Bug#600656: linux-image-2.6.32-5-amd64: Crash after nullpointer dereference during gparted reading a disk
Package: linux-2.6
Version: 2.6.32-23
Severity: important
My system crashes reproducibly during the gparted operation "move /dev/sda1 to the right" in the read-only test stage.
It is very hard to track down as the system freezes (ping is working, no other networking stuff like sshd, screen
is black, keyboard doesn't react, not even the shift indicator LEDs). After reboot, no indication of the problem
can be found in the log files anymore.
Running tail -f /var/log/kern.log on a different machine, and running gparted with remote X11 did the trick to
get to some information. The following lines were the last words to hear from the machine:
Oct 18 21:44:10 xxxxxxx kernel: [88819.864398] BUG: unable to handle kernel NULL pointer dereference at (null)
Oct 18 21:44:10 xxxxxxx kernel: [88819.864413] IP: [<ffffffff8110c456>] drop_buffers+0x23/0x9d
Oct 18 21:44:10 xxxxxxx kernel: [88819.864429] PGD 7d9c4067 PUD 1f542067 PMD 0
Oct 18 21:44:10 xxxxxxx kernel: [88819.864439] Oops: 0000 [#1] SMP
gparted was attempting to read a 511.94 GiB sized partition on a SATA disk with a block size of 16.00 MiB. The
crash orccured at 365.60 GiB (in case that matters). The file system on the partition in question is reported
OK by fsck. A test with dd if=/dev/sda1 of=/dev/null bs=4096 worked out OK (didn't try with 16M block size).
SMART status if the hard disk is passed.
I suspect some rare freezes of the machine to come from the same origin, though I didn't find another way
to actually reproduce the problem than running the described gparted operation.
Unfortunately, I have no idea if this bug report contains any useful information, nor how to provide any
additional.
Best regards,
Andreas.
-- Package-specific info:
** Version:
Linux version 2.6.32-5-amd64 (Debian 2.6.32-23) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-3) ) #1 SMP Fri Sep 17 21:50:19 UTC 2010
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=cefff7a6-c772-42c0-b4d6-8d610692ae65 ro console=tty0 quiet vga=795 splash
** Tainted: P (1)
* Proprietary module has been loaded.
** Kernel log:
[ 11.951885] (Note that use of the override may cause unknown side effects.)
[ 11.951904] amd64_edac: probe of 0000:00:18.2 failed with error -22
[ 12.098101] Linux video capture interface: v2.00
[ 12.130466] em28xx: New device TerraTec Electronic GmbH Cinergy Hybrid T USB XS (2882) @ 480 Mbps (0ccd:005e, interface 0, class 0)
[ 12.130602] em28xx #0: chip ID is em2882/em2883
[ 12.171879] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
[ 12.171886] Intel ICH 0000:00:04.0: PCI INT A -> Link[APCJ] -> GSI 22 (level, low) -> IRQ 22
[ 12.171918] Intel ICH 0000:00:04.0: setting latency timer to 64
[ 12.305842] em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 5e 00 d0 12 5c 03 9e 40 de 1c
[ 12.305850] em28xx #0: i2c eeprom 10: 6a 34 27 57 46 07 01 00 00 00 00 00 00 00 00 00
[ 12.305857] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 1e 00 00
[ 12.305864] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00
[ 12.305871] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 12.305877] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 12.305884] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 34 03 54 00 65 00
[ 12.305891] em28xx #0: i2c eeprom 70: 72 00 72 00 61 00 54 00 65 00 63 00 20 00 45 00
[ 12.305898] em28xx #0: i2c eeprom 80: 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00 69 00
[ 12.305904] em28xx #0: i2c eeprom 90: 63 00 20 00 47 00 6d 00 62 00 48 00 00 00 40 03
[ 12.305911] em28xx #0: i2c eeprom a0: 43 00 69 00 6e 00 65 00 72 00 67 00 79 00 20 00
[ 12.305918] em28xx #0: i2c eeprom b0: 48 00 79 00 62 00 72 00 69 00 64 00 20 00 54 00
[ 12.305924] em28xx #0: i2c eeprom c0: 20 00 55 00 53 00 42 00 20 00 58 00 53 00 20 00
[ 12.305931] em28xx #0: i2c eeprom d0: 28 00 32 00 38 00 38 00 32 00 29 00 00 00 1c 03
[ 12.305938] em28xx #0: i2c eeprom e0: 30 00 37 00 30 00 34 00 30 00 32 00 30 00 30 00
[ 12.305944] em28xx #0: i2c eeprom f0: 33 00 31 00 37 00 32 00 00 00 00 00 00 00 00 00
[ 12.305952] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xe613babe
[ 12.305954] em28xx #0: EEPROM info:
[ 12.305956] em28xx #0: AC97 audio (5 sample rates)
[ 12.305957] em28xx #0: 500mA max power
[ 12.305959] em28xx #0: Table at 0x27, strings=0x409e, 0x1cde, 0x346a
[ 12.306717] em28xx #0: Identified as Terratec Hybrid XS (em2882) (card=55)
[ 12.306719] em28xx #0:
[ 12.306720]
[ 12.352445] em28xx #0: The support for this board weren't valid yet.
[ 12.375354] em28xx #0: Please send a report of having this working
[ 12.397902] em28xx #0: not to V4L mailing list (and/or to other addresses)
[ 12.397903]
[ 12.451274] tvp5150 2-005c: chip found @ 0xb8 (em28xx #0)
[ 12.456889] tuner 2-0061: chip found @ 0xc2 (em28xx #0)
[ 12.478959] xc2028 2-0061: creating new instance
[ 12.478963] xc2028 2-0061: type set to XCeive xc2028/xc3028 tuner
[ 12.478973] usb 1-8: firmware: requesting xc3028-v27.fw
[ 12.508039] intel8x0_measure_ac97_clock: measured 55876 usecs (2744 samples)
[ 12.508043] intel8x0: clocking to 46916
[ 12.531530] xc2028 2-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[ 12.576021] xc2028 2-0061: Loading firmware for type=BASE (1), id 0000000000000000.
[ 13.498852] xc2028 2-0061: Loading firmware for type=(0), id 000000000000b700.
[ 13.513718] SCODE (20000000), id 000000000000b700:
[ 13.513721] xc2028 2-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000.
[ 13.696096] em28xx #0: Config register raw data: 0xd0
[ 13.696844] em28xx #0: AC97 vendor ID = 0xffffffff
[ 13.697219] em28xx #0: AC97 features = 0x6a90
[ 13.697221] em28xx #0: Empia 202 AC97 audio processor detected
[ 13.825342] tvp5150 2-005c: tvp5150am1 detected.
[ 13.921719] em28xx #0: v4l2 driver version 0.1.2
[ 14.007194] em28xx #0: V4L2 video device registered as /dev/video0
[ 14.007196] em28xx #0: V4L2 VBI device registered as /dev/vbi0
[ 14.020043] usbcore: registered new interface driver em28xx
[ 14.020046] em28xx driver loaded
[ 14.040995] em28xx-audio.c: probing for em28x1 non standard usbaudio
[ 14.040999] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
[ 14.042770] Em28xx: Initialized (Em28xx Audio Extension) extension
[ 14.137346] tvp5150 2-005c: tvp5150am1 detected.
[ 14.571869] Adding 1028152k swap on /dev/sdb2. Priority:-1 extents:1 across:1028152k
[ 14.969123] EXT3 FS on sdb1, internal journal
[ 15.049941] device-mapper: uevent: version 1.0.3
[ 15.050095] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 15.285893] Uniform Multi-Platform E-IDE driver
[ 15.305299] ide-cd driver 5.00
[ 15.311232] ide-gd driver 1.18
[ 15.314376] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[ 15.360874] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ processors (2 cpu cores) (version 2.20.00)
[ 15.360973] powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0xa
[ 15.360975] powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0x12
[ 15.585603] it87: Found IT8712F chip at 0x290, revision 5
[ 17.145025] Clocksource tsc unstable (delta = -291999038 ns)
[ 23.906065] kjournald starting. Commit interval 5 seconds
[ 23.906375] EXT3 FS on sdb8, internal journal
[ 23.906385] EXT3-fs: mounted filesystem with ordered data mode.
[ 23.961111] kjournald starting. Commit interval 5 seconds
[ 23.961341] EXT3 FS on sdb5, internal journal
[ 23.961350] EXT3-fs: mounted filesystem with ordered data mode.
[ 24.013843] kjournald starting. Commit interval 5 seconds
[ 24.014043] EXT3 FS on sdb6, internal journal
[ 24.014051] EXT3-fs: mounted filesystem with ordered data mode.
[ 24.128717] kjournald starting. Commit interval 5 seconds
[ 24.172302] EXT3 FS on sdb7, internal journal
[ 24.172317] EXT3-fs: mounted filesystem with ordered data mode.
[ 24.655501] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 24.770187] EXT4-fs (sda3): mounted filesystem with ordered data mode
[ 31.122330] fuse init (API version 7.13)
[ 33.624773] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input7
[ 38.392023] eth0: no IPv6 routers present
[ 44.007852] capifs: Rev 1.1.2.3
[ 47.602904] lp0: using parport0 (interrupt-driven).
[ 47.856148] ppdev: user-space parallel port driver
[ 67.033790] tvp5150 2-005c: tvp5150am1 detected.
[ 67.308064] xc2028 2-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
[ 68.267852] (0), id 00000000000000ff:
[ 68.267860] xc2028 2-0061: Loading firmware for type=(0), id 0000000100000007.
[ 68.282603] xc2028 2-0061: Loading SCODE for type=MONO SCODE HAS_IF_5320 (60008000), id 0000000f00000007.
** Model information
sys_vendor:
product_name:
product_version:
bios_vendor: Award Software International, Inc.
bios_version: F1
board_vendor: Gigabyte Technology Co., Ltd.
board_name: GA-K8NF-9-RH
board_version: x.x
** Loaded modules:
Module Size Used by
cpufreq_conservative 5162 0
cpufreq_stats 2659 0
ppdev 5030 0
lp 7462 0
capifs 2605 1
binfmt_misc 6399 1
uinput 6376 1
fuse 49998 1
ext4 288329 2
jbd2 66759 1 ext4
crc16 1319 1 ext4
it87 15879 0
hwmon_vid 1828 1 it87
eeprom 3337 0
cpufreq_userspace 1960 0
cpufreq_powersave 902 0
powernow_k8 10946 1
psmouse 49729 0
ide_generic 1121 0 [permanent]
ide_gd_mod 20353 0
ide_cd_mod 24712 0
ide_core 71418 3 ide_generic,ide_gd_mod,ide_cd_mod
dm_crypt 10427 0
dm_mod 53562 1 dm_crypt
em28xx_alsa 5667 0
tuner_xc2028 16033 1
tuner 16140 1
tvp5150 10662 1
snd_intel8x0 24170 2
snd_ac97_codec 99186 1 snd_intel8x0
ac97_bus 1086 1 snd_ac97_codec
snd_pcm_oss 32591 0
em28xx 74838 1 em28xx_alsa
snd_mixer_oss 12606 1 snd_pcm_oss
v4l2_common 11656 3 tuner,tvp5150,em28xx
videodev 29881 4 tuner,tvp5150,em28xx,v4l2_common
snd_pcm 60503 5 em28xx_alsa,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
v4l1_compat 11442 1 videodev
v4l2_compat_ioctl32 8474 1 videodev
snd_seq_midi 4400 0
ir_common 24271 1 em28xx
snd_rawmidi 15515 1 snd_seq_midi
snd_seq_midi_event 4628 1 snd_seq_midi
videobuf_vmalloc 4760 1 em28xx
snd_seq 42737 3 snd_seq_midi,snd_seq_midi_event
snd_timer 15582 3 snd_pcm,snd_seq
videobuf_core 12212 2 em28xx,videobuf_vmalloc
edac_core 29261 0
joydev 8411 0
tveeprom 12057 1 em28xx
snd_seq_device 4493 3 snd_seq_midi,snd_rawmidi,snd_seq
i2c_nforce2 5280 0
edac_mce_amd 6401 0
nvidia 10646314 28
i2c_core 15680 10 eeprom,tuner_xc2028,tuner,tvp5150,em28xx,v4l2_common,videodev,tveeprom,i2c_nforce2,nvidia
snd 46414 13 em28xx_alsa,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
k8temp 3155 0
soundcore 4598 1 snd
snd_page_alloc 6169 2 snd_intel8x0,snd_pcm
evdev 7352 17
parport_pc 18855 1
parport 27954 3 ppdev,lp,parport_pc
serio_raw 3752 0
pcspkr 1699 0
button 4650 0
processor 30239 1 powernow_k8
ext3 106134 5
jbd 36877 1 ext3
mbcache 5050 2 ext4,ext3
hid_cherry 1501 0
usbhid 33148 0
hid 62793 2 hid_cherry,usbhid
sg 18712 0
sd_mod 29713 10
crc_t10dif 1276 1 sd_mod
sr_mod 12602 0
cdrom 29415 2 ide_cd_mod,sr_mod
ohci_hcd 19116 0
firewire_ohci 19404 0
ata_generic 2983 0
sata_nv 19134 8
firewire_core 36656 1 firewire_ohci
crc_itu_t 1307 1 firewire_core
ehci_hcd 30895 0
floppy 49087 0
thermal 11674 0
thermal_sys 11942 2 processor,thermal
pata_amd 9869 0
libata 133328 3 ata_generic,sata_nv,pata_amd
forcedeth 45384 0
scsi_mod 121861 4 sg,sd_mod,sr_mod,libata
usbcore 121698 6 em28xx_alsa,em28xx,usbhid,ohci_hcd,ehci_hcd
nls_base 6377 1 usbcore
** PCI devices:
00:00.0 Memory controller [0580]: nVidia Corporation CK804 Memory Controller [10de:005e] (rev a4)
Subsystem: Giga-byte Technology GA-K8N Ultra-9 Mainboard [1458:5000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 ISA bridge [0601]: nVidia Corporation CK804 ISA Bridge [10de:0050] (rev b1)
Subsystem: Giga-byte Technology GA-K8N Ultra-9 Mainboard [1458:0c11]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.1 SMBus [0c05]: nVidia Corporation CK804 SMBus [10de:0052] (rev a2)
Subsystem: Giga-byte Technology GA-K8N Ultra-9 Mainboard [1458:0c11]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 12
Region 0: I/O ports at b000 [size=32]
Region 4: I/O ports at 1c00 [size=64]
Region 5: I/O ports at 1c40 [size=64]
Capabilities: <access denied>
Kernel driver in use: nForce2_smbus
00:02.0 USB Controller [0c03]: nVidia Corporation CK804 USB Controller [10de:005a] (rev a2) (prog-if 10 [OHCI])
Subsystem: Giga-byte Technology GA-K8N Ultra-9 Mainboard [1458:5004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f3102000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
00:02.1 USB Controller [0c03]: nVidia Corporation CK804 USB Controller [10de:005b] (rev a4) (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology GA-K8N Ultra-9 Mainboard [1458:5004]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 22
Region 0: Memory at f3104000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:04.0 Multimedia audio controller [0401]: nVidia Corporation CK804 AC'97 Audio Controller [10de:0059] (rev a2)
Subsystem: Giga-byte Technology Device [1458:ae01]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at bc00 [size=256]
Region 1: I/O ports at c000 [size=256]
Region 2: Memory at f3105000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: Intel ICH
00:06.0 IDE interface [0101]: nVidia Corporation CK804 IDE [10de:0053] (rev f3) (prog-if 8a [Master SecP PriP])
Subsystem: Giga-byte Technology GA-K8N Ultra-9 Mainboard [1458:5002]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at f000 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_amd
00:07.0 IDE interface [0101]: nVidia Corporation CK804 Serial ATA Controller [10de:0054] (rev f3) (prog-if 85 [Master SecO PriO])
Subsystem: Giga-byte Technology GA-K8N Ultra-9 Mainboard [1458:b003]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at 09f0 [size=8]
Region 1: I/O ports at 0bf0 [size=4]
Region 2: I/O ports at 0970 [size=8]
Region 3: I/O ports at 0b70 [size=4]
Region 4: I/O ports at d400 [size=16]
Region 5: Memory at f3100000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
00:08.0 IDE interface [0101]: nVidia Corporation CK804 Serial ATA Controller [10de:0055] (rev f3) (prog-if 85 [Master SecO PriO])
Subsystem: Giga-byte Technology GA-K8N Ultra-9 Mainboard [1458:b003]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at 09e0 [size=8]
Region 1: I/O ports at 0be0 [size=4]
Region 2: I/O ports at 0960 [size=8]
Region 3: I/O ports at 0b60 [size=4]
Region 4: I/O ports at e800 [size=16]
Region 5: Memory at f3101000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
00:09.0 PCI bridge [0604]: nVidia Corporation CK804 PCI Bridge [10de:005c] (rev a2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Memory behind bridge: f3000000-f30fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
00:0a.0 Bridge [0680]: nVidia Corporation CK804 Ethernet Controller [10de:0057] (rev a3)
Subsystem: Giga-byte Technology GA-K8N Ultra-9 Mainboard [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f3103000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at ec00 [size=8]
Capabilities: <access denied>
Kernel driver in use: forcedeth
00:0b.0 PCI bridge [0604]: nVidia Corporation CK804 PCIE Bridge [10de:005d] (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0c.0 PCI bridge [0604]: nVidia Corporation CK804 PCIE Bridge [10de:005d] (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00009000-00009fff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0d.0 PCI bridge [0604]: nVidia Corporation CK804 PCIE Bridge [10de:005d] (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00008000-00008fff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0e.0 PCI bridge [0604]: nVidia Corporation CK804 PCIE Bridge [10de:005d] (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Memory behind bridge: f0000000-f2ffffff
Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: k8temp
01:0a.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB82AA2 IEEE-1394b Link Layer Controller [104c:8025] (rev 01) (prog-if 10 [OHCI])
Subsystem: Giga-byte Technology GA-K8N Ultra-9 Mainboard [1458:1000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (750ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f3004000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at f3000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
05:00.0 VGA compatible controller [0300]: nVidia Corporation G71 [GeForce 7300 GS] [10de:01df] (rev a1) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:81f3]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f0000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f1000000 (64-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at f2000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
** USB devices:
Bus 002 Device 003: ID 0458:000e KYE Systems Corp. (Mouse Systems) VideoCAM Web
Bus 002 Device 002: ID 046a:0023 Cherry GmbH CyMotion Master Linux Keyboard
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0ccd:005e TerraTec Electronic GmbH
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii debconf [debconf-2.0] 1.5.36 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.4 tools for generating an initramfs
ii linux-base 2.6.32-23 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-amd64 recommends:
ii firmware-linux-free 2.6.32-23 Binary firmware for various driver
Versions of packages linux-image-2.6.32-5-amd64 suggests:
ii grub 0.97-63 GRand Unified Bootloader (dummy pa
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/postinst/bootloader-error-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/prerm/would-invalidate-boot-loader-2.6.32-5-amd64: true
linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false
linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true
linux-image-2.6.32-5-amd64/postinst/bootloader-test-error-2.6.32-5-amd64:
Reply to: