Bug#598533: ERROR: Unable to locate IOAPIC for GSI
Package: linux-2.6
Version: 2.6.36~rc5-1~experimental.1
Severity: minor
File: /boot/vmlinuz-2.6.36-rc5-686
During boot I get the following error messages:
[ 0.308439] ERROR: Unable to locate IOAPIC for GSI 4
[ 0.309371] ERROR: Unable to locate IOAPIC for GSI 3
[ 0.310350] ERROR: Unable to locate IOAPIC for GSI 7
[ 0.310522] ERROR: Unable to locate IOAPIC for GSI 13
[ 0.310684] ERROR: Unable to locate IOAPIC for GSI 8
[ 0.310769] ERROR: Unable to locate IOAPIC for GSI 1
[ 0.310847] ERROR: Unable to locate IOAPIC for GSI 12
This is a regression to 2.6.32-5-686, where no such errors were printed
to the console. I did not experience any negative side effects so far
thus I filed it with severity minor only.
Complete dmesg is attached.
Thanks for your work,
Michael
-- Package-specific info:
** Version:
Linux version 2.6.36-rc5-686 (Debian 2.6.36~rc5-1~experimental.1) (ben@decadent.org.uk) (gcc version 4.4.5 20100902 (prerelease) (Debian 4.4.4-13) ) #1 SMP Sat Sep 25 14:49:01 UTC 2010
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.36-rc5-686 root=UUID=9a6d2bd2-58d1-4a75-baff-166b8637e3cc ro quiet
** Not tainted
** Kernel log:
[ 871.756474] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
[ 871.756485] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x305)
[ 871.756498] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x4c01)
[ 871.756510] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
[ 871.756530] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x400, writing 0x405)
[ 871.756548] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xa0000000)
[ 871.756557] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
[ 871.756583] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0xfff0, writing 0x33f03000)
[ 871.756590] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22802020, writing 0x82802020)
[ 871.756629] ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x105)
[ 871.756641] ata_piix 0000:00:1f.1: restoring config space at offset 0x9 (was 0x0, writing 0x34000000)
[ 871.756743] radeon 0000:01:00.0: restoring config space at offset 0x6 (was 0x0, writing 0x90400000)
[ 871.756750] radeon 0000:01:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8008)
[ 871.756756] radeon 0000:01:00.0: restoring config space at offset 0x1 (was 0x2b00083, writing 0x2b00087)
[ 871.756775] firewire_ohci 0000:02:00.0: restoring config space at offset 0xf (was 0x20000100, writing 0x2000010a)
[ 871.756791] firewire_ohci 0000:02:00.0: restoring config space at offset 0x5 (was 0x1, writing 0x2401)
[ 871.756797] firewire_ohci 0000:02:00.0: restoring config space at offset 0x4 (was 0x0, writing 0x90200000)
[ 871.756803] firewire_ohci 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8008)
[ 871.756810] firewire_ohci 0000:02:00.0: restoring config space at offset 0x1 (was 0x2100080, writing 0x2100007)
[ 871.756842] 8139cp 0000:02:01.0: restoring config space at offset 0x1 (was 0x2900007, writing 0x2900017)
[ 871.756860] ipw2200 0000:02:02.0: restoring config space at offset 0xf (was 0x18030100, writing 0x1803010b)
[ 871.756877] ipw2200 0000:02:02.0: restoring config space at offset 0x4 (was 0x0, writing 0x90000000)
[ 871.756883] ipw2200 0000:02:02.0: restoring config space at offset 0x3 (was 0x0, writing 0x8008)
[ 871.756890] ipw2200 0000:02:02.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900006)
[ 871.756908] yenta_cardbus 0000:02:04.0: restoring config space at offset 0xf (was 0x34001ff, writing 0x5c00105)
[ 871.756914] yenta_cardbus 0000:02:04.0: restoring config space at offset 0xe (was 0x0, writing 0x2cfc)
[ 871.756920] yenta_cardbus 0000:02:04.0: restoring config space at offset 0xd (was 0x0, writing 0x2c00)
[ 871.756927] yenta_cardbus 0000:02:04.0: restoring config space at offset 0xc (was 0x0, writing 0x28fc)
[ 871.756933] yenta_cardbus 0000:02:04.0: restoring config space at offset 0xb (was 0x0, writing 0x2800)
[ 871.756939] yenta_cardbus 0000:02:04.0: restoring config space at offset 0xa (was 0x0, writing 0x3bfff000)
[ 871.756945] yenta_cardbus 0000:02:04.0: restoring config space at offset 0x9 (was 0x0, writing 0x38000000)
[ 871.756951] yenta_cardbus 0000:02:04.0: restoring config space at offset 0x8 (was 0x0, writing 0x33fff000)
[ 871.756957] yenta_cardbus 0000:02:04.0: restoring config space at offset 0x7 (was 0x0, writing 0x30000000)
[ 871.756963] yenta_cardbus 0000:02:04.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0060302)
[ 871.756971] yenta_cardbus 0000:02:04.0: restoring config space at offset 0x4 (was 0x0, writing 0x90100000)
[ 871.756977] yenta_cardbus 0000:02:04.0: restoring config space at offset 0x3 (was 0x20000, writing 0x2a810)
[ 871.756984] yenta_cardbus 0000:02:04.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100007)
[ 871.757154] PM: early resume of devices complete after 0.791 msecs
[ 871.757340] pm_op(): pci_pm_resume+0x0/0x60 returns -16
[ 871.757344] PM: Device 0000:00:00.0 failed to resume async: error -16
[ 871.757360] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[C0C2] -> GSI 10 (level, low) -> IRQ 10
[ 871.757367] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 871.757388] usb usb2: root hub lost power or was reset
[ 871.757402] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[C0C5] -> GSI 5 (level, low) -> IRQ 5
[ 871.757408] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 871.757428] usb usb3: root hub lost power or was reset
[ 871.757439] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[C0C4] -> GSI 5 (level, low) -> IRQ 5
[ 871.757446] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 871.757465] usb usb4: root hub lost power or was reset
[ 871.757476] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[C0C9] -> GSI 5 (level, low) -> IRQ 5
[ 871.757483] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 871.757539] pci 0000:00:1e.0: setting latency timer to 64
[ 871.757550] ata_piix 0000:00:1f.1: PCI INT A -> Link[C0C4] -> GSI 5 (level, low) -> IRQ 5
[ 871.757556] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 871.757577] Intel ICH 0000:00:1f.5: PCI INT B -> Link[C0C3] -> GSI 10 (level, low) -> IRQ 10
[ 871.757583] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 871.757610] Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[C0C3] -> GSI 10 (level, low) -> IRQ 10
[ 871.757616] Intel ICH Modem 0000:00:1f.6: setting latency timer to 64
[ 871.760045] radeon 0000:01:00.0: PCI INT A -> Link[C0C2] -> GSI 10 (level, low) -> IRQ 10
[ 871.760053] [drm] AGP mode requested: 4
[ 871.760057] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
[ 871.760069] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
[ 871.760105] radeon 0000:01:00.0: putting AGP V2 device into 4x mode
[ 871.760129] radeon 0000:01:00.0: GTT: 256M 0xB0000000 - 0xBFFFFFFF
[ 871.781625] [drm] radeon: ring at 0x00000000B0000000
[ 871.781653] wlan0: Coming out of suspend...
[ 871.781660] ipw2200 0000:02:02.0: PCI INT A -> Link[C0C5] -> GSI 5 (level, low) -> IRQ 5
[ 871.781678] sd 0:0:0:0: [sda] Starting disk
[ 871.803853] ata2.00: unexpected _GTF length (4)
[ 871.804804] [drm] ring test succeeded in 1 usecs
[ 871.804827] [drm] ib test succeeded in 0 usecs
[ 872.021990] firewire_core: skipped bus generations, destroying all nodes
[ 872.133560] ata2.00: configured for MWDMA2
[ 872.336036] usb 2-1: reset low speed USB device using uhci_hcd and address 2
[ 872.504921] wbsd 00:02: activated
[ 872.512315] serial 00:03: activated
[ 872.514965] parport_pc 00:05: activated
[ 872.520052] firewire_core: rediscovered device fw0
[ 872.548059] i8042 kbd 00:0a: wake-up capability disabled by ACPI
[ 872.884031] usb 2-2: reset low speed USB device using uhci_hcd and address 3
[ 873.284155] usb 4-2: reset full speed USB device using uhci_hcd and address 2
[ 873.455385] btusb 4-2:1.0: no reset_resume for driver btusb?
[ 873.455389] btusb 4-2:1.1: no reset_resume for driver btusb?
[ 873.976309] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 873.976314] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[ 873.976319] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 873.976324] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 873.976453] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
[ 874.002038] ata1.00: configured for UDMA/100
[ 874.026045] ata1.00: configured for UDMA/100
[ 874.026049] ata1: EH complete
[ 874.176135] PM: resume of devices complete after 2418.917 msecs
[ 874.177820] PM: Finishing wakeup.
[ 874.177822] Restarting tasks ... done.
[ 874.199016] video LNXVIDEO:00: Restoring backlight state
[ 874.310064] eth0: link down
[ 874.310338] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 874.311445] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 874.894983] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 884.944033] wlan0: no IPv6 routers present
** Model information
not available
** Loaded modules:
Module Size Used by
michael_mic 1520 4
arc4 1057 2
ecb 1475 2
lib80211_crypt_tkip 6710 1
aes_i586 7176 1
aes_generic 26723 1 aes_i586
lib80211_crypt_ccmp 3643 1
acpi_cpufreq 4969 0
mperf 1179 1 acpi_cpufreq
rfcomm 25684 8
sco 6260 2
ppdev 4724 0
cpufreq_userspace 1703 0
bnep 8125 2
cpufreq_stats 2249 0
l2cap 27133 16 rfcomm,bnep
lp 6372 0
cpufreq_powersave 682 0
cpufreq_conservative 7680 0
fuse 51103 3
binfmt_misc 5348 1
dm_crypt 9216 0
ppp_generic 18058 0
slhc 4214 1 ppp_generic
dm_mod 54817 1 dm_crypt
snd_intel8x0m 8891 0
snd_intel8x0 21959 1
snd_ac97_codec 86008 2 snd_intel8x0m,snd_intel8x0
ac97_bus 902 1 snd_ac97_codec
snd_pcm_oss 28028 0
snd_mixer_oss 10666 1 snd_pcm_oss
snd_pcm 57791 4 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
option 12925 0
btusb 8894 2
usb_wwan 8717 1 option
snd_seq_midi 3990 0
hid_microsoft 1953 0
bluetooth 43719 9 sco,rfcomm,bnep,l2cap,btusb
ipw2200 113275 0
usbhid 28629 0
libipw 21294 1 ipw2200
snd_rawmidi 15692 1 snd_seq_midi
pcmcia 27658 0
hid 55221 2 hid_microsoft,usbhid
cfg80211 112890 2 ipw2200,libipw
snd_seq_midi_event 5101 1 snd_seq_midi
usbserial 26393 2 option,usb_wwan
snd_seq 38564 2 snd_seq_midi,snd_seq_midi_event
sg 16697 0
snd_timer 14801 2 snd_pcm,snd_seq
rfkill 13642 4 bluetooth,cfg80211
lib80211 4594 4 lib80211_crypt_tkip,lib80211_crypt_ccmp,ipw2200,libipw
yenta_socket 16372 0
snd_seq_device 4816 3 snd_seq_midi,snd_rawmidi,snd_seq
sr_mod 11449 0
smsc_ircc2 9925 0
pcmcia_rsrc 8159 1 yenta_socket
cdrom 28526 1 sr_mod
parport_pc 17138 1
pcmcia_core 11790 3 pcmcia,yenta_socket,pcmcia_rsrc
wbsd 9066 0
joydev 7241 0
firewire_ohci 19678 0
8139too 15748 0
irda 85273 1 smsc_ircc2
8139cp 13688 0
firewire_core 40775 1 firewire_ohci
crc_itu_t 1335 1 firewire_core
tpm_tis 6322 0
snd 44352 12 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
mii 3773 2 8139too,8139cp
tpm 11593 1 tpm_tis
container 1998 0
uhci_hcd 16189 0
crc_ccitt 1311 1 irda
i2c_i801 6857 0
tpm_bios 4217 1 tpm
rng_core 2848 0
ehci_hcd 28687 0
serio_raw 3186 0
ac 1846 0
battery 4628 0
parport 26678 3 ppdev,lp,parport_pc
mmc_core 54217 1 wbsd
usbcore 115797 8 option,btusb,usb_wwan,usbhid,usbserial,uhci_hcd,ehci_hcd
shpchp 19659 0
soundcore 5135 1 snd
pcspkr 1318 0
snd_page_alloc 6252 3 snd_intel8x0m,snd_intel8x0,snd_pcm
processor 25572 2 acpi_cpufreq
pci_hotplug 20489 1 shpchp
psmouse 42525 0
evdev 5830 23
nls_base 5877 1 usbcore
autofs4 17427 6
ext4 250795 2
mbcache 5364 1 ext4
jbd2 58514 1 ext4
crc16 1303 2 l2cap,ext4
sd_mod 24807 5
crc_t10dif 1195 1 sd_mod
ata_generic 2323 0
radeon 615212 2
ata_piix 18319 4
ttm 45803 1 radeon
drm_kms_helper 24846 1 radeon
libata 143480 2 ata_generic,ata_piix
drm 151761 4 radeon,ttm,drm_kms_helper
scsi_mod 152804 4 sg,sr_mod,sd_mod,libata
i2c_algo_bit 3806 1 radeon
video 16927 0
thermal 10420 0
thermal_sys 11176 3 processor,video,thermal
i2c_core 18487 5 i2c_i801,radeon,drm_kms_helper,drm,i2c_algo_bit
output 1639 1 video
button 4454 0
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82855PM Processor to I/O Controller [8086:3340] (rev 03)
Subsystem: Compaq Computer Corporation Device [0e11:0860]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at b0000000 (32-bit, prefetchable) [size=256M]
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:01.0 PCI bridge [0604]: Intel Corporation 82855PM Processor to AGP Controller [8086:3341] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: 90400000-904fffff
Prefetchable memory behind bridge: 98000000-9fffffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:1d.0 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 01) (prog-if 00 [UHCI])
Subsystem: Compaq Computer Corporation Device [0e11:0860]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 4: I/O ports at 48c0 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 01) (prog-if 00 [UHCI])
Subsystem: Compaq Computer Corporation Device [0e11:0860]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 5
Region 4: I/O ports at 48e0 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [8086:24c7] (rev 01) (prog-if 00 [UHCI])
Subsystem: Compaq Computer Corporation Device [0e11:0860]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 5
Region 4: I/O ports at 4c00 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [8086:24cd] (rev 01) (prog-if 20 [EHCI])
Subsystem: Compaq Computer Corporation Device [0e11:0860]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 5
Region 0: Memory at a0000000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 81) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=06, sec-latency=32
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 90000000-903fffff
Prefetchable memory behind bridge: 30000000-33ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:1f.0 ISA bridge [0601]: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge [8086:24cc] (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.1 IDE interface [0101]: Intel Corporation 82801DBM (ICH4-M) IDE Controller [8086:24ca] (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Compaq Computer Corporation Device [0e11:0860]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 4c40 [size=16]
Region 5: Memory at 34000000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller [8086:24c3] (rev 01)
Subsystem: Compaq Computer Corporation Device [0e11:0860]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 10
Region 4: I/O ports at 4c20 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 01)
Subsystem: Compaq Computer Corporation Device [0e11:0860]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 10
Region 0: I/O ports at 4000 [size=256]
Region 1: I/O ports at 4880 [size=64]
Region 2: Memory at a0200000 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at a0300000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: Intel ICH
00:1f.6 Modem [0703]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller [8086:24c6] (rev 01) (prog-if 00 [Generic])
Subsystem: Compaq Computer Corporation Device [0e11:0860]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 10
Region 0: I/O ports at 4400 [size=256]
Region 1: I/O ports at 4800 [size=128]
Capabilities: <access denied>
Kernel driver in use: Intel ICH Modem
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon RV250 [Mobility FireGL 9000] [1002:4c66] (rev 01) (prog-if 00 [VGA controller])
Subsystem: Compaq Computer Corporation Device [0e11:0860]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at 98000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 3000 [size=256]
Region 2: Memory at 90400000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at 90420000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
02:00.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev 80) (prog-if 10 [OHCI])
Subsystem: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128 (8000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at 90200000 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at 2400 [size=128]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
02:01.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 20)
Subsystem: Compaq Computer Corporation Device [0e11:0860]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128 (8000ns min, 16000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at 2000 [size=256]
Region 1: Memory at 90300000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: 8139cp
02:02.0 Network controller [0280]: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection [8086:4220] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:12f5]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128 (750ns min, 6000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at 90000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ipw2200
02:04.0 CardBus bridge [0607]: ENE Technology Inc CB1410 Cardbus Controller [1524:1410]
Subsystem: Compaq Computer Corporation Device [0e11:0860]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at 90100000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: 30000000-33fff000 (prefetchable)
Memory window 1: 38000000-3bfff000
I/O window 0: 00002800-000028ff
I/O window 1: 00002c00-00002cff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
** USB devices:
Bus 004 Device 002: ID 049f:0086 Compaq Computer Corp. Bluetooth Device
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 045e:00db Microsoft Corp. Natural Ergonomic Keyboard 4000 V1.0
Bus 002 Device 002: ID 046d:c018 Logitech, Inc. Optical Wheel Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.36-rc5-686 (SMP w/1 CPU core)
Locale: LANG=de_DE.utf8, LC_CTYPE=de_DE.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.36-rc5-686 depends on:
ii debconf [deb 1.5.35 Debian configuration management sy
ii initramfs-to 0.98.4 tools for generating an initramfs
ii linux-base 2.6.36~rc5-1~experimental.1 Linux image base package
ii module-init- 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.36-rc5-686 recommends:
ii firmware-linux-free 2.6.32-23 Binary firmware for various driver
ii libc6-i686 2.11.2-6 Embedded GNU C Library: Shared lib
Versions of packages linux-image-2.6.36-rc5-686 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.36 <none> (no description available)
Versions of packages linux-image-2.6.36-rc5-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
ii firmware-ipw2x00 0.27 Binary firmware for Intel Pro Wire
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
ii firmware-linux 0.27 Binary firmware for various driver
ii firmware-linux-nonfree 0.27 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information excluded
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.36-rc5-686 (Debian 2.6.36~rc5-1~experimental.1) (ben@decadent.org.uk) (gcc version 4.4.5 20100902 (prerelease) (Debian 4.4.4-13) ) #1 SMP Sat Sep 25 14:49:01 UTC 2010
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000002ffd0000 (usable)
[ 0.000000] BIOS-e820: 000000002ffd0000 - 000000002fff0c00 (reserved)
[ 0.000000] BIOS-e820: 000000002fff0c00 - 000000002fffc000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000002fffc000 - 0000000030000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS!
[ 0.000000] DMI 2.3 present.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x2ffd0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CDFFF write-protect
[ 0.000000] CE000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 base 020000000 mask FF0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-000000002ffd0000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 002fc00000 page 2M
[ 0.000000] 002fc00000 - 002ffd0000 page 4k
[ 0.000000] kernel direct mapping tables up to 2ffd0000 @ 7000-c000
[ 0.000000] RAMDISK: 239db000 - 2401c000
[ 0.000000] ACPI: RSDP 000f6560 00014 (v00 COMPAQ)
[ 0.000000] ACPI: RSDT 2fff0c84 0002C (v01 HP CPQ0860 14070520 CPQ 00000001)
[ 0.000000] ACPI: FACP 2fff0c00 00084 (v02 HP CPQ0860 00000002 CPQ 00000001)
[ 0.000000] ACPI: DSDT 2fff0cb0 04F8C (v01 HP nx7000 00010000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 2fffbe80 00040
[ 0.000000] ACPI: SSDT 2fff5c3c 0028A (v01 COMPAQ CPQGysr 00001001 MSFT 0100000E)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 767MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 2ffd0000
[ 0.000000] low ram: 0 - 2ffd0000
[ 0.000000] node 0 low ram: 00000000 - 2ffd0000
[ 0.000000] node 0 bootmap 00008000 - 0000dffc
[ 0.000000] (9/32 early reservations) ==> bootmem [0000000000 - 002ffd0000]
[ 0.000000] #0 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #1 [0001000000 - 0001539ab0] TEXT DATA BSS ==> [0001000000 - 0001539ab0]
[ 0.000000] #2 [00239db000 - 002401c000] RAMDISK ==> [00239db000 - 002401c000]
[ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #4 [000153a000 - 000154013c] BRK ==> [000153a000 - 000154013c]
[ 0.000000] #5 [0000002000 - 0000003000] TRAMPOLINE ==> [0000002000 - 0000003000]
[ 0.000000] #6 [0000003000 - 0000007000] ACPI WAKEUP ==> [0000003000 - 0000007000]
[ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #8 [0000008000 - 000000e000] BOOTMAP ==> [0000008000 - 000000e000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000001 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0002ffd0
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000001 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0002ffd0
[ 0.000000] On node 0 totalpages: 196462
[ 0.000000] free_area_init_node: node 0, pgdat c1417e40, node_mem_map c1542020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3966 pages, LIFO batch:0
[ 0.000000] Normal zone: 1504 pages used for memmap
[ 0.000000] Normal zone: 190960 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 30000000:d0000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @c1c00000 s31360 r0 d21888 u4194304
[ 0.000000] pcpu-alloc: s31360 r0 d21888 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 194926
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.36-rc5-686 root=UUID=9a6d2bd2-58d1-4a75-baff-166b8637e3cc ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 767024k/786240k available (2564k kernel code, 18824k reserved, 1660k data, 384k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf07d0000 - 0xff7fe000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xeffd0000 ( 767 MB)
[ 0.000000] .init : 0xc1421000 - 0xc1481000 ( 384 kB)
[ 0.000000] .data : 0xc12813e4 - 0xc14206f0 (1660 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12813e4 (2564 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1594.771 MHz processor.
[ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3189.54 BogoMIPS (lpj=6379084)
[ 0.004011] pid_max: default: 32768 minimum: 301
[ 0.004035] Security Framework initialized
[ 0.004042] SELinux: Disabled at boot.
[ 0.004055] Mount-cache hash table entries: 512
[ 0.004216] Initializing cgroup subsys ns
[ 0.004221] Initializing cgroup subsys cpuacct
[ 0.004227] Initializing cgroup subsys devices
[ 0.004230] Initializing cgroup subsys freezer
[ 0.004233] Initializing cgroup subsys net_cls
[ 0.004236] Initializing cgroup subsys blkio
[ 0.004283] mce: CPU supports 5 MCE banks
[ 0.004302] Performance Events:
[ 0.004305] no APIC, boot with the "lapic" boot parameter to force-enable it.
[ 0.004308] no hardware sampling interrupt available.
[ 0.004311] p6 PMU driver.
[ 0.004318] ... version: 0
[ 0.004321] ... bit width: 32
[ 0.004323] ... generic registers: 2
[ 0.004325] ... value mask: 00000000ffffffff
[ 0.004328] ... max period: 000000007fffffff
[ 0.004331] ... fixed-purpose events: 0
[ 0.004333] ... event mask: 0000000000000003
[ 0.004814] SMP alternatives: switching to UP code
[ 0.009753] Freeing SMP alternatives: 16k freed
[ 0.009759] ACPI: Core revision 20100702
[ 0.017955] ACPI: setting ELCR to 0200 (from 0c20)
[ 0.020073] weird, boot CPU (#0) not listed by the BIOS.
[ 0.020075] SMP motherboard not detected.
[ 0.020078] Local APIC not detected. Using dummy APIC emulation.
[ 0.020081] SMP disabled
[ 0.020439] Brought up 1 CPUs
[ 0.020442] Total of 1 processors activated (3189.54 BogoMIPS).
[ 0.021524] devtmpfs: initialized
[ 0.021973] regulator: core version 0.5
[ 0.022027] NET: Registered protocol family 16
[ 0.022146] ACPI: bus type pci registered
[ 0.024234] PCI: PCI BIOS revision 2.10 entry at 0xf031f, last bus=3
[ 0.024237] PCI: Using configuration type 1 for base access
[ 0.024732] bio: create slab <bio-0> at 0
[ 0.025802] ACPI: EC: Look up EC in DSDT
[ 0.036234] ACPI: EC: GPE storm detected, transactions will use polling mode
[ 0.196016] ACPI: Interpreter enabled
[ 0.196022] ACPI: (supports S0 S3 S4 S5)
[ 0.196046] ACPI: Using PIC for interrupt routing
[ 0.271811] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.271927] ACPI: Power Resource [C18D] (on)
[ 0.272032] ACPI: Power Resource [C195] (on)
[ 0.272116] ACPI: Power Resource [C19C] (on)
[ 0.272138] ACPI: Power Resource [C1A6] (on)
[ 0.272338] ACPI: No dock devices found.
[ 0.272344] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.278218] ACPI: PCI Root Bridge [C046] (domain 0000 [bus 00-ff])
[ 0.289960] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.289964] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.289969] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.289973] pci_root PNP0A03:00: host bridge window [mem 0x30000000-0xfec00fff] (ignored)
[ 0.289977] pci_root PNP0A03:00: host bridge window [mem 0xfec02000-0xffffffff] (ignored)
[ 0.289981] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[ 0.290002] pci 0000:00:00.0: reg 10: [mem 0xb0000000-0xbfffffff pref]
[ 0.290139] pci 0000:00:1d.0: reg 20: [io 0x48c0-0x48df]
[ 0.290214] pci 0000:00:1d.1: reg 20: [io 0x48e0-0x48ff]
[ 0.290288] pci 0000:00:1d.2: reg 20: [io 0x4c00-0x4c1f]
[ 0.290353] pci 0000:00:1d.7: reg 10: [mem 0xa0000000-0xa00003ff]
[ 0.290432] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.290438] pci 0000:00:1d.7: PME# disabled
[ 0.290558] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH4 ACPI/GPIO/TCO
[ 0.290564] pci 0000:00:1f.0: quirk: [io 0x1100-0x113f] claimed by ICH4 GPIO
[ 0.290591] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.290602] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.290612] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.290623] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.290634] pci 0000:00:1f.1: reg 20: [io 0x4c40-0x4c4f]
[ 0.290645] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
[ 0.290715] pci 0000:00:1f.3: reg 20: [io 0x4c20-0x4c3f]
[ 0.290764] pci 0000:00:1f.5: reg 10: [io 0x4000-0x40ff]
[ 0.290775] pci 0000:00:1f.5: reg 14: [io 0x4880-0x48bf]
[ 0.290785] pci 0000:00:1f.5: reg 18: [mem 0xa0200000-0xa02001ff]
[ 0.290795] pci 0000:00:1f.5: reg 1c: [mem 0xa0300000-0xa03000ff]
[ 0.290833] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ 0.290838] pci 0000:00:1f.5: PME# disabled
[ 0.290868] pci 0000:00:1f.6: reg 10: [io 0x4400-0x44ff]
[ 0.290879] pci 0000:00:1f.6: reg 14: [io 0x4800-0x487f]
[ 0.290930] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.290935] pci 0000:00:1f.6: PME# disabled
[ 0.290973] pci 0000:01:00.0: reg 10: [mem 0x98000000-0x9fffffff pref]
[ 0.290982] pci 0000:01:00.0: reg 14: [io 0x3000-0x30ff]
[ 0.290990] pci 0000:01:00.0: reg 18: [mem 0x90400000-0x9040ffff]
[ 0.291015] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.291035] pci 0000:01:00.0: supports D1 D2
[ 0.291069] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.291073] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.291078] pci 0000:00:01.0: bridge window [mem 0x90400000-0x904fffff]
[ 0.291083] pci 0000:00:01.0: bridge window [mem 0x98000000-0x9fffffff pref]
[ 0.291122] pci 0000:02:00.0: reg 10: [mem 0x90200000-0x902007ff]
[ 0.291133] pci 0000:02:00.0: reg 14: [io 0x2400-0x247f]
[ 0.291188] pci 0000:02:00.0: supports D2
[ 0.291192] pci 0000:02:00.0: PME# supported from D2 D3hot D3cold
[ 0.291197] pci 0000:02:00.0: PME# disabled
[ 0.291229] pci 0000:02:01.0: reg 10: [io 0x2000-0x20ff]
[ 0.291240] pci 0000:02:01.0: reg 14: [mem 0x90300000-0x903000ff]
[ 0.291294] pci 0000:02:01.0: supports D1 D2
[ 0.291297] pci 0000:02:01.0: PME# supported from D1 D2 D3hot D3cold
[ 0.291302] pci 0000:02:01.0: PME# disabled
[ 0.291334] pci 0000:02:02.0: reg 10: [mem 0x90000000-0x90000fff]
[ 0.291396] pci 0000:02:02.0: PME# supported from D0 D3hot D3cold
[ 0.291401] pci 0000:02:02.0: PME# disabled
[ 0.291434] pci 0000:02:04.0: reg 10: [mem 0x90100000-0x90100fff]
[ 0.291453] pci 0000:02:04.0: supports D1 D2
[ 0.291456] pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.291462] pci 0000:02:04.0: PME# disabled
[ 0.291499] pci 0000:00:1e.0: PCI bridge to [bus 02-03] (subtractive decode)
[ 0.291505] pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff]
[ 0.291510] pci 0000:00:1e.0: bridge window [mem 0x90000000-0x903fffff]
[ 0.291517] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.291521] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.291525] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.291561] pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-03]
[ 0.291574] pci_bus 0000:00: on NUMA node 0
[ 0.291578] ACPI: PCI Interrupt Routing Table [\_SB_.C046._PRT]
[ 0.291639] ACPI: PCI Interrupt Routing Table [\_SB_.C046.C047._PRT]
[ 0.291663] ACPI: PCI Interrupt Routing Table [\_SB_.C046.C058._PRT]
[ 0.300565] ACPI: PCI Interrupt Link [C0C2] (IRQs 5 *10)
[ 0.300713] ACPI: PCI Interrupt Link [C0C3] (IRQs 5 *10)
[ 0.300857] ACPI: PCI Interrupt Link [C0C4] (IRQs *5 10)
[ 0.301000] ACPI: PCI Interrupt Link [C0C5] (IRQs *5 10)
[ 0.301131] ACPI: PCI Interrupt Link [C0C6] (IRQs 5 10) *0, disabled.
[ 0.301276] ACPI: PCI Interrupt Link [C0C7] (IRQs 5 10) *11
[ 0.301408] ACPI: PCI Interrupt Link [C0C8] (IRQs 5 10) *0, disabled.
[ 0.301553] ACPI: PCI Interrupt Link [C0C9] (IRQs *5 10)
[ 0.301615] HEST: Table is not found!
[ 0.301687] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.301692] vgaarb: loaded
[ 0.301769] PCI: Using ACPI for IRQ routing
[ 0.301774] PCI: pci_cache_line_size set to 64 bytes
[ 0.301836] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.301840] reserve RAM buffer: 000000002ffd0000 - 000000002fffffff
[ 0.301980] Switching to clocksource tsc
[ 0.303321] pnp: PnP ACPI init
[ 0.303338] ACPI: bus type pnp registered
[ 0.308439] ERROR: Unable to locate IOAPIC for GSI 4
[ 0.309371] ERROR: Unable to locate IOAPIC for GSI 3
[ 0.310350] ERROR: Unable to locate IOAPIC for GSI 7
[ 0.310522] ERROR: Unable to locate IOAPIC for GSI 13
[ 0.310684] ERROR: Unable to locate IOAPIC for GSI 8
[ 0.310769] ERROR: Unable to locate IOAPIC for GSI 1
[ 0.310847] ERROR: Unable to locate IOAPIC for GSI 12
[ 0.311866] pnp: PnP ACPI: found 15 devices
[ 0.311869] ACPI: ACPI bus type pnp unregistered
[ 0.311873] PnPBIOS: Disabled by ACPI PNP
[ 0.311889] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.311894] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.311898] system 00:00: [mem 0x00100000-0x2fffffff] could not be reserved
[ 0.311909] system 00:0c: [io 0x0140-0x014f] has been reserved
[ 0.311914] system 00:0c: [io 0x0200-0x020f] has been reserved
[ 0.311918] system 00:0c: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.311922] system 00:0c: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.311929] system 00:0d: [io 0x04d0-0x04d1] has been reserved
[ 0.311933] system 00:0d: [io 0x1000-0x107f] has been reserved
[ 0.311937] system 00:0d: [io 0x1100-0x113f] has been reserved
[ 0.311941] system 00:0d: [io 0x1200-0x121f] has been reserved
[ 0.311946] system 00:0d: [mem 0xfec00000-0xfec000ff] has been reserved
[ 0.311953] system 00:0e: [mem 0xfec01000-0xfec01fff] has been reserved
[ 0.348597] pci 0000:00:1e.0: BAR 15: assigned [mem 0x30000000-0x33ffffff pref]
[ 0.348602] pci 0000:00:1f.1: BAR 5: assigned [mem 0x34000000-0x340003ff]
[ 0.348610] pci 0000:00:1f.1: BAR 5: set to [mem 0x34000000-0x340003ff] (PCI address [0x34000000-0x340003ff]
[ 0.348616] pci 0000:01:00.0: BAR 6: assigned [mem 0x90420000-0x9043ffff pref]
[ 0.348620] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.348624] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.348630] pci 0000:00:01.0: bridge window [mem 0x90400000-0x904fffff]
[ 0.348635] pci 0000:00:01.0: bridge window [mem 0x98000000-0x9fffffff pref]
[ 0.348642] pci 0000:02:04.0: BAR 15: assigned [mem 0x30000000-0x33ffffff pref]
[ 0.348647] pci 0000:02:04.0: BAR 16: assigned [mem 0x38000000-0x3bffffff]
[ 0.348651] pci 0000:02:04.0: BAR 13: assigned [io 0x2800-0x28ff]
[ 0.348655] pci 0000:02:04.0: BAR 14: assigned [io 0x2c00-0x2cff]
[ 0.348658] pci 0000:02:04.0: CardBus bridge to [bus 03-06]
[ 0.348662] pci 0000:02:04.0: bridge window [io 0x2800-0x28ff]
[ 0.348667] pci 0000:02:04.0: bridge window [io 0x2c00-0x2cff]
[ 0.348673] pci 0000:02:04.0: bridge window [mem 0x30000000-0x33ffffff pref]
[ 0.348679] pci 0000:02:04.0: bridge window [mem 0x38000000-0x3bffffff]
[ 0.348684] pci 0000:00:1e.0: PCI bridge to [bus 02-03]
[ 0.348689] pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff]
[ 0.348695] pci 0000:00:1e.0: bridge window [mem 0x90000000-0x903fffff]
[ 0.348701] pci 0000:00:1e.0: bridge window [mem 0x30000000-0x33ffffff pref]
[ 0.348721] pci 0000:00:1e.0: setting latency timer to 64
[ 0.348949] ACPI: PCI Interrupt Link [C0C4] enabled at IRQ 5
[ 0.348952] PCI: setting IRQ 5 as level-triggered
[ 0.348959] pci 0000:02:04.0: PCI INT A -> Link[C0C4] -> GSI 5 (level, low) -> IRQ 5
[ 0.348966] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.348970] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.348974] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.348977] pci_bus 0000:01: resource 1 [mem 0x90400000-0x904fffff]
[ 0.348981] pci_bus 0000:01: resource 2 [mem 0x98000000-0x9fffffff pref]
[ 0.348985] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.348989] pci_bus 0000:02: resource 1 [mem 0x90000000-0x903fffff]
[ 0.348992] pci_bus 0000:02: resource 2 [mem 0x30000000-0x33ffffff pref]
[ 0.348996] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
[ 0.349000] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[ 0.349004] pci_bus 0000:03: resource 0 [io 0x2800-0x28ff]
[ 0.349007] pci_bus 0000:03: resource 1 [io 0x2c00-0x2cff]
[ 0.349011] pci_bus 0000:03: resource 2 [mem 0x30000000-0x33ffffff pref]
[ 0.349014] pci_bus 0000:03: resource 3 [mem 0x38000000-0x3bffffff]
[ 0.349065] NET: Registered protocol family 2
[ 0.349147] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.349517] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.351383] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.352525] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.352530] TCP reno registered
[ 0.352537] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.352578] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.352798] NET: Registered protocol family 1
[ 0.352929] pci 0000:01:00.0: Boot video device
[ 0.352946] PCI: CLS 32 bytes, default 64
[ 0.353031] Unpacking initramfs...
[ 0.613851] Freeing initrd memory: 6404k freed
[ 0.624995] audit: initializing netlink socket (disabled)
[ 0.625019] type=2000 audit(1285793151.620:1): initialized
[ 0.655099] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.657240] VFS: Disk quotas dquot_6.5.2
[ 0.657328] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.657450] msgmni has been set to 1510
[ 0.657728] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.657733] io scheduler noop registered
[ 0.657735] io scheduler deadline registered
[ 0.657754] io scheduler cfq registered (default)
[ 0.658020] ERST: Table is not found!
[ 0.658034] isapnp: Scanning for PnP cards...
[ 1.011712] isapnp: No Plug & Play device found
[ 1.011946] Linux agpgart interface v0.103
[ 1.012087] agpgart-intel 0000:00:00.0: Intel 855PM Chipset
[ 1.025514] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
[ 1.025605] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.045931] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.066294] serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
[ 1.086763] 00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.087255] ACPI: PCI Interrupt Link [C0C3] enabled at IRQ 10
[ 1.087259] PCI: setting IRQ 10 as level-triggered
[ 1.087266] serial 0000:00:1f.6: PCI INT B -> Link[C0C3] -> GSI 10 (level, low) -> IRQ 10
[ 1.087275] serial 0000:00:1f.6: PCI INT B disabled
[ 1.087411] PNP: PS/2 Controller [PNP0303:C1A3,PNP0f13:C1A4] at 0x60,0x64 irq 1,12
[ 1.096430] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 1.103150] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.103161] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.103198] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.103231] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.103259] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.103390] mice: PS/2 mouse device common for all mice
[ 1.103659] rtc_cmos 00:09: RTC can wake from S4
[ 1.103713] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
[ 1.103735] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 1.103748] cpuidle: using governor ladder
[ 1.103751] cpuidle: using governor menu
[ 1.104131] TCP cubic registered
[ 1.104316] NET: Registered protocol family 10
[ 1.104809] lo: Disabled Privacy Extensions
[ 1.105102] Mobile IPv6
[ 1.105106] NET: Registered protocol family 17
[ 1.105111] Registering the dns_resolver key type
[ 1.105132] Using IPI No-Shortcut mode
[ 1.105233] PM: Resume from disk failed.
[ 1.105247] registered taskstats version 1
[ 1.105492] rtc_cmos 00:09: setting system clock to 2010-09-29 20:45:52 UTC (1285793152)
[ 1.105522] Initalizing network drop monitor service
[ 1.105578] Freeing unused kernel memory: 384k freed
[ 1.105857] Write protecting the kernel text: 2568k
[ 1.105892] Write protecting the kernel read-only data: 1304k
[ 1.126924] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.184170] udev: starting version 161
[ 1.184225] udevd (48): /proc/48/oom_adj is deprecated, please use /proc/48/oom_score_adj instead.
[ 1.433278] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 1.433292] ACPI: Power Button [C1BE]
[ 1.433406] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 1.433510] ACPI: Lid Switch [C136]
[ 1.433588] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.433593] ACPI: Power Button [PWRF]
[ 1.469290] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:00/LNXVIDEO:00/input/input4
[ 1.469303] ACPI: Video Device [C0D0] (multi-head: yes rom: no post: no)
[ 1.548743] SCSI subsystem initialized
[ 1.595078] [drm] Initialized drm 1.1.0 20060810
[ 1.625838] libata version 3.00 loaded.
[ 1.637193] ata_piix 0000:00:1f.1: version 2.13
[ 1.637217] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[ 1.637230] ata_piix 0000:00:1f.1: PCI INT A -> Link[C0C4] -> GSI 5 (level, low) -> IRQ 5
[ 1.637301] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.644195] scsi0 : ata_piix
[ 1.644470] scsi1 : ata_piix
[ 1.645333] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x4c40 irq 14
[ 1.645337] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x4c48 irq 15
[ 1.685143] [drm] radeon kernel modesetting enabled.
[ 1.685484] ACPI: PCI Interrupt Link [C0C2] enabled at IRQ 10
[ 1.685492] radeon 0000:01:00.0: PCI INT A -> Link[C0C2] -> GSI 10 (level, low) -> IRQ 10
[ 1.689952] [drm] initializing kernel modesetting (RV250 0x1002:0x4C66).
[ 1.690068] [drm] register mmio base: 0x90400000
[ 1.690070] [drm] register mmio size: 65536
[ 1.691554] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
[ 1.691575] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
[ 1.691614] radeon 0000:01:00.0: putting AGP V2 device into 4x mode
[ 1.691640] radeon 0000:01:00.0: GTT: 256M 0xB0000000 - 0xBFFFFFFF
[ 1.691650] radeon 0000:01:00.0: VRAM: 64M 0x98000000 - 0x9BFFFFFF (64M used)
[ 1.691689] [drm] radeon: irq initialized.
[ 1.692567] [drm] Detected VRAM RAM=64M, BAR=128M
[ 1.692571] [drm] RAM width 128bits DDR
[ 1.692655] [TTM] Zone kernel: Available graphics memory: 386914 kiB.
[ 1.692658] [TTM] Initializing pool allocator.
[ 1.692687] [drm] radeon: 64M of VRAM memory ready
[ 1.692690] [drm] radeon: 256M of GTT memory ready.
[ 1.693174] [drm] Loading R200 Microcode
[ 1.699045] [drm] radeon: ring at 0x00000000B0000000
[ 1.699069] [drm] ring test succeeded in 1 usecs
[ 1.699335] [drm] radeon: ib pool ready.
[ 1.699429] [drm] ib test succeeded in 0 usecs
[ 1.699668] [drm] Panel ID String: SEC
[ 1.699671] [drm] Panel Size 1680x1050
[ 1.699715] [drm] Default TV standard: NTSC
[ 1.699717] [drm] 27.000000000 MHz TV ref clk
[ 1.699719] [drm] No TV DAC info found in BIOS
[ 1.699723] [drm] Default TV standard: NTSC
[ 1.699725] [drm] 27.000000000 MHz TV ref clk
[ 1.699760] [drm] Radeon Display Connectors
[ 1.699763] [drm] Connector 0:
[ 1.699765] [drm] VGA
[ 1.699768] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 1.699770] [drm] Encoders:
[ 1.699773] [drm] CRT1: INTERNAL_DAC1
[ 1.699775] [drm] Connector 1:
[ 1.699777] [drm] LVDS
[ 1.699780] [drm] DDC: 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c
[ 1.699782] [drm] Encoders:
[ 1.699785] [drm] LCD1: INTERNAL_LVDS
[ 1.699787] [drm] Connector 2:
[ 1.699789] [drm] S-video
[ 1.699790] [drm] Encoders:
[ 1.699792] [drm] TV1: INTERNAL_DAC2
[ 1.705259] [drm] radeon: power management initialized
[ 1.777082] [drm] fb mappable at 0x98040000
[ 1.777085] [drm] vram apper at 0x98000000
[ 1.777088] [drm] size 7057408
[ 1.777090] [drm] fb depth is 24
[ 1.777092] [drm] pitch is 6720
[ 1.851547] Console: switching to colour frame buffer device 210x65
[ 1.852447] ata2.00: ATAPI: HL-DT-ST DVD+RW GCA-4040N, 1.15, max MWDMA2
[ 1.893380] fb0: radeondrmfb frame buffer device
[ 1.893383] drm: registered panic notifier
[ 1.893394] ata1.00: ATA-8: SAMSUNG HM160HC, LQ100-10, max UDMA/100
[ 1.893398] ata1.00: 312581808 sectors, multi 16: LBA48
[ 1.893800] [drm] Initialized radeon 2.6.0 20080528 for 0000:01:00.0 on minor 0
[ 1.900367] ata2.00: configured for MWDMA2
[ 1.902234] ata1.00: configured for UDMA/100
[ 1.902402] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM160HC LQ10 PQ: 0 ANSI: 5
[ 1.903475] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+RW GCA-4040N 1.15 PQ: 0 ANSI: 5
[ 1.927249] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.927318] sd 0:0:0:0: [sda] Write Protect is off
[ 1.927322] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.927350] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.064942] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 > sda3
[ 2.065941] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.891823] PM: Starting manual resume from disk
[ 2.891829] PM: Resume from partition 8:5
[ 2.891831] PM: Checking hibernation image.
[ 2.892067] PM: Error -22 checking image file
[ 2.892070] PM: Resume from disk failed.
[ 2.979188] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 3.723366] init[1]: systemd 10 running in system mode. (+PAM +LIBWRAP -AUDIT +SELINUX +SYSVINIT; debian)
[ 4.001155] init[1]: Set hostname to <pluto>.
[ 5.261538] init[1]: x11-common.service lacks ExecStart setting. Refusing.
[ 16.270228] udev: starting version 161
[ 16.673914] ACPI: acpi_idle registered with cpuidle
[ 16.674079] Marking TSC unstable due to TSC halts in idle
[ 16.675745] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 16.683876] Switching to clocksource acpi_pm
[ 16.695049] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 16.737998] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 16.962275] usbcore: registered new interface driver usbfs
[ 16.962454] usbcore: registered new interface driver hub
[ 16.966729] usbcore: registered new device driver usb
[ 16.976963] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 16.977289] ACPI: PCI Interrupt Link [C0C9] enabled at IRQ 5
[ 16.977296] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[C0C9] -> GSI 5 (level, low) -> IRQ 5
[ 16.977346] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 16.977351] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 16.977392] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 16.977431] ehci_hcd 0000:00:1d.7: debug port 1
[ 16.981327] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 17.014842] ehci_hcd 0000:00:1d.7: irq 5, io mem 0xa0000000
[ 17.035657] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 17.035729] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 17.035733] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 17.035736] usb usb1: Product: EHCI Host Controller
[ 17.035739] usb usb1: Manufacturer: Linux 2.6.36-rc5-686 ehci_hcd
[ 17.035743] usb usb1: SerialNumber: 0000:00:1d.7
[ 17.037879] hub 1-0:1.0: USB hub found
[ 17.037890] hub 1-0:1.0: 6 ports detected
[ 17.071214] i801_smbus 0000:00:1f.3: PCI INT B -> Link[C0C3] -> GSI 10 (level, low) -> IRQ 10
[ 17.163030] uhci_hcd: USB Universal Host Controller Interface driver
[ 17.163145] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[C0C2] -> GSI 10 (level, low) -> IRQ 10
[ 17.163161] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 17.163166] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 17.163189] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 17.163225] uhci_hcd 0000:00:1d.0: irq 10, io base 0x000048c0
[ 17.163278] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 17.163282] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 17.163285] usb usb2: Product: UHCI Host Controller
[ 17.163289] usb usb2: Manufacturer: Linux 2.6.36-rc5-686 uhci_hcd
[ 17.163292] usb usb2: SerialNumber: 0000:00:1d.0
[ 17.165376] hub 2-0:1.0: USB hub found
[ 17.165385] hub 2-0:1.0: 2 ports detected
[ 17.165741] ACPI: PCI Interrupt Link [C0C5] enabled at IRQ 5
[ 17.165747] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[C0C5] -> GSI 5 (level, low) -> IRQ 5
[ 17.165756] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 17.165760] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 17.165772] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 17.165798] uhci_hcd 0000:00:1d.1: irq 5, io base 0x000048e0
[ 17.165842] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 17.165846] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 17.165849] usb usb3: Product: UHCI Host Controller
[ 17.165852] usb usb3: Manufacturer: Linux 2.6.36-rc5-686 uhci_hcd
[ 17.165855] usb usb3: SerialNumber: 0000:00:1d.1
[ 17.169557] hub 3-0:1.0: USB hub found
[ 17.169565] hub 3-0:1.0: 2 ports detected
[ 17.169666] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[C0C4] -> GSI 5 (level, low) -> IRQ 5
[ 17.169677] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 17.169681] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 17.169691] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 17.169717] uhci_hcd 0000:00:1d.2: irq 5, io base 0x00004c00
[ 17.169759] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 17.169763] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 17.169766] usb usb4: Product: UHCI Host Controller
[ 17.169769] usb usb4: Manufacturer: Linux 2.6.36-rc5-686 uhci_hcd
[ 17.169773] usb usb4: SerialNumber: 0000:00:1d.2
[ 17.169810] audit: name_count maxed, losing inode data: dev=00:05, inode=3322
[ 17.169815] audit: name_count maxed, losing inode data: dev=00:05, inode=3322
[ 17.169821] audit: name_count maxed, losing inode data: dev=00:05, inode=3322
[ 17.171354] hub 4-0:1.0: USB hub found
[ 17.171360] hub 4-0:1.0: 2 ports detected
[ 17.436480] ACPI: Battery Slot [C11F] (battery present)
[ 17.437334] ACPI: AC Adapter [C134] (on-line)
[ 17.465553] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x236eb3, caps: 0x904713/0x10008/0x0
[ 17.518475] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
[ 17.576128] usb 2-1: new low speed USB device using uhci_hcd and address 2
[ 17.600384] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 17.600476] 8139cp 0000:02:01.0: PCI INT A -> Link[C0C3] -> GSI 10 (level, low) -> IRQ 10
[ 17.609251] 8139cp 0000:02:01.0: eth0: RTL-8139C+ at 0xf1a8a000, 00:02:3f:65:9b:85, IRQ 10
[ 17.686718] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 17.696956] firewire_ohci 0000:02:00.0: PCI INT A -> Link[C0C2] -> GSI 10 (level, low) -> IRQ 10
[ 17.727905] NET: Registered protocol family 23
[ 17.755188] usb 2-1: New USB device found, idVendor=046d, idProduct=c018
[ 17.755193] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 17.755197] usb 2-1: Product: USB Optical Mouse
[ 17.755200] usb 2-1: Manufacturer: Logitech
[ 17.763613] firewire_ohci: Added fw-ohci device 0000:02:00.0, OHCI v1.0, 4 IR + 8 IT contexts, quirks 0x1
[ 17.766291] wbsd: Winbond W83L51xD SD/MMC card interface driver
[ 17.766295] wbsd: Copyright(c) Pierre Ossman
[ 17.767015] wbsd 00:02: activated
[ 17.827170] mmc0: W83L51xD id 7112 at 0x248 irq 6 dma 0 PnP
[ 17.831247] parport_pc 00:05: reported by Plug and Play ACPI
[ 17.831306] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 17.865430] intel_rng: FWH not detected
[ 17.912745] Detected unconfigured Compaq x1000 family SMSC IrDA chip, pre-configuring device.
[ 17.912750] Setting up Intel 82801 controller and SMSC device
[ 17.912883] found SMC SuperIO Chip (devid=0x5a rev=00 base=0x002e): LPC47N227
[ 17.912900] smsc_superio_flat(): fir: 0x2f8, sir: 0x2e8, dma: 03, irq: 7, mode: 0x0e
[ 17.912916] SMsC IrDA Controller found
[ 17.912917] IrCC version 2.0, firport 0x2f8, sirport 0x2e8 dma=3, irq=7
[ 17.912988] No transceiver found. Defaulting to Fast pin select
[ 17.934356] IrDA: Registered device irda0
[ 17.955115] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 17.955122] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 17.955843] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 18.000081] usb 2-2: new low speed USB device using uhci_hcd and address 3
[ 18.052368] yenta_cardbus 0000:02:04.0: CardBus bridge found [0e11:0860]
[ 18.052389] yenta_cardbus 0000:02:04.0: Using CSCINT to route CSC interrupts to PCI
[ 18.052393] yenta_cardbus 0000:02:04.0: Routing CardBus interrupts to PCI
[ 18.052399] yenta_cardbus 0000:02:04.0: TI: mfunc 0x001c1112, devctl 0x44
[ 18.069389] lib80211: common routines for IEEE802.11 drivers
[ 18.069395] lib80211_crypt: registered algorithm 'NULL'
[ 18.159321] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 18.160744] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 18.182207] usb 2-2: New USB device found, idVendor=045e, idProduct=00db
[ 18.182212] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 18.182216] usb 2-2: Product: Natural® Ergonomic Keyboard 4000
[ 18.182219] usb 2-2: Manufacturer: Microsoft
[ 18.264226] firewire_core: created device fw0: GUID 00023f3938002bd3, S400
[ 18.284664] yenta_cardbus 0000:02:04.0: ISA IRQ mask 0x0818, PCI irq 5
[ 18.284669] yenta_cardbus 0000:02:04.0: Socket status: 30000006
[ 18.284675] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
[ 18.284690] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [io 0x2000-0x2fff]
[ 18.284695] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x2fff: excluding 0x2000-0x20ff 0x2400-0x247f 0x2800-0x28ff 0x2c00-0x2cff
[ 18.325985] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0x90000000-0x903fffff]
[ 18.325993] pcmcia_socket pcmcia_socket0: cs: memory probe 0x90000000-0x903fffff: excluding 0x90000000-0x9003ffff 0x90100000-0x9013ffff 0x90200000-0x9023ffff 0x90300000-0x9033ffff
[ 18.326013] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0x30000000-0x33ffffff pref]
[ 18.326018] pcmcia_socket pcmcia_socket0: cs: memory probe 0x30000000-0x33ffffff: excluding 0x30000000-0x33ffffff
[ 18.330904] usbcore: registered new interface driver usbserial
[ 18.330930] USB Serial support registered for generic
[ 18.424078] usb 4-2: new full speed USB device using uhci_hcd and address 2
[ 18.478529] cfg80211: Calling CRDA to update world regulatory domain
[ 18.585362] libipw: 802.11 data/management/control stack, git-1.1.13
[ 18.585367] libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 18.586969] usbcore: registered new interface driver hiddev
[ 18.600832] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input7
[ 18.601114] generic-usb 0003:046D:C018.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1/input0
[ 18.601175] audit: name_count maxed, losing inode data: dev=00:07, inode=4435
[ 18.601795] audit: name_count maxed, losing inode data: dev=00:07, inode=4373
[ 18.601800] audit: name_count maxed, losing inode data: dev=00:07, inode=4436
[ 18.601805] audit: name_count maxed, losing inode data: dev=00:07, inode=4436
[ 18.602648] usbcore: registered new interface driver usbhid
[ 18.602652] usbhid: USB HID core driver
[ 18.639807] usb 4-2: New USB device found, idVendor=049f, idProduct=0086
[ 18.639813] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 18.639817] usb 4-2: Product: Bluetooth by hp
[ 18.639820] usb 4-2: Manufacturer: ACTIONTEC
[ 18.643946] usbcore: registered new interface driver usbserial_generic
[ 18.643952] usbserial: USB Serial Driver core
[ 18.688035] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 18.688039] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 18.688190] ipw2200 0000:02:02.0: PCI INT A -> Link[C0C5] -> GSI 5 (level, low) -> IRQ 5
[ 18.689184] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 18.838587] Bluetooth: Core ver 2.15
[ 18.838623] NET: Registered protocol family 31
[ 18.838625] Bluetooth: HCI device and connection manager initialized
[ 18.838630] Bluetooth: HCI socket layer initialized
[ 18.910302] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
[ 18.930090] udev: renamed network interface eth1 to wlan0
[ 18.933375] input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input8
[ 18.934216] microsoft 0003:045E:00DB.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1d.0-2/input0
[ 18.958019] input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input9
[ 18.958272] microsoft 0003:045E:00DB.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1d.0-2/input1
[ 19.397251] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 19.397938] usbcore: registered new interface driver btusb
[ 19.422484] Adding 1020092k swap on /dev/sda5. Priority:-1 extents:1 across:1020092k
[ 19.440936] EXT4-fs (sda6): re-mounted. Opts: (null)
[ 19.468680] USB Serial support registered for GSM modem (1-port)
[ 19.469842] usbcore: registered new interface driver option
[ 19.469845] option: v0.7.2:USB Driver for GSM modems
[ 20.064424] Intel ICH 0000:00:1f.5: PCI INT B -> Link[C0C3] -> GSI 10 (level, low) -> IRQ 10
[ 20.064507] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 20.197545] EXT4-fs (sda6): re-mounted. Opts: acl,user_xattr,errors=remount-ro
[ 20.359158] device-mapper: uevent: version 1.0.3
[ 20.360433] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
[ 20.384294] PPP generic driver version 2.4.2
[ 20.992050] intel8x0_measure_ac97_clock: measured 55345 usecs (2666 samples)
[ 20.992054] intel8x0: clocking to 48000
[ 20.992432] audit: name_count maxed, losing inode data: dev=00:05, inode=5429
[ 20.992469] audit: name_count maxed, losing inode data: dev=00:05, inode=4
[ 20.992475] audit: name_count maxed, losing inode data: dev=00:05, inode=4
[ 20.992507] audit: name_count maxed, losing inode data: dev=00:05, inode=4
[ 20.992513] audit: name_count maxed, losing inode data: dev=00:05, inode=4
[ 20.992580] audit: name_count maxed, losing inode data: dev=00:05, inode=3931
[ 20.992585] audit: name_count maxed, losing inode data: dev=00:05, inode=3931
[ 20.992629] audit: name_count maxed, losing inode data: dev=00:05, inode=4
[ 20.992634] audit: name_count maxed, losing inode data: dev=00:05, inode=4
[ 20.993490] Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[C0C3] -> GSI 10 (level, low) -> IRQ 10
[ 20.993516] Intel ICH Modem 0000:00:1f.6: setting latency timer to 64
[ 21.200126] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[ 21.277878] fuse init (API version 7.15)
[ 23.123863] eth0: link down
[ 23.124245] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 23.205327] lp0: using parport0 (interrupt-driven).
[ 23.236956] Bluetooth: L2CAP ver 2.15
[ 23.236960] Bluetooth: L2CAP socket layer initialized
[ 23.414330] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 23.414335] Bluetooth: BNEP filters: protocol multicast
[ 23.440748] ppdev: user-space parallel port driver
[ 23.473457] Bluetooth: RFCOMM TTY layer initialized
[ 23.473465] Bluetooth: RFCOMM socket layer initialized
[ 23.473468] Bluetooth: RFCOMM ver 1.11
[ 23.479851] Bluetooth: SCO (Voice Link) ver 0.6
[ 23.479855] Bluetooth: SCO socket layer initialized
[ 23.731576] lib80211_crypt: registered algorithm 'CCMP'
[ 23.784424] padlock: VIA PadLock not detected.
[ 24.019646] lib80211_crypt: registered algorithm 'TKIP'
[ 24.331097] ttyS2: LSR safety check engaged!
[ 24.341859] ttyS0: LSR safety check engaged!
[ 32.620071] type=1305 audit(1285785984.009:22682): auid=4294967295 ses=4294967295 op="remove rule" key=(null) list=4 res=1
[ 32.620086] type=1305 audit(1285785984.009:22683): audit_enabled=0 old=1 auid=4294967295 ses=4294967295 res=1
[ 33.440026] wlan0: no IPv6 routers present
Reply to: