Bug#597226: EXT4-fs error in (almost) every boot
Package: linux-image-2.6.32-5-686
Version: 2.6.32-22
Severity: normal
At almost every boot, the system crashes and after wait some minutes,
It is possible log as root and execute some commands. The output of
dmesg is attached (dmesg.txt). I think the most important part is:
[ 6.130438] Adding 1952760k swap on /dev/sda7. Priority:-1
extents:1 across:1952760k
[ 6.357951] loop: module loaded
[ 6.488050] EXT4-fs error (device sda5): ext4_mb_generate_buddy:
EXT4-fs: group 65: 7 blocks in bitmap, 8 in gd
[ 6.488165] Aborting journal on device sda5-8.
[ 6.488478] EXT4-fs (sda5): Remounting filesystem read-only
[ 6.489658] EXT4-fs (sda5): delayed block allocation failed for
inode 527890 at logical offset 0 with max blocks 1 with error -30
[ 6.489774] This should not happen!! Data will be lost
[ 6.489818] EXT4-fs (sda5): ext4_da_writepages: jbd2_start:
2147483647 pages, ino 527890; err -30
[ 6.516730] EXT4-fs (sda6): mounted filesystem with ordered data mode
[ 6.616070] fuse init (API version 7.13)
So, I have to restart using a live-cd (I use Gparted-live 0.6.2) and
restore the system using fsck. The output of fsck is atacked
(gparted_details.htm). After that, the sytem boot normally, but if I
shut down and turn on again, the system can crash again.
I run the full test SMART using the gnome-disk-utility and no error
were reported.
Before I use ext4 filesystem, I used reiser-fs and I had no problems
at boot time.
Sorry for my english.
------------------------------------------------------------------------------------
Reportbug output:
-- Package-specific info:
** Version:
Linux version 2.6.32-5-686 (Debian 2.6.32-22) (maks@debian.org) (gcc
version 4.3.5 (Debian 4.3.5-3) ) #1 SMP Wed Sep 15 08:01:33 UTC 2010
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686
root=UUID=2da7c77b-dd9b-455e-a64c-1dc402a6118d ro quiet
** Tainted: P (1)
* Proprietary module has been loaded.
** Kernel log:
[ 1.096825] ata1.00: 488395055 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.112453] ata2.00: configured for UDMA/100
[ 1.112516] ata1.00: configured for UDMA/133
[ 1.112599] scsi 0:0:0:0: Direct-Access ATA SAMSUNG
HD250HJ FH10 PQ: 0 ANSI: 5
[ 1.113408] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW
SH-S223F SB03 PQ: 0 ANSI: 5
[ 1.120724] sd 0:0:0:0: [sda] 488395055 512-byte logical blocks:
(250 GB/232 GiB)
[ 1.120764] sd 0:0:0:0: [sda] Write Protect is off
[ 1.120767] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.120784] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.120983] sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[ 1.169984] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.176041] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw
xa/form2 cdda tray
[ 1.176046] Uniform CD-ROM driver Revision: 3.20
[ 1.176181] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.180324] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.180638] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.635549] PM: Starting manual resume from disk
[ 1.635552] PM: Resume from partition 8:7
[ 1.635553] PM: Checking hibernation image.
[ 1.635713] PM: Error -22 checking image file
[ 1.635717] PM: Resume from disk failed.
[ 1.680971] EXT4-fs (sda5): mounted filesystem with ordered data mode
[ 2.794665] udev: starting version 160
[ 2.987773] processor LNXCPU:00: registered as cooling_device0
[ 2.987947] ACPI: SSDT 7fee78c0 00087 (v01 PmRef Cpu1Ist 00003000
INTL 20040311)
[ 2.988940] processor LNXCPU:01: registered as cooling_device1
[ 3.192558] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 3.192565] ACPI: Power Button [PWRB]
[ 3.192625] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 3.192628] ACPI: Power Button [PWRF]
[ 3.371247] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 3.505243] parport_pc 00:08: reported by Plug and Play ACPI
[ 3.505288] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 4.125195] nvidia: module license 'NVIDIA' taints kernel.
[ 4.125199] Disabling lock debugging due to kernel taint
[ 4.174849] input: ImPS/2 Generic Wheel Mouse as
/devices/platform/i8042/serio1/input/input4
[ 4.807382] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level,
low) -> IRQ 19
[ 5.053840] intel_rng: FWH not detected
[ 5.054070] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.054076] nvidia 0000:01:00.0: setting latency timer to 64
[ 5.054081] vgaarb: device changed decodes:
PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 5.054257] NVRM: loading NVIDIA UNIX x86 Kernel Module 256.44
Thu Jul 29 01:30:36 PDT 2010
[ 5.443227] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level,
low) -> IRQ 16
[ 5.443248] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 5.515726] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input5
[ 6.065802] Adding 1952760k swap on /dev/sda7. Priority:-1
extents:1 across:1952760k
[ 6.293525] loop: module loaded
[ 6.452122] EXT4-fs (sda6): mounted filesystem with ordered data mode
[ 6.543173] fuse init (API version 7.13)
[ 10.879832] r8169: eth0: link up
[ 10.879837] r8169: eth0: link up
[ 12.206446] Bluetooth: Core ver 2.15
[ 12.206493] NET: Registered protocol family 31
[ 12.206495] Bluetooth: HCI device and connection manager initialized
[ 12.206498] Bluetooth: HCI socket layer initialized
[ 12.325247] Bluetooth: L2CAP ver 2.14
[ 12.325251] Bluetooth: L2CAP socket layer initialized
[ 12.406529] Bluetooth: RFCOMM TTY layer initialized
[ 12.406536] Bluetooth: RFCOMM socket layer initialized
[ 12.406539] Bluetooth: RFCOMM ver 1.11
[ 12.452167] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 12.452171] Bluetooth: BNEP filters: protocol multicast
[ 12.583588] Bridge firewalling registered
[ 12.777962] Bluetooth: SCO (Voice Link) ver 0.6
[ 12.777966] Bluetooth: SCO socket layer initialized
[ 14.086335] lp0: using parport0 (interrupt-driven).
[ 14.113360] ppdev: user-space parallel port driver
[ 17.944703] CPU0 attaching NULL sched-domain.
[ 17.944711] CPU1 attaching NULL sched-domain.
[ 17.968074] CPU0 attaching sched-domain:
[ 17.968079] domain 0: span 0-1 level MC
[ 17.968084] groups: 0 1
[ 17.968092] CPU1 attaching sched-domain:
[ 17.968095] domain 0: span 0-1 level MC
[ 17.968099] groups: 1 0
[ 21.460020] eth0: no IPv6 routers present
[ 414.356042] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 414.498339] usb 1-1: New USB device found, idVendor=0951, idProduct=1607
[ 414.498344] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 414.498348] usb 1-1: Product: DataTraveler 2.0
[ 414.498352] usb 1-1: Manufacturer: Kingston
[ 414.498355] usb 1-1: SerialNumber: 5B88040002A3
[ 414.498481] usb 1-1: configuration #1 chosen from 1 choice
[ 414.543189] Initializing USB Mass Storage driver...
[ 414.543317] scsi2 : SCSI emulation for USB Mass Storage devices
[ 414.543514] usbcore: registered new interface driver usb-storage
[ 414.543519] USB Mass Storage support registered.
[ 414.545673] usb-storage: device found at 2
[ 414.545677] usb-storage: waiting for device to settle before scanning
[ 419.544836] usb-storage: device scan complete
[ 419.545827] scsi 2:0:0:0: Direct-Access Kingston DataTraveler
2.0 PMAP PQ: 0 ANSI: 0 CCS
[ 419.546446] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 422.836615] sd 2:0:0:0: [sdb] 15646720 512-byte logical blocks:
(8.01 GB/7.46 GiB)
[ 422.837105] sd 2:0:0:0: [sdb] Write Protect is off
[ 422.837110] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 422.837114] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 422.839607] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 422.839613] sdb: sdb1
[ 422.842859] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 422.842866] sd 2:0:0:0: [sdb] Attached SCSI removable disk
** Model information
not available
** Loaded modules:
Module Size Used by
usb_storage 30541 1
ppdev 4058 0
lp 5570 0
sco 5857 2
bridge 32987 0
stp 996 1 bridge
bnep 7444 2
rfcomm 25171 0
l2cap 21705 6 bnep,rfcomm
bluetooth 36319 6 sco,bnep,rfcomm,l2cap
acpi_cpufreq 4943 0
rfkill 10264 3 bluetooth
cpufreq_userspace 1480 0
cpufreq_stats 1940 0
cpufreq_powersave 602 0
cpufreq_conservative 4018 0
binfmt_misc 4907 1
fuse 43762 5
loop 9765 0
snd_hda_codec_realtek 163238 1
snd_hda_intel 16787 4
snd_hda_codec 46002 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 4054 1 snd_hda_codec
snd_pcm_oss 28671 0
snd_mixer_oss 10461 1 snd_pcm_oss
snd_pcm 47226 4 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_midi 3576 0
snd_rawmidi 12513 1 snd_seq_midi
snd_seq_midi_event 3684 1 snd_seq_midi
snd_seq 35463 2 snd_seq_midi,snd_seq_midi_event
snd_timer 12258 3 snd_pcm,snd_seq
i2c_i801 6462 0
snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq
nvidia 10044404 22
snd 34363 17
snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 3450 1 snd
parport_pc 15799 1
parport 22554 3 ppdev,lp,parport_pc
snd_page_alloc 5045 2 snd_hda_intel,snd_pcm
psmouse 44657 0
rng_core 2178 0
pcspkr 1207 0
i2c_core 12696 2 i2c_i801,nvidia
evdev 5609 10
serio_raw 2916 0
button 3598 0
processor 26671 1 acpi_cpufreq
ext4 257739 2
mbcache 3762 1 ext4
jbd2 56155 1 ext4
crc16 1027 2 l2cap,ext4
sg 15968 0
sr_mod 10770 0
cdrom 26487 1 sr_mod
sd_mod 25869 7
crc_t10dif 1012 1 sd_mod
ata_generic 2019 0
uhci_hcd 16057 0
ata_piix 17736 4
thermal 9206 0
thermal_sys 9378 2 processor,thermal
libata 115721 2 ata_generic,ata_piix
r8169 24836 0
mii 2714 1 r8169
ehci_hcd 27851 0
scsi_mod 101401 5 usb_storage,sg,sr_mod,sd_mod,libata
usbcore 98397 4 usb_storage,uhci_hcd,ehci_hcd
nls_base 4541 1 usbcore
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31
Express DRAM Controller [8086:29c0] (rev 02)
Subsystem: Giga-byte Technology Device [1458:5000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express
PCI Express Root Port [8086:29c1] (rev 02) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: d0000000-d3ffffff
Prefetchable memory behind bridge: 00000000a0000000-00000000bfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High
Definition Audio Controller [8086:27d8] (rev 01)
Subsystem: Giga-byte Technology Device [1458:a002]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d5100000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI
Express Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: 80000000-801fffff
Prefetchable memory behind bridge: 0000000080200000-00000000803fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI
Express Port 2 [8086:27d2] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: d4000000-d4ffffff
Prefetchable memory behind bridge: 00000000d5000000-00000000d50fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB
UHCI Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at e000 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB
UHCI Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at e100 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB
UHCI Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at e200 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB
UHCI Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at e300 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2
EHCI Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Device [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at d5104000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge
[8086:244e] (rev e1) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
I/O behind bridge: 0000a000-0000afff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family)
LPC Interface Bridge [8086:27b8] (rev 01)
Subsystem: Giga-byte Technology Device [1458:5001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation N10/ICH7 Family SATA
IDE Controller [8086:27c0] (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Giga-byte Technology Device [1458:b002]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at f000 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus
Controller [8086:27da] (rev 01)
Subsystem: Giga-byte Technology GA-8I945PG-RH Mainboard [1458:5001]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 0500 [size=32]
Kernel driver in use: i801_smbus
01:00.0 VGA compatible controller [0300]: nVidia Corporation G84
[GeForce 8600 GT] [10de:0402] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Elitegroup Computer Systems Device [1019:1712]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d2000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at a0000000 (64-bit, prefetchable) [size=512M]
Region 3: Memory at d0000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at c000 [size=128]
[virtual] Expansion ROM at d3000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev
02)
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 27
Region 0: I/O ports at d000 [size=256]
Region 2: Memory at d5010000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at d5000000 (64-bit, prefetchable) [size=64K]
[virtual] Expansion ROM at d5020000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: r8169
** USB devices:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0951:1607 Kingston Technology DataTraveler 100
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-686 (SMP w/2 CPU cores)
Locale: LANG=pt_BR.utf8, LC_CTYPE=pt_BR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-686 depends on:
ii debconf [debconf-2.0] 1.5.35 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.2 tools for generating an initramfs
ii linux-base 2.6.32-22 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-686 recommends:
pn firmware-linux-free <none> (no description available)
ii libc6-i686 2.11.2-5 Embedded GNU C Library: Shared lib
Versions of packages linux-image-2.6.32-5-686 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-5-686/prerm/removing-running-kernel-2.6.32-5-686: true
linux-image-2.6.32-5-686/prerm/would-invalidate-boot-loader-2.6.32-5-686: true
linux-image-2.6.32-5-686/postinst/bootloader-test-error-2.6.32-5-686:
linux-image-2.6.32-5-686/postinst/bootloader-error-2.6.32-5-686:
linux-image-2.6.32-5-686/postinst/depmod-error-initrd-2.6.32-5-686: false
linux-image-2.6.32-5-686/postinst/ignoring-do-bootloader-2.6.32-5-686:
linux-image-2.6.32-5-686/postinst/missing-firmware-2.6.32-5-686:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-22) (maks@debian.org) (gcc version 4.3.5 (Debian 4.3.5-3) ) #1 SMP Wed Sep 15 08:01:33 UTC 2010
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
[ 0.000000] BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000c0000000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x7fee0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CCFFF write-protect
[ 0.000000] CD000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07FF00000 mask FFFF00000 write-through
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037000000 page 2M
[ 0.000000] 0037000000 - 00373fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 7000-d000
[ 0.000000] RAMDISK: 377e2000 - 37fef12d
[ 0.000000] Allocated new RAMDISK: 00100000 - 0090d12d
[ 0.000000] Move RAMDISK from 00000000377e2000 - 0000000037fef12c to 00100000 - 0090d12c
[ 0.000000] ACPI: RSDP 000f6910 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 7fee3040 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 7fee30c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 7fee3180 040DF (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 7fee0000 00040
[ 0.000000] ACPI: HPET 7fee73c0 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 7fee7440 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: APIC 7fee72c0 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: SSDT 7fee74c0 001E0 (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
[ 0.000000] ACPI: SSDT 7fee7950 00275 (v01 PmRef CpuPm 00003000 INTL 20040311)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1162MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 0 - 373fe000
[ 0.000000] node 0 low ram: 00000000 - 373fe000
[ 0.000000] node 0 bootmap 00009000 - 0000fe80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014c7bb4] TEXT DATA BSS ==> [0001000000 - 00014c7bb4]
[ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #5 [00014c8000 - 00014ce0f6] BRK ==> [00014c8000 - 00014ce0f6]
[ 0.000000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
[ 0.000000] #7 [0000100000 - 000090d12d] NEW RAMDISK ==> [0000100000 - 000090d12d]
[ 0.000000] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000]
[ 0.000000] found SMP MP-table at [c00f4f50] f4f50
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0007fee0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007fee0
[ 0.000000] On node 0 totalpages: 523903
[ 0.000000] free_area_init_node: node 0, pgdat c13b2700, node_mem_map c14d0000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3967 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2326 pages used for memmap
[ 0.000000] HighMem zone: 295372 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 7ff00000 (gap: 7ff00000:40100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2800000 s34328 r0 d23016 u1048576
[ 0.000000] pcpu-alloc: s34328 r0 d23016 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519809
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=2da7c77b-dd9b-455e-a64c-1dc402a6118d ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000373fe:0007fee0)
[ 0.000000] Memory: 2063912k/2096000k available (2498k kernel code, 30652k reserved, 1326k data, 372k init, 1190792k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.000000] .init : 0xc13bd000 - 0xc141a000 ( 372 kB)
[ 0.000000] .data : 0xc12708d9 - 0xc13bc260 (1326 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12708d9 (2498 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2400.117 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.23 BogoMIPS (lpj=9600468)
[ 0.004016] Security Framework initialized
[ 0.004021] SELinux: Disabled at boot.
[ 0.004026] Mount-cache hash table entries: 512
[ 0.004126] Initializing cgroup subsys ns
[ 0.004130] Initializing cgroup subsys cpuacct
[ 0.004133] Initializing cgroup subsys devices
[ 0.004135] Initializing cgroup subsys freezer
[ 0.004137] Initializing cgroup subsys net_cls
[ 0.004154] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004156] CPU: L2 cache: 2048K
[ 0.004158] CPU: Physical Processor ID: 0
[ 0.004159] CPU: Processor Core ID: 0
[ 0.004162] mce: CPU supports 6 MCE banks
[ 0.004169] CPU0: Thermal monitoring enabled (TM2)
[ 0.004171] using mwait in idle threads.
[ 0.004177] Performance Events: Core2 events, Intel PMU driver.
[ 0.004182] ... version: 2
[ 0.004184] ... bit width: 40
[ 0.004185] ... generic registers: 2
[ 0.004187] ... value mask: 000000ffffffffff
[ 0.004188] ... max period: 000000007fffffff
[ 0.004190] ... fixed-purpose events: 3
[ 0.004191] ... event mask: 0000000700000003
[ 0.004194] Checking 'hlt' instruction... OK.
[ 0.021015] ACPI: Core revision 20090903
[ 0.028065] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.028400] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.071055] CPU0: Intel(R) Core(TM)2 Duo CPU E4600 @ 2.40GHz stepping 0d
[ 0.072001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 2048K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] CPU1: Thermal monitoring enabled (TM2)
[ 0.156069] CPU1: Intel(R) Core(TM)2 Duo CPU E4600 @ 2.40GHz stepping 0d
[ 0.156079] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.160042] Brought up 2 CPUs
[ 0.160044] Total of 2 processors activated (9600.18 BogoMIPS).
[ 0.160404] CPU0 attaching sched-domain:
[ 0.160407] domain 0: span 0-1 level MC
[ 0.160409] groups: 0 1
[ 0.160414] CPU1 attaching sched-domain:
[ 0.160415] domain 0: span 0-1 level MC
[ 0.160417] groups: 1 0
[ 0.160490] devtmpfs: initialized
[ 0.160490] regulator: core version 0.5
[ 0.160490] NET: Registered protocol family 16
[ 0.160490] ACPI: bus type pci registered
[ 0.160490] PCI: MCFG configuration 0: base c0000000 segment 0 buses 0 - 255
[ 0.160490] PCI: MCFG area at c0000000 reserved in E820
[ 0.160490] PCI: Using MMCONFIG for extended config space
[ 0.160490] PCI: Using configuration type 1 for base access
[ 0.160490] bio: create slab <bio-0> at 0
[ 0.160490] ACPI: EC: Look up EC in DSDT
[ 0.165786] ACPI: Interpreter enabled
[ 0.165793] ACPI: (supports S0 S3 S4 S5)
[ 0.165811] ACPI: Using IOAPIC for interrupt routing
[ 0.169462] ACPI: No dock devices found.
[ 0.169538] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.169633] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.169636] pci 0000:00:01.0: PME# disabled
[ 0.169693] pci 0000:00:1b.0: reg 10 64bit mmio: [0xd5100000-0xd5103fff]
[ 0.169731] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.169735] pci 0000:00:1b.0: PME# disabled
[ 0.169792] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.169796] pci 0000:00:1c.0: PME# disabled
[ 0.169855] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.169858] pci 0000:00:1c.1: PME# disabled
[ 0.169904] pci 0000:00:1d.0: reg 20 io port: [0xe000-0xe01f]
[ 0.169948] pci 0000:00:1d.1: reg 20 io port: [0xe100-0xe11f]
[ 0.169993] pci 0000:00:1d.2: reg 20 io port: [0xe200-0xe21f]
[ 0.170037] pci 0000:00:1d.3: reg 20 io port: [0xe300-0xe31f]
[ 0.170080] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd5104000-0xd51043ff]
[ 0.170232] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 0.170236] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.170239] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[ 0.170242] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[ 0.170287] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
[ 0.170293] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
[ 0.170298] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
[ 0.170303] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
[ 0.170309] pci 0000:00:1f.2: reg 20 io port: [0xf000-0xf00f]
[ 0.170330] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.170334] pci 0000:00:1f.2: PME# disabled
[ 0.170376] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f]
[ 0.170426] pci 0000:01:00.0: reg 10 32bit mmio: [0xd2000000-0xd2ffffff]
[ 0.170435] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xa0000000-0xbfffffff]
[ 0.170443] pci 0000:01:00.0: reg 1c 64bit mmio: [0xd0000000-0xd1ffffff]
[ 0.170449] pci 0000:01:00.0: reg 24 io port: [0xc000-0xc07f]
[ 0.170454] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.170564] pci 0000:00:01.0: bridge io port: [0xc000-0xcfff]
[ 0.170567] pci 0000:00:01.0: bridge 32bit mmio: [0xd0000000-0xd3ffffff]
[ 0.170571] pci 0000:00:01.0: bridge 64bit mmio pref: [0xa0000000-0xbfffffff]
[ 0.170607] pci 0000:00:1c.0: bridge io port: [0xb000-0xbfff]
[ 0.170656] pci 0000:03:00.0: reg 10 io port: [0xd000-0xd0ff]
[ 0.170675] pci 0000:03:00.0: reg 18 64bit mmio pref: [0xd5010000-0xd5010fff]
[ 0.170689] pci 0000:03:00.0: reg 20 64bit mmio pref: [0xd5000000-0xd500ffff]
[ 0.170697] pci 0000:03:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[ 0.170737] pci 0000:03:00.0: supports D1 D2
[ 0.170739] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.170744] pci 0000:03:00.0: PME# disabled
[ 0.176101] pci 0000:00:1c.1: bridge io port: [0xd000-0xdfff]
[ 0.176107] pci 0000:00:1c.1: bridge 32bit mmio: [0xd4000000-0xd4ffffff]
[ 0.176116] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xd5000000-0xd50fffff]
[ 0.176173] pci 0000:00:1e.0: transparent bridge
[ 0.176177] pci 0000:00:1e.0: bridge io port: [0xa000-0xafff]
[ 0.176197] pci_bus 0000:00: on NUMA node 0
[ 0.176201] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.176345] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.176394] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 0.176451] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.185101] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.185179] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.185256] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.185333] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.185410] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.185487] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.185564] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.185641] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 0.185725] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.185728] vgaarb: loaded
[ 0.185760] PCI: Using ACPI for IRQ routing
[ 0.185760] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.185760] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.188021] Switching to clocksource tsc
[ 0.189123] pnp: PnP ACPI init
[ 0.189130] ACPI: bus type pnp registered
[ 0.191216] pnp: PnP ACPI: found 15 devices
[ 0.191218] ACPI: ACPI bus type pnp unregistered
[ 0.191222] PnPBIOS: Disabled by ACPI PNP
[ 0.191229] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.191232] system 00:01: ioport range 0x290-0x29f has been reserved
[ 0.191234] system 00:01: ioport range 0x800-0x87f has been reserved
[ 0.191237] system 00:01: ioport range 0x290-0x294 has been reserved
[ 0.191239] system 00:01: ioport range 0x880-0x88f has been reserved
[ 0.191246] system 00:0b: ioport range 0x400-0x4bf could not be reserved
[ 0.191251] system 00:0c: iomem range 0xc0000000-0xcfffffff has been reserved
[ 0.191256] system 00:0d: iomem range 0xcd000-0xcffff has been reserved
[ 0.191258] system 00:0d: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.191261] system 00:0d: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.191264] system 00:0d: iomem range 0xfc000-0xfffff could not be reserved
[ 0.191266] system 00:0d: iomem range 0x7fee0000-0x7fefffff could not be reserved
[ 0.191269] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 0.191271] system 00:0d: iomem range 0x100000-0x7fedffff could not be reserved
[ 0.191274] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.191277] system 00:0d: iomem range 0xfed13000-0xfed1dfff has been reserved
[ 0.191279] system 00:0d: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.191282] system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.191284] system 00:0d: iomem range 0xffb00000-0xffb7ffff has been reserved
[ 0.191287] system 00:0d: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.191289] system 00:0d: iomem range 0xe0000-0xeffff has been reserved
[ 0.225959] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.225962] pci 0000:00:01.0: IO window: 0xc000-0xcfff
[ 0.225966] pci 0000:00:01.0: MEM window: 0xd0000000-0xd3ffffff
[ 0.225969] pci 0000:00:01.0: PREFETCH window: 0x000000a0000000-0x000000bfffffff
[ 0.225973] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.225976] pci 0000:00:1c.0: IO window: 0xb000-0xbfff
[ 0.225980] pci 0000:00:1c.0: MEM window: 0x80000000-0x801fffff
[ 0.225984] pci 0000:00:1c.0: PREFETCH window: 0x00000080200000-0x000000803fffff
[ 0.225990] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.225993] pci 0000:00:1c.1: IO window: 0xd000-0xdfff
[ 0.225998] pci 0000:00:1c.1: MEM window: 0xd4000000-0xd4ffffff
[ 0.226002] pci 0000:00:1c.1: PREFETCH window: 0x000000d5000000-0x000000d50fffff
[ 0.226007] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 0.226010] pci 0000:00:1e.0: IO window: 0xa000-0xafff
[ 0.226014] pci 0000:00:1e.0: MEM window: disabled
[ 0.226017] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.226029] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.226032] pci 0000:00:01.0: setting latency timer to 64
[ 0.226039] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.226043] pci 0000:00:1c.0: setting latency timer to 64
[ 0.226050] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.226054] pci 0000:00:1c.1: setting latency timer to 64
[ 0.226060] pci 0000:00:1e.0: setting latency timer to 64
[ 0.226063] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.226066] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.226068] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
[ 0.226070] pci_bus 0000:01: resource 1 mem: [0xd0000000-0xd3ffffff]
[ 0.226073] pci_bus 0000:01: resource 2 pref mem [0xa0000000-0xbfffffff]
[ 0.226075] pci_bus 0000:02: resource 0 io: [0xb000-0xbfff]
[ 0.226077] pci_bus 0000:02: resource 1 mem: [0x80000000-0x801fffff]
[ 0.226079] pci_bus 0000:02: resource 2 pref mem [0x80200000-0x803fffff]
[ 0.226081] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff]
[ 0.226084] pci_bus 0000:03: resource 1 mem: [0xd4000000-0xd4ffffff]
[ 0.226086] pci_bus 0000:03: resource 2 pref mem [0xd5000000-0xd50fffff]
[ 0.226088] pci_bus 0000:04: resource 0 io: [0xa000-0xafff]
[ 0.226090] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
[ 0.226092] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff]
[ 0.226115] NET: Registered protocol family 2
[ 0.226180] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.226408] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.226730] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.226913] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.226916] TCP reno registered
[ 0.226977] NET: Registered protocol family 1
[ 0.227073] pci 0000:01:00.0: Boot video device
[ 0.227113] Unpacking initramfs...
[ 0.420995] Freeing initrd memory: 8244k freed
[ 0.424974] audit: initializing netlink socket (disabled)
[ 0.424986] type=2000 audit(1284736969.423:1): initialized
[ 0.427878] highmem bounce pool size: 64 pages
[ 0.427883] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.429042] VFS: Disk quotas dquot_6.5.2
[ 0.429086] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.429149] msgmni has been set to 1723
[ 0.429307] alg: No test for stdrng (krng)
[ 0.429345] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.429348] io scheduler noop registered
[ 0.429350] io scheduler anticipatory registered
[ 0.429351] io scheduler deadline registered
[ 0.429380] io scheduler cfq registered (default)
[ 0.429478] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.429484] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.429571] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.429578] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.429679] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
[ 0.429686] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.429826] isapnp: Scanning for PnP cards...
[ 0.782753] isapnp: No Plug & Play device found
[ 0.783840] Linux agpgart interface v0.103
[ 0.783944] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.784030] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.784293] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.784452] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.784813] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.784818] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.784865] mice: PS/2 mouse device common for all mice
[ 0.784908] rtc_cmos 00:04: RTC can wake from S4
[ 0.784932] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.784954] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.784964] cpuidle: using governor ladder
[ 0.784966] cpuidle: using governor menu
[ 0.784969] No iBFT detected.
[ 0.785236] TCP cubic registered
[ 0.785349] NET: Registered protocol family 10
[ 0.785714] lo: Disabled Privacy Extensions
[ 0.785966] Mobile IPv6
[ 0.785968] NET: Registered protocol family 17
[ 0.785980] Using IPI No-Shortcut mode
[ 0.786033] PM: Resume from disk failed.
[ 0.786041] registered taskstats version 1
[ 0.786293] rtc_cmos 00:04: setting system clock to 2010-09-17 15:22:50 UTC (1284736970)
[ 0.786318] Initalizing network drop monitor service
[ 0.786338] Freeing unused kernel memory: 372k freed
[ 0.786501] Write protecting the kernel text: 2500k
[ 0.786519] Write protecting the kernel read-only data: 920k
[ 0.798812] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.799180] udev: starting version 160
[ 0.894216] usbcore: registered new interface driver usbfs
[ 0.894329] usbcore: registered new interface driver hub
[ 0.894443] usbcore: registered new device driver usb
[ 0.897815] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.897846] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.897879] r8169 0000:03:00.0: setting latency timer to 64
[ 0.897928] r8169 0000:03:00.0: irq 27 for MSI/MSI-X
[ 0.898458] eth0: RTL8168c/8111c at 0xf7d06000, 00:1a:4d:78:c2:d5, XID 1c2000c0 IRQ 27
[ 0.899572] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.899594] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.899603] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.899606] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.899624] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.899637] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.902618] SCSI subsystem initialized
[ 0.903524] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.903598] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd5104000
[ 0.915748] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.915765] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.915768] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.915770] usb usb1: Product: EHCI Host Controller
[ 0.915772] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 0.915774] usb usb1: SerialNumber: 0000:00:1d.7
[ 0.915867] usb usb1: configuration #1 chosen from 1 choice
[ 0.915918] hub 1-0:1.0: USB hub found
[ 0.915925] hub 1-0:1.0: 8 ports detected
[ 0.916246] libata version 3.00 loaded.
[ 0.918350] ata_piix 0000:00:1f.2: version 2.13
[ 0.918372] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.918376] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.918409] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.918574] scsi0 : ata_piix
[ 0.918675] scsi1 : ata_piix
[ 0.919236] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 0.919239] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 0.921256] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.921287] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.921294] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.921298] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.921306] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.921330] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e000
[ 0.921361] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.921364] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.921365] usb usb2: Product: UHCI Host Controller
[ 0.921367] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 0.921369] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.921431] usb usb2: configuration #1 chosen from 1 choice
[ 0.921455] hub 2-0:1.0: USB hub found
[ 0.921461] hub 2-0:1.0: 2 ports detected
[ 0.921501] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.921506] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.921509] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.921515] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.921543] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e100
[ 0.921572] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.921574] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.921576] usb usb3: Product: UHCI Host Controller
[ 0.921578] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 0.921580] usb usb3: SerialNumber: 0000:00:1d.1
[ 0.921629] usb usb3: configuration #1 chosen from 1 choice
[ 0.921651] hub 3-0:1.0: USB hub found
[ 0.921656] hub 3-0:1.0: 2 ports detected
[ 0.921695] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.921700] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.921703] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.921709] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.921734] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e200
[ 0.921761] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.921764] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.921766] usb usb4: Product: UHCI Host Controller
[ 0.921767] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 0.921769] usb usb4: SerialNumber: 0000:00:1d.2
[ 0.921820] usb usb4: configuration #1 chosen from 1 choice
[ 0.921844] hub 4-0:1.0: USB hub found
[ 0.921849] hub 4-0:1.0: 2 ports detected
[ 0.921886] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.921891] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.921894] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.921900] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.921926] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e300
[ 0.921951] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.921953] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.921955] usb usb5: Product: UHCI Host Controller
[ 0.921957] usb usb5: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 0.921958] usb usb5: SerialNumber: 0000:00:1d.3
[ 0.922010] usb usb5: configuration #1 chosen from 1 choice
[ 0.922032] hub 5-0:1.0: USB hub found
[ 0.922036] hub 5-0:1.0: 2 ports detected
[ 1.072282] ata2.01: NODEV after polling detection
[ 1.080339] ata2.00: ATAPI: TSSTcorp CDDVDW SH-S223F, SB03, max UDMA/100
[ 1.080449] ata1.00: HPA detected: current 488395055, native 488397168
[ 1.080453] ata1.00: ATA-7: SAMSUNG HD250HJ, FH100-06, max UDMA7
[ 1.080456] ata1.00: 488395055 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.088347] ata1.00: configured for UDMA/133
[ 1.088485] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD250HJ FH10 PQ: 0 ANSI: 5
[ 1.096739] ata2.00: configured for UDMA/100
[ 1.097704] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223F SB03 PQ: 0 ANSI: 5
[ 1.106703] sd 0:0:0:0: [sda] 488395055 512-byte logical blocks: (250 GB/232 GiB)
[ 1.106799] sd 0:0:0:0: [sda] Write Protect is off
[ 1.106802] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.106820] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.106925] sda: sda1 sda2 sda3 <sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.112812] Uniform CD-ROM driver Revision: 3.20
[ 1.112946] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.132053] sda5 sda6 sda7 >
[ 1.152355] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.156516] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.156817] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.591112] PM: Starting manual resume from disk
[ 1.591115] PM: Resume from partition 8:7
[ 1.591117] PM: Checking hibernation image.
[ 1.591273] PM: Error -22 checking image file
[ 1.591276] PM: Resume from disk failed.
[ 1.609555] EXT4-fs (sda5): INFO: recovery required on readonly filesystem
[ 1.609559] EXT4-fs (sda5): write access will be enabled during recovery
[ 1.638397] EXT4-fs (sda5): recovery complete
[ 1.638536] EXT4-fs (sda5): mounted filesystem with ordered data mode
[ 2.768579] udev: starting version 160
[ 3.263216] processor LNXCPU:00: registered as cooling_device0
[ 3.263673] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 3.265534] ACPI: SSDT 7fee78c0 00087 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
[ 3.265744] processor LNXCPU:01: registered as cooling_device1
[ 3.268080] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 3.268085] ACPI: Power Button [PWRB]
[ 3.268223] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 3.268227] ACPI: Power Button [PWRF]
[ 3.374098] parport_pc 00:08: reported by Plug and Play ACPI
[ 3.374143] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 3.974236] nvidia: module license 'NVIDIA' taints kernel.
[ 3.974239] Disabling lock debugging due to kernel taint
[ 4.017955] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[ 4.903317] intel_rng: FWH not detected
[ 4.904157] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 4.906044] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.906050] nvidia 0000:01:00.0: setting latency timer to 64
[ 4.906054] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 4.906229] NVRM: loading NVIDIA UNIX x86 Kernel Module 256.44 Thu Jul 29 01:30:36 PDT 2010
[ 5.483001] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.483023] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 5.563856] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[ 6.130438] Adding 1952760k swap on /dev/sda7. Priority:-1 extents:1 across:1952760k
[ 6.357951] loop: module loaded
[ 6.488050] EXT4-fs error (device sda5): ext4_mb_generate_buddy: EXT4-fs: group 65: 7 blocks in bitmap, 8 in gd
[ 6.488165] Aborting journal on device sda5-8.
[ 6.488478] EXT4-fs (sda5): Remounting filesystem read-only
[ 6.489658] EXT4-fs (sda5): delayed block allocation failed for inode 527890 at logical offset 0 with max blocks 1 with error -30
[ 6.489774] This should not happen!! Data will be lost
[ 6.489818] EXT4-fs (sda5): ext4_da_writepages: jbd2_start: 2147483647 pages, ino 527890; err -30
[ 6.516730] EXT4-fs (sda6): mounted filesystem with ordered data mode
[ 6.616070] fuse init (API version 7.13)
[ 311.763024] Bluetooth: Core ver 2.15
[ 311.763080] NET: Registered protocol family 31
[ 311.763083] Bluetooth: HCI device and connection manager initialized
[ 311.763087] Bluetooth: HCI socket layer initialized
[ 311.772834] Bluetooth: L2CAP ver 2.14
[ 311.772838] Bluetooth: L2CAP socket layer initialized
[ 311.778989] Bluetooth: RFCOMM TTY layer initialized
[ 311.778994] Bluetooth: RFCOMM socket layer initialized
[ 311.778997] Bluetooth: RFCOMM ver 1.11
[ 311.970806] lp0: using parport0 (interrupt-driven).
[ 311.981018] ppdev: user-space parallel port driver
[ 601.524017] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 601.666295] usb 1-1: New USB device found, idVendor=0951, idProduct=1607
[ 601.666300] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 601.666304] usb 1-1: Product: DataTraveler 2.0
[ 601.666308] usb 1-1: Manufacturer: Kingston
[ 601.666311] usb 1-1: SerialNumber: 5B88040002A3
[ 601.666439] usb 1-1: configuration #1 chosen from 1 choice
[ 601.713476] Initializing USB Mass Storage driver...
[ 601.713599] scsi2 : SCSI emulation for USB Mass Storage devices
[ 601.713712] usbcore: registered new interface driver usb-storage
[ 601.713717] USB Mass Storage support registered.
[ 601.713825] usb-storage: device found at 2
[ 601.713828] usb-storage: waiting for device to settle before scanning
[ 606.712329] usb-storage: device scan complete
[ 606.713331] scsi 2:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
[ 606.713927] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 609.521677] sd 2:0:0:0: [sdb] 15646720 512-byte logical blocks: (8.01 GB/7.46 GiB)
[ 609.522169] sd 2:0:0:0: [sdb] Write Protect is off
[ 609.522174] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 609.522178] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 609.524292] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 609.524347] sdb: sdb1
[ 609.526296] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 609.526352] sd 2:0:0:0: [sdb] Attached SCSI removable disk
Title: Detalhes do Gparted
GParted 0.6.2
Libparted 2.3
|
Verificar e reparar o sistema de arquivos (ext4) em /dev/sda5 00:00:06 ( SUCESSO )
|
| |
|
calibrar /dev/sda5 00:00:00 ( SUCESSO )
|
| |
caminho: /dev/sda5
início: 323259993
fim: 354409964
tamanho: 31149972 (14.85 GB)
|
|
|
verificar erros no sistema de arquivos em /dev/sda5 e (se possível) corrigi-lo 00:00:06 ( SUCESSO )
|
| |
|
e2fsck -f -y -v /dev/sda5
|
| |
/dev/sda5: recovering journal
Superblock last mount time is in the future.
(by less than a day, probably due to the hardware clock being incorrectly set) Fix? yes
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
Free blocks count wrong for group #65 (8, counted=7).
Fix? yes
Free blocks count wrong (2181428, counted=2181427).
Fix? yes
/dev/sda5: ***** FILE SYSTEM WAS MODIFIED *****
257584 inodes used (26.42%)
293 non-contiguous files (0.1%)
343 non-contiguous directories (0.1%)
# of inodes with ind/dind/tind blocks: 0/0/0
Extent depth histogram: 226454/53
1712319 blocks used (43.98%)
0 bad blocks
1 large file
199776 regular files
21305 directories
12 character device files
25 block device files
2 fifos
528 links
36450 symbolic links (31023 fast symbolic links)
5 sockets
--------
258103 files
|
e2fsck 1.41.12 (17-May-2010)
|
|
|
|
aumentar o sistema de arquivos para preencher a partição 00:00:00 ( SUCESSO )
|
| |
|
resize2fs /dev/sda5
|
| |
resize2fs 1.41.12 (17-May-2010)
The filesystem is already 3893746 blocks long. Nothing to do!
|
|
|
|
========================================
|
Verificar e reparar o sistema de arquivos (ext4) em /dev/sda6 00:00:05 ( SUCESSO )
|
| |
|
calibrar /dev/sda6 00:00:01 ( SUCESSO )
|
| |
caminho: /dev/sda6
início: 354410496
fim: 484487167
tamanho: 130076672 (62.03 GB)
|
|
|
verificar erros no sistema de arquivos em /dev/sda6 e (se possível) corrigi-lo 00:00:04 ( SUCESSO )
|
| |
|
e2fsck -f -y -v /dev/sda6
|
| |
/dev/sda6: recovering journal
Superblock last mount time is in the future.
(by less than a day, probably due to the hardware clock being incorrectly set) Fix? yes
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
/dev/sda6: ***** FILE SYSTEM WAS MODIFIED *****
51887 inodes used (1.27%)
193 non-contiguous files (0.4%)
15 non-contiguous directories (0.0%)
# of inodes with ind/dind/tind blocks: 0/0/0
Extent depth histogram: 51751/63
6307894 blocks used (38.79%)
0 bad blocks
1 large file
46300 regular files
5515 directories
0 character device files
0 block device files
0 fifos
0 links
63 symbolic links (63 fast symbolic links)
0 sockets
--------
51878 files
|
e2fsck 1.41.12 (17-May-2010)
|
|
|
|
aumentar o sistema de arquivos para preencher a partição 00:00:00 ( SUCESSO )
|
| |
|
resize2fs /dev/sda6
|
| |
resize2fs 1.41.12 (17-May-2010)
The filesystem is already 16259584 blocks long. Nothing to do!
|
|
|
|
========================================
Reply to: