[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#596371: marked as done ((no subject))



Your message dated Fri, 10 Sep 2010 20:41:31 +0100
with message-id <20100910194130.GD11033@decadent.org.uk>
and subject line Re: Bug#596371: (no subject)
has caused the Debian Bug report #596371,
regarding (no subject)
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
596371: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=596371
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Subject: linux-image-2.6.32-5-amd64: usb 2.0 controller is managed as usb 1.1 by ohci-hcd
Package: linux-2.6
Version: 2.6.32-21
Severity: normal

According to the manual, my board has 5 external and 4 internal USB 2.0 connectors.
However as seen from lspci and lsusb, some of those are detected as USB 1.1.
The funny thing is, that the same physical port may be recognised as USB 2.0 and
after a reboot or reloding the ohci-hcd and ehci-hcd modules it is suddenly USB 1.1.
The order in which these modules are loaded is apparently unimportant. If I only
load ehci-hcd, only some ports will work (3 entrys in lsusb).

The bug may be related to bugzilla.kernel.org/show_bug.cgi?id=12707 but it is not
the same issue, since not the devices are incorrectly detected but the usb controller.

The bug persists with a 2.6.35 kernel from kernel.org compiled with the config of
the debian 2.6.32-5-amd64 kernel.

-- Package-specific info:
** Version:
Linux version 2.6.32-5-amd64 (Debian 2.6.32-21) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-2) ) #1 SMP Wed Aug 25 13:59:41 UTC 2010

** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=4e38c9e7-1d79-4f37-9c1a-8cc267e10fea ro quiet

** Tainted: P (1)
 * Proprietary module has been loaded.

** Kernel log:
[  308.364756] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[  308.364827] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[  308.364869] ehci_hcd 0000:00:12.2: EHCI Host Controller
[  308.364892] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[  308.364918] ehci_hcd 0000:00:12.2: debug port 1
[  308.364942] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe4ff800
[  308.380048] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[  308.380065] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[  308.380067] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  308.380068] usb usb1: Product: EHCI Host Controller
[  308.380070] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[  308.380071] usb usb1: SerialNumber: 0000:00:12.2
[  308.380136] usb usb1: configuration #1 chosen from 1 choice
[  308.380156] hub 1-0:1.0: USB hub found
[  308.380161] hub 1-0:1.0: 5 ports detected
[  308.380245] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[  308.380259] ehci_hcd 0000:00:13.2: EHCI Host Controller
[  308.380266] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[  308.380286] ehci_hcd 0000:00:13.2: debug port 1
[  308.380295] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe4ff400
[  308.392031] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[  308.392048] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[  308.392050] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  308.392051] usb usb2: Product: EHCI Host Controller
[  308.392053] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[  308.392054] usb usb2: SerialNumber: 0000:00:13.2
[  308.392112] usb usb2: configuration #1 chosen from 1 choice
[  308.392133] hub 2-0:1.0: USB hub found
[  308.392139] hub 2-0:1.0: 5 ports detected
[  308.392226] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[  308.392247] ehci_hcd 0000:00:16.2: EHCI Host Controller
[  308.392254] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
[  308.392275] ehci_hcd 0000:00:16.2: debug port 1
[  308.392286] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe4ff000
[  308.404031] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[  308.404047] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[  308.404049] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  308.404051] usb usb3: Product: EHCI Host Controller
[  308.404052] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[  308.404053] usb usb3: SerialNumber: 0000:00:16.2
[  308.404108] usb usb3: configuration #1 chosen from 1 choice
[  308.404126] hub 3-0:1.0: USB hub found
[  308.404132] hub 3-0:1.0: 4 ports detected
[  308.405346] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[  308.405384] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[  308.405411] ohci_hcd 0000:00:12.0: OHCI Host Controller
[  308.405421] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
[  308.405442] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe4fe000
[  308.464043] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[  308.464046] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  308.464047] usb usb4: Product: OHCI Host Controller
[  308.464049] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[  308.464050] usb usb4: SerialNumber: 0000:00:12.0
[  308.464117] usb usb4: configuration #1 chosen from 1 choice
[  308.464137] hub 4-0:1.0: USB hub found
[  308.464147] hub 4-0:1.0: 5 ports detected
[  308.464239] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[  308.464262] ohci_hcd 0000:00:13.0: OHCI Host Controller
[  308.464268] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[  308.464284] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe4fd000
[  308.524042] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[  308.524044] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  308.524046] usb usb5: Product: OHCI Host Controller
[  308.524047] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[  308.524048] usb usb5: SerialNumber: 0000:00:13.0
[  308.524113] usb usb5: configuration #1 chosen from 1 choice
[  308.524132] hub 5-0:1.0: USB hub found
[  308.524141] hub 5-0:1.0: 5 ports detected
[  308.524234] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[  308.524255] ohci_hcd 0000:00:14.5: OHCI Host Controller
[  308.524263] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
[  308.524279] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe4fc000
[  308.584058] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[  308.584060] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  308.584062] usb usb6: Product: OHCI Host Controller
[  308.584064] usb usb6: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[  308.584065] usb usb6: SerialNumber: 0000:00:14.5
[  308.584130] usb usb6: configuration #1 chosen from 1 choice
[  308.584149] hub 6-0:1.0: USB hub found
[  308.584158] hub 6-0:1.0: 2 ports detected
[  308.584246] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[  308.584268] ohci_hcd 0000:00:16.0: OHCI Host Controller
[  308.584279] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
[  308.584295] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe4f3000
[  308.644040] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[  308.644042] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  308.644044] usb usb7: Product: OHCI Host Controller
[  308.644046] usb usb7: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[  308.644047] usb usb7: SerialNumber: 0000:00:16.0
[  308.644112] usb usb7: configuration #1 chosen from 1 choice
[  308.644131] hub 7-0:1.0: USB hub found
[  308.644141] hub 7-0:1.0: 4 ports detected
[  308.932051] usb 4-5: new low speed USB device using ohci_hcd and address 2
[  309.101100] usb 4-5: New USB device found, idVendor=046d, idProduct=c03e
[  309.101102] usb 4-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  309.101104] usb 4-5: Product: USB-PS/2 Optical Mouse
[  309.101105] usb 4-5: Manufacturer: Logitech
[  309.101170] usb 4-5: configuration #1 chosen from 1 choice
[  309.108199] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.0/input/input7
[  309.108263] generic-usb 0003:046D:C03E.0003: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:12.0-5/input0

** Model information
sys_vendor: To Be Filled By O.E.M.
product_name: To Be Filled By O.E.M.
product_version: To Be Filled By O.E.M.
chassis_vendor: To Be Filled By O.E.M.
chassis_version: To Be Filled By O.E.M.
bios_vendor: American Megatrends Inc.
bios_version: P1.00
board_vendor: ASRock
board_name: 890GM Pro3
board_version:         

** Loaded modules:
Module                  Size  Used by
ohci_hcd               19212  0 
ehci_hcd               31135  0 
parport_pc             18855  0 
ppdev                   5030  0 
lp                      7462  0 
parport                27954  3 parport_pc,ppdev,lp
kvm_amd                31734  0 
kvm                   213800  1 kvm_amd
powernow_k8            10978  0 
cpufreq_stats           2659  0 
cpufreq_powersave        902  0 
cpufreq_conservative     5162  0 
cpufreq_userspace       1992  0 
nfsd                  254118  13 
exportfs                3170  1 nfsd
nfs                   240874  0 
lockd                  57603  2 nfsd,nfs
fscache                29834  1 nfs
nfs_acl                 2031  2 nfsd,nfs
auth_rpcgss            33460  2 nfsd,nfs
sunrpc                161285  12 nfsd,nfs,lockd,nfs_acl,auth_rpcgss
raid456                44500  1 
async_raid6_recov       5170  1 raid456
async_pq                3479  2 raid456,async_raid6_recov
raid6_pq               77179  2 async_raid6_recov,async_pq
async_xor               2478  3 raid456,async_raid6_recov,async_pq
xor                     4380  1 async_xor
async_memcpy            1198  2 raid456,async_raid6_recov
async_tx                1734  5 raid456,async_raid6_recov,async_pq,async_xor,async_memcpy
md_mod                 73808  2 raid456
ext2                   52969  0 
sha256_generic          8692  6 
aes_x86_64              7340  6 
aes_generic            25714  1 aes_x86_64
cbc                     2539  3 
fuse                   50206  1 
dm_crypt               10507  3 
w83627ehf              18659  0 
hwmon_vid               1828  1 w83627ehf
loop                   11799  0 
snd_hda_codec_atihdmi     2251  1 
snd_hda_codec_via      24497  0 
snd_hda_intel          19987  4 
snd_hda_codec          54244  3 snd_hda_codec_atihdmi,snd_hda_codec_via,snd_hda_intel
snd_hwdep               5380  1 snd_hda_codec
snd_pcm_oss            32591  0 
snd_mixer_oss          12606  1 snd_pcm_oss
snd_pcm                60471  3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_timer              15582  1 snd_pcm
snd                    46446  15 snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
fglrx                2368512  28 
soundcore               4598  1 snd
snd_page_alloc          6249  2 snd_hda_intel,snd_pcm
i2c_piix4               8328  0 
i2c_core               15712  1 i2c_piix4
shpchp                 26264  0 
edac_core              29261  0 
evdev                   7352  11 
pci_hotplug            21203  1 shpchp
pcspkr                  1699  0 
edac_mce_amd            6433  0 
button                  4650  0 
processor              30303  1 powernow_k8
ext4                  288969  3 
mbcache                 5050  2 ext2,ext4
jbd2                   67015  1 ext4
crc16                   1319  1 ext4
dm_mod                 53770  16 dm_crypt
sg                     18744  0 
sr_mod                 12602  0 
sd_mod                 29777  5 
cdrom                  29415  1 sr_mod
crc_t10dif              1276  1 sd_mod
usbhid                 33276  0 
hid                    62857  1 usbhid
sata_via                7853  1 
ahci                   32358  3 
libata                133584  2 sata_via,ahci
scsi_mod              122117  4 sg,sr_mod,sd_mod,libata
thermal                11674  0 
usbcore               121938  4 ohci_hcd,ehci_hcd,usbhid
r8169                  28877  0 
mii                     3210  1 r8169
firewire_ohci          19468  0 
nls_base                6377  1 usbcore
thermal_sys            11942  2 processor,thermal
firewire_core          36800  1 firewire_ohci
crc_itu_t               1307  1 firewire_core

** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS780 Host Bridge Alternate [1022:9601]
	Subsystem: ASRock Incorporation Device [1849:9601]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:01.0 PCI bridge [0604]: ASRock Incorporation Device [1849:9602] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
	I/O behind bridge: 0000a000-0000afff
	Memory behind bridge: fe500000-fe6fffff
	Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
	Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:09.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 4) [1022:9608] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 0000b000-0000bfff
	Memory behind bridge: fe700000-fe7fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:0a.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 5) [1022:9609] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: 0000c000-0000cfff
	Memory behind bridge: fe800000-fe8fffff
	Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] [1002:4391] (rev 40) (prog-if 01 [AHCI 1.0])
	Subsystem: ASRock Incorporation Device [1849:4391]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 27
	Region 0: I/O ports at 9000 [size=8]
	Region 1: I/O ports at 8000 [size=4]
	Region 2: I/O ports at 7000 [size=8]
	Region 3: I/O ports at 6000 [size=4]
	Region 4: I/O ports at 5000 [size=16]
	Region 5: Memory at fe4ffc00 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ahci

00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
	Subsystem: ASRock Incorporation Device [1849:4397]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at fe4fe000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci_hcd

00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
	Subsystem: ASRock Incorporation Device [1849:4396]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 17
	Region 0: Memory at fe4ff800 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
	Subsystem: ASRock Incorporation Device [1849:4397]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at fe4fd000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci_hcd

00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
	Subsystem: ASRock Incorporation Device [1849:4396]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 17
	Region 0: Memory at fe4ff400 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 41)
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383] (rev 40)
	Subsystem: ASRock Incorporation Device [1849:2620]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32, Cache Line Size: 64 bytes
	Interrupt: pin ? routed to IRQ 16
	Region 0: Memory at fe4f4000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: HDA Intel

00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host controller [1002:439d] (rev 40)
	Subsystem: ASRock Incorporation Device [1849:439d]
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (rev 40) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=64
	I/O behind bridge: 0000d000-0000efff
	Memory behind bridge: fe900000-fe9fffff
	Prefetchable memory behind bridge: f0000000-f00fffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:14.5 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
	Subsystem: ASRock Incorporation Device [1849:4399]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32, Cache Line Size: 64 bytes
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at fe4fc000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci_hcd

00:16.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
	Subsystem: ASRock Incorporation Device [1849:4397]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at fe4f3000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci_hcd

00:16.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
	Subsystem: ASRock Incorporation Device [1849:4396]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 17
	Region 0: Memory at fe4ff000 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration [1022:1200]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Address Map [1022:1201]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller [1022:1202]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control [1022:1203]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>

00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Link Control [1022:1204]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS880 [Radeon HD 4290] [1002:9714] (prog-if 00 [VGA controller])
	Subsystem: ASRock Incorporation Device [1849:9714]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 28
	Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
	Region 1: I/O ports at a000 [size=256]
	Region 2: Memory at fe6f0000 (32-bit, non-prefetchable) [size=64K]
	Region 5: Memory at fe500000 (32-bit, non-prefetchable) [size=1M]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: <access denied>
	Kernel driver in use: fglrx_pci

01:05.1 Audio device [0403]: ATI Technologies Inc RS880 Audio Device [Radeon HD 4200] [1002:970f]
	Subsystem: ASRock Incorporation Device [1849:970f]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 19
	Region 0: Memory at fe6e8000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: HDA Intel

02:00.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6315 Series Firewire Controller [1106:3403] (prog-if 10 [OHCI])
	Subsystem: ASRock Incorporation Device [1849:3403]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at fe7ff800 (64-bit, non-prefetchable) [size=2K]
	Region 2: I/O ports at b800 [size=256]
	Capabilities: <access denied>
	Kernel driver in use: firewire_ohci

03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06)
	Subsystem: ASRock Incorporation Motherboard (one of many) [1849:8168]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 26
	Region 0: I/O ports at c800 [size=256]
	Region 2: Memory at fdfff000 (64-bit, prefetchable) [size=4K]
	Region 4: Memory at fdff8000 (64-bit, prefetchable) [size=16K]
	Expansion ROM at fe8e0000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: r8169

04:06.0 RAID bus controller [0104]: VIA Technologies, Inc. VT6421 IDE RAID Controller [1106:3249] (rev 50)
	Subsystem: VIA Technologies, Inc. VT6421 IDE RAID Controller [1106:3249]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32
	Interrupt: pin A routed to IRQ 21
	Region 0: I/O ports at e800 [size=16]
	Region 1: I/O ports at e400 [size=16]
	Region 2: I/O ports at e000 [size=16]
	Region 3: I/O ports at d800 [size=16]
	Region 4: I/O ports at d400 [size=32]
	Region 5: I/O ports at d000 [size=256]
	Expansion ROM at f0000000 [disabled] [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: sata_via


** USB devices:
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 046d:c03e Logitech, Inc. Premium Optical Wheel Mouse (M-BT58)
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: squeeze/sid
  APT prefers testing
  APT policy: (990, 'testing'), (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii  debconf [debconf-2.0]         1.5.35     Debian configuration management sy
ii  initramfs-tools [linux-initra 0.98.2     tools for generating an initramfs
ii  linux-base                    2.6.32-21  Linux image base package
ii  module-init-tools             3.12-1     tools for managing Linux kernel mo

Versions of packages linux-image-2.6.32-5-amd64 recommends:
ii  firmware-linux-free           2.6.32-21  Binary firmware for various driver

Versions of packages linux-image-2.6.32-5-amd64 suggests:
pn  grub | lilo                   <none>     (no description available)
pn  linux-doc-2.6.32              <none>     (no description available)

Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn  firmware-bnx2                 <none>     (no description available)
pn  firmware-bnx2x                <none>     (no description available)
pn  firmware-ipw2x00              <none>     (no description available)
pn  firmware-ivtv                 <none>     (no description available)
pn  firmware-iwlwifi              <none>     (no description available)
pn  firmware-linux                <none>     (no description available)
pn  firmware-linux-nonfree        <none>     (no description available)
pn  firmware-qlogic               <none>     (no description available)
pn  firmware-ralink               <none>     (no description available)
pn  xen-hypervisor                <none>     (no description available)

-- debconf information:
  shared/kernel-image/really-run-bootloader: true
  linux-image-2.6.32-5-amd64/postinst/bootloader-test-error-2.6.32-5-amd64:
  linux-image-2.6.32-5-amd64/postinst/bootloader-error-2.6.32-5-amd64:
  linux-image-2.6.32-5-amd64/prerm/would-invalidate-boot-loader-2.6.32-5-amd64: true
  linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64:
  linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false
  linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true
  linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:



--- End Message ---
--- Begin Message ---
On Fri, Sep 10, 2010 at 09:25:19PM +0200, Konrad Zimmermann wrote:
> Subject: linux-image-2.6.32-5-amd64: usb 2.0 controller is managed as usb 1.1 by ohci-hcd
> Package: linux-2.6
> Version: 2.6.32-21
> Severity: normal
> 
> According to the manual, my board has 5 external and 4 internal USB 2.0 connectors.
> However as seen from lspci and lsusb, some of those are detected as USB 1.1.

This is normal.  USB 2.0 High Speed is a quite different protocol from
Low Speed and Full Speed, so every EHCI (USB 2.0 High Speed) controller
is paired with 1 or more OHCI controllers to handle devices operating at
Low or Full Speed.

> The funny thing is, that the same physical port may be recognised as USB 2.0 and
> after a reboot or reloding the ohci-hcd and ehci-hcd modules it is suddenly USB 1.1.
> The order in which these modules are loaded is apparently unimportant. If I only
> load ehci-hcd, only some ports will work (3 entrys in lsusb).
[...]
 
lsusb lists controllers and devices, not ports.  Each controller can handle
multiple ports.

Ben.

-- 
Ben Hutchings
We get into the habit of living before acquiring the habit of thinking.
                                                              - Albert Camus


--- End Message ---

Reply to: