--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.32-5-amd64: Module snd_pcsp should not be loaded
- From: Salvo Tomaselli <tiposchi@tiscali.it>
- Date: Thu, 26 Aug 2010 17:48:06 +0200
- Message-id: <20100826154806.1959.83801.reportbug@localhost>
Package: linux-2.6
Version: 2.6.32-21
Severity: normal
It is my opinion that the module snd_pcsp should not be loaded on my machine,
mainly because my machine doesn't have a pc speaker.
The second problem is that it becomes the default audio device and the result
is that all the softwares use that audio device by default, and so i can't hear
anything.
-- Package-specific info:
** Version:
Linux version 2.6.32-5-amd64 (Debian 2.6.32-21) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-2) ) #1 SMP Wed Aug 25 13:59:41 UTC 2010
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=/dev/sda4 ro
** Not tainted
** Kernel log:
[ 5.261972] applesmc: - Model without light sensors and backlight
[ 5.262042] applesmc: - Model with 10 temperature sensors
[ 5.262759] applesmc: device has already been initialized (0xe0, 0x00).
[ 5.262762] applesmc: device successfully initialized.
[ 5.263374] applesmc: 1 fans found.
[ 5.265236] input: applesmc as /devices/platform/applesmc.768/input/input10
[ 5.265565] applesmc: driver successfully loaded.
[ 5.301742] Bluetooth: Core ver 2.15
[ 5.301873] NET: Registered protocol family 31
[ 5.301939] Bluetooth: HCI device and connection manager initialized
[ 5.302007] Bluetooth: HCI socket layer initialized
[ 5.345517] cfg80211: Using static regulatory domain info
[ 5.345587] cfg80211: Regulatory domain: US
[ 5.345654] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 5.345740] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 5.345812] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 5.345885] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 5.345956] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 5.346028] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 5.346099] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 5.346177] cfg80211: Calling CRDA for country: US
[ 5.350043] Error: Driver 'pcspkr' is already registered, aborting...
[ 5.407242] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 5.407556] usbcore: registered new interface driver btusb
[ 5.545499] ath9k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 5.545584] ath9k 0000:02:00.0: setting latency timer to 64
[ 5.549374] alloc irq_desc for 22 on node -1
[ 5.549377] alloc kstat_irqs on node -1
[ 5.549386] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 5.549510] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 5.632499] hda_codec: STAC922x, Apple subsys_id=106b2200
[ 5.641709] input: HDA Intel Line In at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[ 5.641978] input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[ 5.642230] input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[ 5.642806] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.642891] i915 0000:00:02.0: setting latency timer to 64
[ 5.655241] [drm] set up 15M of stolen space
[ 5.676852] ath: EEPROM regdomain: 0x37
[ 5.676854] ath: EEPROM indicates we should expect a direct regpair map
[ 5.676858] ath: Country alpha2 being used: AT
[ 5.676860] ath: Regpair used: 0x37
[ 5.712826] phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 5.713603] Registered led device: ath9k-phy0::radio
[ 5.713691] Registered led device: ath9k-phy0::assoc
[ 5.713778] Registered led device: ath9k-phy0::tx
[ 5.713863] Registered led device: ath9k-phy0::rx
[ 5.713947] phy0: Atheros AR5418 MAC/BB Rev:2 AR5133 RF Rev:81: mem=0xffffc90005380000, irq=17
[ 5.714319] cfg80211: Calling CRDA for country: AT
[ 5.725713] udev: renamed network interface wlan0 to ath0
[ 6.087800] [drm] initialized overlay support
[ 6.087901] render error detected, EIR: 0x00000010
[ 6.087998] page table error
[ 6.088084] PGTBL_ER: 0x00000102
[ 6.088175] [drm:i915_handle_error] *ERROR* EIR stuck: 0x00000010, masking
[ 6.088287] render error detected, EIR: 0x00000010
[ 6.088383] page table error
[ 6.088469] PGTBL_ER: 0x00000102
[ 7.051816] Console: switching to colour frame buffer device 160x50
[ 7.055415] fb0: inteldrmfb frame buffer device
[ 7.055443] registered panic notifier
[ 7.055473] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 7.732527] Adding 976552k swap on /dev/sda3. Priority:-1 extents:1 across:976552k
[ 7.931177] loop: module loaded
[ 9.738528] REISERFS (device sda5): found reiserfs format "3.6" with standard journal
[ 9.738626] REISERFS (device sda5): using ordered data mode
[ 9.750926] REISERFS (device sda5): journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 9.753689] REISERFS (device sda5): checking transaction log (sda5)
[ 9.815256] REISERFS (device sda5): Using r5 hash to sort names
[ 11.117700] fuse init (API version 7.13)
[ 12.804172] lp: driver loaded but no devices found
[ 12.861039] ppdev: user-space parallel port driver
[ 15.675012] Bluetooth: L2CAP ver 2.14
[ 15.676584] Bluetooth: L2CAP socket layer initialized
[ 16.025689] Bluetooth: RFCOMM TTY layer initialized
[ 16.027275] Bluetooth: RFCOMM socket layer initialized
[ 16.028780] Bluetooth: RFCOMM ver 1.11
[ 16.117816] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 16.119283] Bluetooth: BNEP filters: protocol multicast
[ 16.308478] Bluetooth: SCO (Voice Link) ver 0.6
[ 16.309938] Bluetooth: SCO socket layer initialized
[ 19.089098] ADDRCONF(NETDEV_UP): ath0: link is not ready
[ 24.169218] sky2 eth0: enabling interface
[ 24.169579] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 29.095992] ADDRCONF(NETDEV_UP): ath0: link is not ready
[ 29.216113] sky2 eth0: disabling interface
[ 29.222134] sky2 eth0: enabling interface
[ 29.222490] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 29.320025] ADDRCONF(NETDEV_UP): ath0: link is not ready
[ 33.899936] ath9k: Two wiphys trying to scan at the same time
[ 34.084726] ath0: direct probe to AP 00:04:ed:a7:8f:86 (try 1)
[ 34.086724] ath0: direct probe responded
[ 34.086729] ath0: authenticate with AP 00:04:ed:a7:8f:86 (try 1)
[ 34.088379] ath0: authenticated
[ 34.088395] ath0: associate with AP 00:04:ed:a7:8f:86 (try 1)
[ 34.101260] ath0: RX AssocResp from 00:04:ed:a7:8f:86 (capab=0x411 status=0 aid=1)
[ 34.101266] ath0: associated
[ 34.105595] ADDRCONF(NETDEV_CHANGE): ath0: link becomes ready
[ 34.105670] cfg80211: Calling CRDA for country: IT
[ 34.617872] padlock: VIA PadLock not detected.
[ 44.808028] ath0: no IPv6 routers present
** Model information
sys_vendor: Apple Inc.
product_name: MacBook2,1
product_version: 1.0
chassis_vendor: Apple Inc.
chassis_version: Mac-F4208CAA
bios_vendor: Apple Inc.
bios_version: MB21.88Z.00A5.B07.0706270922
board_vendor: Apple Inc.
board_name: Mac-F4208CAA
board_version: PVT
** Loaded modules:
Module Size Used by
aes_x86_64 7340 1
aes_generic 25714 1 aes_x86_64
sco 7209 2
bnep 9427 2
rfcomm 29597 10
l2cap 24736 16 bnep,rfcomm
crc16 1319 1 l2cap
parport_pc 18855 0
ppdev 5030 0
lp 7462 0
parport 27954 3 parport_pc,ppdev,lp
fuse 50206 1
nls_utf8 1208 1
hfsplus 65270 1
firewire_sbp2 11514 0
loop 11799 0
arc4 1274 2
ecb 1841 2
snd_hda_codec_idt 42465 1
i915 254919 3
drm_kms_helper 20065 1 i915
snd_hda_intel 19987 2
ath9k 249912 0
mac80211 136956 1 ath9k
snd_hda_codec 54244 2 snd_hda_codec_idt,snd_hda_intel
ath 8006 1 ath9k
btusb 9817 2
snd_hwdep 5380 1 snd_hda_codec
cfg80211 101464 3 ath9k,mac80211,ath
bluetooth 41827 9 sco,bnep,rfcomm,l2cap,btusb
rfkill 13044 3 cfg80211,bluetooth
applesmc 20986 0
snd_pcsp 6579 4
snd_pcm 60471 4 snd_hda_intel,snd_hda_codec,snd_pcsp
joydev 8411 0
input_polldev 1967 1 applesmc
i2c_i801 7830 0
drm 142551 3 i915,drm_kms_helper
i2c_algo_bit 4225 1 i915
evdev 7352 24
uvcvideo 51887 0
video 17445 1 i915
videodev 29993 1 uvcvideo
v4l1_compat 11442 2 uvcvideo,videodev
v4l2_compat_ioctl32 8538 1 videodev
snd_timer 15582 2 snd_pcm
i2c_core 15712 6 i915,drm_kms_helper,i2c_i801,drm,i2c_algo_bit,videodev
hid_apple 4290 0
snd 46446 17 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcsp,snd_pcm,snd_timer
soundcore 4598 1 snd
usbhid 33276 1
mbp_nvidia_bl 1779 0
appletouch 7733 0
output 1692 1 video
rng_core 3006 0
snd_page_alloc 6249 2 snd_hda_intel,snd_pcm
hid 62857 2 hid_apple,usbhid
led_class 2433 2 ath9k,applesmc
battery 4998 0
ac 2192 0
processor 30303 2
button 4650 1 i915
reiserfs 194156 2
sg 18744 0
sr_mod 12602 0
sd_mod 29777 5
cdrom 29415 1 sr_mod
crc_t10dif 1276 1 sd_mod
ata_generic 2983 0
ata_piix 21124 4
firewire_ohci 19468 0
firewire_core 36800 2 firewire_sbp2,firewire_ohci
uhci_hcd 18521 0
thermal 11674 0
thermal_sys 11942 3 video,processor,thermal
libata 133584 2 ata_generic,ata_piix
crc_itu_t 1307 1 firewire_core
scsi_mod 122117 5 firewire_sbp2,sg,sr_mod,sd_mod,libata
ehci_hcd 31135 0
sky2 39278 0
usbcore 121938 8 btusb,uvcvideo,usbhid,appletouch,uhci_hcd,ehci_hcd
nls_base 6377 3 nls_utf8,hfsplus,usbcore
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
#allow-hotplug eth0
#iface eth0 inet dhcp
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
link/ether 00:1b:63:34:d9:b5 brd ff:ff:ff:ff:ff:ff
3: ath0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether 00:1c:b3:c3:42:44 brd ff:ff:ff:ff:ff:ff
inet 10.0.0.50/16 brd 10.0.255.255 scope global ath0
inet6 fe80::21c:b3ff:fec3:4244/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 3612 70 0 0 0 0 0 0 3612 70 0 0 0 0 0 0
eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
ath0: 2435818 6179 0 0 0 0 0 0 5741322 9280 0 0 0 0 0 0
*** Protocol statistics:
Ip:
6227 total packets received
0 forwarded
0 incoming packets discarded
6210 incoming packets delivered
9321 requests sent out
3 dropped because of missing route
Icmp:
20 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 19
echo replies: 1
3 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 2
echo request: 1
IcmpMsg:
InType0: 1
InType3: 19
OutType3: 2
OutType8: 1
Tcp:
684 active connections openings
0 passive connection openings
121 failed connection attempts
6 connection resets received
76 connections established
6004 segments received
8521 segments send out
613 segments retransmited
0 bad segments received.
327 resets sent
Udp:
160 packets received
2 packets to unknown port received.
0 packet receive errors
188 packets sent
UdpLite:
TcpExt:
29 TCP sockets finished time wait in fast timer
2 time wait sockets recycled by time stamp
1 packets rejects in established connections because of timestamp
197 delayed acks sent
Quick ack mode was activated 21 times
1192 packet headers predicted
1320 acknowledgments not containing data payload received
1632 predicted acknowledgments
10 times recovered from packet loss by selective acknowledgements
46 congestion windows recovered without slow start after partial ack
7 TCP data loss events
8 timeouts after SACK recovery
2 timeouts in loss state
17 fast retransmits
4 retransmits in slow start
314 other TCP timeouts
1 SACK retransmits failed
28 DSACKs sent for old packets
16 DSACKs received
70 connections reset due to unexpected data
4 connections reset due to early user close
1 connections aborted due to timeout
TCPDSACKIgnoredOld: 14
TCPSackShiftFallback: 57
IpExt:
OutMcastPkts: 21
InBcastPkts: 35
InOctets: 2351648
OutOctets: 5428054
OutMcastOctets: 1596
InBcastOctets: 4689
*** Device features:
ath0: 0x2000
eth0: 0x109a3
lo: 0x13865
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03) (prog-if 00 [VGA controller])
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at 90380000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at 20e0 [size=8]
Region 2: Memory at 80000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at 90400000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at 90300000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:07.0 Performance counters [1101]: Intel Corporation Device [8086:27a3] (rev 03)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 90444000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02)
Subsystem: SigmaTel Device [8384:7680]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at 90440000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 90200000-902fffff
Prefetchable memory behind bridge: 0000000090500000-00000000906fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: 90100000-901fffff
Prefetchable memory behind bridge: 0000000090700000-00000000908fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 4: I/O ports at 2080 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 2060 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 2040 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at 2020 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 0: Memory at 90445400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Memory behind bridge: 90000000-900fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02)
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 20b0 [size=16]
Kernel driver in use: ata_piix
00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 20c8 [size=8]
Region 1: I/O ports at 20ec [size=4]
Region 2: I/O ports at 20c0 [size=8]
Region 3: I/O ports at 20e8 [size=4]
Region 4: I/O ports at 20a0 [size=16]
Region 5: Memory at 90445000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02)
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at efa0 [size=32]
01:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller [11ab:4362] (rev 22)
Subsystem: Marvell Technology Group Ltd. Marvell RDK-8053 [11ab:5321]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 26
Region 0: Memory at 90200000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at 1000 [size=256]
Expansion ROM at 90500000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: sky2
02:00.0 Network controller [0280]: Atheros Communications Inc. AR5008 Wireless Network Adapter [168c:0024] (rev 01)
Subsystem: Apple Computer Inc. Device [106b:0087]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at 90100000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
03:03.0 FireWire (IEEE 1394) [0c00]: Agere Systems FW322/323 [11c1:5811] (rev 61) (prog-if 10 [OHCI])
Subsystem: Agere Systems FW322/323 [11c1:5811]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B+ DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 248 (3000ns min, 6000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at 90000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
** USB devices:
Bus 005 Device 003: ID 05ac:8205 Apple, Inc. Bluetooth HCI
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 05ac:8240 Apple, Inc. IR Receiver [built-in]
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 05ac:021b Apple, Inc. Internal Keyboard/Trackpad (ISO)
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 05ac:8501 Apple, Inc. Built-in iSight [Micron]
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (990, 'unstable'), (500, 'experimental'), (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores)
Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii debconf [debconf-2.0] 1.5.35 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.1 tools for generating an initramfs
ii linux-base 2.6.32-21 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-amd64 recommends:
ii firmware-linux-free 2.6.32-21 Binary firmware for various driver
Versions of packages linux-image-2.6.32-5-amd64 suggests:
ii grub-pc [grub] 1.96+20080724-16 GRand Unified Bootloader, version
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false
linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true
* linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/postinst/bootloader-test-error-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/postinst/bootloader-error-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/prerm/would-invalidate-boot-loader-2.6.32-5-amd64: true
linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64:
--- End Message ---