Bug#594886: linux-image-2.6.32-5-amd64: Computer freeze on network traffic
Subject: linux-image-2.6.32-5-amd64: Computer freeze on network traffic
Package: linux-2.6 Version: 2.6.32-20 Severity: important
*** Please type your report below this line ***
On my Targa Traveller 826 WS, any kernel from 2.6.26 on will freeze
sooner or later (usually in less than two minutes if transfers achieve
over 50KB/s) when network traffic is allowed.
Typical system failures happen before half a minute has passed after
obtaining IP address through DHCP, and many times _during_ DHCP
negotiation.
It doesn't seem to be a NIC related problem as it fails when using the
integrated 8139 or a PCMCIA FA410TX card. I haven't tested wifi cards,
though.
If the IP is configured by hand, the system stays alive a bit longer,
but it will quickly die if high speed transfers (over 50-60KB/s in this
case) are started (typically, apt-get update or apt-get upgrade will
bring the system down).
AFAICS, it's such a total freeze I need to cold-boot the computer to
keep working. I'm making do currently with a custom 2.6.28.10 kernel
(latest version that allows me not to use the "tickless" option, IIRC).
-- Package-specific info:
** Version:
Linux version 2.6.32-5-amd64 (Debian 2.6.32-20) (ben@decadent.org.uk)
(gcc version 4.3.5 (Debian 4.3.5-2) ) #1 SMP Thu Aug 12 13:01:50 UTC 2010
** Command line:
root=/dev/sda8 vga=ext ro text
** Not tainted
** Kernel log:
[ 0.830090] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 0.830150] ohci_hcd 0000:00:13.1: new USB bus registered, assigned
bus number 3
[ 0.830229] ohci_hcd 0000:00:13.1: irq 19, io mem 0xfbdfe000
[ 0.886879] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.886932] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.886989] usb usb3: Product: OHCI Host Controller
[ 0.887040] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 0.887092] usb usb3: SerialNumber: 0000:00:13.1
[ 0.887264] usb usb3: configuration #1 chosen from 1 choice
[ 0.887372] hub 3-0:1.0: USB hub found
[ 0.887433] hub 3-0:1.0: 4 ports detected
[ 0.909898] ata1.00: ATA-8: WDC WD3200BEVE-00A0HT0, 11.01A11, max
UDMA/100
[ 0.909952] ata1.00: 625142448 sectors, multi 16: LBA48
[ 0.924321] ata1.00: configured for UDMA/100
[ 0.924498] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEVE-0
11.0 PQ: 0 ANSI: 5
[ 1.104893] ata2.00: ATAPI: PIONEER DVD-RW DVR-K15, 1.11, max UDMA/33
[ 1.136864] ata2.00: configured for UDMA/33
[ 1.150832] scsi 1:0:0:0: CD-ROM PIONEER DVD-RW DVR-K15
1.11 PQ: 0 ANSI: 5
[ 1.170903] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320
GB/298 GiB)
[ 1.171017] sd 0:0:0:0: [sda] Write Protect is off
[ 1.171069] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.171090] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.171283] sda:sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2
cdda tray
[ 1.199076] Uniform CD-ROM driver Revision: 3.20
[ 1.199339] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.227439] sda1 sda2 < sda5 sda6
[ 1.272085] firewire_core: created device fw0: GUID 0010dc00007db707,
S400
[ 1.276836] sda7 sda8 sda9 sda10 sda11 >
[ 1.325045] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.335823] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.336248] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 6.876139] kjournald starting. Commit interval 5 seconds
[ 6.876205] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.466964] udev: starting version 146
[ 8.677407] ACPI: duty_cycle spans bit 4
[ 8.677472] Marking TSC unstable due to TSC halts in idle
[ 8.677668] processor LNXCPU:00: registered as cooling_device0
[ 8.720203] Switching to clocksource acpi_pm
[ 8.814199] ACPI: AC Adapter [ADP1] (on-line)
[ 8.815667] input: Lid Switch as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 8.817848] ACPI: Lid Switch [LID0]
[ 8.818000] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[ 8.818063] ACPI: Sleep Button [SLPB]
[ 8.818194] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 8.818253] ACPI: Power Button [PWRB]
[ 8.818377] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 8.818436] ACPI: Power Button [PWRF]
[ 8.825094] ACPI: Battery Slot [BAT1] (battery absent)
[ 9.163788] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 9.170190] EDAC MC: Ver: 2.1.0 Aug 12 2010
[ 9.204931] EDAC amd64_edac: Ver: 3.2.0 Aug 12 2010
[ 9.205096] yenta_cardbus 0000:02:04.0: CardBus bridge found [1462:0291]
[ 9.206069] EDAC amd64: This node reports that Memory ECC is
currently disabled, set F3x44[22] (0000:00:18.3).
[ 9.206134] EDAC amd64: ECC disabled in the BIOS or no ECC
capability, module will not load.
[ 9.206136] Either enable ECC checking or force module loading by
setting 'ecc_enable_override'.
[ 9.206138] (Note that use of the override may cause unknown side
effects.)
[ 9.206352] amd64_edac: probe of 0000:00:18.2 failed with error -22
[ 9.269708] ACPI: I/O resource piix4_smbus [0xc800-0xc807] conflicts
with ACPI region SMI0 [0xc800-0xc80e]
[ 9.269773] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 9.332944] yenta_cardbus 0000:02:04.0: ISA IRQ mask 0x0cb8, PCI irq 19
[ 9.333004] yenta_cardbus 0000:02:04.0: Socket status: 30000006
[ 9.333063] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge I/O
window: 0xe000 - 0xefff
[ 9.333122] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge
Memory window: 0xfbf00000 - 0xfbffffff
[ 9.333181] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge
Memory window: 0x60000000 - 0x69ffffff
[ 9.333698] yenta_cardbus 0000:02:04.1: CardBus bridge found [1462:0291]
[ 9.363844] elantech.c: assuming hardware version 1, firmware version
1.33
[ 9.391825] elantech.c: Synaptics capabilities query result 0x02,
0x02, 0x64.
[ 9.460967] yenta_cardbus 0000:02:04.1: ISA IRQ mask 0x0cb8, PCI irq 20
[ 9.461028] yenta_cardbus 0000:02:04.1: Socket status: 30000006
[ 9.461081] pci_bus 0000:02: Raising subordinate bus# of parent bus
(#02) from #04 to #07
[ 9.461149] yenta_cardbus 0000:02:04.1: pcmcia: parent PCI bridge I/O
window: 0xe000 - 0xefff
[ 9.461208] yenta_cardbus 0000:02:04.1: pcmcia: parent PCI bridge
Memory window: 0xfbf00000 - 0xfbffffff
[ 9.461267] yenta_cardbus 0000:02:04.1: pcmcia: parent PCI bridge
Memory window: 0x60000000 - 0x69ffffff
[ 9.606458] input: ETPS/2 Elantech Touchpad as
/devices/platform/i8042/serio2/input/input7
[ 10.545596] ATI IXP MC97 controller 0000:00:14.6: PCI INT B -> GSI 17
(level, low) -> IRQ 17
[ 10.568723] ATI IXP AC97 controller 0000:00:14.5: PCI INT B -> GSI 17
(level, low) -> IRQ 17
[ 11.594573] EXT3 FS on sda8, internal journal
[ 11.807123] Uniform Multi-Platform E-IDE driver
[ 11.819160] ide-cd driver 5.00
[ 11.825962] ide-gd driver 1.18
[ 11.829575] ide_generic: please use "probe_mask=0x3f" module
parameter for probing all legacy ISA IDE ports
[ 11.926477] device-mapper: uevent: version 1.0.3
[ 11.927096] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01)
initialised: dm-devel@redhat.com
[ 38.837780] kjournald starting. Commit interval 5 seconds
[ 38.838381] EXT3 FS on sda7, internal journal
[ 38.838477] EXT3-fs: mounted filesystem with ordered data mode.
[ 40.567146] kjournald starting. Commit interval 5 seconds
[ 40.567505] EXT3 FS on sda9, internal journal
[ 40.567602] EXT3-fs: mounted filesystem with ordered data mode.
[ 42.596992] kjournald starting. Commit interval 5 seconds
[ 42.597334] EXT3 FS on sda10, internal journal
[ 42.597431] EXT3-fs: mounted filesystem with ordered data mode.
[ 44.371866] kjournald starting. Commit interval 5 seconds
[ 44.372227] EXT3 FS on sda11, internal journal
[ 44.372324] EXT3-fs: mounted filesystem with ordered data mode.
[ 48.784214] fuse init (API version 7.13)
[ 50.530108] eth0: link down
[ 50.530752] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 56.136642] lp: driver loaded but no devices found
[ 56.148969] ppdev: user-space parallel port driver
** Model information
sys_vendor: MICRO-STAR INT'L CO.,LTD
product_name: MS-1029
product_version: 0291
chassis_vendor: MICRO-STAR INT'L CO.,LTD
chassis_version: To Be Filled By O.E.M.
bios_vendor: American Megatrends Inc.
bios_version: A1029ATE V2.81
** Loaded modules:
Module Size Used by
ppdev 5030 0
lp 7462 0
parport 27954 2 ppdev,lp
fuse 50190 1
dm_snapshot 18481 0
dm_mirror 10923 0
dm_region_hash 6680 1 dm_mirror
dm_log 7381 2 dm_mirror,dm_region_hash
dm_mod 53754 3 dm_snapshot,dm_mirror,dm_log
firewire_sbp2 11514 0
ide_generic 1121 0 [permanent]
ide_gd_mod 20433 0
ide_cd_mod 24744 0
ide_core 71722 3 ide_generic,ide_gd_mod,ide_cd_mod
snd_atiixp 11221 0
snd_atiixp_modem 8139 0
snd_ac97_codec 99186 2 snd_atiixp,snd_atiixp_modem
ac97_bus 1086 1 snd_ac97_codec
snd_pcm_oss 32591 0
snd_mixer_oss 12606 1 snd_pcm_oss
snd_pcm 60471 4
snd_atiixp,snd_atiixp_modem,snd_ac97_codec,snd_pcm_oss
snd_seq_midi 4400 0
snd_rawmidi 15515 1 snd_seq_midi
snd_seq_midi_event 4628 1 snd_seq_midi
snd_seq 42881 2 snd_seq_midi,snd_seq_midi_event
joydev 8411 0
pcmcia 19474 0
snd_timer 15582 2 snd_pcm,snd_seq
snd_seq_device 4493 3 snd_seq_midi,snd_rawmidi,snd_seq
snd 46446 10
snd_atiixp,snd_atiixp_modem,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
i2c_piix4 8328 0
soundcore 4598 1 snd
yenta_socket 19115 2
rsrc_nonstatic 7294 1 yenta_socket
serio_raw 3752 0
snd_page_alloc 6249 3 snd_atiixp,snd_atiixp_modem,snd_pcm
k8temp 3155 0
i2c_core 15712 1 i2c_piix4
pcspkr 1699 0
edac_core 29261 0
pcmcia_core 24118 3 pcmcia,yenta_socket,rsrc_nonstatic
psmouse 49777 0
evdev 7352 10
edac_mce_amd 6433 0
battery 4998 0
button 4650 0
ac 2192 0
processor 30247 1
ext3 106518 5
jbd 37085 1 ext3
mbcache 5050 1 ext3
sg 18744 0
sr_mod 12602 0
sd_mod 29777 6
crc_t10dif 1276 1 sd_mod
cdrom 29415 2 ide_cd_mod,sr_mod
ata_generic 2983 0
ohci_hcd 19212 0
pata_atiixp 3489 5
firewire_ohci 19468 0
libata 133584 2 ata_generic,pata_atiixp
thermal 11674 0
8139too 17981 0
mii 3210 1 8139too
firewire_core 36800 2 firewire_sbp2,firewire_ohci
crc_itu_t 1307 1 firewire_core
thermal_sys 11942 2 processor,thermal
ehci_hcd 31135 0
scsi_mod 122117 5 firewire_sbp2,sg,sr_mod,sd_mod,libata
usbcore 121943 3 ohci_hcd,ehci_hcd
nls_base 6361 1 usbcore
** Network interface configuration:
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet dhcp
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast
state DOWN qlen 1000
link/ether 00:0c:76:f7:dd:17 brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo: 30016 376 0 0 0 0 0 0
30016 376 0 0 0 0 0 0
eth0: 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
376 total packets received
0 forwarded
0 incoming packets discarded
376 incoming packets delivered
376 requests sent out
Icmp:
184 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 184
184 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 184
IcmpMsg:
InType3: 184
OutType3: 184
Tcp:
0 active connections openings
0 passive connection openings
0 failed connection attempts
0 connection resets received
0 connections established
0 segments received
0 segments send out
0 segments retransmited
0 bad segments received.
0 resets sent
Udp:
8 packets received
184 packets to unknown port received.
0 packet receive errors
192 packets sent
UdpLite:
TcpExt:
0 packet headers predicted
IpExt:
InOctets: 30016
OutOctets: 30016
*** Device features:
eth0: 0x829
lo: 0x13865
** PCI devices:
00:00.0 Host bridge [0600]: ATI Technologies Inc Radeon Xpress 200
(RS480/RS482/RX480/RX482) Chipset - Host bridge [1002:5951]
Subsystem: Micro-Star International Co., Ltd. Device [1462:0291]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
00:02.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI-X Root Port
[1002:5a34] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fbe00000-fbefffff
Prefetchable memory behind bridge: f0000000-faffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v1) Root Port (Slot-), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0
<64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0100c Data: 4161
Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:5951]
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+
MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Kernel driver in use: pcieport
00:13.0 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB Host
Controller [1002:4374] (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc IXP SB400 USB Host Controller [1002:4374]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fbdfd000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Kernel driver in use: ohci_hcd
00:13.1 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB Host
Controller [1002:4375] (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc IXP SB400 USB Host Controller [1002:4375]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fbdfe000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Kernel driver in use: ohci_hcd
00:13.2 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB2 Host
Controller [1002:4373] (prog-if 20 [EHCI])
Subsystem: ATI Technologies Inc IXP SB400 USB2 Host Controller [1002:4373]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fbdff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Kernel driver in use: ehci_hcd
00:14.0 SMBus [0c05]: ATI Technologies Inc IXP SB400 SMBus Controller
[1002:4372] (rev 10)
Subsystem: Micro-Star International Co., Ltd. Device [1462:0291]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: I/O ports at c800 [size=16]
Region 1: Memory at fbdfc400 (32-bit, non-prefetchable) [size=1K]
Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+
00:14.1 IDE interface [0101]: ATI Technologies Inc IXP SB400 IDE
Controller [1002:4376] (prog-if 8a [Master SecP PriP])
Subsystem: Micro-Star International Co., Ltd. Device [1462:0291]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ff00 [size=16]
Capabilities: [70] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Kernel driver in use: pata_atiixp
00:14.3 ISA bridge [0601]: ATI Technologies Inc IXP SB400 PCI-ISA Bridge
[1002:4377]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: ATI Technologies Inc IXP SB400 PCI-PCI Bridge
[1002:4371] (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=02, subordinate=07, sec-latency=64
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fbf00000-fbffffff
Prefetchable memory behind bridge: 60000000-69ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 Multimedia audio controller [0401]: ATI Technologies Inc IXP
SB400 AC'97 Audio Controller [1002:4370] (rev 01)
Subsystem: Micro-Star International Co., Ltd. Device [1462:0291]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fbdfc800 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Kernel driver in use: ATI IXP AC97 controller
00:14.6 Modem [0703]: ATI Technologies Inc SB400 AC'97 Modem Controller
[1002:4378] (rev 01) (prog-if 00 [Generic])
Subsystem: Micro-Star International Co., Ltd. MS-1013 Notebook [1462:0131]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fbdfcc00 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Kernel driver in use: ATI IXP MC97 controller
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: [80] HyperTransport: Host or Secondary Interface
Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave-
<EOCErr- DUL-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
IsocEn- LSEn+ ExtCTL- 64b-
Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit
DwFcInEn- LWO=16bit DwFcOutEn-
Revision ID: 1.02
Link Frequency: 800MHz
Link Error: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+
800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- ExtRS-
UCnfE-
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel driver in use: k8temp
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon
Mobility X700 (PCIE) [1002:5653] (prog-if 00 [VGA controller])
Subsystem: Micro-Star International Co., Ltd. Device [1462:0291]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at d800 [size=256]
Region 2: Memory at fbef0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at fbec0000 [disabled] [size=128K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns, L1 <4us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0
<256ns, L1 <2us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+
MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
02:03.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Micro-Star International Co., Ltd. MS-1013 Notebook [1462:0131]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at e800 [size=256]
Region 1: Memory at fbfffc00 (32-bit, non-prefetchable) [size=256]
Expansion ROM at 68000000 [disabled] [size=64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: 8139too
02:04.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev ac)
Subsystem: Micro-Star International Co., Ltd. Device [1462:0291]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fbf00000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=03, sec-latency=176
Memory window 0: 60000000-63fff000 (prefetchable)
Memory window 1: 6c000000-6ffff000
I/O window 0: 0000e000-0000e0ff
I/O window 1: 0000ec00-0000ecff
BridgeCtl: Parity+ SERR+ ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
02:04.1 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev ac)
Subsystem: Micro-Star International Co., Ltd. Device [1462:0291]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin B routed to IRQ 20
Region 0: Memory at fbf01000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=04, subordinate=07, sec-latency=176
Memory window 0: 64000000-67fff000 (prefetchable)
Memory window 1: 70000000-73fff000
I/O window 0: 00001000-000010ff
I/O window 1: 00001400-000014ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
02:04.2 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C552 IEEE 1394
Controller [1180:0552] (rev 04) (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:0291]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max)
Interrupt: pin C routed to IRQ 21
Region 0: Memory at fbfff000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME+
Kernel driver in use: firewire_ohci
02:09.0 Ethernet controller [0200]: InProComm Inc. IPN 2220 802.11g
[17fe:2220]
Subsystem: Micro-Star International Co., Ltd. Device [1462:6855]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 8000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at e400 [size=32]
Region 1: Memory at fbfff800 (32-bit, non-prefetchable) [size=32]
Region 2: Memory at fbffe800 (32-bit, non-prefetchable) [size=2K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
** USB devices:
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (650, 'testing'), (625, 'stable'), (600, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-amd64 (SMP w/1 CPU core)
Locale: LANG=es_ES@euro, LC_CTYPE=es_ES@euro (charmap=ISO-8859-15)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii debconf [debconf-2.0] 1.5.35 Debian configuration
management sy
ii initramfs-tools [linux-initra 0.98.1 tools for generating an
initramfs
ii linux-base 2.6.32-20 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux
kernel mo
Versions of packages linux-image-2.6.32-5-amd64 recommends:
ii firmware-linux-free 2.6.32-20 Binary firmware for various
driver
Versions of packages linux-image-2.6.32-5-amd64 suggests:
ii grub 0.97-53 GRand Unified Bootloader
(Legacy v
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64:
false
linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64:
true
linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/postinst/bootloader-test-error-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/postinst/bootloader-error-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/prerm/would-invalidate-boot-loader-2.6.32-5-amd64:
true
linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64:
--
Ta otro mail...
Marcos (cualquier parecido con la coincidencia es pura realidad)
Subject: linux-image-2.6.32-5-amd64: Computer freeze on network traffic
Package: linux-2.6 Version: 2.6.32-20 Severity: important
*** Please type your report below this line ***
On my Targa Traveller 826 WS, any kernel from 2.6.26 on will freeze sooner
or later (usually in less than two minutes if transfers work above 50KB/s)
when network traffic is allowed.
Typical system failures happen before half a minute has passed after obtaining
IP address through DHCP, and many times _during_ DHCP negotiation.
It doesn't seem to be a NIC related problem as it fails when using the
integrated 8139 or a PCMCIA FA410TX card. I haven't tested wifi cards, though.
If the IP is configured by hand, the system stays alive a bit longer, but
it will quickly die if high speed transfers (over 50-60KB/s in this case)
are started (typically, apt-get update or apt-get upgrade will bring the
system down).
AFAIK, it's such a total freeze I need to cold-boot the computer to keep
working. I'm making do currently with a custom 2.6.28.10 kernel (latest
version that allows me not to use the "tickless" option, IIRC).
-- Package-specific info:
** Version:
Linux version 2.6.32-5-amd64 (Debian 2.6.32-20) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-2) ) #1 SMP Thu Aug 12 13:01:50 UTC 2010
** Command line:
root=/dev/sda8 vga=ext ro text
** Not tainted
** Kernel log:
[ 0.830090] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 0.830150] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 0.830229] ohci_hcd 0000:00:13.1: irq 19, io mem 0xfbdfe000
[ 0.886879] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.886932] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.886989] usb usb3: Product: OHCI Host Controller
[ 0.887040] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 0.887092] usb usb3: SerialNumber: 0000:00:13.1
[ 0.887264] usb usb3: configuration #1 chosen from 1 choice
[ 0.887372] hub 3-0:1.0: USB hub found
[ 0.887433] hub 3-0:1.0: 4 ports detected
[ 0.909898] ata1.00: ATA-8: WDC WD3200BEVE-00A0HT0, 11.01A11, max UDMA/100
[ 0.909952] ata1.00: 625142448 sectors, multi 16: LBA48
[ 0.924321] ata1.00: configured for UDMA/100
[ 0.924498] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEVE-0 11.0 PQ: 0 ANSI: 5
[ 1.104893] ata2.00: ATAPI: PIONEER DVD-RW DVR-K15, 1.11, max UDMA/33
[ 1.136864] ata2.00: configured for UDMA/33
[ 1.150832] scsi 1:0:0:0: CD-ROM PIONEER DVD-RW DVR-K15 1.11 PQ: 0 ANSI: 5
[ 1.170903] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.171017] sd 0:0:0:0: [sda] Write Protect is off
[ 1.171069] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.171090] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.171283] sda:sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 1.199076] Uniform CD-ROM driver Revision: 3.20
[ 1.199339] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.227439] sda1 sda2 < sda5 sda6
[ 1.272085] firewire_core: created device fw0: GUID 0010dc00007db707, S400
[ 1.276836] sda7 sda8 sda9 sda10 sda11 >
[ 1.325045] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.335823] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.336248] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 6.876139] kjournald starting. Commit interval 5 seconds
[ 6.876205] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.466964] udev: starting version 146
[ 8.677407] ACPI: duty_cycle spans bit 4
[ 8.677472] Marking TSC unstable due to TSC halts in idle
[ 8.677668] processor LNXCPU:00: registered as cooling_device0
[ 8.720203] Switching to clocksource acpi_pm
[ 8.814199] ACPI: AC Adapter [ADP1] (on-line)
[ 8.815667] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 8.817848] ACPI: Lid Switch [LID0]
[ 8.818000] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[ 8.818063] ACPI: Sleep Button [SLPB]
[ 8.818194] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 8.818253] ACPI: Power Button [PWRB]
[ 8.818377] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 8.818436] ACPI: Power Button [PWRF]
[ 8.825094] ACPI: Battery Slot [BAT1] (battery absent)
[ 9.163788] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 9.170190] EDAC MC: Ver: 2.1.0 Aug 12 2010
[ 9.204931] EDAC amd64_edac: Ver: 3.2.0 Aug 12 2010
[ 9.205096] yenta_cardbus 0000:02:04.0: CardBus bridge found [1462:0291]
[ 9.206069] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
[ 9.206134] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 9.206136] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 9.206138] (Note that use of the override may cause unknown side effects.)
[ 9.206352] amd64_edac: probe of 0000:00:18.2 failed with error -22
[ 9.269708] ACPI: I/O resource piix4_smbus [0xc800-0xc807] conflicts with ACPI region SMI0 [0xc800-0xc80e]
[ 9.269773] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.332944] yenta_cardbus 0000:02:04.0: ISA IRQ mask 0x0cb8, PCI irq 19
[ 9.333004] yenta_cardbus 0000:02:04.0: Socket status: 30000006
[ 9.333063] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge I/O window: 0xe000 - 0xefff
[ 9.333122] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge Memory window: 0xfbf00000 - 0xfbffffff
[ 9.333181] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge Memory window: 0x60000000 - 0x69ffffff
[ 9.333698] yenta_cardbus 0000:02:04.1: CardBus bridge found [1462:0291]
[ 9.363844] elantech.c: assuming hardware version 1, firmware version 1.33
[ 9.391825] elantech.c: Synaptics capabilities query result 0x02, 0x02, 0x64.
[ 9.460967] yenta_cardbus 0000:02:04.1: ISA IRQ mask 0x0cb8, PCI irq 20
[ 9.461028] yenta_cardbus 0000:02:04.1: Socket status: 30000006
[ 9.461081] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #04 to #07
[ 9.461149] yenta_cardbus 0000:02:04.1: pcmcia: parent PCI bridge I/O window: 0xe000 - 0xefff
[ 9.461208] yenta_cardbus 0000:02:04.1: pcmcia: parent PCI bridge Memory window: 0xfbf00000 - 0xfbffffff
[ 9.461267] yenta_cardbus 0000:02:04.1: pcmcia: parent PCI bridge Memory window: 0x60000000 - 0x69ffffff
[ 9.606458] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio2/input/input7
[ 10.545596] ATI IXP MC97 controller 0000:00:14.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 10.568723] ATI IXP AC97 controller 0000:00:14.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 11.594573] EXT3 FS on sda8, internal journal
[ 11.807123] Uniform Multi-Platform E-IDE driver
[ 11.819160] ide-cd driver 5.00
[ 11.825962] ide-gd driver 1.18
[ 11.829575] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[ 11.926477] device-mapper: uevent: version 1.0.3
[ 11.927096] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 38.837780] kjournald starting. Commit interval 5 seconds
[ 38.838381] EXT3 FS on sda7, internal journal
[ 38.838477] EXT3-fs: mounted filesystem with ordered data mode.
[ 40.567146] kjournald starting. Commit interval 5 seconds
[ 40.567505] EXT3 FS on sda9, internal journal
[ 40.567602] EXT3-fs: mounted filesystem with ordered data mode.
[ 42.596992] kjournald starting. Commit interval 5 seconds
[ 42.597334] EXT3 FS on sda10, internal journal
[ 42.597431] EXT3-fs: mounted filesystem with ordered data mode.
[ 44.371866] kjournald starting. Commit interval 5 seconds
[ 44.372227] EXT3 FS on sda11, internal journal
[ 44.372324] EXT3-fs: mounted filesystem with ordered data mode.
[ 48.784214] fuse init (API version 7.13)
[ 50.530108] eth0: link down
[ 50.530752] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 56.136642] lp: driver loaded but no devices found
[ 56.148969] ppdev: user-space parallel port driver
** Model information
sys_vendor: MICRO-STAR INT'L CO.,LTD
product_name: MS-1029
product_version: 0291
chassis_vendor: MICRO-STAR INT'L CO.,LTD
chassis_version: To Be Filled By O.E.M.
bios_vendor: American Megatrends Inc.
bios_version: A1029ATE V2.81
** Loaded modules:
Module Size Used by
ppdev 5030 0
lp 7462 0
parport 27954 2 ppdev,lp
fuse 50190 1
dm_snapshot 18481 0
dm_mirror 10923 0
dm_region_hash 6680 1 dm_mirror
dm_log 7381 2 dm_mirror,dm_region_hash
dm_mod 53754 3 dm_snapshot,dm_mirror,dm_log
firewire_sbp2 11514 0
ide_generic 1121 0 [permanent]
ide_gd_mod 20433 0
ide_cd_mod 24744 0
ide_core 71722 3 ide_generic,ide_gd_mod,ide_cd_mod
snd_atiixp 11221 0
snd_atiixp_modem 8139 0
snd_ac97_codec 99186 2 snd_atiixp,snd_atiixp_modem
ac97_bus 1086 1 snd_ac97_codec
snd_pcm_oss 32591 0
snd_mixer_oss 12606 1 snd_pcm_oss
snd_pcm 60471 4 snd_atiixp,snd_atiixp_modem,snd_ac97_codec,snd_pcm_oss
snd_seq_midi 4400 0
snd_rawmidi 15515 1 snd_seq_midi
snd_seq_midi_event 4628 1 snd_seq_midi
snd_seq 42881 2 snd_seq_midi,snd_seq_midi_event
joydev 8411 0
pcmcia 19474 0
snd_timer 15582 2 snd_pcm,snd_seq
snd_seq_device 4493 3 snd_seq_midi,snd_rawmidi,snd_seq
snd 46446 10 snd_atiixp,snd_atiixp_modem,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
i2c_piix4 8328 0
soundcore 4598 1 snd
yenta_socket 19115 2
rsrc_nonstatic 7294 1 yenta_socket
serio_raw 3752 0
snd_page_alloc 6249 3 snd_atiixp,snd_atiixp_modem,snd_pcm
k8temp 3155 0
i2c_core 15712 1 i2c_piix4
pcspkr 1699 0
edac_core 29261 0
pcmcia_core 24118 3 pcmcia,yenta_socket,rsrc_nonstatic
psmouse 49777 0
evdev 7352 10
edac_mce_amd 6433 0
battery 4998 0
button 4650 0
ac 2192 0
processor 30247 1
ext3 106518 5
jbd 37085 1 ext3
mbcache 5050 1 ext3
sg 18744 0
sr_mod 12602 0
sd_mod 29777 6
crc_t10dif 1276 1 sd_mod
cdrom 29415 2 ide_cd_mod,sr_mod
ata_generic 2983 0
ohci_hcd 19212 0
pata_atiixp 3489 5
firewire_ohci 19468 0
libata 133584 2 ata_generic,pata_atiixp
thermal 11674 0
8139too 17981 0
mii 3210 1 8139too
firewire_core 36800 2 firewire_sbp2,firewire_ohci
crc_itu_t 1307 1 firewire_core
thermal_sys 11942 2 processor,thermal
ehci_hcd 31135 0
scsi_mod 122117 5 firewire_sbp2,sg,sr_mod,sd_mod,libata
usbcore 121943 3 ohci_hcd,ehci_hcd
nls_base 6361 1 usbcore
** Network interface configuration:
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet dhcp
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
link/ether 00:0c:76:f7:dd:17 brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 30016 376 0 0 0 0 0 0 30016 376 0 0 0 0 0 0
eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
376 total packets received
0 forwarded
0 incoming packets discarded
376 incoming packets delivered
376 requests sent out
Icmp:
184 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 184
184 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 184
IcmpMsg:
InType3: 184
OutType3: 184
Tcp:
0 active connections openings
0 passive connection openings
0 failed connection attempts
0 connection resets received
0 connections established
0 segments received
0 segments send out
0 segments retransmited
0 bad segments received.
0 resets sent
Udp:
8 packets received
184 packets to unknown port received.
0 packet receive errors
192 packets sent
UdpLite:
TcpExt:
0 packet headers predicted
IpExt:
InOctets: 30016
OutOctets: 30016
*** Device features:
eth0: 0x829
lo: 0x13865
** PCI devices:
00:00.0 Host bridge [0600]: ATI Technologies Inc Radeon Xpress 200 (RS480/RS482/RX480/RX482) Chipset - Host bridge [1002:5951]
Subsystem: Micro-Star International Co., Ltd. Device [1462:0291]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
00:02.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI-X Root Port [1002:5a34] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fbe00000-fbefffff
Prefetchable memory behind bridge: f0000000-faffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v1) Root Port (Slot-), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0100c Data: 4161
Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:5951]
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Kernel driver in use: pcieport
00:13.0 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB Host Controller [1002:4374] (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc IXP SB400 USB Host Controller [1002:4374]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fbdfd000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Kernel driver in use: ohci_hcd
00:13.1 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB Host Controller [1002:4375] (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc IXP SB400 USB Host Controller [1002:4375]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fbdfe000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Kernel driver in use: ohci_hcd
00:13.2 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB2 Host Controller [1002:4373] (prog-if 20 [EHCI])
Subsystem: ATI Technologies Inc IXP SB400 USB2 Host Controller [1002:4373]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fbdff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Kernel driver in use: ehci_hcd
00:14.0 SMBus [0c05]: ATI Technologies Inc IXP SB400 SMBus Controller [1002:4372] (rev 10)
Subsystem: Micro-Star International Co., Ltd. Device [1462:0291]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: I/O ports at c800 [size=16]
Region 1: Memory at fbdfc400 (32-bit, non-prefetchable) [size=1K]
Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+
00:14.1 IDE interface [0101]: ATI Technologies Inc IXP SB400 IDE Controller [1002:4376] (prog-if 8a [Master SecP PriP])
Subsystem: Micro-Star International Co., Ltd. Device [1462:0291]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ff00 [size=16]
Capabilities: [70] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Kernel driver in use: pata_atiixp
00:14.3 ISA bridge [0601]: ATI Technologies Inc IXP SB400 PCI-ISA Bridge [1002:4377]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: ATI Technologies Inc IXP SB400 PCI-PCI Bridge [1002:4371] (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=02, subordinate=07, sec-latency=64
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fbf00000-fbffffff
Prefetchable memory behind bridge: 60000000-69ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 Multimedia audio controller [0401]: ATI Technologies Inc IXP SB400 AC'97 Audio Controller [1002:4370] (rev 01)
Subsystem: Micro-Star International Co., Ltd. Device [1462:0291]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fbdfc800 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Kernel driver in use: ATI IXP AC97 controller
00:14.6 Modem [0703]: ATI Technologies Inc SB400 AC'97 Modem Controller [1002:4378] (rev 01) (prog-if 00 [Generic])
Subsystem: Micro-Star International Co., Ltd. MS-1013 Notebook [1462:0131]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fbdfcc00 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Kernel driver in use: ATI IXP MC97 controller
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [80] HyperTransport: Host or Secondary Interface
Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
Revision ID: 1.02
Link Frequency: 800MHz
Link Error: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- ExtRS- UCnfE-
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: k8temp
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon Mobility X700 (PCIE) [1002:5653] (prog-if 00 [VGA controller])
Subsystem: Micro-Star International Co., Ltd. Device [1462:0291]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at d800 [size=256]
Region 2: Memory at fbef0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at fbec0000 [disabled] [size=128K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns, L1 <4us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <2us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
02:03.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Micro-Star International Co., Ltd. MS-1013 Notebook [1462:0131]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at e800 [size=256]
Region 1: Memory at fbfffc00 (32-bit, non-prefetchable) [size=256]
Expansion ROM at 68000000 [disabled] [size=64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: 8139too
02:04.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev ac)
Subsystem: Micro-Star International Co., Ltd. Device [1462:0291]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fbf00000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=03, sec-latency=176
Memory window 0: 60000000-63fff000 (prefetchable)
Memory window 1: 6c000000-6ffff000
I/O window 0: 0000e000-0000e0ff
I/O window 1: 0000ec00-0000ecff
BridgeCtl: Parity+ SERR+ ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
02:04.1 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev ac)
Subsystem: Micro-Star International Co., Ltd. Device [1462:0291]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin B routed to IRQ 20
Region 0: Memory at fbf01000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=04, subordinate=07, sec-latency=176
Memory window 0: 64000000-67fff000 (prefetchable)
Memory window 1: 70000000-73fff000
I/O window 0: 00001000-000010ff
I/O window 1: 00001400-000014ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
02:04.2 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C552 IEEE 1394 Controller [1180:0552] (rev 04) (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:0291]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max)
Interrupt: pin C routed to IRQ 21
Region 0: Memory at fbfff000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME+
Kernel driver in use: firewire_ohci
02:09.0 Ethernet controller [0200]: InProComm Inc. IPN 2220 802.11g [17fe:2220]
Subsystem: Micro-Star International Co., Ltd. Device [1462:6855]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 8000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at e400 [size=32]
Region 1: Memory at fbfff800 (32-bit, non-prefetchable) [size=32]
Region 2: Memory at fbffe800 (32-bit, non-prefetchable) [size=2K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
** USB devices:
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (650, 'testing'), (625, 'stable'), (600, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-amd64 (SMP w/1 CPU core)
Locale: LANG=es_ES@euro, LC_CTYPE=es_ES@euro (charmap=ISO-8859-15)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii debconf [debconf-2.0] 1.5.35 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.1 tools for generating an initramfs
ii linux-base 2.6.32-20 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-amd64 recommends:
ii firmware-linux-free 2.6.32-20 Binary firmware for various driver
Versions of packages linux-image-2.6.32-5-amd64 suggests:
ii grub 0.97-53 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false
linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true
linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/postinst/bootloader-test-error-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/postinst/bootloader-error-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/prerm/would-invalidate-boot-loader-2.6.32-5-amd64: true
linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64:
Reply to: