Bug#601184: linux-image-2.6.36-rc6-amd64: Possible privilege escalation bug
Package: linux-2.6
Version: 2.6.36~rc6-1~experimental.1
Severity: critical
Tags: security
Justification: root security hole
I'm not sure if I should include the steps to reproduxe here in case it's visible to the
general population.
Could someone email me directly so I can provide the details.
If they decide to, then they can post the details themselves.
-- Package-specific info:
** Version:
Linux version 2.6.36-rc6-amd64 (Debian 2.6.36~rc6-1~experimental.1) (ben@decadent.org.uk) (gcc version 4.4.5 (Debian 4.4.4-17) ) #1 SMP Mon Oct 4 09:56:45 UTC 2010
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.36-rc6-amd64 root=/dev/mapper/VgCompaq-debian resume=/dev/VgCompaq/swap ro quiet splash vga=0x317
** Not tainted
** Kernel log:
[ 9.031499] PM: Marking nosave pages: 00000000bf534000 - 00000000bf537000
[ 9.031502] PM: Marking nosave pages: 00000000bf5bb000 - 00000000bf5bf000
[ 9.031504] PM: Basic memory bitmaps created
[ 9.045860] PM: Basic memory bitmaps freed
[ 10.112062] EXT3-fs: barriers not enabled
[ 10.126287] kjournald starting. Commit interval 5 seconds
[ 10.126311] EXT3-fs (dm-4): mounted filesystem with ordered data mode
[ 13.560017] udevd version 125 started
[ 14.438927] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 14.469288] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 14.682126] i801_smbus 0000:00:1f.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 14.749432] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 14.847434] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 14.847496] ACPI: Power Button [PWRB]
[ 14.847559] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[ 14.847631] ACPI: Lid Switch [LID0]
[ 14.847690] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
[ 14.847726] ACPI: Sleep Button [SLPB]
[ 14.847810] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 14.847844] ACPI: Power Button [PWRF]
[ 14.931635] ACPI: acpi_idle registered with cpuidle
[ 14.976035] Monitor-Mwait will be used to enter C-1 state
[ 15.010136] Monitor-Mwait will be used to enter C-2 state
[ 15.024658] Monitor-Mwait will be used to enter C-3 state
[ 15.024675] Marking TSC unstable due to TSC halts in idle
[ 15.042099] Linux video capture interface: v2.00
[ 15.056031] Switching to clocksource hpet
[ 15.213992] uvcvideo: Found UVC 1.00 device CNF7041 (04f2:b057)
[ 15.217763] input: CNF7041 as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input6
[ 15.217824] usbcore: registered new interface driver uvcvideo
[ 15.217826] USB Video Class driver (v0.1.0)
[ 15.536386] ACPI: WMI: Mapper loaded
[ 15.537107] cfg80211: Calling CRDA to update world regulatory domain
[ 15.628141] ACPI: AC Adapter [AC] (on-line)
[ 15.735247] ACPI: Battery Slot [BAT0] (battery present)
[ 16.034716] ath5k 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 16.034734] ath5k 0000:01:00.0: setting latency timer to 64
[ 16.034825] ath5k 0000:01:00.0: registered as 'phy0'
[ 17.064120] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input7
[ 17.094313] alloc irq_desc for 22 on node -1
[ 17.094317] alloc kstat_irqs on node -1
[ 17.094329] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 17.094423] alloc irq_desc for 41 on node -1
[ 17.094426] alloc kstat_irqs on node -1
[ 17.094440] HDA Intel 0000:00:1b.0: irq 41 for MSI/MSI-X
[ 17.094475] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 17.139024] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input8
[ 17.244803] input: HP WMI hotkeys as /devices/virtual/input/input9
[ 17.397742] ath: EEPROM regdomain: 0x67
[ 17.397745] ath: EEPROM indicates we should expect a direct regpair map
[ 17.397750] ath: Country alpha2 being used: 00
[ 17.397752] ath: Regpair used: 0x67
[ 17.485816] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[ 17.487452] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 17.487535] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 17.487606] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 17.737233] phy0: Selected rate control algorithm 'minstrel_ht'
[ 17.737908] Registered led device: ath5k-phy0::rx
[ 17.737933] Registered led device: ath5k-phy0::tx
[ 17.737943] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 19.753800] EXT3-fs (dm-4): using internal journal
[ 20.260893] loop: module loaded
[ 26.173764] fuse init (API version 7.15)
[ 26.495340] EXT3-fs: barriers not enabled
[ 26.505356] kjournald starting. Commit interval 5 seconds
[ 26.505522] EXT3-fs (sda1): using internal journal
[ 26.505527] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 26.571715] EXT3-fs: barriers not enabled
[ 26.588070] kjournald starting. Commit interval 5 seconds
[ 26.588402] EXT3-fs (dm-3): using internal journal
[ 26.588407] EXT3-fs (dm-3): mounted filesystem with ordered data mode
[ 26.752583] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 26.830884] ISO 9660 Extensions: RRIP_1991A
[ 26.872810] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null)
[ 26.980196] Adding 5857276k swap on /dev/mapper/VgCompaq-swap. Priority:-1 extents:1 across:5857276k
[ 34.590841] lp: driver loaded but no devices found
[ 34.755042] ppdev: user-space parallel port driver
[ 37.489030] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
[ 39.169819] eth1: link down
[ 39.170463] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 39.293525] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 48.027782] [drm] Initialized drm 1.1.0 20060810
[ 48.090103] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 48.090110] pci 0000:00:02.0: setting latency timer to 64
[ 48.144056] alloc irq_desc for 42 on node -1
[ 48.144060] alloc kstat_irqs on node -1
[ 48.144073] pci 0000:00:02.0: irq 42 for MSI/MSI-X
[ 48.144397] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[ 48.154380] acpi device:15: registered as cooling_device2
[ 48.154594] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14
[ 48.154657] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
[ 48.154685] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 92.955039] wlan0: deauthenticating from 00:14:d1:57:20:2d by local choice (reason=3)
[ 92.955219] wlan0: authenticate with 00:14:d1:57:20:2d (try 1)
[ 92.957367] wlan0: authenticated
[ 92.957403] wlan0: associate with 00:14:d1:57:20:2d (try 1)
[ 93.031237] wlan0: RX AssocResp from 00:14:d1:57:20:2d (capab=0x431 status=0 aid=1)
[ 93.031243] wlan0: associated
[ 93.033629] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 112.496067] wlan0: no IPv6 routers present
** Model information
sys_vendor: Hewlett-Packard
product_name: Compaq Presario A900 Notebook PC
product_version: F.34
chassis_vendor: Hewlett-Packard
chassis_version: N/A
bios_vendor: Hewlett-Packard
bios_version: F.34
board_vendor: Hewlett-Packard
board_name: 30ED
board_version: 83.21
** Loaded modules:
Module Size Used by
i915 272389 2
drm_kms_helper 21445 1 i915
drm 155393 4 i915,drm_kms_helper
i2c_algo_bit 4105 1 i915
ppdev 5491 0
parport_pc 18773 0
lp 8158 0
parport 25614 3 ppdev,parport_pc,lp
acpi_cpufreq 5335 0
mperf 1275 1 acpi_cpufreq
cpufreq_userspace 2048 0
cpufreq_conservative 7646 0
cpufreq_stats 2633 0
cpufreq_powersave 942 0
nls_utf8 1256 1
isofs 27991 1
fuse 54430 1
loop 12602 2
arc4 1330 2
ecb 1881 2
snd_hda_codec_conexant 29030 1
joydev 9096 0
hp_wmi 5365 0
snd_hda_intel 19642 8
snd_hda_codec 66997 2 snd_hda_codec_conexant,snd_hda_intel
snd_hwdep 5468 1 snd_hda_codec
snd_pcm_oss 31980 0
snd_mixer_oss 12719 1 snd_pcm_oss
snd_pcm 61725 5 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_midi 4454 0
snd_rawmidi 15929 1 snd_seq_midi
ath5k 122191 0
mac80211 162647 1 ath5k
snd_seq_midi_event 4754 1 snd_seq_midi
ath 8410 1 ath5k
battery 5566 0
video 18617 1 i915
output 1748 1 video
ac 2232 0
wmi 7209 1 hp_wmi
cfg80211 116967 3 ath5k,mac80211,ath
snd_seq 42486 2 snd_seq_midi,snd_seq_midi_event
rfkill 13886 2 hp_wmi,cfg80211
led_class 2187 1 ath5k
uvcvideo 51423 0
snd_timer 16288 4 snd_pcm,snd_seq
snd_seq_device 4531 3 snd_seq_midi,snd_rawmidi,snd_seq
psmouse 44949 0
videodev 53334 1 uvcvideo
v4l1_compat 11622 2 uvcvideo,videodev
processor 25923 3 acpi_cpufreq
tpm_tis 7045 0
v4l2_compat_ioctl32 9027 1 videodev
serio_raw 3742 0
tpm 9635 1 tpm_tis
button 4706 1 i915
tpm_bios 4661 1 tpm
evdev 7282 11
pcspkr 1739 0
snd 47020 23 snd_hda_codec_conexant,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
i2c_i801 7718 0
i2c_core 16394 6 i915,drm_kms_helper,drm,i2c_algo_bit,videodev,i2c_i801
shpchp 21955 0
soundcore 4598 1 snd
pci_hotplug 19711 1 shpchp
snd_page_alloc 6321 2 snd_hda_intel,snd_pcm
ext3 106582 3
jbd 36904 1 ext3
sha256_generic 9413 2
aes_x86_64 7396 3
aes_generic 26106 1 aes_x86_64
cbc 2611 1
dm_crypt 10543 1
dm_mirror 11802 0
dm_region_hash 6704 1 dm_mirror
dm_log 7677 2 dm_mirror,dm_region_hash
dm_snapshot 25150 0
dm_mod 57657 21 dm_crypt,dm_mirror,dm_log,dm_snapshot
usb_storage 39287 0
sg 19079 0
sr_mod 12887 0
sd_mod 27506 3
cdrom 29785 1 sr_mod
crc_t10dif 1300 1 sd_mod
ata_generic 2959 0
ata_piix 20748 0
ahci 19473 2
libahci 15971 1 ahci
uhci_hcd 18282 0
ehci_hcd 31102 0
libata 134106 4 ata_generic,ata_piix,ahci,libahci
8139cp 15568 0
8139too 17576 0
mii 3266 2 8139cp,8139too
scsi_mod 154372 5 usb_storage,sg,sr_mod,sd_mod,libata
usbcore 118328 5 uvcvideo,usb_storage,uhci_hcd,ehci_hcd
nls_base 6369 3 nls_utf8,isofs,usbcore
thermal 12014 0
fan 3258 0
thermal_sys 11764 4 video,processor,thermal,fan
ext4 263877 1
mbcache 5088 2 ext3,ext4
jbd2 57579 1 ext4
crc16 1327 1 ext4
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 03)
Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a02] (rev 03) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 42
Region 0: Memory at d1000000 (64-bit, non-prefetchable) [size=1M]
Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 30d0 [size=8]
Capabilities: <access denied>
Kernel modules: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a03] (rev 03)
Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at d1100000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 04)
Subsystem: Conexant Presario C700 [14f1:5051]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 41
Region 0: Memory at d2400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d1300000-d23fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d0ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 04) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 21
Region 4: I/O ports at 3080 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 04) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 20
Region 4: I/O ports at 3060 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 04) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 19
Region 4: I/O ports at 3040 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 04) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at d2404800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f4) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 00001000-00001fff
Memory behind bridge: d1200000-d12fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller [8086:2815] (rev 04)
Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt
00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 04) (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 30a0 [size=16]
Kernel driver in use: ata_piix
Kernel modules: ata_piix, ata_generic
00:1f.2 SATA controller [0106]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller [8086:2829] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 40
Region 0: I/O ports at 30b8 [size=8]
Region 1: I/O ports at 30dc [size=4]
Region 2: I/O ports at 30b0 [size=8]
Region 3: I/O ports at 30d8 [size=4]
Region 4: I/O ports at 3020 [size=32]
Region 5: Memory at d2404000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 04)
Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin D routed to IRQ 19
Region 0: Memory at d2404c00 (32-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 3000 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
01:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter [168c:001c] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:137b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d1300000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath5k
Kernel modules: ath5k
02:01.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 1000 [size=256]
Region 1: Memory at d1200000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: 8139too
Kernel modules: 8139too, 8139cp
** USB devices:
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 04f2:b057 Chicony Electronics Co., Ltd integrated USB webcam
Bus 001 Device 002: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0 multicard reader
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: 5.0.6
APT prefers stable
APT policy: (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.36-rc6-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_IE.UTF-8, LC_CTYPE=en_IE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.36-rc6-amd64 depends on:
ii debconf [deb 1.5.24 Debian configuration management sy
ii initramfs-to 0.92o tools for generating an initramfs
ii linux-base 2.6.36~rc6-1~experimental.1 Linux image base package
ii module-init- 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.36-rc6-amd64 recommends:
ii firmware-linux-free 2.6.32-5 Binary firmware for various driver
Versions of packages linux-image-2.6.36-rc6-amd64 suggests:
ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.36 <none> (no description available)
Versions of packages linux-image-2.6.36-rc6-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.36-rc6-amd64/prerm/removing-running-kernel-2.6.36-rc6-amd64: true
linux-image-2.6.36-rc6-amd64/postinst/depmod-error-initrd-2.6.36-rc6-amd64: false
linux-image-2.6.36-rc6-amd64/postinst/ignoring-do-bootloader-2.6.36-rc6-amd64:
linux-image-2.6.36-rc6-amd64/postinst/missing-firmware-2.6.36-rc6-amd64:
Reply to: