Your message dated Thu, 07 Oct 2010 03:18:52 +0100 with message-id <1286417932.2955.101.camel@localhost> and subject line Re: Bug#599368: NMI watchdog failed to create perf event on cpu0: ffffffa1 has caused the Debian Bug report #599368, regarding NMI watchdog failed to create perf event on cpu0: ffffffa1 to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 599368: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=599368 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: NMI watchdog failed to create perf event on cpu0: ffffffa1
- From: Michael Biebl <biebl@debian.org>
- Date: Thu, 07 Oct 2010 00:22:36 +0200
- Message-id: <[🔎] 20101006222236.2069.91581.reportbug@pluto.milchstrasse.xx>
Package: linux-2.6 Version: 2.6.36~rc6-1~experimental.1 Severity: minor File: /boot/vmlinuz-2.6.36-rc6-686 Hi, since the upgrade from rc5 to rc6, I get the following error message on the console during boot: NMI watchdog failed to create perf event on cpu0: ffffffa1 With a bit more context: [ 0.008303] Performance Events: [ 0.008306] no APIC, boot with the "lapic" boot parameter to force-enable it. [ 0.008309] no hardware sampling interrupt available. [ 0.008311] p6 PMU driver. [ 0.008319] ... version: 0 [ 0.008321] ... bit width: 32 [ 0.008324] ... generic registers: 2 [ 0.008326] ... value mask: 00000000ffffffff [ 0.008329] ... max period: 000000007fffffff [ 0.008331] ... fixed-purpose events: 0 [ 0.008334] ... event mask: 0000000000000003 [ 0.008815] SMP alternatives: switching to UP code [ 0.013737] Freeing SMP alternatives: 16k freed [ 0.013743] ACPI: Core revision 20100702 [ 0.021860] ACPI: setting ELCR to 0200 (from 0c20) [ 0.024070] weird, boot CPU (#0) not listed by the BIOS. [ 0.024073] SMP motherboard not detected. [ 0.024076] Local APIC not detected. Using dummy APIC emulation. [ 0.024078] SMP disabled [ 0.024189] NMI watchdog failed to create perf event on cpu0: ffffffa1 [ 0.028266] Brought up 1 CPUs [ 0.028270] Total of 1 processors activated (3189.83 BogoMIPS). -- Package-specific info: ** Version: Linux version 2.6.36-rc6-686 (Debian 2.6.36~rc6-1~experimental.1) (ben@decadent.org.uk) (gcc version 4.4.5 20100902 (prerelease) (Debian 4.4.4-13) ) #1 SMP Mon Oct 4 10:25:13 UTC 2010 ** Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.36-rc6-686 root=UUID=9a6d2bd2-58d1-4a75-baff-166b8637e3cc ro quiet ** Not tainted ** Kernel log: [ 4.301432] init[1]: systemd 10 running in system mode. (+PAM +LIBWRAP -AUDIT +SELINUX +SYSVINIT; debian) [ 4.557097] init[1]: Set hostname to <pluto>. [ 5.749668] init[1]: hostname.service lacks ExecStart setting. Refusing. [ 6.010413] init[1]: x11-common.service lacks ExecStart setting. Refusing. [ 17.410690] udev: starting version 161 [ 17.773447] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 17.789846] ACPI: AC Adapter [C134] (on-line) [ 17.841354] i801_smbus 0000:00:1f.3: PCI INT B -> Link[C0C3] -> GSI 10 (level, low) -> IRQ 10 [ 17.891393] intel_rng: FWH not detected [ 17.939770] ACPI: acpi_idle registered with cpuidle [ 17.939929] Marking TSC unstable due to TSC halts in idle [ 17.959641] Switching to clocksource acpi_pm [ 18.045347] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 18.118568] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 18.464425] ACPI: Battery Slot [C11F] (battery present) [ 18.512881] parport_pc 00:05: reported by Plug and Play ACPI [ 18.512934] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] [ 18.671247] NET: Registered protocol family 23 [ 18.721710] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x236eb3, caps: 0x904713/0x10008/0x0 [ 18.743763] Detected unconfigured Compaq x1000 family SMSC IrDA chip, pre-configuring device. [ 18.743768] Setting up Intel 82801 controller and SMSC device [ 18.743902] found SMC SuperIO Chip (devid=0x5a rev=00 base=0x002e): LPC47N227 [ 18.743918] smsc_superio_flat(): fir: 0x2f8, sir: 0x2e8, dma: 03, irq: 7, mode: 0x0e [ 18.743935] SMsC IrDA Controller found [ 18.743936] IrCC version 2.0, firport 0x2f8, sirport 0x2e8 dma=3, irq=7 [ 18.744042] No transceiver found. Defaulting to Fast pin select [ 18.760098] lib80211: common routines for IEEE802.11 drivers [ 18.760104] lib80211_crypt: registered algorithm 'NULL' [ 18.761327] IrDA: Registered device irda0 [ 18.776289] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6 [ 19.073755] yenta_cardbus 0000:02:04.0: CardBus bridge found [0e11:0860] [ 19.073778] yenta_cardbus 0000:02:04.0: Using CSCINT to route CSC interrupts to PCI [ 19.073782] yenta_cardbus 0000:02:04.0: Routing CardBus interrupts to PCI [ 19.073788] yenta_cardbus 0000:02:04.0: TI: mfunc 0x001c1112, devctl 0x44 [ 19.116501] Bluetooth: Core ver 2.15 [ 19.116534] NET: Registered protocol family 31 [ 19.116537] Bluetooth: HCI device and connection manager initialized [ 19.116541] Bluetooth: HCI socket layer initialized [ 19.163789] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 19.167829] usbcore: registered new interface driver btusb [ 19.191233] cfg80211: Calling CRDA to update world regulatory domain [ 19.230169] libipw: 802.11 data/management/control stack, git-1.1.13 [ 19.230173] libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com> [ 19.304638] yenta_cardbus 0000:02:04.0: ISA IRQ mask 0x0818, PCI irq 5 [ 19.304644] yenta_cardbus 0000:02:04.0: Socket status: 30000006 [ 19.304650] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06 [ 19.304664] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [io 0x2000-0x2fff] [ 19.304670] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x2fff: excluding 0x2000-0x20ff 0x2400-0x247f 0x2800-0x28ff 0x2c00-0x2cff [ 19.310170] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0x90000000-0x903fffff] [ 19.310175] pcmcia_socket pcmcia_socket0: cs: memory probe 0x90000000-0x903fffff: excluding 0x90000000-0x9003ffff 0x90100000-0x9013ffff 0x90200000-0x9023ffff 0x90300000-0x9033ffff [ 19.310196] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0x30000000-0x33ffffff pref] [ 19.310200] pcmcia_socket pcmcia_socket0: cs: memory probe 0x30000000-0x33ffffff: excluding 0x30000000-0x33ffffff [ 19.479013] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq [ 19.479018] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 19.479175] ipw2200 0000:02:02.0: PCI INT A -> Link[C0C5] -> GSI 5 (level, low) -> IRQ 5 [ 19.491678] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [ 19.694914] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels) [ 19.711021] udev: renamed network interface eth1 to wlan0 [ 20.183036] Adding 1020092k swap on /dev/sda5. Priority:-1 extents:1 across:1020092k [ 20.194309] EXT4-fs (sda6): re-mounted. Opts: (null) [ 20.233055] Intel ICH 0000:00:1f.5: PCI INT B -> Link[C0C3] -> GSI 10 (level, low) -> IRQ 10 [ 20.233131] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 20.704999] EXT4-fs (sda6): re-mounted. Opts: acl,user_xattr,errors=remount-ro [ 20.854096] PPP generic driver version 2.4.2 [ 20.887968] device-mapper: uevent: version 1.0.3 [ 20.890337] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com [ 21.156040] intel8x0_measure_ac97_clock: measured 55318 usecs (2665 samples) [ 21.156045] intel8x0: clocking to 48000 [ 21.156420] audit: name_count maxed, losing inode data: dev=00:05, inode=5877 [ 21.156462] audit: name_count maxed, losing inode data: dev=00:05, inode=4 [ 21.156468] audit: name_count maxed, losing inode data: dev=00:05, inode=4 [ 21.156501] audit: name_count maxed, losing inode data: dev=00:05, inode=4 [ 21.156507] audit: name_count maxed, losing inode data: dev=00:05, inode=4 [ 21.156567] audit: name_count maxed, losing inode data: dev=00:05, inode=4989 [ 21.156574] audit: name_count maxed, losing inode data: dev=00:05, inode=4989 [ 21.156618] audit: name_count maxed, losing inode data: dev=00:05, inode=4 [ 21.156624] audit: name_count maxed, losing inode data: dev=00:05, inode=4 [ 21.157826] Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[C0C3] -> GSI 10 (level, low) -> IRQ 10 [ 21.157852] Intel ICH Modem 0000:00:1f.6: setting latency timer to 64 [ 21.820353] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: acl,user_xattr [ 21.908315] fuse init (API version 7.15) [ 23.131148] lp0: using parport0 (interrupt-driven). [ 23.217953] ppdev: user-space parallel port driver [ 23.789359] eth0: link down [ 23.789628] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 23.832780] Bluetooth: L2CAP ver 2.15 [ 23.832784] Bluetooth: L2CAP socket layer initialized [ 23.865169] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 23.865173] Bluetooth: BNEP filters: protocol multicast [ 24.603017] Bluetooth: RFCOMM TTY layer initialized [ 24.603025] Bluetooth: RFCOMM socket layer initialized [ 24.603028] Bluetooth: RFCOMM ver 1.11 [ 24.617539] Bluetooth: SCO (Voice Link) ver 0.6 [ 24.617544] Bluetooth: SCO socket layer initialized [ 24.629562] lib80211_crypt: registered algorithm 'CCMP' [ 24.701560] padlock: VIA PadLock not detected. [ 24.854320] lib80211_crypt: registered algorithm 'TKIP' [ 33.344069] type=1305 audit(1286402950.422:20465): auid=4294967295 ses=4294967295 op="remove rule" key=(null) list=4 res=1 [ 33.344086] type=1305 audit(1286402950.422:20466): audit_enabled=0 old=1 auid=4294967295 ses=4294967295 res=1 [ 34.144025] wlan0: no IPv6 routers present ** Model information not available ** Loaded modules: Module Size Used by michael_mic 1470 4 arc4 1002 2 acpi_cpufreq 4547 0 ecb 1413 2 mperf 967 1 acpi_cpufreq lib80211_crypt_tkip 6623 1 cpufreq_userspace 1508 0 aes_i586 6828 1 cpufreq_stats 1934 0 aes_generic 25766 1 aes_i586 lib80211_crypt_ccmp 3577 1 sco 5855 2 rfcomm 24284 8 cpufreq_powersave 614 0 bnep 7506 2 l2cap 26340 16 rfcomm,bnep cpufreq_conservative 6190 0 ppdev 4475 0 lp 5806 0 fuse 47318 3 binfmt_misc 4982 1 dm_crypt 8927 0 dm_mod 49208 1 dm_crypt ppp_generic 16058 0 slhc 3494 1 ppp_generic snd_intel8x0m 8048 0 snd_intel8x0 19511 3 snd_ac97_codec 76621 2 snd_intel8x0m,snd_intel8x0 ac97_bus 722 1 snd_ac97_codec snd_pcm_oss 27474 0 snd_mixer_oss 10359 1 snd_pcm_oss snd_pcm 46944 5 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss ipw2200 107197 0 snd_seq_midi 3602 0 pcmcia 24418 0 snd_rawmidi 12629 1 snd_seq_midi libipw 18014 1 ipw2200 snd_seq_midi_event 3750 1 snd_seq_midi btusb 7851 2 snd_seq 34720 2 snd_seq_midi,snd_seq_midi_event cfg80211 98083 2 ipw2200,libipw yenta_socket 15472 0 snd_timer 12485 3 snd_pcm,snd_seq bluetooth 36946 9 sco,rfcomm,bnep,l2cap,btusb pcmcia_rsrc 7260 1 yenta_socket joydev 6976 0 snd_seq_device 3659 3 snd_seq_midi,snd_rawmidi,snd_seq pcmcia_core 8261 3 pcmcia,yenta_socket,pcmcia_rsrc rfkill 10822 4 cfg80211,bluetooth lib80211 2894 4 lib80211_crypt_tkip,lib80211_crypt_ccmp,ipw2200,libipw smsc_ircc2 8602 0 container 1853 0 irda 72076 1 smsc_ircc2 parport_pc 15625 1 snd 34129 14 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device crc_ccitt 1047 1 irda parport 21222 3 ppdev,lp,parport_pc tpm_tis 5313 0 shpchp 18111 0 pci_hotplug 16971 1 shpchp serio_raw 2902 0 soundcore 3426 1 snd tpm 7955 1 tpm_tis battery 4130 0 psmouse 38333 0 processor 22795 2 acpi_cpufreq tpm_bios 3573 1 tpm snd_page_alloc 5057 3 snd_intel8x0m,snd_intel8x0,snd_pcm evdev 5519 11 i2c_i801 6346 0 ac 1656 0 pcspkr 1219 0 rng_core 2298 0 autofs4 16557 6 ext4 233438 2 mbcache 3776 1 ext4 jbd2 48151 1 ext4 crc16 1035 2 l2cap,ext4 sg 15867 0 sd_mod 24194 5 sr_mod 11037 0 cdrom 25872 1 sr_mod crc_t10dif 1020 1 sd_mod ata_generic 1983 0 radeon 595990 2 ata_piix 17364 4 ttm 36490 1 radeon drm_kms_helper 19053 1 radeon libata 115536 2 ata_generic,ata_piix uhci_hcd 15722 0 ehci_hcd 27967 0 drm 121418 4 radeon,ttm,drm_kms_helper wbsd 8449 0 scsi_mod 128128 4 sg,sr_mod,sd_mod,libata usbcore 94906 4 btusb,uhci_hcd,ehci_hcd firewire_ohci 19087 0 i2c_algo_bit 3373 1 radeon 8139too 14604 0 mmc_core 44504 1 wbsd video 15297 0 8139cp 13204 0 i2c_core 12934 5 i2c_i801,radeon,drm_kms_helper,drm,i2c_algo_bit output 1212 1 video firewire_core 35444 1 firewire_ohci thermal 9458 0 thermal_sys 9328 3 processor,video,thermal mii 2714 2 8139too,8139cp button 3610 0 crc_itu_t 1039 1 firewire_core nls_base 4521 1 usbcore ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 82855PM Processor to I/O Controller [8086:3340] (rev 03) Subsystem: Compaq Computer Corporation Device [0e11:0860] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at b0000000 (32-bit, prefetchable) [size=256M] Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:01.0 PCI bridge [0604]: Intel Corporation 82855PM Processor to AGP Controller [8086:3341] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 128 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: 90400000-904fffff Prefetchable memory behind bridge: 98000000-9fffffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:1d.0 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 01) (prog-if 00 [UHCI]) Subsystem: Compaq Computer Corporation Device [0e11:0860] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 10 Region 4: I/O ports at 48c0 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 01) (prog-if 00 [UHCI]) Subsystem: Compaq Computer Corporation Device [0e11:0860] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 5 Region 4: I/O ports at 48e0 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [8086:24c7] (rev 01) (prog-if 00 [UHCI]) Subsystem: Compaq Computer Corporation Device [0e11:0860] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 5 Region 4: I/O ports at 4c00 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [8086:24cd] (rev 01) (prog-if 20 [EHCI]) Subsystem: Compaq Computer Corporation Device [0e11:0860] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 5 Region 0: Memory at a0000000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 81) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx- Latency: 0 Bus: primary=00, secondary=02, subordinate=06, sec-latency=32 I/O behind bridge: 00002000-00002fff Memory behind bridge: 90000000-903fffff Prefetchable memory behind bridge: 30000000-33ffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR+ BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:1f.0 ISA bridge [0601]: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge [8086:24cc] (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:1f.1 IDE interface [0101]: Intel Corporation 82801DBM (ICH4-M) IDE Controller [8086:24ca] (rev 01) (prog-if 8a [Master SecP PriP]) Subsystem: Compaq Computer Corporation Device [0e11:0860] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 5 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 4c40 [size=16] Region 5: Memory at 34000000 (32-bit, non-prefetchable) [size=1K] Kernel driver in use: ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller [8086:24c3] (rev 01) Subsystem: Compaq Computer Corporation Device [0e11:0860] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 10 Region 4: I/O ports at 4c20 [size=32] Kernel driver in use: i801_smbus 00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 01) Subsystem: Compaq Computer Corporation Device [0e11:0860] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 10 Region 0: I/O ports at 4000 [size=256] Region 1: I/O ports at 4880 [size=64] Region 2: Memory at a0200000 (32-bit, non-prefetchable) [size=512] Region 3: Memory at a0300000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: Intel ICH 00:1f.6 Modem [0703]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller [8086:24c6] (rev 01) (prog-if 00 [Generic]) Subsystem: Compaq Computer Corporation Device [0e11:0860] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 10 Region 0: I/O ports at 4400 [size=256] Region 1: I/O ports at 4800 [size=128] Capabilities: <access denied> Kernel driver in use: Intel ICH Modem 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon RV250 [Mobility FireGL 9000] [1002:4c66] (rev 01) (prog-if 00 [VGA controller]) Subsystem: Compaq Computer Corporation Device [0e11:0860] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 128 (2000ns min), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at 98000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at 3000 [size=256] Region 2: Memory at 90400000 (32-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at 90420000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: radeon 02:00.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev 80) (prog-if 10 [OHCI]) Subsystem: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 128 (8000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at 90200000 (32-bit, non-prefetchable) [size=2K] Region 1: I/O ports at 2400 [size=128] Capabilities: <access denied> Kernel driver in use: firewire_ohci 02:01.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 20) Subsystem: Compaq Computer Corporation Device [0e11:0860] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 128 (8000ns min, 16000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at 2000 [size=256] Region 1: Memory at 90300000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: 8139cp 02:02.0 Network controller [0280]: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection [8086:4220] (rev 05) Subsystem: Hewlett-Packard Company Device [103c:12f5] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 128 (750ns min, 6000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 5 Region 0: Memory at 90000000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ipw2200 02:04.0 CardBus bridge [0607]: ENE Technology Inc CB1410 Cardbus Controller [1524:1410] Subsystem: Compaq Computer Corporation Device [0e11:0860] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 5 Region 0: Memory at 90100000 (32-bit, non-prefetchable) [size=4K] Bus: primary=02, secondary=03, subordinate=06, sec-latency=176 Memory window 0: 30000000-33fff000 (prefetchable) Memory window 1: 38000000-3bfff000 I/O window 0: 00002800-000028ff I/O window 1: 00002c00-00002cff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus ** USB devices: Bus 004 Device 002: ID 049f:0086 Compaq Computer Corp. Bluetooth Device Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable'), (200, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.36-rc6-686 (SMP w/1 CPU core) Locale: LANG=de_DE.utf8, LC_CTYPE=de_DE.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.36-rc6-686 depends on: ii debconf [deb 1.5.36 Debian configuration management sy ii initramfs-to 0.98.4 tools for generating an initramfs ii linux-base 2.6.36~rc6-1~experimental.1 Linux image base package ii module-init- 3.12-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.36-rc6-686 recommends: ii firmware-linux-free 2.6.32-24 Binary firmware for various driver ii libc6-i686 2.11.2-6 Embedded GNU C Library: Shared lib Versions of packages linux-image-2.6.36-rc6-686 suggests: pn grub | lilo <none> (no description available) pn linux-doc-2.6.36 <none> (no description available) Versions of packages linux-image-2.6.36-rc6-686 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) ii firmware-ipw2x00 0.27 Binary firmware for Intel Pro Wire pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) ii firmware-linux 0.27 Binary firmware for various driver ii firmware-linux-nonfree 0.27 Binary firmware for various driver pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information: linux-image-2.6.36-rc6-686/postinst/missing-firmware-2.6.36-rc6-686: linux-image-2.6.36-rc6-686/postinst/depmod-error-initrd-2.6.36-rc6-686: false linux-image-2.6.36-rc6-686/prerm/removing-running-kernel-2.6.36-rc6-686: true linux-image-2.6.36-rc6-686/postinst/ignoring-do-bootloader-2.6.36-rc6-686:
--- End Message ---
--- Begin Message ---
- To: 599368-done@bugs.debian.org
- Subject: Re: Bug#599368: NMI watchdog failed to create perf event on cpu0: ffffffa1
- From: Ben Hutchings <ben@decadent.org.uk>
- Date: Thu, 07 Oct 2010 03:18:52 +0100
- Message-id: <1286417932.2955.101.camel@localhost>
- In-reply-to: <[🔎] 20101006222236.2069.91581.reportbug@pluto.milchstrasse.xx>
- References: <[🔎] 20101006222236.2069.91581.reportbug@pluto.milchstrasse.xx>
On Thu, 2010-10-07 at 00:22 +0200, Michael Biebl wrote: > Package: linux-2.6 > Version: 2.6.36~rc6-1~experimental.1 > Severity: minor > File: /boot/vmlinuz-2.6.36-rc6-686 > > Hi, > > since the upgrade from rc5 to rc6, I get the following error message on > the console during boot: > NMI watchdog failed to create perf event on cpu0: ffffffa1 [...] This error comes from the new code for hard lockup detection, which relies on using a CPU performance counter to trigger an NMI. The system you're using apparently doesn't have a suitable performance counter; this is not a bug. Ben. -- Ben Hutchings Once a job is fouled up, anything done to improve it makes it worse.Attachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---