100
[ 84.195965] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE
[ 84.282692] sd 0:0:0:0: [sda] Sense Key : Aborted Command
[current] [descriptor]
[ 84.372963] Descriptor sense data with sense descriptors (in hex):
[ 84.447219] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 84.525133] 0e 4f f7 7f
[ 84.564306] sd 0:0:0:0: [sda] Add. Sense: No additional sense information
[ 84.646999] sd 0:0:0:0: [sda] CDB: Write(10): 2a 00 00 99 2f 31 00 00 78 00
[ 84.731781] end_request: I/O error, dev sda, sector 10039089
[ 84.799639] Buffer I/O error on device md1, logical block 986327
[ 84.871906] lost page write due to I/O error on md1
[ 84.930460] Buffer I/O error on device md1, logical block 986328
[ 85.002525] lost page write due to I/O error on md1
[ 85.061056] Buffer I/O error on device md1, logical block 986329
[ 85.133137] lost page write due to I/O error on md1
[ 85.191661] Buffer I/O error on device md1, logical block 986330
[ 85.263764] lost page write due to I/O error on md1
[ 85.322278] Buffer I/O error on device md1, logical block 986331
[ 85.394348] lost page write due to I/O error on md1
[ 85.452888] Buffer I/O error on device md1, logical block 986332
[ 85.524970] lost page write due to I/O error on md1
[ 85.583495] Buffer I/O error on device md1, logical block 986333
[ 85.655582] lost page write due to I/O error on md1
[ 85.714117] Buffer I/O error on device md1, logical block 986334
[ 85.786192] lost page write due to I/O error on md1
[ 85.844723] Buffer I/O error on device md1, logical block 986335
[ 85.916804] lost page write due to I/O error on md1
[ 85.975331] Buffer I/O error on device md1, logical block 986336
[ 86.047418] lost page write due to I/O error on md1
[ 86.105981] ata1: EH complete
[ 86.145182] JBD: Detected IO errors while flushing file data on md1
ERROR 1194 (HY000) at line 1: Table '/tmp/#sql_50c_0' is marked as
crashed and should be repaired
[ 101.179136] sba_alloc_range: I/O MMU @
c0000000fed01000 isout of mapping resources, 8192 5 ffff
[ 101.283633] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 101.360875] ata1.01: failed command: WRITE DMA
[ 101.414171] ata1.01: cmd ca/00:80:1b:91:d5/00:00:00:00:00/fa tag 0
dma 65536 out
[ 101.414174] res 50/00:00:3f:91:d5/00:00:00:00:00/ea Emask
0x40 (internal error)
[ 101.599956] ata1.01: status: { DRDY }
[ 101.656661] ata1.00: configured for UDMA/100
[ 101.720655] ata1.01: configured for UDMA/100
[ 101.771865] ata1: EH complete
[ 101.808407] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of
mapping resources, 8192 5 ffff
[ 101.913342] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 101.990577] ata1.01: failed command: WRITE DMA
[ 102.043903] ata1.01: cmd ca/00:80:1b:91:d5/00:00:00:00:00/fa tag 0
dma 65536 out
[ 102.043906] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask
0x40 (internal error)
[ 102.229714] ata1.01: status: { DRDY }
[ 102.296659] ata1.00: configured for UDMA/100
[ 102.352663] ata1.01: configured for UDMA/100
[ 102.403864] ata1: EH complete
[ 102.440376] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of
mapping resources, 8192 5 ffff
[ 102.545220] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 102.622505] ata1.01: failed command: WRITE DMA
[ 102.675833] ata1.01: cmd ca/00:80:1b:91:d5/00:00:00:00:00/fa tag 0
dma 65536 out
[ 102.675837] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask
0x40 (internal error)
[ 102.861788] ata1.01: status: { DRDY }
[ 102.928656] ata1.00: configured for UDMA/100
[ 102.992660] ata1.01: configured for UDMA/100
[ 103.043912] ata1: EH complete
[ 103.080431] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of
mapping resources, 8192 5 ffff
[ 103.185264] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 103.262531] ata1.01: failed command: WRITE DMA
[ 103.315904] ata1.01: cmd ca/00:80:1b:91:d5/00:00:00:00:00/fa tag 0
dma 65536 out
[ 103.315908] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask
0x40 (internal error)
[ 103.501642] ata1.01: status: { DRDY }
[ 103.568645] ata1.00: configured for UDMA/100
[ 103.632662] ata1.01: configured for UDMA/100
[ 103.683836] ata1: EH complete
[ 103.720349] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of
mapping resources, 8192 5 ffff
[ 103.825128] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 103.902400] ata1.01: failed command: WRITE DMA
[ 103.955702] ata1.01: cmd ca/00:80:1b:91:d5/00:00:00:00:00/fa tag 0
dma 65536 out
[ 103.955706] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask
0x40 (internal error)
[ 104.141467] ata1.01: status: { DRDY }
[ 104.208663] ata1.00: configured for UDMA/100
[ 104.272658] ata1.01: configured for UDMA/100
[ 104.323948] ata1: EH complete
[ 104.360465] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of
mapping resources, 8192 5 ffff
[ 104.465304] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 104.542503] ata1.01: failed command: WRITE DMA
[ 104.595821] ata1.01: cmd ca/00:80:1b:91:d5/00:00:00:00:00/fa tag 0
dma 65536 out
[ 104.595824] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask
0x40 (internal error)
[ 104.781589] ata1.01: status: { DRDY }
[ 104.848643] ata1.00: configured for UDMA/100
[ 104.912637] ata1.01: configured for UDMA/100
[ 104.963817] sd 0:0:1:0: [sdb] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE
[ 105.050551] sd 0:0:1:0: [sdb] Sense Key : Aborted Command
[current] [descriptor]
[ 105.140722] Descriptor sense data with sense descriptors (in hex):
[ 105.214984] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 105.292893] 0e 4f f7 7f
[ 105.332067] sd 0:0:1:0: [sdb] Add. Sense: No additional sense information
[ 105.414654] sd 0:0:1:0: [sdb] CDB: Write(10): 2a 00 0a d5 91 1b 00 00 80 00
[ 105.499436] end_request: I/O error, dev sdb, sector 181768475
[ 105.568329] md/raid1:md4: Disk failure on sdb6, disabling device.
[ 105.568332] <1>md/raid1:md4: Operation continuing on 1 devices.
[ 105.712441] ata1: EH complete
[ 105.751970] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of
mapping resources, 8192 5 ffff
[ 105.857630] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 105.934867] ata1.00: failed command: WRITE DMA
[ 105.988178] ata1.00: cmd ca/00:80:40:91:d5/00:00:00:00:00/ea tag 0
dma 65536 out
[ 105.988182] res 50/00:00:ea:6c:c3/00:00:00:00:00/f3 Emask
0x40 (internal error)
[ 106.173959] ata1.00: status: { DRDY }
[ 106.240637] ata1.00: configured for UDMA/100
[ 106.296652] ata1.01: configured for UDMA/100
[ 106.347909] ata1: EH complete
[ 106.384281] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of
mapping resources, 8192 5 ffff
[ 106.489182] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 106.566457] ata1.00: failed command: WRITE DMA
[ 106.619802] ata1.00: cmd ca/00:80:40:91:d5/00:00:00:00:00/ea tag 0
dma 65536 out
[ 106.619805] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask
0x40 (internal error)
[ 106.805590] ata1.00: status: { DRDY }
[ 106.872638] ata1.00: configured for UDMA/100
[ 106.928637] ata1.01: configured for UDMA/100
[ 106.979862] ata1: EH complete
[ 107.016302] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of
mapping resources, 8192 5 ffff
[ 107.121136] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 107.198374] ata1.00: failed command: WRITE DMA
[ 107.251695] ata1.00: cmd ca/00:80:40:91:d5/00:00:00:00:00/ea tag 0
dma 65536 out
[ 107.251698] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask
0x40 (internal error)
[ 107.437494] ata1.00: status: { DRDY }
[ 107.504622] ata1.00: configured for UDMA/100
[ 107.568635] ata1.01: configured for UDMA/100
[ 107.619888] ata1: EH complete
[ 107.656326] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of
mapping resources, 8192 5 ffff
[ 107.761164] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 107.838423] ata1.00: failed command: WRITE DMA
[ 107.891788] ata1.00: cmd ca/00:80:40:91:d5/00:00:00:00:00/ea tag 0
dma 65536 out
[ 107.891791] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask
0x40 (internal error)
[ 108.077522] ata1.00: status: { DRDY }
[ 108.144624] ata1.00: configured for UDMA/100
[ 108.200626] ata1.01: configured for UDMA/100
[ 108.251814] ata1: EH complete
[ 108.288252] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of
mapping resources, 8192 5 ffff
[ 108.393305] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 108.470537] ata1.00: failed command: WRITE DMA
[ 108.523858] ata1.00: cmd ca/00:80:40:91:d5/00:00:00:00:00/ea tag 0
dma 65536 out
[ 108.523861] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask
0x40 (internal error)
[ 108.709617] ata1.00: status: { DRDY }
[ 108.776614] ata1.00: configured for UDMA/100
[ 108.840621] ata1.01: configured for UDMA/100
[ 108.891868] ata1: EH complete
[ 108.928278] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of
mapping resources, 8192 5 ffff
[ 109.034185] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 109.111421] ata1.00: failed command: WRITE DMA
[ 109.164752] ata1.00: cmd ca/00:80:40:91:d5/00:00:00:00:00/ea tag 0
dma 65536 out
[ 109.164756] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask
0x40 (internal error)
[ 109.350526] ata1.00: status: { DRDY }
[ 109.416623] ata1.00: configured for UDMA/100
[ 109.480618] ata1.01: configured for UDMA/100
[ 109.531901] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE
[ 109.618627] sd 0:0:0:0: [sda] Sense Key : Aborted Command
[current] [descriptor]
[ 109.708794] Descriptor sense data with sense descriptors (in hex):
[ 109.783060] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 109.860965] 0e 4f f7 7f
[ 109.900135] sd 0:0:0:0: [sda] Add. Sense: No additional sense information
[ 109.982727] sd 0:0:0:0: [sda] CDB: Write(10): 2a 00 0a d5 91 40 00 00 80 00
[ 110.067509] end_request: I/O error, dev sda, sector 181768512
[ 110.136439] ata1: EH complete
[ 110.172169] quiet_error: 5 callbacks suppressed
[ 110.226586] Buffer I/O error on device md4, logical block 16348896
[ 110.300998] lost page write due to I/O error on md4
[ 110.359597] Buffer I/O error on device md4, logical block 16348897
[ 110.433963] lost page write due to I/O error on md4
[ 110.492581] Buffer I/O error on device md4, logical block 16348898
[ 110.566857] lost page write due to I/O error on md4
[ 110.625470] Buffer I/O error on device md4, logical block 16348899
[ 110.699640] lost page write due to I/O error on md4
[ 110.758195] Buffer I/O error on device md4, logical block 16348900
[ 110.832762] lost page write due to I/O error on md4
[ 110.891418] Buffer I/O error on device md4, logical block 16348901
[ 110.965782] lost page write due to I/O error on md4
[ 111.024558] Buffer I/O error on device md4, logical block 16348902
[ 111.098881] lost page write due to I/O error on md4
[ 111.157527] Buffer I/O error on device md4, logical block 16348903
[ 111.231785] lost page write due to I/O error on md4
[ 111.290534] Buffer I/O error on device md4, logical block 16348904
[ 111.364914] lost page write due to I/O error on md4
[ 111.423643] Buffer I/O error on device md4, logical block 16348905
[ 111.497903] lost page write due to I/O error on md4
[ 142.878768] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of
mapping resources, 8192 5 ffff
[ 142.987192] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 143.064496] ata1.01: failed command: WRITE DMA
[ 143.117799] ata1.01: cmd ca/00:78:07:3b:b6/00:00:00:00:00/f0 tag 0
dma 61440 out
[ 143.117803] res 50/00:00:a0:03:88/00:00:00:00:00/e0 Emask
0x40 (internal error)
[ 143.303584] ata1.01: status: { DRDY }
[ 143.372435] ata1.00: configured for UDMA/100
[ 143.436423] ata1.01: configured for UDMA/100
[ 143.487666] ata1: EH complete
[ 143.524175] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of
mapping resources, 8192 5 ffff
[ 143.629019] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 143.706345] ata1.01: failed command: WRITE DMA
[ 143.759601] ata1.01: cmd ca/00:78:07:3b:b6/00:00:00:00:00/f0 tag 0
dma 61440 out
[ 143.759604] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask
0x40 (internal error)
[ 143.945412] ata1.01: status: { DRDY }
[ 144.012444] ata1.00: configured for UDMA/100
[ 144.076422] ata1.01: configured for UDMA/100
[ 144.127599] ata1: EH complete
[ 144.164124] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of
mapping resources, 8192 5 ffff
[ 144.268902] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 144.346282] ata1.01: failed command: WRITE DMA
[ 144.399558] ata1.01: cmd ca/00:78:07:3b:b6/00:00:00:00:00/f0 tag 0
dma 61440 out
[ 144.399562] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask
0x40 (internal error)
[ 144.585325] ata1.01: status: { DRDY }
[ 144.652428] ata1.00: configured for UDMA/100
[ 144.716418] ata1.01: configured for UDMA/100
[ 144.767640] ata1: EH complete
[ 144.804154] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of
mapping resources, 8192 5 ffff
[ 144.909388] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 144.986676] ata1.01: failed command: WRITE DMA
[ 145.040006] ata1.01: cmd ca/00:78:07:3b:b6/00:00:00:00:00/f0 tag 0
dma 61440 out
[ 145.040009] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask
0x40 (internal error)
[ 145.225762] ata1.01: status: { DRDY }
[ 145.288413] ata1.00: configured for UDMA/100
[ 145.344425] ata1.01: configured for UDMA/100
[ 145.395698] ata1: EH complete
[ 145.432284] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of
mapping resources, 8192 5 ffff
[ 145.537176] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 145.614428] ata1.01: failed command: WRITE DMA
[ 145.667757] ata1.01: cmd ca/00:78:07:3b:b6/00:00:00:00:00/f0 tag 0
dma 61440 out
[ 145.667761] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask
0x40 (internal error)
[ 145.853526] ata1.01: status: { DRDY }
[ 145.920413] ata1.00: configured for UDMA/100
[ 145.984419] ata1.01: configured for UDMA/100
[ 146.035629] ata1: EH complete
[ 146.072132] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of
mapping resources, 8192 5 ffff
[ 146.176909] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 146.254152] ata1.01: failed command: WRITE DMA
[ 146.307473] ata1.01: cmd ca/00:78:07:3b:b6/00:00:00:00:00/f0 tag 0
dma 61440 out
[ 146.307476] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask
0x40 (internal error)
[ 146.493277] ata1.01: status: { DRDY }
[ 146.560404] ata1.00: configured for UDMA/100
[ 146.624418] ata1.01: configured for UDMA/100
[ 146.675680] sd 0:0:1:0: [sdb] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE
[ 146.762405] sd 0:0:1:0: [sdb] Sense Key : Aborted Command
[current] [descriptor]
[ 146.852888] Descriptor sense data with sense descriptors (in hex):
[ 146.927149] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 147.005057] 0e 4f f7 7f
[ 147.044230] sd 0:0:1:0: [sdb] Add. Sense: No additional sense information
[ 147.126820] sd 0:0:1:0: [sdb] CDB: Write(10): 2a 00 00 b6 3b 07 00 00 78 00
[ 147.211601] end_request: I/O error, dev sdb, sector 11942663
[ 147.279455] md/raid1:md2: Disk failure on sdb4, disabling device.
[ 147.279458] <1>md/raid1:md2: Operation continuing on 1 devices.
[ 147.423595] ata1: EH complete
[ 147.460291] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of
mapping resources, 8192 5 ffff
[ 147.568758] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 147.645988] ata1.00: failed command: WRITE DMA
[ 147.699308] ata1.00: cmd ca/00:78:2a:3b:b6/00:00:00:00:00/e0 tag 0
dma 61440 out
[ 147.699312] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask
0x40 (internal error)
[ 147.885136] ata1.00: status: { DRDY }
[ 147.952400] ata1.00: configured for UDMA/100
[ 148.016401] ata1.01: configured for UDMA/100
[ 148.067604] ata1: EH complete
[ 148.104054] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of
mapping resources, 8192 5 ffff
[ 148.209063] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 148.286339] ata1.00: failed command: WRITE DMA
[ 148.339690] ata1.00: cmd ca/00:78:2a:3b:b6/00:00:00:00:00/e0 tag 0
dma 61440 out
[ 148.339694] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask
0x40 (internal error)
[ 148.525443] ata1.00: status: { DRDY }
[ 148.596421] ata1.00: configured for UDMA/100
[ 148.652404] ata1.01: configured for UDMA/100
[ 148.703592] ata1: EH complete
[ 148.740033] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of
mapping resources, 8192 5 ffff
[ 148.845329] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 148.922648] ata1.00: failed command: WRITE DMA
[ 148.975946] ata1.00: cmd ca/00:78:2a:3b:b6/00:00:00:00:00/e0 tag 0
dma 61440 out
[ 148.975949] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask
0x40 (internal error)
[ 149.161698] ata1.00: status: { DRDY }
[ 149.228408] ata1.00: configured for UDMA/100
[ 149.292397] ata1.01: configured for UDMA/100
[ 149.343620] ata1: EH complete
[ 149.380050] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of
mapping resources, 8192 5 ffff
[ 149.485049] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 149.562346] ata1.00: failed command: WRITE DMA
[ 149.615691] ata1.00: cmd ca/00:78:2a:3b:b6/00:00:00:00:00/e0 tag 0
dma 61440 out
[ 149.615695] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask
0x40 (internal error)
[ 149.801450] ata1.00: status: { DRDY }
[ 149.868396] ata1.00: configured for UDMA/100
[ 149.932399] ata1.01: configured for UDMA/100
[ 149.983667] ata1: EH complete
[ 150.020110] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of
mapping resources, 8192 5 ffff
[ 150.125090] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 150.202384] ata1.00: failed command: WRITE DMA
[ 150.255704] ata1.00: cmd ca/00:78:2a:3b:b6/00:00:00:00:00/e0 tag 0
dma 61440 out
[ 150.255707] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask
0x40 (internal error)
[ 150.441540] ata1.00: status: { DRDY }
[ 150.508388] ata1.00: configured for UDMA/100
[ 150.572398] ata1.01: configured for UDMA/100
[ 150.623587] ata1: EH complete
[ 150.660023] sba_alloc_range: I/O MMU @ c0000000fed01000 isout of
mapping resources, 8192 5 ffff
[ 150.764972] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 150.842408] ata1.00: failed command: WRITE DMA
[ 150.895804] ata1.00: cmd ca/00:78:2a:3b:b6/00:00:00:00:00/e0 tag 0
dma 61440 out
[ 150.895807] res 50/00:00:7f:f7:4f/00:00:00:00:00/fe Emask
0x40 (internal error)
[ 151.081516] ata1.00: status: { DRDY }
[ 151.148383] ata1.00: configured for UDMA/100
[ 151.212401] ata1.01: configured for UDMA/100
[ 151.263649] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE
[ 151.350433] sd 0:0:0:0: [sda] Sense Key : Aborted Command
[current] [descriptor]
[ 151.440644] Descriptor sense data with sense descriptors (in hex):
[ 151.514906] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 151.592816] 0e 4f f7 7f
[ 151.631985] sd 0:0:0:0: [sda] Add. Sense: No additional sense information
[ 151.714573] sd 0:0:0:0: [sda] CDB: Write(10): 2a 00 00 b6 3b 2a 00 00 78 00
[ 151.799358] end_request: I/O error, dev sda, sector 11942698
[ 151.867216] quiet_error: 99 callbacks suppressed
[ 151.922627] Buffer I/O error on device md2, logical block 3575
[ 151.992613] lost page write due to I/O error on md2
[ 152.051145] Buffer I/O error on device md2, logical block 3576
[ 152.121147] lost page write due to I/O error on md2
[ 152.179695] Buffer I/O error on device md2, logical block 3577
[ 152.249666] lost page write due to I/O error on md2
[ 152.308195] Buffer I/O error on device md2, logical block 3578
[ 152.378208] lost page write due to I/O error on md2
[ 152.436723] Buffer I/O error on device md2, logical block 3579
[ 152.506722] lost page write due to I/O error on md2
[ 152.565257] Buffer I/O error on device md2, logical block 3580
[ 152.635257] lost page write due to I/O error on md2
[ 152.693784] Buffer I/O error on device md2, logical block 3581
[ 152.763774] lost page write due to I/O error on md2
[ 152.822499] Buffer I/O error on device md2, logical block 3582
[ 152.892433] lost page write due to I/O error on md2
[ 152.950945] Buffer I/O error on device md2, logical block 3583
[ 153.020944] lost page write due to I/O error on md2
[ 153.079470] Buffer I/O error on device md2, logical block 3584
[ 153.149469] lost page write due to I/O error on md2
[ 153.208035] ata1: EH complete
[ 153.244522] REISERFS abort (device md2): Journal write error in
flush_commit_list
[ 153.338258] REISERFS warning (device md2): clm-6006
reiserfs_dirty_inode: writing inode 14364 on readonly FS
--
Thibaut VARENE
http://www.parisc-linux.org/~varenet/
Reply to: