Bug#599109: linux-image-2.6.32-5-amd64: X slow, then hangs after kernel emits 'irq 18: nobody cared' at boot
Package: linux-2.6
Version: 2.6.32-23
Severity: normal
After an upgrade of kernel 2.6.32-5-amd64 from 2.6.32-18 to 2.6.32-23,
the following message is emitted at bootup:
irq 18: nobody cared (try booting with the "irqpoll" option)
[<ffffffffa004e764>] (usb_hcd_irq+0x0/0x7e [usbcore])
[<ffffffffa004e764>] (usb_hcd_irq+0x0/0x7e [usbcore])
Disabling IRQ #18
Later, after starting X, X is slow to react, and mouse movement is jerky
during activity (starting an application). After a short while, kwin
disables compositing, and soon the entire session hangs, and the computer
does not react to keyboard or mouse. Even a console switch using chvt,
or a kill -9 of the X server have no effect. Other (e.g. command line)
applications do not seem to be affected though.
Booting with 'irqpoll' makes the problem disappear.
This problem seems the same as
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=543275 (which is for
2.6.30) I have tried using a different (== the other) USB port (port 3-1,
instead of 2-1)) for my mouse, but after some time, X still hangs.
When (un)plugging the mouse while the X session hangs, corresponding
'disconnect' and 'new USB device' messages do appear in kern.log.
I am including the following:
Kernel log (kernel version 2.6.32-18)
Kernel log (kernel version 2.6.32-23, booted without 'irqpoll')
Kernel log (kernel version 2.6.32-23, booted with 'irqpoll')
/proc/interrupts
Kernel log (kernel version 2.6.32-18):
------------------------------------------------------------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-18) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-2) ) #1 SMP Sat Jul 24 03:54:06 UTC 2010
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=/dev/mapper/system-debian--root ro quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003be80000 (usable)
[ 0.000000] BIOS-e820: 000000003be80000 - 000000003be8e000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003be8e000 - 000000003be90000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003be90000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x3be80 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-000000003be80000
[ 0.000000] 0000000000 - 003be00000 page 2M
[ 0.000000] 003be00000 - 003be80000 page 4k
[ 0.000000] kernel direct mapping tables up to 3be80000 @ 10000-13000
[ 0.000000] RAMDISK: 2c20f000 - 2cf1f388
[ 0.000000] ACPI: RSDP 00000000000f82f0 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 000000003be84a58 00054 (v01 GATEWA SYSTEM 06040000 INNA 00000000)
[ 0.000000] ACPI: FACP 000000003be8db95 000F4 (v03 ATI Herring 06040000 ATI 000F4240)
[ 0.000000] ACPI: DSDT 000000003be84aac 090E9 (v01 ATI SB600 06040000 MSFT 03000001)
[ 0.000000] ACPI: FACS 000000003be8ffc0 00040
[ 0.000000] ACPI: SLIC 000000003be8dcfd 00176 (v01 GATEWA SYSTEM 06040000 ANNI 00000001)
[ 0.000000] ACPI: SSDT 000000003be8de73 000D3 (v01 AMD POWERNOW 06040000 AMD 00000001)
[ 0.000000] ACPI: APIC 000000003be8df46 00046 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: MCFG 000000003be8df8c 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
[ 0.000000] ACPI: HPET 000000003be8dfc8 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000003be80000
[ 0.000000] Bootmem setup node 0 0000000000000000-000000003be80000
[ 0.000000] NODE_DATA [0000000000011000 - 0000000000018fff]
[ 0.000000] bootmap [0000000000019000 - 00000000000207cf] pages 8
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 003be80000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001680754] TEXT DATA BSS ==> [0001000000 - 0001680754]
[ 0.000000] #3 [002c20f000 - 002cf1f388] RAMDISK ==> [002c20f000 - 002cf1f388]
[ 0.000000] #4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000]
[ 0.000000] #5 [0001681000 - 000168120c] BRK ==> [0001681000 - 000168120c]
[ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] found SMP MP-table at [ffff8800000f8460] f8460
[ 0.000000] [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff880001c00000-ffff8800029fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x0003be80
[ 0.000000] On node 0 totalpages: 245261
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 102 pages reserved
[ 0.000000] DMA zone: 3823 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3299 pages used for memmap
[ 0.000000] DMA32 zone: 237981 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538310 base: 0xfed00000
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
[ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001800000 s90328 r8192 d24360 u2097152
[ 0.000000] pcpu-alloc: s90328 r8192 d24360 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 241804
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=/dev/mapper/system-debian--root ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ b0000000 size 32 MB
[ 0.000000] Aperture too small (32 MB) than (64 MB)
[ 0.000000] Memory: 946232k/981504k available (3051k kernel code, 460k absent, 34812k reserved, 1886k data, 588k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:256
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1596.082 MHz processor.
[ 0.008007] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.16 BogoMIPS (lpj=6384328)
[ 0.008043] Security Framework initialized
[ 0.008050] SELinux: Disabled at boot.
[ 0.008171] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.008972] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.012409] Mount-cache hash table entries: 256
[ 0.012605] Initializing cgroup subsys ns
[ 0.012610] Initializing cgroup subsys cpuacct
[ 0.012615] Initializing cgroup subsys devices
[ 0.012618] Initializing cgroup subsys freezer
[ 0.012621] Initializing cgroup subsys net_cls
[ 0.012653] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.012656] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.012659] CPU 0/0x0 -> Node 0
[ 0.012662] tseg: 003bf00000
[ 0.012666] mce: CPU supports 5 MCE banks
[ 0.012680] using C1E aware idle routine
[ 0.012682] Performance Events: AMD PMU driver.
[ 0.012688] ... version: 0
[ 0.012690] ... bit width: 48
[ 0.012692] ... generic registers: 4
[ 0.012695] ... value mask: 0000ffffffffffff
[ 0.012697] ... max period: 00007fffffffffff
[ 0.012699] ... fixed-purpose events: 0
[ 0.012702] ... event mask: 000000000000000f
[ 0.012716] SMP alternatives: switching to UP code
[ 0.020960] Freeing SMP alternatives: 28k freed
[ 0.020995] ACPI: Core revision 20090903
[ 0.036077] Setting APIC routing to flat
[ 0.036398] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.040001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.040001] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.040001] ..... (found apic 0 pin 0) ...
[ 0.083422] ....... works.
[ 0.083424] CPU0: AMD Athlon(tm) Processor 2650e stepping 02
[ 0.084001] Brought up 1 CPUs
[ 0.084001] Total of 1 processors activated (3192.16 BogoMIPS).
[ 0.084001] CPU0 attaching NULL sched-domain.
[ 0.084001] devtmpfs: initialized
[ 0.085120] regulator: core version 0.5
[ 0.085187] NET: Registered protocol family 16
[ 0.085332] node 0 link 0: io port [1000, fffff]
[ 0.085336] TOM: 0000000040000000 aka 1024M
[ 0.085340] node 0 link 0: mmio [fc100000, ffffffff]
[ 0.085344] node 0 link 0: mmio [fc000000, fc0fffff]
[ 0.085347] node 0 link 0: mmio [f8000000, fbffffff]
[ 0.085351] node 0 link 0: mmio [a0000, bffff]
[ 0.085354] node 0 link 0: mmio [f0000000, f7ffffff]
[ 0.085357] node 0 link 0: mmio [e0000000, efffffff]
[ 0.085361] node 0 link 0: mmio [40000000, dfffffff]
[ 0.085365] bus: [00,ff] on node 0 link 0
[ 0.085367] bus: 00 index 0 io port: [0, ffff]
[ 0.085370] bus: 00 index 1 mmio: [40000000, fcffffffff]
[ 0.085373] bus: 00 index 2 mmio: [a0000, bffff]
[ 0.085381] ACPI: bus type pci registered
[ 0.085472] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 12
[ 0.085476] PCI: MCFG area at e0000000 reserved in E820
[ 0.086018] PCI: Using MMCONFIG at e0000000 - e0cfffff
[ 0.086020] PCI: Using configuration type 1 for base access
[ 0.086570] bio: create slab <bio-0> at 0
[ 0.087378] ACPI: EC: Look up EC in DSDT
[ 0.091744] ACPI: BIOS _OSI(Linux) query ignored
[ 0.104071] ACPI: Interpreter enabled
[ 0.104078] ACPI: (supports S0 S3 S4 S5)
[ 0.104101] ACPI: Using IOAPIC for interrupt routing
[ 0.120976] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[ 0.121256] ACPI: No dock devices found.
[ 0.123047] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.123183] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.123187] pci 0000:00:04.0: PME# disabled
[ 0.123228] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.123232] pci 0000:00:05.0: PME# disabled
[ 0.124032] pci 0000:00:12.0: reg 10 io port: [0x8440-0x8447]
[ 0.124040] pci 0000:00:12.0: reg 14 io port: [0x8434-0x8437]
[ 0.124048] pci 0000:00:12.0: reg 18 io port: [0x8438-0x843f]
[ 0.124056] pci 0000:00:12.0: reg 1c io port: [0x8430-0x8433]
[ 0.124065] pci 0000:00:12.0: reg 20 io port: [0x8400-0x840f]
[ 0.124073] pci 0000:00:12.0: reg 24 32bit mmio: [0xfc609000-0xfc6093ff]
[ 0.124093] pci 0000:00:12.0: set SATA to AHCI mode
[ 0.124138] pci 0000:00:13.0: reg 10 32bit mmio: [0xfc404000-0xfc404fff]
[ 0.124201] pci 0000:00:13.1: reg 10 32bit mmio: [0xfc405000-0xfc405fff]
[ 0.124264] pci 0000:00:13.2: reg 10 32bit mmio: [0xfc406000-0xfc406fff]
[ 0.124326] pci 0000:00:13.3: reg 10 32bit mmio: [0xfc407000-0xfc407fff]
[ 0.124388] pci 0000:00:13.4: reg 10 32bit mmio: [0xfc408000-0xfc408fff]
[ 0.124470] pci 0000:00:13.5: reg 10 32bit mmio: [0xfc609400-0xfc6094ff]
[ 0.124526] pci 0000:00:13.5: supports D1 D2
[ 0.124529] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
[ 0.124534] pci 0000:00:13.5: PME# disabled
[ 0.124586] pci 0000:00:14.0: reg 10 io port: [0x8410-0x841f]
[ 0.124662] pci 0000:00:14.1: reg 10 io port: [0x1f0-0x1f7]
[ 0.124670] pci 0000:00:14.1: reg 14 io port: [0x3f4-0x3f7]
[ 0.124678] pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
[ 0.124686] pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
[ 0.124694] pci 0000:00:14.1: reg 20 io port: [0x8420-0x842f]
[ 0.124755] pci 0000:00:14.2: reg 10 64bit mmio: [0xfc400000-0xfc403fff]
[ 0.124801] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.124806] pci 0000:00:14.2: PME# disabled
[ 0.125031] pci 0000:01:05.0: reg 10 64bit mmio pref: [0xf8000000-0xfbffffff]
[ 0.125038] pci 0000:01:05.0: reg 18 64bit mmio: [0xfc100000-0xfc10ffff]
[ 0.125043] pci 0000:01:05.0: reg 20 io port: [0x9400-0x94ff]
[ 0.125048] pci 0000:01:05.0: reg 24 32bit mmio: [0xfc000000-0xfc0fffff]
[ 0.125061] pci 0000:01:05.0: supports D1 D2
[ 0.125081] pci 0000:00:01.0: bridge io port: [0x9000-0x9fff]
[ 0.125085] pci 0000:00:01.0: bridge 32bit mmio: [0xfc000000-0xfc1fffff]
[ 0.125090] pci 0000:00:01.0: bridge 64bit mmio pref: [0xf8000000-0xfbffffff]
[ 0.125144] pci 0000:02:00.0: reg 10 64bit mmio: [0xfc300000-0xfc303fff]
[ 0.125153] pci 0000:02:00.0: reg 18 io port: [0xa400-0xa4ff]
[ 0.125208] pci 0000:02:00.0: supports D1 D2
[ 0.125211] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.125216] pci 0000:02:00.0: PME# disabled
[ 0.132091] pci 0000:00:04.0: bridge io port: [0xa000-0xafff]
[ 0.132094] pci 0000:00:04.0: bridge 32bit mmio: [0xfc300000-0xfc3fffff]
[ 0.132144] pci 0000:05:00.0: reg 10 64bit mmio: [0xfc200000-0xfc20ffff]
[ 0.132223] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.132294] pci 0000:00:05.0: bridge 32bit mmio: [0xfc200000-0xfc2fffff]
[ 0.132358] pci 0000:00:14.4: transparent bridge
[ 0.132383] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.132525] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
[ 0.132606] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
[ 0.132727] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.132768] ACPI Warning for \_SB_.PCI0.P2P_._PRT: Return Package has no elements (empty) (20090903/nspredef-433)
[ 0.132782] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.138169] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[ 0.138309] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[ 0.138447] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[ 0.138586] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[ 0.138723] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[ 0.138861] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[ 0.139004] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[ 0.139142] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[ 0.139283] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.139287] vgaarb: loaded
[ 0.139391] PCI: Using ACPI for IRQ routing
[ 0.139605] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.139612] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.141038] Switching to clocksource tsc
[ 0.142489] pnp: PnP ACPI init
[ 0.142511] ACPI: bus type pnp registered
[ 0.147787] pnp: PnP ACPI: found 11 devices
[ 0.147789] ACPI: ACPI bus type pnp unregistered
[ 0.147804] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.147808] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.147817] system 00:06: ioport range 0x1080-0x1080 has been reserved
[ 0.147821] system 00:06: ioport range 0x220-0x22f has been reserved
[ 0.147825] system 00:06: ioport range 0x40b-0x40b has been reserved
[ 0.147829] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
[ 0.147833] system 00:06: ioport range 0x4d6-0x4d6 has been reserved
[ 0.147836] system 00:06: ioport range 0x530-0x537 has been reserved
[ 0.147840] system 00:06: ioport range 0xc00-0xc01 has been reserved
[ 0.147844] system 00:06: ioport range 0xc14-0xc14 has been reserved
[ 0.147848] system 00:06: ioport range 0xc50-0xc52 has been reserved
[ 0.147852] system 00:06: ioport range 0xc6c-0xc6c has been reserved
[ 0.147856] system 00:06: ioport range 0xc6f-0xc6f has been reserved
[ 0.147860] system 00:06: ioport range 0xcd0-0xcd1 has been reserved
[ 0.147864] system 00:06: ioport range 0xcd2-0xcd3 has been reserved
[ 0.147868] system 00:06: ioport range 0xcd4-0xcd5 has been reserved
[ 0.147871] system 00:06: ioport range 0xcd6-0xcd7 has been reserved
[ 0.147875] system 00:06: ioport range 0xcd8-0xcdf has been reserved
[ 0.147879] system 00:06: ioport range 0x8000-0x805f has been reserved
[ 0.147884] system 00:06: ioport range 0xf40-0xf47 has been reserved
[ 0.147888] system 00:06: ioport range 0x280-0x293 has been reserved
[ 0.147892] system 00:06: ioport range 0x87f-0x87f has been reserved
[ 0.147896] system 00:06: iomem range 0xff800000-0xffefffff has been reserved
[ 0.147907] system 00:07: iomem range 0xe0000-0xfffff could not be reserved
[ 0.147912] system 00:07: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.152740] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.152745] pci 0000:00:01.0: IO window: 0x9000-0x9fff
[ 0.152749] pci 0000:00:01.0: MEM window: 0xfc000000-0xfc1fffff
[ 0.152753] pci 0000:00:01.0: PREFETCH window: 0x000000f8000000-0x000000fbffffff
[ 0.152758] pci 0000:00:04.0: PCI bridge, secondary bus 0000:02
[ 0.152762] pci 0000:00:04.0: IO window: 0xa000-0xafff
[ 0.152766] pci 0000:00:04.0: MEM window: 0xfc300000-0xfc3fffff
[ 0.152769] pci 0000:00:04.0: PREFETCH window: disabled
[ 0.152774] pci 0000:00:05.0: PCI bridge, secondary bus 0000:05
[ 0.152776] pci 0000:00:05.0: IO window: disabled
[ 0.152780] pci 0000:00:05.0: MEM window: 0xfc200000-0xfc2fffff
[ 0.152783] pci 0000:00:05.0: PREFETCH window: disabled
[ 0.152788] pci 0000:00:14.4: PCI bridge, secondary bus 0000:0b
[ 0.152790] pci 0000:00:14.4: IO window: disabled
[ 0.152799] pci 0000:00:14.4: MEM window: disabled
[ 0.152804] pci 0000:00:14.4: PREFETCH window: disabled
[ 0.152821] pci 0000:00:04.0: setting latency timer to 64
[ 0.152827] pci 0000:00:05.0: setting latency timer to 64
[ 0.152837] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.152841] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.152844] pci_bus 0000:01: resource 0 io: [0x9000-0x9fff]
[ 0.152848] pci_bus 0000:01: resource 1 mem: [0xfc000000-0xfc1fffff]
[ 0.152851] pci_bus 0000:01: resource 2 pref mem [0xf8000000-0xfbffffff]
[ 0.152855] pci_bus 0000:02: resource 0 io: [0xa000-0xafff]
[ 0.152858] pci_bus 0000:02: resource 1 mem: [0xfc300000-0xfc3fffff]
[ 0.152862] pci_bus 0000:05: resource 1 mem: [0xfc200000-0xfc2fffff]
[ 0.152866] pci_bus 0000:0b: resource 3 io: [0x00-0xffff]
[ 0.152869] pci_bus 0000:0b: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.152917] NET: Registered protocol family 2
[ 0.153055] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.153796] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 0.155200] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.155864] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.155868] TCP reno registered
[ 0.155986] NET: Registered protocol family 1
[ 0.156104] pci 0000:01:05.0: Boot video device
[ 0.156173] Unpacking initramfs...
[ 0.579388] Freeing initrd memory: 13376k freed
[ 0.589872] audit: initializing netlink socket (disabled)
[ 0.589887] type=2000 audit(1285918240.586:1): initialized
[ 0.593907] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.596028] VFS: Disk quotas dquot_6.5.2
[ 0.596105] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.596214] msgmni has been set to 1874
[ 0.596430] alg: No test for stdrng (krng)
[ 0.596503] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.596506] io scheduler noop registered
[ 0.596509] io scheduler anticipatory registered
[ 0.596511] io scheduler deadline registered
[ 0.596558] io scheduler cfq registered (default)
[ 0.596742] alloc irq_desc for 24 on node 0
[ 0.596745] alloc kstat_irqs on node 0
[ 0.596756] pcieport 0000:00:04.0: irq 24 for MSI/MSI-X
[ 0.596763] pcieport 0000:00:04.0: setting latency timer to 64
[ 0.596875] alloc irq_desc for 25 on node 0
[ 0.596877] alloc kstat_irqs on node 0
[ 0.596884] pcieport 0000:00:05.0: irq 25 for MSI/MSI-X
[ 0.596889] pcieport 0000:00:05.0: setting latency timer to 64
[ 0.599101] Linux agpgart interface v0.103
[ 0.599160] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.599625] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.599698] PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.610136] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 0.616831] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.616838] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.616871] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.616897] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.616927] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.617073] mice: PS/2 mouse device common for all mice
[ 0.617518] rtc_cmos 00:04: RTC can wake from S4
[ 0.617571] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.617604] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.617619] cpuidle: using governor ladder
[ 0.617622] cpuidle: using governor menu
[ 0.617628] No iBFT detected.
[ 0.618071] TCP cubic registered
[ 0.618241] NET: Registered protocol family 10
[ 0.618907] lo: Disabled Privacy Extensions
[ 0.619305] Mobile IPv6
[ 0.619309] NET: Registered protocol family 17
[ 0.619422] PM: Resume from disk failed.
[ 0.619435] registered taskstats version 1
[ 0.619775] rtc_cmos 00:04: setting system clock to 2010-10-01 07:30:41 UTC (1285918241)
[ 0.619820] Initalizing network drop monitor service
[ 0.619854] Freeing unused kernel memory: 588k freed
[ 0.620259] Write protecting the kernel read-only data: 4204k
[ 0.639327] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 0.644832] udev: starting version 160
[ 0.979000] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.979015] ACPI: Thermal Zone [TZS0] (20 C)
[ 0.999669] usbcore: registered new interface driver usbfs
[ 0.999877] usbcore: registered new interface driver hub
[ 1.000077] usbcore: registered new device driver usb
[ 1.003706] SCSI subsystem initialized
[ 1.024736] thermal LNXTHERM:02: registered as thermal_zone1
[ 1.024751] ACPI: Thermal Zone [TZS1] (20 C)
[ 1.030402] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 1.030412] ACPI: Power Button [PWRB]
[ 1.030548] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[ 1.035892] ACPI: Lid Switch [LID0]
[ 1.036095] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
[ 1.036108] ACPI: Sleep Button [SLPB]
[ 1.036250] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 1.036255] ACPI: Power Button [PWRF]
[ 1.036490] sky2 driver version 1.25
[ 1.036593] alloc irq_desc for 16 on node 0
[ 1.036596] alloc kstat_irqs on node 0
[ 1.036606] sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.036620] sky2 0000:02:00.0: setting latency timer to 64
[ 1.036658] sky2 0000:02:00.0: Yukon-2 FE+ chip revision 0
[ 1.036735] alloc irq_desc for 26 on node 0
[ 1.036738] alloc kstat_irqs on node 0
[ 1.036750] sky2 0000:02:00.0: irq 26 for MSI/MSI-X
[ 1.037615] sky2 eth0: addr 00:1d:72:de:71:bb
[ 1.037860] libata version 3.00 loaded.
[ 1.058839] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.058916] alloc irq_desc for 19 on node 0
[ 1.058919] alloc kstat_irqs on node 0
[ 1.058930] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.058957] ehci_hcd 0000:00:13.5: EHCI Host Controller
[ 1.058989] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
[ 1.059029] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
[ 1.059044] ehci_hcd 0000:00:13.5: debug port 1
[ 1.059074] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfc609400
[ 1.086908] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
[ 1.086972] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.086975] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.086979] usb usb1: Product: EHCI Host Controller
[ 1.086982] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 1.086984] usb usb1: SerialNumber: 0000:00:13.5
[ 1.087164] usb usb1: configuration #1 chosen from 1 choice
[ 1.087249] hub 1-0:1.0: USB hub found
[ 1.087262] hub 1-0:1.0: 10 ports detected
[ 1.093555] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.093603] pata_atiixp 0000:00:14.1: setting latency timer to 64
[ 1.093692] scsi0 : pata_atiixp
[ 1.093916] scsi1 : pata_atiixp
[ 1.094872] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8420 irq 14
[ 1.094876] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8428 irq 15
[ 1.095254] ahci 0000:00:12.0: version 3.0
[ 1.095274] alloc irq_desc for 22 on node 0
[ 1.095277] alloc kstat_irqs on node 0
[ 1.095286] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.095325] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[ 1.095452] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 1.095457] ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio ccc
[ 1.096421] scsi2 : ahci
[ 1.096665] scsi3 : ahci
[ 1.096805] scsi4 : ahci
[ 1.096935] scsi5 : ahci
[ 1.097097] ata3: SATA max UDMA/133 abar m1024@0xfc609000 port 0xfc609100 irq 22
[ 1.097102] ata4: SATA max UDMA/133 abar m1024@0xfc609000 port 0xfc609180 irq 22
[ 1.097107] ata5: SATA max UDMA/133 abar m1024@0xfc609000 port 0xfc609200 irq 22
[ 1.097111] ata6: SATA max UDMA/133 abar m1024@0xfc609000 port 0xfc609280 irq 22
[ 1.098925] [drm] Initialized drm 1.1.0 20060810
[ 1.117467] acpi device:1f: registered as cooling_device0
[ 1.118073] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1d/LNXVIDEO:01/input/input6
[ 1.118083] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[ 1.188223] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.188300] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.188327] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.188353] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 1.188394] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfc404000
[ 1.244056] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.244060] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.244064] usb usb2: Product: OHCI Host Controller
[ 1.244066] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 1.244069] usb usb2: SerialNumber: 0000:00:13.0
[ 1.244236] usb usb2: configuration #1 chosen from 1 choice
[ 1.244314] hub 2-0:1.0: USB hub found
[ 1.244332] hub 2-0:1.0: 2 ports detected
[ 1.244445] alloc irq_desc for 17 on node 0
[ 1.244448] alloc kstat_irqs on node 0
[ 1.244457] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.244476] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.244487] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 1.244518] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfc405000
[ 1.300051] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.300055] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.300058] usb usb3: Product: OHCI Host Controller
[ 1.300061] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 1.300063] usb usb3: SerialNumber: 0000:00:13.1
[ 1.300237] usb usb3: configuration #1 chosen from 1 choice
[ 1.300315] hub 3-0:1.0: USB hub found
[ 1.300332] hub 3-0:1.0: 2 ports detected
[ 1.300451] alloc irq_desc for 18 on node 0
[ 1.300454] alloc kstat_irqs on node 0
[ 1.300462] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.300486] ohci_hcd 0000:00:13.2: OHCI Host Controller
[ 1.300498] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 1.300531] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfc406000
[ 1.356058] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.356062] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.356065] usb usb4: Product: OHCI Host Controller
[ 1.356068] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 1.356071] usb usb4: SerialNumber: 0000:00:13.2
[ 1.356215] usb usb4: configuration #1 chosen from 1 choice
[ 1.356295] hub 4-0:1.0: USB hub found
[ 1.356310] hub 4-0:1.0: 2 ports detected
[ 1.356416] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.356436] ohci_hcd 0000:00:13.3: OHCI Host Controller
[ 1.356447] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
[ 1.356468] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfc407000
[ 1.412050] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.412053] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.412057] usb usb5: Product: OHCI Host Controller
[ 1.412060] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 1.412062] usb usb5: SerialNumber: 0000:00:13.3
[ 1.412215] usb usb5: configuration #1 chosen from 1 choice
[ 1.412292] hub 5-0:1.0: USB hub found
[ 1.412308] hub 5-0:1.0: 2 ports detected
[ 1.412415] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.412437] ohci_hcd 0000:00:13.4: OHCI Host Controller
[ 1.412448] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
[ 1.412469] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfc408000
[ 1.416043] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.416100] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.470243] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.470246] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.470250] usb usb6: Product: OHCI Host Controller
[ 1.470252] usb usb6: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 1.470255] usb usb6: SerialNumber: 0000:00:13.4
[ 1.470345] usb usb6: configuration #1 chosen from 1 choice
[ 1.470382] hub 6-0:1.0: USB hub found
[ 1.470398] hub 6-0:1.0: 2 ports detected
[ 1.580012] ata3: softreset failed (device not ready)
[ 1.580061] ata3: applying SB600 PMP SRST workaround and retrying
[ 1.580082] usb 2-1: new low speed USB device using ohci_hcd and address 2
[ 1.692009] ata4: softreset failed (device not ready)
[ 1.692052] ata4: applying SB600 PMP SRST workaround and retrying
[ 1.742015] usb 2-1: New USB device found, idVendor=04b3, idProduct=310b
[ 1.742018] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.742204] usb 2-1: configuration #1 chosen from 1 choice
[ 1.744028] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.745633] ata3.00: ATA-8: ST9160310AS, 0303, max UDMA/133
[ 1.745639] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.745662] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 1.747482] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 1.747488] ata3.00: configured for UDMA/133
[ 1.747618] scsi 2:0:0:0: Direct-Access ATA ST9160310AS 0303 PQ: 0 ANSI: 5
[ 1.856025] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.888201] ata4.00: ATAPI: Slimtype DVD A DS8A2S, 6A11, max UDMA/100
[ 1.888228] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 1.930765] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 1.930769] ata4.00: configured for UDMA/100
[ 2.003481] scsi 3:0:0:0: CD-ROM Slimtype DVD A DS8A2S 6A11 PQ: 0 ANSI: 5
[ 2.039423] usbcore: registered new interface driver hiddev
[ 2.052194] input: HID 04b3:310b as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.0/input/input7
[ 2.052297] generic-usb 0003:04B3:310B.0001: input,hidraw0: USB HID v1.00 Mouse [HID 04b3:310b] on usb-0000:00:13.0-1/input0
[ 2.052330] usbcore: registered new interface driver usbhid
[ 2.052334] usbhid: v2.6:USB HID core driver
[ 2.053043] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.053105] sd 2:0:0:0: [sda] Write Protect is off
[ 2.053108] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.053134] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.053290] sda:sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda pop-up
[ 2.132698] Uniform CD-ROM driver Revision: 3.20
[ 2.133081] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 2.289165] sda1 sda2 sda3
[ 2.289780] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.319954] [drm] radeon kernel modesetting enabled.
[ 2.325647] radeon 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.329895] [drm] radeon: Initializing kernel modesetting.
[ 2.329973] [drm] register mmio base: 0xFC100000
[ 2.329976] [drm] register mmio size: 65536
[ 2.330168] ATOM BIOS: ATI
[ 2.330381] [drm] GPU reset succeed (RBBM_STATUS=0x10000140)
[ 2.330396] [drm] radeon: VRAM 64M
[ 2.330398] [drm] radeon: VRAM from 0x3C000000 to 0x3FFFFFFF
[ 2.330401] [drm] radeon: GTT 512M
[ 2.330403] [drm] radeon: GTT from 0x40000000 to 0x5FFFFFFF
[ 2.330435] alloc irq_desc for 27 on node 0
[ 2.330438] alloc kstat_irqs on node 0
[ 2.330451] radeon 0000:01:05.0: irq 27 for MSI/MSI-X
[ 2.330455] [drm] radeon: using MSI.
[ 2.330478] [drm] radeon: irq initialized.
[ 2.330609] [drm] Detected VRAM RAM=64M, BAR=64M
[ 2.330614] [drm] RAM width 128bits DDR
[ 2.331730] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 2.332214] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 2.332441] [TTM] Zone kernel: Available graphics memory: 480116 kiB.
[ 2.332463] [drm] radeon: 64M of VRAM memory ready
[ 2.332465] [drm] radeon: 512M of GTT memory ready.
[ 2.332480] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 2.336366] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[ 2.336391] [drm] radeon: cp idle (0x10000C03)
[ 2.336441] [drm] Loading RS690/RS740 Microcode
[ 2.336814] platform radeon_cp.0: firmware: requesting radeon/RS690_cp.bin
[ 2.342571] [drm] radeon: ring at 0x0000000040000000
[ 2.342592] [drm] ring test succeeded in 1 usecs
[ 2.342749] [drm] radeon: ib pool ready.
[ 2.342825] [drm] ib test succeeded in 0 usecs
[ 2.343021] [drm] Default TV standard: NTSC
[ 2.343063] [drm] Radeon Display Connectors
[ 2.343066] [drm] Connector 0:
[ 2.343068] [drm] VGA
[ 2.343071] [drm] DDC: 0x7e50 0x7e40 0x7e54 0x7e44 0x7e58 0x7e48 0x7e5c 0x7e4c
[ 2.343073] [drm] Encoders:
[ 2.343075] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 2.343078] [drm] Connector 1:
[ 2.343079] [drm] LVDS
[ 2.343082] [drm] DDC: 0x7e40 0x7e50 0x7e44 0x7e54 0x7e48 0x7e58 0x7e4c 0x7e5c
[ 2.343085] [drm] Encoders:
[ 2.343087] [drm] LCD1: INTERNAL_LVTM1
[ 2.343089] [drm] Connector 2:
[ 2.343090] [drm] S-video
[ 2.343092] [drm] Encoders:
[ 2.343094] [drm] TV1: INTERNAL_KLDSCP_DAC1
[ 2.888764] [drm] fb mappable at 0xF8040000
[ 2.888768] [drm] vram apper at 0xF8000000
[ 2.888770] [drm] size 4096000
[ 2.888772] [drm] fb depth is 24
[ 2.888774] [drm] pitch is 5120
[ 3.221705] Console: switching to colour frame buffer device 160x50
[ 3.231406] fb0: radeondrmfb frame buffer device
[ 3.231408] registered panic notifier
[ 3.231644] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:05.0 on minor 0
[ 3.306608] md: linear personality registered for level -1
[ 3.310339] md: multipath personality registered for level -4
[ 3.313542] md: raid0 personality registered for level 0
[ 3.318836] md: raid1 personality registered for level 1
[ 3.321843] async_tx: api initialized (async)
[ 3.322999] xor: automatically using best checksumming function: generic_sse
[ 3.340006] generic_sse: 4928.000 MB/sec
[ 3.340009] xor: using function: generic_sse (4928.000 MB/sec)
[ 3.408040] raid6: int64x1 1449 MB/s
[ 3.476023] raid6: int64x2 1888 MB/s
[ 3.544009] raid6: int64x4 1470 MB/s
[ 3.612008] raid6: int64x8 1318 MB/s
[ 3.680054] raid6: sse2x1 828 MB/s
[ 3.748003] raid6: sse2x2 1181 MB/s
[ 3.816015] raid6: sse2x4 1706 MB/s
[ 3.816017] raid6: using algorithm sse2x4 (1706 MB/s)
[ 3.824667] md: raid6 personality registered for level 6
[ 3.824671] md: raid5 personality registered for level 5
[ 3.824674] md: raid4 personality registered for level 4
[ 3.834149] md: raid10 personality registered for level 10
[ 4.093235] device-mapper: uevent: version 1.0.3
[ 4.093868] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 6.268114] PM: Starting manual resume from disk
[ 6.268119] PM: Resume from partition 253:1
[ 6.268122] PM: Checking hibernation image.
[ 6.268457] PM: Error -22 checking image file
[ 6.268459] PM: Resume from disk failed.
[ 6.305709] kjournald starting. Commit interval 5 seconds
[ 6.305721] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.796681] udev: starting version 160
[ 8.402588] Marking TSC unstable due to TSC halts in idle
[ 8.403927] processor LNXCPU:00: registered as cooling_device1
[ 8.407780] ACPI: WMI: Mapper loaded
[ 8.408577] ACPI: AC Adapter [ADP1] (on-line)
[ 8.410156] Switching to clocksource hpet
[ 8.410198] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 8.430515] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8410, revision 0
[ 8.449977] ACPI: Battery Slot [BAT0] (battery absent)
[ 8.452605] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 8.620772] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.941434] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 8.994941] cfg80211: Using static regulatory domain info
[ 8.994945] cfg80211: Regulatory domain: US
[ 8.994948] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 8.994952] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 8.994955] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 8.994959] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 8.994963] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 8.994966] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 8.994969] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 8.995331] cfg80211: Calling CRDA for country: US
[ 9.028451] EDAC MC: Ver: 2.1.0 Jul 24 2010
[ 9.033244] EDAC amd64_edac: Ver: 3.2.0 Jul 24 2010
[ 9.033328] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
[ 9.033335] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 9.033337] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 9.033339] (Note that use of the override may cause unknown side effects.)
[ 9.033357] amd64_edac: probe of 0000:00:18.2 failed with error -22
[ 9.238661] ath5k 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 9.238672] ath5k 0000:05:00.0: setting latency timer to 64
[ 9.238731] ath5k 0000:05:00.0: registered as 'phy0'
[ 9.742638] ath: EEPROM regdomain: 0x65
[ 9.742642] ath: EEPROM indicates we should expect a direct regpair map
[ 9.742648] ath: Country alpha2 being used: 00
[ 9.742650] ath: Regpair used: 0x65
[ 9.984263] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04711/0xa04000/0x0
[ 9.991370] phy0: Selected rate control algorithm 'minstrel'
[ 9.992381] Registered led device: ath5k-phy0::rx
[ 9.992405] Registered led device: ath5k-phy0::tx
[ 9.992409] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 10.041881] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input9
[ 10.735627] HDA Intel 0000:00:14.2: power state changed by ACPI to D0
[ 10.735677] HDA Intel 0000:00:14.2: power state changed by ACPI to D0
[ 10.735688] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 10.823270] hda_codec: ALC268: BIOS auto-probing.
[ 10.823857] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input10
[ 11.173672] Adding 1048568k swap on /dev/mapper/system-debian--swap. Priority:-1 extents:1 across:1048568k
[ 11.299527] EXT3 FS on dm-0, internal journal
[ 11.460544] loop: module loaded
[ 11.615513] powernow-k8: Found 1 AMD Athlon(tm) Processor 2650e processors (1 cpu cores) (version 2.20.00)
[ 11.615561] powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x16
[ 11.615564] powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x16
[ 19.179162] Adding 1048568k swap on /dev/mapper/system-debian--swap2. Priority:256 extents:1 across:1048568k
[ 22.371086] kjournald starting. Commit interval 5 seconds
[ 22.371112] EXT3-fs: mounted filesystem with ordered data mode.
[ 22.411341] kjournald starting. Commit interval 5 seconds
[ 22.411746] EXT3 FS on dm-17, internal journal
[ 22.411755] EXT3-fs: mounted filesystem with ordered data mode.
[ 22.447243] kjournald starting. Commit interval 5 seconds
[ 22.447677] EXT3 FS on dm-18, internal journal
[ 22.447688] EXT3-fs: mounted filesystem with ordered data mode.
[ 22.513277] kjournald starting. Commit interval 5 seconds
[ 22.513714] EXT3 FS on dm-20, internal journal
[ 22.513722] EXT3-fs: mounted filesystem with ordered data mode.
[ 22.600941] kjournald starting. Commit interval 5 seconds
[ 22.601649] EXT3 FS on sda1, internal journal
[ 22.601657] EXT3-fs: mounted filesystem with ordered data mode.
[ 22.651572] kjournald starting. Commit interval 5 seconds
[ 22.652808] EXT3 FS on dm-21, internal journal
[ 22.652816] EXT3-fs: mounted filesystem with ordered data mode.
[ 23.244135] kjournald starting. Commit interval 5 seconds
[ 23.244571] EXT3 FS on dm-9, internal journal
[ 23.244583] EXT3-fs: mounted filesystem with ordered data mode.
[ 25.393460] Bridge firewalling registered
[ 25.424716] device eth0 entered promiscuous mode
[ 25.432759] sky2 eth0: enabling interface
[ 25.440618] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 26.941309] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 26.941861] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 26.941957] br0: port 1(eth0) entering learning state
[ 36.252025] br0: no IPv6 routers present
[ 37.392017] eth0: no IPv6 routers present
[ 41.940022] br0: port 1(eth0) entering forwarding state
[ 48.113051] RPC: Registered udp transport module.
[ 48.113060] RPC: Registered tcp transport module.
[ 48.113065] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 48.193503] Slow work thread pool: Starting up
[ 48.193629] Slow work thread pool: Ready
[ 48.193784] FS-Cache: Loaded
[ 48.299022] FS-Cache: Netfs 'nfs' registered for caching
[ 48.382125] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 49.040369] fuse init (API version 7.13)
[ 56.462782] lp: driver loaded but no devices found
[ 56.514443] ppdev: user-space parallel port driver
[ 57.816046] br1: no IPv6 routers present
[ 61.929399] svc: failed to register lockdv1 RPC service (errno 97).
[ 61.932505] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 61.956594] NFSD: starting 90-second grace period
[ 65.062420] kvm: Nested Virtualization enabled
[ 75.581130] CPUFREQ: Per core ondemand sysfs interface is deprecated - ignore_nice_load
[ 77.730169] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 119.941207] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
------------------------------------------------------------
Kernel log (kernel version 2.6.32-23, booted without 'irqpoll'):
Note that the call trace (at time 3.388546) is from a different application each time
------------------------------------------------------------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-23) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-3) ) #1 SMP Sat Sep 18 03:26:20 UTC 2010
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=/dev/mapper/system-debian--root ro quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003be80000 (usable)
[ 0.000000] BIOS-e820: 000000003be80000 - 000000003be8e000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003be8e000 - 000000003be90000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003be90000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x3be80 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-000000003be80000
[ 0.000000] 0000000000 - 003be00000 page 2M
[ 0.000000] 003be00000 - 003be80000 page 4k
[ 0.000000] kernel direct mapping tables up to 3be80000 @ 10000-13000
[ 0.000000] RAMDISK: 2c20b000 - 2cf1f06b
[ 0.000000] ACPI: RSDP 00000000000f82f0 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 000000003be84a58 00054 (v01 GATEWA SYSTEM 06040000 INNA 00000000)
[ 0.000000] ACPI: FACP 000000003be8db95 000F4 (v03 ATI Herring 06040000 ATI 000F4240)
[ 0.000000] ACPI: DSDT 000000003be84aac 090E9 (v01 ATI SB600 06040000 MSFT 03000001)
[ 0.000000] ACPI: FACS 000000003be8ffc0 00040
[ 0.000000] ACPI: SLIC 000000003be8dcfd 00176 (v01 GATEWA SYSTEM 06040000 ANNI 00000001)
[ 0.000000] ACPI: SSDT 000000003be8de73 000D3 (v01 AMD POWERNOW 06040000 AMD 00000001)
[ 0.000000] ACPI: APIC 000000003be8df46 00046 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: MCFG 000000003be8df8c 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
[ 0.000000] ACPI: HPET 000000003be8dfc8 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000003be80000
[ 0.000000] Bootmem setup node 0 0000000000000000-000000003be80000
[ 0.000000] NODE_DATA [0000000000011000 - 0000000000018fff]
[ 0.000000] bootmap [0000000000019000 - 00000000000207cf] pages 8
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 003be80000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001682414] TEXT DATA BSS ==> [0001000000 - 0001682414]
[ 0.000000] #3 [002c20b000 - 002cf1f06b] RAMDISK ==> [002c20b000 - 002cf1f06b]
[ 0.000000] #4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000]
[ 0.000000] #5 [0001683000 - 000168320c] BRK ==> [0001683000 - 000168320c]
[ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] found SMP MP-table at [ffff8800000f8460] f8460
[ 0.000000] [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff880001c00000-ffff8800029fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x0003be80
[ 0.000000] On node 0 totalpages: 245261
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 102 pages reserved
[ 0.000000] DMA zone: 3823 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3299 pages used for memmap
[ 0.000000] DMA32 zone: 237981 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538301 base: 0xfed00000
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
[ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001800000 s90328 r8192 d24360 u2097152
[ 0.000000] pcpu-alloc: s90328 r8192 d24360 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 241804
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=/dev/mapper/system-debian--root ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ b0000000 size 32 MB
[ 0.000000] Aperture too small (32 MB) than (64 MB)
[ 0.000000] Memory: 946208k/981504k available (3055k kernel code, 460k absent, 34836k reserved, 1891k data, 584k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:256
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1596.191 MHz processor.
[ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.38 BogoMIPS (lpj=6384764)
[ 0.004042] Security Framework initialized
[ 0.004049] SELinux: Disabled at boot.
[ 0.004167] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.004970] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.008403] Mount-cache hash table entries: 256
[ 0.008601] Initializing cgroup subsys ns
[ 0.008606] Initializing cgroup subsys cpuacct
[ 0.008611] Initializing cgroup subsys devices
[ 0.008614] Initializing cgroup subsys freezer
[ 0.008617] Initializing cgroup subsys net_cls
[ 0.008653] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.008656] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.008659] CPU 0/0x0 -> Node 0
[ 0.008662] tseg: 003bf00000
[ 0.008666] mce: CPU supports 5 MCE banks
[ 0.008680] using C1E aware idle routine
[ 0.008683] Performance Events: AMD PMU driver.
[ 0.008688] ... version: 0
[ 0.008691] ... bit width: 48
[ 0.008693] ... generic registers: 4
[ 0.008695] ... value mask: 0000ffffffffffff
[ 0.008698] ... max period: 00007fffffffffff
[ 0.008700] ... fixed-purpose events: 0
[ 0.008702] ... event mask: 000000000000000f
[ 0.008717] SMP alternatives: switching to UP code
[ 0.016451] Freeing SMP alternatives: 28k freed
[ 0.016485] ACPI: Core revision 20090903
[ 0.028075] Setting APIC routing to flat
[ 0.032212] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.036001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.036001] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.036001] ..... (found apic 0 pin 0) ...
[ 0.079651] ....... works.
[ 0.079653] CPU0: AMD Athlon(tm) Processor 2650e stepping 02
[ 0.080001] Brought up 1 CPUs
[ 0.080001] Total of 1 processors activated (3192.38 BogoMIPS).
[ 0.080001] CPU0 attaching NULL sched-domain.
[ 0.080001] devtmpfs: initialized
[ 0.081099] regulator: core version 0.5
[ 0.081164] NET: Registered protocol family 16
[ 0.081312] node 0 link 0: io port [1000, fffff]
[ 0.081316] TOM: 0000000040000000 aka 1024M
[ 0.081319] node 0 link 0: mmio [fc100000, ffffffff]
[ 0.081323] node 0 link 0: mmio [fc000000, fc0fffff]
[ 0.081327] node 0 link 0: mmio [f8000000, fbffffff]
[ 0.081330] node 0 link 0: mmio [a0000, bffff]
[ 0.081334] node 0 link 0: mmio [f0000000, f7ffffff]
[ 0.081337] node 0 link 0: mmio [e0000000, efffffff]
[ 0.081340] node 0 link 0: mmio [40000000, dfffffff]
[ 0.081344] bus: [00,ff] on node 0 link 0
[ 0.081347] bus: 00 index 0 io port: [0, ffff]
[ 0.081350] bus: 00 index 1 mmio: [40000000, fcffffffff]
[ 0.081353] bus: 00 index 2 mmio: [a0000, bffff]
[ 0.081361] ACPI: bus type pci registered
[ 0.081452] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 12
[ 0.081455] PCI: MCFG area at e0000000 reserved in E820
[ 0.081998] PCI: Using MMCONFIG at e0000000 - e0cfffff
[ 0.082001] PCI: Using configuration type 1 for base access
[ 0.082543] bio: create slab <bio-0> at 0
[ 0.083242] ACPI: EC: Look up EC in DSDT
[ 0.087642] ACPI: BIOS _OSI(Linux) query ignored
[ 0.096072] ACPI: Interpreter enabled
[ 0.096075] ACPI: (supports S0 S3 S4 S5)
[ 0.096098] ACPI: Using IOAPIC for interrupt routing
[ 0.112287] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[ 0.112570] ACPI: No dock devices found.
[ 0.114370] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.114505] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.114510] pci 0000:00:04.0: PME# disabled
[ 0.114550] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.114553] pci 0000:00:05.0: PME# disabled
[ 0.114614] pci 0000:00:12.0: reg 10 io port: [0x8440-0x8447]
[ 0.114622] pci 0000:00:12.0: reg 14 io port: [0x8434-0x8437]
[ 0.114630] pci 0000:00:12.0: reg 18 io port: [0x8438-0x843f]
[ 0.114639] pci 0000:00:12.0: reg 1c io port: [0x8430-0x8433]
[ 0.114647] pci 0000:00:12.0: reg 20 io port: [0x8400-0x840f]
[ 0.114656] pci 0000:00:12.0: reg 24 32bit mmio: [0xfc609000-0xfc6093ff]
[ 0.114676] pci 0000:00:12.0: set SATA to AHCI mode
[ 0.114721] pci 0000:00:13.0: reg 10 32bit mmio: [0xfc404000-0xfc404fff]
[ 0.114785] pci 0000:00:13.1: reg 10 32bit mmio: [0xfc405000-0xfc405fff]
[ 0.114848] pci 0000:00:13.2: reg 10 32bit mmio: [0xfc406000-0xfc406fff]
[ 0.114911] pci 0000:00:13.3: reg 10 32bit mmio: [0xfc407000-0xfc407fff]
[ 0.114974] pci 0000:00:13.4: reg 10 32bit mmio: [0xfc408000-0xfc408fff]
[ 0.115056] pci 0000:00:13.5: reg 10 32bit mmio: [0xfc609400-0xfc6094ff]
[ 0.115113] pci 0000:00:13.5: supports D1 D2
[ 0.115116] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
[ 0.115122] pci 0000:00:13.5: PME# disabled
[ 0.115174] pci 0000:00:14.0: reg 10 io port: [0x8410-0x841f]
[ 0.115250] pci 0000:00:14.1: reg 10 io port: [0x1f0-0x1f7]
[ 0.115259] pci 0000:00:14.1: reg 14 io port: [0x3f4-0x3f7]
[ 0.115267] pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
[ 0.115275] pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
[ 0.115283] pci 0000:00:14.1: reg 20 io port: [0x8420-0x842f]
[ 0.115344] pci 0000:00:14.2: reg 10 64bit mmio: [0xfc400000-0xfc403fff]
[ 0.115391] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.115396] pci 0000:00:14.2: PME# disabled
[ 0.115621] pci 0000:01:05.0: reg 10 64bit mmio pref: [0xf8000000-0xfbffffff]
[ 0.115628] pci 0000:01:05.0: reg 18 64bit mmio: [0xfc100000-0xfc10ffff]
[ 0.115634] pci 0000:01:05.0: reg 20 io port: [0x9400-0x94ff]
[ 0.115639] pci 0000:01:05.0: reg 24 32bit mmio: [0xfc000000-0xfc0fffff]
[ 0.115652] pci 0000:01:05.0: supports D1 D2
[ 0.115672] pci 0000:00:01.0: bridge io port: [0x9000-0x9fff]
[ 0.115677] pci 0000:00:01.0: bridge 32bit mmio: [0xfc000000-0xfc1fffff]
[ 0.115682] pci 0000:00:01.0: bridge 64bit mmio pref: [0xf8000000-0xfbffffff]
[ 0.115736] pci 0000:02:00.0: reg 10 64bit mmio: [0xfc300000-0xfc303fff]
[ 0.115745] pci 0000:02:00.0: reg 18 io port: [0xa400-0xa4ff]
[ 0.115800] pci 0000:02:00.0: supports D1 D2
[ 0.115803] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.115808] pci 0000:02:00.0: PME# disabled
[ 0.120091] pci 0000:00:04.0: bridge io port: [0xa000-0xafff]
[ 0.120095] pci 0000:00:04.0: bridge 32bit mmio: [0xfc300000-0xfc3fffff]
[ 0.120145] pci 0000:05:00.0: reg 10 64bit mmio: [0xfc200000-0xfc20ffff]
[ 0.120224] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.120297] pci 0000:00:05.0: bridge 32bit mmio: [0xfc200000-0xfc2fffff]
[ 0.120361] pci 0000:00:14.4: transparent bridge
[ 0.120386] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.120533] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
[ 0.120615] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
[ 0.120734] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.120775] ACPI Warning for \_SB_.PCI0.P2P_._PRT: Return Package has no elements (empty) (20090903/nspredef-433)
[ 0.120789] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.126106] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[ 0.126250] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[ 0.126391] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[ 0.126534] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[ 0.126675] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[ 0.126817] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[ 0.126963] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[ 0.127104] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[ 0.127245] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.127249] vgaarb: loaded
[ 0.127355] PCI: Using ACPI for IRQ routing
[ 0.127575] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.127581] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.129041] Switching to clocksource tsc
[ 0.130449] pnp: PnP ACPI init
[ 0.130472] ACPI: bus type pnp registered
[ 0.135174] pnp: PnP ACPI: found 11 devices
[ 0.135177] ACPI: ACPI bus type pnp unregistered
[ 0.135191] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.135195] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.135205] system 00:06: ioport range 0x1080-0x1080 has been reserved
[ 0.135209] system 00:06: ioport range 0x220-0x22f has been reserved
[ 0.135213] system 00:06: ioport range 0x40b-0x40b has been reserved
[ 0.135217] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
[ 0.135221] system 00:06: ioport range 0x4d6-0x4d6 has been reserved
[ 0.135225] system 00:06: ioport range 0x530-0x537 has been reserved
[ 0.135229] system 00:06: ioport range 0xc00-0xc01 has been reserved
[ 0.135232] system 00:06: ioport range 0xc14-0xc14 has been reserved
[ 0.135236] system 00:06: ioport range 0xc50-0xc52 has been reserved
[ 0.135240] system 00:06: ioport range 0xc6c-0xc6c has been reserved
[ 0.135244] system 00:06: ioport range 0xc6f-0xc6f has been reserved
[ 0.135248] system 00:06: ioport range 0xcd0-0xcd1 has been reserved
[ 0.135252] system 00:06: ioport range 0xcd2-0xcd3 has been reserved
[ 0.135256] system 00:06: ioport range 0xcd4-0xcd5 has been reserved
[ 0.135260] system 00:06: ioport range 0xcd6-0xcd7 has been reserved
[ 0.135264] system 00:06: ioport range 0xcd8-0xcdf has been reserved
[ 0.135268] system 00:06: ioport range 0x8000-0x805f has been reserved
[ 0.135273] system 00:06: ioport range 0xf40-0xf47 has been reserved
[ 0.135277] system 00:06: ioport range 0x280-0x293 has been reserved
[ 0.135281] system 00:06: ioport range 0x87f-0x87f has been reserved
[ 0.135285] system 00:06: iomem range 0xff800000-0xffefffff has been reserved
[ 0.135299] system 00:07: iomem range 0xe0000-0xfffff could not be reserved
[ 0.135303] system 00:07: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.140123] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.140128] pci 0000:00:01.0: IO window: 0x9000-0x9fff
[ 0.140132] pci 0000:00:01.0: MEM window: 0xfc000000-0xfc1fffff
[ 0.140137] pci 0000:00:01.0: PREFETCH window: 0x000000f8000000-0x000000fbffffff
[ 0.140142] pci 0000:00:04.0: PCI bridge, secondary bus 0000:02
[ 0.140146] pci 0000:00:04.0: IO window: 0xa000-0xafff
[ 0.140150] pci 0000:00:04.0: MEM window: 0xfc300000-0xfc3fffff
[ 0.140153] pci 0000:00:04.0: PREFETCH window: disabled
[ 0.140158] pci 0000:00:05.0: PCI bridge, secondary bus 0000:05
[ 0.140160] pci 0000:00:05.0: IO window: disabled
[ 0.140164] pci 0000:00:05.0: MEM window: 0xfc200000-0xfc2fffff
[ 0.140168] pci 0000:00:05.0: PREFETCH window: disabled
[ 0.140172] pci 0000:00:14.4: PCI bridge, secondary bus 0000:0b
[ 0.140175] pci 0000:00:14.4: IO window: disabled
[ 0.140184] pci 0000:00:14.4: MEM window: disabled
[ 0.140189] pci 0000:00:14.4: PREFETCH window: disabled
[ 0.140206] pci 0000:00:04.0: setting latency timer to 64
[ 0.140213] pci 0000:00:05.0: setting latency timer to 64
[ 0.140223] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.140227] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.140231] pci_bus 0000:01: resource 0 io: [0x9000-0x9fff]
[ 0.140234] pci_bus 0000:01: resource 1 mem: [0xfc000000-0xfc1fffff]
[ 0.140237] pci_bus 0000:01: resource 2 pref mem [0xf8000000-0xfbffffff]
[ 0.140241] pci_bus 0000:02: resource 0 io: [0xa000-0xafff]
[ 0.140244] pci_bus 0000:02: resource 1 mem: [0xfc300000-0xfc3fffff]
[ 0.140248] pci_bus 0000:05: resource 1 mem: [0xfc200000-0xfc2fffff]
[ 0.140252] pci_bus 0000:0b: resource 3 io: [0x00-0xffff]
[ 0.140255] pci_bus 0000:0b: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.140303] NET: Registered protocol family 2
[ 0.140434] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.141157] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 0.142563] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.143248] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.143252] TCP reno registered
[ 0.143368] NET: Registered protocol family 1
[ 0.143482] pci 0000:01:05.0: Boot video device
[ 0.143552] Unpacking initramfs...
[ 0.567949] Freeing initrd memory: 13392k freed
[ 0.578444] audit: initializing netlink socket (disabled)
[ 0.578460] type=2000 audit(1286186042.578:1): initialized
[ 0.582473] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.584469] VFS: Disk quotas dquot_6.5.2
[ 0.584542] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.584654] msgmni has been set to 1874
[ 0.584865] alg: No test for stdrng (krng)
[ 0.584941] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.584945] io scheduler noop registered
[ 0.584947] io scheduler anticipatory registered
[ 0.584950] io scheduler deadline registered
[ 0.584996] io scheduler cfq registered (default)
[ 0.585179] alloc irq_desc for 24 on node 0
[ 0.585182] alloc kstat_irqs on node 0
[ 0.585194] pcieport 0000:00:04.0: irq 24 for MSI/MSI-X
[ 0.585201] pcieport 0000:00:04.0: setting latency timer to 64
[ 0.585309] alloc irq_desc for 25 on node 0
[ 0.585312] alloc kstat_irqs on node 0
[ 0.585317] pcieport 0000:00:05.0: irq 25 for MSI/MSI-X
[ 0.585323] pcieport 0000:00:05.0: setting latency timer to 64
[ 0.587577] Linux agpgart interface v0.103
[ 0.587636] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.588074] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.588148] PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.599953] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 0.610032] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.610039] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.610074] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.610102] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.610135] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.610302] mice: PS/2 mouse device common for all mice
[ 0.611021] rtc_cmos 00:04: RTC can wake from S4
[ 0.611074] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.611107] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.611122] cpuidle: using governor ladder
[ 0.611125] cpuidle: using governor menu
[ 0.611130] No iBFT detected.
[ 0.611549] TCP cubic registered
[ 0.611714] NET: Registered protocol family 10
[ 0.612344] lo: Disabled Privacy Extensions
[ 0.612723] Mobile IPv6
[ 0.612727] NET: Registered protocol family 17
[ 0.612841] PM: Resume from disk failed.
[ 0.612854] registered taskstats version 1
[ 0.613200] rtc_cmos 00:04: setting system clock to 2010-10-04 09:54:04 UTC (1286186044)
[ 0.613247] Initalizing network drop monitor service
[ 0.613282] Freeing unused kernel memory: 584k freed
[ 0.613684] Write protecting the kernel read-only data: 4208k
[ 0.636273] udev: starting version 160
[ 0.636631] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 0.878613] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 0.878623] ACPI: Power Button [PWRB]
[ 0.878707] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[ 0.884007] ACPI: Lid Switch [LID0]
[ 0.884124] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
[ 0.884137] ACPI: Sleep Button [SLPB]
[ 0.884233] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 0.884237] ACPI: Power Button [PWRF]
[ 0.981428] SCSI subsystem initialized
[ 1.015762] usbcore: registered new interface driver usbfs
[ 1.015949] usbcore: registered new interface driver hub
[ 1.016124] usbcore: registered new device driver usb
[ 1.024197] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.030409] sky2 driver version 1.28
[ 1.032311] alloc irq_desc for 19 on node 0
[ 1.032316] alloc kstat_irqs on node 0
[ 1.032327] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.032355] ehci_hcd 0000:00:13.5: EHCI Host Controller
[ 1.032394] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
[ 1.032442] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
[ 1.032458] ehci_hcd 0000:00:13.5: debug port 1
[ 1.032491] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfc609400
[ 1.032509] libata version 3.00 loaded.
[ 1.034370] alloc irq_desc for 16 on node 0
[ 1.034375] alloc kstat_irqs on node 0
[ 1.034384] sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.034398] sky2 0000:02:00.0: setting latency timer to 64
[ 1.034442] sky2 0000:02:00.0: Yukon-2 FE+ chip revision 0
[ 1.034529] alloc irq_desc for 26 on node 0
[ 1.034531] alloc kstat_irqs on node 0
[ 1.034545] sky2 0000:02:00.0: irq 26 for MSI/MSI-X
[ 1.035405] sky2 eth0: addr 00:1d:72:de:71:bb
[ 1.049094] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
[ 1.049147] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.049150] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.049154] usb usb1: Product: EHCI Host Controller
[ 1.049157] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 1.049159] usb usb1: SerialNumber: 0000:00:13.5
[ 1.049270] usb usb1: configuration #1 chosen from 1 choice
[ 1.049311] hub 1-0:1.0: USB hub found
[ 1.049322] hub 1-0:1.0: 10 ports detected
[ 1.083916] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.084251] ahci 0000:00:12.0: version 3.0
[ 1.084278] alloc irq_desc for 22 on node 0
[ 1.084281] alloc kstat_irqs on node 0
[ 1.084291] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.084331] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[ 1.084459] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 1.084464] ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio ccc
[ 1.085176] scsi0 : ahci
[ 1.085459] scsi1 : ahci
[ 1.085613] scsi2 : ahci
[ 1.085739] scsi3 : ahci
[ 1.085899] ata1: SATA max UDMA/133 abar m1024@0xfc609000 port 0xfc609100 irq 22
[ 1.085904] ata2: SATA max UDMA/133 abar m1024@0xfc609000 port 0xfc609180 irq 22
[ 1.085909] ata3: SATA max UDMA/133 abar m1024@0xfc609000 port 0xfc609200 irq 22
[ 1.085914] ata4: SATA max UDMA/133 abar m1024@0xfc609000 port 0xfc609280 irq 22
[ 1.086538] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.086585] pata_atiixp 0000:00:14.1: setting latency timer to 64
[ 1.086720] scsi4 : pata_atiixp
[ 1.086915] scsi5 : pata_atiixp
[ 1.087928] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8420 irq 14
[ 1.087932] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8428 irq 15
[ 1.088274] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.088304] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.088322] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 1.088363] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfc404000
[ 1.089037] [drm] Initialized drm 1.1.0 20060810
[ 1.137924] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.137940] ACPI: Thermal Zone [TZS0] (54 C)
[ 1.144070] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.144074] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.144078] usb usb2: Product: OHCI Host Controller
[ 1.144080] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 1.144083] usb usb2: SerialNumber: 0000:00:13.0
[ 1.144181] usb usb2: configuration #1 chosen from 1 choice
[ 1.144220] hub 2-0:1.0: USB hub found
[ 1.144255] hub 2-0:1.0: 2 ports detected
[ 1.144726] acpi device:1f: registered as cooling_device0
[ 1.145404] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1d/LNXVIDEO:01/input/input6
[ 1.145415] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[ 1.145618] alloc irq_desc for 17 on node 0
[ 1.145622] alloc kstat_irqs on node 0
[ 1.145631] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.145662] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.145697] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 1.145735] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfc405000
[ 1.147731] thermal LNXTHERM:02: registered as thermal_zone1
[ 1.147743] ACPI: Thermal Zone [TZS1] (54 C)
[ 1.200051] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.200055] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.200058] usb usb3: Product: OHCI Host Controller
[ 1.200061] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 1.200064] usb usb3: SerialNumber: 0000:00:13.1
[ 1.200233] usb usb3: configuration #1 chosen from 1 choice
[ 1.200314] hub 3-0:1.0: USB hub found
[ 1.200331] hub 3-0:1.0: 2 ports detected
[ 1.200464] alloc irq_desc for 18 on node 0
[ 1.200467] alloc kstat_irqs on node 0
[ 1.200476] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.200504] ohci_hcd 0000:00:13.2: OHCI Host Controller
[ 1.200519] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 1.200554] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfc406000
[ 1.257138] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.257143] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.257147] usb usb4: Product: OHCI Host Controller
[ 1.257150] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 1.257152] usb usb4: SerialNumber: 0000:00:13.2
[ 1.257356] usb usb4: configuration #1 chosen from 1 choice
[ 1.257446] hub 4-0:1.0: USB hub found
[ 1.257465] hub 4-0:1.0: 2 ports detected
[ 1.264140] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.264173] ohci_hcd 0000:00:13.3: OHCI Host Controller
[ 1.264206] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
[ 1.264236] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfc407000
[ 1.320065] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.320069] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.320072] usb usb5: Product: OHCI Host Controller
[ 1.320075] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 1.320078] usb usb5: SerialNumber: 0000:00:13.3
[ 1.320254] usb usb5: configuration #1 chosen from 1 choice
[ 1.320335] hub 5-0:1.0: USB hub found
[ 1.320353] hub 5-0:1.0: 2 ports detected
[ 1.320479] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.320508] ohci_hcd 0000:00:13.4: OHCI Host Controller
[ 1.320520] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
[ 1.320543] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfc408000
[ 1.378049] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.378053] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.378057] usb usb6: Product: OHCI Host Controller
[ 1.378059] usb usb6: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 1.378062] usb usb6: SerialNumber: 0000:00:13.4
[ 1.378224] usb usb6: configuration #1 chosen from 1 choice
[ 1.378303] hub 6-0:1.0: USB hub found
[ 1.378320] hub 6-0:1.0: 2 ports detected
[ 1.404025] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.412024] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.488015] usb 2-1: new low speed USB device using ohci_hcd and address 2
[ 1.568012] ata1: softreset failed (device not ready)
[ 1.568058] ata1: applying SB600 PMP SRST workaround and retrying
[ 1.649990] usb 2-1: New USB device found, idVendor=04b3, idProduct=310b
[ 1.649994] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.650173] usb 2-1: configuration #1 chosen from 1 choice
[ 1.680013] ata2: softreset failed (device not ready)
[ 1.680061] ata2: applying SB600 PMP SRST workaround and retrying
[ 1.732023] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.733410] ata1.00: ATA-8: ST9160310AS, 0303, max UDMA/133
[ 1.733414] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.733441] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 1.735104] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 1.735108] ata1.00: configured for UDMA/133
[ 1.735232] scsi 0:0:0:0: Direct-Access ATA ST9160310AS 0303 PQ: 0 ANSI: 5
[ 1.844024] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.876150] ata2.00: ATAPI: Slimtype DVD A DS8A2S, 6A11, max UDMA/100
[ 1.876179] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 1.918724] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 1.918727] ata2.00: configured for UDMA/100
[ 1.991431] scsi 1:0:0:0: CD-ROM Slimtype DVD A DS8A2S 6A11 PQ: 0 ANSI: 5
[ 2.189479] usbcore: registered new interface driver hiddev
[ 2.198345] input: HID 04b3:310b as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.0/input/input7
[ 2.198439] generic-usb 0003:04B3:310B.0001: input,hidraw0: USB HID v1.00 Mouse [HID 04b3:310b] on usb-0000:00:13.0-1/input0
[ 2.198471] usbcore: registered new interface driver usbhid
[ 2.198475] usbhid: v2.6:USB HID core driver
[ 2.205311] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.205375] sd 0:0:0:0: [sda] Write Protect is off
[ 2.205379] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.205406] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.205567] sda:
[ 2.226626] [drm] radeon kernel modesetting enabled.
[ 2.231028] radeon 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.234988] [drm] radeon: Initializing kernel modesetting.
[ 2.235057] [drm] register mmio base: 0xFC100000
[ 2.235059] [drm] register mmio size: 65536
[ 2.235256] ATOM BIOS: ATI
[ 2.235471] [drm] GPU reset succeed (RBBM_STATUS=0x10000140)
[ 2.235487] [drm] radeon: VRAM 64M
[ 2.235489] [drm] radeon: VRAM from 0x3C000000 to 0x3FFFFFFF
[ 2.235492] [drm] radeon: GTT 512M
[ 2.235494] [drm] radeon: GTT from 0x40000000 to 0x5FFFFFFF
[ 2.235523] [drm] radeon: irq initialized.
[ 2.235652] [drm] Detected VRAM RAM=64M, BAR=64M
[ 2.235658] [drm] RAM width 128bits DDR
[ 2.235751] [TTM] Zone kernel: Available graphics memory: 480110 kiB.
[ 2.235774] [drm] radeon: 64M of VRAM memory ready
[ 2.235777] [drm] radeon: 512M of GTT memory ready.
[ 2.235804] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 2.239807] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[ 2.240099] [drm] radeon: cp idle (0x10000C03)
[ 2.240151] [drm] Loading RS690/RS740 Microcode
[ 2.240488] platform radeon_cp.0: firmware: requesting radeon/RS690_cp.bin
[ 2.246327] [drm] radeon: ring at 0x0000000040000000
[ 2.246348] [drm] ring test succeeded in 1 usecs
[ 2.246485] [drm] radeon: ib pool ready.
[ 2.246564] [drm] ib test succeeded in 0 usecs
[ 2.246762] [drm] Default TV standard: NTSC
[ 2.246814] [drm] Radeon Display Connectors
[ 2.246817] [drm] Connector 0:
[ 2.246819] [drm] VGA
[ 2.246822] [drm] DDC: 0x7e50 0x7e40 0x7e54 0x7e44 0x7e58 0x7e48 0x7e5c 0x7e4c
[ 2.246824] [drm] Encoders:
[ 2.246826] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 2.246829] [drm] Connector 1:
[ 2.246830] [drm] LVDS
[ 2.246834] [drm] DDC: 0x7e40 0x7e50 0x7e44 0x7e54 0x7e48 0x7e58 0x7e4c 0x7e5c
[ 2.246836] [drm] Encoders:
[ 2.246838] [drm] LCD1: INTERNAL_LVTM1
[ 2.246840] [drm] Connector 2:
[ 2.246842] [drm] S-video
[ 2.246843] [drm] Encoders:
[ 2.246845] [drm] TV1: INTERNAL_KLDSCP_DAC1
[ 2.312053] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda pop-up
[ 2.312058] Uniform CD-ROM driver Revision: 3.20
[ 2.312187] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.445014] sda1 sda2 sda3
[ 2.445653] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.456621] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.457191] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.885832] [drm] fb mappable at 0xF8040000
[ 2.885842] [drm] vram apper at 0xF8000000
[ 2.885851] [drm] size 4096000
[ 2.885859] [drm] fb depth is 24
[ 2.885867] [drm] pitch is 5120
[ 3.158281] Console: switching to colour frame buffer device 160x50
[ 3.201467] fb0: radeondrmfb frame buffer device
[ 3.201475] registered panic notifier
[ 3.201518] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:05.0 on minor 0
[ 3.388427] irq 18: nobody cared (try booting with the "irqpoll" option)
[ 3.388543] Pid: 74, comm: udevd Not tainted 2.6.32-5-amd64 #1
[ 3.388546] Call Trace:
[ 3.388549] <IRQ> [<ffffffff81093e49>] ? __report_bad_irq+0x30/0x7d
[ 3.388563] [<ffffffff81093f9b>] ? note_interrupt+0x105/0x16e
[ 3.388568] [<ffffffff81094600>] ? handle_fasteoi_irq+0x93/0xb5
[ 3.388573] [<ffffffff8101327f>] ? handle_irq+0x17/0x1d
[ 3.388577] [<ffffffff810128d9>] ? do_IRQ+0x57/0xb6
[ 3.388582] [<ffffffff810114d3>] ? ret_from_intr+0x0/0x11
[ 3.388584] <EOI>
[ 3.388586] handlers:
[ 3.388623] [<ffffffffa004e764>] (usb_hcd_irq+0x0/0x7e [usbcore])
[ 3.388740] [<ffffffffa004e764>] (usb_hcd_irq+0x0/0x7e [usbcore])
[ 3.388850] Disabling IRQ #18
[ 3.388975] md: linear personality registered for level -1
[ 3.392731] md: multipath personality registered for level -4
[ 3.395909] md: raid0 personality registered for level 0
[ 3.401302] md: raid1 personality registered for level 1
[ 3.404322] async_tx: api initialized (async)
[ 3.405504] xor: automatically using best checksumming function: generic_sse
[ 3.424005] generic_sse: 4928.000 MB/sec
[ 3.424008] xor: using function: generic_sse (4928.000 MB/sec)
[ 3.492015] raid6: int64x1 1446 MB/s
[ 3.560013] raid6: int64x2 1877 MB/s
[ 3.628040] raid6: int64x4 1445 MB/s
[ 3.696028] raid6: int64x8 1324 MB/s
[ 3.764012] raid6: sse2x1 851 MB/s
[ 3.832024] raid6: sse2x2 1371 MB/s
[ 3.900024] raid6: sse2x4 2032 MB/s
[ 3.900026] raid6: using algorithm sse2x4 (2032 MB/s)
[ 3.908981] md: raid6 personality registered for level 6
[ 3.908985] md: raid5 personality registered for level 5
[ 3.908988] md: raid4 personality registered for level 4
[ 3.918511] md: raid10 personality registered for level 10
[ 4.192711] device-mapper: uevent: version 1.0.3
[ 4.193331] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 6.425331] PM: Starting manual resume from disk
[ 6.425337] PM: Resume from partition 253:1
[ 6.425339] PM: Checking hibernation image.
[ 6.425640] PM: Error -22 checking image file
[ 6.425643] PM: Resume from disk failed.
[ 6.472405] kjournald starting. Commit interval 5 seconds
[ 6.472418] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.874399] udev: starting version 160
[ 8.338448] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 8.345671] Marking TSC unstable due to TSC halts in idle
[ 8.347058] processor LNXCPU:00: registered as cooling_device1
[ 8.351893] Switching to clocksource hpet
[ 8.359863] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 8.363344] ACPI: Battery Slot [BAT0] (battery absent)
[ 8.482379] ACPI: AC Adapter [ADP1] (on-line)
[ 8.484144] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8410, revision 0
[ 8.485157] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 8.488230] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.498142] ACPI: WMI: Mapper loaded
[ 8.576493] EDAC MC: Ver: 2.1.0 Sep 18 2010
[ 8.611007] EDAC amd64_edac: Ver: 3.2.0 Sep 18 2010
[ 8.611091] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
[ 8.611098] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 8.611100] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 8.611102] (Note that use of the override may cause unknown side effects.)
[ 8.611120] amd64_edac: probe of 0000:00:18.2 failed with error -22
[ 8.714544] cfg80211: Using static regulatory domain info
[ 8.714548] cfg80211: Regulatory domain: US
[ 8.714551] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 8.714555] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 8.714558] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 8.714562] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 8.714565] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 8.714569] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 8.714572] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 8.714919] cfg80211: Calling CRDA for country: US
[ 8.911007] ath5k 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 8.911019] ath5k 0000:05:00.0: setting latency timer to 64
[ 8.911081] ath5k 0000:05:00.0: registered as 'phy0'
[ 9.413427] ath: EEPROM regdomain: 0x65
[ 9.413431] ath: EEPROM indicates we should expect a direct regpair map
[ 9.413437] ath: Country alpha2 being used: 00
[ 9.413439] ath: Regpair used: 0x65
[ 9.655130] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04711/0xa04000/0x0
[ 9.716697] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input9
[ 9.920151] phy0: Selected rate control algorithm 'minstrel'
[ 9.921045] Registered led device: ath5k-phy0::rx
[ 9.921071] Registered led device: ath5k-phy0::tx
[ 9.921076] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 10.649433] HDA Intel 0000:00:14.2: power state changed by ACPI to D0
[ 10.649485] HDA Intel 0000:00:14.2: power state changed by ACPI to D0
[ 10.649500] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 10.825037] hda_codec: ALC268: BIOS auto-probing.
[ 10.825633] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input10
[ 11.240418] Adding 1048568k swap on /dev/mapper/system-debian--swap. Priority:-1 extents:1 across:1048568k
[ 11.366229] EXT3 FS on dm-0, internal journal
[ 11.516996] loop: module loaded
[ 11.606447] powernow-k8: Found 1 AMD Athlon(tm) Processor 2650e processors (1 cpu cores) (version 2.20.00)
[ 11.606556] powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x16
[ 11.606559] powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x16
[ 19.334501] Adding 1048568k swap on /dev/mapper/system-debian--swap2. Priority:256 extents:1 across:1048568k
[ 22.504389] kjournald starting. Commit interval 5 seconds
[ 22.504414] EXT3-fs: mounted filesystem with ordered data mode.
[ 22.544682] kjournald starting. Commit interval 5 seconds
[ 22.545092] EXT3 FS on dm-17, internal journal
[ 22.545103] EXT3-fs: mounted filesystem with ordered data mode.
[ 22.580533] kjournald starting. Commit interval 5 seconds
[ 22.580976] EXT3 FS on dm-18, internal journal
[ 22.580985] EXT3-fs: mounted filesystem with ordered data mode.
[ 22.646569] kjournald starting. Commit interval 5 seconds
[ 22.647014] EXT3 FS on dm-20, internal journal
[ 22.647023] EXT3-fs: mounted filesystem with ordered data mode.
[ 22.734241] kjournald starting. Commit interval 5 seconds
[ 22.734946] EXT3 FS on sda1, internal journal
[ 22.734955] EXT3-fs: mounted filesystem with ordered data mode.
[ 22.784875] kjournald starting. Commit interval 5 seconds
[ 22.786153] EXT3 FS on dm-21, internal journal
[ 22.786162] EXT3-fs: mounted filesystem with ordered data mode.
[ 23.577331] kjournald starting. Commit interval 5 seconds
[ 23.598627] EXT3 FS on dm-9, internal journal
[ 23.598644] EXT3-fs: mounted filesystem with ordered data mode.
[ 25.556104] Bridge firewalling registered
[ 25.593513] device eth0 entered promiscuous mode
[ 25.604857] sky2 eth0: enabling interface
[ 25.605463] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 27.081191] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 27.081705] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 27.081795] br0: port 1(eth0) entering learning state
[ 36.460019] br0: no IPv6 routers present
[ 37.652020] eth0: no IPv6 routers present
[ 42.080022] br0: port 1(eth0) entering forwarding state
[ 53.285308] RPC: Registered udp transport module.
[ 53.285316] RPC: Registered tcp transport module.
[ 53.285321] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 53.370724] Slow work thread pool: Starting up
[ 53.370848] Slow work thread pool: Ready
[ 53.371010] FS-Cache: Loaded
[ 53.458334] FS-Cache: Netfs 'nfs' registered for caching
[ 53.555879] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 54.207625] fuse init (API version 7.13)
[ 61.420781] lp: driver loaded but no devices found
[ 61.459611] ppdev: user-space parallel port driver
[ 63.364034] br1: no IPv6 routers present
[ 71.036127] svc: failed to register lockdv1 RPC service (errno 97).
[ 71.037862] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 71.052935] NFSD: starting 90-second grace period
[ 71.251709] kvm: Nested Virtualization enabled
[ 80.393361] CPUFREQ: Per core ondemand sysfs interface is deprecated - ignore_nice_load
------------------------------------------------------------
Kernel log (kernel version 2.6.32-23, booted with 'irqpoll'):
------------------------------------------------------------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-23) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-3) ) #1 SMP Sat Sep 18 03:26:20 UTC 2010
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=/dev/mapper/system-debian--root ro quiet irqpoll
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003be80000 (usable)
[ 0.000000] BIOS-e820: 000000003be80000 - 000000003be8e000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003be8e000 - 000000003be90000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003be90000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x3be80 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-000000003be80000
[ 0.000000] 0000000000 - 003be00000 page 2M
[ 0.000000] 003be00000 - 003be80000 page 4k
[ 0.000000] kernel direct mapping tables up to 3be80000 @ 10000-13000
[ 0.000000] RAMDISK: 2c20b000 - 2cf1f06b
[ 0.000000] ACPI: RSDP 00000000000f82f0 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 000000003be84a58 00054 (v01 GATEWA SYSTEM 06040000 INNA 00000000)
[ 0.000000] ACPI: FACP 000000003be8db95 000F4 (v03 ATI Herring 06040000 ATI 000F4240)
[ 0.000000] ACPI: DSDT 000000003be84aac 090E9 (v01 ATI SB600 06040000 MSFT 03000001)
[ 0.000000] ACPI: FACS 000000003be8ffc0 00040
[ 0.000000] ACPI: SLIC 000000003be8dcfd 00176 (v01 GATEWA SYSTEM 06040000 ANNI 00000001)
[ 0.000000] ACPI: SSDT 000000003be8de73 000D3 (v01 AMD POWERNOW 06040000 AMD 00000001)
[ 0.000000] ACPI: APIC 000000003be8df46 00046 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: MCFG 000000003be8df8c 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
[ 0.000000] ACPI: HPET 000000003be8dfc8 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000003be80000
[ 0.000000] Bootmem setup node 0 0000000000000000-000000003be80000
[ 0.000000] NODE_DATA [0000000000011000 - 0000000000018fff]
[ 0.000000] bootmap [0000000000019000 - 00000000000207cf] pages 8
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 003be80000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001682414] TEXT DATA BSS ==> [0001000000 - 0001682414]
[ 0.000000] #3 [002c20b000 - 002cf1f06b] RAMDISK ==> [002c20b000 - 002cf1f06b]
[ 0.000000] #4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000]
[ 0.000000] #5 [0001683000 - 000168320c] BRK ==> [0001683000 - 000168320c]
[ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] found SMP MP-table at [ffff8800000f8460] f8460
[ 0.000000] [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff880001c00000-ffff8800029fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x0003be80
[ 0.000000] On node 0 totalpages: 245261
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 102 pages reserved
[ 0.000000] DMA zone: 3823 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3299 pages used for memmap
[ 0.000000] DMA32 zone: 237981 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538310 base: 0xfed00000
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
[ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001800000 s90328 r8192 d24360 u2097152
[ 0.000000] pcpu-alloc: s90328 r8192 d24360 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 241804
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=/dev/mapper/system-debian--root ro quiet irqpoll
[ 0.000000] Misrouted IRQ fixup and polling support enabled
[ 0.000000] This may significantly impact system performance
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ b4000000 size 32 MB
[ 0.000000] Aperture too small (32 MB) than (64 MB)
[ 0.000000] Memory: 946208k/981504k available (3055k kernel code, 460k absent, 34836k reserved, 1891k data, 584k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:256
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1596.156 MHz processor.
[ 0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.31 BogoMIPS (lpj=6384624)
[ 0.004041] Security Framework initialized
[ 0.004049] SELinux: Disabled at boot.
[ 0.004173] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.004983] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.008424] Mount-cache hash table entries: 256
[ 0.008622] Initializing cgroup subsys ns
[ 0.008627] Initializing cgroup subsys cpuacct
[ 0.008632] Initializing cgroup subsys devices
[ 0.008636] Initializing cgroup subsys freezer
[ 0.008638] Initializing cgroup subsys net_cls
[ 0.008673] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.008677] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.008680] CPU 0/0x0 -> Node 0
[ 0.008682] tseg: 003bf00000
[ 0.008686] mce: CPU supports 5 MCE banks
[ 0.008700] using C1E aware idle routine
[ 0.008703] Performance Events: AMD PMU driver.
[ 0.008709] ... version: 0
[ 0.008711] ... bit width: 48
[ 0.008713] ... generic registers: 4
[ 0.008716] ... value mask: 0000ffffffffffff
[ 0.008718] ... max period: 00007fffffffffff
[ 0.008720] ... fixed-purpose events: 0
[ 0.008723] ... event mask: 000000000000000f
[ 0.008737] SMP alternatives: switching to UP code
[ 0.016697] Freeing SMP alternatives: 28k freed
[ 0.016731] ACPI: Core revision 20090903
[ 0.028077] Setting APIC routing to flat
[ 0.028399] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.032001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.032001] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.032001] ..... (found apic 0 pin 0) ...
[ 0.075387] ....... works.
[ 0.075388] CPU0: AMD Athlon(tm) Processor 2650e stepping 02
[ 0.076001] Brought up 1 CPUs
[ 0.076001] Total of 1 processors activated (3192.31 BogoMIPS).
[ 0.076001] CPU0 attaching NULL sched-domain.
[ 0.076001] devtmpfs: initialized
[ 0.077099] regulator: core version 0.5
[ 0.077164] NET: Registered protocol family 16
[ 0.077312] node 0 link 0: io port [1000, fffff]
[ 0.077316] TOM: 0000000040000000 aka 1024M
[ 0.077319] node 0 link 0: mmio [fc100000, ffffffff]
[ 0.077323] node 0 link 0: mmio [fc000000, fc0fffff]
[ 0.077327] node 0 link 0: mmio [f8000000, fbffffff]
[ 0.077330] node 0 link 0: mmio [a0000, bffff]
[ 0.077334] node 0 link 0: mmio [f0000000, f7ffffff]
[ 0.077337] node 0 link 0: mmio [e0000000, efffffff]
[ 0.077341] node 0 link 0: mmio [40000000, dfffffff]
[ 0.077344] bus: [00,ff] on node 0 link 0
[ 0.077347] bus: 00 index 0 io port: [0, ffff]
[ 0.077350] bus: 00 index 1 mmio: [40000000, fcffffffff]
[ 0.077353] bus: 00 index 2 mmio: [a0000, bffff]
[ 0.077361] ACPI: bus type pci registered
[ 0.077451] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 12
[ 0.077455] PCI: MCFG area at e0000000 reserved in E820
[ 0.077998] PCI: Using MMCONFIG at e0000000 - e0cfffff
[ 0.078001] PCI: Using configuration type 1 for base access
[ 0.078543] bio: create slab <bio-0> at 0
[ 0.079241] ACPI: EC: Look up EC in DSDT
[ 0.083642] ACPI: BIOS _OSI(Linux) query ignored
[ 0.092072] ACPI: Interpreter enabled
[ 0.092075] ACPI: (supports S0 S3 S4 S5)
[ 0.092099] ACPI: Using IOAPIC for interrupt routing
[ 0.104955] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[ 0.105238] ACPI: No dock devices found.
[ 0.109743] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.109879] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.109883] pci 0000:00:04.0: PME# disabled
[ 0.109923] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.109927] pci 0000:00:05.0: PME# disabled
[ 0.109987] pci 0000:00:12.0: reg 10 io port: [0x8440-0x8447]
[ 0.109996] pci 0000:00:12.0: reg 14 io port: [0x8434-0x8437]
[ 0.110004] pci 0000:00:12.0: reg 18 io port: [0x8438-0x843f]
[ 0.110013] pci 0000:00:12.0: reg 1c io port: [0x8430-0x8433]
[ 0.110021] pci 0000:00:12.0: reg 20 io port: [0x8400-0x840f]
[ 0.110030] pci 0000:00:12.0: reg 24 32bit mmio: [0xfc609000-0xfc6093ff]
[ 0.110050] pci 0000:00:12.0: set SATA to AHCI mode
[ 0.110096] pci 0000:00:13.0: reg 10 32bit mmio: [0xfc404000-0xfc404fff]
[ 0.110159] pci 0000:00:13.1: reg 10 32bit mmio: [0xfc405000-0xfc405fff]
[ 0.110223] pci 0000:00:13.2: reg 10 32bit mmio: [0xfc406000-0xfc406fff]
[ 0.110286] pci 0000:00:13.3: reg 10 32bit mmio: [0xfc407000-0xfc407fff]
[ 0.110349] pci 0000:00:13.4: reg 10 32bit mmio: [0xfc408000-0xfc408fff]
[ 0.110431] pci 0000:00:13.5: reg 10 32bit mmio: [0xfc609400-0xfc6094ff]
[ 0.110488] pci 0000:00:13.5: supports D1 D2
[ 0.110491] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
[ 0.110496] pci 0000:00:13.5: PME# disabled
[ 0.110549] pci 0000:00:14.0: reg 10 io port: [0x8410-0x841f]
[ 0.110626] pci 0000:00:14.1: reg 10 io port: [0x1f0-0x1f7]
[ 0.110634] pci 0000:00:14.1: reg 14 io port: [0x3f4-0x3f7]
[ 0.110642] pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
[ 0.110651] pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
[ 0.110659] pci 0000:00:14.1: reg 20 io port: [0x8420-0x842f]
[ 0.110720] pci 0000:00:14.2: reg 10 64bit mmio: [0xfc400000-0xfc403fff]
[ 0.110767] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.110772] pci 0000:00:14.2: PME# disabled
[ 0.110996] pci 0000:01:05.0: reg 10 64bit mmio pref: [0xf8000000-0xfbffffff]
[ 0.111004] pci 0000:01:05.0: reg 18 64bit mmio: [0xfc100000-0xfc10ffff]
[ 0.111009] pci 0000:01:05.0: reg 20 io port: [0x9400-0x94ff]
[ 0.111014] pci 0000:01:05.0: reg 24 32bit mmio: [0xfc000000-0xfc0fffff]
[ 0.111027] pci 0000:01:05.0: supports D1 D2
[ 0.111047] pci 0000:00:01.0: bridge io port: [0x9000-0x9fff]
[ 0.111051] pci 0000:00:01.0: bridge 32bit mmio: [0xfc000000-0xfc1fffff]
[ 0.111057] pci 0000:00:01.0: bridge 64bit mmio pref: [0xf8000000-0xfbffffff]
[ 0.111111] pci 0000:02:00.0: reg 10 64bit mmio: [0xfc300000-0xfc303fff]
[ 0.111120] pci 0000:02:00.0: reg 18 io port: [0xa400-0xa4ff]
[ 0.111175] pci 0000:02:00.0: supports D1 D2
[ 0.111178] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.111184] pci 0000:02:00.0: PME# disabled
[ 0.116091] pci 0000:00:04.0: bridge io port: [0xa000-0xafff]
[ 0.116095] pci 0000:00:04.0: bridge 32bit mmio: [0xfc300000-0xfc3fffff]
[ 0.116144] pci 0000:05:00.0: reg 10 64bit mmio: [0xfc200000-0xfc20ffff]
[ 0.116223] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.116295] pci 0000:00:05.0: bridge 32bit mmio: [0xfc200000-0xfc2fffff]
[ 0.116360] pci 0000:00:14.4: transparent bridge
[ 0.116385] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.116532] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
[ 0.116615] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
[ 0.116733] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.116774] ACPI Warning for \_SB_.PCI0.P2P_._PRT: Return Package has no elements (empty) (20090903/nspredef-433)
[ 0.116788] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.122105] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[ 0.122249] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[ 0.122391] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[ 0.122533] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[ 0.122674] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[ 0.122816] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[ 0.122962] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[ 0.123103] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[ 0.123244] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.123248] vgaarb: loaded
[ 0.123355] PCI: Using ACPI for IRQ routing
[ 0.123573] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.123580] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.125039] Switching to clocksource tsc
[ 0.126447] pnp: PnP ACPI init
[ 0.126471] ACPI: bus type pnp registered
[ 0.131703] pnp: PnP ACPI: found 11 devices
[ 0.131706] ACPI: ACPI bus type pnp unregistered
[ 0.131719] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.131724] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.131733] system 00:06: ioport range 0x1080-0x1080 has been reserved
[ 0.131737] system 00:06: ioport range 0x220-0x22f has been reserved
[ 0.131741] system 00:06: ioport range 0x40b-0x40b has been reserved
[ 0.131745] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
[ 0.131749] system 00:06: ioport range 0x4d6-0x4d6 has been reserved
[ 0.131753] system 00:06: ioport range 0x530-0x537 has been reserved
[ 0.131756] system 00:06: ioport range 0xc00-0xc01 has been reserved
[ 0.131760] system 00:06: ioport range 0xc14-0xc14 has been reserved
[ 0.131764] system 00:06: ioport range 0xc50-0xc52 has been reserved
[ 0.131768] system 00:06: ioport range 0xc6c-0xc6c has been reserved
[ 0.131772] system 00:06: ioport range 0xc6f-0xc6f has been reserved
[ 0.131776] system 00:06: ioport range 0xcd0-0xcd1 has been reserved
[ 0.131780] system 00:06: ioport range 0xcd2-0xcd3 has been reserved
[ 0.131784] system 00:06: ioport range 0xcd4-0xcd5 has been reserved
[ 0.131788] system 00:06: ioport range 0xcd6-0xcd7 has been reserved
[ 0.131792] system 00:06: ioport range 0xcd8-0xcdf has been reserved
[ 0.131796] system 00:06: ioport range 0x8000-0x805f has been reserved
[ 0.131800] system 00:06: ioport range 0xf40-0xf47 has been reserved
[ 0.131804] system 00:06: ioport range 0x280-0x293 has been reserved
[ 0.131808] system 00:06: ioport range 0x87f-0x87f has been reserved
[ 0.131813] system 00:06: iomem range 0xff800000-0xffefffff has been reserved
[ 0.131827] system 00:07: iomem range 0xe0000-0xfffff could not be reserved
[ 0.131831] system 00:07: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.136649] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.136653] pci 0000:00:01.0: IO window: 0x9000-0x9fff
[ 0.136658] pci 0000:00:01.0: MEM window: 0xfc000000-0xfc1fffff
[ 0.136662] pci 0000:00:01.0: PREFETCH window: 0x000000f8000000-0x000000fbffffff
[ 0.136668] pci 0000:00:04.0: PCI bridge, secondary bus 0000:02
[ 0.136671] pci 0000:00:04.0: IO window: 0xa000-0xafff
[ 0.136675] pci 0000:00:04.0: MEM window: 0xfc300000-0xfc3fffff
[ 0.136679] pci 0000:00:04.0: PREFETCH window: disabled
[ 0.136683] pci 0000:00:05.0: PCI bridge, secondary bus 0000:05
[ 0.136686] pci 0000:00:05.0: IO window: disabled
[ 0.136690] pci 0000:00:05.0: MEM window: 0xfc200000-0xfc2fffff
[ 0.136693] pci 0000:00:05.0: PREFETCH window: disabled
[ 0.136698] pci 0000:00:14.4: PCI bridge, secondary bus 0000:0b
[ 0.136701] pci 0000:00:14.4: IO window: disabled
[ 0.136710] pci 0000:00:14.4: MEM window: disabled
[ 0.136715] pci 0000:00:14.4: PREFETCH window: disabled
[ 0.136732] pci 0000:00:04.0: setting latency timer to 64
[ 0.136739] pci 0000:00:05.0: setting latency timer to 64
[ 0.136749] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.136752] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.136756] pci_bus 0000:01: resource 0 io: [0x9000-0x9fff]
[ 0.136759] pci_bus 0000:01: resource 1 mem: [0xfc000000-0xfc1fffff]
[ 0.136763] pci_bus 0000:01: resource 2 pref mem [0xf8000000-0xfbffffff]
[ 0.136766] pci_bus 0000:02: resource 0 io: [0xa000-0xafff]
[ 0.136770] pci_bus 0000:02: resource 1 mem: [0xfc300000-0xfc3fffff]
[ 0.136773] pci_bus 0000:05: resource 1 mem: [0xfc200000-0xfc2fffff]
[ 0.136777] pci_bus 0000:0b: resource 3 io: [0x00-0xffff]
[ 0.136780] pci_bus 0000:0b: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.136827] NET: Registered protocol family 2
[ 0.136960] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.137682] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 0.139134] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.139811] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.139816] TCP reno registered
[ 0.139933] NET: Registered protocol family 1
[ 0.140048] pci 0000:01:05.0: Boot video device
[ 0.140118] Unpacking initramfs...
[ 0.564571] Freeing initrd memory: 13392k freed
[ 0.575082] audit: initializing netlink socket (disabled)
[ 0.575097] type=2000 audit(1286182273.574:1): initialized
[ 0.579122] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.581059] VFS: Disk quotas dquot_6.5.2
[ 0.581131] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.581245] msgmni has been set to 1874
[ 0.581458] alg: No test for stdrng (krng)
[ 0.581534] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.581538] io scheduler noop registered
[ 0.581540] io scheduler anticipatory registered
[ 0.581543] io scheduler deadline registered
[ 0.581589] io scheduler cfq registered (default)
[ 0.581775] alloc irq_desc for 24 on node 0
[ 0.581778] alloc kstat_irqs on node 0
[ 0.581789] pcieport 0000:00:04.0: irq 24 for MSI/MSI-X
[ 0.581796] pcieport 0000:00:04.0: setting latency timer to 64
[ 0.581906] alloc irq_desc for 25 on node 0
[ 0.581908] alloc kstat_irqs on node 0
[ 0.581914] pcieport 0000:00:05.0: irq 25 for MSI/MSI-X
[ 0.581920] pcieport 0000:00:05.0: setting latency timer to 64
[ 0.584162] Linux agpgart interface v0.103
[ 0.584220] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.584657] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.584729] PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.594574] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 0.600942] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.600949] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.600983] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.601012] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.601044] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.601196] mice: PS/2 mouse device common for all mice
[ 0.601477] rtc_cmos 00:04: RTC can wake from S4
[ 0.601532] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.601564] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.601579] cpuidle: using governor ladder
[ 0.601582] cpuidle: using governor menu
[ 0.601588] No iBFT detected.
[ 0.602006] TCP cubic registered
[ 0.602169] NET: Registered protocol family 10
[ 0.602820] lo: Disabled Privacy Extensions
[ 0.603197] Mobile IPv6
[ 0.603200] NET: Registered protocol family 17
[ 0.603316] PM: Resume from disk failed.
[ 0.603330] registered taskstats version 1
[ 0.603676] rtc_cmos 00:04: setting system clock to 2010-10-04 08:51:15 UTC (1286182275)
[ 0.603724] Initalizing network drop monitor service
[ 0.603759] Freeing unused kernel memory: 584k freed
[ 0.604158] Write protecting the kernel read-only data: 4208k
[ 0.621980] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 0.628550] udev: starting version 160
[ 0.905611] SCSI subsystem initialized
[ 0.920750] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 0.920760] ACPI: Power Button [PWRB]
[ 0.920887] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[ 0.944091] ACPI: Lid Switch [LID0]
[ 0.944304] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
[ 0.944317] ACPI: Sleep Button [SLPB]
[ 0.944464] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 0.944469] ACPI: Power Button [PWRF]
[ 0.945068] usbcore: registered new interface driver usbfs
[ 0.945244] usbcore: registered new interface driver hub
[ 0.945415] usbcore: registered new device driver usb
[ 0.952413] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.959546] sky2 driver version 1.28
[ 0.959630] alloc irq_desc for 19 on node 0
[ 0.959633] alloc kstat_irqs on node 0
[ 0.959644] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.959673] ehci_hcd 0000:00:13.5: EHCI Host Controller
[ 0.959714] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
[ 0.959757] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
[ 0.959773] ehci_hcd 0000:00:13.5: debug port 1
[ 0.959807] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfc609400
[ 0.960007] libata version 3.00 loaded.
[ 0.965232] alloc irq_desc for 16 on node 0
[ 0.965237] alloc kstat_irqs on node 0
[ 0.965248] sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.965262] sky2 0000:02:00.0: setting latency timer to 64
[ 0.965303] sky2 0000:02:00.0: Yukon-2 FE+ chip revision 0
[ 0.965391] alloc irq_desc for 26 on node 0
[ 0.965393] alloc kstat_irqs on node 0
[ 0.965406] sky2 0000:02:00.0: irq 26 for MSI/MSI-X
[ 0.966333] sky2 eth0: addr 00:1d:72:de:71:bb
[ 0.970769] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
[ 0.970822] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.970826] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.970830] usb usb1: Product: EHCI Host Controller
[ 0.970833] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 0.970835] usb usb1: SerialNumber: 0000:00:13.5
[ 0.970941] usb usb1: configuration #1 chosen from 1 choice
[ 0.970993] hub 1-0:1.0: USB hub found
[ 0.971005] hub 1-0:1.0: 10 ports detected
[ 0.985951] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.988049] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.988096] pata_atiixp 0000:00:14.1: setting latency timer to 64
[ 0.990822] scsi0 : pata_atiixp
[ 0.993296] scsi1 : pata_atiixp
[ 0.994665] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8420 irq 14
[ 0.994670] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8428 irq 15
[ 0.996987] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.997017] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 0.997037] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 0.997078] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfc404000
[ 1.008187] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.008199] ACPI: Thermal Zone [TZS0] (41 C)
[ 1.017269] acpi device:1f: registered as cooling_device0
[ 1.017901] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1d/LNXVIDEO:01/input/input6
[ 1.017911] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[ 1.019524] thermal LNXTHERM:02: registered as thermal_zone1
[ 1.019536] ACPI: Thermal Zone [TZS1] (41 C)
[ 1.052059] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.052063] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.052066] usb usb2: Product: OHCI Host Controller
[ 1.052069] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 1.052072] usb usb2: SerialNumber: 0000:00:13.0
[ 1.052226] usb usb2: configuration #1 chosen from 1 choice
[ 1.052304] hub 2-0:1.0: USB hub found
[ 1.052322] hub 2-0:1.0: 2 ports detected
[ 1.052447] ahci 0000:00:12.0: version 3.0
[ 1.052471] alloc irq_desc for 22 on node 0
[ 1.052474] alloc kstat_irqs on node 0
[ 1.052484] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.052524] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[ 1.052647] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 1.052653] ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio ccc
[ 1.053349] scsi2 : ahci
[ 1.053592] scsi3 : ahci
[ 1.053716] scsi4 : ahci
[ 1.053832] scsi5 : ahci
[ 1.053997] ata3: SATA max UDMA/133 abar m1024@0xfc609000 port 0xfc609100 irq 22
[ 1.054001] ata4: SATA max UDMA/133 abar m1024@0xfc609000 port 0xfc609180 irq 22
[ 1.054006] ata5: SATA max UDMA/133 abar m1024@0xfc609000 port 0xfc609200 irq 22
[ 1.054011] ata6: SATA max UDMA/133 abar m1024@0xfc609000 port 0xfc609280 irq 22
[ 1.054622] alloc irq_desc for 17 on node 0
[ 1.054626] alloc kstat_irqs on node 0
[ 1.054635] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.054668] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.054687] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 1.054725] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfc405000
[ 1.108064] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.108069] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.108073] usb usb3: Product: OHCI Host Controller
[ 1.108076] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 1.108078] usb usb3: SerialNumber: 0000:00:13.1
[ 1.108193] usb usb3: configuration #1 chosen from 1 choice
[ 1.108235] hub 3-0:1.0: USB hub found
[ 1.108251] hub 3-0:1.0: 2 ports detected
[ 1.108483] alloc irq_desc for 18 on node 0
[ 1.108486] alloc kstat_irqs on node 0
[ 1.108496] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.108526] ohci_hcd 0000:00:13.2: OHCI Host Controller
[ 1.108541] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 1.108579] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfc406000
[ 1.164050] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.164054] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.164058] usb usb4: Product: OHCI Host Controller
[ 1.164060] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 1.164063] usb usb4: SerialNumber: 0000:00:13.2
[ 1.164235] usb usb4: configuration #1 chosen from 1 choice
[ 1.164314] hub 4-0:1.0: USB hub found
[ 1.164331] hub 4-0:1.0: 2 ports detected
[ 1.164453] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.164478] ohci_hcd 0000:00:13.3: OHCI Host Controller
[ 1.164492] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
[ 1.164514] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfc407000
[ 1.220054] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.220058] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.220061] usb usb5: Product: OHCI Host Controller
[ 1.220064] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 1.220067] usb usb5: SerialNumber: 0000:00:13.3
[ 1.220224] usb usb5: configuration #1 chosen from 1 choice
[ 1.220304] hub 5-0:1.0: USB hub found
[ 1.220322] hub 5-0:1.0: 2 ports detected
[ 1.220428] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.220450] ohci_hcd 0000:00:13.4: OHCI Host Controller
[ 1.220461] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
[ 1.220481] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfc408000
[ 1.276058] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.276062] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.276065] usb usb6: Product: OHCI Host Controller
[ 1.276067] usb usb6: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 1.276070] usb usb6: SerialNumber: 0000:00:13.4
[ 1.276223] usb usb6: configuration #1 chosen from 1 choice
[ 1.276299] hub 6-0:1.0: USB hub found
[ 1.276316] hub 6-0:1.0: 2 ports detected
[ 1.372052] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.372098] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.492010] usb 2-1: new low speed USB device using ohci_hcd and address 2
[ 1.536008] ata3: softreset failed (device not ready)
[ 1.536055] ata3: applying SB600 PMP SRST workaround and retrying
[ 1.653984] usb 2-1: New USB device found, idVendor=04b3, idProduct=310b
[ 1.653987] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.654185] usb 2-1: configuration #1 chosen from 1 choice
[ 1.700027] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.701413] ata3.00: ATA-8: ST9160310AS, 0303, max UDMA/133
[ 1.701418] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.701445] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 1.703110] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 1.703113] ata3.00: configured for UDMA/133
[ 1.703234] scsi 2:0:0:0: Direct-Access ATA ST9160310AS 0303 PQ: 0 ANSI: 5
[ 1.704014] ata4: softreset failed (device not ready)
[ 1.704060] ata4: applying SB600 PMP SRST workaround and retrying
[ 1.868019] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.880844] ata4.00: ATAPI: Slimtype DVD A DS8A2S, 6A11, max UDMA/100
[ 1.880873] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 1.894957] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 1.894961] ata4.00: configured for UDMA/100
[ 1.899619] scsi 3:0:0:0: CD-ROM Slimtype DVD A DS8A2S 6A11 PQ: 0 ANSI: 5
[ 1.942390] [drm] Initialized drm 1.1.0 20060810
[ 1.960244] usbcore: registered new interface driver hiddev
[ 1.968667] input: HID 04b3:310b as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.0/input/input7
[ 1.968765] generic-usb 0003:04B3:310B.0001: input,hidraw0: USB HID v1.00 Mouse [HID 04b3:310b] on usb-0000:00:13.0-1/input0
[ 1.968797] usbcore: registered new interface driver usbhid
[ 1.968801] usbhid: v2.6:USB HID core driver
[ 1.979645] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.979709] sd 2:0:0:0: [sda] Write Protect is off
[ 1.979713] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.979740] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.979904] sda:sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda pop-up
[ 1.997971] Uniform CD-ROM driver Revision: 3.20
[ 1.998354] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 2.220383] sda1 sda2 sda3
[ 2.221013] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.251481] [drm] radeon kernel modesetting enabled.
[ 2.257020] radeon 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.261302] [drm] radeon: Initializing kernel modesetting.
[ 2.261377] [drm] register mmio base: 0xFC100000
[ 2.261379] [drm] register mmio size: 65536
[ 2.261566] ATOM BIOS: ATI
[ 2.261779] [drm] GPU reset succeed (RBBM_STATUS=0x10000140)
[ 2.261799] [drm] radeon: VRAM 64M
[ 2.261802] [drm] radeon: VRAM from 0x3C000000 to 0x3FFFFFFF
[ 2.261804] [drm] radeon: GTT 512M
[ 2.261806] [drm] radeon: GTT from 0x40000000 to 0x5FFFFFFF
[ 2.261833] [drm] radeon: irq initialized.
[ 2.262017] [drm] Detected VRAM RAM=64M, BAR=64M
[ 2.262022] [drm] RAM width 128bits DDR
[ 2.263178] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 2.263645] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 2.263889] [TTM] Zone kernel: Available graphics memory: 480110 kiB.
[ 2.263913] [drm] radeon: 64M of VRAM memory ready
[ 2.263916] [drm] radeon: 512M of GTT memory ready.
[ 2.263933] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 2.267882] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[ 2.267910] [drm] radeon: cp idle (0x10000C03)
[ 2.267965] [drm] Loading RS690/RS740 Microcode
[ 2.270241] platform radeon_cp.0: firmware: requesting radeon/RS690_cp.bin
[ 2.274637] [drm] radeon: ring at 0x0000000040000000
[ 2.274658] [drm] ring test succeeded in 1 usecs
[ 2.274788] [drm] radeon: ib pool ready.
[ 2.274858] [drm] ib test succeeded in 0 usecs
[ 2.275092] [drm] Default TV standard: NTSC
[ 2.275130] [drm] Radeon Display Connectors
[ 2.275133] [drm] Connector 0:
[ 2.275134] [drm] VGA
[ 2.275138] [drm] DDC: 0x7e50 0x7e40 0x7e54 0x7e44 0x7e58 0x7e48 0x7e5c 0x7e4c
[ 2.275140] [drm] Encoders:
[ 2.275142] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 2.275144] [drm] Connector 1:
[ 2.275146] [drm] LVDS
[ 2.275149] [drm] DDC: 0x7e40 0x7e50 0x7e44 0x7e54 0x7e48 0x7e58 0x7e4c 0x7e5c
[ 2.275152] [drm] Encoders:
[ 2.275154] [drm] LCD1: INTERNAL_LVTM1
[ 2.275156] [drm] Connector 2:
[ 2.275157] [drm] S-video
[ 2.275159] [drm] Encoders:
[ 2.275161] [drm] TV1: INTERNAL_KLDSCP_DAC1
[ 2.836730] [drm] fb mappable at 0xF8040000
[ 2.836734] [drm] vram apper at 0xF8000000
[ 2.836737] [drm] size 4096000
[ 2.836739] [drm] fb depth is 24
[ 2.836741] [drm] pitch is 5120
[ 3.153707] Console: switching to colour frame buffer device 160x50
[ 3.163386] fb0: radeondrmfb frame buffer device
[ 3.163388] registered panic notifier
[ 3.163603] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:05.0 on minor 0
[ 3.238714] md: linear personality registered for level -1
[ 3.242471] md: multipath personality registered for level -4
[ 3.245657] md: raid0 personality registered for level 0
[ 3.250989] md: raid1 personality registered for level 1
[ 3.254000] async_tx: api initialized (async)
[ 3.255175] xor: automatically using best checksumming function: generic_sse
[ 3.272005] generic_sse: 4927.000 MB/sec
[ 3.272008] xor: using function: generic_sse (4927.000 MB/sec)
[ 3.340008] raid6: int64x1 1437 MB/s
[ 3.408023] raid6: int64x2 1884 MB/s
[ 3.476036] raid6: int64x4 1447 MB/s
[ 3.544046] raid6: int64x8 1325 MB/s
[ 3.612047] raid6: sse2x1 849 MB/s
[ 3.680016] raid6: sse2x2 1359 MB/s
[ 3.748036] raid6: sse2x4 1998 MB/s
[ 3.748039] raid6: using algorithm sse2x4 (1998 MB/s)
[ 3.756491] md: raid6 personality registered for level 6
[ 3.756495] md: raid5 personality registered for level 5
[ 3.756498] md: raid4 personality registered for level 4
[ 3.765985] md: raid10 personality registered for level 10
[ 4.034849] device-mapper: uevent: version 1.0.3
[ 4.035471] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 6.266885] PM: Starting manual resume from disk
[ 6.266891] PM: Resume from partition 253:1
[ 6.266893] PM: Checking hibernation image.
[ 6.267206] PM: Error -22 checking image file
[ 6.267209] PM: Resume from disk failed.
[ 6.289243] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 6.289248] EXT3-fs: write access will be enabled during recovery.
[ 6.457183] kjournald starting. Commit interval 5 seconds
[ 6.457200] EXT3-fs: recovery complete.
[ 6.458328] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.883050] udev: starting version 160
[ 8.258808] Marking TSC unstable due to TSC halts in idle
[ 8.258973] processor LNXCPU:00: registered as cooling_device1
[ 8.276156] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 8.276286] Switching to clocksource hpet
[ 8.298239] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 8.329281] ACPI: Battery Slot [BAT0] (battery absent)
[ 8.346862] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8410, revision 0
[ 8.350156] ACPI: AC Adapter [ADP1] (on-line)
[ 8.476972] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 8.485635] ACPI: WMI: Mapper loaded
[ 8.488531] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.620679] EDAC MC: Ver: 2.1.0 Sep 18 2010
[ 8.667587] EDAC amd64_edac: Ver: 3.2.0 Sep 18 2010
[ 8.670670] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
[ 8.670678] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 8.670680] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 8.670683] (Note that use of the override may cause unknown side effects.)
[ 8.670706] amd64_edac: probe of 0000:00:18.2 failed with error -22
[ 8.801519] cfg80211: Using static regulatory domain info
[ 8.801524] cfg80211: Regulatory domain: US
[ 8.801526] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 8.801530] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 8.801534] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 8.801538] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 8.801541] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 8.801545] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 8.801548] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 8.801909] cfg80211: Calling CRDA for country: US
[ 9.232334] ath5k 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 9.232346] ath5k 0000:05:00.0: setting latency timer to 64
[ 9.232414] ath5k 0000:05:00.0: registered as 'phy0'
[ 9.740899] ath: EEPROM regdomain: 0x65
[ 9.740904] ath: EEPROM indicates we should expect a direct regpair map
[ 9.740909] ath: Country alpha2 being used: 00
[ 9.740912] ath: Regpair used: 0x65
[ 9.870568] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04711/0xa04000/0x0
[ 9.924405] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input9
[ 10.084331] phy0: Selected rate control algorithm 'minstrel'
[ 10.085233] Registered led device: ath5k-phy0::rx
[ 10.085260] Registered led device: ath5k-phy0::tx
[ 10.085264] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 10.269569] HDA Intel 0000:00:14.2: power state changed by ACPI to D0
[ 10.269620] HDA Intel 0000:00:14.2: power state changed by ACPI to D0
[ 10.269635] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 10.689425] hda_codec: ALC268: BIOS auto-probing.
[ 10.690019] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input10
[ 11.060274] Adding 1048568k swap on /dev/mapper/system-debian--swap. Priority:-1 extents:1 across:1048568k
[ 11.174894] EXT3 FS on dm-0, internal journal
[ 11.378533] loop: module loaded
[ 11.437505] powernow-k8: Found 1 AMD Athlon(tm) Processor 2650e processors (1 cpu cores) (version 2.20.00)
[ 11.437615] powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x16
[ 11.437618] powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x16
[ 18.943361] Adding 1048568k swap on /dev/mapper/system-debian--swap2. Priority:256 extents:1 across:1048568k
[ 25.177981] kjournald starting. Commit interval 5 seconds
[ 25.178006] EXT3-fs: mounted filesystem with ordered data mode.
[ 25.218249] kjournald starting. Commit interval 5 seconds
[ 25.252580] EXT3 FS on dm-17, internal journal
[ 25.252600] EXT3-fs: mounted filesystem with ordered data mode.
[ 25.287444] kjournald starting. Commit interval 5 seconds
[ 25.287876] EXT3 FS on dm-18, internal journal
[ 25.287887] EXT3-fs: mounted filesystem with ordered data mode.
[ 25.353477] kjournald starting. Commit interval 5 seconds
[ 25.353907] EXT3 FS on dm-20, internal journal
[ 25.353916] EXT3-fs: mounted filesystem with ordered data mode.
[ 25.441139] kjournald starting. Commit interval 5 seconds
[ 25.441845] EXT3 FS on sda1, internal journal
[ 25.441854] EXT3-fs: mounted filesystem with ordered data mode.
[ 25.491770] kjournald starting. Commit interval 5 seconds
[ 25.493003] EXT3 FS on dm-21, internal journal
[ 25.493011] EXT3-fs: mounted filesystem with ordered data mode.
[ 25.984395] kjournald starting. Commit interval 5 seconds
[ 25.996708] EXT3 FS on dm-9, internal journal
[ 25.996720] EXT3-fs: mounted filesystem with ordered data mode.
[ 27.995671] Bridge firewalling registered
[ 28.033496] device eth0 entered promiscuous mode
[ 28.041083] sky2 eth0: enabling interface
[ 28.048586] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 29.744942] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 29.745465] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 29.745558] br0: port 1(eth0) entering learning state
[ 39.032069] br0: no IPv6 routers present
[ 40.284065] eth0: no IPv6 routers present
[ 44.744066] br0: port 1(eth0) entering forwarding state
[ 47.075020] RPC: Registered udp transport module.
[ 47.075028] RPC: Registered tcp transport module.
[ 47.075034] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 47.162187] Slow work thread pool: Starting up
[ 47.162312] Slow work thread pool: Ready
[ 47.162472] FS-Cache: Loaded
[ 47.248752] FS-Cache: Netfs 'nfs' registered for caching
[ 47.335366] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 48.009509] fuse init (API version 7.13)
[ 54.400993] lp: driver loaded but no devices found
[ 54.440671] ppdev: user-space parallel port driver
[ 57.592064] br1: no IPv6 routers present
[ 58.896000] kvm: Nested Virtualization enabled
[ 59.066888] svc: failed to register lockdv1 RPC service (errno 97).
[ 59.070325] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 59.097825] NFSD: starting 90-second grace period
[ 74.240364] CPUFREQ: Per core ondemand sysfs interface is deprecated - ignore_nice_load
[ 82.197318] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
------------------------------------------------------------
/proc/interrupts (when booted without irqpoll)
------------------------------------------------------------
CPU0
0: 16863 IO-APIC-edge timer
1: 1831 IO-APIC-edge i8042
7: 1 IO-APIC-edge
8: 1 IO-APIC-edge rtc0
9: 105 IO-APIC-fasteoi acpi
12: 148 IO-APIC-edge i8042
14: 0 IO-APIC-edge pata_atiixp
15: 0 IO-APIC-edge pata_atiixp
16: 885 IO-APIC-fasteoi ohci_hcd:usb2, HDA Intel
17: 2 IO-APIC-fasteoi ohci_hcd:usb3, ohci_hcd:usb5, radeon, ath
18: 100002 IO-APIC-fasteoi ohci_hcd:usb4, ohci_hcd:usb6
19: 2 IO-APIC-fasteoi ehci_hcd:usb1
22: 16707 IO-APIC-fasteoi ahci
26: 326 PCI-MSI-edge sky2@pci:0000:02:00.0
NMI: 0 Non-maskable interrupts
LOC: 31997 Local timer interrupts
SPU: 0 Spurious interrupts
PMI: 0 Performance monitoring interrupts
PND: 0 Performance pending work
RES: 0 Rescheduling interrupts
CAL: 0 Function call interrupts
TLB: 0 TLB shootdowns
TRM: 0 Thermal event interrupts
THR: 0 Threshold APIC interrupts
MCE: 0 Machine check exceptions
MCP: 2 Machine check polls
ERR: 1
MIS: 0
------------------------------------------------------------
-- Package-specific info:
** Version:
Linux version 2.6.32-5-amd64 (Debian 2.6.32-23) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-3) ) #1 SMP Sat Sep 18 03:26:20 UTC 2010
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=/dev/mapper/system-debian--root ro quiet irqpoll
** Not tainted
** Kernel log:
[ 8.386978] ACPI: AC Adapter [ADP1] (on-line)
[ 8.387095] ACPI: WMI: Mapper loaded
[ 8.387326] Marking TSC unstable due to TSC halts in idle
[ 8.387465] processor LNXCPU:00: registered as cooling_device1
[ 8.402192] Switching to clocksource hpet
[ 8.406151] ACPI: Battery Slot [BAT0] (battery absent)
[ 8.521047] EDAC MC: Ver: 2.1.0 Sep 18 2010
[ 8.552125] EDAC amd64_edac: Ver: 3.2.0 Sep 18 2010
[ 8.553003] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 8.554556] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
[ 8.554564] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 8.554566] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 8.554568] (Note that use of the override may cause unknown side effects.)
[ 8.554587] amd64_edac: probe of 0000:00:18.2 failed with error -22
[ 8.572697] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 8.665736] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.685148] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8410, revision 0
[ 8.695824] cfg80211: Using static regulatory domain info
[ 8.695828] cfg80211: Regulatory domain: US
[ 8.695831] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 8.695835] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 8.695838] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 8.695842] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 8.695846] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 8.695849] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 8.695853] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 8.696280] cfg80211: Calling CRDA for country: US
[ 9.127480] ath5k 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 9.127492] ath5k 0000:05:00.0: setting latency timer to 64
[ 9.127565] ath5k 0000:05:00.0: registered as 'phy0'
[ 9.632750] ath: EEPROM regdomain: 0x65
[ 9.632754] ath: EEPROM indicates we should expect a direct regpair map
[ 9.632760] ath: Country alpha2 being used: 00
[ 9.632762] ath: Regpair used: 0x65
[ 9.893720] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04711/0xa04000/0x0
[ 9.903052] phy0: Selected rate control algorithm 'minstrel'
[ 9.903936] Registered led device: ath5k-phy0::rx
[ 9.903962] Registered led device: ath5k-phy0::tx
[ 9.903967] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 9.958194] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input9
[ 10.142555] HDA Intel 0000:00:14.2: power state changed by ACPI to D0
[ 10.142607] HDA Intel 0000:00:14.2: power state changed by ACPI to D0
[ 10.142622] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 10.574513] hda_codec: ALC268: BIOS auto-probing.
[ 10.575101] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input10
[ 11.056502] Adding 1048568k swap on /dev/mapper/system-debian--swap. Priority:-1 extents:1 across:1048568k
[ 11.171055] EXT3 FS on dm-0, internal journal
[ 11.308092] loop: module loaded
[ 11.433677] powernow-k8: Found 1 AMD Athlon(tm) Processor 2650e processors (1 cpu cores) (version 2.20.00)
[ 11.433787] powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x16
[ 11.433791] powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x16
[ 19.061745] Adding 1048568k swap on /dev/mapper/system-debian--swap2. Priority:256 extents:1 across:1048568k
[ 58.752881] kjournald starting. Commit interval 5 seconds
[ 58.752907] EXT3-fs: mounted filesystem with ordered data mode.
[ 58.793139] kjournald starting. Commit interval 5 seconds
[ 58.793535] EXT3 FS on dm-17, internal journal
[ 58.793544] EXT3-fs: mounted filesystem with ordered data mode.
[ 58.940107] kjournald starting. Commit interval 5 seconds
[ 58.940684] EXT3 FS on dm-18, internal journal
[ 58.940695] EXT3-fs: mounted filesystem with ordered data mode.
[ 59.106137] kjournald starting. Commit interval 5 seconds
[ 59.106643] EXT3 FS on dm-20, internal journal
[ 59.106655] EXT3-fs: mounted filesystem with ordered data mode.
[ 59.338109] kjournald starting. Commit interval 5 seconds
[ 59.338815] EXT3 FS on sda1, internal journal
[ 59.338827] EXT3-fs: mounted filesystem with ordered data mode.
[ 59.577494] kjournald starting. Commit interval 5 seconds
[ 59.577957] EXT3 FS on dm-21, internal journal
[ 59.577969] EXT3-fs: mounted filesystem with ordered data mode.
[ 59.803610] kjournald starting. Commit interval 5 seconds
[ 59.804037] EXT3 FS on dm-9, internal journal
[ 59.804048] EXT3-fs: mounted filesystem with ordered data mode.
[ 61.671063] Bridge firewalling registered
[ 61.694033] device eth0 entered promiscuous mode
[ 61.701653] sky2 eth0: enabling interface
[ 61.709426] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 63.345152] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 63.345673] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 63.345750] br0: port 1(eth0) entering learning state
[ 72.112083] br0: no IPv6 routers present
[ 73.348066] eth0: no IPv6 routers present
[ 78.344071] br0: port 1(eth0) entering forwarding state
[ 84.042099] RPC: Registered udp transport module.
[ 84.042108] RPC: Registered tcp transport module.
[ 84.042114] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 84.144933] Slow work thread pool: Starting up
[ 84.145059] Slow work thread pool: Ready
[ 84.145216] FS-Cache: Loaded
[ 84.232658] FS-Cache: Netfs 'nfs' registered for caching
[ 84.330262] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 85.074622] fuse init (API version 7.13)
[ 92.487023] lp: driver loaded but no devices found
[ 92.533832] ppdev: user-space parallel port driver
[ 94.488072] br1: no IPv6 routers present
[ 102.124358] svc: failed to register lockdv1 RPC service (errno 97).
[ 102.125830] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 102.141488] NFSD: starting 90-second grace period
[ 103.290203] kvm: Nested Virtualization enabled
[ 116.331136] CPUFREQ: Per core ondemand sysfs interface is deprecated - ignore_nice_load
[ 313.446925] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
** Model information
sys_vendor: eMachines
product_name: eMachines D620
product_version: 0100
chassis_vendor: eMachines
chassis_version: None
bios_vendor: Phoenix Technologies LTD
bios_version: V1.03
board_vendor: eMachines
board_name: eMachines D620
board_version: Rev
** Loaded modules:
Module Size Used by
kvm_amd 31734 0
kvm 213672 1 kvm_amd
parport_pc 18855 0
ppdev 5030 0
lp 7462 0
parport 27682 3 parport_pc,ppdev,lp
fuse 49998 1
nfsd 253350 13
exportfs 3122 1 nfsd
nfs 239914 0
lockd 57299 2 nfsd,nfs
fscache 29818 1 nfs
nfs_acl 2031 2 nfsd,nfs
auth_rpcgss 33428 2 nfsd,nfs
sunrpc 160085 12 nfsd,nfs,lockd,nfs_acl,auth_rpcgss
bridge 39486 0
stp 1440 1 bridge
ext2 52953 1
synaptics_i2c 4112 0
cpufreq_stats 2659 0
cpufreq_userspace 1992 0
cpufreq_conservative 5162 0
cpufreq_powersave 902 0
powernow_k8 10978 0
loop 11623 0
snd_hda_codec_realtek 235074 1
snd_hda_intel 19987 2
snd_hda_codec 53892 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 5220 1 snd_hda_codec
snd_pcm_oss 32415 0
snd_mixer_oss 12478 1 snd_pcm_oss
snd_pcm 60151 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
arc4 1274 2
snd_seq_midi 4256 0
ecb 1841 2
snd_rawmidi 15323 1 snd_seq_midi
snd_seq_midi_event 4628 1 snd_seq_midi
ath5k 112178 0
snd_seq 41281 3 snd_seq_midi,snd_seq_midi_event
mac80211 136924 1 ath5k
ath 8006 1 ath5k
snd_timer 15486 2 snd_pcm,snd_seq
snd_seq_device 4493 3 snd_seq_midi,snd_rawmidi,snd_seq
psmouse 49777 0
cfg80211 101144 3 ath5k,mac80211,ath
i2c_piix4 8328 0
serio_raw 3752 0
snd 45918 16 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
shpchp 26232 0
pcspkr 1699 0
rfkill 13028 1 cfg80211
k8temp 3155 0
soundcore 4566 1 snd
edac_core 29197 0
edac_mce_amd 6433 0
snd_page_alloc 6217 2 snd_hda_intel,snd_pcm
battery 4998 0
wmi 4275 0
ac 2192 0
processor 30239 2 powernow_k8
pci_hotplug 21203 1 shpchp
evdev 7352 20
led_class 2433 1 ath5k
ext3 106326 8
jbd 36861 1 ext3
mbcache 5050 2 ext2,ext3
dm_mod 53434 77
raid10 17665 0
raid456 44260 0
async_raid6_recov 5170 1 raid456
async_pq 3367 2 raid456,async_raid6_recov
raid6_pq 77179 2 async_raid6_recov,async_pq
async_xor 2478 3 raid456,async_raid6_recov,async_pq
xor 4380 1 async_xor
async_memcpy 1198 2 raid456,async_raid6_recov
async_tx 1734 5 raid456,async_raid6_recov,async_pq,async_xor,async_memcpy
raid1 18239 0
raid0 5469 0
multipath 5915 0
linear 3423 0
md_mod 73200 6 raid10,raid456,raid1,raid0,multipath,linear
sg 18632 0
radeon 572689 2
sr_mod 12250 0
ttm 39986 1 radeon
sd_mod 29553 3
crc_t10dif 1276 1 sd_mod
cdrom 28631 1 sr_mod
usbhid 33276 0
drm_kms_helper 20017 1 radeon
ata_generic 2983 0
hid 62825 1 usbhid
ohci_hcd 19212 0
drm 142007 4 radeon,ttm,drm_kms_helper
i2c_algo_bit 4225 1 radeon
pata_atiixp 3489 0
ahci 32310 2
thermal 11610 0
video 17349 0
output 1692 1 video
i2c_core 15328 6 synaptics_i2c,i2c_piix4,radeon,drm_kms_helper,drm,i2c_algo_bit
ehci_hcd 31119 0
libata 133072 3 ata_generic,pata_atiixp,ahci
sky2 40643 0
scsi_mod 121717 4 sg,sr_mod,sd_mod,libata
usbcore 121650 4 usbhid,ohci_hcd,ehci_hcd
nls_base 6377 1 usbcore
thermal_sys 11942 3 processor,thermal,video
button 4650 0
** Network interface configuration:
auto lo
iface lo inet loopback
iface eth0 inet dhcp
auto br0
iface br0 inet dhcp
bridge_maxwait 0
bridge_ports eth0
bridge_stp off
auto br1
iface br1 inet static
bridge_ports none
bridge_stp off
bridge_maxwait 0
address 192.168.4.33
netmask 255.255.255.0
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:1d:72:de:71:bb brd ff:ff:ff:ff:ff:ff
inet6 fe80::21d:72ff:fede:71bb/64 scope link
valid_lft forever preferred_lft forever
3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 00:23:4d:b8:58:aa brd ff:ff:ff:ff:ff:ff
4: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN
link/ether 00:1d:72:de:71:bb brd ff:ff:ff:ff:ff:ff
inet 192.168.2.15/24 brd 192.168.2.255 scope global br0
inet6 fe80::21d:72ff:fede:71bb/64 scope link
valid_lft forever preferred_lft forever
5: br1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN
link/ether 2a:3e:17:17:e9:2a brd ff:ff:ff:ff:ff:ff
inet 192.168.4.33/24 brd 192.168.4.255 scope global br1
inet6 fe80::283e:17ff:fe17:e92a/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 39994 498 0 0 0 0 0 0 39994 498 0 0 0 0 0 0
eth0: 3259686 6843 0 0 0 0 0 0 525228 4824 0 0 0 0 0 0
wlan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
br0: 3160344 6821 0 0 0 0 0 2218 501715 4669 0 0 0 0 0 0
br1: 0 0 0 0 0 0 0 0 58649 385 0 0 0 0 0 0
*** Protocol statistics:
Ip:
5838 total packets received
2 with invalid addresses
0 forwarded
0 incoming packets discarded
5602 incoming packets delivered
5132 requests sent out
86 outgoing packets dropped
Icmp:
92 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 92
92 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 92
IcmpMsg:
InType3: 92
OutType3: 92
Tcp:
134 active connections openings
10 passive connection openings
45 failed connection attempts
13 connection resets received
6 connections established
4263 segments received
3960 segments send out
2 segments retransmited
0 bad segments received.
74 resets sent
Udp:
1210 packets received
92 packets to unknown port received.
0 packet receive errors
1076 packets sent
UdpLite:
TcpExt:
23 TCP sockets finished time wait in fast timer
229 delayed acks sent
1170 packets directly queued to recvmsg prequeue.
1448 bytes directly in process context from backlog
1430743 bytes directly received in process context from prequeue
917 packet headers predicted
939 packets header predicted and directly queued to user
615 acknowledgments not containing data payload received
242 predicted acknowledgments
1 other TCP timeouts
13 connections reset due to early user close
IpExt:
InMcastPkts: 356
OutMcastPkts: 358
InBcastPkts: 234
OutBcastPkts: 63
InOctets: 2921419
OutOctets: 478256
InMcastOctets: 42136
OutMcastOctets: 42326
InBcastOctets: 30289
OutBcastOctets: 10225
*** Device features:
br0: 0x11823
br1: 0xff3865
eth0: 0x10823
lo: 0x13865
wlan0: 0x2000
** PCI devices:
00:00.0 Host bridge [0600]: ATI Technologies Inc RS690 Host Bridge [1002:7910]
Subsystem: Gateway 2000 Device [107b:0185]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 64
00:01.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx) [1002:7912] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00009000-00009fff
Memory behind bridge: fc000000-fc1fffff
Prefetchable memory behind bridge: 00000000f8000000-00000000fbffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:04.0 PCI bridge [0604]: ATI Technologies Inc Device [1002:7914] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=04, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fc300000-fc3fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:05.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 1) [1002:7915] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=05, subordinate=07, sec-latency=0
Memory behind bridge: fc200000-fc2fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:12.0 SATA controller [0106]: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380] (prog-if 01 [AHCI 1.0])
Subsystem: Gateway 2000 Device [107b:0185]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at 8440 [size=8]
Region 1: I/O ports at 8434 [size=4]
Region 2: I/O ports at 8438 [size=8]
Region 3: I/O ports at 8430 [size=4]
Region 4: I/O ports at 8400 [size=16]
Region 5: Memory at fc609000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI0) [1002:4387] (prog-if 10 [OHCI])
Subsystem: Gateway 2000 Device [107b:0185]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fc404000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.1 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI1) [1002:4388] (prog-if 10 [OHCI])
Subsystem: Gateway 2000 Device [107b:0185]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fc405000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI2) [1002:4389] (prog-if 10 [OHCI])
Subsystem: Gateway 2000 Device [107b:0185]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fc406000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.3 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI3) [1002:438a] (prog-if 10 [OHCI])
Subsystem: Gateway 2000 Device [107b:0185]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fc407000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.4 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI4) [1002:438b] (prog-if 10 [OHCI])
Subsystem: Gateway 2000 Device [107b:0185]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fc408000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.5 USB Controller [0c03]: ATI Technologies Inc SB600 USB Controller (EHCI) [1002:4386] (prog-if 20 [EHCI])
Subsystem: Gateway 2000 Device [107b:0185]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 19
Region 0: Memory at fc609400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 14)
Subsystem: Gateway 2000 Device [107b:0185]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: I/O ports at 8410 [size=16]
Capabilities: <access denied>
Kernel driver in use: piix4_smbus
00:14.1 IDE interface [0101]: ATI Technologies Inc SB600 IDE [1002:438c] (prog-if 8a [Master SecP PriP])
Subsystem: Gateway 2000 Device [107b:0185]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 8420 [size=16]
Kernel driver in use: pata_atiixp
00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383]
Subsystem: Gateway 2000 Device [107b:0185]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin ? routed to IRQ 16
Region 0: Memory at fc400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d]
Subsystem: Gateway 2000 Device [107b:0185]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=0b, subordinate=0d, sec-latency=64
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k8temp
01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS690M [Radeon X1200 Series] [1002:791f] (prog-if 00 [VGA controller])
Subsystem: Gateway 2000 Device [107b:0185]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at f8000000 (64-bit, prefetchable) [size=64M]
Region 2: Memory at fc100000 (64-bit, non-prefetchable) [size=64K]
Region 4: I/O ports at 9400 [size=256]
Region 5: Memory at fc000000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: radeon
02:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller [11ab:4354] (rev 13)
Subsystem: Gateway 2000 Device [107b:0185]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 26
Region 0: Memory at fc300000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at a400 [size=256]
Capabilities: <access denied>
Kernel driver in use: sky2
05:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR5001 Wireless Network Adapter [168c:001c] (rev 01)
Subsystem: AMBIT Microsystem Corp. AR5BXB63 802.11bg NIC [1468:0428]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fc200000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath5k
** USB devices:
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 04b3:310b IBM Corp. Red Wheel Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (x86_64)
Kernel: Linux 2.6.32-5-amd64 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii debconf [debconf-2.0] 1.5.35 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.4 tools for generating an initramfs
ii linux-base 2.6.32-23 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-amd64 recommends:
ii firmware-linux-free 2.6.32-23 Binary firmware for various driver
ii libc6-i686 2.11.2-6 Embedded GNU C Library: Shared lib
Versions of packages linux-image-2.6.32-5-amd64 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
ii firmware-linux 0.26 Binary firmware for various driver
ii firmware-linux-nonfree 0.26 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false
linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true
linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/postinst/bootloader-test-error-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/postinst/bootloader-error-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/prerm/would-invalidate-boot-loader-2.6.32-5-amd64: true
linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64:
Reply to: