--- Begin Message ---
Package: linux-2.6
Version: 2.6.35-1~experimental.3
Severity: grave
With the 2.6.35 kernel, suspend and hibernation result is various kind
of issues on a random basis at "exit" time, meaning that sometimes the
suspend/hibernation doesn't put the machine to sleep, but instead I've
gotten:
- 100% CPUs instead of stopping the machine;
- blank screens with nothing able to wake up the machine (not even
sysrqs);
- kernel errors (for hibernation), though for some reason this wasn't
logged to /var/log.
In addition to that, for some reason, when I come back from suspend, my
keyboard mapping in X is lost, which doesn't happen if I boot a .32
kernel.
-- Package-specific info:
** Version:
Linux version 2.6.35-trunk-amd64 (Debian 2.6.35-1~experimental.3) (maks@debian.org) (gcc version 4.4.5 20100902 (prerelease) (Debian 4.4.4-13) ) #1 SMP Mon Sep 6 15:15:26 UTC 2010
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.35-trunk-amd64 root=/dev/mapper/ssd-root ro quiet i915.modeset=1
** Not tainted
** Kernel log:
[ 1788.609537] PM: Saving platform NVS memory
[ 1788.610392] PM: Saving platform NVS memory
[ 1788.611095] Disabling non-boot CPUs ...
[ 1788.716024] CPU 1 is now offline
[ 1788.716026] SMP alternatives: switching to UP code
[ 1788.720681] Extended CMOS year: 2000
[ 1788.720763] PM: Creating hibernation image:
[ 1788.724006] PM: Need to copy 128129 pages
[ 1788.724006] PM: Normal pages needed: 128129 + 1024, available pages: 908063
[ 1788.724006] PM: Restoring platform NVS memory
[ 1788.724006] Extended CMOS year: 2000
[ 1788.724006] Enabling non-boot CPUs ...
[ 1788.724006] SMP alternatives: switching to SMP code
[ 1788.725136] Booting Node 0 Processor 1 APIC 0x1
[ 1788.840807] CPU1 is up
[ 1788.841542] ACPI: Waking up from system sleep state S4
[ 1788.917419] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[ 1788.917434] e1000e 0000:00:19.0: restoring config space at offset 0x6 (was 0x1, writing 0xefe1)
[ 1788.917438] e1000e 0000:00:19.0: restoring config space at offset 0x5 (was 0x0, writing 0xf6adb000)
[ 1788.917443] e1000e 0000:00:19.0: restoring config space at offset 0x4 (was 0x0, writing 0xf6ae0000)
[ 1788.917450] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[ 1788.917634] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[ 1788.918111] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[ 1788.918327] firewire_ohci 0000:03:01.0: proprietary Ricoh MMC controller disabled (via firewire function)
[ 1788.918328] firewire_ohci 0000:03:01.0: MMC cards are now supported by standard SDHCI controller
[ 1788.933015] sdhci-pci 0000:03:01.1: BAR 0: set to [mem 0xf65ff600-0xf65ff6ff] (PCI address [0xf65ff600-0xf65ff6ff]
[ 1788.933041] sdhci-pci 0000:03:01.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804010)
[ 1788.933047] sdhci-pci 0000:03:01.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
[ 1788.933136] PM: early restore of devices complete after 15.789 msecs
[ 1788.966805] i915 0000:00:02.0: setting latency timer to 64
[ 1788.966843] pci0000:00: wake-up capability disabled by ACPI
[ 1788.966848] e1000e 0000:00:19.0: PME# disabled
[ 1788.966923] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 1788.968978] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1788.969003] usb usb2: root hub lost power or was reset
[ 1788.969050] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1788.969087] usb usb3: root hub lost power or was reset
[ 1788.969106] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1788.969143] usb usb4: root hub lost power or was reset
[ 1788.969159] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1788.969180] usb usb1: root hub lost power or was reset
[ 1788.973056] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 1788.973071] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1788.973108] usb usb5: root hub lost power or was reset
[ 1788.973126] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1788.973163] usb usb6: root hub lost power or was reset
[ 1788.973181] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1788.973219] usb usb7: root hub lost power or was reset
[ 1788.973237] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1788.973251] usb usb8: root hub lost power or was reset
[ 1788.977145] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1788.977157] pci 0000:00:1e.0: setting latency timer to 64
[ 1788.977169] ahci 0000:00:1f.2: setting latency timer to 64
[ 1788.977266] iwlagn 0000:0c:00.0: RF_KILL bit toggled to disable radio.
[ 1788.977271] sdhci-pci 0000:03:01.1: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1788.978344] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 1788.978350] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 1788.978385] HDA Intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 1788.978688] sd 0:0:0:0: [sda] Starting disk
[ 1789.066105] firewire_core: skipped bus generations, destroying all nodes
[ 1789.113770] serial 00:09: activated
[ 1789.300048] ata6: SATA link down (SStatus 0 SControl 300)
[ 1789.316047] ata5: SATA link down (SStatus 0 SControl 300)
[ 1789.449034] usb 1-3: reset high speed USB device using ehci_hcd and address 3
[ 1789.464047] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1789.467178] ata1.00: configured for UDMA/100
[ 1789.472042] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1789.511482] ata2.00: configured for UDMA/100
[ 1789.522585] dell-wmi: Received unknown WMI event (0x11)
[ 1789.696037] usb 1-6: reset high speed USB device using ehci_hcd and address 6
[ 1789.911846] firewire_core: rediscovered device fw0
[ 1789.936019] usb 4-1: reset full speed USB device using uhci_hcd and address 2
[ 1790.188066] usb 1-4: reset high speed USB device using ehci_hcd and address 4
[ 1790.231948] dell-wmi: Received unknown WMI event (0x11)
[ 1790.580118] usb 1-3.1: reset low speed USB device using ehci_hcd and address 7
[ 1791.120118] usb 1-4.2: reset low speed USB device using ehci_hcd and address 8
[ 1791.414528] PM: restore of devices complete after 2447.986 msecs
[ 1791.414727] PM: Image restored successfully.
[ 1791.414728] Restarting tasks ...
[ 1791.414779] usb 2-1: USB disconnect, address 2
[ 1791.414781] usb 2-1.1: USB disconnect, address 3
[ 1791.415249] done.
[ 1791.415268] PM: Basic memory bitmaps freed
[ 1791.415271] video LNXVIDEO:01: Restoring backlight state
[ 1791.419828] usb 2-1.2: USB disconnect, address 4
[ 1793.304276] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 1793.360101] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 1793.360673] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1796.373933] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 1796.374356] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1806.656078] eth0: no IPv6 routers present
[ 2059.049409] Registering the dns_resolver key type
[ 2059.095180] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
[ 2059.095196] CIFS VFS: Send error in SessSetup = -13
[ 2059.095215] CIFS VFS: cifs_mount failed w/return code = -13
[ 2077.962749] CIFS VFS: server 192.168.2.2 of type Samba 3.2.5 returned unexpected error on SMB posix open, disabling posix open support. Check if server update available.
[ 2549.717974] lo: Disabled Privacy Extensions
[ 3799.330727] lo: Disabled Privacy Extensions
[ 4223.341128] lo: Disabled Privacy Extensions
[ 7324.890054] lo: Disabled Privacy Extensions
** Model information
sys_vendor: Dell Inc.
product_name: Latitude E6400
product_version:
chassis_vendor: Dell Inc.
chassis_version:
bios_vendor: Dell Inc.
bios_version: A19
board_vendor: Dell Inc.
board_name: 0U692R
board_version:
** Loaded modules:
Module Size Used by
nls_utf8 1357 1
cifs 228177 2
acpi_cpufreq 5893 1
mperf 1499 1 acpi_cpufreq
cpufreq_userspace 2296 0
cpufreq_conservative 9744 0
cpufreq_powersave 1026 0
cpufreq_stats 3052 0
sco 7932 2
bnep 10476 2
rfcomm 31435 0
l2cap 30128 6 bnep,rfcomm
crc16 1659 1 l2cap
bluetooth 49885 6 sco,bnep,rfcomm,l2cap
binfmt_misc 7037 1
kvm_intel 41978 0
kvm 248733 1 kvm_intel
microcode 22533 0
fuse 57953 3
ext3 112373 1
jbd 44134 1 ext3
mbcache 7044 1 ext3
coretemp 5524 0
i2c_dev 5012 0
firewire_sbp2 12277 0
loop 13422 0
snd_hda_codec_intelhdmi 9434 1
snd_hda_codec_idt 53360 1
arc4 1401 2
ecb 1959 2
iwlagn 108002 0
snd_hda_intel 22582 2
iwlcore 95177 1 iwlagn
mac80211 167357 2 iwlagn,iwlcore
snd_hda_codec 84698 3 snd_hda_codec_intelhdmi,snd_hda_codec_idt,snd_hda_intel
snd_hwdep 5938 1 snd_hda_codec
snd_pcm 74040 2 snd_hda_intel,snd_hda_codec
uvcvideo 52022 0
videodev 41850 1 uvcvideo
v4l1_compat 11997 2 uvcvideo,videodev
joydev 9301 0
snd_timer 19068 1 snd_pcm
dell_wmi 2947 0
v4l2_compat_ioctl32 9658 1 videodev
tpm_tis 8758 0
battery 6220 0
tpm 14227 1 tpm_tis
tpm_bios 5425 1 tpm
wmi 8103 1 dell_wmi
cfg80211 135431 3 iwlagn,iwlcore,mac80211
dell_laptop 6242 0
snd 59675 10 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
soundcore 6914 1 snd
psmouse 51060 0
snd_page_alloc 7724 2 snd_hda_intel,snd_pcm
pcspkr 1862 0
ac 2470 0
rfkill 17395 5 bluetooth,cfg80211,dell_laptop
dcdbas 6286 1 dell_laptop
evdev 7833 20
serio_raw 4102 0
i2c_i801 8901 0
processor 32368 3 acpi_cpufreq
xfs 645404 1
exportfs 3602 1 xfs
sha256_generic 9551 2
aes_x86_64 7808 2
aes_generic 27263 1 aes_x86_64
cbc 2689 1
hid_microsoft 2789 0
usbhid 36390 0
hid 69989 2 hid_microsoft,usbhid
dm_crypt 10920 1
dm_mod 62748 9 dm_crypt
btrfs 399431 1
zlib_deflate 19035 1 btrfs
crc32c 2703 1
libcrc32c 1332 1 btrfs
sg 20312 0
sd_mod 32903 4
sr_mod 13230 0
crc_t10dif 1515 1 sd_mod
cdrom 33007 1 sr_mod
i915 276744 2
ahci 20381 0
drm_kms_helper 26939 1 i915
uhci_hcd 19093 0
libahci 20639 4 ahci
sdhci_pci 6919 0
libata 168236 2 ahci,libahci
ehci_hcd 32311 0
drm 180695 3 i915,drm_kms_helper
sdhci 15070 1 sdhci_pci
thermal 13320 0
firewire_ohci 19932 0
scsi_mod 183302 5 firewire_sbp2,sg,sd_mod,sr_mod,libata
i2c_algo_bit 4914 1 i915
mmc_core 58857 1 sdhci
firewire_core 44899 2 firewire_sbp2,firewire_ohci
crc_itu_t 1691 1 firewire_core
led_class 3073 1 sdhci
button 5734 1 i915
i2c_core 22507 7 i2c_dev,videodev,i2c_i801,i915,drm_kms_helper,drm,i2c_algo_bit
e1000e 123562 0
usbcore 151756 5 uvcvideo,usbhid,uhci_hcd,ehci_hcd
video 20623 1 i915
nls_base 8021 3 nls_utf8,cifs,usbcore
thermal_sys 14244 3 processor,thermal,video
output 2271 1 video
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 46
Region 0: Memory at f6c00000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at ef98 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a43] (rev 07)
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f6b00000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:19.0 Ethernet controller [0200]: Intel Corporation 82567LM Gigabit Network Connection [8086:10f5] (rev 03)
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at f6ae0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f6adb000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at efe0 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 6f60 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 6f80 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at 6fa0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 0: Memory at fed1c400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at f6adc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f0200000-f03fffff
Prefetchable memory behind bridge: 00000000f0400000-00000000f05fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f6900000-f69fffff
Prefetchable memory behind bridge: 00000000f0600000-00000000f07fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 [8086:2944] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: f0800000-f09fffff
Prefetchable memory behind bridge: 00000000f0a00000-00000000f0bfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 [8086:2946] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0e, subordinate=0f, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f6600000-f68fffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 6f00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 6f20 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at 6f40 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at fed1c000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Memory behind bridge: f6500000-f65fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M-E LPC Interface Controller [8086:2917] (rev 03)
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation ICH9M/M-E SATA AHCI Controller [8086:2929] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 45
Region 0: I/O ports at 6e70 [size=8]
Region 1: I/O ports at 6e78 [size=4]
Region 2: I/O ports at 6e80 [size=8]
Region 3: I/O ports at 6e88 [size=4]
Region 4: I/O ports at 6ea0 [size=32]
Region 5: Memory at fed1c800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03)
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 0: Memory at f6adaf00 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1100 [size=32]
Kernel driver in use: i801_smbus
03:01.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 04) (prog-if 10 [OHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f65ff800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
03:01.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 21) (prog-if 01)
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f65ff600 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
03:01.2 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller [1180:0843] (rev 11)
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 7
Region 0: Memory at f65ff700 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
0c:00.0 Network controller [0280]: Intel Corporation Ultimate N WiFi Link 5300 [8086:4235]
Subsystem: Intel Corporation Device [8086:1121]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 48
Region 0: Memory at f69fe000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlagn
** USB devices:
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 0a5c:5800 Broadcom Corp. BCM5880 Secure Applications Processor
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 008: ID 413c:3012 Dell Computer Corp. Optical Wheel Mouse
Bus 001 Device 007: ID 045e:00db Microsoft Corp. Natural Ergonomic Keyboard 4000 V1.0
Bus 001 Device 006: ID 0c45:63f1 Microdia Integrated Webcam
Bus 001 Device 004: ID 413c:2513 Dell Computer Corp.
Bus 001 Device 003: ID 413c:2513 Dell Computer Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.35-trunk-amd64 (SMP w/2 CPU cores)
Locale: LANG=C, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.35-trunk-amd64 depends on:
ii debconf [debconf 1.5.35 Debian configuration management sy
pn initramfs-tools <none> (no description available)
ii linux-base 2.6.35-1~experimental.3 Linux image base package
ii module-init-tool 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.35-trunk-amd64 recommends:
ii firmware-linux-free 2.6.32-23 Binary firmware for various driver
Versions of packages linux-image-2.6.35-trunk-amd64 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.35 <none> (no description available)
Versions of packages linux-image-2.6.35-trunk-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
* linux-image-2.6.35-trunk-amd64/postinst/missing-firmware-2.6.35-trunk-amd64:
linux-image-2.6.35-trunk-amd64/postinst/depmod-error-initrd-2.6.35-trunk-amd64: false
linux-image-2.6.35-trunk-amd64/prerm/removing-running-kernel-2.6.35-trunk-amd64: true
linux-image-2.6.35-trunk-amd64/postinst/ignoring-do-bootloader-2.6.35-trunk-amd64:
--- End Message ---
--- Begin Message ---
Version: 2.6.36~rc5.1~experimental.1
On Thu, Sep 30, 2010 at 06:17:31PM +0200, Pierre Habouzit wrote:
> On Thu, Sep 30, 2010 at 02:22:49PM +0200, Bastian Blank wrote:
> > On Thu, Sep 30, 2010 at 09:40:07AM +0200, Pierre Habouzit wrote:
> > > On Wed, Sep 29, 2010 at 03:03:21PM +0200, Bastian Blank wrote:
> > > > > - kernel errors (for hibernation), though for some reason this wasn't
> > > > > logged to /var/log.
> > > > You could use a camera to save them.
> > > Which I hadn't at work when it failed and it's random so…
> >
> > No mobile phone with a camera?
>
> No, not during a staff meeting I couldn't leave.
>
> > > > > In addition to that, for some reason, when I come back from suspend, my
> > > > > keyboard mapping in X is lost, which doesn't happen if I boot a .32
> > > > > kernel.
> > > > Which sort of keyboard mapping? Which Xorg?
> > > setxkbmap one. I have a custome keyboard mapping, and it reverts to
> > > standard 'fr' one on resume for no good reason. The Xorg is just the
> > > unstable default one. which Xorg is probably irelevant as the problem
> > > doesn't happen with a .32
> >
> > That is rather unlikely a bug in the kernel. The kernel does not know
> > about keyboard mappings or so. However a kernel change may have
> > triggered a bug similar to the one fixed in xorg-server/2:1.7.7-4.
>
> Well, it only happens with .35, not with .32, not with .36-rc5, and fwiw
> I'm using 1.7.7-7
Then we can close it as .35 is not the current version in any suite.
Ben.
--
Ben Hutchings
We get into the habit of living before acquiring the habit of thinking.
- Albert Camus
--- End Message ---