[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#600528: linux-image-2.6.36-rc6-amd64: 2.6.36-rc6 EDAC driver causes oops on boot



Package: linux-2.6
Version: 2.6.36~rc6-1~experimental.1
Severity: normal
Tags: experimental

Trying out 2.6.36-rc6 as packaged (I need the experimental Nvidia
Xorg driver, so 2.6.32 won't do, and 2.6.35 packages seem to have been
abandoned).  On boot, I get an oops (during "wait for /dev to be fully
populated") which I can avoid by blacklisting edac_core and i7core_edac.
However, the module that actually caused the crash may be a driver
dependent on those.

Kernel log below "Package-specific info:" is with those modules blacklisted.
Here is the actual oops:

[    3.943612] EDAC MC: Ver: 2.1.0 Oct  4 2010
[    3.951329] PCI: Discovered peer bus ff
[    3.952079] BUG: unable to handle kernel NULL pointer dereference at 00000000000001a4
[    3.952194] IP: [<ffffffffa0351e54>] edac_create_mci_instance_attributes+0xe0/0x139 [edac_core]
[    3.952279] PGD 1bd525067 PUD 1bd66c067 PMD 0 
[    3.952416] Oops: 0000 [#1] SMP 
[    3.952516] last sysfs file: /sys/devices/pci0000:ff/0000:ff:04.1/class
[    3.952562] CPU 0 
[    3.952597] Modules linked in: i7core_edac(+) edac_core tpm_bios button snd_timer processor evdev snd_seq_device pcspkr snd soundcore nls_base wmi snd_page_alloc ext4 mbcache jbd2 crc16 sd_mod crc_t10dif ata_generic ata_piix libata scsi_mod thermal thermal_sys
[    3.953559] 
[    3.953596] Pid: 478, comm: modprobe Not tainted 2.6.36-rc6-amd64 #1 MSI X58M (MS-7593)/MS-7593
[    3.953646] RIP: 0010:[<ffffffffa0351e54>]  [<ffffffffa0351e54>] edac_create_mci_instance_attributes+0xe0/0x139 [edac_core]
[    3.953736] RSP: 0018:ffff8801bd0d1b88  EFLAGS: 00010286
[    3.953794] RAX: 00000000000001a4 RBX: ffff8801bd44bba0 RCX: 0000000000000000
[    3.953854] RDX: ffff8801be8f40f0 RSI: ffffffffa0354dc0 RDI: ffff8801bd44bbb0
[    3.953914] RBP: ffffffffa0364d28 R08: ffff880001a11928 R09: ffff8801be8f4130
[    3.953975] R10: 00000000fffffff4 R11: ffff8801be8f4130 R12: ffff8801bd44bbb0
[    3.954035] R13: ffff8801be8f4000 R14: ffff8801be8f4130 R15: 0000000000000060
[    3.954096] FS:  00007fd1fac6b700(0000) GS:ffff880001a00000(0000) knlGS:0000000000000000
[    3.954172] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    3.954229] CR2: 00000000000001a4 CR3: 00000001bd522000 CR4: 00000000000006f0
[    3.954289] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    3.954350] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[    3.954411] Process modprobe (pid: 478, threadinfo ffff8801bd0d0000, task ffff8801bd5f5f60)
[    3.954487] Stack:
[    3.954536]  ffff8801be8f40f0 ffff8801bd44bf70 ffff8801bb500af0 ffff8801bd44bf60
[    3.954692] <0> ffffffffa0364c38 ffff8801bd44bf70 ffff8801be8f4000 ffff8801be8f4130
[    3.954924] <0> 0000000000000060 ffffffffa0351e75 ffff8801be8f40f0 ffff8801be8f40f0
[    3.955202] Call Trace:
[    3.955257]  [<ffffffffa0351e75>] ? edac_create_mci_instance_attributes+0x101/0x139 [edac_core]
[    3.955335]  [<ffffffffa0351f1b>] ? edac_create_sysfs_mci_device+0x6e/0x1d3 [edac_core]
[    3.955409]  [<ffffffffa03509a5>] ? edac_mc_add_mc+0x8d/0x16d [edac_core]
[    3.955468]  [<ffffffffa0363dd8>] ? i7core_probe+0x842/0x9f9 [i7core_edac]
[    3.955527]  [<ffffffff811a24e7>] ? local_pci_probe+0x49/0x93
[    3.955583]  [<ffffffff811a3226>] ? pci_device_probe+0xc2/0xef
[    3.955639]  [<ffffffff81228782>] ? driver_sysfs_add+0x66/0x8d
[    3.955695]  [<ffffffff812288c3>] ? driver_probe_device+0xa8/0x138
[    3.955751]  [<ffffffff812289a2>] ? __driver_attach+0x4f/0x6f
[    3.955806]  [<ffffffff81228953>] ? __driver_attach+0x0/0x6f
[    3.955861]  [<ffffffff81227f4c>] ? bus_for_each_dev+0x44/0x78
[    3.955917]  [<ffffffff812283a4>] ? bus_add_driver+0xa8/0x1f0
[    3.955972]  [<ffffffff81228c49>] ? driver_register+0x90/0xf8
[    3.956028]  [<ffffffff811a3470>] ? __pci_register_driver+0x4e/0xbe
[    3.956085]  [<ffffffffa036807d>] ? i7core_init+0x7d/0x9d [i7core_edac]
[    3.956142]  [<ffffffffa0368000>] ? i7core_init+0x0/0x9d [i7core_edac]
[    3.956200]  [<ffffffff81002079>] ? do_one_initcall+0x78/0x131
[    3.956256]  [<ffffffff81072982>] ? sys_init_module+0x97/0x1d5
[    3.956312]  [<ffffffff81008a02>] ? system_call_fastpath+0x16/0x1b
[    3.956367] Code: 8d 63 10 4c 89 33 48 c7 c6 c0 4d 35 a0 4c 89 e7 48 89 43 08 48 89 18 48 8b 45 10 4c 89 6b 58 48 89 43 50 48 8b 45 10 48 8b 14 24 <48> 8b 08 31 c0 e8 8e b3 e3 e0 85 c0 75 3c 48 8b 43 50 4c 89 e2 
[    3.958430] RIP  [<ffffffffa0351e54>] edac_create_mci_instance_attributes+0xe0/0x139 [edac_core]
[    3.958535]  RSP <ffff8801bd0d1b88>
[    3.958586] CR2: 00000000000001a4
[    3.958648] ---[ end trace d4fe4ac7c6d47dfe ]---


-- Package-specific info:
** Version:
Linux version 2.6.36-rc6-amd64 (Debian 2.6.36~rc6-1~experimental.1) (ben@decadent.org.uk) (gcc version 4.4.5 (Debian 4.4.4-17) ) #1 SMP Mon Oct 4 09:56:45 UTC 2010

** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.36-rc6-amd64 root=UUID=80eabe2b-76e2-4a6c-a00e-df8e6cc0dc1d ro quiet

** Not tainted

** Kernel log:
[    4.482399]   alloc irq_desc for 42 on node -1
[    4.482403]   alloc kstat_irqs on node -1
[    4.482422] firewire_ohci 0000:07:00.0: irq 42 for MSI/MSI-X
[    4.482451] firewire_ohci: Added fw-ohci device 0000:07:00.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x1
[    4.583712] ahci 0000:05:00.0: version 3.0
[    4.583729] ahci 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    4.598369] ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    4.598375] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
[    4.598382] ahci 0000:05:00.0: setting latency timer to 64
[    4.598702] scsi6 : ahci
[    4.598820] scsi7 : ahci
[    4.598900] ata7: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe100 irq 17
[    4.598904] ata8: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe180 irq 17
[    4.636887] usbcore: registered new interface driver usbserial
[    4.636899] USB Serial support registered for generic
[    4.636912] usbcore: registered new interface driver usbserial_generic
[    4.636914] usbserial: USB Serial Driver core
[    4.770111] usb 3-1: new low speed USB device using uhci_hcd and address 2
[    4.918010] ata7: SATA link down (SStatus 0 SControl 300)
[    4.918014] ata8: SATA link down (SStatus 0 SControl 300)
[    4.943469] USB Serial support registered for GSM modem (1-port)
[    4.943502] usbcore: registered new interface driver option
[    4.943503] option: v0.7.2:USB Driver for GSM modems
[    4.945776] usb 3-1: New USB device found, idVendor=046d, idProduct=c018
[    4.945780] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.945783] usb 3-1: Product: USB Optical Mouse
[    4.945786] usb 3-1: Manufacturer: Logitech
[    4.977515] usbcore: registered new interface driver hiddev
[    4.990089] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input4
[    4.990163] generic-usb 0003:046D:C018.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.0-1/input0
[    4.990175] usbcore: registered new interface driver usbhid
[    4.990177] usbhid: USB HID core driver
[    5.630838] Adding 17578120k swap on /dev/sda2.  Priority:-1 extents:1 across:17578120k 
[    5.634086] EXT4-fs (sda1): re-mounted. Opts: (null)
[    5.792232] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    6.124005] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    6.767167] r8169 0000:06:00.0: eth0: link up
[    6.767174] r8169 0000:06:00.0: eth0: link up
[    6.864965] fuse init (API version 7.15)
[   10.096357] Bluetooth: Core ver 2.15
[   10.096366] NET: Registered protocol family 31
[   10.096367] Bluetooth: HCI device and connection manager initialized
[   10.096368] Bluetooth: HCI socket layer initialized
[   10.126899] Bluetooth: L2CAP ver 2.15
[   10.126902] Bluetooth: L2CAP socket layer initialized
[   10.140668] Bluetooth: RFCOMM TTY layer initialized
[   10.140675] Bluetooth: RFCOMM socket layer initialized
[   10.140678] Bluetooth: RFCOMM ver 1.11
[   10.217905] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   10.217909] Bluetooth: BNEP filters: protocol multicast
[   10.409191] Bluetooth: SCO (Voice Link) ver 0.6
[   10.409193] Bluetooth: SCO socket layer initialized
[   10.447831] [drm] Initialized drm 1.1.0 20060810
[   10.522535] nouveau 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   10.522544] nouveau 0000:02:00.0: setting latency timer to 64
[   10.525974] [drm] nouveau 0000:02:00.0: Detected an NV50 generation card (0x094100a1)
[   10.530511] [drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PRAMIN
[   10.574477] lp: driver loaded but no devices found
[   10.589359] [drm] nouveau 0000:02:00.0: ... appears to be valid
[   10.589361] [drm] nouveau 0000:02:00.0: BIT BIOS found
[   10.589363] [drm] nouveau 0000:02:00.0: Bios version 62.94.62.00
[   10.589365] [drm] nouveau 0000:02:00.0: TMDS table version 2.0
[   10.589367] [drm] nouveau 0000:02:00.0: Found Display Configuration Block version 4.0
[   10.589369] [drm] nouveau 0000:02:00.0: Raw DCB entry 0: 02000300 00000028
[   10.589370] [drm] nouveau 0000:02:00.0: Raw DCB entry 1: 01000302 00020030
[   10.589372] [drm] nouveau 0000:02:00.0: Raw DCB entry 2: 04011310 00000028
[   10.589373] [drm] nouveau 0000:02:00.0: Raw DCB entry 3: 02011312 00020030
[   10.589374] [drm] nouveau 0000:02:00.0: Raw DCB entry 4: 010223f1 00c0c080
[   10.589376] [drm] nouveau 0000:02:00.0: DCB connector table: VHER 0x40 5 16 4
[   10.589378] [drm] nouveau 0000:02:00.0:   0: 0x00001030: type 0x30 idx 0 tag 0x07
[   10.589380] [drm] nouveau 0000:02:00.0:   1: 0x00002130: type 0x30 idx 1 tag 0x08
[   10.589381] [drm] nouveau 0000:02:00.0:   2: 0x00000210: type 0x10 idx 2 tag 0xff
[   10.589383] [drm] nouveau 0000:02:00.0:   3: 0x00000211: type 0x11 idx 3 tag 0xff
[   10.589385] [drm] nouveau 0000:02:00.0:   4: 0x00000213: type 0x13 idx 4 tag 0xff
[   10.589388] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0xD689
[   10.638452] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0xDAFD
[   10.654170] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0xEAC6
[   10.654180] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0xEBE7
[   10.662113] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset 0xEE64
[   10.662117] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table at offset 0xEEC9
[   10.662785] ppdev: user-space parallel port driver
[   10.686189] [drm] nouveau 0000:02:00.0: 0xEEC9: Condition still not met after 20ms, skipping following opcodes
[   10.686208] [drm] nouveau 0000:02:00.0: Detected 512MiB VRAM
[   10.784905] [TTM] Zone  kernel: Available graphics memory: 3061032 kiB.
[   10.784909] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB.
[   10.784911] [TTM] Initializing pool allocator.
[   10.871944] [drm] nouveau 0000:02:00.0: 512 MiB GART (aperture)
[   10.871954] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[   10.876710] [drm] nouveau 0000:02:00.0: DCB encoder 1 unknown
[   10.876715] [drm] nouveau 0000:02:00.0: TV-1 has no encoders, removing
[   10.909013] [drm] nouveau 0000:02:00.0: Allocating FIFO number 1
[   10.928287] [drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 1
[   11.085638] [drm] nouveau 0000:02:00.0: allocated 1600x1200 fb: 0x40240000, bo ffff8801bd750800
[   11.085788] Console: switching to colour frame buffer device 200x75
[   11.085792] fb0: nouveaufb frame buffer device
[   11.085793] drm: registered panic notifier
[   11.085797] [drm] Initialized nouveau 0.0.16 20090420 for 0000:02:00.0 on minor 0
[   11.535232] [drm] nouveau 0000:02:00.0: Allocating FIFO number 2
[   11.555455] [drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 2
[   17.021655] eth0: no IPv6 routers present

** Model information
sys_vendor: MSI
product_name: MS-7593
product_version: 1.0
chassis_vendor: MICRO-STAR INTERNATIONAL CO.,LTD
chassis_version: 1.0
bios_vendor: American Megatrends Inc.
bios_version: V3.5
board_vendor: MSI
board_name: MSI X58M (MS-7593)
board_version: 1.0

** Loaded modules:
Module                  Size  Used by
parport_pc             18773  0 
ppdev                   5491  0 
lp                      8158  0 
parport                25614  3 parport_pc,ppdev,lp
nouveau               382938  2 
ttm                    43951  1 nouveau
drm_kms_helper         21445  1 nouveau
drm                   155393  4 nouveau,ttm,drm_kms_helper
sco                     7435  2 
i2c_algo_bit            4105  1 nouveau
video                  18617  1 nouveau
output                  1748  1 video
bnep                    9663  2 
rfcomm                 29288  0 
l2cap                  30116  6 bnep,rfcomm
bluetooth              43558  6 sco,bnep,rfcomm,l2cap
rfkill                 13886  3 bluetooth
acpi_cpufreq            5335  0 
mperf                   1275  1 acpi_cpufreq
cpufreq_userspace       2048  0 
cpufreq_stats           2633  0 
cpufreq_conservative     7646  0 
cpufreq_powersave        942  0 
fuse                   54430  1 
usbhid                 31128  0 
hid                    64007  1 usbhid
option                 15458  0 
usb_wwan                7855  1 option
usbserial              26233  2 option,usb_wwan
ahci                   19473  0 
pata_jmicron            2336  0 
uhci_hcd               18282  0 
r8169                  28602  0 
mii                     3266  1 r8169
firewire_ohci          21978  0 
firewire_core          42225  1 firewire_ohci
crc_itu_t               1331  1 firewire_core
libahci                15971  1 ahci
snd_hda_codec_realtek   256966  1 
sg                     19079  0 
sr_mod                 12887  0 
cdrom                  29785  1 sr_mod
ehci_hcd               31102  0 
pcspkr                  1739  0 
i2c_i801                7718  0 
shpchp                 21955  0 
usbcore               118328  7 usbhid,option,usb_wwan,usbserial,uhci_hcd,ehci_hcd
pci_hotplug            19711  1 shpchp
tpm_tis                 7045  0 
i2c_core               16394  5 nouveau,drm_kms_helper,drm,i2c_algo_bit,i2c_i801
evdev                   7282  7 
tpm                     9635  1 tpm_tis
tpm_bios                4661  1 tpm
snd_hda_intel          19642  0 
snd_hda_codec          66997  2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep               5468  1 snd_hda_codec
snd_pcm_oss            31980  0 
snd_mixer_oss          12719  1 snd_pcm_oss
button                  4706  1 nouveau
snd_pcm                61725  3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_midi            4454  0 
snd_rawmidi            15929  1 snd_seq_midi
snd_seq_midi_event      4754  1 snd_seq_midi
snd_seq                42486  2 snd_seq_midi,snd_seq_midi_event
snd_timer              16288  2 snd_pcm,snd_seq
snd_seq_device          4531  3 snd_seq_midi,snd_rawmidi,snd_seq
snd                    47020  11 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore               4598  1 snd
snd_page_alloc          6321  2 snd_hda_intel,snd_pcm
processor              25923  9 acpi_cpufreq
nls_base                6369  1 usbcore
wmi                     7209  0 
ext4                  263877  2 
mbcache                 5088  1 ext4
jbd2                   57579  1 ext4
crc16                   1327  2 l2cap,ext4
sd_mod                 27506  4 
crc_t10dif              1300  1 sd_mod
ata_generic             2959  0 
ata_piix               20748  3 
libata                134106  5 ahci,pata_jmicron,libahci,ata_generic,ata_piix
scsi_mod              154372  4 sg,sr_mod,sd_mod,libata
thermal                12014  0 
thermal_sys            11764  3 video,processor,thermal

** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
allow-hotplug eth0
iface eth0 inet dhcp

** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 1000
    link/ether 40:61:86:cb:fc:55 brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.79/24 brd 192.168.1.255 scope global eth0
    inet6 fe80::4261:86ff:fecb:fc55/64 scope link 
       valid_lft forever preferred_lft forever

*** Device statistics:
Inter-|   Receive                                                |  Transmit
 face |bytes    packets errs drop fifo frame compressed multicast|bytes    packets errs drop fifo colls carrier compressed
    lo:    1104       8    0    0    0     0          0         0     1104       8    0    0    0     0       0          0
  eth0:  120327     366    0    0    0     0          0         0    38084     257    0    0    0     0       0          0

*** Protocol statistics:
Ip:
    224 total packets received
    1 with invalid addresses
    0 forwarded
    0 incoming packets discarded
    223 incoming packets delivered
    238 requests sent out
    40 dropped because of missing route
Icmp:
    0 ICMP messages received
    0 input ICMP message failed.
    ICMP input histogram:
    0 ICMP messages sent
    0 ICMP messages failed
    ICMP output histogram:
Tcp:
    14 active connections openings
    0 passive connection openings
    0 failed connection attempts
    1 connection resets received
    3 connections established
    147 segments received
    162 segments send out
    0 segments retransmited
    0 bad segments received.
    5 resets sent
Udp:
    75 packets received
    0 packets to unknown port received.
    0 packet receive errors
    74 packets sent
UdpLite:
TcpExt:
    11 delayed acks sent
    56 packet headers predicted
    24 acknowledgments not containing data payload received
    1 connections reset due to early user close
IpExt:
    InMcastPkts: 9
    OutMcastPkts: 11
    InBcastPkts: 2
    InOctets: 111576
    OutOctets: 31829
    InMcastOctets: 2583
    OutMcastOctets: 2663
    InBcastOctets: 557

*** Device features:
eth0: 0x180
lo: 0x13865

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port [8086:3405] (rev 13)
	Subsystem: Micro-Star International Co., Ltd. Device [1462:7593]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>

00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 [8086:3408] (rev 13) (prog-if 00 [Normal decode])
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 256 bytes
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 [8086:340a] (rev 13) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 256 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 0000b000-0000bfff
	Memory behind bridge: f8000000-fbbfffff
	Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:07.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 [8086:340e] (rev 13) (prog-if 00 [Normal decode])
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 256 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:14.0 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers [8086:342e] (rev 13) (prog-if 00 [8259])
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>

00:14.1 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers [8086:3422] (rev 13) (prog-if 00 [8259])
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>

00:14.2 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers [8086:3423] (rev 13) (prog-if 00 [8259])
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>

00:14.3 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub Throttle Registers [8086:3438] (rev 13) (prog-if 00 [8259])
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:1a.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI])
	Subsystem: Micro-Star International Co., Ltd. Device [1462:7593]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 4: I/O ports at ac00 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1a.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38] (prog-if 00 [UHCI])
	Subsystem: Micro-Star International Co., Ltd. Device [1462:7593]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 21
	Region 4: I/O ports at a880 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1a.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI])
	Subsystem: Micro-Star International Co., Ltd. Device [1462:7593]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin D routed to IRQ 19
	Region 4: I/O ports at a800 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1a.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI])
	Subsystem: Micro-Star International Co., Ltd. Device [1462:7593]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at f7ffe000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller [8086:3a3e]
	Subsystem: Micro-Star International Co., Ltd. Device [1462:7593]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 256 bytes
	Interrupt: pin A routed to IRQ 40
	Region 0: Memory at f7ff8000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: HDA Intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 [8086:3a40] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 256 bytes
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	I/O behind bridge: 00001000-00001fff
	Memory behind bridge: c0000000-c01fffff
	Prefetchable memory behind bridge: 00000000c0200000-00000000c03fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:1c.1 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 [8086:3a42] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 256 bytes
	Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
	I/O behind bridge: 0000c000-0000cfff
	Memory behind bridge: fbc00000-fbcfffff
	Prefetchable memory behind bridge: 00000000c0400000-00000000c05fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:1c.4 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 [8086:3a48] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 256 bytes
	Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: fbd00000-fbdfffff
	Prefetchable memory behind bridge: 00000000f6f00000-00000000f6ffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:1c.5 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6 [8086:3a4a] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 256 bytes
	Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: fbe00000-fbefffff
	Prefetchable memory behind bridge: 00000000c0600000-00000000c07fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:1d.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI])
	Subsystem: Micro-Star International Co., Ltd. Device [1462:7593]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 4: I/O ports at a480 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI])
	Subsystem: Micro-Star International Co., Ltd. Device [1462:7593]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 4: I/O ports at a400 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI])
	Subsystem: Micro-Star International Co., Ltd. Device [1462:7593]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 4: I/O ports at a080 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI])
	Subsystem: Micro-Star International Co., Ltd. Device [1462:7593]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at f7ffc000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 90) (prog-if 01 [Subtractive decode])
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=08, subordinate=08, sec-latency=32
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller [8086:3a16]
	Subsystem: Micro-Star International Co., Ltd. Device [1462:7593]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:1f.2 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 [8086:3a20] (prog-if 8f [Master SecP SecO PriP PriO])
	Subsystem: Micro-Star International Co., Ltd. Device [1462:7593]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 0: I/O ports at a000 [size=8]
	Region 1: I/O ports at 9c00 [size=4]
	Region 2: I/O ports at 9880 [size=8]
	Region 3: I/O ports at 9800 [size=4]
	Region 4: I/O ports at 9480 [size=16]
	Region 5: I/O ports at 9400 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus Controller [8086:3a30]
	Subsystem: Micro-Star International Co., Ltd. Device [1462:7593]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at f7ff7c00 (64-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at 0400 [size=32]
	Kernel driver in use: i801_smbus

00:1f.5 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 [8086:3a26] (prog-if 85 [Master SecO PriO])
	Subsystem: Micro-Star International Co., Ltd. Device [1462:7593]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 0: I/O ports at 9000 [size=8]
	Region 1: I/O ports at 8c00 [size=4]
	Region 2: I/O ports at 8880 [size=8]
	Region 3: I/O ports at 8800 [size=4]
	Region 4: I/O ports at 8480 [size=16]
	Region 5: I/O ports at 8400 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: ata_piix

02:00.0 VGA compatible controller [0300]: nVidia Corporation G94 [GeForce 9600 GT] [10de:0622] (rev a1) (prog-if 00 [VGA controller])
	Subsystem: Elitegroup Computer Systems Device [1019:10a1]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 256 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
	Region 3: Memory at f8000000 (64-bit, non-prefetchable) [size=32M]
	Region 5: I/O ports at bc00 [size=128]
	Expansion ROM at fbb80000 [disabled] [size=512K]
	Capabilities: <access denied>
	Kernel driver in use: nouveau

05:00.0 SATA controller [0106]: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller [197b:2363] (rev 03) (prog-if 01 [AHCI 1.0])
	Subsystem: Micro-Star International Co., Ltd. Device [1462:7593]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 256 bytes
	Interrupt: pin A routed to IRQ 17
	Region 5: Memory at fbcfe000 (32-bit, non-prefetchable) [size=8K]
	Capabilities: <access denied>
	Kernel driver in use: ahci

05:00.1 IDE interface [0101]: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller [197b:2363] (rev 03) (prog-if 85 [Master SecO PriO])
	Subsystem: Micro-Star International Co., Ltd. Device [1462:7593]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 18
	Region 0: I/O ports at cc00 [size=8]
	Region 1: I/O ports at c880 [size=4]
	Region 2: I/O ports at c800 [size=8]
	Region 3: I/O ports at c480 [size=4]
	Region 4: I/O ports at c400 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: pata_jmicron

06:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)
	Subsystem: Micro-Star International Co., Ltd. Device [1462:7593]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 256 bytes
	Interrupt: pin A routed to IRQ 41
	Region 0: I/O ports at d800 [size=256]
	Region 2: Memory at fbdff000 (64-bit, non-prefetchable) [size=4K]
	Region 4: Memory at f6ff0000 (64-bit, prefetchable) [size=64K]
	Expansion ROM at fbdc0000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: r8169

07:00.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6315 Series Firewire Controller [1106:3403] (prog-if 10 [OHCI])
	Subsystem: Micro-Star International Co., Ltd. Device [1462:593d]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
	Latency: 0, Cache Line Size: 256 bytes
	Interrupt: pin A routed to IRQ 42
	Region 0: Memory at fbeff800 (64-bit, non-prefetchable) [size=2K]
	Region 2: I/O ports at e800 [size=256]
	Capabilities: <access denied>
	Kernel driver in use: firewire_ohci


** USB devices:
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 046d:c018 Logitech, Inc. Optical Wheel Mouse
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: squeeze/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (101, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.36-rc6-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.36-rc6-amd64 depends on:
ii  debconf [deb 1.5.36                      Debian configuration management sy
ii  initramfs-to 0.98.4                      tools for generating an initramfs
ii  linux-base   2.6.36~rc6-1~experimental.1 Linux image base package
ii  module-init- 3.12-1                      tools for managing Linux kernel mo

Versions of packages linux-image-2.6.36-rc6-amd64 recommends:
ii  firmware-linux-free           2.6.32-25  Binary firmware for various driver

Versions of packages linux-image-2.6.36-rc6-amd64 suggests:
pn  grub | lilo                   <none>     (no description available)
pn  linux-doc-2.6.36              <none>     (no description available)

Versions of packages linux-image-2.6.36-rc6-amd64 is related to:
pn  firmware-bnx2                 <none>     (no description available)
pn  firmware-bnx2x                <none>     (no description available)
pn  firmware-ipw2x00              <none>     (no description available)
pn  firmware-ivtv                 <none>     (no description available)
pn  firmware-iwlwifi              <none>     (no description available)
ii  firmware-linux                0.27       Binary firmware for various driver
ii  firmware-linux-nonfree        0.27       Binary firmware for various driver
pn  firmware-qlogic               <none>     (no description available)
pn  firmware-ralink               <none>     (no description available)
pn  xen-hypervisor                <none>     (no description available)

-- debconf information excluded



Reply to: