Bug#594350: Maybe it's just a hard disk problem. I just run sudo smartctl --all /dev/sda
smartctl 5.40 2010-07-12 r3124 [i686-pc-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Fujitsu MHV series
Device Model: FUJITSU MHV2060AT
Serial Number: NS12T5425FGT
Firmware Version: 00000096
User Capacity: 60,011,642,880 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: ATA/ATAPI-6 T13 1410D revision 3a
Local Time is: Wed Aug 25 18:23:49 2010 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 410) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 52) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 046 Pre-fail Always - 17877
2 Throughput_Performance 0x0005 100 100 030 Pre-fail Offline - 23724032
3 Spin_Up_Time 0x0003 100 100 025 Pre-fail Always - 1
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 152
5 Reallocated_Sector_Ct 0x0033 100 100 024 Pre-fail Always - 3 (1999, 1)
7 Seek_Error_Rate 0x000f 100 100 047 Pre-fail Always - 2120
8 Seek_Time_Performance 0x0005 100 100 019 Pre-fail Offline - 0
9 Power_On_Seconds 0x0032 064 064 000 Old_age Always - 18467h+05m+52s
10 Spin_Retry_Count 0x0013 100 100 020 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 150
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 62
193 Load_Cycle_Count 0x0032 071 071 000 Old_age Always - 594291
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 36 (Lifetime Min/Max 17/40)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 12
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 3 (1, 7024)
197 Current_Pending_Sector 0x0012 099 099 000 Old_age Always - 2
198 Offline_Uncorrectable 0x0010 098 098 000 Old_age Offline - 5
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x000f 100 100 060 Pre-fail Always - 448
203 Run_Out_Cancel 0x0002 100 100 000 Old_age Always - 1533276520374
SMART Error Log Version: 1
ATA Error Count: 300 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 300 occurred at disk power-on lifetime: 18466 hours (769 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 59 05 9b 63 ec e0 Error: UNC 5 sectors at LBA = 0x00ec639b = 15491995
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 98 63 ec e0 08 8d+22:56:56.208 READ DMA
f8 00 00 00 00 00 e0 08 8d+22:56:56.208 READ NATIVE MAX ADDRESS
ec 00 00 00 00 00 a0 0a 8d+22:56:56.200 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 0a 8d+22:56:56.192 SET FEATURES [Set transfer mode]
f8 00 00 00 00 00 e0 08 8d+22:56:56.192 READ NATIVE MAX ADDRESS
Error 299 occurred at disk power-on lifetime: 18466 hours (769 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 59 05 9b 63 ec e0 Error: UNC 5 sectors at LBA = 0x00ec639b = 15491995
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 98 63 ec e0 08 8d+22:56:50.937 READ DMA
f8 00 00 00 00 00 e0 08 8d+22:56:50.937 READ NATIVE MAX ADDRESS
ec 00 00 00 00 00 a0 0a 8d+22:56:50.928 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 0a 8d+22:56:50.921 SET FEATURES [Set transfer mode]
f8 00 00 00 00 00 e0 08 8d+22:56:50.921 READ NATIVE MAX ADDRESS
Error 298 occurred at disk power-on lifetime: 18466 hours (769 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 59 05 9b 63 ec e0 Error: UNC 5 sectors at LBA = 0x00ec639b = 15491995
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 98 63 ec e0 08 8d+22:56:45.662 READ DMA
f8 00 00 00 00 00 e0 08 8d+22:56:45.661 READ NATIVE MAX ADDRESS
ec 00 00 00 00 00 a0 0a 8d+22:56:45.653 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 0a 8d+22:56:45.646 SET FEATURES [Set transfer mode]
f8 00 00 00 00 00 e0 08 8d+22:56:45.646 READ NATIVE MAX ADDRESS
Error 297 occurred at disk power-on lifetime: 18466 hours (769 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 59 05 9b 63 ec e0 Error: UNC 5 sectors at LBA = 0x00ec639b = 15491995
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 98 63 ec e0 08 8d+22:56:40.391 READ DMA
f8 00 00 00 00 00 e0 08 8d+22:56:40.390 READ NATIVE MAX ADDRESS
ec 00 00 00 00 00 a0 0a 8d+22:56:40.382 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 0a 8d+22:56:40.375 SET FEATURES [Set transfer mode]
f8 00 00 00 00 00 e0 08 8d+22:56:40.374 READ NATIVE MAX ADDRESS
Error 296 occurred at disk power-on lifetime: 18466 hours (769 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 59 05 9b 63 ec e0 Error: UNC 5 sectors at LBA = 0x00ec639b = 15491995
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 98 63 ec e0 08 8d+22:56:35.107 READ DMA
f8 00 00 00 00 00 e0 08 8d+22:56:35.107 READ NATIVE MAX ADDRESS
ec 00 00 00 00 00 a0 0a 8d+22:56:35.099 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 0a 8d+22:56:35.091 SET FEATURES [Set transfer mode]
f8 00 00 00 00 00 e0 08 8d+22:56:35.091 READ NATIVE MAX ADDRESS
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 90% 18467 15491995
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Reply to: