Bug#594350: Sense: Unrecovered read error - auto reallocate failed, failed command: READ DMA
Package: linux-2.6
Version: 2.6.32-18
Severity: important
After a while, kernel starts printing errors and finally it
kills process that access frequently to hard disk.
-- Package-specific info:
** Version:
Linux version 2.6.32-5-486 (Debian 2.6.32-18) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-2) ) #1 Sat Jul 24 01:48:25 UTC 2010
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-486 root=UUID=c62b272b-7ccf-43d1-af53-42728c26067a ro noquiet
** Not tainted
** Kernel log:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-486 (Debian 2.6.32-18) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-2) ) #1 Sat Jul 24 01:48:25 UTC 2010
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001eff0000 (usable)
[ 0.000000] BIOS-e820: 000000001eff0000 - 000000001eff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001eff3000 - 000000001f000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.2 present.
[ 0.000000] last_pfn = 0x1eff0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CDFFF write-protect
[ 0.000000] CE000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 base 01F000000 mask FFF000000 uncachable
[ 0.000000] 2 base 0C0000000 mask FF0000000 write-combining
[ 0.000000] 3 base 0D0000000 mask FFF800000 write-combining
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-000000001eff0000
[ 0.000000] 0000000000 - 001eff0000 page 4k
[ 0.000000] kernel direct mapping tables up to 1eff0000 @ 7000-86000
[ 0.000000] RAMDISK: 16c25000 - 17433b30
[ 0.000000] ACPI: RSDP 000f6570 00014 (v00 VT9174)
[ 0.000000] ACPI: RSDT 1eff3000 00028 (v01 VT9174 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 1eff3040 00074 (v01 VT9174 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 1eff30c0 031AC (v01 VT9174 AWRDACPI 00001000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 1eff0000 00040
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 495MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1eff0000
[ 0.000000] low ram: 0 - 1eff0000
[ 0.000000] node 0 low ram: 00000000 - 1eff0000
[ 0.000000] node 0 bootmap 00001000 - 00004e00
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 001eff0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0001000000 - 000144fa00] TEXT DATA BSS ==> [0001000000 - 000144fa00]
[ 0.000000] #2 [0016c25000 - 0017433b30] RAMDISK ==> [0016c25000 - 0017433b30]
[ 0.000000] #3 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
[ 0.000000] #4 [0001450000 - 000145608e] BRK ==> [0001450000 - 000145608e]
[ 0.000000] #5 [0000007000 - 000007d000] PGTABLE ==> [0000007000 - 000007d000]
[ 0.000000] #6 [0000001000 - 0000005000] BOOTMAP ==> [0000001000 - 0000005000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0001eff0
[ 0.000000] HighMem 0x0001eff0 -> 0x0001eff0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x000000a0
[ 0.000000] 0: 0x00000100 -> 0x0001eff0
[ 0.000000] On node 0 totalpages: 126864
[ 0.000000] free_area_init_node: node 0, pgdat c135ea54, node_mem_map c1458000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3968 pages, LIFO batch:0
[ 0.000000] Normal zone: 960 pages used for memmap
[ 0.000000] Normal zone: 121904 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] No local APIC present or hardware disabled
[ 0.000000] APIC: disable apic facility
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 1f000000 (gap: 1f000000:e0ff0000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125872
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-486 root=UUID=c62b272b-7ccf-43d1-af53-42728c26067a ro noquiet
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 489744k/507840k available (2332k kernel code, 17560k reserved, 1145k data, 440k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfffa2000 - 0xfffff000 ( 372 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xdf7f0000 - 0xff7fe000 ( 512 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdeff0000 ( 495 MB)
[ 0.000000] .init : 0xc1366000 - 0xc13d4000 ( 440 kB)
[ 0.000000] .data : 0xc124735b - 0xc1365a80 (1145 kB)
[ 0.000000] .text : 0xc1000000 - 0xc124735b (2332 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:288
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 599.901 MHz processor.
[ 0.004011] Calibrating delay loop (skipped), value calculated using timer frequency.. 1199.80 BogoMIPS (lpj=2399604)
[ 0.004192] Security Framework initialized
[ 0.004259] SELinux: Disabled at boot.
[ 0.004328] Mount-cache hash table entries: 512
[ 0.004935] Initializing cgroup subsys ns
[ 0.004995] Initializing cgroup subsys cpuacct
[ 0.005052] Initializing cgroup subsys devices
[ 0.005110] Initializing cgroup subsys freezer
[ 0.005166] Initializing cgroup subsys net_cls
[ 0.005290] CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
[ 0.005358] CPU: L2 Cache: 64K (32 bytes/line)
[ 0.005459] CPU: Centaur VIA Samuel 2 stepping 03
[ 0.005598] Checking 'hlt' instruction... OK.
[ 0.024614] ACPI: Core revision 20090903
[ 0.038136] ACPI: setting ELCR to 0200 (from 1220)
[ 0.041392] devtmpfs: initialized
[ 0.043339] regulator: core version 0.5
[ 0.043681] NET: Registered protocol family 16
[ 0.044235] EISA bus registered
[ 0.044309] ACPI: bus type pci registered
[ 0.063827] PCI: PCI BIOS revision 2.10 entry at 0xfb2d0, last bus=3
[ 0.063889] PCI: Using configuration type 1 for base access
[ 0.066169] bio: create slab <bio-0> at 0
[ 0.068373] ACPI: EC: Look up EC in DSDT
[ 0.088271] ACPI: Interpreter enabled
[ 0.088360] ACPI: (supports S0 S1 S4 S5)
[ 0.088623] ACPI: Using PIC for interrupt routing
[ 0.107723] ACPI: No dock devices found.
[ 0.108556] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.108795] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xc0000000-0xcfffffff]
[ 0.108972] pci 0000:00:01.0: supports D1
[ 0.109065] pci 0000:00:0a.0: reg 10 32bit mmio: [0xd6000000-0xd6000fff]
[ 0.109109] pci 0000:00:0a.0: supports D1 D2
[ 0.109127] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.109195] pci 0000:00:0a.0: PME# disabled
[ 0.109316] pci 0000:00:0a.1: reg 10 32bit mmio: [0xd6005000-0xd6005fff]
[ 0.109360] pci 0000:00:0a.1: supports D1 D2
[ 0.109378] pci 0000:00:0a.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.109444] pci 0000:00:0a.1: PME# disabled
[ 0.109580] pci 0000:00:0d.0: reg 10 32bit mmio: [0xd600a000-0xd600a7ff]
[ 0.109609] pci 0000:00:0d.0: reg 14 io port: [0xb000-0xb07f]
[ 0.109680] pci 0000:00:0d.0: supports D2
[ 0.109697] pci 0000:00:0d.0: PME# supported from D2 D3hot D3cold
[ 0.109761] pci 0000:00:0d.0: PME# disabled
[ 0.109905] pci 0000:00:10.0: reg 20 io port: [0xb400-0xb41f]
[ 0.109958] pci 0000:00:10.0: supports D1 D2
[ 0.109976] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.110042] pci 0000:00:10.0: PME# disabled
[ 0.110181] pci 0000:00:10.1: reg 20 io port: [0xb800-0xb81f]
[ 0.110234] pci 0000:00:10.1: supports D1 D2
[ 0.110253] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.110319] pci 0000:00:10.1: PME# disabled
[ 0.110468] pci 0000:00:10.2: reg 20 io port: [0xbc00-0xbc1f]
[ 0.110521] pci 0000:00:10.2: supports D1 D2
[ 0.110539] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.110605] pci 0000:00:10.2: PME# disabled
[ 0.110725] pci 0000:00:10.3: reg 10 32bit mmio: [0xd600b000-0xd600b0ff]
[ 0.110799] pci 0000:00:10.3: supports D1 D2
[ 0.110818] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.110883] pci 0000:00:10.3: PME# disabled
[ 0.111038] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.111117] pci 0000:00:11.0: quirk: region 0400-047f claimed by vt8235 PM
[ 0.111190] pci 0000:00:11.0: quirk: region 0500-050f claimed by vt8235 SMB
[ 0.111361] pci 0000:00:11.1: reg 20 io port: [0xc000-0xc00f]
[ 0.111488] pci 0000:00:11.5: reg 10 io port: [0xc400-0xc4ff]
[ 0.111564] pci 0000:00:11.5: supports D1 D2
[ 0.111646] pci 0000:00:12.0: reg 10 io port: [0xcc00-0xccff]
[ 0.111675] pci 0000:00:12.0: reg 14 32bit mmio: [0xd600c000-0xd600c0ff]
[ 0.111746] pci 0000:00:12.0: supports D1 D2
[ 0.111764] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.111830] pci 0000:00:12.0: PME# disabled
[ 0.112028] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xd0000000-0xd3ffffff]
[ 0.112058] pci 0000:01:00.0: reg 14 32bit mmio: [0xd4000000-0xd4ffffff]
[ 0.112103] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[ 0.112148] pci 0000:01:00.0: supports D1 D2
[ 0.112231] pci 0000:00:01.0: bridge 32bit mmio: [0xd4000000-0xd5ffffff]
[ 0.112258] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd0000000-0xd3ffffff]
[ 0.112352] pci_bus 0000:00: on NUMA node 0
[ 0.112381] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.206496] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 4 5 6 7 *12)
[ 0.207574] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 4 5 6 7 12) *9
[ 0.208713] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 4 *5 6 7 12)
[ 0.209800] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 4 5 6 7 *12)
[ 0.210599] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.210680] vgaarb: loaded
[ 0.211067] PCI: Using ACPI for IRQ routing
[ 0.211835] Switching to clocksource tsc
[ 0.213780] pnp: PnP ACPI init
[ 0.213888] ACPI: bus type pnp registered
[ 0.227679] pnp: PnP ACPI: found 13 devices
[ 0.227743] ACPI: ACPI bus type pnp unregistered
[ 0.227805] PnPBIOS: Disabled by ACPI PNP
[ 0.227902] system 00:00: iomem range 0xd0000-0xd3fff has been reserved
[ 0.227977] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.228052] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.228160] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 0.228237] system 00:00: iomem range 0x1eff0000-0x1effffff could not be reserved
[ 0.228322] system 00:00: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.228398] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.228473] system 00:00: iomem range 0x100000-0x1efeffff could not be reserved
[ 0.228556] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.228633] system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved
[ 0.228728] system 00:02: ioport range 0x400-0x47f has been reserved
[ 0.228800] system 00:02: ioport range 0x500-0x50f has been reserved
[ 0.228890] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
[ 0.264664] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.264733] pci 0000:00:01.0: IO window: disabled
[ 0.264798] pci 0000:00:01.0: MEM window: 0xd4000000-0xd5ffffff
[ 0.264869] pci 0000:00:01.0: PREFETCH window: 0xd0000000-0xd3ffffff
[ 0.264943] pci 0000:00:0a.0: CardBus bridge, secondary bus 0000:02
[ 0.265010] pci 0000:00:0a.0: IO window: 0x001000-0x0010ff
[ 0.265077] pci 0000:00:0a.0: IO window: 0x001400-0x0014ff
[ 0.265146] pci 0000:00:0a.0: PREFETCH window: 0x20000000-0x23ffffff
[ 0.265218] pci 0000:00:0a.0: MEM window: 0x24000000-0x27ffffff
[ 0.265287] pci 0000:00:0a.1: CardBus bridge, secondary bus 0000:06
[ 0.265354] pci 0000:00:0a.1: IO window: 0x001800-0x0018ff
[ 0.265421] pci 0000:00:0a.1: IO window: 0x001c00-0x001cff
[ 0.265490] pci 0000:00:0a.1: PREFETCH window: 0x28000000-0x2bffffff
[ 0.265562] pci 0000:00:0a.1: MEM window: 0x2c000000-0x2fffffff
[ 0.265647] pci 0000:00:01.0: setting latency timer to 64
[ 0.265882] pci 0000:00:0a.0: power state changed by ACPI to D0
[ 0.266091] pci 0000:00:0a.0: power state changed by ACPI to D0
[ 0.268011] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 12
[ 0.268074] PCI: setting IRQ 12 as level-triggered
[ 0.268102] pci 0000:00:0a.0: PCI INT A -> Link[LNKA] -> GSI 12 (level, low) -> IRQ 12
[ 0.268360] pci 0000:00:0a.1: power state changed by ACPI to D0
[ 0.269267] pci 0000:00:0a.1: power state changed by ACPI to D0
[ 0.270710] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
[ 0.270771] PCI: setting IRQ 5 as level-triggered
[ 0.270796] pci 0000:00:0a.1: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 0.270883] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.270905] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.270931] pci_bus 0000:01: resource 1 mem: [0xd4000000-0xd5ffffff]
[ 0.270955] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xd3ffffff]
[ 0.270980] pci_bus 0000:02: resource 0 io: [0x1000-0x10ff]
[ 0.271002] pci_bus 0000:02: resource 1 io: [0x1400-0x14ff]
[ 0.271025] pci_bus 0000:02: resource 2 pref mem [0x20000000-0x23ffffff]
[ 0.271050] pci_bus 0000:02: resource 3 mem: [0x24000000-0x27ffffff]
[ 0.271074] pci_bus 0000:06: resource 0 io: [0x1800-0x18ff]
[ 0.271096] pci_bus 0000:06: resource 1 io: [0x1c00-0x1cff]
[ 0.271119] pci_bus 0000:06: resource 2 pref mem [0x28000000-0x2bffffff]
[ 0.271144] pci_bus 0000:06: resource 3 mem: [0x2c000000-0x2fffffff]
[ 0.271317] NET: Registered protocol family 2
[ 0.271820] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.273575] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.274613] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.275239] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.275306] TCP reno registered
[ 0.275708] NET: Registered protocol family 1
[ 0.275832] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 0.276070] pci 0000:01:00.0: Boot video device
[ 0.276329] Unpacking initramfs...
[ 1.981705] Freeing initrd memory: 8250k freed
[ 2.055637] audit: initializing netlink socket (disabled)
[ 2.055739] type=2000 audit(1282644733.052:1): initialized
[ 2.076462] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 2.087476] VFS: Disk quotas dquot_6.5.2
[ 2.087972] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.088522] msgmni has been set to 972
[ 2.089632] alg: No test for stdrng (krng)
[ 2.089839] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 2.089913] io scheduler noop registered
[ 2.089968] io scheduler anticipatory registered
[ 2.090025] io scheduler deadline registered
[ 2.090348] io scheduler cfq registered (default)
[ 2.091205] isapnp: Scanning for PnP cards...
[ 2.445297] isapnp: No Plug & Play device found
[ 2.453478] Linux agpgart interface v0.103
[ 2.454231] agpgart: Detected VIA CLE266 chipset
[ 2.471665] agpgart-via 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 2.471834] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.472136] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.472424] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.473699] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.474139] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.475020] PNP: No PS/2 controller found. Probing ports directly.
[ 2.724130] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.724652] mice: PS/2 mouse device common for all mice
[ 2.724909] rtc_cmos 00:05: RTC can wake from S4
[ 2.725209] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 2.725307] rtc0: alarms up to one year, y3k, 242 bytes nvram
[ 2.725565] EISA: Probing bus 0 at eisa.0
[ 2.725631] Cannot allocate resource for EISA slot 1
[ 2.725769] EISA: Detected 0 cards.
[ 2.725822] cpuidle: using governor ladder
[ 2.725876] cpuidle: using governor menu
[ 2.725938] No iBFT detected.
[ 2.728655] TCP cubic registered
[ 2.729692] NET: Registered protocol family 10
[ 2.732526] lo: Disabled Privacy Extensions
[ 2.734595] Mobile IPv6
[ 2.734645] NET: Registered protocol family 17
[ 2.734713] Using IPI Shortcut mode
[ 2.735194] PM: Resume from disk failed.
[ 2.735242] registered taskstats version 1
[ 2.736271] rtc_cmos 00:05: setting system clock to 2010-08-24 10:12:14 UTC (1282644734)
[ 2.736471] Initalizing network drop monitor service
[ 2.736687] Freeing unused kernel memory: 440k freed
[ 2.740683] Write protecting the kernel text: 2336k
[ 2.740863] Write protecting the kernel read-only data: 892k
[ 2.844297] udev: starting version 160
[ 4.003345] usbcore: registered new interface driver usbfs
[ 4.004270] usbcore: registered new interface driver hub
[ 4.005205] usbcore: registered new device driver usb
[ 4.031595] SCSI subsystem initialized
[ 4.081430] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.083575] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 12
[ 4.083652] ehci_hcd 0000:00:10.3: PCI INT D -> Link[LNKD] -> GSI 12 (level, low) -> IRQ 12
[ 4.083775] ehci_hcd 0000:00:10.3: EHCI Host Controller
[ 4.083949] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
[ 4.084288] ehci_hcd 0000:00:10.3: irq 12, io mem 0xd600b000
[ 4.107940] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00
[ 4.109358] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.109439] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.109514] usb usb1: Product: EHCI Host Controller
[ 4.109573] usb usb1: Manufacturer: Linux 2.6.32-5-486 ehci_hcd
[ 4.109637] usb usb1: SerialNumber: 0000:00:10.3
[ 4.110502] usb usb1: configuration #1 chosen from 1 choice
[ 4.110942] hub 1-0:1.0: USB hub found
[ 4.111054] hub 1-0:1.0: 6 ports detected
[ 4.152353] Floppy drive(s): fd0 is 1.44M
[ 4.156137] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.156442] uhci_hcd 0000:00:10.0: PCI INT A -> Link[LNKA] -> GSI 12 (level, low) -> IRQ 12
[ 4.156542] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 4.156649] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 4.156779] uhci_hcd 0000:00:10.0: irq 12, io base 0x0000b400
[ 4.157131] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.157203] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.157279] usb usb2: Product: UHCI Host Controller
[ 4.157338] usb usb2: Manufacturer: Linux 2.6.32-5-486 uhci_hcd
[ 4.157400] usb usb2: SerialNumber: 0000:00:10.0
[ 4.169025] usb usb2: configuration #1 chosen from 1 choice
[ 4.169610] hub 2-0:1.0: USB hub found
[ 4.169728] hub 2-0:1.0: 2 ports detected
[ 4.170060] uhci_hcd 0000:00:10.1: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 4.170143] uhci_hcd 0000:00:10.1: VIA VLink IRQ fixup, from 9 to 5
[ 4.170243] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 4.170334] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 4.170461] uhci_hcd 0000:00:10.1: irq 5, io base 0x0000b800
[ 4.170798] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.170870] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.170946] usb usb3: Product: UHCI Host Controller
[ 4.171004] usb usb3: Manufacturer: Linux 2.6.32-5-486 uhci_hcd
[ 4.171066] usb usb3: SerialNumber: 0000:00:10.1
[ 4.172509] FDC 0 is a post-1991 82077
[ 4.176959] usb usb3: configuration #1 chosen from 1 choice
[ 4.177480] hub 3-0:1.0: USB hub found
[ 4.177589] hub 3-0:1.0: 2 ports detected
[ 4.179492] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
[ 4.179570] uhci_hcd 0000:00:10.2: PCI INT C -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5
[ 4.179665] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 4.179780] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 4.179907] uhci_hcd 0000:00:10.2: irq 5, io base 0x0000bc00
[ 4.184348] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.184430] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.184507] usb usb4: Product: UHCI Host Controller
[ 4.184565] usb usb4: Manufacturer: Linux 2.6.32-5-486 uhci_hcd
[ 4.184627] usb usb4: SerialNumber: 0000:00:10.2
[ 4.185498] usb usb4: configuration #1 chosen from 1 choice
[ 4.185937] hub 4-0:1.0: USB hub found
[ 4.186070] hub 4-0:1.0: 2 ports detected
[ 4.420618] libata version 3.00 loaded.
[ 4.476172] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 4.476261] via-rhine: Broken BIOS detected, avoid_D3 enabled.
[ 4.476458] via-rhine 0000:00:12.0: PCI INT A -> Link[LNKA] -> GSI 12 (level, low) -> IRQ 12
[ 4.509338] eth0: VIA Rhine II at 0x1cc00, 00:40:63:d5:1b:cd, IRQ 12.
[ 4.510132] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
[ 4.531925] pata_via 0000:00:11.1: version 0.3.4
[ 4.531989] pata_via 0000:00:11.1: PCI INT A -> Link[LNKA] -> GSI 12 (level, low) -> IRQ 12
[ 4.532148] pata_via 0000:00:11.1: VIA VLink IRQ fixup, from 255 to 12
[ 4.532797] scsi0 : pata_via
[ 4.533771] scsi1 : pata_via
[ 4.550091] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xc000 irq 14
[ 4.550176] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xc008 irq 15
[ 4.551860] firewire_ohci 0000:00:0d.0: PCI INT A -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 4.632055] firewire_ohci: Added fw-ohci device 0000:00:0d.0, OHCI version 1.0
[ 4.876656] ata2.00: ATA-6: FUJITSU MHV2060AT, 00000096, max UDMA/100
[ 4.876737] ata2.00: 117210240 sectors, multi 16: LBA
[ 4.876911] ata2.00: limited to UDMA/33 due to 40-wire cable
[ 4.892601] ata2.00: configured for UDMA/33
[ 4.893064] scsi 1:0:0:0: Direct-Access ATA FUJITSU MHV2060A 0000 PQ: 0 ANSI: 5
[ 4.970921] sd 1:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB)
[ 4.971215] sd 1:0:0:0: [sda] Write Protect is off
[ 4.971281] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.971383] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.972109] sda: sda1 sda2
[ 5.097186] sd 1:0:0:0: [sda] Attached SCSI disk
[ 5.132458] firewire_core: created device fw0: GUID 004063500000f505, S400
[ 6.043184] PM: Starting manual resume from disk
[ 6.043263] PM: Resume from partition 8:2
[ 6.043276] PM: Checking hibernation image.
[ 6.043746] PM: Error -22 checking image file
[ 6.043759] PM: Resume from disk failed.
[ 6.352373] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 8.407672] udev: starting version 160
[ 9.864274] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 10.050391] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 10.050500] ACPI: Power Button [PWRB]
[ 10.051180] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 10.051273] ACPI: Power Button [PWRF]
[ 10.083832] Marking TSC unstable due to TSC halts in idle
[ 10.110134] processor LNXCPU:00: registered as cooling_device0
[ 10.111194] Switching to clocksource acpi_pm
[ 10.192678] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 10.295806] parport_pc 00:0b: reported by Plug and Play ACPI
[ 10.295914] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 10.465651] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 10.486657] yenta_cardbus 0000:00:0a.0: CardBus bridge found [1106:aa01]
[ 10.609575] NET: Registered protocol family 23
[ 10.616708] yenta_cardbus 0000:00:0a.0: ISA IRQ mask 0x0c00, PCI irq 12
[ 10.616790] yenta_cardbus 0000:00:0a.0: Socket status: 30000820
[ 10.619307] yenta_cardbus 0000:00:0a.1: CardBus bridge found [1106:aa01]
[ 10.744846] yenta_cardbus 0000:00:0a.1: ISA IRQ mask 0x0c00, PCI irq 5
[ 10.744927] yenta_cardbus 0000:00:0a.1: Socket status: 30000006
[ 11.133534] Error: Driver 'pcspkr' is already registered, aborting...
[ 11.253170] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
[ 11.253343] pci 0000:02:00.0: reg 10 32bit mmio: [0x000000-0x001fff]
[ 11.253375] pci 0000:02:00.0: reg 14 32bit mmio: [0x000000-0x01ffff]
[ 11.253467] pci 0000:02:00.0: supports D1 D2
[ 11.253487] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot
[ 11.253554] pci 0000:02:00.0: PME# disabled
[ 11.305968] VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5
[ 11.306228] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[ 11.550527] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: clean.
[ 11.552830] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: clean.
[ 11.553598] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
[ 11.554589] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean.
[ 11.556719] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 11.558948] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[ 11.559708] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 11.560974] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 11.562564] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 11.564611] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
[ 13.016006] Adding 987128k swap on /dev/sda2. Priority:-1 extents:1 across:987128k
[ 13.794417] loop: module loaded
[ 15.517227] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 26.064046] eth0: no IPv6 routers present
[ 112.815934] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 112.816081] ata2.00: BMDMA stat 0x25
[ 112.816143] ata2.00: failed command: READ DMA
[ 112.816239] ata2.00: cmd c8/00:00:00:63:ec/00:00:00:00:00/e0 tag 0 dma 131072 in
[ 112.816253] res 51/40:65:9b:63:ec/00:00:00:00:00/e0 Emask 0x9 (media error)
[ 112.816391] ata2.00: status: { DRDY ERR }
[ 112.816448] ata2.00: error: { UNC }
[ 112.832658] ata2.00: configured for UDMA/33
[ 112.832754] ata2: EH complete
[ 118.224540] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 118.224617] ata2.00: BMDMA stat 0x25
[ 118.224679] ata2.00: failed command: READ DMA
[ 118.224773] ata2.00: cmd c8/00:00:00:63:ec/00:00:00:00:00/e0 tag 0 dma 131072 in
[ 118.224786] res 51/40:65:9b:63:ec/00:00:00:00:00/e0 Emask 0x9 (media error)
[ 118.224925] ata2.00: status: { DRDY ERR }
[ 118.224981] ata2.00: error: { UNC }
[ 118.248647] ata2.00: configured for UDMA/33
[ 118.248735] ata2: EH complete
[ 123.518980] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 123.519059] ata2.00: BMDMA stat 0x25
[ 123.519120] ata2.00: failed command: READ DMA
[ 123.519214] ata2.00: cmd c8/00:00:00:63:ec/00:00:00:00:00/e0 tag 0 dma 131072 in
[ 123.519228] res 51/40:65:9b:63:ec/00:00:00:00:00/e0 Emask 0x9 (media error)
[ 123.519366] ata2.00: status: { DRDY ERR }
[ 123.519422] ata2.00: error: { UNC }
[ 123.540633] ata2.00: configured for UDMA/33
[ 123.540718] ata2: EH complete
[ 128.813423] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 128.813501] ata2.00: BMDMA stat 0x25
[ 128.813563] ata2.00: failed command: READ DMA
[ 128.813657] ata2.00: cmd c8/00:00:00:63:ec/00:00:00:00:00/e0 tag 0 dma 131072 in
[ 128.813670] res 51/40:65:9b:63:ec/00:00:00:00:00/e0 Emask 0x9 (media error)
[ 128.813809] ata2.00: status: { DRDY ERR }
[ 128.813865] ata2.00: error: { UNC }
[ 128.836633] ata2.00: configured for UDMA/33
[ 128.836721] ata2: EH complete
[ 134.107854] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 134.107933] ata2.00: BMDMA stat 0x25
[ 134.107995] ata2.00: failed command: READ DMA
[ 134.108125] ata2.00: cmd c8/00:00:00:63:ec/00:00:00:00:00/e0 tag 0 dma 131072 in
[ 134.108138] res 51/40:65:9b:63:ec/00:00:00:00:00/e0 Emask 0x9 (media error)
[ 134.108277] ata2.00: status: { DRDY ERR }
[ 134.108333] ata2.00: error: { UNC }
[ 134.132633] ata2.00: configured for UDMA/33
[ 134.132720] ata2: EH complete
[ 139.402285] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 139.402363] ata2.00: BMDMA stat 0x25
[ 139.402425] ata2.00: failed command: READ DMA
[ 139.402519] ata2.00: cmd c8/00:00:00:63:ec/00:00:00:00:00/e0 tag 0 dma 131072 in
[ 139.402532] res 51/40:65:9b:63:ec/00:00:00:00:00/e0 Emask 0x9 (media error)
[ 139.402670] ata2.00: status: { DRDY ERR }
[ 139.402726] ata2.00: error: { UNC }
[ 139.424654] ata2.00: configured for UDMA/33
[ 139.424751] sd 1:0:0:0: [sda] Unhandled sense code
[ 139.424809] sd 1:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 139.424904] sd 1:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor]
[ 139.425071] Descriptor sense data with sense descriptors (in hex):
[ 139.425157] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 139.425645] 00 ec 63 9b
[ 139.425822] sd 1:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed
[ 139.425960] sd 1:0:0:0: [sda] CDB: Read(10): 28 00 00 ec 63 00 00 01 00 00
[ 139.426355] end_request: I/O error, dev sda, sector 15491995
[ 139.426480] ata2: EH complete
[ 145.024945] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 145.025025] ata2.00: BMDMA stat 0x25
[ 145.025087] ata2.00: failed command: READ DMA
[ 145.025950] ata2.00: cmd c8/00:08:98:63:ec/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 145.025963] res 51/40:05:9b:63:ec/00:00:00:00:00/e0 Emask 0x9 (media error)
[ 145.026101] ata2.00: status: { DRDY ERR }
[ 145.026158] ata2.00: error: { UNC }
[ 145.048649] ata2.00: configured for UDMA/33
[ 145.048740] ata2: EH complete
[ 150.319371] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 150.319450] ata2.00: BMDMA stat 0x25
[ 150.319511] ata2.00: failed command: READ DMA
[ 150.319606] ata2.00: cmd c8/00:08:98:63:ec/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 150.319619] res 51/40:05:9b:63:ec/00:00:00:00:00/e0 Emask 0x9 (media error)
[ 150.319757] ata2.00: status: { DRDY ERR }
[ 150.319813] ata2.00: error: { UNC }
[ 150.344635] ata2.00: configured for UDMA/33
[ 150.344722] ata2: EH complete
[ 155.613800] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 155.613879] ata2.00: BMDMA stat 0x25
[ 155.613940] ata2.00: failed command: READ DMA
[ 155.614035] ata2.00: cmd c8/00:08:98:63:ec/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 155.614048] res 51/40:05:9b:63:ec/00:00:00:00:00/e0 Emask 0x9 (media error)
[ 155.614186] ata2.00: status: { DRDY ERR }
[ 155.614241] ata2.00: error: { UNC }
[ 155.636662] ata2.00: configured for UDMA/33
[ 155.636748] ata2: EH complete
[ 160.908231] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 160.908309] ata2.00: BMDMA stat 0x25
[ 160.908370] ata2.00: failed command: READ DMA
[ 160.908465] ata2.00: cmd c8/00:08:98:63:ec/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 160.908478] res 51/40:05:9b:63:ec/00:00:00:00:00/e0 Emask 0x9 (media error)
[ 160.908616] ata2.00: status: { DRDY ERR }
[ 160.908672] ata2.00: error: { UNC }
[ 160.932633] ata2.00: configured for UDMA/33
[ 160.932719] ata2: EH complete
[ 166.202665] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 166.202745] ata2.00: BMDMA stat 0x25
[ 166.202806] ata2.00: failed command: READ DMA
[ 166.202901] ata2.00: cmd c8/00:08:98:63:ec/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 166.202914] res 51/40:05:9b:63:ec/00:00:00:00:00/e0 Emask 0x9 (media error)
[ 166.203051] ata2.00: status: { DRDY ERR }
[ 166.203107] ata2.00: error: { UNC }
[ 166.224633] ata2.00: configured for UDMA/33
[ 166.224718] ata2: EH complete
[ 171.611256] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 171.611336] ata2.00: BMDMA stat 0x25
[ 171.611397] ata2.00: failed command: READ DMA
[ 171.611492] ata2.00: cmd c8/00:08:98:63:ec/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 171.611505] res 51/40:05:9b:63:ec/00:00:00:00:00/e0 Emask 0x9 (media error)
[ 171.611643] ata2.00: status: { DRDY ERR }
[ 171.611699] ata2.00: error: { UNC }
[ 171.632633] ata2.00: configured for UDMA/33
[ 171.632727] sd 1:0:0:0: [sda] Unhandled sense code
[ 171.632785] sd 1:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 171.632881] sd 1:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor]
[ 171.633048] Descriptor sense data with sense descriptors (in hex):
[ 171.633134] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 171.633622] 00 ec 63 9b
[ 171.633798] sd 1:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed
[ 171.633936] sd 1:0:0:0: [sda] CDB: Read(10): 28 00 00 ec 63 98 00 00 08 00
[ 171.634331] end_request: I/O error, dev sda, sector 15491995
[ 171.634438] ata2: EH complete
[ 176.919963] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 176.920080] ata2.00: BMDMA stat 0x25
[ 176.920142] ata2.00: failed command: READ DMA
[ 176.920237] ata2.00: cmd c8/00:08:98:63:ec/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 176.920250] res 51/40:05:9b:63:ec/00:00:00:00:00/e0 Emask 0x9 (media error)
[ 176.920388] ata2.00: status: { DRDY ERR }
[ 176.920445] ata2.00: error: { UNC }
[ 176.984634] ata2.00: configured for UDMA/33
[ 176.984725] ata2: EH complete
[ 182.257209] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 182.257288] ata2.00: BMDMA stat 0x25
[ 182.257349] ata2.00: failed command: READ DMA
[ 182.257444] ata2.00: cmd c8/00:08:98:63:ec/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 182.257457] res 51/40:05:9b:63:ec/00:00:00:00:00/e0 Emask 0x9 (media error)
[ 182.257595] ata2.00: status: { DRDY ERR }
[ 182.257651] ata2.00: error: { UNC }
[ 182.280725] ata2.00: configured for UDMA/33
[ 182.280820] ata2: EH complete
[ 187.551649] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 187.551729] ata2.00: BMDMA stat 0x25
[ 187.551790] ata2.00: failed command: READ DMA
[ 187.551885] ata2.00: cmd c8/00:08:98:63:ec/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 187.551898] res 51/40:05:9b:63:ec/00:00:00:00:00/e0 Emask 0x9 (media error)
[ 187.552075] ata2.00: status: { DRDY ERR }
[ 187.552131] ata2.00: error: { UNC }
[ 187.576664] ata2.00: configured for UDMA/33
[ 187.576758] ata2: EH complete
[ 192.846078] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 192.846156] ata2.00: BMDMA stat 0x25
[ 192.846217] ata2.00: failed command: READ DMA
[ 192.846312] ata2.00: cmd c8/00:08:98:63:ec/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 192.846325] res 51/40:05:9b:63:ec/00:00:00:00:00/e0 Emask 0x9 (media error)
[ 192.846463] ata2.00: status: { DRDY ERR }
[ 192.846519] ata2.00: error: { UNC }
[ 192.868634] ata2.00: configured for UDMA/33
[ 192.868728] ata2: EH complete
[ 198.254679] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 198.254758] ata2.00: BMDMA stat 0x25
[ 198.254820] ata2.00: failed command: READ DMA
[ 198.254914] ata2.00: cmd c8/00:08:98:63:ec/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 198.254927] res 51/40:05:9b:63:ec/00:00:00:00:00/e0 Emask 0x9 (media error)
[ 198.255066] ata2.00: status: { DRDY ERR }
[ 198.255122] ata2.00: error: { UNC }
[ 198.276634] ata2.00: configured for UDMA/33
[ 198.276724] ata2: EH complete
[ 203.549121] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 203.549201] ata2.00: BMDMA stat 0x25
[ 203.549262] ata2.00: failed command: READ DMA
[ 203.549357] ata2.00: cmd c8/00:08:98:63:ec/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 203.549370] res 51/40:05:9b:63:ec/00:00:00:00:00/e0 Emask 0x9 (media error)
[ 203.549507] ata2.00: status: { DRDY ERR }
[ 203.549564] ata2.00: error: { UNC }
[ 203.572645] ata2.00: configured for UDMA/33
[ 203.572746] sd 1:0:0:0: [sda] Unhandled sense code
[ 203.572804] sd 1:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 203.572899] sd 1:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor]
[ 203.573066] Descriptor sense data with sense descriptors (in hex):
[ 203.573152] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 203.573678] 00 ec 63 9b
[ 203.573855] sd 1:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed
[ 203.573993] sd 1:0:0:0: [sda] CDB: Read(10): 28 00 00 ec 63 98 00 00 08 00
[ 203.574387] end_request: I/O error, dev sda, sector 15491995
[ 203.574494] ata2: EH complete
[ 203.591184] mlnet[879]: segfault at b9 ip 081427a9 sp bf82b758 error 4 in mlnet[8048000+2ea000]
** Model information
not available
** Loaded modules:
Module Size Used by
loop 9565 0
firewire_sbp2 9858 0
snd_via82xx 15020 0
gameport 6105 1 snd_via82xx
i2c_viapro 4383 0
snd_ac97_codec 79244 1 snd_via82xx
i2c_core 12648 1 i2c_viapro
ac97_bus 710 1 snd_ac97_codec
snd_mpu401_uart 4155 1 snd_via82xx
snd_pcm 46082 2 snd_via82xx,snd_ac97_codec
pcmcia 16438 0
via_ircc 13279 0
snd_rawmidi 12737 1 snd_mpu401_uart
snd_timer 12292 1 snd_pcm
snd_seq_device 3661 1 snd_rawmidi
snd_page_alloc 5021 2 snd_via82xx,snd_pcm
irda 71654 1 via_ircc
yenta_socket 16335 3
shpchp 21184 0
evdev 5520 2
snd 34102 7 snd_via82xx,snd_ac97_codec,snd_mpu401_uart,snd_pcm,snd_rawmidi,snd_timer,snd_seq_device
parport_pc 15747 0
rsrc_nonstatic 7061 1 yenta_socket
pcspkr 1235 0
parport 22170 1 parport_pc
serio_raw 2912 0
soundcore 3294 1 snd
crc_ccitt 1039 1 irda
processor 23267 1
button 3578 0
pcmcia_core 20510 3 pcmcia,yenta_socket,rsrc_nonstatic
pci_hotplug 18013 1 shpchp
ext4 237523 1
mbcache 3482 1 ext4
jbd2 48327 1 ext4
crc16 1027 1 ext4
sd_mod 25825 3
crc_t10dif 1012 1 sd_mod
ata_generic 2015 0
firewire_ohci 16689 0
pata_via 5721 2
via_rhine 14427 0
thermal 9210 0
libata 117275 2 ata_generic,pata_via
uhci_hcd 16021 0
floppy 41131 0
firewire_core 31363 2 firewire_sbp2,firewire_ohci
ehci_hcd 27989 0
mii 2654 1 via_rhine
thermal_sys 9346 2 processor,thermal
scsi_mod 102265 3 firewire_sbp2,sd_mod,libata
usbcore 98214 3 uhci_hcd,ehci_hcd
crc_itu_t 1035 1 firewire_core
nls_base 4445 1 usbcore
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
auto eth0
#iface eth0 inet dhcp
iface eth0 inet static
address 192.168.2.2
netmask 255.255.255.0
gateway 192.168.2.1
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 1000
link/ether 00:40:63:d5:1b:cd brd ff:ff:ff:ff:ff:ff
inet 192.168.2.2/24 brd 192.168.2.255 scope global eth0
inet6 fe80::240:63ff:fed5:1bcd/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 7320 82 0 0 0 0 0 0 7320 82 0 0 0 0 0 0
eth0: 7508738 51331 0 0 0 0 0 0 3919280 48181 0 0 0 0 0 0
*** Protocol statistics:
Ip:
51009 total packets received
0 forwarded
0 incoming packets discarded
51009 incoming packets delivered
47777 requests sent out
Icmp:
2 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 2
24130 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 24130
IcmpMsg:
InType3: 2
OutType3: 24130
Tcp:
116 active connections openings
58 passive connection openings
39 failed connection attempts
20 connection resets received
1 connections established
25240 segments received
23305 segments send out
43 segments retransmited
0 bad segments received.
20799 resets sent
Udp:
414 packets received
24135 packets to unknown port received.
0 packet receive errors
299 packets sent
UdpLite:
TcpExt:
9 resets received for embryonic SYN_RECV sockets
11 TCP sockets finished time wait in fast timer
4 packets rejects in established connections because of timestamp
46 delayed acks sent
Quick ack mode was activated 5 times
390 times the listen queue of a socket overflowed
390 SYNs to LISTEN sockets dropped
1 packets directly queued to recvmsg prequeue.
2445 packet headers predicted
286 acknowledgments not containing data payload received
109 predicted acknowledgments
9 congestion windows recovered without slow start after partial ack
27 other TCP timeouts
5 DSACKs sent for old packets
4 DSACKs received
1 connections reset due to unexpected data
10 connections reset due to early user close
14 connections aborted due to timeout
TCPDSACKIgnoredOld: 1
IpExt:
InMcastPkts: 1215
InBcastPkts: 170
OutBcastPkts: 106
InOctets: 6787290
OutOctets: 3238242
InMcastOctets: 43740
InBcastOctets: 27645
OutBcastOctets: 13326
*** Device features:
eth0: 0x0
lo: 0x13865
** PCI devices:
00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8623 [Apollo CLE266] [1106:3123]
Subsystem: VIA Technologies, Inc. Device [1106:aa01]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+ INTx-
Latency: 8
Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Capabilities: <access denied>
Kernel driver in use: agpgart-via
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP] [1106:b091] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+ INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: d4000000-d5ffffff
Prefetchable memory behind bridge: d0000000-d3ffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:0a.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev 80)
Subsystem: VIA Technologies, Inc. Device [1106:aa01]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 12
Region 0: Memory at d6000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 20000000-23fff000 (prefetchable)
Memory window 1: 24000000-27fff000
I/O window 0: 00001000-000010ff
I/O window 1: 00001400-000014ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
00:0a.1 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev 80)
Subsystem: VIA Technologies, Inc. Device [1106:aa01]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin B routed to IRQ 5
Region 0: Memory at d6005000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
Memory window 0: 28000000-2bfff000 (prefetchable)
Memory window 1: 2c000000-2ffff000
I/O window 0: 00001800-000018ff
I/O window 1: 00001c00-00001cff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
00:0d.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev 80) (prog-if 10 [OHCI])
Subsystem: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (8000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at d600a000 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at b000 [size=128]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 80) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. Device [1106:aa01]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 12
Region 4: I/O ports at b400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 80) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. Device [1106:aa01]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 5
Region 4: I/O ports at b800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 80) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. Device [1106:aa01]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 5
Region 4: I/O ports at bc00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:10.3 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 82) (prog-if 20 [EHCI])
Subsystem: VIA Technologies, Inc. USB 2.0 [1106:3104]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 12
Region 0: Memory at d600b000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8235 ISA Bridge [1106:3177]
Subsystem: VIA Technologies, Inc. Device [1106:aa01]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:11.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: VIA Technologies, Inc. Device [1106:aa01]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 12
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at c000 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_via
00:11.5 Multimedia audio controller [0401]: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller [1106:3059] (rev 50)
Subsystem: VIA Technologies, Inc. Device [1106:aa01]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 5
Region 0: I/O ports at c400 [size=256]
Capabilities: <access denied>
Kernel driver in use: VIA 82xx Audio
00:12.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102 [Rhine-II] [1106:3065] (rev 74)
Subsystem: VIA Technologies, Inc. VT6102 [Rhine II] Embeded Ethernet Controller on VT8235 [1106:0102]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (750ns min, 2000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 12
Region 0: I/O ports at cc00 [size=256]
Region 1: Memory at d600c000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: via-rhine
01:00.0 VGA compatible controller [0300]: VIA Technologies, Inc. VT8623 [Apollo CLE266] integrated CastleRock graphics [1106:3122] (rev 03) (prog-if 00 [VGA controller])
Subsystem: VIA Technologies, Inc. VT8623 [Apollo CLE266] integrated CastleRock graphics [1106:3122]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min)
Interrupt: pin A routed to IRQ 12
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=64M]
Region 1: Memory at d4000000 (32-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at d5000000 [disabled] [size=64K]
Capabilities: <access denied>
02:00.0 Network controller [0280]: Texas Instruments ACX 111 54Mbps Wireless Interface [104c:9066]
Subsystem: Linksys WPC54G v2 802.11g Wireless-G Notebook Adapter [1737:0033]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 12
Region 0: Memory at 24020000 (32-bit, non-prefetchable) [disabled] [size=8K]
Region 1: Memory at 24000000 (32-bit, non-prefetchable) [disabled] [size=128K]
Capabilities: <access denied>
** USB devices:
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (990, 'testing'), (700, 'stable'), (200, 'unstable'), (90, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-486
Locale: LANG=es_ES.UTF-8, LC_CTYPE=es_ES.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-486 depends on:
ii debconf [debconf-2.0] 1.5.35 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98 tools for generating an initramfs
ii linux-base 2.6.32-18 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-486 recommends:
ii firmware-linux-free 2.6.32-18 Binary firmware for various driver
Versions of packages linux-image-2.6.32-5-486 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-486 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-486/prerm/removing-running-kernel-2.6.32-5-486: true
linux-image-2.6.32-5-486/postinst/ignoring-do-bootloader-2.6.32-5-486:
linux-image-2.6.32-5-486/postinst/depmod-error-initrd-2.6.32-5-486: false
linux-image-2.6.32-5-486/postinst/missing-firmware-2.6.32-5-486:
Reply to: